summaryrefslogtreecommitdiffstats
path: root/arch/sh/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/Kconfig')
-rw-r--r--arch/sh/Kconfig795
1 files changed, 795 insertions, 0 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
new file mode 100644
index 000000000..a0593f6ce
--- /dev/null
+++ b/arch/sh/Kconfig
@@ -0,0 +1,795 @@
+# SPDX-License-Identifier: GPL-2.0
+config SUPERH
+ def_bool y
+ select ARCH_32BIT_OFF_T
+ select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
+ select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
+ select ARCH_HAVE_CUSTOM_GPIO_H
+ select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
+ select ARCH_HAS_BINFMT_FLAT if !MMU
+ select ARCH_HAS_CPU_FINALIZE_INIT
+ select ARCH_HAS_CURRENT_STACK_POINTER
+ select ARCH_HAS_GIGANTIC_PAGE
+ select ARCH_HAS_GCOV_PROFILE_ALL
+ select ARCH_HAS_PTE_SPECIAL
+ select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+ select ARCH_HIBERNATION_POSSIBLE if MMU
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select CPU_NO_EFFICIENT_FFS
+ select DMA_DECLARE_COHERENT
+ select GENERIC_ATOMIC64
+ select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+ select GENERIC_IDLE_POLL_SETUP
+ select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP if PCI
+ select GENERIC_SCHED_CLOCK
+ select GENERIC_SMP_IDLE_THREAD
+ select GUP_GET_PTE_LOW_HIGH if X2TLB
+ select HAVE_ARCH_AUDITSYSCALL
+ select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_DEBUG_BUGVERBOSE
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_FAST_GUP if MMU
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACER
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_HW_BREAKPOINT
+ select HAVE_IOREMAP_PROT if MMU && !X2TLB
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZMA
+ select HAVE_KERNEL_LZO
+ select HAVE_KERNEL_XZ
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES
+ select HAVE_MIXED_BREAKPOINTS_REGS
+ select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
+ select HAVE_NMI
+ select HAVE_PATA_PLATFORM
+ select HAVE_PERF_EVENTS
+ select HAVE_REGS_AND_STACK_ACCESS_API
+ select HAVE_UID16
+ select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
+ select HAVE_STACKPROTECTOR
+ select HAVE_SYSCALL_TRACEPOINTS
+ select IRQ_FORCED_THREADING
+ select LOCK_MM_AND_FIND_VMA
+ select MODULES_USE_ELF_RELA
+ select NEED_SG_DMA_LENGTH
+ select NO_DMA if !MMU && !DMA_COHERENT
+ select NO_GENERIC_PCI_IOPORT_MAP if PCI
+ select OLD_SIGACTION
+ select OLD_SIGSUSPEND
+ select PCI_DOMAINS if PCI
+ select PERF_EVENTS
+ select PERF_USE_VMALLOC
+ select RTC_LIB
+ select SPARSE_IRQ
+ select TRACE_IRQFLAGS_SUPPORT
+ help
+ The SuperH is a RISC processor targeted for use in embedded systems
+ and consumer electronics; it was also used in the Sega Dreamcast
+ gaming console. The SuperH port has a home page at
+ <http://www.linux-sh.org/>.
+
+config GENERIC_BUG
+ def_bool y
+ depends on BUG
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+
+config GENERIC_LOCKBREAK
+ def_bool y
+ depends on SMP && PREEMPTION
+
+config ARCH_SUSPEND_POSSIBLE
+ def_bool n
+
+config ARCH_HIBERNATION_POSSIBLE
+ def_bool n
+
+config SYS_SUPPORTS_APM_EMULATION
+ bool
+ select ARCH_SUSPEND_POSSIBLE
+
+config SYS_SUPPORTS_SMP
+ bool
+
+config SYS_SUPPORTS_NUMA
+ bool
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config NO_IOPORT_MAP
+ def_bool !PCI
+ depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \
+ !SH_SOLUTION_ENGINE
+
+config IO_TRAPPED
+ bool
+
+config SWAP_IO_SPACE
+ bool
+
+config DMA_COHERENT
+ bool
+
+config DMA_NONCOHERENT
+ def_bool !NO_DMA && !DMA_COHERENT
+ select ARCH_HAS_DMA_PREP_COHERENT
+ select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+ select DMA_DIRECT_REMAP
+
+config PGTABLE_LEVELS
+ default 3 if X2TLB
+ default 2
+
+menu "System type"
+
+#
+# Processor families
+#
+config CPU_SH2
+ bool
+ select SH_INTC
+
+config CPU_SH2A
+ bool
+ select CPU_SH2
+ select UNCACHED_MAPPING
+
+config CPU_J2
+ bool
+ select CPU_SH2
+ select OF
+ select OF_EARLY_FLATTREE
+
+config CPU_SH3
+ bool
+ select CPU_HAS_INTEVT
+ select CPU_HAS_SR_RB
+ select SH_INTC
+ select SYS_SUPPORTS_SH_TMU
+
+config CPU_SH4
+ bool
+ select ARCH_SUPPORTS_HUGETLBFS if MMU
+ select CPU_HAS_INTEVT
+ select CPU_HAS_SR_RB
+ select CPU_HAS_FPU if !CPU_SH4AL_DSP
+ select SH_INTC
+ select SYS_SUPPORTS_SH_TMU
+
+config CPU_SH4A
+ bool
+ select CPU_SH4
+
+config CPU_SH4AL_DSP
+ bool
+ select CPU_SH4A
+ select CPU_HAS_DSP
+
+config CPU_SHX2
+ bool
+
+config CPU_SHX3
+ bool
+ select DMA_COHERENT
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_NUMA
+
+config ARCH_SHMOBILE
+ bool
+ select ARCH_SUSPEND_POSSIBLE
+ select PM
+
+config CPU_HAS_PMU
+ depends on CPU_SH4 || CPU_SH4A
+ default y
+ bool
+
+choice
+ prompt "Processor sub-type selection"
+
+#
+# Processor subtypes
+#
+
+# SH-2 Processor Support
+
+config CPU_SUBTYPE_SH7619
+ bool "Support SH7619 processor"
+ select CPU_SH2
+ select SYS_SUPPORTS_SH_CMT
+
+config CPU_SUBTYPE_J2
+ bool "Support J2 processor"
+ select CPU_J2
+ select SYS_SUPPORTS_SMP
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+
+# SH-2A Processor Support
+
+config CPU_SUBTYPE_SH7201
+ bool "Support SH7201 processor"
+ select CPU_SH2A
+ select CPU_HAS_FPU
+ select SYS_SUPPORTS_SH_MTU2
+
+config CPU_SUBTYPE_SH7203
+ bool "Support SH7203 processor"
+ select CPU_SH2A
+ select CPU_HAS_FPU
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
+ select PINCTRL
+
+config CPU_SUBTYPE_SH7206
+ bool "Support SH7206 processor"
+ select CPU_SH2A
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
+
+config CPU_SUBTYPE_SH7263
+ bool "Support SH7263 processor"
+ select CPU_SH2A
+ select CPU_HAS_FPU
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
+
+config CPU_SUBTYPE_SH7264
+ bool "Support SH7264 processor"
+ select CPU_SH2A
+ select CPU_HAS_FPU
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
+ select PINCTRL
+
+config CPU_SUBTYPE_SH7269
+ bool "Support SH7269 processor"
+ select CPU_SH2A
+ select CPU_HAS_FPU
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
+ select PINCTRL
+
+config CPU_SUBTYPE_MXG
+ bool "Support MX-G processor"
+ select CPU_SH2A
+ select SYS_SUPPORTS_SH_MTU2
+ help
+ Select MX-G if running on an R8A03022BG part.
+
+# SH-3 Processor Support
+
+config CPU_SUBTYPE_SH7705
+ bool "Support SH7705 processor"
+ select CPU_SH3
+
+config CPU_SUBTYPE_SH7706
+ bool "Support SH7706 processor"
+ select CPU_SH3
+ help
+ Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
+
+config CPU_SUBTYPE_SH7707
+ bool "Support SH7707 processor"
+ select CPU_SH3
+ help
+ Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
+
+config CPU_SUBTYPE_SH7708
+ bool "Support SH7708 processor"
+ select CPU_SH3
+ help
+ Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
+ if you have a 100 Mhz SH-3 HD6417708R CPU.
+
+config CPU_SUBTYPE_SH7709
+ bool "Support SH7709 processor"
+ select CPU_SH3
+ help
+ Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
+
+config CPU_SUBTYPE_SH7710
+ bool "Support SH7710 processor"
+ select CPU_SH3
+ select CPU_HAS_DSP
+ help
+ Select SH7710 if you have a SH3-DSP SH7710 CPU.
+
+config CPU_SUBTYPE_SH7712
+ bool "Support SH7712 processor"
+ select CPU_SH3
+ select CPU_HAS_DSP
+ help
+ Select SH7712 if you have a SH3-DSP SH7712 CPU.
+
+config CPU_SUBTYPE_SH7720
+ bool "Support SH7720 processor"
+ select CPU_SH3
+ select CPU_HAS_DSP
+ select SYS_SUPPORTS_SH_CMT
+ select USB_OHCI_SH if USB_OHCI_HCD
+ select PINCTRL
+ help
+ Select SH7720 if you have a SH3-DSP SH7720 CPU.
+
+config CPU_SUBTYPE_SH7721
+ bool "Support SH7721 processor"
+ select CPU_SH3
+ select CPU_HAS_DSP
+ select SYS_SUPPORTS_SH_CMT
+ select USB_OHCI_SH if USB_OHCI_HCD
+ help
+ Select SH7721 if you have a SH3-DSP SH7721 CPU.
+
+# SH-4 Processor Support
+
+config CPU_SUBTYPE_SH7750
+ bool "Support SH7750 processor"
+ select CPU_SH4
+ help
+ Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
+
+config CPU_SUBTYPE_SH7091
+ bool "Support SH7091 processor"
+ select CPU_SH4
+ help
+ Select SH7091 if you have an SH-4 based Sega device (such as
+ the Dreamcast, Naomi, and Naomi 2).
+
+config CPU_SUBTYPE_SH7750R
+ bool "Support SH7750R processor"
+ select CPU_SH4
+
+config CPU_SUBTYPE_SH7750S
+ bool "Support SH7750S processor"
+ select CPU_SH4
+
+config CPU_SUBTYPE_SH7751
+ bool "Support SH7751 processor"
+ select CPU_SH4
+ help
+ Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
+ or if you have a HD6417751R CPU.
+
+config CPU_SUBTYPE_SH7751R
+ bool "Support SH7751R processor"
+ select CPU_SH4
+
+config CPU_SUBTYPE_SH7760
+ bool "Support SH7760 processor"
+ select CPU_SH4
+
+config CPU_SUBTYPE_SH4_202
+ bool "Support SH4-202 processor"
+ select CPU_SH4
+
+# SH-4A Processor Support
+
+config CPU_SUBTYPE_SH7723
+ bool "Support SH7723 processor"
+ select CPU_SH4A
+ select CPU_SHX2
+ select ARCH_SHMOBILE
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_SH_CMT
+ select PINCTRL
+ help
+ Select SH7723 if you have an SH-MobileR2 CPU.
+
+config CPU_SUBTYPE_SH7724
+ bool "Support SH7724 processor"
+ select CPU_SH4A
+ select CPU_SHX2
+ select ARCH_SHMOBILE
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_SH_CMT
+ select PINCTRL
+ help
+ Select SH7724 if you have an SH-MobileR2R CPU.
+
+config CPU_SUBTYPE_SH7734
+ bool "Support SH7734 processor"
+ select CPU_SH4A
+ select CPU_SHX2
+ select PINCTRL
+ help
+ Select SH7734 if you have a SH4A SH7734 CPU.
+
+config CPU_SUBTYPE_SH7757
+ bool "Support SH7757 processor"
+ select CPU_SH4A
+ select CPU_SHX2
+ select PINCTRL
+ help
+ Select SH7757 if you have a SH4A SH7757 CPU.
+
+config CPU_SUBTYPE_SH7763
+ bool "Support SH7763 processor"
+ select CPU_SH4A
+ select USB_OHCI_SH if USB_OHCI_HCD
+ help
+ Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
+
+config CPU_SUBTYPE_SH7770
+ bool "Support SH7770 processor"
+ select CPU_SH4A
+
+config CPU_SUBTYPE_SH7780
+ bool "Support SH7780 processor"
+ select CPU_SH4A
+
+config CPU_SUBTYPE_SH7785
+ bool "Support SH7785 processor"
+ select CPU_SH4A
+ select CPU_SHX2
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
+ select PINCTRL
+
+config CPU_SUBTYPE_SH7786
+ bool "Support SH7786 processor"
+ select CPU_SH4A
+ select CPU_SHX3
+ select CPU_HAS_PTEAEX
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select USB_OHCI_SH if USB_OHCI_HCD
+ select USB_EHCI_SH if USB_EHCI_HCD
+ select PINCTRL
+
+config CPU_SUBTYPE_SHX3
+ bool "Support SH-X3 processor"
+ select CPU_SH4A
+ select CPU_SHX3
+ select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GPIOLIB
+ select PINCTRL
+
+# SH4AL-DSP Processor Support
+
+config CPU_SUBTYPE_SH7343
+ bool "Support SH7343 processor"
+ select CPU_SH4AL_DSP
+ select ARCH_SHMOBILE
+ select SYS_SUPPORTS_SH_CMT
+
+config CPU_SUBTYPE_SH7722
+ bool "Support SH7722 processor"
+ select CPU_SH4AL_DSP
+ select CPU_SHX2
+ select ARCH_SHMOBILE
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_SH_CMT
+ select PINCTRL
+
+config CPU_SUBTYPE_SH7366
+ bool "Support SH7366 processor"
+ select CPU_SH4AL_DSP
+ select CPU_SHX2
+ select ARCH_SHMOBILE
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_SH_CMT
+
+endchoice
+
+source "arch/sh/mm/Kconfig"
+
+source "arch/sh/Kconfig.cpu"
+
+source "arch/sh/boards/Kconfig"
+
+menu "Timer and clock configuration"
+
+config SH_PCLK_FREQ
+ int "Peripheral clock frequency (in Hz)"
+ depends on SH_CLK_CPG_LEGACY
+ default "31250000" if CPU_SUBTYPE_SH7619
+ default "33333333" if CPU_SUBTYPE_SH7770 || \
+ CPU_SUBTYPE_SH7760 || \
+ CPU_SUBTYPE_SH7705 || \
+ CPU_SUBTYPE_SH7203 || \
+ CPU_SUBTYPE_SH7206 || \
+ CPU_SUBTYPE_SH7263 || \
+ CPU_SUBTYPE_MXG
+ default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
+ default "66000000" if CPU_SUBTYPE_SH4_202
+ default "50000000"
+ help
+ This option is used to specify the peripheral clock frequency.
+ This is necessary for determining the reference clock value on
+ platforms lacking an RTC.
+
+config SH_CLK_CPG
+ def_bool y
+
+config SH_CLK_CPG_LEGACY
+ depends on SH_CLK_CPG
+ def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
+ !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
+ !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
+ !CPU_SUBTYPE_SH7269
+
+endmenu
+
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
+
+source "arch/sh/drivers/Kconfig"
+
+endmenu
+
+menu "Kernel features"
+
+source "kernel/Kconfig.hz"
+
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on MMU
+ select KEXEC_CORE
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. As of this writing the exact hardware
+ interface is strongly in flux, so no good recommendation can be
+ made.
+
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on BROKEN_ON_SMP
+ help
+ Generate crash dump after being started by kexec.
+ This should be normally only set in special crash dump kernels
+ which are loaded in the main kernel with kexec-tools into
+ a specially reserved region and then later executed after
+ a crash by kdump/kexec. The crash dump kernel must be compiled
+ to a memory address not used by the main kernel using
+ PHYSICAL_START.
+
+ For more details see Documentation/admin-guide/kdump/kdump.rst
+
+config KEXEC_JUMP
+ bool "kexec jump (EXPERIMENTAL)"
+ depends on KEXEC && HIBERNATION
+ help
+ Jump between original kernel and kexeced kernel and invoke
+ code via KEXEC
+
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
+ default MEMORY_START
+ help
+ This gives the physical address where the kernel is loaded
+ and is ordinarily the same as MEMORY_START.
+
+ Different values are primarily used in the case of kexec on panic
+ where the fail safe kernel needs to run at a different address
+ than the panic-ed kernel.
+
+config SMP
+ bool "Symmetric multi-processing support"
+ depends on SYS_SUPPORTS_SMP
+ help
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you say N here, the kernel will run on uni- and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ uniprocessor machines. On a uniprocessor machine, the kernel
+ will run faster if you say N here.
+
+ People using multiprocessor machines who say Y here should also say
+ Y to "Enhanced Real Time Clock Support", below.
+
+ See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
+ available at <https://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-32)"
+ range 2 32
+ depends on SMP
+ default "4" if CPU_SUBTYPE_SHX3
+ default "2"
+ help
+ This allows you to specify the maximum number of CPUs which this
+ kernel will support. The maximum supported value is 32 and the
+ minimum value which makes sense is 2.
+
+ This is purely to save memory - each supported CPU adds
+ approximately eight kilobytes to the kernel image.
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP
+ help
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu.
+
+config GUSA
+ def_bool y
+ depends on !SMP
+ help
+ This enables support for gUSA (general UserSpace Atomicity).
+ This is the default implementation for both UP and non-ll/sc
+ CPUs, and is used by the libc, amongst others.
+
+ For additional information, design information can be found
+ in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
+
+ This should only be disabled for special cases where alternate
+ atomicity implementations exist.
+
+config GUSA_RB
+ bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
+ depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
+ help
+ Enabling this option will allow the kernel to implement some
+ atomic operations using a software implementation of load-locked/
+ store-conditional (LLSC). On machines which do not have hardware
+ LLSC, this should be more efficient than the other alternative of
+ disabling interrupts around the atomic sequence.
+
+config HW_PERF_EVENTS
+ bool "Enable hardware performance counter support for perf events"
+ depends on PERF_EVENTS && CPU_HAS_PMU
+ default y
+ help
+ Enable hardware performance counter support for perf events. If
+ disabled, perf events will use software events only.
+
+source "drivers/sh/Kconfig"
+
+endmenu
+
+menu "Boot options"
+
+config USE_BUILTIN_DTB
+ bool "Use builtin DTB"
+ default n
+ depends on SH_DEVICE_TREE
+ help
+ Link a device tree blob for particular hardware into the kernel,
+ suppressing use of the DTB pointer provided by the bootloader.
+ This option should only be used with legacy bootloaders that are
+ not capable of providing a DTB to the kernel, or for experimental
+ hardware without stable device tree bindings.
+
+config BUILTIN_DTB_SOURCE
+ string "Source file for builtin DTB"
+ default ""
+ depends on USE_BUILTIN_DTB
+ help
+ Base name (without suffix, relative to arch/sh/boot/dts) for the
+ a DTS file that will be used to produce the DTB linked into the
+ kernel.
+
+config ZERO_PAGE_OFFSET
+ hex
+ default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
+ SH_7751_SOLUTION_ENGINE
+ default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
+ default "0x00002000" if PAGE_SIZE_8KB
+ default "0x00001000"
+ help
+ This sets the default offset of zero page.
+
+config BOOT_LINK_OFFSET
+ hex
+ default "0x00210000" if SH_SHMIN
+ default "0x00810000" if SH_7780_SOLUTION_ENGINE
+ default "0x009e0000" if SH_TITAN
+ default "0x01800000" if SH_SDK7780
+ default "0x02000000" if SH_EDOSK7760
+ default "0x00800000"
+ help
+ This option allows you to set the link address offset of the zImage.
+ This can be useful if you are on a board which has a small amount of
+ memory.
+
+config ENTRY_OFFSET
+ hex
+ default "0x00001000" if PAGE_SIZE_4KB
+ default "0x00002000" if PAGE_SIZE_8KB
+ default "0x00004000" if PAGE_SIZE_16KB
+ default "0x00010000" if PAGE_SIZE_64KB
+ default "0x00000000"
+
+config ROMIMAGE_MMCIF
+ bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
+ depends on CPU_SUBTYPE_SH7724
+ help
+ Say Y here to include experimental MMCIF loading code in
+ romImage. With this enabled it is possible to write the romImage
+ kernel image to an MMC card and boot the kernel straight from
+ the reset vector. At reset the processor Mask ROM will load the
+ first part of the romImage which in turn loads the rest the kernel
+ image to RAM using the MMCIF hardware block.
+
+choice
+ prompt "Kernel command line"
+ optional
+ default CMDLINE_OVERWRITE
+ help
+ Setting this option allows the kernel command line arguments
+ to be set.
+
+config CMDLINE_OVERWRITE
+ bool "Overwrite bootloader kernel arguments"
+ help
+ Given string will overwrite any arguments passed in by
+ a bootloader.
+
+config CMDLINE_EXTEND
+ bool "Extend bootloader kernel arguments"
+ help
+ Given string will be concatenated with arguments passed in
+ by a bootloader.
+
+endchoice
+
+config CMDLINE
+ string "Kernel command line arguments string"
+ depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
+ default "console=ttySC1,115200"
+
+endmenu
+
+menu "Bus options"
+
+config SUPERHYWAY
+ tristate "SuperHyway Bus support"
+ depends on CPU_SUBTYPE_SH4_202
+
+config MAPLE
+ bool "Maple Bus support"
+ depends on SH_DREAMCAST
+ help
+ The Maple Bus is SEGA's serial communication bus for peripherals
+ on the Dreamcast. Without this bus support you won't be able to
+ get your Dreamcast keyboard etc to work, so most users
+ probably want to say 'Y' here, unless you are only using the
+ Dreamcast with a serial line terminal or a remote network
+ connection.
+
+endmenu
+
+menu "Power management options (EXPERIMENTAL)"
+
+source "kernel/power/Kconfig"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu