summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/mach-migor
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-migor')
-rw-r--r--arch/sh/boards/mach-migor/Kconfig16
-rw-r--r--arch/sh/boards/mach-migor/Makefile3
-rw-r--r--arch/sh/boards/mach-migor/lcd_qvga.c163
-rw-r--r--arch/sh/boards/mach-migor/sdram.S66
-rw-r--r--arch/sh/boards/mach-migor/setup.c649
5 files changed, 897 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
new file mode 100644
index 000000000..fb64a10e2
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+if SH_MIGOR
+
+choice
+ prompt "Migo-R LCD Panel Board Selection"
+ default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+ bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+ bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
new file mode 100644
index 000000000..c223d759f
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y := setup.o sdram.o
+obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
new file mode 100644
index 000000000..4ebf13051
--- /dev/null
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <cpu/sh7722.h>
+#include <mach/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+ gpio_set_value(GPIO_PTH2, 0);
+ mdelay(2);
+ gpio_set_value(GPIO_PTH2, 1);
+ mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+ unsigned long tmp1, tmp2;
+
+ tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+ tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+ return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg, unsigned short data)
+{
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg, unsigned short data)
+{
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+ sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short reg)
+{
+ unsigned long data;
+
+ sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+ data = sys_ops->read_data(sys_ops_handle);
+ return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+ struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+ unsigned short const *data, int no_data)
+{
+ int i;
+
+ for (i = 0; i < no_data; i += 2)
+ write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+ 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+ 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+ 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+ 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+ 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+ 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+ 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+ 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+ 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+ 0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+ 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+ 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+ unsigned long xres = 320;
+ unsigned long yres = 240;
+ int k;
+
+ reset_lcd_module();
+ migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+ if (read_reg16(sohandle, so, 0) != 0x1505)
+ return -ENODEV;
+
+ pr_info("Migo-R QVGA LCD Module detected.\n");
+
+ migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+ write_reg16(sohandle, so, 0x00A4, 0x0001);
+ mdelay(10);
+
+ migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+ mdelay(100);
+
+ migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+ write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+ write_reg16(sohandle, so, 0x0051, 0x00ef);
+ write_reg16(sohandle, so, 0x0052, 0x0000);
+ write_reg16(sohandle, so, 0x0053, xres - 1);
+
+ migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+ mdelay(10);
+
+ migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+ mdelay(40);
+
+ /* clear GRAM to avoid displaying garbage */
+
+ write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+ write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+ for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+ write_reg16(sohandle, so, 0x0022, 0x0000);
+
+ write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+ write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+ write_reg16(sohandle, so, 0x0007, 0x0173);
+ mdelay(40);
+
+ /* enable display */
+ write_reg(sohandle, so, 0x00, 0x22);
+ mdelay(100);
+ return 0;
+}
diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S
new file mode 100644
index 000000000..3a6bee127
--- /dev/null
+++ b/arch/sh/boards/mach-migor/sdram.S
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Migo-R sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(migor_sdram_enter_start)
+
+ /* SBSC: disable power down and put in self-refresh mode */
+ mov.l 1f, r4
+ mov.l 2f, r1
+ mov.l @r4, r2
+ or r1, r2
+ mov.l 3f, r3
+ and r3, r2
+ mov.l r2, @r4
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+2: .long 0x00000400
+3: .long 0xffff7fff
+ENTRY(migor_sdram_enter_end)
+
+ .balign 4
+ENTRY(migor_sdram_leave_start)
+
+ /* SBSC: set auto-refresh mode */
+ mov.l 1f, r4
+ mov.l @r4, r0
+ mov.l 4f, r1
+ and r1, r0
+ mov.l r0, @r4
+ mov.l 6f, r4
+ mov.l 8f, r0
+ mov.l @r4, r1
+ mov #-1, r4
+ add r4, r1
+ or r1, r0
+ mov.l 7f, r1
+ mov.l r0, @r1
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+4: .long 0xfffffbff
+6: .long 0xfe40001c /* RTCOR */
+7: .long 0xfe400018 /* RTCNT */
+8: .long 0xa55a0000
+ENTRY(migor_sdram_leave_end)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
new file mode 100644
index 000000000..773ee767d
--- /dev/null
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -0,0 +1,649 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ */
+#include <linux/clkdev.h>
+#include <linux/dma-map-ops.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/memblock.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/platnand.h>
+#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/drv-intf/renesas-ceu.h>
+#include <media/i2c/ov772x.h>
+#include <media/i2c/tw9910.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/suspend.h>
+#include <mach/migor.h>
+#include <cpu/sh7722.h>
+
+/* Address IRQ Size Bus Description
+ * 0x00000000 64MB 16 NOR Flash (SP29PL256N)
+ * 0x0c000000 64MB 64 SDRAM (2xK4M563233G)
+ * 0x10000000 IRQ0 16 Ethernet (SMC91C111)
+ * 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596)
+ * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
+ */
+
+#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
+static phys_addr_t ceu_dma_membase;
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+ [0] = {
+ .name = "SMC91C111" ,
+ .start = 0x10000300,
+ .end = 0x1000030f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x600), /* IRQ0 */
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_eth_device = {
+ .name = "smc91x",
+ .num_resources = ARRAY_SIZE(smc91x_eth_resources),
+ .resource = smc91x_eth_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+ .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+ .scan_timing = 3,
+ .delay = 5,
+ .keycodes = {
+ 0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+ 0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
+ 0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
+ 0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+ 0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+ },
+};
+
+static struct resource sh_keysc_resources[] = {
+ [0] = {
+ .start = 0x044b0000,
+ .end = 0x044b000f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0xbe0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh_keysc_device = {
+ .name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
+ .num_resources = ARRAY_SIZE(sh_keysc_resources),
+ .resource = sh_keysc_resources,
+ .dev = {
+ .platform_data = &sh_keysc_info,
+ },
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (1 * 1024 * 1024),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (15 * 1024 * 1024),
+ },
+ {
+ .name = "other",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+ .width = 2,
+ .parts = migor_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0x00000000,
+ .end = 0x03ffffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device migor_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = migor_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(migor_nor_flash_resources),
+ .dev = {
+ .platform_data = &migor_nor_flash_data,
+ },
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+ {
+ .name = "nanddata1",
+ .offset = 0x0,
+ .size = 512 * 1024 * 1024,
+ },
+ {
+ .name = "nanddata2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024 * 1024,
+ },
+};
+
+static void migor_nand_flash_cmd_ctl(struct nand_chip *chip, int cmd,
+ unsigned int ctrl)
+{
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, chip->legacy.IO_ADDR_W + 0x00400000);
+ else if (ctrl & NAND_ALE)
+ writeb(cmd, chip->legacy.IO_ADDR_W + 0x00800000);
+ else
+ writeb(cmd, chip->legacy.IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct nand_chip *chip)
+{
+ return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
+}
+
+static struct platform_nand_data migor_nand_flash_data = {
+ .chip = {
+ .nr_chips = 1,
+ .partitions = migor_nand_flash_partitions,
+ .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+ .chip_delay = 20,
+ },
+ .ctrl = {
+ .dev_ready = migor_nand_flash_ready,
+ .cmd_ctrl = migor_nand_flash_cmd_ctl,
+ },
+};
+
+static struct resource migor_nand_flash_resources[] = {
+ [0] = {
+ .name = "NAND Flash",
+ .start = 0x18000000,
+ .end = 0x18ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device migor_nand_flash_device = {
+ .name = "gen_nand",
+ .resource = migor_nand_flash_resources,
+ .num_resources = ARRAY_SIZE(migor_nand_flash_resources),
+ .dev = {
+ .platform_data = &migor_nand_flash_data,
+ }
+};
+
+static const struct fb_videomode migor_lcd_modes[] = {
+ {
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 64,
+ .right_margin = 16,
+ .hsync_len = 120,
+ .sync = 0,
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+ .name = "PH240320T",
+ .xres = 320,
+ .yres = 240,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .sync = FB_SYNC_HOR_HIGH_ACT,
+#endif
+ .upper_margin = 1,
+ .lower_margin = 17,
+ .vsync_len = 2,
+ },
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .interface_type = RGB16,
+ .clock_divider = 2,
+ .lcd_modes = migor_lcd_modes,
+ .num_modes = ARRAY_SIZE(migor_lcd_modes),
+ .panel_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
+ }
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+ .clock_source = LCDC_CLK_PERIPHERAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .interface_type = SYS16A,
+ .clock_divider = 10,
+ .lcd_modes = migor_lcd_modes,
+ .num_modes = ARRAY_SIZE(migor_lcd_modes),
+ .panel_cfg = {
+ .width = 49, /* 2.4 inch */
+ .height = 37,
+ .setup_sys = migor_lcd_qvga_setup,
+ },
+ .sys_bus_cfg = {
+ .ldmt2r = 0x06000a09,
+ .ldmt3r = 0x180e3418,
+ /* set 1s delay to encourage fsync() */
+ .deferred_io_msec = 1000,
+ },
+ }
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe942fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x580),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device migor_lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(migor_lcdc_resources),
+ .resource = migor_lcdc_resources,
+ .dev = {
+ .platform_data = &sh_mobile_lcdc_info,
+ },
+};
+
+static struct ceu_platform_data ceu_pdata = {
+ .num_subdevs = 2,
+ .subdevs = {
+ { /* [0] = ov772x */
+ .flags = 0,
+ .bus_width = 8,
+ .bus_shift = 0,
+ .i2c_adapter_id = 0,
+ .i2c_address = 0x21,
+ },
+ { /* [1] = tw9910 */
+ .flags = 0,
+ .bus_width = 8,
+ .bus_shift = 0,
+ .i2c_adapter_id = 0,
+ .i2c_address = 0x45,
+ },
+ },
+};
+
+static struct resource migor_ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x880),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device migor_ceu_device = {
+ .name = "renesas-ceu",
+ .id = 0, /* ceu.0 */
+ .num_resources = ARRAY_SIZE(migor_ceu_resources),
+ .resource = migor_ceu_resources,
+ .dev = {
+ .platform_data = &ceu_pdata,
+ },
+};
+
+/* Powerdown/reset gpios for CEU image sensors */
+static struct gpiod_lookup_table ov7725_gpios = {
+ .dev_id = "0-0021",
+ .table = {
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "powerdown",
+ GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "reset", GPIO_ACTIVE_LOW),
+ },
+};
+
+static struct gpiod_lookup_table tw9910_gpios = {
+ .dev_id = "0-0045",
+ .table = {
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT2, "pdn", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
+ },
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct resource sdhi_cn9_resources[] = {
+ [0] = {
+ .name = "SDHI",
+ .start = 0x04ce0000,
+ .end = 0x04ce00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0xe80),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct tmio_mmc_data sh7724_sdhi_data = {
+ .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
+ .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
+ .capabilities = MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi_cn9_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi_cn9_resources),
+ .resource = sdhi_cn9_resources,
+ .dev = {
+ .platform_data = &sh7724_sdhi_data,
+ },
+};
+
+static struct ov772x_camera_info ov7725_info = {
+ .flags = 0,
+};
+
+static struct tw9910_video_info tw9910_info = {
+ .buswidth = 8,
+ .mpout = TW9910_MPO_FIELD,
+};
+
+static struct i2c_board_info migor_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rs5c372b", 0x32),
+ },
+ {
+ I2C_BOARD_INFO("migor_ts", 0x51),
+ .irq = evt2irq(0x6c0), /* IRQ6 */
+ },
+ {
+ I2C_BOARD_INFO("wm8978", 0x1a),
+ },
+ {
+ I2C_BOARD_INFO("ov772x", 0x21),
+ .platform_data = &ov7725_info,
+ },
+ {
+ I2C_BOARD_INFO("tw9910", 0x45),
+ .platform_data = &tw9910_info,
+ },
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+ &smc91x_eth_device,
+ &sh_keysc_device,
+ &migor_lcdc_device,
+ &migor_nor_flash_device,
+ &migor_nand_flash_device,
+ &sdhi_cn9_device,
+};
+
+extern char migor_sdram_enter_start;
+extern char migor_sdram_enter_end;
+extern char migor_sdram_leave_start;
+extern char migor_sdram_leave_end;
+
+static int __init migor_devices_setup(void)
+{
+ struct clk *video_clk;
+
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &migor_sdram_enter_start,
+ &migor_sdram_enter_end,
+ &migor_sdram_leave_start,
+ &migor_sdram_leave_end);
+
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+ /* Let D11 LED show STATUS0 */
+ gpio_request(GPIO_FN_STATUS0, NULL);
+
+ /* Lit D12 LED show PDSTATUS */
+ gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+ /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
+ gpio_request(GPIO_FN_IRQ0, NULL);
+ __raw_writel(0x00003400, BSC_CS4BCR);
+ __raw_writel(0x00110080, BSC_CS4WCR);
+
+ /* KEYSC */
+ gpio_request(GPIO_FN_KEYOUT0, NULL);
+ gpio_request(GPIO_FN_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+ gpio_request(GPIO_FN_KEYIN1, NULL);
+ gpio_request(GPIO_FN_KEYIN2, NULL);
+ gpio_request(GPIO_FN_KEYIN3, NULL);
+ gpio_request(GPIO_FN_KEYIN4, NULL);
+ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+ /* NAND Flash */
+ gpio_request(GPIO_FN_CS6A_CE2B, NULL);
+ __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
+ gpio_request(GPIO_PTA1, NULL);
+ gpio_direction_input(GPIO_PTA1);
+
+ /* SDHI */
+ gpio_request(GPIO_FN_SDHICD, NULL);
+ gpio_request(GPIO_FN_SDHIWP, NULL);
+ gpio_request(GPIO_FN_SDHID3, NULL);
+ gpio_request(GPIO_FN_SDHID2, NULL);
+ gpio_request(GPIO_FN_SDHID1, NULL);
+ gpio_request(GPIO_FN_SDHID0, NULL);
+ gpio_request(GPIO_FN_SDHICMD, NULL);
+ gpio_request(GPIO_FN_SDHICLK, NULL);
+
+ /* Touch Panel */
+ gpio_request(GPIO_FN_IRQ6, NULL);
+
+ /* LCD Panel */
+#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
+ gpio_request(GPIO_FN_LCDD17, NULL);
+ gpio_request(GPIO_FN_LCDD16, NULL);
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDRS, NULL);
+ gpio_request(GPIO_FN_LCDCS, NULL);
+ gpio_request(GPIO_FN_LCDRD, NULL);
+ gpio_request(GPIO_FN_LCDWR, NULL);
+ gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
+ gpio_direction_output(GPIO_PTH2, 1);
+#endif
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD9, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDD0, NULL);
+ gpio_request(GPIO_FN_LCDLCLK, NULL);
+ gpio_request(GPIO_FN_LCDDCK, NULL);
+ gpio_request(GPIO_FN_LCDVEPWC, NULL);
+ gpio_request(GPIO_FN_LCDVCPWC, NULL);
+ gpio_request(GPIO_FN_LCDVSYN, NULL);
+ gpio_request(GPIO_FN_LCDHSYN, NULL);
+ gpio_request(GPIO_FN_LCDDISP, NULL);
+ gpio_request(GPIO_FN_LCDDON, NULL);
+#endif
+
+ /* CEU */
+ gpio_request(GPIO_FN_VIO_CLK2, NULL);
+ gpio_request(GPIO_FN_VIO_VD2, NULL);
+ gpio_request(GPIO_FN_VIO_HD2, NULL);
+ gpio_request(GPIO_FN_VIO_FLD, NULL);
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+ gpio_request(GPIO_FN_VIO_D15, NULL);
+ gpio_request(GPIO_FN_VIO_D14, NULL);
+ gpio_request(GPIO_FN_VIO_D13, NULL);
+ gpio_request(GPIO_FN_VIO_D12, NULL);
+ gpio_request(GPIO_FN_VIO_D11, NULL);
+ gpio_request(GPIO_FN_VIO_D10, NULL);
+ gpio_request(GPIO_FN_VIO_D9, NULL);
+ gpio_request(GPIO_FN_VIO_D8, NULL);
+
+ __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
+
+ /* SIU: Port B */
+ gpio_request(GPIO_FN_SIUBOLR, NULL);
+ gpio_request(GPIO_FN_SIUBOBT, NULL);
+ gpio_request(GPIO_FN_SIUBISLD, NULL);
+ gpio_request(GPIO_FN_SIUBOSLD, NULL);
+ gpio_request(GPIO_FN_SIUMCKB, NULL);
+
+ /*
+ * The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
+ * output. Need only SIUB, set to output for master mode (table 34.2)
+ */
+ __raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
+
+ /*
+ * Use 10 MHz VIO_CKO instead of 24 MHz to work around signal quality
+ * issues on Panel Board V2.1.
+ */
+ video_clk = clk_get(NULL, "video_clk");
+ if (!IS_ERR(video_clk)) {
+ clk_set_rate(video_clk, clk_round_rate(video_clk, 10000000));
+ clk_put(video_clk);
+ }
+
+ /* Add a clock alias for ov7725 xclk source. */
+ clk_add_alias(NULL, "0-0021", "video_clk", NULL);
+
+ /* Register GPIOs for video sources. */
+ gpiod_add_lookup_table(&ov7725_gpios);
+ gpiod_add_lookup_table(&tw9910_gpios);
+
+ i2c_register_board_info(0, migor_i2c_devices,
+ ARRAY_SIZE(migor_i2c_devices));
+
+ /* Initialize CEU platform device separately to map memory first */
+ device_initialize(&migor_ceu_device.dev);
+ dma_declare_coherent_memory(&migor_ceu_device.dev,
+ ceu_dma_membase, ceu_dma_membase,
+ CEU_BUFFER_MEMORY_SIZE);
+
+ platform_device_add(&migor_ceu_device);
+
+ return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+arch_initcall(migor_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int migor_mode_pins(void)
+{
+ /* MD0=1, MD1=1, MD2=0: Clock Mode 3
+ * MD3=0: 16-bit Area0 Bus Width
+ * MD5=1: Little Endian
+ * TSTMD=1, MD8=0: Test Mode Disabled
+ */
+ return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
+}
+
+/* Reserve a portion of memory for CEU buffers */
+static void __init migor_mv_mem_reserve(void)
+{
+ phys_addr_t phys;
+ phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
+
+ phys = memblock_phys_alloc(size, PAGE_SIZE);
+ if (!phys)
+ panic("Failed to allocate CEU memory\n");
+
+ memblock_phys_free(phys, size);
+ memblock_remove(phys, size);
+
+ ceu_dma_membase = phys;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_migor __initmv = {
+ .mv_name = "Migo-R",
+ .mv_mode_pins = migor_mode_pins,
+ .mv_mem_reserve = migor_mv_mem_reserve,
+};