diff options
Diffstat (limited to 'drivers/acpi/acpica/exfield.c')
| -rw-r--r-- | drivers/acpi/acpica/exfield.c | 400 |
1 files changed, 400 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c new file mode 100644 index 000000000..2b89a496d --- /dev/null +++ b/drivers/acpi/acpica/exfield.c @@ -0,0 +1,400 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: exfield - AML execution - field_unit read/write + * + * Copyright (C) 2000 - 2022, Intel Corp. + * + *****************************************************************************/ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acdispat.h" +#include "acinterp.h" +#include "amlcode.h" + +#define _COMPONENT ACPI_EXECUTER +ACPI_MODULE_NAME("exfield") + +/* + * This table maps the various Attrib protocols to the byte transfer + * length. Used for the generic serial bus. + */ +#define ACPI_INVALID_PROTOCOL_ID 0x80 +#define ACPI_MAX_PROTOCOL_ID 0x0F +static const u8 acpi_protocol_lengths[] = { + ACPI_INVALID_PROTOCOL_ID, /* 0 - reserved */ + ACPI_INVALID_PROTOCOL_ID, /* 1 - reserved */ + 0x00, /* 2 - ATTRIB_QUICK */ + ACPI_INVALID_PROTOCOL_ID, /* 3 - reserved */ + 0x01, /* 4 - ATTRIB_SEND_RECEIVE */ + ACPI_INVALID_PROTOCOL_ID, /* 5 - reserved */ + 0x01, /* 6 - ATTRIB_BYTE */ + ACPI_INVALID_PROTOCOL_ID, /* 7 - reserved */ + 0x02, /* 8 - ATTRIB_WORD */ + ACPI_INVALID_PROTOCOL_ID, /* 9 - reserved */ + 0xFF, /* A - ATTRIB_BLOCK */ + 0xFF, /* B - ATTRIB_BYTES */ + 0x02, /* C - ATTRIB_PROCESS_CALL */ + 0xFF, /* D - ATTRIB_BLOCK_PROCESS_CALL */ + 0xFF, /* E - ATTRIB_RAW_BYTES */ + 0xFF /* F - ATTRIB_RAW_PROCESS_BYTES */ +}; + +#define PCC_MASTER_SUBSPACE 3 + +/* + * The following macros determine a given offset is a COMD field. + * According to the specification, generic subspaces (types 0-2) contains a + * 2-byte COMD field at offset 4 and master subspaces (type 3) contains a 4-byte + * COMD field starting at offset 12. + */ +#define GENERIC_SUBSPACE_COMMAND(a) (4 == a || a == 5) +#define MASTER_SUBSPACE_COMMAND(a) (12 <= a && a <= 15) + +/******************************************************************************* + * + * FUNCTION: acpi_ex_get_protocol_buffer_length + * + * PARAMETERS: protocol_id - The type of the protocol indicated by region + * field access attributes + * return_length - Where the protocol byte transfer length is + * returned + * + * RETURN: Status and decoded byte transfer length + * + * DESCRIPTION: This routine returns the length of the generic_serial_bus + * protocol bytes + * + ******************************************************************************/ + +acpi_status +acpi_ex_get_protocol_buffer_length(u32 protocol_id, u32 *return_length) +{ + + if ((protocol_id > ACPI_MAX_PROTOCOL_ID) || + (acpi_protocol_lengths[protocol_id] == ACPI_INVALID_PROTOCOL_ID)) { + ACPI_ERROR((AE_INFO, + "Invalid Field/AccessAs protocol ID: 0x%4.4X", + protocol_id)); + + return (AE_AML_PROTOCOL); + } + + *return_length = acpi_protocol_lengths[protocol_id]; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_read_data_from_field + * + * PARAMETERS: walk_state - Current execution state + * obj_desc - The named field + * ret_buffer_desc - Where the return data object is stored + * + * RETURN: Status + * + * DESCRIPTION: Read from a named field. Returns either an Integer or a + * Buffer, depending on the size of the field and whether if a + * field is created by the create_field() operator. + * + ******************************************************************************/ + +acpi_status +acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, + union acpi_operand_object *obj_desc, + union acpi_operand_object **ret_buffer_desc) +{ + acpi_status status; + union acpi_operand_object *buffer_desc; + void *buffer; + u32 buffer_length; + + ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); + + /* Parameter validation */ + + if (!obj_desc) { + return_ACPI_STATUS(AE_AML_NO_OPERAND); + } + if (!ret_buffer_desc) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { + /* + * If the buffer_field arguments have not been previously evaluated, + * evaluate them now and save the results. + */ + if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { + status = acpi_ds_get_buffer_field_arguments(obj_desc); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_SMBUS + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GSBUS + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_IPMI + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_PLATFORM_RT)) { + + /* SMBus, GSBus, IPMI serial */ + + status = acpi_ex_read_serial_bus(obj_desc, ret_buffer_desc); + return_ACPI_STATUS(status); + } + + /* + * Allocate a buffer for the contents of the field. + * + * If the field is larger than the current integer width, create + * a BUFFER to hold it. Otherwise, use an INTEGER. This allows + * the use of arithmetic operators on the returned value if the + * field size is equal or smaller than an Integer. + * + * However, all buffer fields created by create_field operator needs to + * remain as a buffer to match other AML interpreter implementations. + * + * Note: Field.length is in bits. + */ + buffer_length = + (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length); + + if (buffer_length > acpi_gbl_integer_byte_width || + (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD && + obj_desc->buffer_field.is_create_field)) { + + /* Field is too large for an Integer, create a Buffer instead */ + + buffer_desc = acpi_ut_create_buffer_object(buffer_length); + if (!buffer_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + buffer = buffer_desc->buffer.pointer; + } else { + /* Field will fit within an Integer (normal case) */ + + buffer_desc = acpi_ut_create_integer_object((u64) 0); + if (!buffer_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + buffer_length = acpi_gbl_integer_byte_width; + buffer = &buffer_desc->integer.value; + } + + if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GPIO)) { + + /* General Purpose I/O */ + + status = acpi_ex_read_gpio(obj_desc, buffer); + goto exit; + } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_PLATFORM_COMM)) { + /* + * Reading from a PCC field unit does not require the handler because + * it only requires reading from the internal_pcc_buffer. + */ + ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, + "PCC FieldRead bits %u\n", + obj_desc->field.bit_length)); + + memcpy(buffer, + obj_desc->field.region_obj->field.internal_pcc_buffer + + obj_desc->field.base_byte_offset, + (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field. + bit_length)); + + *ret_buffer_desc = buffer_desc; + return AE_OK; + } + + ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, + "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", + obj_desc, obj_desc->common.type, buffer, + buffer_length)); + ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, + "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", + obj_desc->common_field.bit_length, + obj_desc->common_field.start_field_bit_offset, + obj_desc->common_field.base_byte_offset)); + + /* Lock entire transaction if requested */ + + acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); + + /* Read from the field */ + + status = acpi_ex_extract_from_field(obj_desc, buffer, buffer_length); + acpi_ex_release_global_lock(obj_desc->common_field.field_flags); + +exit: + if (ACPI_FAILURE(status)) { + acpi_ut_remove_reference(buffer_desc); + } else { + *ret_buffer_desc = buffer_desc; + } + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_write_data_to_field + * + * PARAMETERS: source_desc - Contains data to write + * obj_desc - The named field + * result_desc - Where the return value is returned, if any + * + * RETURN: Status + * + * DESCRIPTION: Write to a named field + * + ******************************************************************************/ + +acpi_status +acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, + union acpi_operand_object *obj_desc, + union acpi_operand_object **result_desc) +{ + acpi_status status; + u32 buffer_length; + u32 data_length; + void *buffer; + + ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); + + /* Parameter validation */ + + if (!source_desc || !obj_desc) { + return_ACPI_STATUS(AE_AML_NO_OPERAND); + } + + if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { + /* + * If the buffer_field arguments have not been previously evaluated, + * evaluate them now and save the results. + */ + if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { + status = acpi_ds_get_buffer_field_arguments(obj_desc); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GPIO)) { + + /* General Purpose I/O */ + + status = acpi_ex_write_gpio(source_desc, obj_desc, result_desc); + return_ACPI_STATUS(status); + } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_SMBUS + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GSBUS + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_IPMI + || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_PLATFORM_RT)) { + + /* SMBus, GSBus, IPMI serial */ + + status = + acpi_ex_write_serial_bus(source_desc, obj_desc, + result_desc); + return_ACPI_STATUS(status); + } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && + (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_PLATFORM_COMM)) { + /* + * According to the spec a write to the COMD field will invoke the + * region handler. Otherwise, write to the pcc_internal buffer. This + * implementation will use the offsets specified rather than the name + * of the field. This is considered safer because some firmware tools + * are known to obfiscate named objects. + */ + data_length = + (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field. + bit_length); + memcpy(obj_desc->field.region_obj->field.internal_pcc_buffer + + obj_desc->field.base_byte_offset, + source_desc->buffer.pointer, data_length); + + if (MASTER_SUBSPACE_COMMAND(obj_desc->field.base_byte_offset)) { + + /* Perform the write */ + + ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, + "PCC COMD field has been written. Invoking PCC handler now.\n")); + + status = + acpi_ex_access_region(obj_desc, 0, + (u64 *)obj_desc->field. + region_obj->field. + internal_pcc_buffer, + ACPI_WRITE); + return_ACPI_STATUS(status); + } + return (AE_OK); + } + + /* Get a pointer to the data to be written */ + + switch (source_desc->common.type) { + case ACPI_TYPE_INTEGER: + + buffer = &source_desc->integer.value; + buffer_length = sizeof(source_desc->integer.value); + break; + + case ACPI_TYPE_BUFFER: + + buffer = source_desc->buffer.pointer; + buffer_length = source_desc->buffer.length; + break; + + case ACPI_TYPE_STRING: + + buffer = source_desc->string.pointer; + buffer_length = source_desc->string.length; + break; + + default: + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); + } + + ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, + "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", + source_desc, + acpi_ut_get_type_name(source_desc->common.type), + source_desc->common.type, buffer, buffer_length)); + + ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, + "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", + obj_desc, + acpi_ut_get_type_name(obj_desc->common.type), + obj_desc->common.type, + obj_desc->common_field.bit_length, + obj_desc->common_field.start_field_bit_offset, + obj_desc->common_field.base_byte_offset)); + + /* Lock entire transaction if requested */ + + acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); + + /* Write to the field */ + + status = acpi_ex_insert_into_field(obj_desc, buffer, buffer_length); + acpi_ex_release_global_lock(obj_desc->common_field.field_flags); + return_ACPI_STATUS(status); +} |