summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_cs5535.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_cs5535.c')
-rw-r--r--drivers/ata/pata_cs5535.c203
1 files changed, 203 insertions, 0 deletions
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
new file mode 100644
index 000000000..c2c3238ff
--- /dev/null
+++ b/drivers/ata/pata_cs5535.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata-cs5535.c - CS5535 PATA for new ATA layer
+ * (C) 2005-2006 Red Hat Inc
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
+ * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
+ * and Alexander Kiausch <alex.kiausch@t-online.de>
+ *
+ * Loosely based on the piix & svwks drivers.
+ *
+ * Documentation:
+ * Available from AMD web site.
+ * TODO
+ * Review errata to see if serializing is necessary
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <asm/msr.h>
+
+#define DRV_NAME "pata_cs5535"
+#define DRV_VERSION "0.2.12"
+
+/*
+ * The Geode (Aka Athlon GX now) uses an internal MSR based
+ * bus system for control. Demented but there you go.
+ */
+
+#define MSR_ATAC_BASE 0x51300000
+#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
+#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
+#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
+#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
+#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
+#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
+#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
+#define ATAC_RESET (MSR_ATAC_BASE+0x10)
+#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
+#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
+#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
+#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
+#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
+
+#define ATAC_BM0_CMD_PRIM 0x00
+#define ATAC_BM0_STS_PRIM 0x02
+#define ATAC_BM0_PRD 0x04
+
+#define CS5535_CABLE_DETECT 0x48
+
+/**
+ * cs5535_cable_detect - detect cable type
+ * @ap: Port to detect on
+ *
+ * Perform cable detection for ATA66 capable cable. Return a libata
+ * cable type.
+ */
+
+static int cs5535_cable_detect(struct ata_port *ap)
+{
+ u8 cable;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
+ if (cable & 1)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
+/**
+ * cs5535_set_piomode - PIO setup
+ * @ap: ATA interface
+ * @adev: device on the interface
+ *
+ * Set our PIO requirements. The CS5535 is pretty clean about all this
+ */
+
+static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u16 pio_timings[5] = {
+ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131
+ };
+ static const u16 pio_cmd_timings[5] = {
+ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
+ };
+ u32 reg, __maybe_unused dummy;
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ int mode = adev->pio_mode - XFER_PIO_0;
+ int cmdmode = mode;
+
+ /* Command timing has to be for the lowest of the pair of devices */
+ if (pair) {
+ int pairmode = pair->pio_mode - XFER_PIO_0;
+ cmdmode = min(mode, pairmode);
+ /* Write the other drive timing register if it changed */
+ if (cmdmode < pairmode)
+ wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
+ pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
+ }
+ /* Write the drive timing register */
+ wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
+ pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
+
+ /* Set the PIO "format 1" bit in the DMA timing register */
+ rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
+ wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
+}
+
+/**
+ * cs5535_set_dmamode - DMA timing setup
+ * @ap: ATA interface
+ * @adev: Device being configured
+ *
+ */
+
+static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u32 udma_timings[5] = {
+ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
+ };
+ static const u32 mwdma_timings[3] = {
+ 0x7F0FFFF3, 0x7F035352, 0x7F024241
+ };
+ u32 reg, __maybe_unused dummy;
+ int mode = adev->dma_mode;
+
+ rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
+ reg &= 0x80000000UL;
+ if (mode >= XFER_UDMA_0)
+ reg |= udma_timings[mode - XFER_UDMA_0];
+ else
+ reg |= mwdma_timings[mode - XFER_MW_DMA_0];
+ wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
+}
+
+static struct scsi_host_template cs5535_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations cs5535_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = cs5535_cable_detect,
+ .set_piomode = cs5535_set_piomode,
+ .set_dmamode = cs5535_set_dmamode,
+};
+
+/**
+ * cs5535_init_one - Initialise a CS5530
+ * @dev: PCI device
+ * @id: Entry in match table
+ *
+ * Install a driver for the newly found CS5530 companion chip. Most of
+ * this is just housekeeping. We have to set the chip up correctly and
+ * turn off various bits of emulation magic.
+ */
+
+static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ .port_ops = &cs5535_port_ops
+ };
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+
+ return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
+}
+
+static const struct pci_device_id cs5535[] = {
+ { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
+
+ { },
+};
+
+static struct pci_driver cs5535_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = cs5535,
+ .probe = cs5535_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+module_pci_driver(cs5535_pci_driver);
+
+MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
+MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5535);
+MODULE_VERSION(DRV_VERSION);