diff options
Diffstat (limited to 'drivers/ata/Kconfig')
-rw-r--r-- | drivers/ata/Kconfig | 1210 |
1 files changed, 1210 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig new file mode 100644 index 000000000..d9b305a34 --- /dev/null +++ b/drivers/ata/Kconfig @@ -0,0 +1,1210 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# SATA/PATA driver configuration +# + +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + +menuconfig ATA + tristate "Serial ATA and Parallel ATA drivers (libata)" + depends on HAS_IOMEM + depends on BLOCK + select SCSI + select GLOB + help + If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or + any other ATA device under Linux, say Y and make sure that you know + the name of your ATA host adapter (the card inside your computer + that "speaks" the ATA protocol, also called ATA controller), + because you will be asked for it. + + NOTE: ATA enables basic SCSI support; *however*, + 'SCSI disk support', 'SCSI tape support', or + 'SCSI CDROM support' may also be needed, + depending on your hardware configuration. + +if ATA + +config ATA_NONSTANDARD + bool + +config SATA_HOST + bool + +config PATA_TIMINGS + bool + +config ATA_VERBOSE_ERROR + bool "Verbose ATA error reporting" + default y + help + This option adds parsing of ATA command descriptions and error bits + in libata kernel output, making it easier to interpret. + This option will enlarge the kernel by approx. 6KB. Disable it only + if kernel size is more important than ease of debugging. + + If unsure, say Y. + +config ATA_FORCE + bool "\"libata.force=\" kernel parameter support" if EXPERT + default y + help + This option adds support for "libata.force=" kernel parameter for + forcing configuration settings. + + For further information, please read + <file:Documentation/admin-guide/kernel-parameters.txt>. + + This option will enlarge the kernel by approx. 3KB. Disable it if + kernel size is more important than ability to override the default + configuration settings. + + If unsure, say Y. + +config ATA_ACPI + bool "ATA ACPI Support" + depends on ACPI + select PATA_TIMINGS + default y + help + This option adds support for ATA-related ACPI objects. + These ACPI objects add the ability to retrieve taskfiles + from the ACPI BIOS and write them to the disk controller. + These objects may be related to performance, security, + power management, or other areas. + You can disable this at kernel boot time by using the + option libata.noacpi=1 + +config SATA_ZPODD + bool "SATA Zero Power Optical Disc Drive (ZPODD) support" + depends on ATA_ACPI && PM + help + This option adds support for SATA Zero Power Optical Disc + Drive (ZPODD). It requires both the ODD and the platform + support, and if enabled, will automatically power on/off the + ODD when certain condition is satisfied. This does not impact + end user's experience of the ODD, only power is saved when + the ODD is not in use (i.e. no disc inside). + + If unsure, say N. + +config SATA_PMP + bool "SATA Port Multiplier support" + depends on SATA_HOST + default y + help + This option adds support for SATA Port Multipliers + (the SATA version of an ethernet hub, or SAS expander). + +if HAS_DMA + +comment "Controllers with non-SFF native interface" + +config SATA_AHCI + tristate "AHCI SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for AHCI Serial ATA. + + If unsure, say N. + +config SATA_MOBILE_LPM_POLICY + int "Default SATA Link Power Management policy for low power chipsets" + range 0 4 + default 0 + depends on SATA_AHCI + help + Select the Default SATA Link Power Management (LPM) policy to use + for chipsets / "South Bridges" supporting low-power modes. Such + chipsets are typically found on most laptops but desktops and + servers now also widely use chipsets supporting low power modes. + + The value set has the following meanings: + 0 => Keep firmware settings + 1 => Maximum performance + 2 => Medium power + 3 => Medium power with Device Initiated PM enabled + 4 => Minimum power + + Note "Minimum power" is known to cause issues, including disk + corruption, with some disks and should not be used. + +config SATA_AHCI_PLATFORM + tristate "Platform AHCI SATA support" + select SATA_HOST + help + This option enables support for Platform AHCI Serial ATA + controllers. + + If unsure, say N. + +config AHCI_BRCM + tristate "Broadcom AHCI SATA support" + depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \ + ARCH_BCMBCA || COMPILE_TEST + select SATA_HOST + help + This option enables support for the AHCI SATA3 controller found on + Broadcom SoC's. + + If unsure, say N. + +config AHCI_DA850 + tristate "DaVinci DA850 AHCI SATA support" + depends on ARCH_DAVINCI_DA850 || COMPILE_TEST + select SATA_HOST + help + This option enables support for the DaVinci DA850 SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_DM816 + tristate "DaVinci DM816 AHCI SATA support" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select SATA_HOST + help + This option enables support for the DaVinci DM816 SoC's + onboard AHCI SATA controller. + + If unsure, say N. + +config AHCI_DWC + tristate "Synopsys DWC AHCI SATA support" + select SATA_HOST + select MFD_SYSCON if (MIPS_BAIKAL_T1 || COMPILE_TEST) + help + This option enables support for the Synopsys DWC AHCI SATA + controller implementation. + + If unsure, say N. + +config AHCI_ST + tristate "ST AHCI SATA support" + depends on ARCH_STI || COMPILE_TEST + select SATA_HOST + help + This option enables support for ST AHCI SATA controller. + + If unsure, say N. + +config AHCI_IMX + tristate "Freescale i.MX AHCI SATA support" + depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) + depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON + select SATA_HOST + help + This option enables support for the Freescale i.MX SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_CEVA + tristate "CEVA AHCI SATA support" + depends on OF + select SATA_HOST + help + This option enables support for the CEVA AHCI SATA. + It can be found on the Xilinx Zynq UltraScale+ MPSoC. + + If unsure, say N. + +config AHCI_MTK + tristate "MediaTek AHCI SATA support" + depends on ARCH_MEDIATEK || COMPILE_TEST + select MFD_SYSCON + select SATA_HOST + help + This option enables support for the MediaTek SoC's + onboard AHCI SATA controller. + + If unsure, say N. + +config AHCI_MVEBU + tristate "Marvell EBU AHCI SATA support" + depends on ARCH_MVEBU || COMPILE_TEST + select SATA_HOST + help + This option enables support for the Marvebu EBU SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_OCTEON + tristate "Cavium Octeon Soc Serial ATA" + depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC + default y + help + This option enables support for Cavium Octeon SoC Serial ATA. + + If unsure, say N. + +config AHCI_SUNXI + tristate "Allwinner sunxi AHCI SATA support" + depends on ARCH_SUNXI || COMPILE_TEST + select SATA_HOST + help + This option enables support for the Allwinner sunxi SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_TEGRA + tristate "NVIDIA Tegra AHCI SATA support" + depends on ARCH_TEGRA || COMPILE_TEST + select SATA_HOST + help + This option enables support for the NVIDIA Tegra SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_XGENE + tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" + depends on PHY_XGENE || COMPILE_TEST + select SATA_HOST + help + This option enables support for APM X-Gene SoC SATA host controller. + +config AHCI_QORIQ + tristate "Freescale QorIQ AHCI SATA support" + depends on OF + select SATA_HOST + help + This option enables support for the Freescale QorIQ AHCI SoC's + onboard AHCI SATA. + + If unsure, say N. + +config SATA_FSL + tristate "Freescale 3.0Gbps SATA support" + depends on FSL_SOC || COMPILE_TEST + select SATA_HOST + help + This option enables support for Freescale 3.0Gbps SATA controller. + It can be found on MPC837x and MPC8315. + + If unsure, say N. + +config SATA_GEMINI + tristate "Gemini SATA bridge support" + depends on ARCH_GEMINI || (OF && COMPILE_TEST) + select SATA_HOST + default ARCH_GEMINI + help + This enabled support for the FTIDE010 to SATA bridge + found in Cortina Systems Gemini platform. + + If unsure, say N. + +config SATA_AHCI_SEATTLE + tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" + depends on ARCH_SEATTLE || COMPILE_TEST + select SATA_HOST + help + This option enables support for AMD Seattle SATA host controller. + + If unsure, say N + +config SATA_INIC162X + tristate "Initio 162x SATA support (Very Experimental)" + depends on PCI + select SATA_HOST + help + This option enables support for Initio 162x Serial ATA. + +config SATA_ACARD_AHCI + tristate "ACard AHCI variant (ATP 8620)" + depends on PCI + select SATA_HOST + help + This option enables support for Acard. + + If unsure, say N. + +config SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + +endif # HAS_DMA + +config ATA_SFF + bool "ATA SFF support (for legacy IDE and PATA)" + default y + help + This option adds support for ATA controllers with SFF + compliant or similar programming interface. + + SFF is the legacy IDE interface that has been around since + the dawn of time. Almost all PATA controllers have an + SFF interface. Many SATA controllers have an SFF interface + when configured into a legacy compatibility mode. + + For users with exclusively modern controllers like AHCI, + Silicon Image 3124, or Marvell 6440, you may choose to + disable this unneeded SFF support. + + If unsure, say Y. + +if ATA_SFF + +comment "SFF controllers with custom DMA interface" + +config PDC_ADMA + tristate "Pacific Digital ADMA support" + depends on PCI + help + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config PATA_OCTEON_CF + tristate "OCTEON Boot Bus Compact Flash support" + depends on CAVIUM_OCTEON_SOC + select PATA_TIMINGS + help + This option enables a polled compact flash driver for use with + compact flash cards attached to the OCTEON boot bus. + + If unsure, say N. + +config SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on PCI + select SATA_HOST + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SATA_SX4 + tristate "Promise SATA SX4 support (Experimental)" + depends on PCI + select SATA_HOST + help + This option enables support for Promise Serial ATA SX4. + + If unsure, say N. + +config ATA_BMDMA + bool "ATA BMDMA support" + depends on HAS_DMA + default y + help + This option adds support for SFF ATA controllers with BMDMA + capability. BMDMA stands for bus-master DMA and is the + de facto DMA interface for SFF controllers. + + If unsure, say Y. + +if ATA_BMDMA + +comment "SATA SFF controllers with BMDMA" + +config ATA_PIIX + tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for ICH5/6/7/8 Serial ATA + and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series + host controllers. + + If unsure, say N. + +config SATA_DWC + tristate "DesignWare Cores SATA support" + depends on DMADEVICES + select GENERIC_PHY + select SATA_HOST + help + This option enables support for the on-chip SATA controller of the + AppliedMicro processor 460EX. + + If unsure, say N. + +config SATA_DWC_OLD_DMA + bool "Support old device trees" + depends on SATA_DWC + select DW_DMAC_CORE + default y if 460EX + help + This option enables support for old device trees without the + "dmas" property. + +config SATA_HIGHBANK + tristate "Calxeda Highbank SATA support" + depends on ARCH_HIGHBANK || COMPILE_TEST + select SATA_HOST + help + This option enables support for the Calxeda Highbank SoC's + onboard SATA. + + If unsure, say N. + +config SATA_MV + tristate "Marvell SATA support" + depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ + ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST + select GENERIC_PHY + select SATA_HOST + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] PCI(-X) chips, + as well as the newer [67]042 PCI-X/PCIe and SOC devices. + + If unsure, say N. + +config SATA_NV + tristate "NVIDIA SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for NVIDIA Serial ATA. + + If unsure, say N. + +config SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on PCI + select SATA_HOST + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + +config SATA_RCAR + tristate "Renesas R-Car SATA support" + depends on ARCH_RENESAS || COMPILE_TEST + select SATA_HOST + help + This option enables support for Renesas R-Car Serial ATA. + + If unsure, say N. + +config SATA_SIL + tristate "Silicon Image SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for Silicon Image Serial ATA. + + If unsure, say N. + +config SATA_SIS + tristate "SiS 964/965/966/180 SATA support" + depends on PCI + select PATA_SIS + select SATA_HOST + help + This option enables support for SiS Serial ATA on + SiS 964/965/966/180 and Parallel ATA on SiS 180. + The PATA support for SiS 180 requires additionally to + enable the PATA_SIS driver in the config. + If unsure, say N. + +config SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + +config SATA_ULI + tristate "ULi Electronics SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for ULi Electronics SATA. + + If unsure, say N. + +config SATA_VIA + tristate "VIA SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for VIA Serial ATA. + + If unsure, say N. + +config SATA_VITESSE + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" + depends on PCI + select SATA_HOST + help + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. + + If unsure, say N. + +comment "PATA SFF controllers with BMDMA" + +config PATA_ALI + tristate "ALi PATA support" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the ALi ATA interfaces + found on the many ALi chipsets. + + If unsure, say N. + +config PATA_AMD + tristate "AMD/NVidia PATA support" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the AMD and NVidia PATA + interfaces found on the chipsets for Athlon/Athlon64. + + If unsure, say N. + +config PATA_ARASAN_CF + tristate "ARASAN CompactFlash PATA Controller Support" + depends on ARCH_SPEAR13XX || COMPILE_TEST + depends on DMADEVICES + select DMA_ENGINE + help + Say Y here to support the ARASAN CompactFlash PATA controller + +config PATA_ARTOP + tristate "ARTOP 6210/6260 PATA support" + depends on PCI + help + This option enables support for ARTOP PATA controllers. + + If unsure, say N. + +config PATA_ATIIXP + tristate "ATI PATA support" + depends on PCI + help + This option enables support for the ATI ATA interfaces + found on the many ATI chipsets. + + If unsure, say N. + +config PATA_ATP867X + tristate "ARTOP/Acard ATP867X PATA support" + depends on PCI + select PATA_TIMINGS + help + This option enables support for ARTOP/Acard ATP867X PATA + controllers. + + If unsure, say N. + +config PATA_BK3710 + tristate "Palmchip BK3710 PATA support" + depends on ARCH_DAVINCI || COMPILE_TEST + select PATA_TIMINGS + help + This option enables support for the integrated IDE controller on + the TI DaVinci SoC. + + If unsure, say N. + +config PATA_CMD64X + tristate "CMD64x PATA support" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the CMD64x series chips + except for the CMD640. + + If unsure, say N. + +config PATA_CS5520 + tristate "CS5510/5520 PATA support" + depends on PCI && (X86_32 || COMPILE_TEST) + help + This option enables support for the Cyrix 5510/5520 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5530 + tristate "CS5530 PATA support" + depends on PCI && (X86_32 || COMPILE_TEST) + help + This option enables support for the Cyrix/NatSemi/AMD CS5530 + companion chip used with the MediaGX/Geode processor family. + + If unsure, say N. + +config PATA_CS5535 + tristate "CS5535 PATA support (Experimental)" + depends on PCI && (X86_32 || (X86_64 && COMPILE_TEST)) + depends on !UML + help + This option enables support for the NatSemi/AMD CS5535 + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_CS5536 + tristate "CS5536 PATA support" + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) + help + This option enables support for the AMD CS5536 + companion chip used with the Geode LX processor family. + + If unsure, say N. + +config PATA_CYPRESS + tristate "Cypress CY82C693 PATA support (Very Experimental)" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the Cypress/Contaq CY82C693 + chipset found in some Alpha systems + + If unsure, say N. + +config PATA_EFAR + tristate "EFAR SLC90E66 support" + depends on PCI + help + This option enables support for the EFAR SLC90E66 + IDE controller found on some older machines. + + If unsure, say N. + +config PATA_EP93XX + tristate "Cirrus Logic EP93xx PATA support" + depends on ARCH_EP93XX + select PATA_TIMINGS + help + This option enables support for the PATA controller in + the Cirrus Logic EP9312 and EP9315 ARM CPU. + + If unsure, say N. + +config PATA_FTIDE010 + tristate "Faraday Technology FTIDE010 PATA support" + depends on OF + depends on ARM || COMPILE_TEST + depends on SATA_GEMINI + help + This option enables support for the Faraday FTIDE010 + PATA controller found in the Cortina Gemini SoCs. + + If unsure, say N. + +config PATA_HPT366 + tristate "HPT 366/368 PATA support" + depends on PCI + help + This option enables support for the HPT 366 and 368 + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT37X + tristate "HPT 370/370A/371/372/374/302 PATA support" + depends on PCI + help + This option enables support for the majority of the later HPT + PATA controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT3X2N + tristate "HPT 371N/372N/302N PATA support" + depends on PCI + help + This option enables support for the N variant HPT PATA + controllers via the new ATA layer. + + If unsure, say N. + +config PATA_HPT3X3 + tristate "HPT 343/363 PATA support" + depends on PCI + help + This option enables support for the HPT 343/363 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_HPT3X3_DMA + bool "HPT 343/363 DMA support" + depends on PATA_HPT3X3 + help + This option enables DMA support for the HPT343/363 + controllers. Enable with care as there are still some + problems with DMA on this chipset. + +config PATA_ICSIDE + tristate "Acorn ICS PATA support" + depends on ARM && ARCH_ACORN + select PATA_TIMINGS + help + On Acorn systems, say Y here if you wish to use the ICS PATA + interface card. This is not required for ICS partition support. + If you are unsure, say N to this. + +config PATA_IMX + tristate "PATA support for Freescale iMX" + depends on ARCH_MXC || COMPILE_TEST + select PATA_TIMINGS + help + This option enables support for the PATA host available on Freescale + iMX SoCs. + + If unsure, say N. + +config PATA_IT8213 + tristate "IT8213 PATA support (Experimental)" + depends on PCI + help + This option enables support for the ITE 821 PATA + controllers via the new ATA layer. + + If unsure, say N. + +config PATA_IT821X + tristate "IT8211/2 PATA support" + depends on PCI + help + This option enables support for the ITE 8211 and 8212 + PATA controllers via the new ATA layer, including RAID + mode. + + If unsure, say N. + +config PATA_JMICRON + tristate "JMicron PATA support" + depends on PCI + help + Enable support for the JMicron IDE controller, via the new + ATA layer. + + If unsure, say N. + +config PATA_MACIO + tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" + depends on PPC_PMAC + help + Most IDE capable PowerMacs have IDE busses driven by a variant + of this controller which is part of the Apple chipset used on + most PowerMac models. Some models have multiple busses using + different chipsets, though generally, MacIO is one of them. + +config PATA_MARVELL + tristate "Marvell PATA support via legacy mode" + depends on PCI + help + This option enables limited support for the Marvell 88SE61xx ATA + controllers. If you wish to use only the SATA ports then select + the AHCI driver alone. If you wish to the use the PATA port or + both SATA and PATA include this driver. + + If unsure, say N. + +config PATA_MPC52xx + tristate "Freescale MPC52xx SoC internal IDE" + depends on PPC_MPC52xx && PPC_BESTCOMM + select PPC_BESTCOMM_ATA + help + This option enables support for integrated IDE controller + of the Freescale MPC52xx SoC. + + If unsure, say N. + +config PATA_NETCELL + tristate "NETCELL Revolution RAID support" + depends on PCI + help + This option enables support for the Netcell Revolution RAID + PATA controller. + + If unsure, say N. + +config PATA_NINJA32 + tristate "Ninja32/Delkin Cardbus ATA support" + depends on PCI + help + This option enables support for the Ninja32, Delkin and + possibly other brands of Cardbus ATA adapter + + If unsure, say N. + +config PATA_NS87415 + tristate "Nat Semi NS87415 PATA support" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the National Semiconductor + NS87415 PCI-IDE controller. + + If unsure, say N. + +config PATA_OLDPIIX + tristate "Intel PATA old PIIX support" + depends on PCI + help + This option enables support for early PIIX PATA support. + + If unsure, say N. + +config PATA_OPTIDMA + tristate "OPTI FireStar PATA support (Very Experimental)" + depends on PCI + help + This option enables DMA/PIO support for the later OPTi + controllers found on some old motherboards and in some + laptops. + + If unsure, say N. + +config PATA_PDC2027X + tristate "Promise PATA 2027x support" + depends on PCI + help + This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. + + If unsure, say N. + +config PATA_PDC_OLD + tristate "Older Promise PATA controller support" + depends on PCI + help + This option enables support for the Promise 20246, 20262, 20263, + 20265 and 20267 adapters. + + If unsure, say N. + +config PATA_RADISYS + tristate "RADISYS 82600 PATA support (Experimental)" + depends on PCI + help + This option enables support for the RADISYS 82600 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_RDC + tristate "RDC PATA support" + depends on PCI + help + This option enables basic support for the later RDC PATA controllers + controllers via the new ATA layer. For the RDC 1010, you need to + enable the IT821X driver instead. + + If unsure, say N. + +config PATA_SC1200 + tristate "SC1200 PATA support" + depends on PCI && (X86_32 || COMPILE_TEST) + help + This option enables support for the NatSemi/AMD SC1200 SoC + companion chip used with the Geode processor family. + + If unsure, say N. + +config PATA_SCH + tristate "Intel SCH PATA support" + depends on PCI + help + This option enables support for Intel SCH PATA on the Intel + SCH (US15W, US15L, UL11L) series host controllers. + + If unsure, say N. + +config PATA_SERVERWORKS + tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" + depends on PCI + help + This option enables support for the Serverworks OSB4/CSB5/CSB6 and + HT1000 PATA controllers, via the new ATA layer. + + If unsure, say N. + +config PATA_SIL680 + tristate "CMD / Silicon Image 680 PATA support" + depends on PCI + help + This option enables support for CMD / Silicon Image 680 PATA. + + If unsure, say N. + +config PATA_SIS + tristate "SiS PATA support" + depends on PCI + help + This option enables support for SiS PATA controllers + + If unsure, say N. + +config PATA_TOSHIBA + tristate "Toshiba Piccolo support (Experimental)" + depends on PCI + help + Support for the Toshiba Piccolo controllers. Currently only the + primary channel is supported by this driver. + + If unsure, say N. + +config PATA_TRIFLEX + tristate "Compaq Triflex PATA support" + depends on PCI + help + Enable support for the Compaq 'Triflex' IDE controller as found + on many Compaq Pentium-Pro systems, via the new ATA layer. + + If unsure, say N. + +config PATA_VIA + tristate "VIA PATA support" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the VIA PATA interfaces + found on the many VIA chipsets. + + If unsure, say N. + +config PATA_PXA + tristate "PXA DMA-capable PATA support" + depends on ARCH_PXA || COMPILE_TEST + help + This option enables support for harddrive attached to PXA CPU's bus. + + NOTE: This driver utilizes PXA DMA controller, in case your hardware + is not capable of doing MWDMA, use pata_platform instead. + + If unsure, say N. + +config PATA_WINBOND + tristate "Winbond SL82C105 PATA support" + depends on PCI + help + This option enables support for SL82C105 PATA devices found in the + Netwinder and some other systems + + If unsure, say N. + +endif # ATA_BMDMA + +comment "PIO-only SFF controllers" + +config PATA_CMD640_PCI + tristate "CMD640 PCI PATA support (Experimental)" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the CMD640 PCI IDE + interface chip. Only the primary channel is currently + supported. + + If unsure, say N. + +config PATA_FALCON + tristate "Atari Falcon and Q40/Q60 PATA support" + depends on M68K && (ATARI || Q40) + help + This option enables support for the on-board IDE + interface on the Atari Falcon and Q40/Q60. + + If unsure, say N. + +config PATA_GAYLE + tristate "Amiga Gayle PATA support" + depends on M68K && AMIGA + help + This option enables support for the on-board IDE + interfaces on some Amiga models (A600, A1200, + A4000 and A4000T) and also for IDE interfaces on + the Zorro expansion bus (M-Tech E-Matrix 530 + expansion card). + + If unsure, say N. + +config PATA_BUDDHA + tristate "Buddha/Catweasel/X-Surf PATA support" + depends on ZORRO + help + This option enables support for the IDE interfaces + on the Buddha, Catweasel and X-Surf expansion boards + on the Zorro expansion bus. It supports up to two + interfaces on the Buddha, three on the Catweasel and + two on the X-Surf. + + If unsure, say N. + +config PATA_ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP + help + This option enables support for ISA plug & play ATA + controllers such as those found on old soundcards. + + If unsure, say N. + +config PATA_IXP4XX_CF + tristate "IXP4XX Compact Flash support" + depends on ARCH_IXP4XX || COMPILE_TEST + help + This option enables support for a Compact Flash connected on + the ixp4xx expansion bus. This driver had been written for + Loft/Avila boards in mind but can work with others. + + If unsure, say N. + +config PATA_MPIIX + tristate "Intel PATA MPIIX support" + depends on PCI + help + This option enables support for MPIIX PATA support. + + If unsure, say N. + +config PATA_NS87410 + tristate "Nat Semi NS87410 PATA support" + depends on PCI + select PATA_TIMINGS + help + This option enables support for the National Semiconductor + NS87410 PCI-IDE controller. + + If unsure, say N. + +config PATA_OPTI + tristate "OPTI621/6215 PATA support (Very Experimental)" + depends on PCI + help + This option enables full PIO support for the early Opti ATA + controllers found on some old motherboards. + + If unsure, say N. + +config PATA_PALMLD + tristate "Palm LifeDrive PATA support" + depends on MACH_PALMLD + help + This option enables support for Palm LifeDrive's internal ATA + port via the new ATA layer. + + If unsure, say N. + +config PATA_PCMCIA + tristate "PCMCIA PATA support" + depends on PCMCIA + help + This option enables support for PCMCIA ATA interfaces, including + compact flash card adapters via the new ATA layer. + + If unsure, say N. + +config PATA_PLATFORM + tristate "Generic platform device PATA support" if HAVE_PATA_PLATFORM + help + This option enables support for generic directly connected ATA + devices commonly found on embedded systems. + + If unsure, say N. + +config PATA_OF_PLATFORM + tristate "OpenFirmware platform device PATA support" + depends on OF + select PATA_PLATFORM + help + This option enables support for generic directly connected ATA + devices commonly found on embedded systems with OpenFirmware + bindings. + + If unsure, say N. + +config PATA_QDI + tristate "QDI VLB PATA support" + depends on ISA + select PATA_LEGACY + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. + +config PATA_RB532 + tristate "RouterBoard 532 PATA CompactFlash support" + depends on MIKROTIK_RB532 + help + This option enables support for the RouterBoard 532 + PATA CompactFlash controller. + + If unsure, say N. + +config PATA_RZ1000 + tristate "PC Tech RZ1000 PATA support" + depends on PCI + help + This option enables basic support for the PC Tech RZ1000/1 + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_SAMSUNG_CF + tristate "Samsung SoC PATA support" + depends on SAMSUNG_DEV_IDE || COMPILE_TEST + select PATA_TIMINGS + help + This option enables basic support for Samsung's S3C/S5P board + PATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_WINBOND_VLB + tristate "Winbond W83759A VLB PATA support (Experimental)" + depends on ISA + select PATA_LEGACY + help + Support for the Winbond W83759A controller on Vesa Local Bus + systems. + +comment "Generic fallback / legacy drivers" + +config PATA_ACPI + tristate "ACPI firmware driver for PATA" + depends on ATA_ACPI && ATA_BMDMA && PCI + select PATA_TIMINGS + help + This option enables an ACPI method driver which drives + motherboard PATA controller interfaces through the ACPI + firmware in the BIOS. This driver can sometimes handle + otherwise unsupported hardware. + +config ATA_GENERIC + tristate "Generic ATA support" + depends on PCI && ATA_BMDMA + select SATA_HOST + help + This option enables support for generic BIOS configured + ATA controllers via the new ATA layer + + If unsure, say N. + +config PATA_LEGACY + tristate "Legacy ISA PATA support (Experimental)" + depends on (ISA || PCI) + select PATA_TIMINGS + help + This option enables support for ISA/VLB/PCI bus legacy PATA + ports and allows them to be accessed via the new ATA layer. + + If unsure, say N. + +endif # ATA_SFF +endif # ATA |