summaryrefslogtreecommitdiffstats
path: root/drivers/block/drbd/drbd_proc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/drbd/drbd_proc.c')
-rw-r--r--drivers/block/drbd/drbd_proc.c323
1 files changed, 323 insertions, 0 deletions
diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c
new file mode 100644
index 000000000..3c0193de2
--- /dev/null
+++ b/drivers/block/drbd/drbd_proc.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ drbd_proc.c
+
+ This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+ Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+ Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+ Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+
+ */
+
+#include <linux/module.h>
+
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/drbd.h>
+#include "drbd_int.h"
+
+struct proc_dir_entry *drbd_proc;
+
+static void seq_printf_with_thousands_grouping(struct seq_file *seq, long v)
+{
+ /* v is in kB/sec. We don't expect TiByte/sec yet. */
+ if (unlikely(v >= 1000000)) {
+ /* cool: > GiByte/s */
+ seq_printf(seq, "%ld,", v / 1000000);
+ v %= 1000000;
+ seq_printf(seq, "%03ld,%03ld", v/1000, v % 1000);
+ } else if (likely(v >= 1000))
+ seq_printf(seq, "%ld,%03ld", v/1000, v % 1000);
+ else
+ seq_printf(seq, "%ld", v);
+}
+
+static void drbd_get_syncer_progress(struct drbd_device *device,
+ union drbd_dev_state state, unsigned long *rs_total,
+ unsigned long *bits_left, unsigned int *per_mil_done)
+{
+ /* this is to break it at compile time when we change that, in case we
+ * want to support more than (1<<32) bits on a 32bit arch. */
+ typecheck(unsigned long, device->rs_total);
+ *rs_total = device->rs_total;
+
+ /* note: both rs_total and rs_left are in bits, i.e. in
+ * units of BM_BLOCK_SIZE.
+ * for the percentage, we don't care. */
+
+ if (state.conn == C_VERIFY_S || state.conn == C_VERIFY_T)
+ *bits_left = device->ov_left;
+ else
+ *bits_left = drbd_bm_total_weight(device) - device->rs_failed;
+ /* >> 10 to prevent overflow,
+ * +1 to prevent division by zero */
+ if (*bits_left > *rs_total) {
+ /* D'oh. Maybe a logic bug somewhere. More likely just a race
+ * between state change and reset of rs_total.
+ */
+ *bits_left = *rs_total;
+ *per_mil_done = *rs_total ? 0 : 1000;
+ } else {
+ /* Make sure the division happens in long context.
+ * We allow up to one petabyte storage right now,
+ * at a granularity of 4k per bit that is 2**38 bits.
+ * After shift right and multiplication by 1000,
+ * this should still fit easily into a 32bit long,
+ * so we don't need a 64bit division on 32bit arch.
+ * Note: currently we don't support such large bitmaps on 32bit
+ * arch anyways, but no harm done to be prepared for it here.
+ */
+ unsigned int shift = *rs_total > UINT_MAX ? 16 : 10;
+ unsigned long left = *bits_left >> shift;
+ unsigned long total = 1UL + (*rs_total >> shift);
+ unsigned long tmp = 1000UL - left * 1000UL/total;
+ *per_mil_done = tmp;
+ }
+}
+
+
+/*lge
+ * progress bars shamelessly adapted from driver/md/md.c
+ * output looks like
+ * [=====>..............] 33.5% (23456/123456)
+ * finish: 2:20:20 speed: 6,345 (6,456) K/sec
+ */
+static void drbd_syncer_progress(struct drbd_device *device, struct seq_file *seq,
+ union drbd_dev_state state)
+{
+ unsigned long db, dt, dbdt, rt, rs_total, rs_left;
+ unsigned int res;
+ int i, x, y;
+ int stalled = 0;
+
+ drbd_get_syncer_progress(device, state, &rs_total, &rs_left, &res);
+
+ x = res/50;
+ y = 20-x;
+ seq_puts(seq, "\t[");
+ for (i = 1; i < x; i++)
+ seq_putc(seq, '=');
+ seq_putc(seq, '>');
+ for (i = 0; i < y; i++)
+ seq_putc(seq, '.');
+ seq_puts(seq, "] ");
+
+ if (state.conn == C_VERIFY_S || state.conn == C_VERIFY_T)
+ seq_puts(seq, "verified:");
+ else
+ seq_puts(seq, "sync'ed:");
+ seq_printf(seq, "%3u.%u%% ", res / 10, res % 10);
+
+ /* if more than a few GB, display in MB */
+ if (rs_total > (4UL << (30 - BM_BLOCK_SHIFT)))
+ seq_printf(seq, "(%lu/%lu)M",
+ (unsigned long) Bit2KB(rs_left >> 10),
+ (unsigned long) Bit2KB(rs_total >> 10));
+ else
+ seq_printf(seq, "(%lu/%lu)K",
+ (unsigned long) Bit2KB(rs_left),
+ (unsigned long) Bit2KB(rs_total));
+
+ seq_puts(seq, "\n\t");
+
+ /* see drivers/md/md.c
+ * We do not want to overflow, so the order of operands and
+ * the * 100 / 100 trick are important. We do a +1 to be
+ * safe against division by zero. We only estimate anyway.
+ *
+ * dt: time from mark until now
+ * db: blocks written from mark until now
+ * rt: remaining time
+ */
+ /* Rolling marks. last_mark+1 may just now be modified. last_mark+2 is
+ * at least (DRBD_SYNC_MARKS-2)*DRBD_SYNC_MARK_STEP old, and has at
+ * least DRBD_SYNC_MARK_STEP time before it will be modified. */
+ /* ------------------------ ~18s average ------------------------ */
+ i = (device->rs_last_mark + 2) % DRBD_SYNC_MARKS;
+ dt = (jiffies - device->rs_mark_time[i]) / HZ;
+ if (dt > 180)
+ stalled = 1;
+
+ if (!dt)
+ dt++;
+ db = device->rs_mark_left[i] - rs_left;
+ rt = (dt * (rs_left / (db/100+1)))/100; /* seconds */
+
+ seq_printf(seq, "finish: %lu:%02lu:%02lu",
+ rt / 3600, (rt % 3600) / 60, rt % 60);
+
+ dbdt = Bit2KB(db/dt);
+ seq_puts(seq, " speed: ");
+ seq_printf_with_thousands_grouping(seq, dbdt);
+ seq_puts(seq, " (");
+ /* ------------------------- ~3s average ------------------------ */
+ if (drbd_proc_details >= 1) {
+ /* this is what drbd_rs_should_slow_down() uses */
+ i = (device->rs_last_mark + DRBD_SYNC_MARKS-1) % DRBD_SYNC_MARKS;
+ dt = (jiffies - device->rs_mark_time[i]) / HZ;
+ if (!dt)
+ dt++;
+ db = device->rs_mark_left[i] - rs_left;
+ dbdt = Bit2KB(db/dt);
+ seq_printf_with_thousands_grouping(seq, dbdt);
+ seq_puts(seq, " -- ");
+ }
+
+ /* --------------------- long term average ---------------------- */
+ /* mean speed since syncer started
+ * we do account for PausedSync periods */
+ dt = (jiffies - device->rs_start - device->rs_paused) / HZ;
+ if (dt == 0)
+ dt = 1;
+ db = rs_total - rs_left;
+ dbdt = Bit2KB(db/dt);
+ seq_printf_with_thousands_grouping(seq, dbdt);
+ seq_putc(seq, ')');
+
+ if (state.conn == C_SYNC_TARGET ||
+ state.conn == C_VERIFY_S) {
+ seq_puts(seq, " want: ");
+ seq_printf_with_thousands_grouping(seq, device->c_sync_rate);
+ }
+ seq_printf(seq, " K/sec%s\n", stalled ? " (stalled)" : "");
+
+ if (drbd_proc_details >= 1) {
+ /* 64 bit:
+ * we convert to sectors in the display below. */
+ unsigned long bm_bits = drbd_bm_bits(device);
+ unsigned long bit_pos;
+ unsigned long long stop_sector = 0;
+ if (state.conn == C_VERIFY_S ||
+ state.conn == C_VERIFY_T) {
+ bit_pos = bm_bits - device->ov_left;
+ if (verify_can_do_stop_sector(device))
+ stop_sector = device->ov_stop_sector;
+ } else
+ bit_pos = device->bm_resync_fo;
+ /* Total sectors may be slightly off for oddly
+ * sized devices. So what. */
+ seq_printf(seq,
+ "\t%3d%% sector pos: %llu/%llu",
+ (int)(bit_pos / (bm_bits/100+1)),
+ (unsigned long long)bit_pos * BM_SECT_PER_BIT,
+ (unsigned long long)bm_bits * BM_SECT_PER_BIT);
+ if (stop_sector != 0 && stop_sector != ULLONG_MAX)
+ seq_printf(seq, " stop sector: %llu", stop_sector);
+ seq_putc(seq, '\n');
+ }
+}
+
+int drbd_seq_show(struct seq_file *seq, void *v)
+{
+ int i, prev_i = -1;
+ const char *sn;
+ struct drbd_device *device;
+ struct net_conf *nc;
+ union drbd_dev_state state;
+ char wp;
+
+ static char write_ordering_chars[] = {
+ [WO_NONE] = 'n',
+ [WO_DRAIN_IO] = 'd',
+ [WO_BDEV_FLUSH] = 'f',
+ };
+
+ seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",
+ API_VERSION, PRO_VERSION_MIN, PRO_VERSION_MAX, drbd_buildtag());
+
+ /*
+ cs .. connection state
+ ro .. node role (local/remote)
+ ds .. disk state (local/remote)
+ protocol
+ various flags
+ ns .. network send
+ nr .. network receive
+ dw .. disk write
+ dr .. disk read
+ al .. activity log write count
+ bm .. bitmap update write count
+ pe .. pending (waiting for ack or data reply)
+ ua .. unack'd (still need to send ack or data reply)
+ ap .. application requests accepted, but not yet completed
+ ep .. number of epochs currently "on the fly", P_BARRIER_ACK pending
+ wo .. write ordering mode currently in use
+ oos .. known out-of-sync kB
+ */
+
+ rcu_read_lock();
+ idr_for_each_entry(&drbd_devices, device, i) {
+ if (prev_i != i - 1)
+ seq_putc(seq, '\n');
+ prev_i = i;
+
+ state = device->state;
+ sn = drbd_conn_str(state.conn);
+
+ if (state.conn == C_STANDALONE &&
+ state.disk == D_DISKLESS &&
+ state.role == R_SECONDARY) {
+ seq_printf(seq, "%2d: cs:Unconfigured\n", i);
+ } else {
+ /* reset device->congestion_reason */
+
+ nc = rcu_dereference(first_peer_device(device)->connection->net_conf);
+ wp = nc ? nc->wire_protocol - DRBD_PROT_A + 'A' : ' ';
+ seq_printf(seq,
+ "%2d: cs:%s ro:%s/%s ds:%s/%s %c %c%c%c%c%c%c\n"
+ " ns:%u nr:%u dw:%u dr:%u al:%u bm:%u "
+ "lo:%d pe:%d ua:%d ap:%d ep:%d wo:%c",
+ i, sn,
+ drbd_role_str(state.role),
+ drbd_role_str(state.peer),
+ drbd_disk_str(state.disk),
+ drbd_disk_str(state.pdsk),
+ wp,
+ drbd_suspended(device) ? 's' : 'r',
+ state.aftr_isp ? 'a' : '-',
+ state.peer_isp ? 'p' : '-',
+ state.user_isp ? 'u' : '-',
+ device->congestion_reason ?: '-',
+ test_bit(AL_SUSPENDED, &device->flags) ? 's' : '-',
+ device->send_cnt/2,
+ device->recv_cnt/2,
+ device->writ_cnt/2,
+ device->read_cnt/2,
+ device->al_writ_cnt,
+ device->bm_writ_cnt,
+ atomic_read(&device->local_cnt),
+ atomic_read(&device->ap_pending_cnt) +
+ atomic_read(&device->rs_pending_cnt),
+ atomic_read(&device->unacked_cnt),
+ atomic_read(&device->ap_bio_cnt),
+ first_peer_device(device)->connection->epochs,
+ write_ordering_chars[device->resource->write_ordering]
+ );
+ seq_printf(seq, " oos:%llu\n",
+ Bit2KB((unsigned long long)
+ drbd_bm_total_weight(device)));
+ }
+ if (state.conn == C_SYNC_SOURCE ||
+ state.conn == C_SYNC_TARGET ||
+ state.conn == C_VERIFY_S ||
+ state.conn == C_VERIFY_T)
+ drbd_syncer_progress(device, seq, state);
+
+ if (drbd_proc_details >= 1 && get_ldev_if_state(device, D_FAILED)) {
+ lc_seq_printf_stats(seq, device->resync);
+ lc_seq_printf_stats(seq, device->act_log);
+ put_ldev(device);
+ }
+
+ if (drbd_proc_details >= 2)
+ seq_printf(seq, "\tblocked on activity log: %d\n", atomic_read(&device->ap_actlog_cnt));
+ }
+ rcu_read_unlock();
+
+ return 0;
+}