1 files changed, 309 insertions, 0 deletions
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
new file mode 100644
index 000000000..c2e322189
--- /dev/null
+++ b/arch/x86/include/asm/special_insns.h
@@ -0,0 +1,309 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_SPECIAL_INSNS_H
+#define _ASM_X86_SPECIAL_INSNS_H
+
+
+#ifdef __KERNEL__
+
+#include <asm/nops.h>
+#include <asm/processor-flags.h>
+#include <linux/irqflags.h>
+#include <linux/jump_label.h>
+
+/*
+ * The compiler should not reorder volatile asm statements with respect to each
+ * other: they should execute in program order. However GCC 4.9.x and 5.x have
+ * a bug (which was fixed in 8.1, 7.3 and 6.5) where they might reorder
+ * volatile asm. The write functions are not affected since they have memory
+ * clobbers preventing reordering. To prevent reads from being reordered with
+ * respect to writes, use a dummy memory operand.
+ */
+
+#define __FORCE_ORDER "m"(*(unsigned int *)0x1000UL)
+
+void native_write_cr0(unsigned long val);
+
+static inline unsigned long native_read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr0,%0\n\t" : "=r" (val) : __FORCE_ORDER);
+	return val;
+}
+
+static __always_inline unsigned long native_read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr2,%0\n\t" : "=r" (val) : __FORCE_ORDER);
+	return val;
+}
+
+static __always_inline void native_write_cr2(unsigned long val)
+{
+	asm volatile("mov %0,%%cr2": : "r" (val) : "memory");
+}
+
+static inline unsigned long __native_read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr3,%0\n\t" : "=r" (val) : __FORCE_ORDER);
+	return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+	asm volatile("mov %0,%%cr3": : "r" (val) : "memory");
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+	unsigned long val;
+#ifdef CONFIG_X86_32
+	/*
+	 * This could fault if CR4 does not exist.  Non-existent CR4
+	 * is functionally equivalent to CR4 == 0.  Keep it simple and pretend
+	 * that CR4 == 0 on CPUs that don't have CR4.
+	 */
+	asm volatile("1: mov %%cr4, %0\n"
+		     "2:\n"
+		     _ASM_EXTABLE(1b, 2b)
+		     : "=r" (val) : "0" (0), __FORCE_ORDER);
+#else
+	/* CR4 always exists on x86_64. */
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val) : __FORCE_ORDER);
+#endif
+	return val;
+}
+
+void native_write_cr4(unsigned long val);
+
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+static inline u32 rdpkru(void)
+{
+	u32 ecx = 0;
+	u32 edx, pkru;
+
+	/*
+	 * "rdpkru" instruction.  Places PKRU contents in to EAX,
+	 * clears EDX and requires that ecx=0.
+	 */
+	asm volatile(".byte 0x0f,0x01,0xee\n\t"
+		     : "=a" (pkru), "=d" (edx)
+		     : "c" (ecx));
+	return pkru;
+}
+
+static inline void wrpkru(u32 pkru)
+{
+	u32 ecx = 0, edx = 0;
+
+	/*
+	 * "wrpkru" instruction.  Loads contents in EAX to PKRU,
+	 * requires that ecx = edx = 0.
+	 */
+	asm volatile(".byte 0x0f,0x01,0xef\n\t"
+		     : : "a" (pkru), "c"(ecx), "d"(edx));
+}
+
+#else
+static inline u32 rdpkru(void)
+{
+	return 0;
+}
+
+static inline void wrpkru(u32 pkru)
+{
+}
+#endif
+
+static inline void native_wbinvd(void)
+{
+	asm volatile("wbinvd": : :"memory");
+}
+
+extern asmlinkage void asm_load_gs_index(unsigned int selector);
+
+static inline void native_load_gs_index(unsigned int selector)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	asm_load_gs_index(selector);
+	local_irq_restore(flags);
+}
+
+static inline unsigned long __read_cr4(void)
+{
+	return native_read_cr4();
+}
+
+#ifdef CONFIG_PARAVIRT_XXL
+#include <asm/paravirt.h>
+#else
+
+static inline unsigned long read_cr0(void)
+{
+	return native_read_cr0();
+}
+
+static inline void write_cr0(unsigned long x)
+{
+	native_write_cr0(x);
+}
+
+static __always_inline unsigned long read_cr2(void)
+{
+	return native_read_cr2();
+}
+
+static __always_inline void write_cr2(unsigned long x)
+{
+	native_write_cr2(x);
+}
+
+/*
+ * Careful!  CR3 contains more than just an address.  You probably want
+ * read_cr3_pa() instead.
+ */
+static inline unsigned long __read_cr3(void)
+{
+	return __native_read_cr3();
+}
+
+static inline void write_cr3(unsigned long x)
+{
+	native_write_cr3(x);
+}
+
+static inline void __write_cr4(unsigned long x)
+{
+	native_write_cr4(x);
+}
+
+static inline void wbinvd(void)
+{
+	native_wbinvd();
+}
+
+
+static inline void load_gs_index(unsigned int selector)
+{
+#ifdef CONFIG_X86_64
+	native_load_gs_index(selector);
+#else
+	loadsegment(gs, selector);
+#endif
+}
+
+#endif /* CONFIG_PARAVIRT_XXL */
+
+static inline void clflush(volatile void *__p)
+{
+	asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
+}
+
+static inline void clflushopt(volatile void *__p)
+{
+	alternative_io(".byte 0x3e; clflush %P0",
+		       ".byte 0x66; clflush %P0",
+		       X86_FEATURE_CLFLUSHOPT,
+		       "+m" (*(volatile char __force *)__p));
+}
+
+static inline void clwb(volatile void *__p)
+{
+	volatile struct { char x[64]; } *p = __p;
+
+	asm volatile(ALTERNATIVE_2(
+		".byte 0x3e; clflush (%[pax])",
+		".byte 0x66; clflush (%[pax])", /* clflushopt (%%rax) */
+		X86_FEATURE_CLFLUSHOPT,
+		".byte 0x66, 0x0f, 0xae, 0x30",  /* clwb (%%rax) */
+		X86_FEATURE_CLWB)
+		: [p] "+m" (*p)
+		: [pax] "a" (p));
+}
+
+#define nop() asm volatile ("nop")
+
+static inline void serialize(void)
+{
+	/* Instruction opcode for SERIALIZE; supported in binutils >= 2.35. */
+	asm volatile(".byte 0xf, 0x1, 0xe8" ::: "memory");
+}
+
+/* The dst parameter must be 64-bytes aligned */
+static inline void movdir64b(void __iomem *dst, const void *src)
+{
+	const struct { char _[64]; } *__src = src;
+	struct { char _[64]; } __iomem *__dst = dst;
+
+	/*
+	 * MOVDIR64B %(rdx), rax.
+	 *
+	 * Both __src and __dst must be memory constraints in order to tell the
+	 * compiler that no other memory accesses should be reordered around
+	 * this one.
+	 *
+	 * Also, both must be supplied as lvalues because this tells
+	 * the compiler what the object is (its size) the instruction accesses.
+	 * I.e., not the pointers but what they point to, thus the deref'ing '*'.
+	 */
+	asm volatile(".byte 0x66, 0x0f, 0x38, 0xf8, 0x02"
+		     : "+m" (*__dst)
+		     :  "m" (*__src), "a" (__dst), "d" (__src));
+}
+
+/**
+ * enqcmds - Enqueue a command in supervisor (CPL0) mode
+ * @dst: destination, in MMIO space (must be 512-bit aligned)
+ * @src: 512 bits memory operand
+ *
+ * The ENQCMDS instruction allows software to write a 512-bit command to
+ * a 512-bit-aligned special MMIO region that supports the instruction.
+ * A return status is loaded into the ZF flag in the RFLAGS register.
+ * ZF = 0 equates to success, and ZF = 1 indicates retry or error.
+ *
+ * This function issues the ENQCMDS instruction to submit data from
+ * kernel space to MMIO space, in a unit of 512 bits. Order of data access
+ * is not guaranteed, nor is a memory barrier performed afterwards. It
+ * returns 0 on success and -EAGAIN on failure.
+ *
+ * Warning: Do not use this helper unless your driver has checked that the
+ * ENQCMDS instruction is supported on the platform and the device accepts
+ * ENQCMDS.
+ */
+static inline int enqcmds(void __iomem *dst, const void *src)
+{
+	const struct { char _[64]; } *__src = src;
+	struct { char _[64]; } __iomem *__dst = dst;
+	bool zf;
+
+	/*
+	 * ENQCMDS %(rdx), rax
+	 *
+	 * See movdir64b()'s comment on operand specification.
+	 */
+	asm volatile(".byte 0xf3, 0x0f, 0x38, 0xf8, 0x02, 0x66, 0x90"
+		     CC_SET(z)
+		     : CC_OUT(z) (zf), "+m" (*__dst)
+		     : "m" (*__src), "a" (__dst), "d" (__src));
+
+	/* Submission failure is indicated via EFLAGS.ZF=1 */
+	if (zf)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static __always_inline void tile_release(void)
+{
+	/*
+	 * Instruction opcode for TILERELEASE; supported in binutils
+	 * version >= 2.36.
+	 */
+	asm volatile(".byte 0xc4, 0xe2, 0x78, 0x49, 0xc0");
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_SPECIAL_INSNS_H */