summaryrefslogtreecommitdiffstats
path: root/drivers/block/paride
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/paride')
-rw-r--r--drivers/block/paride/Kconfig302
-rw-r--r--drivers/block/paride/Makefile29
-rw-r--r--drivers/block/paride/Transition-notes128
-rw-r--r--drivers/block/paride/aten.c162
-rw-r--r--drivers/block/paride/bpck.c477
-rw-r--r--drivers/block/paride/bpck6.c267
-rw-r--r--drivers/block/paride/comm.c218
-rw-r--r--drivers/block/paride/dstr.c233
-rw-r--r--drivers/block/paride/epat.c340
-rw-r--r--drivers/block/paride/epia.c316
-rw-r--r--drivers/block/paride/fit2.c151
-rw-r--r--drivers/block/paride/fit3.c211
-rw-r--r--drivers/block/paride/friq.c276
-rw-r--r--drivers/block/paride/frpw.c313
-rw-r--r--drivers/block/paride/kbic.c305
-rw-r--r--drivers/block/paride/ktti.c128
-rw-r--r--drivers/block/paride/mkd31
-rw-r--r--drivers/block/paride/on20.c153
-rw-r--r--drivers/block/paride/on26.c319
-rw-r--r--drivers/block/paride/paride.c479
-rw-r--r--drivers/block/paride/paride.h172
-rw-r--r--drivers/block/paride/pcd.c1042
-rw-r--r--drivers/block/paride/pd.c1032
-rw-r--r--drivers/block/paride/pf.c1057
-rw-r--r--drivers/block/paride/pg.c734
-rw-r--r--drivers/block/paride/ppc6lnx.c726
-rw-r--r--drivers/block/paride/pseudo.h102
-rw-r--r--drivers/block/paride/pt.c1024
28 files changed, 10727 insertions, 0 deletions
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
new file mode 100644
index 000000000..a29563459
--- /dev/null
+++ b/drivers/block/paride/Kconfig
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# PARIDE configuration
+#
+# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
+# PARIDE must also be a module.
+# PARIDE only supports PC style parports. Tough for USB or other parports...
+
+comment "Parallel IDE high-level drivers"
+ depends on PARIDE
+
+config PARIDE_PD
+ tristate "Parallel port IDE disks"
+ depends on PARIDE
+ help
+ This option enables the high-level driver for IDE-type disk devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port IDE driver, otherwise you should answer M to build
+ it as a loadable module. The module will be called pd. You
+ must also have at least one parallel port protocol driver in your
+ system. Among the devices supported by this driver are the SyQuest
+ EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
+ hard drives from MicroSolutions.
+
+config PARIDE_PCD
+ tristate "Parallel port ATAPI CD-ROMs"
+ depends on PARIDE
+ select CDROM
+ help
+ This option enables the high-level driver for ATAPI CD-ROM devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port ATAPI CD-ROM driver, otherwise you should answer M to
+ build it as a loadable module. The module will be called pcd. You
+ must also have at least one parallel port protocol driver in your
+ system. Among the devices supported by this driver are the
+ MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
+ you have such a CD-ROM drive, you should also say Y or M to "ISO
+ 9660 CD-ROM file system support" below, because that's the file
+ system used on CD-ROMs.
+
+config PARIDE_PF
+ tristate "Parallel port ATAPI disks"
+ depends on PARIDE
+ help
+ This option enables the high-level driver for ATAPI disk devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port ATAPI disk driver, otherwise you should answer M
+ to build it as a loadable module. The module will be called pf.
+ You must also have at least one parallel port protocol driver in
+ your system. Among the devices supported by this driver are the
+ MicroSolutions backpack PD/CD drive and the Imation Superdisk
+ LS-120 drive.
+
+config PARIDE_PT
+ tristate "Parallel port ATAPI tapes"
+ depends on PARIDE
+ help
+ This option enables the high-level driver for ATAPI tape devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port ATAPI disk driver, otherwise you should answer M
+ to build it as a loadable module. The module will be called pt.
+ You must also have at least one parallel port protocol driver in
+ your system. Among the devices supported by this driver is the
+ parallel port version of the HP 5GB drive.
+
+config PARIDE_PG
+ tristate "Parallel port generic ATAPI devices"
+ depends on PARIDE
+ help
+ This option enables a special high-level driver for generic ATAPI
+ devices connected through a parallel port. The driver allows user
+ programs, such as cdrtools, to send ATAPI commands directly to a
+ device.
+
+ If you chose to build PARIDE support into your kernel, you may
+ answer Y here to build in the parallel port generic ATAPI driver,
+ otherwise you should answer M to build it as a loadable module. The
+ module will be called pg.
+
+ You must also have at least one parallel port protocol driver in
+ your system.
+
+ This driver implements an API loosely related to the generic SCSI
+ driver. See <file:include/linux/pg.h>. for details.
+
+ You can obtain the most recent version of cdrtools from
+ <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
+ later fully support this driver.
+
+comment "Parallel IDE protocol modules"
+ depends on PARIDE
+
+config PARIDE_ATEN
+ tristate "ATEN EH-100 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the ATEN EH-100 parallel port IDE
+ protocol. This protocol is used in some inexpensive low performance
+ parallel port kits made in Hong Kong. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ protocol driver, otherwise you should answer M to build it as a
+ loadable module. The module will be called aten. You must also
+ have a high-level driver for the type of device that you want to
+ support.
+
+config PARIDE_BPCK
+ tristate "MicroSolutions backpack (Series 5) protocol"
+ depends on PARIDE
+ help
+ This option enables support for the Micro Solutions BACKPACK
+ parallel port Series 5 IDE protocol. (Most BACKPACK drives made
+ before 1999 were Series 5) Series 5 drives will NOT always have the
+ Series noted on the bottom of the drive. Series 6 drivers will.
+
+ In other words, if your BACKPACK drive doesn't say "Series 6" on the
+ bottom, enable this option.
+
+ If you chose to build PARIDE support into your kernel, you may
+ answer Y here to build in the protocol driver, otherwise you should
+ answer M to build it as a loadable module. The module will be
+ called bpck. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_BPCK6
+ tristate "MicroSolutions backpack (Series 6) protocol"
+ depends on PARIDE && !64BIT
+ help
+ This option enables support for the Micro Solutions BACKPACK
+ parallel port Series 6 IDE protocol. (Most BACKPACK drives made
+ after 1999 were Series 6) Series 6 drives will have the Series noted
+ on the bottom of the drive. Series 5 drivers don't always have it
+ noted.
+
+ In other words, if your BACKPACK drive says "Series 6" on the
+ bottom, enable this option.
+
+ If you chose to build PARIDE support into your kernel, you may
+ answer Y here to build in the protocol driver, otherwise you should
+ answer M to build it as a loadable module. The module will be
+ called bpck6. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_COMM
+ tristate "DataStor Commuter protocol"
+ depends on PARIDE
+ help
+ This option enables support for the Commuter parallel port IDE
+ protocol from DataStor. If you chose to build PARIDE support
+ into your kernel, you may answer Y here to build in the protocol
+ driver, otherwise you should answer M to build it as a loadable
+ module. The module will be called comm. You must also have
+ a high-level driver for the type of device that you want to support.
+
+config PARIDE_DSTR
+ tristate "DataStor EP-2000 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the EP-2000 parallel port IDE
+ protocol from DataStor. If you chose to build PARIDE support
+ into your kernel, you may answer Y here to build in the protocol
+ driver, otherwise you should answer M to build it as a loadable
+ module. The module will be called dstr. You must also have
+ a high-level driver for the type of device that you want to support.
+
+config PARIDE_FIT2
+ tristate "FIT TD-2000 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the TD-2000 parallel port IDE
+ protocol from Fidelity International Technology. This is a simple
+ (low speed) adapter that is used in some portable hard drives. If
+ you chose to build PARIDE support into your kernel, you may answer Y
+ here to build in the protocol driver, otherwise you should answer M
+ to build it as a loadable module. The module will be called ktti.
+ You must also have a high-level driver for the type of device that
+ you want to support.
+
+config PARIDE_FIT3
+ tristate "FIT TD-3000 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the TD-3000 parallel port IDE
+ protocol from Fidelity International Technology. This protocol is
+ used in newer models of their portable disk, CD-ROM and PD/CD
+ devices. If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called fit3. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_EPAT
+ tristate "Shuttle EPAT/EPEZ protocol"
+ depends on PARIDE
+ help
+ This option enables support for the EPAT parallel port IDE protocol.
+ EPAT is a parallel port IDE adapter manufactured by Shuttle
+ Technology and widely used in devices from major vendors such as
+ Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
+ PARIDE support into your kernel, you may answer Y here to build in
+ the protocol driver, otherwise you should answer M to build it as a
+ loadable module. The module will be called epat. You must also
+ have a high-level driver for the type of device that you want to
+ support.
+
+config PARIDE_EPATC8
+ bool "Support c7/c8 chips"
+ depends on PARIDE_EPAT
+ help
+ This option enables support for the newer Shuttle EP1284 (aka c7 and
+ c8) chip. You need this if you are using any recent Imation SuperDisk
+ (LS-120) drive.
+
+config PARIDE_EPIA
+ tristate "Shuttle EPIA protocol"
+ depends on PARIDE
+ help
+ This option enables support for the (obsolete) EPIA parallel port
+ IDE protocol from Shuttle Technology. This adapter can still be
+ found in some no-name kits. If you chose to build PARIDE support
+ into your kernel, you may answer Y here to build in the protocol
+ driver, otherwise you should answer M to build it as a loadable
+ module. The module will be called epia. You must also have a
+ high-level driver for the type of device that you want to support.
+
+config PARIDE_FRIQ
+ tristate "Freecom IQ ASIC-2 protocol"
+ depends on PARIDE
+ help
+ This option enables support for version 2 of the Freecom IQ parallel
+ port IDE adapter. This adapter is used by the Maxell Superdisk
+ drive. If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called friq. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_FRPW
+ tristate "FreeCom power protocol"
+ depends on PARIDE
+ help
+ This option enables support for the Freecom power parallel port IDE
+ protocol. If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called frpw. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_KBIC
+ tristate "KingByte KBIC-951A/971A protocols"
+ depends on PARIDE
+ help
+ This option enables support for the KBIC-951A and KBIC-971A parallel
+ port IDE protocols from KingByte Information Corp. KingByte's
+ adapters appear in many no-name portable disk and CD-ROM products,
+ especially in Europe. If you chose to build PARIDE support into your
+ kernel, you may answer Y here to build in the protocol driver,
+ otherwise you should answer M to build it as a loadable module. The
+ module will be called kbic. You must also have a high-level driver
+ for the type of device that you want to support.
+
+config PARIDE_KTTI
+ tristate "KT PHd protocol"
+ depends on PARIDE
+ help
+ This option enables support for the "PHd" parallel port IDE protocol
+ from KT Technology. This is a simple (low speed) adapter that is
+ used in some 2.5" portable hard drives. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ protocol driver, otherwise you should answer M to build it as a
+ loadable module. The module will be called ktti. You must also
+ have a high-level driver for the type of device that you want to
+ support.
+
+config PARIDE_ON20
+ tristate "OnSpec 90c20 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the (obsolete) 90c20 parallel port
+ IDE protocol from OnSpec (often marketed under the ValuStore brand
+ name). If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will
+ be called on20. You must also have a high-level driver for the
+ type of device that you want to support.
+
+config PARIDE_ON26
+ tristate "OnSpec 90c26 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the 90c26 parallel port IDE protocol
+ from OnSpec Electronics (often marketed under the ValuStore brand
+ name). If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called on26. You must also have a high-level driver for the type
+ of device that you want to support.
+
+#
diff --git a/drivers/block/paride/Makefile b/drivers/block/paride/Makefile
new file mode 100644
index 000000000..cf1742a84
--- /dev/null
+++ b/drivers/block/paride/Makefile
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Parallel port IDE device drivers.
+#
+# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+obj-$(CONFIG_PARIDE) += paride.o
+obj-$(CONFIG_PARIDE_ATEN) += aten.o
+obj-$(CONFIG_PARIDE_BPCK) += bpck.o
+obj-$(CONFIG_PARIDE_COMM) += comm.o
+obj-$(CONFIG_PARIDE_DSTR) += dstr.o
+obj-$(CONFIG_PARIDE_KBIC) += kbic.o
+obj-$(CONFIG_PARIDE_EPAT) += epat.o
+obj-$(CONFIG_PARIDE_EPIA) += epia.o
+obj-$(CONFIG_PARIDE_FRPW) += frpw.o
+obj-$(CONFIG_PARIDE_FRIQ) += friq.o
+obj-$(CONFIG_PARIDE_FIT2) += fit2.o
+obj-$(CONFIG_PARIDE_FIT3) += fit3.o
+obj-$(CONFIG_PARIDE_ON20) += on20.o
+obj-$(CONFIG_PARIDE_ON26) += on26.o
+obj-$(CONFIG_PARIDE_KTTI) += ktti.o
+obj-$(CONFIG_PARIDE_BPCK6) += bpck6.o
+obj-$(CONFIG_PARIDE_PD) += pd.o
+obj-$(CONFIG_PARIDE_PCD) += pcd.o
+obj-$(CONFIG_PARIDE_PF) += pf.o
+obj-$(CONFIG_PARIDE_PT) += pt.o
+obj-$(CONFIG_PARIDE_PG) += pg.o
diff --git a/drivers/block/paride/Transition-notes b/drivers/block/paride/Transition-notes
new file mode 100644
index 000000000..70374907c
--- /dev/null
+++ b/drivers/block/paride/Transition-notes
@@ -0,0 +1,128 @@
+Lemma 1:
+ If ps_tq is scheduled, ps_tq_active is 1. ps_tq_int() can be called
+ only when ps_tq_active is 1.
+Proof: All assignments to ps_tq_active and all scheduling of ps_tq happen
+ under ps_spinlock. There are three places where that can happen:
+ one in ps_set_intr() (A) and two in ps_tq_int() (B and C).
+ Consider the sequnce of these events. A can not be preceded by
+ anything except B, since it is under if (!ps_tq_active) under
+ ps_spinlock. C is always preceded by B, since we can't reach it
+ other than through B and we don't drop ps_spinlock between them.
+ IOW, the sequence is A?(BA|BC|B)*. OTOH, number of B can not exceed
+ the sum of numbers of A and C, since each call of ps_tq_int() is
+ the result of ps_tq execution. Therefore, the sequence starts with
+ A and each B is preceded by either A or C. Moments when we enter
+ ps_tq_int() are sandwiched between {A,C} and B in that sequence,
+ since at any time number of B can not exceed the number of these
+ moments which, in turn, can not exceed the number of A and C.
+ In other words, the sequence of events is (A or C set ps_tq_active to
+ 1 and schedule ps_tq, ps_tq is executed, ps_tq_int() is entered,
+ B resets ps_tq_active)*.
+
+
+consider the following area:
+ * in do_pd_request1(): to calls of pi_do_claimed() and return in
+ case when pd_req is NULL.
+ * in next_request(): to call of do_pd_request1()
+ * in do_pd_read(): to call of ps_set_intr()
+ * in do_pd_read_start(): to calls of pi_do_claimed(), next_request()
+and ps_set_intr()
+ * in do_pd_read_drq(): to calls of pi_do_claimed() and next_request()
+ * in do_pd_write(): to call of ps_set_intr()
+ * in do_pd_write_start(): to calls of pi_do_claimed(), next_request()
+and ps_set_intr()
+ * in do_pd_write_done(): to calls of pi_do_claimed() and next_request()
+ * in ps_set_intr(): to check for ps_tq_active and to scheduling
+ ps_tq if ps_tq_active was 0.
+ * in ps_tq_int(): from the moment when we get ps_spinlock() to the
+ return, call of con() or scheduling ps_tq.
+ * in pi_schedule_claimed() when called from pi_do_claimed() called from
+ pd.c, everything until returning 1 or setting or setting ->claim_cont
+ on the path that returns 0
+ * in pi_do_claimed() when called from pd.c, everything until the call
+ of pi_do_claimed() plus the everything until the call of cont() if
+ pi_do_claimed() has returned 1.
+ * in pi_wake_up() called for PIA that belongs to pd.c, everything from
+ the moment when pi_spinlock has been acquired.
+
+Lemma 2:
+ 1) at any time at most one thread of execution can be in that area or
+ be preempted there.
+ 2) When there is such a thread, pd_busy is set or pd_lock is held by
+ that thread.
+ 3) When there is such a thread, ps_tq_active is 0 or ps_spinlock is
+ held by that thread.
+ 4) When there is such a thread, all PIA belonging to pd.c have NULL
+ ->claim_cont or pi_spinlock is held by thread in question.
+
+Proof: consider the first moment when the above is not true.
+
+(1) can become not true if some thread enters that area while another is there.
+ a) do_pd_request1() can be called from next_request() or do_pd_request()
+ In the first case the thread was already in the area. In the second,
+ the thread was holding pd_lock and found pd_busy not set, which would
+ mean that (2) was already not true.
+ b) ps_set_intr() and pi_schedule_claimed() can be called only from the
+ area.
+ c) pi_do_claimed() is called by pd.c only from the area.
+ d) ps_tq_int() can enter the area only when the thread is holding
+ ps_spinlock and ps_tq_active is 1 (due to Lemma 1). It means that
+ (3) was already not true.
+ e) do_pd_{read,write}* could be called only from the area. The only
+ case that needs consideration is call from pi_wake_up() and there
+ we would have to be called for the PIA that got ->claimed_cont
+ from pd.c. That could happen only if pi_do_claimed() had been
+ called from pd.c for that PIA, which happens only for PIA belonging
+ to pd.c.
+ f) pi_wake_up() can enter the area only when the thread is holding
+ pi_spinlock and ->claimed_cont is non-NULL for PIA belonging to
+ pd.c. It means that (4) was already not true.
+
+(2) can become not true only when pd_lock is released by the thread in question.
+ Indeed, pd_busy is reset only in the area and thread that resets
+ it is holding pd_lock. The only place within the area where we
+ release pd_lock is in pd_next_buf() (called from within the area).
+ But that code does not reset pd_busy, so pd_busy would have to be
+ 0 when pd_next_buf() had acquired pd_lock. If it become 0 while
+ we were acquiring the lock, (1) would be already false, since
+ the thread that had reset it would be in the area simulateously.
+ If it was 0 before we tried to acquire pd_lock, (2) would be
+ already false.
+
+For similar reasons, (3) can become not true only when ps_spinlock is released
+by the thread in question. However, all such places within the area are right
+after resetting ps_tq_active to 0.
+
+(4) is done the same way - all places where we release pi_spinlock within
+the area are either after resetting ->claimed_cont to NULL while holding
+pi_spinlock, or after not tocuhing ->claimed_cont since acquiring pi_spinlock
+also in the area. The only place where ->claimed_cont is made non-NULL is
+in the area, under pi_spinlock and we do not release it until after leaving
+the area.
+
+QED.
+
+
+Corollary 1: ps_tq_active can be killed. Indeed, the only place where we
+check its value is in ps_set_intr() and if it had been non-zero at that
+point, we would have violated either (2.1) (if it was set while ps_set_intr()
+was acquiring ps_spinlock) or (2.3) (if it was set when we started to
+acquire ps_spinlock).
+
+Corollary 2: ps_spinlock can be killed. Indeed, Lemma 1 and Lemma 2 show
+that the only possible contention is between scheduling ps_tq followed by
+immediate release of spinlock and beginning of execution of ps_tq on
+another CPU.
+
+Corollary 3: assignment to pd_busy in do_pd_read_start() and do_pd_write_start()
+can be killed. Indeed, we are not holding pd_lock and thus pd_busy is already
+1 here.
+
+Corollary 4: in ps_tq_int() uses of con can be replaced with uses of
+ps_continuation, since the latter is changed only from the area.
+We don't need to reset it to NULL, since we are guaranteed that there
+will be a call of ps_set_intr() before we look at ps_continuation again.
+We can remove the check for ps_continuation being NULL for the same
+reason - the value is guaranteed to be set by the last ps_set_intr() and
+we never pass it NULL. Assignements in the beginning of ps_set_intr()
+can be taken to callers as long as they remain within the area.
diff --git a/drivers/block/paride/aten.c b/drivers/block/paride/aten.c
new file mode 100644
index 000000000..269546556
--- /dev/null
+++ b/drivers/block/paride/aten.c
@@ -0,0 +1,162 @@
+/*
+ aten.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ aten.c is a low-level protocol driver for the ATEN EH-100
+ parallel port adapter. The EH-100 supports 4-bit and 8-bit
+ modes only. There is also an EH-132 which supports EPP mode
+ transfers. The EH-132 is not yet supported.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.05 init_proto, release_proto
+
+*/
+
+#define ATEN_VERSION "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88)
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x08, 0x20 };
+
+static void aten_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont] + 0x80;
+
+ w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc);
+}
+
+static int aten_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ r = regr + cont_map[cont] + 0x40;
+
+ switch (pi->mode) {
+
+ case 0: w0(r); w2(0xe); w2(6);
+ w2(7); w2(6); w2(0);
+ a = r1(); w0(0x10); b = r1(); w2(0xc);
+ return j44(a,b);
+
+ case 1: r |= 0x10;
+ w0(r); w2(0xe); w2(6); w0(0xff);
+ w2(0x27); w2(0x26); w2(0x20);
+ a = r0();
+ w2(0x26); w2(0xc);
+ return a;
+ }
+ return -1;
+}
+
+static void aten_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b, c, d;
+
+ switch (pi->mode) {
+
+ case 0: w0(0x48); w2(0xe); w2(6);
+ for (k=0;k<count/2;k++) {
+ w2(7); w2(6); w2(2);
+ a = r1(); w0(0x58); b = r1();
+ w2(0); d = r1(); w0(0x48); c = r1();
+ buf[2*k] = j44(c,d);
+ buf[2*k+1] = j44(a,b);
+ }
+ w2(0xc);
+ break;
+
+ case 1: w0(0x58); w2(0xe); w2(6);
+ for (k=0;k<count/2;k++) {
+ w2(0x27); w2(0x26); w2(0x22);
+ a = r0(); w2(0x20); b = r0();
+ buf[2*k] = b; buf[2*k+1] = a;
+ }
+ w2(0x26); w2(0xc);
+ break;
+ }
+}
+
+static void aten_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ w0(0x88); w2(0xe); w2(6);
+ for (k=0;k<count/2;k++) {
+ w0(buf[2*k+1]); w2(0xe); w2(6);
+ w0(buf[2*k]); w2(7); w2(6);
+ }
+ w2(0xc);
+}
+
+static void aten_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(0xc);
+}
+
+static void aten_disconnect ( PIA *pi )
+
+{ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void aten_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[2] = {"4-bit","8-bit"};
+
+ printk("%s: aten %s, ATEN EH-100 at 0x%x, ",
+ pi->device,ATEN_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol aten = {
+ .owner = THIS_MODULE,
+ .name = "aten",
+ .max_mode = 2,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = aten_write_regr,
+ .read_regr = aten_read_regr,
+ .write_block = aten_write_block,
+ .read_block = aten_read_block,
+ .connect = aten_connect,
+ .disconnect = aten_disconnect,
+ .log_adapter = aten_log_adapter,
+};
+
+static int __init aten_init(void)
+{
+ return paride_register(&aten);
+}
+
+static void __exit aten_exit(void)
+{
+ paride_unregister( &aten );
+}
+
+MODULE_LICENSE("GPL");
+module_init(aten_init)
+module_exit(aten_exit)
diff --git a/drivers/block/paride/bpck.c b/drivers/block/paride/bpck.c
new file mode 100644
index 000000000..d880a9465
--- /dev/null
+++ b/drivers/block/paride/bpck.c
@@ -0,0 +1,477 @@
+/*
+ bpck.c (c) 1996-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ bpck.c is a low-level protocol driver for the MicroSolutions
+ "backpack" parallel port IDE adapter.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay
+ 1.02 GRG 1998.08.15 default pi->delay returned to 4
+
+*/
+
+#define BPCK_VERSION "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#undef r2
+#undef w2
+#undef PC
+
+#define PC pi->private
+#define r2() (PC=(in_p(2) & 0xff))
+#define w2(byte) {out_p(2,byte); PC = byte;}
+#define t2(pat) {PC ^= pat; out_p(2,PC);}
+#define e2() {PC &= 0xfe; out_p(2,PC);}
+#define o2() {PC |= 1; out_p(2,PC);}
+
+#define j44(l,h) (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+ cont = 2 - use internal bpck register addressing
+*/
+
+static int cont_map[3] = { 0x40, 0x48, 0 };
+
+static int bpck_read_regr( PIA *pi, int cont, int regr )
+
+{ int r, l, h;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
+ l = r1();
+ t2(4);
+ h = r1();
+ return j44(l,h);
+
+ case 1: w0(r & 0xf); w0(r); t2(2);
+ e2(); t2(0x20);
+ t2(4); h = r0();
+ t2(1); t2(0x20);
+ return h;
+
+ case 2:
+ case 3:
+ case 4: w0(r); w2(9); w2(0); w2(0x20);
+ h = r4();
+ w2(0);
+ return h;
+
+ }
+ return -1;
+}
+
+static void bpck_write_regr( PIA *pi, int cont, int regr, int val )
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w0(r);
+ t2(2);
+ w0(val);
+ o2(); t2(4); t2(1);
+ break;
+
+ case 2:
+ case 3:
+ case 4: w0(r); w2(9); w2(0);
+ w0(val); w2(1); w2(3); w2(0);
+ break;
+
+ }
+}
+
+/* These macros access the bpck registers in native addressing */
+
+#define WR(r,v) bpck_write_regr(pi,2,r,v)
+#define RR(r) (bpck_read_regr(pi,2,r))
+
+static void bpck_write_block( PIA *pi, char * buf, int count )
+
+{ int i;
+
+ switch (pi->mode) {
+
+ case 0: WR(4,0x40);
+ w0(0x40); t2(2); t2(1);
+ for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
+ WR(4,0);
+ break;
+
+ case 1: WR(4,0x50);
+ w0(0x40); t2(2); t2(1);
+ for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
+ WR(4,0x10);
+ break;
+
+ case 2: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i=0;i<count;i++) w4(buf[i]);
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 3: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 4: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
+ w2(0);
+ WR(4,8);
+ break;
+ }
+}
+
+static void bpck_read_block( PIA *pi, char * buf, int count )
+
+{ int i, l, h;
+
+ switch (pi->mode) {
+
+ case 0: WR(4,0x40);
+ w0(0x40); t2(2);
+ for (i=0;i<count;i++) {
+ t2(4); l = r1();
+ t2(4); h = r1();
+ buf[i] = j44(l,h);
+ }
+ WR(4,0);
+ break;
+
+ case 1: WR(4,0x50);
+ w0(0x40); t2(2); t2(0x20);
+ for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
+ t2(1); t2(0x20);
+ WR(4,0x10);
+ break;
+
+ case 2: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i=0;i<count;i++) buf[i] = r4();
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 3: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
+ w2(0);
+ WR(4,8);
+ break;
+
+ case 4: WR(4,0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
+ w2(0);
+ WR(4,8);
+ break;
+
+ }
+}
+
+static int bpck_probe_unit ( PIA *pi )
+
+{ int o1, o0, f7, id;
+ int t, s;
+
+ id = pi->unit;
+ s = 0;
+ w2(4); w2(0xe); r2(); t2(2);
+ o1 = r1()&0xf8;
+ o0 = r0();
+ w0(255-id); w2(4); w0(id);
+ t2(8); t2(8); t2(8);
+ t2(2); t = r1()&0xf8;
+ f7 = ((id % 8) == 7);
+ if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
+ if ((t == o1) && ((!f7) || (s == o1))) {
+ w2(0x4c); w0(o0);
+ return 0;
+ }
+ t2(8); w0(0); t2(2); w2(0x4c); w0(o0);
+ return 1;
+}
+
+static void bpck_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ w0(0xff-pi->unit); w2(4); w0(pi->unit);
+ t2(8); t2(8); t2(8);
+ t2(2); t2(2);
+
+ switch (pi->mode) {
+
+ case 0: t2(8); WR(4,0);
+ break;
+
+ case 1: t2(8); WR(4,0x10);
+ break;
+
+ case 2:
+ case 3:
+ case 4: w2(0); WR(4,8);
+ break;
+
+ }
+
+ WR(5,8);
+
+ if (pi->devtype == PI_PCD) {
+ WR(0x46,0x10); /* fiddle with ESS logic ??? */
+ WR(0x4c,0x38);
+ WR(0x4d,0x88);
+ WR(0x46,0xa0);
+ WR(0x41,0);
+ WR(0x4e,8);
+ }
+}
+
+static void bpck_disconnect ( PIA *pi )
+
+{ w0(0);
+ if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
+ w2(0x4c); w0(pi->saved_r0);
+}
+
+static void bpck_force_spp ( PIA *pi )
+
+/* This fakes the EPP protocol to turn off EPP ... */
+
+{ pi->saved_r0 = r0();
+ w0(0xff-pi->unit); w2(4); w0(pi->unit);
+ t2(8); t2(8); t2(8);
+ t2(2); t2(2);
+
+ w2(0);
+ w0(4); w2(9); w2(0);
+ w0(0); w2(1); w2(3); w2(0);
+ w0(0); w2(9); w2(0);
+ w2(0x4c); w0(pi->saved_r0);
+}
+
+#define TEST_LEN 16
+
+static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int i, e, l, h, om;
+ char buf[TEST_LEN];
+
+ bpck_force_spp(pi);
+
+ switch (pi->mode) {
+
+ case 0: bpck_connect(pi);
+ WR(0x13,0x7f);
+ w0(0x13); t2(2);
+ for(i=0;i<TEST_LEN;i++) {
+ t2(4); l = r1();
+ t2(4); h = r1();
+ buf[i] = j44(l,h);
+ }
+ bpck_disconnect(pi);
+ break;
+
+ case 1: bpck_connect(pi);
+ WR(0x13,0x7f);
+ w0(0x13); t2(2); t2(0x20);
+ for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
+ t2(1); t2(0x20);
+ bpck_disconnect(pi);
+ break;
+
+ case 2:
+ case 3:
+ case 4: om = pi->mode;
+ pi->mode = 0;
+ bpck_connect(pi);
+ WR(7,3);
+ WR(4,8);
+ bpck_disconnect(pi);
+
+ pi->mode = om;
+ bpck_connect(pi);
+ w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
+
+ switch (pi->mode) {
+ case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
+ break;
+ case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
+ break;
+ case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
+ break;
+ }
+
+ w2(0);
+ WR(7,0);
+ bpck_disconnect(pi);
+
+ break;
+
+ }
+
+ if (verbose) {
+ printk("%s: bpck: 0x%x unit %d mode %d: ",
+ pi->device,pi->port,pi->unit,pi->mode);
+ for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
+ printk("\n");
+ }
+
+ e = 0;
+ for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
+ return e;
+}
+
+static void bpck_read_eeprom ( PIA *pi, char * buf )
+
+{ int i, j, k, p, v, f, om, od;
+
+ bpck_force_spp(pi);
+
+ om = pi->mode; od = pi->delay;
+ pi->mode = 0; pi->delay = 6;
+
+ bpck_connect(pi);
+
+ WR(4,0);
+ for (i=0;i<64;i++) {
+ WR(6,8);
+ WR(6,0xc);
+ p = 0x100;
+ for (k=0;k<9;k++) {
+ f = (((i + 0x180) & p) != 0) * 2;
+ WR(6,f+0xc);
+ WR(6,f+0xd);
+ WR(6,f+0xc);
+ p = (p >> 1);
+ }
+ for (j=0;j<2;j++) {
+ v = 0;
+ for (k=0;k<8;k++) {
+ WR(6,0xc);
+ WR(6,0xd);
+ WR(6,0xc);
+ f = RR(0);
+ v = 2*v + (f == 0x84);
+ }
+ buf[2*i+1-j] = v;
+ }
+ }
+ WR(6,8);
+ WR(6,0);
+ WR(5,8);
+
+ bpck_disconnect(pi);
+
+ if (om >= 2) {
+ bpck_connect(pi);
+ WR(7,3);
+ WR(4,8);
+ bpck_disconnect(pi);
+ }
+
+ pi->mode = om; pi->delay = od;
+}
+
+static int bpck_test_port ( PIA *pi ) /* check for 8-bit port */
+
+{ int i, r, m;
+
+ w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
+ m = -1;
+ if (r == i) m = 2;
+ if (r == (255-i)) m = 0;
+
+ w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
+ if (r != (255-i)) m = -1;
+
+ if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
+ if (m == 2) { w2(0x26); w2(0xc); }
+
+ if (m == -1) return 0;
+ return 5;
+}
+
+static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
+ "EPP-16","EPP-32" };
+
+#ifdef DUMP_EEPROM
+ int i;
+#endif
+
+ bpck_read_eeprom(pi,scratch);
+
+#ifdef DUMP_EEPROM
+ if (verbose) {
+ for(i=0;i<128;i++)
+ if ((scratch[i] < ' ') || (scratch[i] > '~'))
+ scratch[i] = '.';
+ printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch);
+ printk("%s: %64.64s\n",pi->device,&scratch[64]);
+ }
+#endif
+
+ printk("%s: bpck %s, backpack %8.8s unit %d",
+ pi->device,BPCK_VERSION,&scratch[110],pi->unit);
+ printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
+ pi->mode,mode_string[pi->mode],pi->delay);
+}
+
+static struct pi_protocol bpck = {
+ .owner = THIS_MODULE,
+ .name = "bpck",
+ .max_mode = 5,
+ .epp_first = 2,
+ .default_delay = 4,
+ .max_units = 255,
+ .write_regr = bpck_write_regr,
+ .read_regr = bpck_read_regr,
+ .write_block = bpck_write_block,
+ .read_block = bpck_read_block,
+ .connect = bpck_connect,
+ .disconnect = bpck_disconnect,
+ .test_port = bpck_test_port,
+ .probe_unit = bpck_probe_unit,
+ .test_proto = bpck_test_proto,
+ .log_adapter = bpck_log_adapter,
+};
+
+static int __init bpck_init(void)
+{
+ return paride_register(&bpck);
+}
+
+static void __exit bpck_exit(void)
+{
+ paride_unregister(&bpck);
+}
+
+MODULE_LICENSE("GPL");
+module_init(bpck_init)
+module_exit(bpck_exit)
diff --git a/drivers/block/paride/bpck6.c b/drivers/block/paride/bpck6.c
new file mode 100644
index 000000000..ec64e7f5d
--- /dev/null
+++ b/drivers/block/paride/bpck6.c
@@ -0,0 +1,267 @@
+/*
+ backpack.c (c) 2001 Micro Solutions Inc.
+ Released under the terms of the GNU General Public license
+
+ backpack.c is a low-level protocol driver for the Micro Solutions
+ "BACKPACK" parallel port IDE adapter
+ (Works on Series 6 drives)
+
+ Written by: Ken Hahn (linux-dev@micro-solutions.com)
+ Clive Turvey (linux-dev@micro-solutions.com)
+
+*/
+
+/*
+ This is Ken's linux wrapper for the PPC library
+ Version 1.0.0 is the backpack driver for which source is not available
+ Version 2.0.0 is the first to have source released
+ Version 2.0.1 is the "Cox-ified" source code
+ Version 2.0.2 - fixed version string usage, and made ppc functions static
+*/
+
+
+#define BACKPACK_VERSION "2.0.2"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <linux/parport.h>
+
+#include "ppc6lnx.c"
+#include "paride.h"
+
+/* PARAMETERS */
+static bool verbose; /* set this to 1 to see debugging messages and whatnot */
+
+
+#define PPCSTRUCT(pi) ((Interface *)(pi->private))
+
+/****************************************************************/
+/*
+ ATAPI CDROM DRIVE REGISTERS
+*/
+#define ATAPI_DATA 0 /* data port */
+#define ATAPI_ERROR 1 /* error register (read) */
+#define ATAPI_FEATURES 1 /* feature register (write) */
+#define ATAPI_INT_REASON 2 /* interrupt reason register */
+#define ATAPI_COUNT_LOW 4 /* byte count register (low) */
+#define ATAPI_COUNT_HIGH 5 /* byte count register (high) */
+#define ATAPI_DRIVE_SEL 6 /* drive select register */
+#define ATAPI_STATUS 7 /* status port (read) */
+#define ATAPI_COMMAND 7 /* command port (write) */
+#define ATAPI_ALT_STATUS 0x0e /* alternate status reg (read) */
+#define ATAPI_DEVICE_CONTROL 0x0e /* device control (write) */
+/****************************************************************/
+
+static int bpck6_read_regr(PIA *pi, int cont, int reg)
+{
+ unsigned int out;
+
+ /* check for bad settings */
+ if (reg<0 || reg>7 || cont<0 || cont>2)
+ {
+ return(-1);
+ }
+ out=ppc6_rd_port(PPCSTRUCT(pi),cont?reg|8:reg);
+ return(out);
+}
+
+static void bpck6_write_regr(PIA *pi, int cont, int reg, int val)
+{
+ /* check for bad settings */
+ if (reg>=0 && reg<=7 && cont>=0 && cont<=1)
+ {
+ ppc6_wr_port(PPCSTRUCT(pi),cont?reg|8:reg,(u8)val);
+ }
+}
+
+static void bpck6_write_block( PIA *pi, char * buf, int len )
+{
+ ppc6_wr_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1);
+}
+
+static void bpck6_read_block( PIA *pi, char * buf, int len )
+{
+ ppc6_rd_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1);
+}
+
+static void bpck6_connect ( PIA *pi )
+{
+ if(verbose)
+ {
+ printk(KERN_DEBUG "connect\n");
+ }
+
+ if(pi->mode >=2)
+ {
+ PPCSTRUCT(pi)->mode=4+pi->mode-2;
+ }
+ else if(pi->mode==1)
+ {
+ PPCSTRUCT(pi)->mode=3;
+ }
+ else
+ {
+ PPCSTRUCT(pi)->mode=1;
+ }
+
+ ppc6_open(PPCSTRUCT(pi));
+ ppc6_wr_extout(PPCSTRUCT(pi),0x3);
+}
+
+static void bpck6_disconnect ( PIA *pi )
+{
+ if(verbose)
+ {
+ printk("disconnect\n");
+ }
+ ppc6_wr_extout(PPCSTRUCT(pi),0x0);
+ ppc6_close(PPCSTRUCT(pi));
+}
+
+static int bpck6_test_port ( PIA *pi ) /* check for 8-bit port */
+{
+ if(verbose)
+ {
+ printk(KERN_DEBUG "PARPORT indicates modes=%x for lp=0x%lx\n",
+ ((struct pardevice*)(pi->pardev))->port->modes,
+ ((struct pardevice *)(pi->pardev))->port->base);
+ }
+
+ /*copy over duplicate stuff.. initialize state info*/
+ PPCSTRUCT(pi)->ppc_id=pi->unit;
+ PPCSTRUCT(pi)->lpt_addr=pi->port;
+
+ /* look at the parport device to see if what modes we can use */
+ if(((struct pardevice *)(pi->pardev))->port->modes &
+ (PARPORT_MODE_EPP)
+ )
+ {
+ return 5; /* Can do EPP*/
+ }
+ else if(((struct pardevice *)(pi->pardev))->port->modes &
+ (PARPORT_MODE_TRISTATE)
+ )
+ {
+ return 2;
+ }
+ else /*Just flat SPP*/
+ {
+ return 1;
+ }
+}
+
+static int bpck6_probe_unit ( PIA *pi )
+{
+ int out;
+
+ if(verbose)
+ {
+ printk(KERN_DEBUG "PROBE UNIT %x on port:%x\n",pi->unit,pi->port);
+ }
+
+ /*SET PPC UNIT NUMBER*/
+ PPCSTRUCT(pi)->ppc_id=pi->unit;
+
+ /*LOWER DOWN TO UNIDIRECTIONAL*/
+ PPCSTRUCT(pi)->mode=1;
+
+ out=ppc6_open(PPCSTRUCT(pi));
+
+ if(verbose)
+ {
+ printk(KERN_DEBUG "ppc_open returned %2x\n",out);
+ }
+
+ if(out)
+ {
+ ppc6_close(PPCSTRUCT(pi));
+ if(verbose)
+ {
+ printk(KERN_DEBUG "leaving probe\n");
+ }
+ return(1);
+ }
+ else
+ {
+ if(verbose)
+ {
+ printk(KERN_DEBUG "Failed open\n");
+ }
+ return(0);
+ }
+}
+
+static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose )
+{
+ char *mode_string[5]=
+ {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n",pi->device);
+ printk("%s: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.\n",pi->device);
+ printk("%s: BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
+ pi->device,BACKPACK_VERSION,pi->port);
+ printk("%s: Unit: %d Mode:%d (%s) Delay %d\n",pi->device,
+ pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
+}
+
+static int bpck6_init_proto(PIA *pi)
+{
+ Interface *p = kzalloc(sizeof(Interface), GFP_KERNEL);
+
+ if (p) {
+ pi->private = (unsigned long)p;
+ return 0;
+ }
+
+ printk(KERN_ERR "%s: ERROR COULDN'T ALLOCATE MEMORY\n", pi->device);
+ return -1;
+}
+
+static void bpck6_release_proto(PIA *pi)
+{
+ kfree((void *)(pi->private));
+}
+
+static struct pi_protocol bpck6 = {
+ .owner = THIS_MODULE,
+ .name = "bpck6",
+ .max_mode = 5,
+ .epp_first = 2, /* 2-5 use epp (need 8 ports) */
+ .max_units = 255,
+ .write_regr = bpck6_write_regr,
+ .read_regr = bpck6_read_regr,
+ .write_block = bpck6_write_block,
+ .read_block = bpck6_read_block,
+ .connect = bpck6_connect,
+ .disconnect = bpck6_disconnect,
+ .test_port = bpck6_test_port,
+ .probe_unit = bpck6_probe_unit,
+ .log_adapter = bpck6_log_adapter,
+ .init_proto = bpck6_init_proto,
+ .release_proto = bpck6_release_proto,
+};
+
+static int __init bpck6_init(void)
+{
+ printk(KERN_INFO "bpck6: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n");
+ printk(KERN_INFO "bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA\n");
+ if(verbose)
+ printk(KERN_DEBUG "bpck6: verbose debug enabled.\n");
+ return paride_register(&bpck6);
+}
+
+static void __exit bpck6_exit(void)
+{
+ paride_unregister(&bpck6);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Micro Solutions Inc.");
+MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE");
+module_param(verbose, bool, 0644);
+module_init(bpck6_init)
+module_exit(bpck6_exit)
diff --git a/drivers/block/paride/comm.c b/drivers/block/paride/comm.c
new file mode 100644
index 000000000..9bcd35495
--- /dev/null
+++ b/drivers/block/paride/comm.c
@@ -0,0 +1,218 @@
+/*
+ comm.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ comm.c is a low-level protocol driver for some older models
+ of the DataStor "Commuter" parallel to IDE adapter. Some of
+ the parallel port devices marketed by Arista currently
+ use this adapter.
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.05 init_proto, release_proto
+
+*/
+
+#define COMM_VERSION "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes: 0 nybble reads, 8-bit writes
+ 1 8-bit reads and writes
+ 2 8-bit EPP mode
+*/
+
+#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0))
+
+#define P1 w2(5);w2(0xd);w2(0xd);w2(5);w2(4);
+#define P2 w2(5);w2(7);w2(7);w2(5);w2(4);
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x08, 0x10 };
+
+static int comm_read_regr( PIA *pi, int cont, int regr )
+
+{ int l, h, r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: w0(r); P1; w0(0);
+ w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
+ return j44(l,h);
+
+ case 1: w0(r+0x20); P1;
+ w0(0); w2(0x26); h = r0(); w2(4);
+ return h;
+
+ case 2:
+ case 3:
+ case 4: w3(r+0x20); (void)r1();
+ w2(0x24); h = r4(); w2(4);
+ return h;
+
+ }
+ return -1;
+}
+
+static void comm_write_regr( PIA *pi, int cont, int regr, int val )
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w0(r); P1; w0(val); P2;
+ break;
+
+ case 2:
+ case 3:
+ case 4: w3(r); (void)r1(); w4(val);
+ break;
+ }
+}
+
+static void comm_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4); w0(0xff); w2(6);
+ w2(4); w0(0xaa); w2(6);
+ w2(4); w0(0x00); w2(6);
+ w2(4); w0(0x87); w2(6);
+ w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
+}
+
+static void comm_disconnect ( PIA *pi )
+
+{ w2(0); w2(0); w2(0); w2(4);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void comm_read_block( PIA *pi, char * buf, int count )
+
+{ int i, l, h;
+
+ switch (pi->mode) {
+
+ case 0: w0(0x48); P1;
+ for(i=0;i<count;i++) {
+ w0(0); w2(6); l = r1();
+ w0(0x80); h = r1(); w2(4);
+ buf[i] = j44(l,h);
+ }
+ break;
+
+ case 1: w0(0x68); P1; w0(0);
+ for(i=0;i<count;i++) {
+ w2(0x26); buf[i] = r0(); w2(0x24);
+ }
+ w2(4);
+ break;
+
+ case 2: w3(0x68); (void)r1(); w2(0x24);
+ for (i=0;i<count;i++) buf[i] = r4();
+ w2(4);
+ break;
+
+ case 3: w3(0x68); (void)r1(); w2(0x24);
+ for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
+ w2(4);
+ break;
+
+ case 4: w3(0x68); (void)r1(); w2(0x24);
+ for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
+ w2(4);
+ break;
+
+ }
+}
+
+/* NB: Watch out for the byte swapped writes ! */
+
+static void comm_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w0(0x68); P1;
+ for (k=0;k<count;k++) {
+ w2(5); w0(buf[k^1]); w2(7);
+ }
+ w2(5); w2(4);
+ break;
+
+ case 2: w3(0x48); (void)r1();
+ for (k=0;k<count;k++) w4(buf[k^1]);
+ break;
+
+ case 3: w3(0x48); (void)r1();
+ for (k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
+ break;
+
+ case 4: w3(0x48); (void)r1();
+ for (k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
+ break;
+
+
+ }
+}
+
+static void comm_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: comm %s, DataStor Commuter at 0x%x, ",
+ pi->device,COMM_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol comm = {
+ .owner = THIS_MODULE,
+ .name = "comm",
+ .max_mode = 5,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = comm_write_regr,
+ .read_regr = comm_read_regr,
+ .write_block = comm_write_block,
+ .read_block = comm_read_block,
+ .connect = comm_connect,
+ .disconnect = comm_disconnect,
+ .log_adapter = comm_log_adapter,
+};
+
+static int __init comm_init(void)
+{
+ return paride_register(&comm);
+}
+
+static void __exit comm_exit(void)
+{
+ paride_unregister(&comm);
+}
+
+MODULE_LICENSE("GPL");
+module_init(comm_init)
+module_exit(comm_exit)
diff --git a/drivers/block/paride/dstr.c b/drivers/block/paride/dstr.c
new file mode 100644
index 000000000..accc5c777
--- /dev/null
+++ b/drivers/block/paride/dstr.c
@@ -0,0 +1,233 @@
+/*
+ dstr.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ dstr.c is a low-level protocol driver for the
+ DataStor EP2000 parallel to IDE adapter chip.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define DSTR_VERSION "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes: 0 nybble reads, 8-bit writes
+ 1 8-bit reads and writes
+ 2 8-bit EPP mode
+ 3 EPP-16
+ 4 EPP-32
+*/
+
+#define j44(a,b) (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80))
+
+#define P1 w2(5);w2(0xd);w2(5);w2(4);
+#define P2 w2(5);w2(7);w2(5);w2(4);
+#define P3 w2(6);w2(4);w2(6);w2(4);
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x20, 0x40 };
+
+static int dstr_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ r = regr + cont_map[cont];
+
+ w0(0x81); P1;
+ if (pi->mode) { w0(0x11); } else { w0(1); }
+ P2; w0(r); P1;
+
+ switch (pi->mode) {
+
+ case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
+ return j44(a,b);
+
+ case 1: w0(0); w2(0x26); a = r0(); w2(4);
+ return a;
+
+ case 2:
+ case 3:
+ case 4: w2(0x24); a = r4(); w2(4);
+ return a;
+
+ }
+ return -1;
+}
+
+static void dstr_write_regr( PIA *pi, int cont, int regr, int val )
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ w0(0x81); P1;
+ if (pi->mode >= 2) { w0(0x11); } else { w0(1); }
+ P2; w0(r); P1;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w0(val); w2(5); w2(7); w2(5); w2(4);
+ break;
+
+ case 2:
+ case 3:
+ case 4: w4(val);
+ break;
+ }
+}
+
+#define CCP(x) w0(0xff);w2(0xc);w2(4);\
+ w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
+ w0(x);w2(5);w2(4);
+
+static void dstr_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4); CCP(0xe0); w0(0xff);
+}
+
+static void dstr_disconnect ( PIA *pi )
+
+{ CCP(0x30);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void dstr_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b;
+
+ w0(0x81); P1;
+ if (pi->mode) { w0(0x19); } else { w0(9); }
+ P2; w0(0x82); P1; P3; w0(0x20); P1;
+
+ switch (pi->mode) {
+
+ case 0: for (k=0;k<count;k++) {
+ w2(6); a = r1(); w2(4);
+ w2(6); b = r1(); w2(4);
+ buf[k] = j44(a,b);
+ }
+ break;
+
+ case 1: w0(0);
+ for (k=0;k<count;k++) {
+ w2(0x26); buf[k] = r0(); w2(0x24);
+ }
+ w2(4);
+ break;
+
+ case 2: w2(0x24);
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(4);
+ break;
+
+ case 3: w2(0x24);
+ for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+ w2(4);
+ break;
+
+ case 4: w2(0x24);
+ for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+ w2(4);
+ break;
+
+ }
+}
+
+static void dstr_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ w0(0x81); P1;
+ if (pi->mode) { w0(0x19); } else { w0(9); }
+ P2; w0(0x82); P1; P3; w0(0x20); P1;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: for (k=0;k<count;k++) {
+ w2(5); w0(buf[k]); w2(7);
+ }
+ w2(5); w2(4);
+ break;
+
+ case 2: w2(0xc5);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(0xc4);
+ break;
+
+ case 3: w2(0xc5);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ w2(0xc4);
+ break;
+
+ case 4: w2(0xc5);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ w2(0xc4);
+ break;
+
+ }
+}
+
+
+static void dstr_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
+ "EPP-16","EPP-32"};
+
+ printk("%s: dstr %s, DataStor EP2000 at 0x%x, ",
+ pi->device,DSTR_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol dstr = {
+ .owner = THIS_MODULE,
+ .name = "dstr",
+ .max_mode = 5,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = dstr_write_regr,
+ .read_regr = dstr_read_regr,
+ .write_block = dstr_write_block,
+ .read_block = dstr_read_block,
+ .connect = dstr_connect,
+ .disconnect = dstr_disconnect,
+ .log_adapter = dstr_log_adapter,
+};
+
+static int __init dstr_init(void)
+{
+ return paride_register(&dstr);
+}
+
+static void __exit dstr_exit(void)
+{
+ paride_unregister(&dstr);
+}
+
+MODULE_LICENSE("GPL");
+module_init(dstr_init)
+module_exit(dstr_exit)
diff --git a/drivers/block/paride/epat.c b/drivers/block/paride/epat.c
new file mode 100644
index 000000000..1bcdff773
--- /dev/null
+++ b/drivers/block/paride/epat.c
@@ -0,0 +1,340 @@
+/*
+ epat.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is the low level protocol driver for the EPAT parallel
+ to IDE adapter from Shuttle Technologies. This adapter is
+ used in many popular parallel port disk products such as the
+ SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+ 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
+
+*/
+
+#define EPAT_VERSION "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
+#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
+
+static int epatc8;
+
+module_param(epatc8, int, 0);
+MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
+ "used in any recent Imation SuperDisk (LS-120) drive.");
+
+/* cont = 0 IDE register file
+ cont = 1 IDE control registers
+ cont = 2 internal EPAT registers
+*/
+
+static int cont_map[3] = { 0x18, 0x10, 0 };
+
+static void epat_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(0x60+r); w2(1); w0(val); w2(4);
+ break;
+
+ case 3:
+ case 4:
+ case 5: w3(0x40+r); w4(val);
+ break;
+
+ }
+}
+
+static int epat_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: w0(r); w2(1); w2(3);
+ a = r1(); w2(4); b = r1();
+ return j44(a,b);
+
+ case 1: w0(0x40+r); w2(1); w2(4);
+ a = r1(); b = r2(); w0(0xff);
+ return j53(a,b);
+
+ case 2: w0(0x20+r); w2(1); w2(0x25);
+ a = r0(); w2(4);
+ return a;
+
+ case 3:
+ case 4:
+ case 5: w3(r); w2(0x24); a = r4(); w2(4);
+ return a;
+
+ }
+ return -1; /* never gets here */
+}
+
+static void epat_read_block( PIA *pi, char * buf, int count )
+
+{ int k, ph, a, b;
+
+ switch (pi->mode) {
+
+ case 0: w0(7); w2(1); w2(3); w0(0xff);
+ ph = 0;
+ for(k=0;k<count;k++) {
+ if (k == count-1) w0(0xfd);
+ w2(6+ph); a = r1();
+ if (a & 8) b = a;
+ else { w2(4+ph); b = r1(); }
+ buf[k] = j44(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 1: w0(0x47); w2(1); w2(5); w0(0xff);
+ ph = 0;
+ for(k=0;k<count;k++) {
+ if (k == count-1) w0(0xfd);
+ w2(4+ph);
+ a = r1(); b = r2();
+ buf[k] = j53(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 2: w0(0x27); w2(1); w2(0x25); w0(0);
+ ph = 0;
+ for(k=0;k<count-1;k++) {
+ w2(0x24+ph);
+ buf[k] = r0();
+ ph = 1 - ph;
+ }
+ w2(0x26); w2(0x27); buf[count-1] = r0();
+ w2(0x25); w2(4);
+ break;
+
+ case 3: w3(0x80); w2(0x24);
+ for(k=0;k<count-1;k++) buf[k] = r4();
+ w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 4: w3(0x80); w2(0x24);
+ for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+ buf[count-2] = r4();
+ w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 5: w3(0x80); w2(0x24);
+ for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+ for(k=count-4;k<count-1;k++) buf[k] = r4();
+ w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+ w2(4);
+ break;
+
+ }
+}
+
+static void epat_write_block( PIA *pi, char * buf, int count )
+
+{ int ph, k;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(0x67); w2(1); w2(5);
+ ph = 0;
+ for(k=0;k<count;k++) {
+ w0(buf[k]);
+ w2(4+ph);
+ ph = 1 - ph;
+ }
+ w2(7); w2(4);
+ break;
+
+ case 3: w3(0xc0);
+ for(k=0;k<count;k++) w4(buf[k]);
+ w2(4);
+ break;
+
+ case 4: w3(0xc0);
+ for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
+ w2(4);
+ break;
+
+ case 5: w3(0xc0);
+ for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
+ w2(4);
+ break;
+
+ }
+}
+
+/* these macros access the EPAT registers in native addressing */
+
+#define WR(r,v) epat_write_regr(pi,2,r,v)
+#define RR(r) (epat_read_regr(pi,2,r))
+
+/* and these access the IDE task file */
+
+#define WRi(r,v) epat_write_regr(pi,0,r,v)
+#define RRi(r) (epat_read_regr(pi,0,r))
+
+/* FIXME: the CPP stuff should be fixed to handle multiple EPATs on a chain */
+
+#define CPP(x) w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
+ w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+
+static void epat_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ /* Initialize the chip */
+ CPP(0);
+
+ if (epatc8) {
+ CPP(0x40);CPP(0xe0);
+ w0(0);w2(1);w2(4);
+ WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
+ WR(0xe,0xf);WR(0xf,4);
+ /* WR(0xe,0xa);WR(0xf,4); */
+ WR(0xe,0xd);WR(0xf,0);
+ /* CPP(0x30); */
+ }
+
+ /* Connect to the chip */
+ CPP(0xe0);
+ w0(0);w2(1);w2(4); /* Idle into SPP */
+ if (pi->mode >= 3) {
+ w0(0);w2(1);w2(4);w2(0xc);
+ /* Request EPP */
+ w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
+ }
+
+ if (!epatc8) {
+ WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
+ }
+}
+
+static void epat_disconnect (PIA *pi)
+{ CPP(0x30);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static int epat_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int k, j, f, cc;
+ int e[2] = {0,0};
+
+ epat_connect(pi);
+ cc = RR(0xd);
+ epat_disconnect(pi);
+
+ epat_connect(pi);
+ for (j=0;j<2;j++) {
+ WRi(6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ WRi(2,k^0xaa);
+ WRi(3,k^0x55);
+ if (RRi(2) != (k^0xaa)) e[j]++;
+ }
+ }
+ epat_disconnect(pi);
+
+ f = 0;
+ epat_connect(pi);
+ WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
+ epat_read_block(pi,scratch,512);
+
+ for (k=0;k<256;k++) {
+ if ((scratch[2*k] & 0xff) != k) f++;
+ if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
+ }
+ epat_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+ pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
+ }
+
+ return (e[0] && e[1]) || f;
+}
+
+static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ int ver;
+ char *mode_string[6] =
+ {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
+
+ epat_connect(pi);
+ WR(0xa,0x38); /* read the version code */
+ ver = RR(0xb);
+ epat_disconnect(pi);
+
+ printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
+ pi->device,EPAT_VERSION,ver,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol epat = {
+ .owner = THIS_MODULE,
+ .name = "epat",
+ .max_mode = 6,
+ .epp_first = 3,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = epat_write_regr,
+ .read_regr = epat_read_regr,
+ .write_block = epat_write_block,
+ .read_block = epat_read_block,
+ .connect = epat_connect,
+ .disconnect = epat_disconnect,
+ .test_proto = epat_test_proto,
+ .log_adapter = epat_log_adapter,
+};
+
+static int __init epat_init(void)
+{
+#ifdef CONFIG_PARIDE_EPATC8
+ epatc8 = 1;
+#endif
+ return paride_register(&epat);
+}
+
+static void __exit epat_exit(void)
+{
+ paride_unregister(&epat);
+}
+
+MODULE_LICENSE("GPL");
+module_init(epat_init)
+module_exit(epat_exit)
diff --git a/drivers/block/paride/epia.c b/drivers/block/paride/epia.c
new file mode 100644
index 000000000..fb0e782d0
--- /dev/null
+++ b/drivers/block/paride/epia.c
@@ -0,0 +1,316 @@
+/*
+ epia.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ epia.c is a low-level protocol driver for Shuttle Technologies
+ EPIA parallel to IDE adapter chip. This device is now obsolete
+ and has been replaced with the EPAT chip, which is supported
+ by epat.c, however, some devices based on EPIA are still
+ available.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+ 1.02 GRG 1998.06.17 support older versions of EPIA
+
+*/
+
+#define EPIA_VERSION "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes: 0 nybble reads on port 1, 8-bit writes
+ 1 5/3 reads on ports 1 & 2, 8-bit writes
+ 2 8-bit reads and writes
+ 3 8-bit EPP mode
+ 4 16-bit EPP
+ 5 32-bit EPP
+*/
+
+#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
+#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
+
+/* cont = 0 IDE register file
+ cont = 1 IDE control registers
+*/
+
+static int cont_map[2] = { 0, 0x80 };
+
+static int epia_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ regr += cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: r = regr^0x39;
+ w0(r); w2(1); w2(3); w0(r);
+ a = r1(); w2(1); b = r1(); w2(4);
+ return j44(a,b);
+
+ case 1: r = regr^0x31;
+ w0(r); w2(1); w0(r&0x37);
+ w2(3); w2(5); w0(r|0xf0);
+ a = r1(); b = r2(); w2(4);
+ return j53(a,b);
+
+ case 2: r = regr^0x29;
+ w0(r); w2(1); w2(0X21); w2(0x23);
+ a = r0(); w2(4);
+ return a;
+
+ case 3:
+ case 4:
+ case 5: w3(regr); w2(0x24); a = r4(); w2(4);
+ return a;
+
+ }
+ return -1;
+}
+
+static void epia_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ regr += cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: r = regr^0x19;
+ w0(r); w2(1); w0(val); w2(3); w2(4);
+ break;
+
+ case 3:
+ case 4:
+ case 5: r = regr^0x40;
+ w3(r); w4(val); w2(4);
+ break;
+ }
+}
+
+#define WR(r,v) epia_write_regr(pi,0,r,v)
+#define RR(r) (epia_read_regr(pi,0,r))
+
+/* The use of register 0x84 is entirely unclear - it seems to control
+ some EPP counters ... currently we know about 3 different block
+ sizes: the standard 512 byte reads and writes, 12 byte writes and
+ 2048 byte reads (the last two being used in the CDrom drivers.
+*/
+
+static void epia_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
+ w2(1); w2(4);
+ if (pi->mode >= 3) {
+ w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
+ w2(0x24); w2(0x26); w2(4);
+ }
+ WR(0x86,8);
+}
+
+static void epia_disconnect ( PIA *pi )
+
+{ /* WR(0x84,0x10); */
+ w0(pi->saved_r0);
+ w2(1); w2(4);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void epia_read_block( PIA *pi, char * buf, int count )
+
+{ int k, ph, a, b;
+
+ switch (pi->mode) {
+
+ case 0: w0(0x81); w2(1); w2(3); w0(0xc1);
+ ph = 1;
+ for (k=0;k<count;k++) {
+ w2(2+ph); a = r1();
+ w2(4+ph); b = r1();
+ buf[k] = j44(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 1: w0(0x91); w2(1); w0(0x10); w2(3);
+ w0(0x51); w2(5); w0(0xd1);
+ ph = 1;
+ for (k=0;k<count;k++) {
+ w2(4+ph);
+ a = r1(); b = r2();
+ buf[k] = j53(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 2: w0(0x89); w2(1); w2(0x23); w2(0x21);
+ ph = 1;
+ for (k=0;k<count;k++) {
+ w2(0x24+ph);
+ buf[k] = r0();
+ ph = 1 - ph;
+ }
+ w2(6); w2(4);
+ break;
+
+ case 3: if (count > 512) WR(0x84,3);
+ w3(0); w2(0x24);
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(4); WR(0x84,0);
+ break;
+
+ case 4: if (count > 512) WR(0x84,3);
+ w3(0); w2(0x24);
+ for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+ w2(4); WR(0x84,0);
+ break;
+
+ case 5: if (count > 512) WR(0x84,3);
+ w3(0); w2(0x24);
+ for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+ w2(4); WR(0x84,0);
+ break;
+
+ }
+}
+
+static void epia_write_block( PIA *pi, char * buf, int count )
+
+{ int ph, k, last, d;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5);
+ ph = 0; last = 0x8000;
+ for (k=0;k<count;k++) {
+ d = buf[k];
+ if (d != last) { last = d; w0(d); }
+ w2(4+ph);
+ ph = 1 - ph;
+ }
+ w2(7); w2(4);
+ break;
+
+ case 3: if (count < 512) WR(0x84,1);
+ w3(0x40);
+ for (k=0;k<count;k++) w4(buf[k]);
+ if (count < 512) WR(0x84,0);
+ break;
+
+ case 4: if (count < 512) WR(0x84,1);
+ w3(0x40);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ if (count < 512) WR(0x84,0);
+ break;
+
+ case 5: if (count < 512) WR(0x84,1);
+ w3(0x40);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ if (count < 512) WR(0x84,0);
+ break;
+
+ }
+
+}
+
+static int epia_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int j, k, f;
+ int e[2] = {0,0};
+
+ epia_connect(pi);
+ for (j=0;j<2;j++) {
+ WR(6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ WR(2,k^0xaa);
+ WR(3,k^0x55);
+ if (RR(2) != (k^0xaa)) e[j]++;
+ }
+ WR(2,1); WR(3,1);
+ }
+ epia_disconnect(pi);
+
+ f = 0;
+ epia_connect(pi);
+ WR(0x84,8);
+ epia_read_block(pi,scratch,512);
+ for (k=0;k<256;k++) {
+ if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++;
+ if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++;
+ }
+ WR(0x84,0);
+ epia_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->device,pi->port,pi->mode,e[0],e[1],f);
+ }
+
+ return (e[0] && e[1]) || f;
+
+}
+
+
+static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[6] = {"4-bit","5/3","8-bit",
+ "EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: epia %s, Shuttle EPIA at 0x%x, ",
+ pi->device,EPIA_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol epia = {
+ .owner = THIS_MODULE,
+ .name = "epia",
+ .max_mode = 6,
+ .epp_first = 3,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = epia_write_regr,
+ .read_regr = epia_read_regr,
+ .write_block = epia_write_block,
+ .read_block = epia_read_block,
+ .connect = epia_connect,
+ .disconnect = epia_disconnect,
+ .test_proto = epia_test_proto,
+ .log_adapter = epia_log_adapter,
+};
+
+static int __init epia_init(void)
+{
+ return paride_register(&epia);
+}
+
+static void __exit epia_exit(void)
+{
+ paride_unregister(&epia);
+}
+
+MODULE_LICENSE("GPL");
+module_init(epia_init)
+module_exit(epia_exit)
diff --git a/drivers/block/paride/fit2.c b/drivers/block/paride/fit2.c
new file mode 100644
index 000000000..381283753
--- /dev/null
+++ b/drivers/block/paride/fit2.c
@@ -0,0 +1,151 @@
+/*
+ fit2.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ fit2.c is a low-level protocol driver for the older version
+ of the Fidelity International Technology parallel port adapter.
+ This adapter is used in their TransDisk 2000 and older TransDisk
+ 3000 portable hard-drives. As far as I can tell, this device
+ supports 4-bit mode _only_.
+
+ Newer models of the FIT products use an enhanced protocol.
+ The "fit3" protocol module should support current drives.
+
+*/
+
+#define FIT2_VERSION "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+
+NB: The FIT adapter does not appear to use the control registers.
+So, we map ALT_STATUS to STATUS and NO-OP writes to the device
+control register - this means that IDE reset will not work on these
+devices.
+
+*/
+
+static void fit2_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ if (cont == 1) return;
+ w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
+}
+
+static int fit2_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ if (cont) {
+ if (regr != 6) return 0xff;
+ r = 7;
+ } else r = regr + 0x10;
+
+ w2(0xc); w0(r); w2(4); w2(5);
+ w0(0); a = r1();
+ w0(1); b = r1();
+ w2(4);
+
+ return j44(a,b);
+
+}
+
+static void fit2_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b, c, d;
+
+ w2(0xc); w0(0x10);
+
+ for (k=0;k<count/4;k++) {
+
+ w2(4); w2(5);
+ w0(0); a = r1(); w0(1); b = r1();
+ w0(3); c = r1(); w0(2); d = r1();
+ buf[4*k+0] = j44(a,b);
+ buf[4*k+1] = j44(d,c);
+
+ w2(4); w2(5);
+ a = r1(); w0(3); b = r1();
+ w0(1); c = r1(); w0(0); d = r1();
+ buf[4*k+2] = j44(d,c);
+ buf[4*k+3] = j44(a,b);
+
+ }
+
+ w2(4);
+
+}
+
+static void fit2_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+
+ w2(0xc); w0(0);
+ for (k=0;k<count/2;k++) {
+ w2(4); w0(buf[2*k]);
+ w2(5); w0(buf[2*k+1]);
+ }
+ w2(4);
+}
+
+static void fit2_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(0xcc);
+}
+
+static void fit2_disconnect ( PIA *pi )
+
+{ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
+ pi->device,FIT2_VERSION,pi->port,pi->delay);
+
+}
+
+static struct pi_protocol fit2 = {
+ .owner = THIS_MODULE,
+ .name = "fit2",
+ .max_mode = 1,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = fit2_write_regr,
+ .read_regr = fit2_read_regr,
+ .write_block = fit2_write_block,
+ .read_block = fit2_read_block,
+ .connect = fit2_connect,
+ .disconnect = fit2_disconnect,
+ .log_adapter = fit2_log_adapter,
+};
+
+static int __init fit2_init(void)
+{
+ return paride_register(&fit2);
+}
+
+static void __exit fit2_exit(void)
+{
+ paride_unregister(&fit2);
+}
+
+MODULE_LICENSE("GPL");
+module_init(fit2_init)
+module_exit(fit2_exit)
diff --git a/drivers/block/paride/fit3.c b/drivers/block/paride/fit3.c
new file mode 100644
index 000000000..275d26945
--- /dev/null
+++ b/drivers/block/paride/fit3.c
@@ -0,0 +1,211 @@
+/*
+ fit3.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ fit3.c is a low-level protocol driver for newer models
+ of the Fidelity International Technology parallel port adapter.
+ This adapter is used in their TransDisk 3000 portable
+ hard-drives, as well as CD-ROM, PD-CD and other devices.
+
+ The TD-2000 and certain older devices use a different protocol.
+ Try the fit2 protocol module with them.
+
+ NB: The FIT adapters do not appear to support the control
+ registers. So, we map ALT_STATUS to STATUS and NO-OP writes
+ to the device control register - this means that IDE reset
+ will not work on these devices.
+
+*/
+
+#define FIT3_VERSION "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0))
+
+#define w7(byte) {out_p(7,byte);}
+#define r7() (in_p(7) & 0xff)
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+
+*/
+
+static void fit3_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ if (cont == 1) return;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc);
+ w0(val); w2(0xd);
+ w0(0); w2(0xc);
+ break;
+
+ case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc);
+ w4(val); w4(0);
+ w2(0xc);
+ break;
+
+ }
+}
+
+static int fit3_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b;
+
+ if (cont) {
+ if (regr != 6) return 0xff;
+ regr = 7;
+ }
+
+ switch (pi->mode) {
+
+ case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
+ w2(0xd); a = r1();
+ w2(0xf); b = r1();
+ w2(0xc);
+ return j44(a,b);
+
+ case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+ w2(0xec); w2(0xee); w2(0xef); a = r0();
+ w2(0xc);
+ return a;
+
+ case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+ w2(0xec);
+ a = r4(); b = r4();
+ w2(0xc);
+ return a;
+
+ }
+ return -1;
+
+}
+
+static void fit3_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b, c, d;
+
+ switch (pi->mode) {
+
+ case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc);
+ for (k=0;k<count/2;k++) {
+ w2(0xd); a = r1();
+ w2(0xf); b = r1();
+ w2(0xc); c = r1();
+ w2(0xe); d = r1();
+ buf[2*k ] = j44(a,b);
+ buf[2*k+1] = j44(c,d);
+ }
+ w2(0xc);
+ break;
+
+ case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc);
+ w2(0xec); w2(0xee);
+ for (k=0;k<count/2;k++) {
+ w2(0xef); a = r0();
+ w2(0xee); b = r0();
+ buf[2*k ] = a;
+ buf[2*k+1] = b;
+ }
+ w2(0xec);
+ w2(0xc);
+ break;
+
+ case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc);
+ w2(0xec);
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(0xc);
+ break;
+
+ }
+}
+
+static void fit3_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w2(0xc); w0(0); w2(0x8); w2(0xc);
+ for (k=0;k<count/2;k++) {
+ w0(buf[2*k ]); w2(0xd);
+ w0(buf[2*k+1]); w2(0xc);
+ }
+ break;
+
+ case 2: w2(0xc); w0(0); w2(0x8); w2(0xc);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(0xc);
+ break;
+ }
+}
+
+static void fit3_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(0xc); w0(0); w2(0xa);
+ if (pi->mode == 2) {
+ w2(0xc); w0(0x9); w2(0x8); w2(0xc);
+ }
+}
+
+static void fit3_disconnect ( PIA *pi )
+
+{ w2(0xc); w0(0xa); w2(0x8); w2(0xc);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
+
+ printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, "
+ "mode %d (%s), delay %d\n",
+ pi->device,FIT3_VERSION,pi->port,
+ pi->mode,mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol fit3 = {
+ .owner = THIS_MODULE,
+ .name = "fit3",
+ .max_mode = 3,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = fit3_write_regr,
+ .read_regr = fit3_read_regr,
+ .write_block = fit3_write_block,
+ .read_block = fit3_read_block,
+ .connect = fit3_connect,
+ .disconnect = fit3_disconnect,
+ .log_adapter = fit3_log_adapter,
+};
+
+static int __init fit3_init(void)
+{
+ return paride_register(&fit3);
+}
+
+static void __exit fit3_exit(void)
+{
+ paride_unregister(&fit3);
+}
+
+MODULE_LICENSE("GPL");
+module_init(fit3_init)
+module_exit(fit3_exit)
diff --git a/drivers/block/paride/friq.c b/drivers/block/paride/friq.c
new file mode 100644
index 000000000..4f2ba2446
--- /dev/null
+++ b/drivers/block/paride/friq.c
@@ -0,0 +1,276 @@
+/*
+ friq.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License
+
+ friq.c is a low-level protocol driver for the Freecom "IQ"
+ parallel port IDE adapter. Early versions of this adapter
+ use the 'frpw' protocol.
+
+ Freecom uses this adapter in a battery powered external
+ CD-ROM drive. It is also used in LS-120 drives by
+ Maxell and Panasonic, and other devices.
+
+ The battery powered drive requires software support to
+ control the power to the drive. This module enables the
+ drive power when the high level driver (pcd) is loaded
+ and disables it when the module is unloaded. Note, if
+ the friq module is built in to the kernel, the power
+ will never be switched off, so other means should be
+ used to conserve battery power.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.12.20 Added support for soft power switch
+*/
+
+#define FRIQ_VERSION "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define CMD(x) w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
+ w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
+
+#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x08, 0x10 };
+
+static int friq_read_regr( PIA *pi, int cont, int regr )
+
+{ int h,l,r;
+
+ r = regr + cont_map[cont];
+
+ CMD(r);
+ w2(6); l = r1();
+ w2(4); h = r1();
+ w2(4);
+
+ return j44(l,h);
+
+}
+
+static void friq_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ CMD(r);
+ w0(val);
+ w2(5);w2(7);w2(5);w2(4);
+}
+
+static void friq_read_block_int( PIA *pi, char * buf, int count, int regr )
+
+{ int h, l, k, ph;
+
+ switch(pi->mode) {
+
+ case 0: CMD(regr);
+ for (k=0;k<count;k++) {
+ w2(6); l = r1();
+ w2(4); h = r1();
+ buf[k] = j44(l,h);
+ }
+ w2(4);
+ break;
+
+ case 1: ph = 2;
+ CMD(regr+0xc0);
+ w0(0xff);
+ for (k=0;k<count;k++) {
+ w2(0xa4 + ph);
+ buf[k] = r0();
+ ph = 2 - ph;
+ }
+ w2(0xac); w2(0xa4); w2(4);
+ break;
+
+ case 2: CMD(regr+0x80);
+ for (k=0;k<count-2;k++) buf[k] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 3: CMD(regr+0x80);
+ for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 4: CMD(regr+0x80);
+ for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+ buf[count-4] = r4();
+ buf[count-3] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ }
+}
+
+static void friq_read_block( PIA *pi, char * buf, int count)
+
+{ friq_read_block_int(pi,buf,count,0x08);
+}
+
+static void friq_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch(pi->mode) {
+
+ case 0:
+ case 1: CMD(8); w2(5);
+ for (k=0;k<count;k++) {
+ w0(buf[k]);
+ w2(7);w2(5);
+ }
+ w2(4);
+ break;
+
+ case 2: CMD(0xc8); w2(5);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(4);
+ break;
+
+ case 3: CMD(0xc8); w2(5);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ w2(4);
+ break;
+
+ case 4: CMD(0xc8); w2(5);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ w2(4);
+ break;
+ }
+}
+
+static void friq_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4);
+}
+
+static void friq_disconnect ( PIA *pi )
+
+{ CMD(0x20);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static int friq_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int j, k, r;
+ int e[2] = {0,0};
+
+ pi->saved_r0 = r0();
+ w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
+ udelay(500);
+ w0(pi->saved_r0);
+
+ friq_connect(pi);
+ for (j=0;j<2;j++) {
+ friq_write_regr(pi,0,6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ friq_write_regr(pi,0,2,k^0xaa);
+ friq_write_regr(pi,0,3,k^0x55);
+ if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
+ }
+ }
+ friq_disconnect(pi);
+
+ friq_connect(pi);
+ friq_read_block_int(pi,scratch,512,0x10);
+ r = 0;
+ for (k=0;k<128;k++) if (scratch[k] != k) r++;
+ friq_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+ pi->device,pi->port,pi->mode,e[0],e[1],r);
+ }
+
+ return (r || (e[0] && e[1]));
+}
+
+
+static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[6] = {"4-bit","8-bit",
+ "EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device,
+ FRIQ_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+ pi->private = 1;
+ friq_connect(pi);
+ CMD(0x9e); /* disable sleep timer */
+ friq_disconnect(pi);
+
+}
+
+static void friq_release_proto( PIA *pi)
+{
+ if (pi->private) { /* turn off the power */
+ friq_connect(pi);
+ CMD(0x1d); CMD(0x1e);
+ friq_disconnect(pi);
+ pi->private = 0;
+ }
+}
+
+static struct pi_protocol friq = {
+ .owner = THIS_MODULE,
+ .name = "friq",
+ .max_mode = 5,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = friq_write_regr,
+ .read_regr = friq_read_regr,
+ .write_block = friq_write_block,
+ .read_block = friq_read_block,
+ .connect = friq_connect,
+ .disconnect = friq_disconnect,
+ .test_proto = friq_test_proto,
+ .log_adapter = friq_log_adapter,
+ .release_proto = friq_release_proto,
+};
+
+static int __init friq_init(void)
+{
+ return paride_register(&friq);
+}
+
+static void __exit friq_exit(void)
+{
+ paride_unregister(&friq);
+}
+
+MODULE_LICENSE("GPL");
+module_init(friq_init)
+module_exit(friq_exit)
diff --git a/drivers/block/paride/frpw.c b/drivers/block/paride/frpw.c
new file mode 100644
index 000000000..c3cde3646
--- /dev/null
+++ b/drivers/block/paride/frpw.c
@@ -0,0 +1,313 @@
+/*
+ frpw.c (c) 1996-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License
+
+ frpw.c is a low-level protocol driver for the Freecom "Power"
+ parallel port IDE adapter.
+
+ Some applications of this adapter may require a "printer" reset
+ prior to loading the driver. This can be done by loading and
+ unloading the "lp" driver, or it can be done by this driver
+ if you define FRPW_HARD_RESET. The latter is not recommended
+ as it may upset devices on other ports.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+ fix chip detect
+ added EPP-16 and EPP-32
+ 1.02 GRG 1998.09.23 added hard reset to initialisation process
+ 1.03 GRG 1998.12.14 made hard reset conditional
+
+*/
+
+#define FRPW_VERSION "1.03"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
+#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x08, 0x10 };
+
+static int frpw_read_regr( PIA *pi, int cont, int regr )
+
+{ int h,l,r;
+
+ r = regr + cont_map[cont];
+
+ w2(4);
+ w0(r); cec4;
+ w2(6); l = r1();
+ w2(4); h = r1();
+ w2(4);
+
+ return j44(l,h);
+
+}
+
+static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ w2(4); w0(r); cec4;
+ w0(val);
+ w2(5);w2(7);w2(5);w2(4);
+}
+
+static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
+
+{ int h, l, k, ph;
+
+ switch(pi->mode) {
+
+ case 0: w2(4); w0(regr); cec4;
+ for (k=0;k<count;k++) {
+ w2(6); l = r1();
+ w2(4); h = r1();
+ buf[k] = j44(l,h);
+ }
+ w2(4);
+ break;
+
+ case 1: ph = 2;
+ w2(4); w0(regr + 0xc0); cec4;
+ w0(0xff);
+ for (k=0;k<count;k++) {
+ w2(0xa4 + ph);
+ buf[k] = r0();
+ ph = 2 - ph;
+ }
+ w2(0xac); w2(0xa4); w2(4);
+ break;
+
+ case 2: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(0xac); w2(0xa4);
+ w2(4);
+ break;
+
+ case 3: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<count-2;k++) buf[k] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 4: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 5: w2(4); w0(regr + 0x80); cec4;
+ for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+ buf[count-4] = r4();
+ buf[count-3] = r4();
+ w2(0xac); w2(0xa4);
+ buf[count-2] = r4();
+ buf[count-1] = r4();
+ w2(4);
+ break;
+
+ }
+}
+
+static void frpw_read_block( PIA *pi, char * buf, int count)
+
+{ frpw_read_block_int(pi,buf,count,0x08);
+}
+
+static void frpw_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch(pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w2(4); w0(8); cec4; w2(5);
+ for (k=0;k<count;k++) {
+ w0(buf[k]);
+ w2(7);w2(5);
+ }
+ w2(4);
+ break;
+
+ case 3: w2(4); w0(0xc8); cec4; w2(5);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(4);
+ break;
+
+ case 4: w2(4); w0(0xc8); cec4; w2(5);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ w2(4);
+ break;
+
+ case 5: w2(4); w0(0xc8); cec4; w2(5);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ w2(4);
+ break;
+ }
+}
+
+static void frpw_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4);
+}
+
+static void frpw_disconnect ( PIA *pi )
+
+{ w2(4); w0(0x20); cec4;
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+/* Stub logic to see if PNP string is available - used to distinguish
+ between the Xilinx and ASIC implementations of the Freecom adapter.
+*/
+
+static int frpw_test_pnp ( PIA *pi )
+
+/* returns chip_type: 0 = Xilinx, 1 = ASIC */
+
+{ int olddelay, a, b;
+
+#ifdef FRPW_HARD_RESET
+ w0(0); w2(8); udelay(50); w2(0xc); /* parallel bus reset */
+ mdelay(1500);
+#endif
+
+ olddelay = pi->delay;
+ pi->delay = 10;
+
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ w2(4); w0(4); w2(6); w2(7);
+ a = r1() & 0xff; w2(4); b = r1() & 0xff;
+ w2(0xc); w2(0xe); w2(4);
+
+ pi->delay = olddelay;
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+
+ return ((~a&0x40) && (b&0x40));
+}
+
+/* We use the pi->private to remember the result of the PNP test.
+ To make this work, private = port*2 + chip. Yes, I know it's
+ a hack :-(
+*/
+
+static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int j, k, r;
+ int e[2] = {0,0};
+
+ if ((pi->private>>1) != pi->port)
+ pi->private = frpw_test_pnp(pi) + 2*pi->port;
+
+ if (((pi->private%2) == 0) && (pi->mode > 2)) {
+ if (verbose)
+ printk("%s: frpw: Xilinx does not support mode %d\n",
+ pi->device, pi->mode);
+ return 1;
+ }
+
+ if (((pi->private%2) == 1) && (pi->mode == 2)) {
+ if (verbose)
+ printk("%s: frpw: ASIC does not support mode 2\n",
+ pi->device);
+ return 1;
+ }
+
+ frpw_connect(pi);
+ for (j=0;j<2;j++) {
+ frpw_write_regr(pi,0,6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ frpw_write_regr(pi,0,2,k^0xaa);
+ frpw_write_regr(pi,0,3,k^0x55);
+ if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
+ }
+ }
+ frpw_disconnect(pi);
+
+ frpw_connect(pi);
+ frpw_read_block_int(pi,scratch,512,0x10);
+ r = 0;
+ for (k=0;k<128;k++) if (scratch[k] != k) r++;
+ frpw_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+ pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
+ }
+
+ return (r || (e[0] && e[1]));
+}
+
+
+static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[6] = {"4-bit","8-bit","EPP",
+ "EPP-8","EPP-16","EPP-32"};
+
+ printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
+ FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol frpw = {
+ .owner = THIS_MODULE,
+ .name = "frpw",
+ .max_mode = 6,
+ .epp_first = 2,
+ .default_delay = 2,
+ .max_units = 1,
+ .write_regr = frpw_write_regr,
+ .read_regr = frpw_read_regr,
+ .write_block = frpw_write_block,
+ .read_block = frpw_read_block,
+ .connect = frpw_connect,
+ .disconnect = frpw_disconnect,
+ .test_proto = frpw_test_proto,
+ .log_adapter = frpw_log_adapter,
+};
+
+static int __init frpw_init(void)
+{
+ return paride_register(&frpw);
+}
+
+static void __exit frpw_exit(void)
+{
+ paride_unregister(&frpw);
+}
+
+MODULE_LICENSE("GPL");
+module_init(frpw_init)
+module_exit(frpw_exit)
diff --git a/drivers/block/paride/kbic.c b/drivers/block/paride/kbic.c
new file mode 100644
index 000000000..35999c415
--- /dev/null
+++ b/drivers/block/paride/kbic.c
@@ -0,0 +1,305 @@
+/*
+ kbic.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is a low-level driver for the KBIC-951A and KBIC-971A
+ parallel to IDE adapter chips from KingByte Information Systems.
+
+ The chips are almost identical, however, the wakeup code
+ required for the 971A interferes with the correct operation of
+ the 951A, so this driver registers itself twice, once for
+ each chip.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define KBIC_VERSION "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define r12w() (delay_p,inw(pi->port+1)&0xffff)
+
+#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88)
+#define j53(w) (((w>>3)&0x1f)|((w>>4)&0xe0))
+
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x80, 0x40 };
+
+static int kbic_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, s;
+
+ s = cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
+ a = r1(); w0(0x28); b = r1(); w2(4);
+ return j44(a,b);
+
+ case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
+ a = r12w(); w2(4);
+ return j53(a);
+
+ case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
+ a = r0(); w2(4);
+ return a;
+
+ case 3:
+ case 4:
+ case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+ a = r4(); b = r4(); w2(4); w2(0); w2(4);
+ return a;
+
+ }
+ return -1;
+}
+
+static void kbic_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int s;
+
+ s = cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(regr|0x10|s); w2(4); w2(6); w2(4);
+ w0(val); w2(5); w2(4);
+ break;
+
+ case 3:
+ case 4:
+ case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+ w4(val); w4(val);
+ w2(4); w2(0); w2(4);
+ break;
+
+ }
+}
+
+static void k951_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4);
+}
+
+static void k951_disconnect ( PIA *pi )
+
+{ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+#define CCP(x) w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
+ w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
+
+static void k971_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ CCP(0x20);
+ w2(4);
+}
+
+static void k971_disconnect ( PIA *pi )
+
+{ CCP(0x30);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+/* counts must be congruent to 0 MOD 4, but all known applications
+ have this property.
+*/
+
+static void kbic_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b;
+
+ switch (pi->mode) {
+
+ case 0: w0(0x98); w2(4); w2(6); w2(4);
+ for (k=0;k<count/2;k++) {
+ w2(1); w0(8); a = r1();
+ w0(0x28); b = r1();
+ buf[2*k] = j44(a,b);
+ w2(5); b = r1();
+ w0(8); a = r1();
+ buf[2*k+1] = j44(a,b);
+ w2(4);
+ }
+ break;
+
+ case 1: w0(0xb8); w2(4); w2(6); w2(4);
+ for (k=0;k<count/4;k++) {
+ w0(0xb8);
+ w2(4); w2(5);
+ w0(8); buf[4*k] = j53(r12w());
+ w0(0xb8); buf[4*k+1] = j53(r12w());
+ w2(4); w2(5);
+ buf[4*k+3] = j53(r12w());
+ w0(8); buf[4*k+2] = j53(r12w());
+ }
+ w2(4);
+ break;
+
+ case 2: w0(0x88); w2(4); w2(6); w2(4);
+ for (k=0;k<count/2;k++) {
+ w2(0xa0); w2(0xa1); buf[2*k] = r0();
+ w2(0xa5); buf[2*k+1] = r0();
+ }
+ w2(4);
+ break;
+
+ case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(4); w2(0); w2(4);
+ break;
+
+ case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+ for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+ w2(4); w2(0); w2(4);
+ break;
+
+ case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+ for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+ w2(4); w2(0); w2(4);
+ break;
+
+
+ }
+}
+
+static void kbic_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(0x90); w2(4); w2(6); w2(4);
+ for(k=0;k<count/2;k++) {
+ w0(buf[2*k+1]); w2(0); w2(4);
+ w0(buf[2*k]); w2(5); w2(4);
+ }
+ break;
+
+ case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+ for(k=0;k<count/2;k++) {
+ w4(buf[2*k+1]);
+ w4(buf[2*k]);
+ }
+ w2(4); w2(0); w2(4);
+ break;
+
+ case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+ for(k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
+ w2(4); w2(0); w2(4);
+ break;
+
+ case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+ for(k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
+ w2(4); w2(0); w2(4);
+ break;
+
+ }
+
+}
+
+static void kbic_log_adapter( PIA *pi, char * scratch,
+ int verbose, char * chip )
+
+{ char *mode_string[6] = {"4-bit","5/3","8-bit",
+ "EPP-8","EPP_16","EPP-32"};
+
+ printk("%s: kbic %s, KingByte %s at 0x%x, ",
+ pi->device,KBIC_VERSION,chip,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static void k951_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ kbic_log_adapter(pi,scratch,verbose,"KBIC-951A");
+}
+
+static void k971_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ kbic_log_adapter(pi,scratch,verbose,"KBIC-971A");
+}
+
+static struct pi_protocol k951 = {
+ .owner = THIS_MODULE,
+ .name = "k951",
+ .max_mode = 6,
+ .epp_first = 3,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = kbic_write_regr,
+ .read_regr = kbic_read_regr,
+ .write_block = kbic_write_block,
+ .read_block = kbic_read_block,
+ .connect = k951_connect,
+ .disconnect = k951_disconnect,
+ .log_adapter = k951_log_adapter,
+};
+
+static struct pi_protocol k971 = {
+ .owner = THIS_MODULE,
+ .name = "k971",
+ .max_mode = 6,
+ .epp_first = 3,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = kbic_write_regr,
+ .read_regr = kbic_read_regr,
+ .write_block = kbic_write_block,
+ .read_block = kbic_read_block,
+ .connect = k971_connect,
+ .disconnect = k971_disconnect,
+ .log_adapter = k971_log_adapter,
+};
+
+static int __init kbic_init(void)
+{
+ int rv;
+
+ rv = paride_register(&k951);
+ if (rv < 0)
+ return rv;
+ rv = paride_register(&k971);
+ if (rv < 0)
+ paride_unregister(&k951);
+ return rv;
+}
+
+static void __exit kbic_exit(void)
+{
+ paride_unregister(&k951);
+ paride_unregister(&k971);
+}
+
+MODULE_LICENSE("GPL");
+module_init(kbic_init)
+module_exit(kbic_exit)
diff --git a/drivers/block/paride/ktti.c b/drivers/block/paride/ktti.c
new file mode 100644
index 000000000..117ab0e8c
--- /dev/null
+++ b/drivers/block/paride/ktti.c
@@ -0,0 +1,128 @@
+/*
+ ktti.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ ktti.c is a low-level protocol driver for the KT Technology
+ parallel port adapter. This adapter is used in the "PHd"
+ portable hard-drives. As far as I can tell, this device
+ supports 4-bit mode _only_.
+
+*/
+
+#define KTTI_VERSION "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int cont_map[2] = { 0x10, 0x08 };
+
+static void ktti_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ w0(r); w2(0xb); w2(0xa); w2(3); w2(6);
+ w0(val); w2(3); w0(0); w2(6); w2(0xb);
+}
+
+static int ktti_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ r = regr + cont_map[cont];
+
+ w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
+ a = r1(); w2(0xc); b = r1(); w2(9); w2(0xc); w2(9);
+ return j44(a,b);
+
+}
+
+static void ktti_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b;
+
+ for (k=0;k<count/2;k++) {
+ w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
+ a = r1(); w2(0xc); b = r1(); w2(9);
+ buf[2*k] = j44(a,b);
+ a = r1(); w2(0xc); b = r1(); w2(9);
+ buf[2*k+1] = j44(a,b);
+ }
+}
+
+static void ktti_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ for (k=0;k<count/2;k++) {
+ w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6);
+ w0(buf[2*k]); w2(3);
+ w0(buf[2*k+1]); w2(6);
+ w2(0xb);
+ }
+}
+
+static void ktti_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(0xb); w2(0xa); w0(0); w2(3); w2(6);
+}
+
+static void ktti_disconnect ( PIA *pi )
+
+{ w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n",
+ pi->device,KTTI_VERSION,pi->port,pi->delay);
+
+}
+
+static struct pi_protocol ktti = {
+ .owner = THIS_MODULE,
+ .name = "ktti",
+ .max_mode = 1,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = ktti_write_regr,
+ .read_regr = ktti_read_regr,
+ .write_block = ktti_write_block,
+ .read_block = ktti_read_block,
+ .connect = ktti_connect,
+ .disconnect = ktti_disconnect,
+ .log_adapter = ktti_log_adapter,
+};
+
+static int __init ktti_init(void)
+{
+ return paride_register(&ktti);
+}
+
+static void __exit ktti_exit(void)
+{
+ paride_unregister(&ktti);
+}
+
+MODULE_LICENSE("GPL");
+module_init(ktti_init)
+module_exit(ktti_exit)
diff --git a/drivers/block/paride/mkd b/drivers/block/paride/mkd
new file mode 100644
index 000000000..6d0d80247
--- /dev/null
+++ b/drivers/block/paride/mkd
@@ -0,0 +1,31 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# mkd -- a script to create the device special files for the PARIDE subsystem
+#
+# block devices: pd (45), pcd (46), pf (47)
+# character devices: pt (96), pg (97)
+#
+function mkdev {
+ mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
+}
+#
+function pd {
+ D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
+ mkdev pd$D b 45 $[ $1 * 16 ]
+ for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+ do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
+ done
+}
+#
+cd /dev
+#
+for u in 0 1 2 3 ; do pd $u ; done
+for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
+for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done
+for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done
+for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
+for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done
+#
+# end of mkd
+
diff --git a/drivers/block/paride/on20.c b/drivers/block/paride/on20.c
new file mode 100644
index 000000000..0173697a1
--- /dev/null
+++ b/drivers/block/paride/on20.c
@@ -0,0 +1,153 @@
+/*
+ on20.c (c) 1996-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ on20.c is a low-level protocol driver for the
+ Onspec 90c20 parallel to IDE adapter.
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define ON20_VERSION "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define op(f) w2(4);w0(f);w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
+#define vl(v) w2(4);w0(v);w2(5);w2(7);w2(5);w2(4);
+
+#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int on20_read_regr( PIA *pi, int cont, int regr )
+
+{ int h,l, r ;
+
+ r = (regr<<2) + 1 + cont;
+
+ op(1); vl(r); op(0);
+
+ switch (pi->mode) {
+
+ case 0: w2(4); w2(6); l = r1();
+ w2(4); w2(6); h = r1();
+ w2(4); w2(6); w2(4); w2(6); w2(4);
+ return j44(l,h);
+
+ case 1: w2(4); w2(0x26); r = r0();
+ w2(4); w2(0x26); w2(4);
+ return r;
+
+ }
+ return -1;
+}
+
+static void on20_write_regr( PIA *pi, int cont, int regr, int val )
+
+{ int r;
+
+ r = (regr<<2) + 1 + cont;
+
+ op(1); vl(r);
+ op(0); vl(val);
+ op(0); vl(val);
+}
+
+static void on20_connect ( PIA *pi)
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ w2(4);w0(0);w2(0xc);w2(4);w2(6);w2(4);w2(6);w2(4);
+ if (pi->mode) { op(2); vl(8); op(2); vl(9); }
+ else { op(2); vl(0); op(2); vl(8); }
+}
+
+static void on20_disconnect ( PIA *pi )
+
+{ w2(4);w0(7);w2(4);w2(0xc);w2(4);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static void on20_read_block( PIA *pi, char * buf, int count )
+
+{ int k, l, h;
+
+ op(1); vl(1); op(0);
+
+ for (k=0;k<count;k++)
+ if (pi->mode) {
+ w2(4); w2(0x26); buf[k] = r0();
+ } else {
+ w2(6); l = r1(); w2(4);
+ w2(6); h = r1(); w2(4);
+ buf[k] = j44(l,h);
+ }
+ w2(4);
+}
+
+static void on20_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ op(1); vl(1); op(0);
+
+ for (k=0;k<count;k++) { w2(5); w0(buf[k]); w2(7); }
+ w2(4);
+}
+
+static void on20_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[2] = {"4-bit","8-bit"};
+
+ printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ",
+ pi->device,ON20_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol on20 = {
+ .owner = THIS_MODULE,
+ .name = "on20",
+ .max_mode = 2,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = on20_write_regr,
+ .read_regr = on20_read_regr,
+ .write_block = on20_write_block,
+ .read_block = on20_read_block,
+ .connect = on20_connect,
+ .disconnect = on20_disconnect,
+ .log_adapter = on20_log_adapter,
+};
+
+static int __init on20_init(void)
+{
+ return paride_register(&on20);
+}
+
+static void __exit on20_exit(void)
+{
+ paride_unregister(&on20);
+}
+
+MODULE_LICENSE("GPL");
+module_init(on20_init)
+module_exit(on20_exit)
diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c
new file mode 100644
index 000000000..95ba25692
--- /dev/null
+++ b/drivers/block/paride/on26.c
@@ -0,0 +1,319 @@
+/*
+ on26.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ on26.c is a low-level protocol driver for the
+ OnSpec 90c26 parallel to IDE adapter chip.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+ 1.02 GRG 1998.09.23 updates for the -E rev chip
+ 1.03 GRG 1998.12.14 fix for slave drives
+ 1.04 GRG 1998.12.20 yet another bug fix
+
+*/
+
+#define ON26_VERSION "1.04"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes: 0 nybble reads, 8-bit writes
+ 1 8-bit reads and writes
+ 2 8-bit EPP mode
+ 3 EPP-16
+ 4 EPP-32
+*/
+
+#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
+
+#define P1 w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
+#define P2 w2(5);w2(7);w2(5);w2(4);
+
+/* cont = 0 - access the IDE register file
+ cont = 1 - access the IDE command set
+*/
+
+static int on26_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ r = (regr<<2) + 1 + cont;
+
+ switch (pi->mode) {
+
+ case 0: w0(1); P1; w0(r); P2; w0(0); P1;
+ w2(6); a = r1(); w2(4);
+ w2(6); b = r1(); w2(4);
+ w2(6); w2(4); w2(6); w2(4);
+ return j44(a,b);
+
+ case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+ w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
+ return a;
+
+ case 2:
+ case 3:
+ case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+ w3(0); w3(0); w2(0x24); a = r4(); w2(4);
+ w2(0x24); (void)r4(); w2(4);
+ return a;
+
+ }
+ return -1;
+}
+
+static void on26_write_regr( PIA *pi, int cont, int regr, int val )
+
+{ int r;
+
+ r = (regr<<2) + 1 + cont;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+ w0(val); P2; w0(val); P2;
+ break;
+
+ case 2:
+ case 3:
+ case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+ w3(0); w3(0);
+ w2(5); w4(val); w2(4);
+ w2(5); w4(val); w2(4);
+ break;
+ }
+}
+
+#define CCP(x) w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
+ w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+
+static void on26_connect ( PIA *pi )
+
+{ int x;
+
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ CCP(0x20);
+ x = 8; if (pi->mode) x = 9;
+
+ w0(2); P1; w0(8); P2;
+ w0(2); P1; w0(x); P2;
+}
+
+static void on26_disconnect ( PIA *pi )
+
+{ if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
+ else { w0(4); P1; w0(4); P1; }
+ CCP(0x30);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+#define RESET_WAIT 200
+
+static int on26_test_port( PIA *pi) /* hard reset */
+
+{ int i, m, d, x=0, y=0;
+
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ d = pi->delay;
+ m = pi->mode;
+ pi->delay = 5;
+ pi->mode = 0;
+
+ w2(0xc);
+
+ CCP(0x30); CCP(0);
+
+ w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
+ i = ((r1() & 0xf0) << 4); w0(0x87);
+ i |= (r1() & 0xf0); w0(0x78);
+ w0(0x20);w2(4);w2(5);
+ i |= ((r1() & 0xf0) >> 4);
+ w2(4);w0(0xff);
+
+ if (i == 0xb5f) {
+
+ w0(2); P1; w0(0); P2;
+ w0(3); P1; w0(0); P2;
+ w0(2); P1; w0(8); P2; udelay(100);
+ w0(2); P1; w0(0xa); P2; udelay(100);
+ w0(2); P1; w0(8); P2; udelay(1000);
+
+ on26_write_regr(pi,0,6,0xa0);
+
+ for (i=0;i<RESET_WAIT;i++) {
+ on26_write_regr(pi,0,6,0xa0);
+ x = on26_read_regr(pi,0,7);
+ on26_write_regr(pi,0,6,0xb0);
+ y = on26_read_regr(pi,0,7);
+ if (!((x&0x80)||(y&0x80))) break;
+ mdelay(100);
+ }
+
+ if (i == RESET_WAIT)
+ printk("on26: Device reset failed (%x,%x)\n",x,y);
+
+ w0(4); P1; w0(4); P1;
+ }
+
+ CCP(0x30);
+
+ pi->delay = d;
+ pi->mode = m;
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+
+ return 5;
+}
+
+
+static void on26_read_block( PIA *pi, char * buf, int count )
+
+{ int k, a, b;
+
+ switch (pi->mode) {
+
+ case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
+ udelay(10);
+ for (k=0;k<count;k++) {
+ w2(6); a = r1();
+ w2(4); b = r1();
+ buf[k] = j44(a,b);
+ }
+ w0(2); P1; w0(8); P2;
+ break;
+
+ case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+ udelay(10);
+ for (k=0;k<count/2;k++) {
+ w2(0x26); buf[2*k] = r0();
+ w2(0x24); buf[2*k+1] = r0();
+ }
+ w0(2); P1; w0(9); P2;
+ break;
+
+ case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0x24);
+ udelay(10);
+ for (k=0;k<count;k++) buf[k] = r4();
+ w2(4);
+ break;
+
+ case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0x24);
+ udelay(10);
+ for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+ w2(4);
+ break;
+
+ case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0x24);
+ udelay(10);
+ for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+ w2(4);
+ break;
+
+ }
+}
+
+static void on26_write_block( PIA *pi, char * buf, int count )
+
+{ int k;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1: w0(1); P1; w0(1); P2;
+ w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
+ udelay(10);
+ for (k=0;k<count/2;k++) {
+ w2(5); w0(buf[2*k]);
+ w2(7); w0(buf[2*k+1]);
+ }
+ w2(5); w2(4);
+ w0(2); P1; w0(8+pi->mode); P2;
+ break;
+
+ case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0xc5);
+ udelay(10);
+ for (k=0;k<count;k++) w4(buf[k]);
+ w2(0xc4);
+ break;
+
+ case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0xc5);
+ udelay(10);
+ for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+ w2(0xc4);
+ break;
+
+ case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
+ w3(0); w3(0); w2(0xc5);
+ udelay(10);
+ for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+ w2(0xc4);
+ break;
+
+ }
+
+}
+
+static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
+ "EPP-16","EPP-32"};
+
+ printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
+ pi->device,ON26_VERSION,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol on26 = {
+ .owner = THIS_MODULE,
+ .name = "on26",
+ .max_mode = 5,
+ .epp_first = 2,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = on26_write_regr,
+ .read_regr = on26_read_regr,
+ .write_block = on26_write_block,
+ .read_block = on26_read_block,
+ .connect = on26_connect,
+ .disconnect = on26_disconnect,
+ .test_port = on26_test_port,
+ .log_adapter = on26_log_adapter,
+};
+
+static int __init on26_init(void)
+{
+ return paride_register(&on26);
+}
+
+static void __exit on26_exit(void)
+{
+ paride_unregister(&on26);
+}
+
+MODULE_LICENSE("GPL");
+module_init(on26_init)
+module_exit(on26_exit)
diff --git a/drivers/block/paride/paride.c b/drivers/block/paride/paride.c
new file mode 100644
index 000000000..0e287993b
--- /dev/null
+++ b/drivers/block/paride/paride.c
@@ -0,0 +1,479 @@
+/*
+ paride.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is the base module for the family of device drivers
+ that support parallel port IDE devices.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.03 Use spinlocks
+ 1.02 GRG 1998.05.05 init_proto, release_proto, ktti
+ 1.03 GRG 1998.08.15 eliminate compiler warning
+ 1.04 GRG 1998.11.28 added support for FRIQ
+ 1.05 TMW 2000.06.06 use parport_find_number instead of
+ parport_enumerate
+ 1.06 TMW 2001.03.26 more sane parport-or-not resource management
+*/
+
+#define PI_VERSION "1.06"
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sched.h> /* TASK_* */
+#include <linux/parport.h>
+#include <linux/slab.h>
+
+#include "paride.h"
+
+MODULE_LICENSE("GPL");
+
+#define MAX_PROTOS 32
+
+static struct pi_protocol *protocols[MAX_PROTOS];
+
+static DEFINE_SPINLOCK(pi_spinlock);
+
+void pi_write_regr(PIA * pi, int cont, int regr, int val)
+{
+ pi->proto->write_regr(pi, cont, regr, val);
+}
+
+EXPORT_SYMBOL(pi_write_regr);
+
+int pi_read_regr(PIA * pi, int cont, int regr)
+{
+ return pi->proto->read_regr(pi, cont, regr);
+}
+
+EXPORT_SYMBOL(pi_read_regr);
+
+void pi_write_block(PIA * pi, char *buf, int count)
+{
+ pi->proto->write_block(pi, buf, count);
+}
+
+EXPORT_SYMBOL(pi_write_block);
+
+void pi_read_block(PIA * pi, char *buf, int count)
+{
+ pi->proto->read_block(pi, buf, count);
+}
+
+EXPORT_SYMBOL(pi_read_block);
+
+static void pi_wake_up(void *p)
+{
+ PIA *pi = (PIA *) p;
+ unsigned long flags;
+ void (*cont) (void) = NULL;
+
+ spin_lock_irqsave(&pi_spinlock, flags);
+
+ if (pi->claim_cont && !parport_claim(pi->pardev)) {
+ cont = pi->claim_cont;
+ pi->claim_cont = NULL;
+ pi->claimed = 1;
+ }
+
+ spin_unlock_irqrestore(&pi_spinlock, flags);
+
+ wake_up(&(pi->parq));
+
+ if (cont)
+ cont();
+}
+
+int pi_schedule_claimed(PIA * pi, void (*cont) (void))
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pi_spinlock, flags);
+ if (pi->pardev && parport_claim(pi->pardev)) {
+ pi->claim_cont = cont;
+ spin_unlock_irqrestore(&pi_spinlock, flags);
+ return 0;
+ }
+ pi->claimed = 1;
+ spin_unlock_irqrestore(&pi_spinlock, flags);
+ return 1;
+}
+EXPORT_SYMBOL(pi_schedule_claimed);
+
+void pi_do_claimed(PIA * pi, void (*cont) (void))
+{
+ if (pi_schedule_claimed(pi, cont))
+ cont();
+}
+
+EXPORT_SYMBOL(pi_do_claimed);
+
+static void pi_claim(PIA * pi)
+{
+ if (pi->claimed)
+ return;
+ pi->claimed = 1;
+ if (pi->pardev)
+ wait_event(pi->parq,
+ !parport_claim((struct pardevice *) pi->pardev));
+}
+
+static void pi_unclaim(PIA * pi)
+{
+ pi->claimed = 0;
+ if (pi->pardev)
+ parport_release((struct pardevice *) (pi->pardev));
+}
+
+void pi_connect(PIA * pi)
+{
+ pi_claim(pi);
+ pi->proto->connect(pi);
+}
+
+EXPORT_SYMBOL(pi_connect);
+
+void pi_disconnect(PIA * pi)
+{
+ pi->proto->disconnect(pi);
+ pi_unclaim(pi);
+}
+
+EXPORT_SYMBOL(pi_disconnect);
+
+static void pi_unregister_parport(PIA * pi)
+{
+ if (pi->pardev) {
+ parport_unregister_device((struct pardevice *) (pi->pardev));
+ pi->pardev = NULL;
+ }
+}
+
+void pi_release(PIA * pi)
+{
+ pi_unregister_parport(pi);
+ if (pi->proto->release_proto)
+ pi->proto->release_proto(pi);
+ module_put(pi->proto->owner);
+}
+
+EXPORT_SYMBOL(pi_release);
+
+static int default_test_proto(PIA * pi, char *scratch, int verbose)
+{
+ int j, k;
+ int e[2] = { 0, 0 };
+
+ pi->proto->connect(pi);
+
+ for (j = 0; j < 2; j++) {
+ pi_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
+ for (k = 0; k < 256; k++) {
+ pi_write_regr(pi, 0, 2, k ^ 0xaa);
+ pi_write_regr(pi, 0, 3, k ^ 0x55);
+ if (pi_read_regr(pi, 0, 2) != (k ^ 0xaa))
+ e[j]++;
+ }
+ }
+ pi->proto->disconnect(pi);
+
+ if (verbose)
+ printk("%s: %s: port 0x%x, mode %d, test=(%d,%d)\n",
+ pi->device, pi->proto->name, pi->port,
+ pi->mode, e[0], e[1]);
+
+ return (e[0] && e[1]); /* not here if both > 0 */
+}
+
+static int pi_test_proto(PIA * pi, char *scratch, int verbose)
+{
+ int res;
+
+ pi_claim(pi);
+ if (pi->proto->test_proto)
+ res = pi->proto->test_proto(pi, scratch, verbose);
+ else
+ res = default_test_proto(pi, scratch, verbose);
+ pi_unclaim(pi);
+
+ return res;
+}
+
+int paride_register(PIP * pr)
+{
+ int k;
+
+ for (k = 0; k < MAX_PROTOS; k++)
+ if (protocols[k] && !strcmp(pr->name, protocols[k]->name)) {
+ printk("paride: %s protocol already registered\n",
+ pr->name);
+ return -1;
+ }
+ k = 0;
+ while ((k < MAX_PROTOS) && (protocols[k]))
+ k++;
+ if (k == MAX_PROTOS) {
+ printk("paride: protocol table full\n");
+ return -1;
+ }
+ protocols[k] = pr;
+ pr->index = k;
+ printk("paride: %s registered as protocol %d\n", pr->name, k);
+ return 0;
+}
+
+EXPORT_SYMBOL(paride_register);
+
+void paride_unregister(PIP * pr)
+{
+ if (!pr)
+ return;
+ if (protocols[pr->index] != pr) {
+ printk("paride: %s not registered\n", pr->name);
+ return;
+ }
+ protocols[pr->index] = NULL;
+}
+
+EXPORT_SYMBOL(paride_unregister);
+
+static int pi_register_parport(PIA *pi, int verbose, int unit)
+{
+ struct parport *port;
+ struct pardev_cb par_cb;
+
+ port = parport_find_base(pi->port);
+ if (!port)
+ return 0;
+ memset(&par_cb, 0, sizeof(par_cb));
+ par_cb.wakeup = pi_wake_up;
+ par_cb.private = (void *)pi;
+ pi->pardev = parport_register_dev_model(port, pi->device, &par_cb,
+ unit);
+ parport_put_port(port);
+ if (!pi->pardev)
+ return 0;
+
+ init_waitqueue_head(&pi->parq);
+
+ if (verbose)
+ printk("%s: 0x%x is %s\n", pi->device, pi->port, port->name);
+
+ pi->parname = (char *) port->name;
+
+ return 1;
+}
+
+static int pi_probe_mode(PIA * pi, int max, char *scratch, int verbose)
+{
+ int best, range;
+
+ if (pi->mode != -1) {
+ if (pi->mode >= max)
+ return 0;
+ range = 3;
+ if (pi->mode >= pi->proto->epp_first)
+ range = 8;
+ if ((range == 8) && (pi->port % 8))
+ return 0;
+ pi->reserved = range;
+ return (!pi_test_proto(pi, scratch, verbose));
+ }
+ best = -1;
+ for (pi->mode = 0; pi->mode < max; pi->mode++) {
+ range = 3;
+ if (pi->mode >= pi->proto->epp_first)
+ range = 8;
+ if ((range == 8) && (pi->port % 8))
+ break;
+ pi->reserved = range;
+ if (!pi_test_proto(pi, scratch, verbose))
+ best = pi->mode;
+ }
+ pi->mode = best;
+ return (best > -1);
+}
+
+static int pi_probe_unit(PIA * pi, int unit, char *scratch, int verbose)
+{
+ int max, s, e;
+
+ s = unit;
+ e = s + 1;
+
+ if (s == -1) {
+ s = 0;
+ e = pi->proto->max_units;
+ }
+
+ if (!pi_register_parport(pi, verbose, s))
+ return 0;
+
+ if (pi->proto->test_port) {
+ pi_claim(pi);
+ max = pi->proto->test_port(pi);
+ pi_unclaim(pi);
+ } else
+ max = pi->proto->max_mode;
+
+ if (pi->proto->probe_unit) {
+ pi_claim(pi);
+ for (pi->unit = s; pi->unit < e; pi->unit++)
+ if (pi->proto->probe_unit(pi)) {
+ pi_unclaim(pi);
+ if (pi_probe_mode(pi, max, scratch, verbose))
+ return 1;
+ pi_unregister_parport(pi);
+ return 0;
+ }
+ pi_unclaim(pi);
+ pi_unregister_parport(pi);
+ return 0;
+ }
+
+ if (!pi_probe_mode(pi, max, scratch, verbose)) {
+ pi_unregister_parport(pi);
+ return 0;
+ }
+ return 1;
+
+}
+
+int pi_init(PIA * pi, int autoprobe, int port, int mode,
+ int unit, int protocol, int delay, char *scratch,
+ int devtype, int verbose, char *device)
+{
+ int p, k, s, e;
+ int lpts[7] = { 0x3bc, 0x378, 0x278, 0x268, 0x27c, 0x26c, 0 };
+
+ s = protocol;
+ e = s + 1;
+
+ if (!protocols[0])
+ request_module("paride_protocol");
+
+ if (autoprobe) {
+ s = 0;
+ e = MAX_PROTOS;
+ } else if ((s < 0) || (s >= MAX_PROTOS) || (port <= 0) ||
+ (!protocols[s]) || (unit < 0) ||
+ (unit >= protocols[s]->max_units)) {
+ printk("%s: Invalid parameters\n", device);
+ return 0;
+ }
+
+ for (p = s; p < e; p++) {
+ struct pi_protocol *proto = protocols[p];
+ if (!proto)
+ continue;
+ /* still racy */
+ if (!try_module_get(proto->owner))
+ continue;
+ pi->proto = proto;
+ pi->private = 0;
+ if (proto->init_proto && proto->init_proto(pi) < 0) {
+ pi->proto = NULL;
+ module_put(proto->owner);
+ continue;
+ }
+ if (delay == -1)
+ pi->delay = pi->proto->default_delay;
+ else
+ pi->delay = delay;
+ pi->devtype = devtype;
+ pi->device = device;
+
+ pi->parname = NULL;
+ pi->pardev = NULL;
+ init_waitqueue_head(&pi->parq);
+ pi->claimed = 0;
+ pi->claim_cont = NULL;
+
+ pi->mode = mode;
+ if (port != -1) {
+ pi->port = port;
+ if (pi_probe_unit(pi, unit, scratch, verbose))
+ break;
+ pi->port = 0;
+ } else {
+ k = 0;
+ while ((pi->port = lpts[k++]))
+ if (pi_probe_unit
+ (pi, unit, scratch, verbose))
+ break;
+ if (pi->port)
+ break;
+ }
+ if (pi->proto->release_proto)
+ pi->proto->release_proto(pi);
+ module_put(proto->owner);
+ }
+
+ if (!pi->port) {
+ if (autoprobe)
+ printk("%s: Autoprobe failed\n", device);
+ else
+ printk("%s: Adapter not found\n", device);
+ return 0;
+ }
+
+ if (pi->parname)
+ printk("%s: Sharing %s at 0x%x\n", pi->device,
+ pi->parname, pi->port);
+
+ pi->proto->log_adapter(pi, scratch, verbose);
+
+ return 1;
+}
+
+EXPORT_SYMBOL(pi_init);
+
+static int pi_probe(struct pardevice *par_dev)
+{
+ struct device_driver *drv = par_dev->dev.driver;
+ int len = strlen(drv->name);
+
+ if (strncmp(par_dev->name, drv->name, len))
+ return -ENODEV;
+
+ return 0;
+}
+
+void *pi_register_driver(char *name)
+{
+ struct parport_driver *parp_drv;
+ int ret;
+
+ parp_drv = kzalloc(sizeof(*parp_drv), GFP_KERNEL);
+ if (!parp_drv)
+ return NULL;
+
+ parp_drv->name = name;
+ parp_drv->probe = pi_probe;
+ parp_drv->devmodel = true;
+
+ ret = parport_register_driver(parp_drv);
+ if (ret) {
+ kfree(parp_drv);
+ return NULL;
+ }
+ return (void *)parp_drv;
+}
+EXPORT_SYMBOL(pi_register_driver);
+
+void pi_unregister_driver(void *_drv)
+{
+ struct parport_driver *drv = _drv;
+
+ parport_unregister_driver(drv);
+ kfree(drv);
+}
+EXPORT_SYMBOL(pi_unregister_driver);
diff --git a/drivers/block/paride/paride.h b/drivers/block/paride/paride.h
new file mode 100644
index 000000000..ddb9e589d
--- /dev/null
+++ b/drivers/block/paride/paride.h
@@ -0,0 +1,172 @@
+#ifndef __DRIVERS_PARIDE_H__
+#define __DRIVERS_PARIDE_H__
+
+/*
+ paride.h (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GPL.
+
+ This file defines the interface between the high-level parallel
+ IDE device drivers (pd, pf, pcd, pt) and the adapter chips.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.05 init_proto, release_proto
+*/
+
+#define PARIDE_H_VERSION "1.01"
+
+/* Some adapters need to know what kind of device they are in
+
+ Values for devtype:
+*/
+
+#define PI_PD 0 /* IDE disk */
+#define PI_PCD 1 /* ATAPI CDrom */
+#define PI_PF 2 /* ATAPI disk */
+#define PI_PT 3 /* ATAPI tape */
+#define PI_PG 4 /* ATAPI generic */
+
+/* The paride module contains no state, instead the drivers allocate
+ a pi_adapter data structure and pass it to paride in every operation.
+
+*/
+
+struct pi_adapter {
+
+ struct pi_protocol *proto; /* adapter protocol */
+ int port; /* base address of parallel port */
+ int mode; /* transfer mode in use */
+ int delay; /* adapter delay setting */
+ int devtype; /* device type: PI_PD etc. */
+ char *device; /* name of driver */
+ int unit; /* unit number for chained adapters */
+ int saved_r0; /* saved port state */
+ int saved_r2; /* saved port state */
+ int reserved; /* number of ports reserved */
+ unsigned long private; /* for protocol module */
+
+ wait_queue_head_t parq; /* semaphore for parport sharing */
+ void *pardev; /* pointer to pardevice */
+ char *parname; /* parport name */
+ int claimed; /* parport has already been claimed */
+ void (*claim_cont)(void); /* continuation for parport wait */
+};
+
+typedef struct pi_adapter PIA;
+
+/* functions exported by paride to the high level drivers */
+
+extern int pi_init(PIA *pi,
+ int autoprobe, /* 1 to autoprobe */
+ int port, /* base port address */
+ int mode, /* -1 for autoprobe */
+ int unit, /* unit number, if supported */
+ int protocol, /* protocol to use */
+ int delay, /* -1 to use adapter specific default */
+ char * scratch, /* address of 512 byte buffer */
+ int devtype, /* device type: PI_PD, PI_PCD, etc ... */
+ int verbose, /* log verbose data while probing */
+ char *device /* name of the driver */
+ ); /* returns 0 on failure, 1 on success */
+
+extern void pi_release(PIA *pi);
+
+/* registers are addressed as (cont,regr)
+
+ cont: 0 for command register file, 1 for control register(s)
+ regr: 0-7 for register number.
+
+*/
+
+extern void pi_write_regr(PIA *pi, int cont, int regr, int val);
+
+extern int pi_read_regr(PIA *pi, int cont, int regr);
+
+extern void pi_write_block(PIA *pi, char * buf, int count);
+
+extern void pi_read_block(PIA *pi, char * buf, int count);
+
+extern void pi_connect(PIA *pi);
+
+extern void pi_disconnect(PIA *pi);
+
+extern void pi_do_claimed(PIA *pi, void (*cont)(void));
+extern int pi_schedule_claimed(PIA *pi, void (*cont)(void));
+
+/* macros and functions exported to the protocol modules */
+
+#define delay_p (pi->delay?udelay(pi->delay):(void)0)
+#define out_p(offs,byte) outb(byte,pi->port+offs); delay_p;
+#define in_p(offs) (delay_p,inb(pi->port+offs))
+
+#define w0(byte) {out_p(0,byte);}
+#define r0() (in_p(0) & 0xff)
+#define w1(byte) {out_p(1,byte);}
+#define r1() (in_p(1) & 0xff)
+#define w2(byte) {out_p(2,byte);}
+#define r2() (in_p(2) & 0xff)
+#define w3(byte) {out_p(3,byte);}
+#define w4(byte) {out_p(4,byte);}
+#define r4() (in_p(4) & 0xff)
+#define w4w(data) {outw(data,pi->port+4); delay_p;}
+#define w4l(data) {outl(data,pi->port+4); delay_p;}
+#define r4w() (delay_p,inw(pi->port+4)&0xffff)
+#define r4l() (delay_p,inl(pi->port+4)&0xffffffff)
+
+static inline u16 pi_swab16( char *b, int k)
+
+{ union { u16 u; char t[2]; } r;
+
+ r.t[0]=b[2*k+1]; r.t[1]=b[2*k];
+ return r.u;
+}
+
+static inline u32 pi_swab32( char *b, int k)
+
+{ union { u32 u; char f[4]; } r;
+
+ r.f[0]=b[4*k+1]; r.f[1]=b[4*k];
+ r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2];
+ return r.u;
+}
+
+struct pi_protocol {
+
+ char name[8]; /* name for this protocol */
+ int index; /* index into protocol table */
+
+ int max_mode; /* max mode number */
+ int epp_first; /* modes >= this use 8 ports */
+
+ int default_delay; /* delay parameter if not specified */
+ int max_units; /* max chained units probed for */
+
+ void (*write_regr)(PIA *,int,int,int);
+ int (*read_regr)(PIA *,int,int);
+ void (*write_block)(PIA *,char *,int);
+ void (*read_block)(PIA *,char *,int);
+
+ void (*connect)(PIA *);
+ void (*disconnect)(PIA *);
+
+ int (*test_port)(PIA *);
+ int (*probe_unit)(PIA *);
+ int (*test_proto)(PIA *,char *,int);
+ void (*log_adapter)(PIA *,char *,int);
+
+ int (*init_proto)(PIA *);
+ void (*release_proto)(PIA *);
+ struct module *owner;
+};
+
+typedef struct pi_protocol PIP;
+
+extern int paride_register( PIP * );
+extern void paride_unregister ( PIP * );
+void *pi_register_driver(char *);
+void pi_unregister_driver(void *);
+
+#endif /* __DRIVERS_PARIDE_H__ */
+/* end of paride.h */
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
new file mode 100644
index 000000000..a5ab40784
--- /dev/null
+++ b/drivers/block/paride/pcd.c
@@ -0,0 +1,1042 @@
+/*
+ pcd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is a high-level driver for parallel port ATAPI CD-ROM
+ drives based on chips supported by the paride module.
+
+ By default, the driver will autoprobe for a single parallel
+ port ATAPI CD-ROM drive, but if their individual parameters are
+ specified, the driver can handle up to 4 drives.
+
+ The behaviour of the pcd driver can be altered by setting
+ some parameters from the insmod command line. The following
+ parameters are adjustable:
+
+ drive0 These four arguments can be arrays of
+ drive1 1-6 integers as follows:
+ drive2
+ drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
+
+ Where,
+
+ <prt> is the base of the parallel port address for
+ the corresponding drive. (required)
+
+ <pro> is the protocol number for the adapter that
+ supports this drive. These numbers are
+ logged by 'paride' when the protocol modules
+ are initialised. (0 if not given)
+
+ <uni> for those adapters that support chained
+ devices, this is the unit selector for the
+ chain of devices on the given port. It should
+ be zero for devices that don't support chaining.
+ (0 if not given)
+
+ <mod> this can be -1 to choose the best mode, or one
+ of the mode numbers supported by the adapter.
+ (-1 if not given)
+
+ <slv> ATAPI CD-ROMs can be jumpered to master or slave.
+ Set this to 0 to choose the master drive, 1 to
+ choose the slave, -1 (the default) to choose the
+ first drive found.
+
+ <dly> some parallel ports require the driver to
+ go more slowly. -1 sets a default value that
+ should work with the chosen protocol. Otherwise,
+ set this to a small integer, the larger it is
+ the slower the port i/o. In some cases, setting
+ this to zero will speed up the device. (default -1)
+
+ major You may use this parameter to override the
+ default major number (46) that this driver
+ will use. Be sure to change the device
+ name as well.
+
+ name This parameter is a character string that
+ contains the name the kernel will use for this
+ device (in /proc output, for instance).
+ (default "pcd")
+
+ verbose This parameter controls the amount of logging
+ that the driver will do. Set it to 0 for
+ normal operation, 1 to see autoprobe progress
+ messages, or 2 to see additional debugging
+ output. (default 0)
+
+ nice This parameter controls the driver's use of
+ idle CPU time, at the expense of some speed.
+
+ If this driver is built into the kernel, you can use the
+ following kernel command line parameters, with the same values
+ as the corresponding module parameters listed above:
+
+ pcd.drive0
+ pcd.drive1
+ pcd.drive2
+ pcd.drive3
+ pcd.nice
+
+ In addition, you can use the parameter pcd.disable to disable
+ the driver entirely.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.01.24 Added test unit ready support
+ 1.02 GRG 1998.05.06 Changes to pcd_completion, ready_wait,
+ and loosen interpretation of ATAPI
+ standard for clearing error status.
+ Use spinlocks. Eliminate sti().
+ 1.03 GRG 1998.06.16 Eliminated an Ugh
+ 1.04 GRG 1998.08.15 Added extra debugging, improvements to
+ pcd_completion, use HZ in loop timing
+ 1.05 GRG 1998.08.16 Conformed to "Uniform CD-ROM" standard
+ 1.06 GRG 1998.08.19 Added audio ioctl support
+ 1.07 GRG 1998.09.24 Increased reset timeout, added jumbo support
+
+*/
+
+#define PCD_VERSION "1.07"
+#define PCD_MAJOR 46
+#define PCD_NAME "pcd"
+#define PCD_UNITS 4
+
+/* Here are things one can override from the insmod command.
+ Most are autoprobed by paride unless set here. Verbose is off
+ by default.
+
+*/
+
+static int verbose = 0;
+static int major = PCD_MAJOR;
+static char *name = PCD_NAME;
+static int nice = 0;
+static int disable = 0;
+
+static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
+
+static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
+static int pcd_drive_count;
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY};
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/cdrom.h>
+#include <linux/spinlock.h>
+#include <linux/blk-mq.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+static DEFINE_MUTEX(pcd_mutex);
+static DEFINE_SPINLOCK(pcd_lock);
+
+module_param(verbose, int, 0644);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param(nice, int, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+#include "pseudo.h"
+
+#define PCD_RETRIES 5
+#define PCD_TMO 800 /* timeout in jiffies */
+#define PCD_DELAY 50 /* spin delay in uS */
+#define PCD_READY_TMO 20 /* in seconds */
+#define PCD_RESET_TMO 100 /* in tenths of a second */
+
+#define PCD_SPIN (1000000*PCD_TMO)/(HZ*PCD_DELAY)
+
+#define IDE_ERR 0x01
+#define IDE_DRQ 0x08
+#define IDE_READY 0x40
+#define IDE_BUSY 0x80
+
+static int pcd_open(struct cdrom_device_info *cdi, int purpose);
+static void pcd_release(struct cdrom_device_info *cdi);
+static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr);
+static unsigned int pcd_check_events(struct cdrom_device_info *cdi,
+ unsigned int clearing, int slot_nr);
+static int pcd_tray_move(struct cdrom_device_info *cdi, int position);
+static int pcd_lock_door(struct cdrom_device_info *cdi, int lock);
+static int pcd_drive_reset(struct cdrom_device_info *cdi);
+static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn);
+static int pcd_audio_ioctl(struct cdrom_device_info *cdi,
+ unsigned int cmd, void *arg);
+static int pcd_packet(struct cdrom_device_info *cdi,
+ struct packet_command *cgc);
+
+static void do_pcd_read_drq(void);
+static blk_status_t pcd_queue_rq(struct blk_mq_hw_ctx *hctx,
+ const struct blk_mq_queue_data *bd);
+static void do_pcd_read(void);
+
+struct pcd_unit {
+ struct pi_adapter pia; /* interface to paride layer */
+ struct pi_adapter *pi;
+ int drive; /* master/slave */
+ int last_sense; /* result of last request sense */
+ int changed; /* media change seen */
+ int present; /* does this unit exist ? */
+ char *name; /* pcd0, pcd1, etc */
+ struct cdrom_device_info info; /* uniform cdrom interface */
+ struct gendisk *disk;
+ struct blk_mq_tag_set tag_set;
+ struct list_head rq_list;
+};
+
+static struct pcd_unit pcd[PCD_UNITS];
+
+static char pcd_scratch[64];
+static char pcd_buffer[2048]; /* raw block buffer */
+static int pcd_bufblk = -1; /* block in buffer, in CD units,
+ -1 for nothing there. See also
+ pd_unit.
+ */
+
+/* the variables below are used mainly in the I/O request engine, which
+ processes only one request at a time.
+*/
+
+static struct pcd_unit *pcd_current; /* current request's drive */
+static struct request *pcd_req;
+static int pcd_retries; /* retries on current request */
+static int pcd_busy; /* request being processed ? */
+static int pcd_sector; /* address of next requested sector */
+static int pcd_count; /* number of blocks still to do */
+static char *pcd_buf; /* buffer for request in progress */
+static void *par_drv; /* reference of parport driver */
+
+/* kernel glue structures */
+
+static int pcd_block_open(struct block_device *bdev, fmode_t mode)
+{
+ struct pcd_unit *cd = bdev->bd_disk->private_data;
+ int ret;
+
+ bdev_check_media_change(bdev);
+
+ mutex_lock(&pcd_mutex);
+ ret = cdrom_open(&cd->info, bdev, mode);
+ mutex_unlock(&pcd_mutex);
+
+ return ret;
+}
+
+static void pcd_block_release(struct gendisk *disk, fmode_t mode)
+{
+ struct pcd_unit *cd = disk->private_data;
+ mutex_lock(&pcd_mutex);
+ cdrom_release(&cd->info, mode);
+ mutex_unlock(&pcd_mutex);
+}
+
+static int pcd_block_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
+{
+ struct pcd_unit *cd = bdev->bd_disk->private_data;
+ int ret;
+
+ mutex_lock(&pcd_mutex);
+ ret = cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
+ mutex_unlock(&pcd_mutex);
+
+ return ret;
+}
+
+static unsigned int pcd_block_check_events(struct gendisk *disk,
+ unsigned int clearing)
+{
+ struct pcd_unit *cd = disk->private_data;
+ return cdrom_check_events(&cd->info, clearing);
+}
+
+static const struct block_device_operations pcd_bdops = {
+ .owner = THIS_MODULE,
+ .open = pcd_block_open,
+ .release = pcd_block_release,
+ .ioctl = pcd_block_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = blkdev_compat_ptr_ioctl,
+#endif
+ .check_events = pcd_block_check_events,
+};
+
+static const struct cdrom_device_ops pcd_dops = {
+ .open = pcd_open,
+ .release = pcd_release,
+ .drive_status = pcd_drive_status,
+ .check_events = pcd_check_events,
+ .tray_move = pcd_tray_move,
+ .lock_door = pcd_lock_door,
+ .get_mcn = pcd_get_mcn,
+ .reset = pcd_drive_reset,
+ .audio_ioctl = pcd_audio_ioctl,
+ .generic_packet = pcd_packet,
+ .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
+ CDC_MCN | CDC_MEDIA_CHANGED | CDC_RESET |
+ CDC_PLAY_AUDIO | CDC_GENERIC_PACKET | CDC_CD_R |
+ CDC_CD_RW,
+};
+
+static const struct blk_mq_ops pcd_mq_ops = {
+ .queue_rq = pcd_queue_rq,
+};
+
+static int pcd_open(struct cdrom_device_info *cdi, int purpose)
+{
+ struct pcd_unit *cd = cdi->handle;
+ if (!cd->present)
+ return -ENODEV;
+ return 0;
+}
+
+static void pcd_release(struct cdrom_device_info *cdi)
+{
+}
+
+static inline int status_reg(struct pcd_unit *cd)
+{
+ return pi_read_regr(cd->pi, 1, 6);
+}
+
+static inline int read_reg(struct pcd_unit *cd, int reg)
+{
+ return pi_read_regr(cd->pi, 0, reg);
+}
+
+static inline void write_reg(struct pcd_unit *cd, int reg, int val)
+{
+ pi_write_regr(cd->pi, 0, reg, val);
+}
+
+static int pcd_wait(struct pcd_unit *cd, int go, int stop, char *fun, char *msg)
+{
+ int j, r, e, s, p;
+
+ j = 0;
+ while ((((r = status_reg(cd)) & go) || (stop && (!(r & stop))))
+ && (j++ < PCD_SPIN))
+ udelay(PCD_DELAY);
+
+ if ((r & (IDE_ERR & stop)) || (j > PCD_SPIN)) {
+ s = read_reg(cd, 7);
+ e = read_reg(cd, 1);
+ p = read_reg(cd, 2);
+ if (j > PCD_SPIN)
+ e |= 0x100;
+ if (fun)
+ printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
+ " loop=%d phase=%d\n",
+ cd->name, fun, msg, r, s, e, j, p);
+ return (s << 8) + r;
+ }
+ return 0;
+}
+
+static int pcd_command(struct pcd_unit *cd, char *cmd, int dlen, char *fun)
+{
+ pi_connect(cd->pi);
+
+ write_reg(cd, 6, 0xa0 + 0x10 * cd->drive);
+
+ if (pcd_wait(cd, IDE_BUSY | IDE_DRQ, 0, fun, "before command")) {
+ pi_disconnect(cd->pi);
+ return -1;
+ }
+
+ write_reg(cd, 4, dlen % 256);
+ write_reg(cd, 5, dlen / 256);
+ write_reg(cd, 7, 0xa0); /* ATAPI packet command */
+
+ if (pcd_wait(cd, IDE_BUSY, IDE_DRQ, fun, "command DRQ")) {
+ pi_disconnect(cd->pi);
+ return -1;
+ }
+
+ if (read_reg(cd, 2) != 1) {
+ printk("%s: %s: command phase error\n", cd->name, fun);
+ pi_disconnect(cd->pi);
+ return -1;
+ }
+
+ pi_write_block(cd->pi, cmd, 12);
+
+ return 0;
+}
+
+static int pcd_completion(struct pcd_unit *cd, char *buf, char *fun)
+{
+ int r, d, p, n, k, j;
+
+ r = -1;
+ k = 0;
+ j = 0;
+
+ if (!pcd_wait(cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR,
+ fun, "completion")) {
+ r = 0;
+ while (read_reg(cd, 7) & IDE_DRQ) {
+ d = read_reg(cd, 4) + 256 * read_reg(cd, 5);
+ n = (d + 3) & 0xfffc;
+ p = read_reg(cd, 2) & 3;
+
+ if ((p == 2) && (n > 0) && (j == 0)) {
+ pi_read_block(cd->pi, buf, n);
+ if (verbose > 1)
+ printk("%s: %s: Read %d bytes\n",
+ cd->name, fun, n);
+ r = 0;
+ j++;
+ } else {
+ if (verbose > 1)
+ printk
+ ("%s: %s: Unexpected phase %d, d=%d, k=%d\n",
+ cd->name, fun, p, d, k);
+ if (verbose < 2)
+ printk_once(
+ "%s: WARNING: ATAPI phase errors\n",
+ cd->name);
+ mdelay(1);
+ }
+ if (k++ > PCD_TMO) {
+ printk("%s: Stuck DRQ\n", cd->name);
+ break;
+ }
+ if (pcd_wait
+ (cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR, fun,
+ "completion")) {
+ r = -1;
+ break;
+ }
+ }
+ }
+
+ pi_disconnect(cd->pi);
+
+ return r;
+}
+
+static void pcd_req_sense(struct pcd_unit *cd, char *fun)
+{
+ char rs_cmd[12] = { 0x03, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
+ char buf[16];
+ int r, c;
+
+ r = pcd_command(cd, rs_cmd, 16, "Request sense");
+ mdelay(1);
+ if (!r)
+ pcd_completion(cd, buf, "Request sense");
+
+ cd->last_sense = -1;
+ c = 2;
+ if (!r) {
+ if (fun)
+ printk("%s: %s: Sense key: %x, ASC: %x, ASQ: %x\n",
+ cd->name, fun, buf[2] & 0xf, buf[12], buf[13]);
+ c = buf[2] & 0xf;
+ cd->last_sense =
+ c | ((buf[12] & 0xff) << 8) | ((buf[13] & 0xff) << 16);
+ }
+ if ((c == 2) || (c == 6))
+ cd->changed = 1;
+}
+
+static int pcd_atapi(struct pcd_unit *cd, char *cmd, int dlen, char *buf, char *fun)
+{
+ int r;
+
+ r = pcd_command(cd, cmd, dlen, fun);
+ mdelay(1);
+ if (!r)
+ r = pcd_completion(cd, buf, fun);
+ if (r)
+ pcd_req_sense(cd, fun);
+
+ return r;
+}
+
+static int pcd_packet(struct cdrom_device_info *cdi, struct packet_command *cgc)
+{
+ return pcd_atapi(cdi->handle, cgc->cmd, cgc->buflen, cgc->buffer,
+ "generic packet");
+}
+
+#define DBMSG(msg) ((verbose>1)?(msg):NULL)
+
+static unsigned int pcd_check_events(struct cdrom_device_info *cdi,
+ unsigned int clearing, int slot_nr)
+{
+ struct pcd_unit *cd = cdi->handle;
+ int res = cd->changed;
+ if (res)
+ cd->changed = 0;
+ return res ? DISK_EVENT_MEDIA_CHANGE : 0;
+}
+
+static int pcd_lock_door(struct cdrom_device_info *cdi, int lock)
+{
+ char un_cmd[12] = { 0x1e, 0, 0, 0, lock, 0, 0, 0, 0, 0, 0, 0 };
+
+ return pcd_atapi(cdi->handle, un_cmd, 0, pcd_scratch,
+ lock ? "lock door" : "unlock door");
+}
+
+static int pcd_tray_move(struct cdrom_device_info *cdi, int position)
+{
+ char ej_cmd[12] = { 0x1b, 0, 0, 0, 3 - position, 0, 0, 0, 0, 0, 0, 0 };
+
+ return pcd_atapi(cdi->handle, ej_cmd, 0, pcd_scratch,
+ position ? "eject" : "close tray");
+}
+
+static void pcd_sleep(int cs)
+{
+ schedule_timeout_interruptible(cs);
+}
+
+static int pcd_reset(struct pcd_unit *cd)
+{
+ int i, k, flg;
+ int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+
+ pi_connect(cd->pi);
+ write_reg(cd, 6, 0xa0 + 0x10 * cd->drive);
+ write_reg(cd, 7, 8);
+
+ pcd_sleep(20 * HZ / 1000); /* delay a bit */
+
+ k = 0;
+ while ((k++ < PCD_RESET_TMO) && (status_reg(cd) & IDE_BUSY))
+ pcd_sleep(HZ / 10);
+
+ flg = 1;
+ for (i = 0; i < 5; i++)
+ flg &= (read_reg(cd, i + 1) == expect[i]);
+
+ if (verbose) {
+ printk("%s: Reset (%d) signature = ", cd->name, k);
+ for (i = 0; i < 5; i++)
+ printk("%3x", read_reg(cd, i + 1));
+ if (!flg)
+ printk(" (incorrect)");
+ printk("\n");
+ }
+
+ pi_disconnect(cd->pi);
+ return flg - 1;
+}
+
+static int pcd_drive_reset(struct cdrom_device_info *cdi)
+{
+ return pcd_reset(cdi->handle);
+}
+
+static int pcd_ready_wait(struct pcd_unit *cd, int tmo)
+{
+ char tr_cmd[12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ int k, p;
+
+ k = 0;
+ while (k < tmo) {
+ cd->last_sense = 0;
+ pcd_atapi(cd, tr_cmd, 0, NULL, DBMSG("test unit ready"));
+ p = cd->last_sense;
+ if (!p)
+ return 0;
+ if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6)))
+ return p;
+ k++;
+ pcd_sleep(HZ);
+ }
+ return 0x000020; /* timeout */
+}
+
+static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
+{
+ char rc_cmd[12] = { 0x25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ struct pcd_unit *cd = cdi->handle;
+
+ if (pcd_ready_wait(cd, PCD_READY_TMO))
+ return CDS_DRIVE_NOT_READY;
+ if (pcd_atapi(cd, rc_cmd, 8, pcd_scratch, DBMSG("check media")))
+ return CDS_NO_DISC;
+ return CDS_DISC_OK;
+}
+
+static int pcd_identify(struct pcd_unit *cd)
+{
+ char id_cmd[12] = { 0x12, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+ char id[18];
+ int k, s;
+
+ pcd_bufblk = -1;
+
+ s = pcd_atapi(cd, id_cmd, 36, pcd_buffer, "identify");
+
+ if (s)
+ return -1;
+ if ((pcd_buffer[0] & 0x1f) != 5) {
+ if (verbose)
+ printk("%s: %s is not a CD-ROM\n",
+ cd->name, cd->drive ? "Slave" : "Master");
+ return -1;
+ }
+ memcpy(id, pcd_buffer + 16, 16);
+ id[16] = 0;
+ k = 16;
+ while ((k >= 0) && (id[k] <= 0x20)) {
+ id[k] = 0;
+ k--;
+ }
+
+ printk("%s: %s: %s\n", cd->name, cd->drive ? "Slave" : "Master", id);
+
+ return 0;
+}
+
+/*
+ * returns 0, with id set if drive is detected, otherwise an error code.
+ */
+static int pcd_probe(struct pcd_unit *cd, int ms)
+{
+ if (ms == -1) {
+ for (cd->drive = 0; cd->drive <= 1; cd->drive++)
+ if (!pcd_reset(cd) && !pcd_identify(cd))
+ return 0;
+ } else {
+ cd->drive = ms;
+ if (!pcd_reset(cd) && !pcd_identify(cd))
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static int pcd_probe_capabilities(struct pcd_unit *cd)
+{
+ char cmd[12] = { 0x5a, 1 << 3, 0x2a, 0, 0, 0, 0, 18, 0, 0, 0, 0 };
+ char buffer[32];
+ int ret;
+
+ ret = pcd_atapi(cd, cmd, 18, buffer, "mode sense capabilities");
+ if (ret)
+ return ret;
+
+ /* we should now have the cap page */
+ if ((buffer[11] & 1) == 0)
+ cd->info.mask |= CDC_CD_R;
+ if ((buffer[11] & 2) == 0)
+ cd->info.mask |= CDC_CD_RW;
+ if ((buffer[12] & 1) == 0)
+ cd->info.mask |= CDC_PLAY_AUDIO;
+ if ((buffer[14] & 1) == 0)
+ cd->info.mask |= CDC_LOCK;
+ if ((buffer[14] & 8) == 0)
+ cd->info.mask |= CDC_OPEN_TRAY;
+ if ((buffer[14] >> 6) == 0)
+ cd->info.mask |= CDC_CLOSE_TRAY;
+
+ return 0;
+}
+
+/* I/O request processing */
+static int pcd_queue;
+
+static int set_next_request(void)
+{
+ struct pcd_unit *cd;
+ int old_pos = pcd_queue;
+
+ do {
+ cd = &pcd[pcd_queue];
+ if (++pcd_queue == PCD_UNITS)
+ pcd_queue = 0;
+ if (cd->present && !list_empty(&cd->rq_list)) {
+ pcd_req = list_first_entry(&cd->rq_list, struct request,
+ queuelist);
+ list_del_init(&pcd_req->queuelist);
+ blk_mq_start_request(pcd_req);
+ break;
+ }
+ } while (pcd_queue != old_pos);
+
+ return pcd_req != NULL;
+}
+
+static void pcd_request(void)
+{
+ struct pcd_unit *cd;
+
+ if (pcd_busy)
+ return;
+
+ if (!pcd_req && !set_next_request())
+ return;
+
+ cd = pcd_req->q->disk->private_data;
+ if (cd != pcd_current)
+ pcd_bufblk = -1;
+ pcd_current = cd;
+ pcd_sector = blk_rq_pos(pcd_req);
+ pcd_count = blk_rq_cur_sectors(pcd_req);
+ pcd_buf = bio_data(pcd_req->bio);
+ pcd_busy = 1;
+ ps_set_intr(do_pcd_read, NULL, 0, nice);
+}
+
+static blk_status_t pcd_queue_rq(struct blk_mq_hw_ctx *hctx,
+ const struct blk_mq_queue_data *bd)
+{
+ struct pcd_unit *cd = hctx->queue->queuedata;
+
+ if (rq_data_dir(bd->rq) != READ) {
+ blk_mq_start_request(bd->rq);
+ return BLK_STS_IOERR;
+ }
+
+ spin_lock_irq(&pcd_lock);
+ list_add_tail(&bd->rq->queuelist, &cd->rq_list);
+ pcd_request();
+ spin_unlock_irq(&pcd_lock);
+
+ return BLK_STS_OK;
+}
+
+static inline void next_request(blk_status_t err)
+{
+ unsigned long saved_flags;
+
+ spin_lock_irqsave(&pcd_lock, saved_flags);
+ if (!blk_update_request(pcd_req, err, blk_rq_cur_bytes(pcd_req))) {
+ __blk_mq_end_request(pcd_req, err);
+ pcd_req = NULL;
+ }
+ pcd_busy = 0;
+ pcd_request();
+ spin_unlock_irqrestore(&pcd_lock, saved_flags);
+}
+
+static int pcd_ready(void)
+{
+ return (((status_reg(pcd_current) & (IDE_BUSY | IDE_DRQ)) == IDE_DRQ));
+}
+
+static void pcd_transfer(void)
+{
+
+ while (pcd_count && (pcd_sector / 4 == pcd_bufblk)) {
+ int o = (pcd_sector % 4) * 512;
+ memcpy(pcd_buf, pcd_buffer + o, 512);
+ pcd_count--;
+ pcd_buf += 512;
+ pcd_sector++;
+ }
+}
+
+static void pcd_start(void)
+{
+ int b, i;
+ char rd_cmd[12] = { 0xa8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 };
+
+ pcd_bufblk = pcd_sector / 4;
+ b = pcd_bufblk;
+ for (i = 0; i < 4; i++) {
+ rd_cmd[5 - i] = b & 0xff;
+ b = b >> 8;
+ }
+
+ if (pcd_command(pcd_current, rd_cmd, 2048, "read block")) {
+ pcd_bufblk = -1;
+ next_request(BLK_STS_IOERR);
+ return;
+ }
+
+ mdelay(1);
+
+ ps_set_intr(do_pcd_read_drq, pcd_ready, PCD_TMO, nice);
+}
+
+static void do_pcd_read(void)
+{
+ pcd_busy = 1;
+ pcd_retries = 0;
+ pcd_transfer();
+ if (!pcd_count) {
+ next_request(0);
+ return;
+ }
+
+ pi_do_claimed(pcd_current->pi, pcd_start);
+}
+
+static void do_pcd_read_drq(void)
+{
+ unsigned long saved_flags;
+
+ if (pcd_completion(pcd_current, pcd_buffer, "read block")) {
+ if (pcd_retries < PCD_RETRIES) {
+ mdelay(1);
+ pcd_retries++;
+ pi_do_claimed(pcd_current->pi, pcd_start);
+ return;
+ }
+ pcd_bufblk = -1;
+ next_request(BLK_STS_IOERR);
+ return;
+ }
+
+ do_pcd_read();
+ spin_lock_irqsave(&pcd_lock, saved_flags);
+ pcd_request();
+ spin_unlock_irqrestore(&pcd_lock, saved_flags);
+}
+
+/* the audio_ioctl stuff is adapted from sr_ioctl.c */
+
+static int pcd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, void *arg)
+{
+ struct pcd_unit *cd = cdi->handle;
+
+ switch (cmd) {
+
+ case CDROMREADTOCHDR:
+
+ {
+ char cmd[12] =
+ { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12,
+ 0, 0, 0 };
+ struct cdrom_tochdr *tochdr =
+ (struct cdrom_tochdr *) arg;
+ char buffer[32];
+ int r;
+
+ r = pcd_atapi(cd, cmd, 12, buffer, "read toc header");
+
+ tochdr->cdth_trk0 = buffer[2];
+ tochdr->cdth_trk1 = buffer[3];
+
+ return r ? -EIO : 0;
+ }
+
+ case CDROMREADTOCENTRY:
+
+ {
+ char cmd[12] =
+ { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12,
+ 0, 0, 0 };
+
+ struct cdrom_tocentry *tocentry =
+ (struct cdrom_tocentry *) arg;
+ unsigned char buffer[32];
+ int r;
+
+ cmd[1] =
+ (tocentry->cdte_format == CDROM_MSF ? 0x02 : 0);
+ cmd[6] = tocentry->cdte_track;
+
+ r = pcd_atapi(cd, cmd, 12, buffer, "read toc entry");
+
+ tocentry->cdte_ctrl = buffer[5] & 0xf;
+ tocentry->cdte_adr = buffer[5] >> 4;
+ tocentry->cdte_datamode =
+ (tocentry->cdte_ctrl & 0x04) ? 1 : 0;
+ if (tocentry->cdte_format == CDROM_MSF) {
+ tocentry->cdte_addr.msf.minute = buffer[9];
+ tocentry->cdte_addr.msf.second = buffer[10];
+ tocentry->cdte_addr.msf.frame = buffer[11];
+ } else
+ tocentry->cdte_addr.lba =
+ (((((buffer[8] << 8) + buffer[9]) << 8)
+ + buffer[10]) << 8) + buffer[11];
+
+ return r ? -EIO : 0;
+ }
+
+ default:
+
+ return -ENOSYS;
+ }
+}
+
+static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
+{
+ char cmd[12] =
+ { GPCMD_READ_SUBCHANNEL, 0, 0x40, 2, 0, 0, 0, 0, 24, 0, 0, 0 };
+ char buffer[32];
+
+ if (pcd_atapi(cdi->handle, cmd, 24, buffer, "get mcn"))
+ return -EIO;
+
+ memcpy(mcn->medium_catalog_number, buffer + 9, 13);
+ mcn->medium_catalog_number[13] = 0;
+
+ return 0;
+}
+
+static int pcd_init_unit(struct pcd_unit *cd, bool autoprobe, int port,
+ int mode, int unit, int protocol, int delay, int ms)
+{
+ struct gendisk *disk;
+ int ret;
+
+ ret = blk_mq_alloc_sq_tag_set(&cd->tag_set, &pcd_mq_ops, 1,
+ BLK_MQ_F_SHOULD_MERGE);
+ if (ret)
+ return ret;
+
+ disk = blk_mq_alloc_disk(&cd->tag_set, cd);
+ if (IS_ERR(disk)) {
+ ret = PTR_ERR(disk);
+ goto out_free_tag_set;
+ }
+
+ INIT_LIST_HEAD(&cd->rq_list);
+ blk_queue_bounce_limit(disk->queue, BLK_BOUNCE_HIGH);
+ cd->disk = disk;
+ cd->pi = &cd->pia;
+ cd->present = 0;
+ cd->last_sense = 0;
+ cd->changed = 1;
+ cd->drive = (*drives[cd - pcd])[D_SLV];
+
+ cd->name = &cd->info.name[0];
+ snprintf(cd->name, sizeof(cd->info.name), "%s%d", name, unit);
+ cd->info.ops = &pcd_dops;
+ cd->info.handle = cd;
+ cd->info.speed = 0;
+ cd->info.capacity = 1;
+ cd->info.mask = 0;
+ disk->major = major;
+ disk->first_minor = unit;
+ disk->minors = 1;
+ strcpy(disk->disk_name, cd->name); /* umm... */
+ disk->fops = &pcd_bdops;
+ disk->flags |= GENHD_FL_NO_PART;
+ disk->events = DISK_EVENT_MEDIA_CHANGE;
+ disk->event_flags = DISK_EVENT_FLAG_BLOCK_ON_EXCL_WRITE;
+
+ if (!pi_init(cd->pi, autoprobe, port, mode, unit, protocol, delay,
+ pcd_buffer, PI_PCD, verbose, cd->name)) {
+ ret = -ENODEV;
+ goto out_free_disk;
+ }
+ ret = pcd_probe(cd, ms);
+ if (ret)
+ goto out_pi_release;
+
+ cd->present = 1;
+ pcd_probe_capabilities(cd);
+ ret = register_cdrom(cd->disk, &cd->info);
+ if (ret)
+ goto out_pi_release;
+ ret = add_disk(cd->disk);
+ if (ret)
+ goto out_unreg_cdrom;
+ return 0;
+
+out_unreg_cdrom:
+ unregister_cdrom(&cd->info);
+out_pi_release:
+ pi_release(cd->pi);
+out_free_disk:
+ put_disk(cd->disk);
+out_free_tag_set:
+ blk_mq_free_tag_set(&cd->tag_set);
+ return ret;
+}
+
+static int __init pcd_init(void)
+{
+ int found = 0, unit;
+
+ if (disable)
+ return -EINVAL;
+
+ if (register_blkdev(major, name))
+ return -EBUSY;
+
+ pr_info("%s: %s version %s, major %d, nice %d\n",
+ name, name, PCD_VERSION, major, nice);
+
+ par_drv = pi_register_driver(name);
+ if (!par_drv) {
+ pr_err("failed to register %s driver\n", name);
+ goto out_unregister_blkdev;
+ }
+
+ for (unit = 0; unit < PCD_UNITS; unit++) {
+ if ((*drives[unit])[D_PRT])
+ pcd_drive_count++;
+ }
+
+ if (pcd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
+ if (!pcd_init_unit(pcd, 1, -1, -1, -1, -1, -1, -1))
+ found++;
+ } else {
+ for (unit = 0; unit < PCD_UNITS; unit++) {
+ struct pcd_unit *cd = &pcd[unit];
+ int *conf = *drives[unit];
+
+ if (!conf[D_PRT])
+ continue;
+ if (!pcd_init_unit(cd, 0, conf[D_PRT], conf[D_MOD],
+ conf[D_UNI], conf[D_PRO], conf[D_DLY],
+ conf[D_SLV]))
+ found++;
+ }
+ }
+
+ if (!found) {
+ pr_info("%s: No CD-ROM drive found\n", name);
+ goto out_unregister_pi_driver;
+ }
+
+ return 0;
+
+out_unregister_pi_driver:
+ pi_unregister_driver(par_drv);
+out_unregister_blkdev:
+ unregister_blkdev(major, name);
+ return -ENODEV;
+}
+
+static void __exit pcd_exit(void)
+{
+ struct pcd_unit *cd;
+ int unit;
+
+ for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
+ if (!cd->present)
+ continue;
+
+ unregister_cdrom(&cd->info);
+ del_gendisk(cd->disk);
+ pi_release(cd->pi);
+ put_disk(cd->disk);
+
+ blk_mq_free_tag_set(&cd->tag_set);
+ }
+ pi_unregister_driver(par_drv);
+ unregister_blkdev(major, name);
+}
+
+MODULE_LICENSE("GPL");
+module_init(pcd_init)
+module_exit(pcd_exit)
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
new file mode 100644
index 000000000..f8a75bc90
--- /dev/null
+++ b/drivers/block/paride/pd.c
@@ -0,0 +1,1032 @@
+/*
+ pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is the high-level driver for parallel port IDE hard
+ drives based on chips supported by the paride module.
+
+ By default, the driver will autoprobe for a single parallel
+ port IDE drive, but if their individual parameters are
+ specified, the driver can handle up to 4 drives.
+
+ The behaviour of the pd driver can be altered by setting
+ some parameters from the insmod command line. The following
+ parameters are adjustable:
+
+ drive0 These four arguments can be arrays of
+ drive1 1-8 integers as follows:
+ drive2
+ drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
+
+ Where,
+
+ <prt> is the base of the parallel port address for
+ the corresponding drive. (required)
+
+ <pro> is the protocol number for the adapter that
+ supports this drive. These numbers are
+ logged by 'paride' when the protocol modules
+ are initialised. (0 if not given)
+
+ <uni> for those adapters that support chained
+ devices, this is the unit selector for the
+ chain of devices on the given port. It should
+ be zero for devices that don't support chaining.
+ (0 if not given)
+
+ <mod> this can be -1 to choose the best mode, or one
+ of the mode numbers supported by the adapter.
+ (-1 if not given)
+
+ <geo> this defaults to 0 to indicate that the driver
+ should use the CHS geometry provided by the drive
+ itself. If set to 1, the driver will provide
+ a logical geometry with 64 heads and 32 sectors
+ per track, to be consistent with most SCSI
+ drivers. (0 if not given)
+
+ <sby> set this to zero to disable the power saving
+ standby mode, if needed. (1 if not given)
+
+ <dly> some parallel ports require the driver to
+ go more slowly. -1 sets a default value that
+ should work with the chosen protocol. Otherwise,
+ set this to a small integer, the larger it is
+ the slower the port i/o. In some cases, setting
+ this to zero will speed up the device. (default -1)
+
+ <slv> IDE disks can be jumpered to master or slave.
+ Set this to 0 to choose the master drive, 1 to
+ choose the slave, -1 (the default) to choose the
+ first drive found.
+
+
+ major You may use this parameter to override the
+ default major number (45) that this driver
+ will use. Be sure to change the device
+ name as well.
+
+ name This parameter is a character string that
+ contains the name the kernel will use for this
+ device (in /proc output, for instance).
+ (default "pd")
+
+ cluster The driver will attempt to aggregate requests
+ for adjacent blocks into larger multi-block
+ clusters. The maximum cluster size (in 512
+ byte sectors) is set with this parameter.
+ (default 64)
+
+ verbose This parameter controls the amount of logging
+ that the driver will do. Set it to 0 for
+ normal operation, 1 to see autoprobe progress
+ messages, or 2 to see additional debugging
+ output. (default 0)
+
+ nice This parameter controls the driver's use of
+ idle CPU time, at the expense of some speed.
+
+ If this driver is built into the kernel, you can use kernel
+ the following command line parameters, with the same values
+ as the corresponding module parameters listed above:
+
+ pd.drive0
+ pd.drive1
+ pd.drive2
+ pd.drive3
+ pd.cluster
+ pd.nice
+
+ In addition, you can use the parameter pd.disable to disable
+ the driver entirely.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1997.01.24 Restored pd_reset()
+ Added eject ioctl
+ 1.02 GRG 1998.05.06 SMP spinlock changes,
+ Added slave support
+ 1.03 GRG 1998.06.16 Eliminate an Ugh.
+ 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
+ 1.05 GRG 1998.09.24 Added jumbo support
+
+*/
+
+#define PD_VERSION "1.05"
+#define PD_MAJOR 45
+#define PD_NAME "pd"
+#define PD_UNITS 4
+
+/* Here are things one can override from the insmod command.
+ Most are autoprobed by paride unless set here. Verbose is off
+ by default.
+
+*/
+#include <linux/types.h>
+
+static int verbose = 0;
+static int major = PD_MAJOR;
+static char *name = PD_NAME;
+static int cluster = 64;
+static int nice = 0;
+static int disable = 0;
+
+static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
+
+static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
+
+/* end of parameters */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/cdrom.h> /* for the eject ioctl */
+#include <linux/blk-mq.h>
+#include <linux/blkpg.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+
+static DEFINE_MUTEX(pd_mutex);
+static DEFINE_SPINLOCK(pd_lock);
+
+module_param(verbose, int, 0);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param(cluster, int, 0);
+module_param(nice, int, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+
+#define PD_BITS 4
+
+/* numbers for "SCSI" geometry */
+
+#define PD_LOG_HEADS 64
+#define PD_LOG_SECTS 32
+
+#define PD_ID_OFF 54
+#define PD_ID_LEN 14
+
+#define PD_MAX_RETRIES 5
+#define PD_TMO 800 /* interrupt timeout in jiffies */
+#define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
+
+#define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
+
+#define STAT_ERR 0x00001
+#define STAT_INDEX 0x00002
+#define STAT_ECC 0x00004
+#define STAT_DRQ 0x00008
+#define STAT_SEEK 0x00010
+#define STAT_WRERR 0x00020
+#define STAT_READY 0x00040
+#define STAT_BUSY 0x00080
+
+#define ERR_AMNF 0x00100
+#define ERR_TK0NF 0x00200
+#define ERR_ABRT 0x00400
+#define ERR_MCR 0x00800
+#define ERR_IDNF 0x01000
+#define ERR_MC 0x02000
+#define ERR_UNC 0x04000
+#define ERR_TMO 0x10000
+
+#define IDE_READ 0x20
+#define IDE_WRITE 0x30
+#define IDE_READ_VRFY 0x40
+#define IDE_INIT_DEV_PARMS 0x91
+#define IDE_STANDBY 0x96
+#define IDE_ACKCHANGE 0xdb
+#define IDE_DOORLOCK 0xde
+#define IDE_DOORUNLOCK 0xdf
+#define IDE_IDENTIFY 0xec
+#define IDE_EJECT 0xed
+
+#define PD_NAMELEN 8
+
+struct pd_unit {
+ struct pi_adapter pia; /* interface to paride layer */
+ struct pi_adapter *pi;
+ int access; /* count of active opens ... */
+ int capacity; /* Size of this volume in sectors */
+ int heads; /* physical geometry */
+ int sectors;
+ int cylinders;
+ int can_lba;
+ int drive; /* master=0 slave=1 */
+ int changed; /* Have we seen a disk change ? */
+ int removable; /* removable media device ? */
+ int standby;
+ int alt_geom;
+ char name[PD_NAMELEN]; /* pda, pdb, etc ... */
+ struct gendisk *gd;
+ struct blk_mq_tag_set tag_set;
+ struct list_head rq_list;
+};
+
+static struct pd_unit pd[PD_UNITS];
+
+struct pd_req {
+ /* for REQ_OP_DRV_IN: */
+ enum action (*func)(struct pd_unit *disk);
+};
+
+static char pd_scratch[512]; /* scratch block buffer */
+
+static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
+ "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
+ "IDNF", "MC", "UNC", "???", "TMO"
+};
+
+static void *par_drv; /* reference of parport driver */
+
+static inline int status_reg(struct pd_unit *disk)
+{
+ return pi_read_regr(disk->pi, 1, 6);
+}
+
+static inline int read_reg(struct pd_unit *disk, int reg)
+{
+ return pi_read_regr(disk->pi, 0, reg);
+}
+
+static inline void write_status(struct pd_unit *disk, int val)
+{
+ pi_write_regr(disk->pi, 1, 6, val);
+}
+
+static inline void write_reg(struct pd_unit *disk, int reg, int val)
+{
+ pi_write_regr(disk->pi, 0, reg, val);
+}
+
+static inline u8 DRIVE(struct pd_unit *disk)
+{
+ return 0xa0+0x10*disk->drive;
+}
+
+/* ide command interface */
+
+static void pd_print_error(struct pd_unit *disk, char *msg, int status)
+{
+ int i;
+
+ printk("%s: %s: status = 0x%x =", disk->name, msg, status);
+ for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
+ if (status & (1 << i))
+ printk(" %s", pd_errs[i]);
+ printk("\n");
+}
+
+static void pd_reset(struct pd_unit *disk)
+{ /* called only for MASTER drive */
+ write_status(disk, 4);
+ udelay(50);
+ write_status(disk, 0);
+ udelay(250);
+}
+
+#define DBMSG(msg) ((verbose>1)?(msg):NULL)
+
+static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
+{ /* polled wait */
+ int k, r, e;
+
+ k = 0;
+ while (k < PD_SPIN) {
+ r = status_reg(disk);
+ k++;
+ if (((r & w) == w) && !(r & STAT_BUSY))
+ break;
+ udelay(PD_SPIN_DEL);
+ }
+ e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
+ if (k >= PD_SPIN)
+ e |= ERR_TMO;
+ if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
+ pd_print_error(disk, msg, e);
+ return e;
+}
+
+static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
+{
+ write_reg(disk, 6, DRIVE(disk) + h);
+ write_reg(disk, 1, 0); /* the IDE task file */
+ write_reg(disk, 2, n);
+ write_reg(disk, 3, s);
+ write_reg(disk, 4, c0);
+ write_reg(disk, 5, c1);
+ write_reg(disk, 7, func);
+
+ udelay(1);
+}
+
+static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
+{
+ int c1, c0, h, s;
+
+ if (disk->can_lba) {
+ s = block & 255;
+ c0 = (block >>= 8) & 255;
+ c1 = (block >>= 8) & 255;
+ h = ((block >>= 8) & 15) + 0x40;
+ } else {
+ s = (block % disk->sectors) + 1;
+ h = (block /= disk->sectors) % disk->heads;
+ c0 = (block /= disk->heads) % 256;
+ c1 = (block >>= 8);
+ }
+ pd_send_command(disk, count, s, h, c0, c1, func);
+}
+
+/* The i/o request engine */
+
+enum action {Fail = 0, Ok = 1, Hold, Wait};
+
+static struct request *pd_req; /* current request */
+static enum action (*phase)(void);
+
+static void run_fsm(void);
+
+static void ps_tq_int(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
+
+static void schedule_fsm(void)
+{
+ if (!nice)
+ schedule_delayed_work(&fsm_tq, 0);
+ else
+ schedule_delayed_work(&fsm_tq, nice-1);
+}
+
+static void ps_tq_int(struct work_struct *work)
+{
+ run_fsm();
+}
+
+static enum action do_pd_io_start(void);
+static enum action pd_special(void);
+static enum action do_pd_read_start(void);
+static enum action do_pd_write_start(void);
+static enum action do_pd_read_drq(void);
+static enum action do_pd_write_done(void);
+
+static int pd_queue;
+static int pd_claimed;
+
+static struct pd_unit *pd_current; /* current request's drive */
+static PIA *pi_current; /* current request's PIA */
+
+static int set_next_request(void)
+{
+ struct gendisk *disk;
+ struct request_queue *q;
+ int old_pos = pd_queue;
+
+ do {
+ disk = pd[pd_queue].gd;
+ q = disk ? disk->queue : NULL;
+ if (++pd_queue == PD_UNITS)
+ pd_queue = 0;
+ if (q) {
+ struct pd_unit *disk = q->queuedata;
+
+ if (list_empty(&disk->rq_list))
+ continue;
+
+ pd_req = list_first_entry(&disk->rq_list,
+ struct request,
+ queuelist);
+ list_del_init(&pd_req->queuelist);
+ blk_mq_start_request(pd_req);
+ break;
+ }
+ } while (pd_queue != old_pos);
+
+ return pd_req != NULL;
+}
+
+static void run_fsm(void)
+{
+ while (1) {
+ enum action res;
+ int stop = 0;
+
+ if (!phase) {
+ pd_current = pd_req->q->disk->private_data;
+ pi_current = pd_current->pi;
+ phase = do_pd_io_start;
+ }
+
+ switch (pd_claimed) {
+ case 0:
+ pd_claimed = 1;
+ if (!pi_schedule_claimed(pi_current, run_fsm))
+ return;
+ fallthrough;
+ case 1:
+ pd_claimed = 2;
+ pi_current->proto->connect(pi_current);
+ }
+
+ switch(res = phase()) {
+ case Ok: case Fail: {
+ blk_status_t err;
+
+ err = res == Ok ? 0 : BLK_STS_IOERR;
+ pi_disconnect(pi_current);
+ pd_claimed = 0;
+ phase = NULL;
+ spin_lock_irq(&pd_lock);
+ if (!blk_update_request(pd_req, err,
+ blk_rq_cur_bytes(pd_req))) {
+ __blk_mq_end_request(pd_req, err);
+ pd_req = NULL;
+ stop = !set_next_request();
+ }
+ spin_unlock_irq(&pd_lock);
+ if (stop)
+ return;
+ }
+ fallthrough;
+ case Hold:
+ schedule_fsm();
+ return;
+ case Wait:
+ pi_disconnect(pi_current);
+ pd_claimed = 0;
+ }
+ }
+}
+
+static int pd_retries = 0; /* i/o error retry count */
+static int pd_block; /* address of next requested block */
+static int pd_count; /* number of blocks still to do */
+static int pd_run; /* sectors in current cluster */
+static char *pd_buf; /* buffer for request in progress */
+
+static enum action do_pd_io_start(void)
+{
+ switch (req_op(pd_req)) {
+ case REQ_OP_DRV_IN:
+ phase = pd_special;
+ return pd_special();
+ case REQ_OP_READ:
+ case REQ_OP_WRITE:
+ pd_block = blk_rq_pos(pd_req);
+ pd_count = blk_rq_cur_sectors(pd_req);
+ if (pd_block + pd_count > get_capacity(pd_req->q->disk))
+ return Fail;
+ pd_run = blk_rq_sectors(pd_req);
+ pd_buf = bio_data(pd_req->bio);
+ pd_retries = 0;
+ if (req_op(pd_req) == REQ_OP_READ)
+ return do_pd_read_start();
+ else
+ return do_pd_write_start();
+ default:
+ break;
+ }
+ return Fail;
+}
+
+static enum action pd_special(void)
+{
+ struct pd_req *req = blk_mq_rq_to_pdu(pd_req);
+
+ return req->func(pd_current);
+}
+
+static int pd_next_buf(void)
+{
+ unsigned long saved_flags;
+
+ pd_count--;
+ pd_run--;
+ pd_buf += 512;
+ pd_block++;
+ if (!pd_run)
+ return 1;
+ if (pd_count)
+ return 0;
+ spin_lock_irqsave(&pd_lock, saved_flags);
+ if (!blk_update_request(pd_req, 0, blk_rq_cur_bytes(pd_req))) {
+ __blk_mq_end_request(pd_req, 0);
+ pd_req = NULL;
+ pd_count = 0;
+ pd_buf = NULL;
+ } else {
+ pd_count = blk_rq_cur_sectors(pd_req);
+ pd_buf = bio_data(pd_req->bio);
+ }
+ spin_unlock_irqrestore(&pd_lock, saved_flags);
+ return !pd_count;
+}
+
+static unsigned long pd_timeout;
+
+static enum action do_pd_read_start(void)
+{
+ if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
+ if (pd_retries < PD_MAX_RETRIES) {
+ pd_retries++;
+ return Wait;
+ }
+ return Fail;
+ }
+ pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
+ phase = do_pd_read_drq;
+ pd_timeout = jiffies + PD_TMO;
+ return Hold;
+}
+
+static enum action do_pd_write_start(void)
+{
+ if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
+ if (pd_retries < PD_MAX_RETRIES) {
+ pd_retries++;
+ return Wait;
+ }
+ return Fail;
+ }
+ pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
+ while (1) {
+ if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
+ if (pd_retries < PD_MAX_RETRIES) {
+ pd_retries++;
+ return Wait;
+ }
+ return Fail;
+ }
+ pi_write_block(pd_current->pi, pd_buf, 512);
+ if (pd_next_buf())
+ break;
+ }
+ phase = do_pd_write_done;
+ pd_timeout = jiffies + PD_TMO;
+ return Hold;
+}
+
+static inline int pd_ready(void)
+{
+ return !(status_reg(pd_current) & STAT_BUSY);
+}
+
+static enum action do_pd_read_drq(void)
+{
+ if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
+ return Hold;
+
+ while (1) {
+ if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
+ if (pd_retries < PD_MAX_RETRIES) {
+ pd_retries++;
+ phase = do_pd_read_start;
+ return Wait;
+ }
+ return Fail;
+ }
+ pi_read_block(pd_current->pi, pd_buf, 512);
+ if (pd_next_buf())
+ break;
+ }
+ return Ok;
+}
+
+static enum action do_pd_write_done(void)
+{
+ if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
+ return Hold;
+
+ if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
+ if (pd_retries < PD_MAX_RETRIES) {
+ pd_retries++;
+ phase = do_pd_write_start;
+ return Wait;
+ }
+ return Fail;
+ }
+ return Ok;
+}
+
+/* special io requests */
+
+/* According to the ATA standard, the default CHS geometry should be
+ available following a reset. Some Western Digital drives come up
+ in a mode where only LBA addresses are accepted until the device
+ parameters are initialised.
+*/
+
+static void pd_init_dev_parms(struct pd_unit *disk)
+{
+ pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
+ pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
+ IDE_INIT_DEV_PARMS);
+ udelay(300);
+ pd_wait_for(disk, 0, "Initialise device parameters");
+}
+
+static enum action pd_door_lock(struct pd_unit *disk)
+{
+ if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
+ pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
+ pd_wait_for(disk, STAT_READY, "Lock done");
+ }
+ return Ok;
+}
+
+static enum action pd_door_unlock(struct pd_unit *disk)
+{
+ if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
+ pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
+ pd_wait_for(disk, STAT_READY, "Lock done");
+ }
+ return Ok;
+}
+
+static enum action pd_eject(struct pd_unit *disk)
+{
+ pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
+ pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
+ pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
+ pd_wait_for(disk, 0, DBMSG("before eject"));
+ pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
+ pd_wait_for(disk, 0, DBMSG("after eject"));
+ return Ok;
+}
+
+static enum action pd_media_check(struct pd_unit *disk)
+{
+ int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
+ if (!(r & STAT_ERR)) {
+ pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
+ r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
+ } else
+ disk->changed = 1; /* say changed if other error */
+ if (r & ERR_MC) {
+ disk->changed = 1;
+ pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
+ pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
+ pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
+ r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
+ }
+ return Ok;
+}
+
+static void pd_standby_off(struct pd_unit *disk)
+{
+ pd_wait_for(disk, 0, DBMSG("before STANDBY"));
+ pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
+ pd_wait_for(disk, 0, DBMSG("after STANDBY"));
+}
+
+static enum action pd_identify(struct pd_unit *disk)
+{
+ int j;
+ char id[PD_ID_LEN + 1];
+
+/* WARNING: here there may be dragons. reset() applies to both drives,
+ but we call it only on probing the MASTER. This should allow most
+ common configurations to work, but be warned that a reset can clear
+ settings on the SLAVE drive.
+*/
+
+ if (disk->drive == 0)
+ pd_reset(disk);
+
+ write_reg(disk, 6, DRIVE(disk));
+ pd_wait_for(disk, 0, DBMSG("before IDENT"));
+ pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
+
+ if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
+ return Fail;
+ pi_read_block(disk->pi, pd_scratch, 512);
+ disk->can_lba = pd_scratch[99] & 2;
+ disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
+ disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
+ disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
+ if (disk->can_lba)
+ disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
+ else
+ disk->capacity = disk->sectors * disk->heads * disk->cylinders;
+
+ for (j = 0; j < PD_ID_LEN; j++)
+ id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
+ j = PD_ID_LEN - 1;
+ while ((j >= 0) && (id[j] <= 0x20))
+ j--;
+ j++;
+ id[j] = 0;
+
+ disk->removable = pd_scratch[0] & 0x80;
+
+ printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
+ disk->name, id,
+ disk->drive ? "slave" : "master",
+ disk->capacity, disk->capacity / 2048,
+ disk->cylinders, disk->heads, disk->sectors,
+ disk->removable ? "removable" : "fixed");
+
+ if (disk->capacity)
+ pd_init_dev_parms(disk);
+ if (!disk->standby)
+ pd_standby_off(disk);
+
+ return Ok;
+}
+
+/* end of io request engine */
+
+static blk_status_t pd_queue_rq(struct blk_mq_hw_ctx *hctx,
+ const struct blk_mq_queue_data *bd)
+{
+ struct pd_unit *disk = hctx->queue->queuedata;
+
+ spin_lock_irq(&pd_lock);
+ if (!pd_req) {
+ pd_req = bd->rq;
+ blk_mq_start_request(pd_req);
+ } else
+ list_add_tail(&bd->rq->queuelist, &disk->rq_list);
+ spin_unlock_irq(&pd_lock);
+
+ run_fsm();
+ return BLK_STS_OK;
+}
+
+static int pd_special_command(struct pd_unit *disk,
+ enum action (*func)(struct pd_unit *disk))
+{
+ struct request *rq;
+ struct pd_req *req;
+
+ rq = blk_mq_alloc_request(disk->gd->queue, REQ_OP_DRV_IN, 0);
+ if (IS_ERR(rq))
+ return PTR_ERR(rq);
+ req = blk_mq_rq_to_pdu(rq);
+
+ req->func = func;
+ blk_execute_rq(rq, false);
+ blk_mq_free_request(rq);
+ return 0;
+}
+
+/* kernel glue structures */
+
+static int pd_open(struct block_device *bdev, fmode_t mode)
+{
+ struct pd_unit *disk = bdev->bd_disk->private_data;
+
+ mutex_lock(&pd_mutex);
+ disk->access++;
+
+ if (disk->removable) {
+ pd_special_command(disk, pd_media_check);
+ pd_special_command(disk, pd_door_lock);
+ }
+ mutex_unlock(&pd_mutex);
+ return 0;
+}
+
+static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+ struct pd_unit *disk = bdev->bd_disk->private_data;
+
+ if (disk->alt_geom) {
+ geo->heads = PD_LOG_HEADS;
+ geo->sectors = PD_LOG_SECTS;
+ geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
+ } else {
+ geo->heads = disk->heads;
+ geo->sectors = disk->sectors;
+ geo->cylinders = disk->cylinders;
+ }
+
+ return 0;
+}
+
+static int pd_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ struct pd_unit *disk = bdev->bd_disk->private_data;
+
+ switch (cmd) {
+ case CDROMEJECT:
+ mutex_lock(&pd_mutex);
+ if (disk->access == 1)
+ pd_special_command(disk, pd_eject);
+ mutex_unlock(&pd_mutex);
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void pd_release(struct gendisk *p, fmode_t mode)
+{
+ struct pd_unit *disk = p->private_data;
+
+ mutex_lock(&pd_mutex);
+ if (!--disk->access && disk->removable)
+ pd_special_command(disk, pd_door_unlock);
+ mutex_unlock(&pd_mutex);
+}
+
+static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
+{
+ struct pd_unit *disk = p->private_data;
+ int r;
+ if (!disk->removable)
+ return 0;
+ pd_special_command(disk, pd_media_check);
+ r = disk->changed;
+ disk->changed = 0;
+ return r ? DISK_EVENT_MEDIA_CHANGE : 0;
+}
+
+static const struct block_device_operations pd_fops = {
+ .owner = THIS_MODULE,
+ .open = pd_open,
+ .release = pd_release,
+ .ioctl = pd_ioctl,
+ .compat_ioctl = pd_ioctl,
+ .getgeo = pd_getgeo,
+ .check_events = pd_check_events,
+};
+
+/* probing */
+
+static const struct blk_mq_ops pd_mq_ops = {
+ .queue_rq = pd_queue_rq,
+};
+
+static int pd_probe_drive(struct pd_unit *disk, int autoprobe, int port,
+ int mode, int unit, int protocol, int delay)
+{
+ int index = disk - pd;
+ int *parm = *drives[index];
+ struct gendisk *p;
+ int ret;
+
+ disk->pi = &disk->pia;
+ disk->access = 0;
+ disk->changed = 1;
+ disk->capacity = 0;
+ disk->drive = parm[D_SLV];
+ snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a' + index);
+ disk->alt_geom = parm[D_GEO];
+ disk->standby = parm[D_SBY];
+ INIT_LIST_HEAD(&disk->rq_list);
+
+ if (!pi_init(disk->pi, autoprobe, port, mode, unit, protocol, delay,
+ pd_scratch, PI_PD, verbose, disk->name))
+ return -ENXIO;
+
+ memset(&disk->tag_set, 0, sizeof(disk->tag_set));
+ disk->tag_set.ops = &pd_mq_ops;
+ disk->tag_set.cmd_size = sizeof(struct pd_req);
+ disk->tag_set.nr_hw_queues = 1;
+ disk->tag_set.nr_maps = 1;
+ disk->tag_set.queue_depth = 2;
+ disk->tag_set.numa_node = NUMA_NO_NODE;
+ disk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING;
+ ret = blk_mq_alloc_tag_set(&disk->tag_set);
+ if (ret)
+ goto pi_release;
+
+ p = blk_mq_alloc_disk(&disk->tag_set, disk);
+ if (IS_ERR(p)) {
+ ret = PTR_ERR(p);
+ goto free_tag_set;
+ }
+ disk->gd = p;
+
+ strcpy(p->disk_name, disk->name);
+ p->fops = &pd_fops;
+ p->major = major;
+ p->first_minor = (disk - pd) << PD_BITS;
+ p->minors = 1 << PD_BITS;
+ p->events = DISK_EVENT_MEDIA_CHANGE;
+ p->private_data = disk;
+ blk_queue_max_hw_sectors(p->queue, cluster);
+ blk_queue_bounce_limit(p->queue, BLK_BOUNCE_HIGH);
+
+ if (disk->drive == -1) {
+ for (disk->drive = 0; disk->drive <= 1; disk->drive++) {
+ ret = pd_special_command(disk, pd_identify);
+ if (ret == 0)
+ break;
+ }
+ } else {
+ ret = pd_special_command(disk, pd_identify);
+ }
+ if (ret)
+ goto put_disk;
+ set_capacity(disk->gd, disk->capacity);
+ ret = add_disk(disk->gd);
+ if (ret)
+ goto cleanup_disk;
+ return 0;
+cleanup_disk:
+ put_disk(disk->gd);
+put_disk:
+ put_disk(p);
+ disk->gd = NULL;
+free_tag_set:
+ blk_mq_free_tag_set(&disk->tag_set);
+pi_release:
+ pi_release(disk->pi);
+ return ret;
+}
+
+static int __init pd_init(void)
+{
+ int found = 0, unit, pd_drive_count = 0;
+ struct pd_unit *disk;
+
+ if (disable)
+ return -ENODEV;
+
+ if (register_blkdev(major, name))
+ return -ENODEV;
+
+ printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
+ name, name, PD_VERSION, major, cluster, nice);
+
+ par_drv = pi_register_driver(name);
+ if (!par_drv) {
+ pr_err("failed to register %s driver\n", name);
+ goto out_unregister_blkdev;
+ }
+
+ for (unit = 0; unit < PD_UNITS; unit++) {
+ int *parm = *drives[unit];
+
+ if (parm[D_PRT])
+ pd_drive_count++;
+ }
+
+ if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
+ if (!pd_probe_drive(pd, 1, -1, -1, -1, -1, -1))
+ found++;
+ } else {
+ for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
+ int *parm = *drives[unit];
+ if (!parm[D_PRT])
+ continue;
+ if (!pd_probe_drive(disk, 0, parm[D_PRT], parm[D_MOD],
+ parm[D_UNI], parm[D_PRO], parm[D_DLY]))
+ found++;
+ }
+ }
+ if (!found) {
+ printk("%s: no valid drive found\n", name);
+ goto out_pi_unregister_driver;
+ }
+
+ return 0;
+
+out_pi_unregister_driver:
+ pi_unregister_driver(par_drv);
+out_unregister_blkdev:
+ unregister_blkdev(major, name);
+ return -ENODEV;
+}
+
+static void __exit pd_exit(void)
+{
+ struct pd_unit *disk;
+ int unit;
+ unregister_blkdev(major, name);
+ for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
+ struct gendisk *p = disk->gd;
+ if (p) {
+ disk->gd = NULL;
+ del_gendisk(p);
+ put_disk(p);
+ blk_mq_free_tag_set(&disk->tag_set);
+ pi_release(disk->pi);
+ }
+ }
+}
+
+MODULE_LICENSE("GPL");
+module_init(pd_init)
+module_exit(pd_exit)
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
new file mode 100644
index 000000000..eec1b9fde
--- /dev/null
+++ b/drivers/block/paride/pf.c
@@ -0,0 +1,1057 @@
+/*
+ pf.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is the high-level driver for parallel port ATAPI disk
+ drives based on chips supported by the paride module.
+
+ By default, the driver will autoprobe for a single parallel
+ port ATAPI disk drive, but if their individual parameters are
+ specified, the driver can handle up to 4 drives.
+
+ The behaviour of the pf driver can be altered by setting
+ some parameters from the insmod command line. The following
+ parameters are adjustable:
+
+ drive0 These four arguments can be arrays of
+ drive1 1-7 integers as follows:
+ drive2
+ drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly>
+
+ Where,
+
+ <prt> is the base of the parallel port address for
+ the corresponding drive. (required)
+
+ <pro> is the protocol number for the adapter that
+ supports this drive. These numbers are
+ logged by 'paride' when the protocol modules
+ are initialised. (0 if not given)
+
+ <uni> for those adapters that support chained
+ devices, this is the unit selector for the
+ chain of devices on the given port. It should
+ be zero for devices that don't support chaining.
+ (0 if not given)
+
+ <mod> this can be -1 to choose the best mode, or one
+ of the mode numbers supported by the adapter.
+ (-1 if not given)
+
+ <slv> ATAPI CDroms can be jumpered to master or slave.
+ Set this to 0 to choose the master drive, 1 to
+ choose the slave, -1 (the default) to choose the
+ first drive found.
+
+ <lun> Some ATAPI devices support multiple LUNs.
+ One example is the ATAPI PD/CD drive from
+ Matshita/Panasonic. This device has a
+ CD drive on LUN 0 and a PD drive on LUN 1.
+ By default, the driver will search for the
+ first LUN with a supported device. Set
+ this parameter to force it to use a specific
+ LUN. (default -1)
+
+ <dly> some parallel ports require the driver to
+ go more slowly. -1 sets a default value that
+ should work with the chosen protocol. Otherwise,
+ set this to a small integer, the larger it is
+ the slower the port i/o. In some cases, setting
+ this to zero will speed up the device. (default -1)
+
+ major You may use this parameter to override the
+ default major number (47) that this driver
+ will use. Be sure to change the device
+ name as well.
+
+ name This parameter is a character string that
+ contains the name the kernel will use for this
+ device (in /proc output, for instance).
+ (default "pf").
+
+ cluster The driver will attempt to aggregate requests
+ for adjacent blocks into larger multi-block
+ clusters. The maximum cluster size (in 512
+ byte sectors) is set with this parameter.
+ (default 64)
+
+ verbose This parameter controls the amount of logging
+ that the driver will do. Set it to 0 for
+ normal operation, 1 to see autoprobe progress
+ messages, or 2 to see additional debugging
+ output. (default 0)
+
+ nice This parameter controls the driver's use of
+ idle CPU time, at the expense of some speed.
+
+ If this driver is built into the kernel, you can use the
+ following command line parameters, with the same values
+ as the corresponding module parameters listed above:
+
+ pf.drive0
+ pf.drive1
+ pf.drive2
+ pf.drive3
+ pf.cluster
+ pf.nice
+
+ In addition, you can use the parameter pf.disable to disable
+ the driver entirely.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.03 Changes for SMP. Eliminate sti().
+ Fix for drives that don't clear STAT_ERR
+ until after next CDB delivered.
+ Small change in pf_completion to round
+ up transfer size.
+ 1.02 GRG 1998.06.16 Eliminated an Ugh
+ 1.03 GRG 1998.08.16 Use HZ in loop timings, extra debugging
+ 1.04 GRG 1998.09.24 Added jumbo support
+
+*/
+
+#define PF_VERSION "1.04"
+#define PF_MAJOR 47
+#define PF_NAME "pf"
+#define PF_UNITS 4
+
+#include <linux/types.h>
+
+/* Here are things one can override from the insmod command.
+ Most are autoprobed by paride unless set here. Verbose is off
+ by default.
+
+*/
+
+static bool verbose = 0;
+static int major = PF_MAJOR;
+static char *name = PF_NAME;
+static int cluster = 64;
+static int nice = 0;
+static int disable = 0;
+
+static int drive0[7] = { 0, 0, 0, -1, -1, -1, -1 };
+static int drive1[7] = { 0, 0, 0, -1, -1, -1, -1 };
+static int drive2[7] = { 0, 0, 0, -1, -1, -1, -1 };
+static int drive3[7] = { 0, 0, 0, -1, -1, -1, -1 };
+
+static int (*drives[4])[7] = {&drive0, &drive1, &drive2, &drive3};
+static int pf_drive_count;
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY};
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/cdrom.h>
+#include <linux/spinlock.h>
+#include <linux/blk-mq.h>
+#include <linux/blkpg.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+static DEFINE_MUTEX(pf_mutex);
+static DEFINE_SPINLOCK(pf_spin_lock);
+
+module_param(verbose, bool, 0644);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param(cluster, int, 0);
+module_param(nice, int, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+#include "pseudo.h"
+
+/* constants for faking geometry numbers */
+
+#define PF_FD_MAX 8192 /* use FD geometry under this size */
+#define PF_FD_HDS 2
+#define PF_FD_SPT 18
+#define PF_HD_HDS 64
+#define PF_HD_SPT 32
+
+#define PF_MAX_RETRIES 5
+#define PF_TMO 800 /* interrupt timeout in jiffies */
+#define PF_SPIN_DEL 50 /* spin delay in micro-seconds */
+
+#define PF_SPIN (1000000*PF_TMO)/(HZ*PF_SPIN_DEL)
+
+#define STAT_ERR 0x00001
+#define STAT_INDEX 0x00002
+#define STAT_ECC 0x00004
+#define STAT_DRQ 0x00008
+#define STAT_SEEK 0x00010
+#define STAT_WRERR 0x00020
+#define STAT_READY 0x00040
+#define STAT_BUSY 0x00080
+
+#define ATAPI_REQ_SENSE 0x03
+#define ATAPI_LOCK 0x1e
+#define ATAPI_DOOR 0x1b
+#define ATAPI_MODE_SENSE 0x5a
+#define ATAPI_CAPACITY 0x25
+#define ATAPI_IDENTIFY 0x12
+#define ATAPI_READ_10 0x28
+#define ATAPI_WRITE_10 0x2a
+
+static int pf_open(struct block_device *bdev, fmode_t mode);
+static blk_status_t pf_queue_rq(struct blk_mq_hw_ctx *hctx,
+ const struct blk_mq_queue_data *bd);
+static int pf_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg);
+static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo);
+
+static void pf_release(struct gendisk *disk, fmode_t mode);
+
+static void do_pf_read(void);
+static void do_pf_read_start(void);
+static void do_pf_write(void);
+static void do_pf_write_start(void);
+static void do_pf_read_drq(void);
+static void do_pf_write_done(void);
+
+#define PF_NM 0
+#define PF_RO 1
+#define PF_RW 2
+
+#define PF_NAMELEN 8
+
+struct pf_unit {
+ struct pi_adapter pia; /* interface to paride layer */
+ struct pi_adapter *pi;
+ int removable; /* removable media device ? */
+ int media_status; /* media present ? WP ? */
+ int drive; /* drive */
+ int lun;
+ int access; /* count of active opens ... */
+ int present; /* device present ? */
+ char name[PF_NAMELEN]; /* pf0, pf1, ... */
+ struct gendisk *disk;
+ struct blk_mq_tag_set tag_set;
+ struct list_head rq_list;
+};
+
+static struct pf_unit units[PF_UNITS];
+
+static int pf_identify(struct pf_unit *pf);
+static void pf_lock(struct pf_unit *pf, int func);
+static void pf_eject(struct pf_unit *pf);
+static unsigned int pf_check_events(struct gendisk *disk,
+ unsigned int clearing);
+
+static char pf_scratch[512]; /* scratch block buffer */
+
+/* the variables below are used mainly in the I/O request engine, which
+ processes only one request at a time.
+*/
+
+static int pf_retries = 0; /* i/o error retry count */
+static int pf_busy = 0; /* request being processed ? */
+static struct request *pf_req; /* current request */
+static int pf_block; /* address of next requested block */
+static int pf_count; /* number of blocks still to do */
+static int pf_run; /* sectors in current cluster */
+static int pf_cmd; /* current command READ/WRITE */
+static struct pf_unit *pf_current;/* unit of current request */
+static int pf_mask; /* stopper for pseudo-int */
+static char *pf_buf; /* buffer for request in progress */
+static void *par_drv; /* reference of parport driver */
+
+/* kernel glue structures */
+
+static const struct block_device_operations pf_fops = {
+ .owner = THIS_MODULE,
+ .open = pf_open,
+ .release = pf_release,
+ .ioctl = pf_ioctl,
+ .compat_ioctl = pf_ioctl,
+ .getgeo = pf_getgeo,
+ .check_events = pf_check_events,
+};
+
+static const struct blk_mq_ops pf_mq_ops = {
+ .queue_rq = pf_queue_rq,
+};
+
+static int pf_open(struct block_device *bdev, fmode_t mode)
+{
+ struct pf_unit *pf = bdev->bd_disk->private_data;
+ int ret;
+
+ mutex_lock(&pf_mutex);
+ pf_identify(pf);
+
+ ret = -ENODEV;
+ if (pf->media_status == PF_NM)
+ goto out;
+
+ ret = -EROFS;
+ if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE))
+ goto out;
+
+ ret = 0;
+ pf->access++;
+ if (pf->removable)
+ pf_lock(pf, 1);
+out:
+ mutex_unlock(&pf_mutex);
+ return ret;
+}
+
+static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+ struct pf_unit *pf = bdev->bd_disk->private_data;
+ sector_t capacity = get_capacity(pf->disk);
+
+ if (capacity < PF_FD_MAX) {
+ geo->cylinders = sector_div(capacity, PF_FD_HDS * PF_FD_SPT);
+ geo->heads = PF_FD_HDS;
+ geo->sectors = PF_FD_SPT;
+ } else {
+ geo->cylinders = sector_div(capacity, PF_HD_HDS * PF_HD_SPT);
+ geo->heads = PF_HD_HDS;
+ geo->sectors = PF_HD_SPT;
+ }
+
+ return 0;
+}
+
+static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
+{
+ struct pf_unit *pf = bdev->bd_disk->private_data;
+
+ if (cmd != CDROMEJECT)
+ return -EINVAL;
+
+ if (pf->access != 1)
+ return -EBUSY;
+ mutex_lock(&pf_mutex);
+ pf_eject(pf);
+ mutex_unlock(&pf_mutex);
+
+ return 0;
+}
+
+static void pf_release(struct gendisk *disk, fmode_t mode)
+{
+ struct pf_unit *pf = disk->private_data;
+
+ mutex_lock(&pf_mutex);
+ if (pf->access <= 0) {
+ mutex_unlock(&pf_mutex);
+ WARN_ON(1);
+ return;
+ }
+
+ pf->access--;
+
+ if (!pf->access && pf->removable)
+ pf_lock(pf, 0);
+
+ mutex_unlock(&pf_mutex);
+}
+
+static unsigned int pf_check_events(struct gendisk *disk, unsigned int clearing)
+{
+ return DISK_EVENT_MEDIA_CHANGE;
+}
+
+static inline int status_reg(struct pf_unit *pf)
+{
+ return pi_read_regr(pf->pi, 1, 6);
+}
+
+static inline int read_reg(struct pf_unit *pf, int reg)
+{
+ return pi_read_regr(pf->pi, 0, reg);
+}
+
+static inline void write_reg(struct pf_unit *pf, int reg, int val)
+{
+ pi_write_regr(pf->pi, 0, reg, val);
+}
+
+static int pf_wait(struct pf_unit *pf, int go, int stop, char *fun, char *msg)
+{
+ int j, r, e, s, p;
+
+ j = 0;
+ while ((((r = status_reg(pf)) & go) || (stop && (!(r & stop))))
+ && (j++ < PF_SPIN))
+ udelay(PF_SPIN_DEL);
+
+ if ((r & (STAT_ERR & stop)) || (j > PF_SPIN)) {
+ s = read_reg(pf, 7);
+ e = read_reg(pf, 1);
+ p = read_reg(pf, 2);
+ if (j > PF_SPIN)
+ e |= 0x100;
+ if (fun)
+ printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
+ " loop=%d phase=%d\n",
+ pf->name, fun, msg, r, s, e, j, p);
+ return (e << 8) + s;
+ }
+ return 0;
+}
+
+static int pf_command(struct pf_unit *pf, char *cmd, int dlen, char *fun)
+{
+ pi_connect(pf->pi);
+
+ write_reg(pf, 6, 0xa0+0x10*pf->drive);
+
+ if (pf_wait(pf, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) {
+ pi_disconnect(pf->pi);
+ return -1;
+ }
+
+ write_reg(pf, 4, dlen % 256);
+ write_reg(pf, 5, dlen / 256);
+ write_reg(pf, 7, 0xa0); /* ATAPI packet command */
+
+ if (pf_wait(pf, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) {
+ pi_disconnect(pf->pi);
+ return -1;
+ }
+
+ if (read_reg(pf, 2) != 1) {
+ printk("%s: %s: command phase error\n", pf->name, fun);
+ pi_disconnect(pf->pi);
+ return -1;
+ }
+
+ pi_write_block(pf->pi, cmd, 12);
+
+ return 0;
+}
+
+static int pf_completion(struct pf_unit *pf, char *buf, char *fun)
+{
+ int r, s, n;
+
+ r = pf_wait(pf, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+ fun, "completion");
+
+ if ((read_reg(pf, 2) & 2) && (read_reg(pf, 7) & STAT_DRQ)) {
+ n = (((read_reg(pf, 4) + 256 * read_reg(pf, 5)) +
+ 3) & 0xfffc);
+ pi_read_block(pf->pi, buf, n);
+ }
+
+ s = pf_wait(pf, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done");
+
+ pi_disconnect(pf->pi);
+
+ return (r ? r : s);
+}
+
+static void pf_req_sense(struct pf_unit *pf, int quiet)
+{
+ char rs_cmd[12] =
+ { ATAPI_REQ_SENSE, pf->lun << 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
+ char buf[16];
+ int r;
+
+ r = pf_command(pf, rs_cmd, 16, "Request sense");
+ mdelay(1);
+ if (!r)
+ pf_completion(pf, buf, "Request sense");
+
+ if ((!r) && (!quiet))
+ printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
+ pf->name, buf[2] & 0xf, buf[12], buf[13]);
+}
+
+static int pf_atapi(struct pf_unit *pf, char *cmd, int dlen, char *buf, char *fun)
+{
+ int r;
+
+ r = pf_command(pf, cmd, dlen, fun);
+ mdelay(1);
+ if (!r)
+ r = pf_completion(pf, buf, fun);
+ if (r)
+ pf_req_sense(pf, !fun);
+
+ return r;
+}
+
+static void pf_lock(struct pf_unit *pf, int func)
+{
+ char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 };
+
+ pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock");
+}
+
+static void pf_eject(struct pf_unit *pf)
+{
+ char ej_cmd[12] = { ATAPI_DOOR, pf->lun << 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 };
+
+ pf_lock(pf, 0);
+ pf_atapi(pf, ej_cmd, 0, pf_scratch, "eject");
+}
+
+#define PF_RESET_TMO 30 /* in tenths of a second */
+
+static void pf_sleep(int cs)
+{
+ schedule_timeout_interruptible(cs);
+}
+
+/* the ATAPI standard actually specifies the contents of all 7 registers
+ after a reset, but the specification is ambiguous concerning the last
+ two bytes, and different drives interpret the standard differently.
+ */
+
+static int pf_reset(struct pf_unit *pf)
+{
+ int i, k, flg;
+ int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+
+ pi_connect(pf->pi);
+ write_reg(pf, 6, 0xa0+0x10*pf->drive);
+ write_reg(pf, 7, 8);
+
+ pf_sleep(20 * HZ / 1000);
+
+ k = 0;
+ while ((k++ < PF_RESET_TMO) && (status_reg(pf) & STAT_BUSY))
+ pf_sleep(HZ / 10);
+
+ flg = 1;
+ for (i = 0; i < 5; i++)
+ flg &= (read_reg(pf, i + 1) == expect[i]);
+
+ if (verbose) {
+ printk("%s: Reset (%d) signature = ", pf->name, k);
+ for (i = 0; i < 5; i++)
+ printk("%3x", read_reg(pf, i + 1));
+ if (!flg)
+ printk(" (incorrect)");
+ printk("\n");
+ }
+
+ pi_disconnect(pf->pi);
+ return flg - 1;
+}
+
+static void pf_mode_sense(struct pf_unit *pf)
+{
+ char ms_cmd[12] =
+ { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 };
+ char buf[8];
+
+ pf_atapi(pf, ms_cmd, 8, buf, "mode sense");
+ pf->media_status = PF_RW;
+ if (buf[3] & 0x80)
+ pf->media_status = PF_RO;
+}
+
+static void xs(char *buf, char *targ, int offs, int len)
+{
+ int j, k, l;
+
+ j = 0;
+ l = 0;
+ for (k = 0; k < len; k++)
+ if ((buf[k + offs] != 0x20) || (buf[k + offs] != l))
+ l = targ[j++] = buf[k + offs];
+ if (l == 0x20)
+ j--;
+ targ[j] = 0;
+}
+
+static int xl(char *buf, int offs)
+{
+ int v, k;
+
+ v = 0;
+ for (k = 0; k < 4; k++)
+ v = v * 256 + (buf[k + offs] & 0xff);
+ return v;
+}
+
+static void pf_get_capacity(struct pf_unit *pf)
+{
+ char rc_cmd[12] = { ATAPI_CAPACITY, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ char buf[8];
+ int bs;
+
+ if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) {
+ pf->media_status = PF_NM;
+ return;
+ }
+ set_capacity(pf->disk, xl(buf, 0) + 1);
+ bs = xl(buf, 4);
+ if (bs != 512) {
+ set_capacity(pf->disk, 0);
+ if (verbose)
+ printk("%s: Drive %d, LUN %d,"
+ " unsupported block size %d\n",
+ pf->name, pf->drive, pf->lun, bs);
+ }
+}
+
+static int pf_identify(struct pf_unit *pf)
+{
+ int dt, s;
+ char *ms[2] = { "master", "slave" };
+ char mf[10], id[18];
+ char id_cmd[12] =
+ { ATAPI_IDENTIFY, pf->lun << 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+ char buf[36];
+
+ s = pf_atapi(pf, id_cmd, 36, buf, "identify");
+ if (s)
+ return -1;
+
+ dt = buf[0] & 0x1f;
+ if ((dt != 0) && (dt != 7)) {
+ if (verbose)
+ printk("%s: Drive %d, LUN %d, unsupported type %d\n",
+ pf->name, pf->drive, pf->lun, dt);
+ return -1;
+ }
+
+ xs(buf, mf, 8, 8);
+ xs(buf, id, 16, 16);
+
+ pf->removable = (buf[1] & 0x80);
+
+ pf_mode_sense(pf);
+ pf_mode_sense(pf);
+ pf_mode_sense(pf);
+
+ pf_get_capacity(pf);
+
+ printk("%s: %s %s, %s LUN %d, type %d",
+ pf->name, mf, id, ms[pf->drive], pf->lun, dt);
+ if (pf->removable)
+ printk(", removable");
+ if (pf->media_status == PF_NM)
+ printk(", no media\n");
+ else {
+ if (pf->media_status == PF_RO)
+ printk(", RO");
+ printk(", %llu blocks\n",
+ (unsigned long long)get_capacity(pf->disk));
+ }
+ return 0;
+}
+
+/*
+ * returns 0, with id set if drive is detected, otherwise an error code.
+ */
+static int pf_probe(struct pf_unit *pf)
+{
+ if (pf->drive == -1) {
+ for (pf->drive = 0; pf->drive <= 1; pf->drive++)
+ if (!pf_reset(pf)) {
+ if (pf->lun != -1)
+ return pf_identify(pf);
+ else
+ for (pf->lun = 0; pf->lun < 8; pf->lun++)
+ if (!pf_identify(pf))
+ return 0;
+ }
+ } else {
+ if (pf_reset(pf))
+ return -1;
+ if (pf->lun != -1)
+ return pf_identify(pf);
+ for (pf->lun = 0; pf->lun < 8; pf->lun++)
+ if (!pf_identify(pf))
+ return 0;
+ }
+ return -ENODEV;
+}
+
+/* The i/o request engine */
+
+static int pf_start(struct pf_unit *pf, int cmd, int b, int c)
+{
+ int i;
+ char io_cmd[12] = { cmd, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+
+ for (i = 0; i < 4; i++) {
+ io_cmd[5 - i] = b & 0xff;
+ b = b >> 8;
+ }
+
+ io_cmd[8] = c & 0xff;
+ io_cmd[7] = (c >> 8) & 0xff;
+
+ i = pf_command(pf, io_cmd, c * 512, "start i/o");
+
+ mdelay(1);
+
+ return i;
+}
+
+static int pf_ready(void)
+{
+ return (((status_reg(pf_current) & (STAT_BUSY | pf_mask)) == pf_mask));
+}
+
+static int pf_queue;
+
+static int set_next_request(void)
+{
+ struct pf_unit *pf;
+ int old_pos = pf_queue;
+
+ do {
+ pf = &units[pf_queue];
+ if (++pf_queue == PF_UNITS)
+ pf_queue = 0;
+ if (pf->present && !list_empty(&pf->rq_list)) {
+ pf_req = list_first_entry(&pf->rq_list, struct request,
+ queuelist);
+ list_del_init(&pf_req->queuelist);
+ blk_mq_start_request(pf_req);
+ break;
+ }
+ } while (pf_queue != old_pos);
+
+ return pf_req != NULL;
+}
+
+static void pf_end_request(blk_status_t err)
+{
+ if (!pf_req)
+ return;
+ if (!blk_update_request(pf_req, err, blk_rq_cur_bytes(pf_req))) {
+ __blk_mq_end_request(pf_req, err);
+ pf_req = NULL;
+ }
+}
+
+static void pf_request(void)
+{
+ if (pf_busy)
+ return;
+repeat:
+ if (!pf_req && !set_next_request())
+ return;
+
+ pf_current = pf_req->q->disk->private_data;
+ pf_block = blk_rq_pos(pf_req);
+ pf_run = blk_rq_sectors(pf_req);
+ pf_count = blk_rq_cur_sectors(pf_req);
+
+ if (pf_block + pf_count > get_capacity(pf_req->q->disk)) {
+ pf_end_request(BLK_STS_IOERR);
+ goto repeat;
+ }
+
+ pf_cmd = rq_data_dir(pf_req);
+ pf_buf = bio_data(pf_req->bio);
+ pf_retries = 0;
+
+ pf_busy = 1;
+ if (pf_cmd == READ)
+ pi_do_claimed(pf_current->pi, do_pf_read);
+ else if (pf_cmd == WRITE)
+ pi_do_claimed(pf_current->pi, do_pf_write);
+ else {
+ pf_busy = 0;
+ pf_end_request(BLK_STS_IOERR);
+ goto repeat;
+ }
+}
+
+static blk_status_t pf_queue_rq(struct blk_mq_hw_ctx *hctx,
+ const struct blk_mq_queue_data *bd)
+{
+ struct pf_unit *pf = hctx->queue->queuedata;
+
+ spin_lock_irq(&pf_spin_lock);
+ list_add_tail(&bd->rq->queuelist, &pf->rq_list);
+ pf_request();
+ spin_unlock_irq(&pf_spin_lock);
+
+ return BLK_STS_OK;
+}
+
+static int pf_next_buf(void)
+{
+ unsigned long saved_flags;
+
+ pf_count--;
+ pf_run--;
+ pf_buf += 512;
+ pf_block++;
+ if (!pf_run)
+ return 1;
+ if (!pf_count) {
+ spin_lock_irqsave(&pf_spin_lock, saved_flags);
+ pf_end_request(0);
+ spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
+ if (!pf_req)
+ return 1;
+ pf_count = blk_rq_cur_sectors(pf_req);
+ pf_buf = bio_data(pf_req->bio);
+ }
+ return 0;
+}
+
+static inline void next_request(blk_status_t err)
+{
+ unsigned long saved_flags;
+
+ spin_lock_irqsave(&pf_spin_lock, saved_flags);
+ pf_end_request(err);
+ pf_busy = 0;
+ pf_request();
+ spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
+}
+
+/* detach from the calling context - in case the spinlock is held */
+static void do_pf_read(void)
+{
+ ps_set_intr(do_pf_read_start, NULL, 0, nice);
+}
+
+static void do_pf_read_start(void)
+{
+ pf_busy = 1;
+
+ if (pf_start(pf_current, ATAPI_READ_10, pf_block, pf_run)) {
+ pi_disconnect(pf_current->pi);
+ if (pf_retries < PF_MAX_RETRIES) {
+ pf_retries++;
+ pi_do_claimed(pf_current->pi, do_pf_read_start);
+ return;
+ }
+ next_request(BLK_STS_IOERR);
+ return;
+ }
+ pf_mask = STAT_DRQ;
+ ps_set_intr(do_pf_read_drq, pf_ready, PF_TMO, nice);
+}
+
+static void do_pf_read_drq(void)
+{
+ while (1) {
+ if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
+ "read block", "completion") & STAT_ERR) {
+ pi_disconnect(pf_current->pi);
+ if (pf_retries < PF_MAX_RETRIES) {
+ pf_req_sense(pf_current, 0);
+ pf_retries++;
+ pi_do_claimed(pf_current->pi, do_pf_read_start);
+ return;
+ }
+ next_request(BLK_STS_IOERR);
+ return;
+ }
+ pi_read_block(pf_current->pi, pf_buf, 512);
+ if (pf_next_buf())
+ break;
+ }
+ pi_disconnect(pf_current->pi);
+ next_request(0);
+}
+
+static void do_pf_write(void)
+{
+ ps_set_intr(do_pf_write_start, NULL, 0, nice);
+}
+
+static void do_pf_write_start(void)
+{
+ pf_busy = 1;
+
+ if (pf_start(pf_current, ATAPI_WRITE_10, pf_block, pf_run)) {
+ pi_disconnect(pf_current->pi);
+ if (pf_retries < PF_MAX_RETRIES) {
+ pf_retries++;
+ pi_do_claimed(pf_current->pi, do_pf_write_start);
+ return;
+ }
+ next_request(BLK_STS_IOERR);
+ return;
+ }
+
+ while (1) {
+ if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
+ "write block", "data wait") & STAT_ERR) {
+ pi_disconnect(pf_current->pi);
+ if (pf_retries < PF_MAX_RETRIES) {
+ pf_retries++;
+ pi_do_claimed(pf_current->pi, do_pf_write_start);
+ return;
+ }
+ next_request(BLK_STS_IOERR);
+ return;
+ }
+ pi_write_block(pf_current->pi, pf_buf, 512);
+ if (pf_next_buf())
+ break;
+ }
+ pf_mask = 0;
+ ps_set_intr(do_pf_write_done, pf_ready, PF_TMO, nice);
+}
+
+static void do_pf_write_done(void)
+{
+ if (pf_wait(pf_current, STAT_BUSY, 0, "write block", "done") & STAT_ERR) {
+ pi_disconnect(pf_current->pi);
+ if (pf_retries < PF_MAX_RETRIES) {
+ pf_retries++;
+ pi_do_claimed(pf_current->pi, do_pf_write_start);
+ return;
+ }
+ next_request(BLK_STS_IOERR);
+ return;
+ }
+ pi_disconnect(pf_current->pi);
+ next_request(0);
+}
+
+static int __init pf_init_unit(struct pf_unit *pf, bool autoprobe, int port,
+ int mode, int unit, int protocol, int delay, int ms)
+{
+ struct gendisk *disk;
+ int ret;
+
+ ret = blk_mq_alloc_sq_tag_set(&pf->tag_set, &pf_mq_ops, 1,
+ BLK_MQ_F_SHOULD_MERGE);
+ if (ret)
+ return ret;
+
+ disk = blk_mq_alloc_disk(&pf->tag_set, pf);
+ if (IS_ERR(disk)) {
+ ret = PTR_ERR(disk);
+ goto out_free_tag_set;
+ }
+ disk->major = major;
+ disk->first_minor = pf - units;
+ disk->minors = 1;
+ strcpy(disk->disk_name, pf->name);
+ disk->fops = &pf_fops;
+ disk->flags |= GENHD_FL_NO_PART;
+ disk->events = DISK_EVENT_MEDIA_CHANGE;
+ disk->private_data = pf;
+
+ blk_queue_max_segments(disk->queue, cluster);
+ blk_queue_bounce_limit(disk->queue, BLK_BOUNCE_HIGH);
+
+ INIT_LIST_HEAD(&pf->rq_list);
+ pf->disk = disk;
+ pf->pi = &pf->pia;
+ pf->media_status = PF_NM;
+ pf->drive = (*drives[disk->first_minor])[D_SLV];
+ pf->lun = (*drives[disk->first_minor])[D_LUN];
+ snprintf(pf->name, PF_NAMELEN, "%s%d", name, disk->first_minor);
+
+ if (!pi_init(pf->pi, autoprobe, port, mode, unit, protocol, delay,
+ pf_scratch, PI_PF, verbose, pf->name)) {
+ ret = -ENODEV;
+ goto out_free_disk;
+ }
+ ret = pf_probe(pf);
+ if (ret)
+ goto out_pi_release;
+
+ ret = add_disk(disk);
+ if (ret)
+ goto out_pi_release;
+ pf->present = 1;
+ return 0;
+
+out_pi_release:
+ pi_release(pf->pi);
+out_free_disk:
+ put_disk(pf->disk);
+out_free_tag_set:
+ blk_mq_free_tag_set(&pf->tag_set);
+ return ret;
+}
+
+static int __init pf_init(void)
+{ /* preliminary initialisation */
+ struct pf_unit *pf;
+ int found = 0, unit;
+
+ if (disable)
+ return -EINVAL;
+
+ if (register_blkdev(major, name))
+ return -EBUSY;
+
+ printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
+ name, name, PF_VERSION, major, cluster, nice);
+
+ par_drv = pi_register_driver(name);
+ if (!par_drv) {
+ pr_err("failed to register %s driver\n", name);
+ goto out_unregister_blkdev;
+ }
+
+ for (unit = 0; unit < PF_UNITS; unit++) {
+ if (!(*drives[unit])[D_PRT])
+ pf_drive_count++;
+ }
+
+ pf = units;
+ if (pf_drive_count == 0) {
+ if (pf_init_unit(pf, 1, -1, -1, -1, -1, -1, verbose))
+ found++;
+ } else {
+ for (unit = 0; unit < PF_UNITS; unit++, pf++) {
+ int *conf = *drives[unit];
+ if (!conf[D_PRT])
+ continue;
+ if (pf_init_unit(pf, 0, conf[D_PRT], conf[D_MOD],
+ conf[D_UNI], conf[D_PRO], conf[D_DLY],
+ verbose))
+ found++;
+ }
+ }
+ if (!found) {
+ printk("%s: No ATAPI disk detected\n", name);
+ goto out_unregister_pi_driver;
+ }
+ pf_busy = 0;
+ return 0;
+
+out_unregister_pi_driver:
+ pi_unregister_driver(par_drv);
+out_unregister_blkdev:
+ unregister_blkdev(major, name);
+ return -ENODEV;
+}
+
+static void __exit pf_exit(void)
+{
+ struct pf_unit *pf;
+ int unit;
+
+ for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
+ if (!pf->present)
+ continue;
+ del_gendisk(pf->disk);
+ put_disk(pf->disk);
+ blk_mq_free_tag_set(&pf->tag_set);
+ pi_release(pf->pi);
+ }
+
+ unregister_blkdev(major, name);
+}
+
+MODULE_LICENSE("GPL");
+module_init(pf_init)
+module_exit(pf_exit)
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
new file mode 100644
index 000000000..3b5882bfb
--- /dev/null
+++ b/drivers/block/paride/pg.c
@@ -0,0 +1,734 @@
+/*
+ pg.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ The pg driver provides a simple character device interface for
+ sending ATAPI commands to a device. With the exception of the
+ ATAPI reset operation, all operations are performed by a pair
+ of read and write operations to the appropriate /dev/pgN device.
+ A write operation delivers a command and any outbound data in
+ a single buffer. Normally, the write will succeed unless the
+ device is offline or malfunctioning, or there is already another
+ command pending. If the write succeeds, it should be followed
+ immediately by a read operation, to obtain any returned data and
+ status information. A read will fail if there is no operation
+ in progress.
+
+ As a special case, the device can be reset with a write operation,
+ and in this case, no following read is expected, or permitted.
+
+ There are no ioctl() operations. Any single operation
+ may transfer at most PG_MAX_DATA bytes. Note that the driver must
+ copy the data through an internal buffer. In keeping with all
+ current ATAPI devices, command packets are assumed to be exactly
+ 12 bytes in length.
+
+ To permit future changes to this interface, the headers in the
+ read and write buffers contain a single character "magic" flag.
+ Currently this flag must be the character "P".
+
+ By default, the driver will autoprobe for a single parallel
+ port ATAPI device, but if their individual parameters are
+ specified, the driver can handle up to 4 devices.
+
+ To use this device, you must have the following device
+ special files defined:
+
+ /dev/pg0 c 97 0
+ /dev/pg1 c 97 1
+ /dev/pg2 c 97 2
+ /dev/pg3 c 97 3
+
+ (You'll need to change the 97 to something else if you use
+ the 'major' parameter to install the driver on a different
+ major number.)
+
+ The behaviour of the pg driver can be altered by setting
+ some parameters from the insmod command line. The following
+ parameters are adjustable:
+
+ drive0 These four arguments can be arrays of
+ drive1 1-6 integers as follows:
+ drive2
+ drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
+
+ Where,
+
+ <prt> is the base of the parallel port address for
+ the corresponding drive. (required)
+
+ <pro> is the protocol number for the adapter that
+ supports this drive. These numbers are
+ logged by 'paride' when the protocol modules
+ are initialised. (0 if not given)
+
+ <uni> for those adapters that support chained
+ devices, this is the unit selector for the
+ chain of devices on the given port. It should
+ be zero for devices that don't support chaining.
+ (0 if not given)
+
+ <mod> this can be -1 to choose the best mode, or one
+ of the mode numbers supported by the adapter.
+ (-1 if not given)
+
+ <slv> ATAPI devices can be jumpered to master or slave.
+ Set this to 0 to choose the master drive, 1 to
+ choose the slave, -1 (the default) to choose the
+ first drive found.
+
+ <dly> some parallel ports require the driver to
+ go more slowly. -1 sets a default value that
+ should work with the chosen protocol. Otherwise,
+ set this to a small integer, the larger it is
+ the slower the port i/o. In some cases, setting
+ this to zero will speed up the device. (default -1)
+
+ major You may use this parameter to override the
+ default major number (97) that this driver
+ will use. Be sure to change the device
+ name as well.
+
+ name This parameter is a character string that
+ contains the name the kernel will use for this
+ device (in /proc output, for instance).
+ (default "pg").
+
+ verbose This parameter controls the amount of logging
+ that is done by the driver. Set it to 0 for
+ quiet operation, to 1 to enable progress
+ messages while the driver probes for devices,
+ or to 2 for full debug logging. (default 0)
+
+ If this driver is built into the kernel, you can use
+ the following command line parameters, with the same values
+ as the corresponding module parameters listed above:
+
+ pg.drive0
+ pg.drive1
+ pg.drive2
+ pg.drive3
+
+ In addition, you can use the parameter pg.disable to disable
+ the driver entirely.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.06.16 Bug fixes
+ 1.02 GRG 1998.09.24 Added jumbo support
+
+*/
+
+#define PG_VERSION "1.02"
+#define PG_MAJOR 97
+#define PG_NAME "pg"
+#define PG_UNITS 4
+
+#ifndef PI_PG
+#define PI_PG 4
+#endif
+
+#include <linux/types.h>
+/* Here are things one can override from the insmod command.
+ Most are autoprobed by paride unless set here. Verbose is 0
+ by default.
+
+*/
+
+static int verbose;
+static int major = PG_MAJOR;
+static char *name = PG_NAME;
+static int disable = 0;
+
+static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
+
+static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
+static int pg_drive_count;
+
+enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY};
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mtio.h>
+#include <linux/pg.h>
+#include <linux/device.h>
+#include <linux/sched.h> /* current, TASK_* */
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+
+#include <linux/uaccess.h>
+
+module_param(verbose, int, 0644);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+
+#define PG_SPIN_DEL 50 /* spin delay in micro-seconds */
+#define PG_SPIN 200
+#define PG_TMO HZ
+#define PG_RESET_TMO 10*HZ
+
+#define STAT_ERR 0x01
+#define STAT_INDEX 0x02
+#define STAT_ECC 0x04
+#define STAT_DRQ 0x08
+#define STAT_SEEK 0x10
+#define STAT_WRERR 0x20
+#define STAT_READY 0x40
+#define STAT_BUSY 0x80
+
+#define ATAPI_IDENTIFY 0x12
+
+static DEFINE_MUTEX(pg_mutex);
+static int pg_open(struct inode *inode, struct file *file);
+static int pg_release(struct inode *inode, struct file *file);
+static ssize_t pg_read(struct file *filp, char __user *buf,
+ size_t count, loff_t * ppos);
+static ssize_t pg_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t * ppos);
+static int pg_detect(void);
+
+#define PG_NAMELEN 8
+
+struct pg {
+ struct pi_adapter pia; /* interface to paride layer */
+ struct pi_adapter *pi;
+ int busy; /* write done, read expected */
+ int start; /* jiffies at command start */
+ int dlen; /* transfer size requested */
+ unsigned long timeout; /* timeout requested */
+ int status; /* last sense key */
+ int drive; /* drive */
+ unsigned long access; /* count of active opens ... */
+ int present; /* device present ? */
+ char *bufptr;
+ char name[PG_NAMELEN]; /* pg0, pg1, ... */
+};
+
+static struct pg devices[PG_UNITS];
+
+static int pg_identify(struct pg *dev, int log);
+
+static char pg_scratch[512]; /* scratch block buffer */
+
+static struct class *pg_class;
+static void *par_drv; /* reference of parport driver */
+
+/* kernel glue structures */
+
+static const struct file_operations pg_fops = {
+ .owner = THIS_MODULE,
+ .read = pg_read,
+ .write = pg_write,
+ .open = pg_open,
+ .release = pg_release,
+ .llseek = noop_llseek,
+};
+
+static void pg_init_units(void)
+{
+ int unit;
+
+ pg_drive_count = 0;
+ for (unit = 0; unit < PG_UNITS; unit++) {
+ int *parm = *drives[unit];
+ struct pg *dev = &devices[unit];
+ dev->pi = &dev->pia;
+ clear_bit(0, &dev->access);
+ dev->busy = 0;
+ dev->present = 0;
+ dev->bufptr = NULL;
+ dev->drive = parm[D_SLV];
+ snprintf(dev->name, PG_NAMELEN, "%s%c", name, 'a'+unit);
+ if (parm[D_PRT])
+ pg_drive_count++;
+ }
+}
+
+static inline int status_reg(struct pg *dev)
+{
+ return pi_read_regr(dev->pi, 1, 6);
+}
+
+static inline int read_reg(struct pg *dev, int reg)
+{
+ return pi_read_regr(dev->pi, 0, reg);
+}
+
+static inline void write_reg(struct pg *dev, int reg, int val)
+{
+ pi_write_regr(dev->pi, 0, reg, val);
+}
+
+static inline u8 DRIVE(struct pg *dev)
+{
+ return 0xa0+0x10*dev->drive;
+}
+
+static void pg_sleep(int cs)
+{
+ schedule_timeout_interruptible(cs);
+}
+
+static int pg_wait(struct pg *dev, int go, int stop, unsigned long tmo, char *msg)
+{
+ int j, r, e, s, p, to;
+
+ dev->status = 0;
+
+ j = 0;
+ while ((((r = status_reg(dev)) & go) || (stop && (!(r & stop))))
+ && time_before(jiffies, tmo)) {
+ if (j++ < PG_SPIN)
+ udelay(PG_SPIN_DEL);
+ else
+ pg_sleep(1);
+ }
+
+ to = time_after_eq(jiffies, tmo);
+
+ if ((r & (STAT_ERR & stop)) || to) {
+ s = read_reg(dev, 7);
+ e = read_reg(dev, 1);
+ p = read_reg(dev, 2);
+ if (verbose > 1)
+ printk("%s: %s: stat=0x%x err=0x%x phase=%d%s\n",
+ dev->name, msg, s, e, p, to ? " timeout" : "");
+ if (to)
+ e |= 0x100;
+ dev->status = (e >> 4) & 0xff;
+ return -1;
+ }
+ return 0;
+}
+
+static int pg_command(struct pg *dev, char *cmd, int dlen, unsigned long tmo)
+{
+ int k;
+
+ pi_connect(dev->pi);
+
+ write_reg(dev, 6, DRIVE(dev));
+
+ if (pg_wait(dev, STAT_BUSY | STAT_DRQ, 0, tmo, "before command"))
+ goto fail;
+
+ write_reg(dev, 4, dlen % 256);
+ write_reg(dev, 5, dlen / 256);
+ write_reg(dev, 7, 0xa0); /* ATAPI packet command */
+
+ if (pg_wait(dev, STAT_BUSY, STAT_DRQ, tmo, "command DRQ"))
+ goto fail;
+
+ if (read_reg(dev, 2) != 1) {
+ printk("%s: command phase error\n", dev->name);
+ goto fail;
+ }
+
+ pi_write_block(dev->pi, cmd, 12);
+
+ if (verbose > 1) {
+ printk("%s: Command sent, dlen=%d packet= ", dev->name, dlen);
+ for (k = 0; k < 12; k++)
+ printk("%02x ", cmd[k] & 0xff);
+ printk("\n");
+ }
+ return 0;
+fail:
+ pi_disconnect(dev->pi);
+ return -1;
+}
+
+static int pg_completion(struct pg *dev, char *buf, unsigned long tmo)
+{
+ int r, d, n, p;
+
+ r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+ tmo, "completion");
+
+ dev->dlen = 0;
+
+ while (read_reg(dev, 7) & STAT_DRQ) {
+ d = (read_reg(dev, 4) + 256 * read_reg(dev, 5));
+ n = ((d + 3) & 0xfffc);
+ p = read_reg(dev, 2) & 3;
+ if (p == 0)
+ pi_write_block(dev->pi, buf, n);
+ if (p == 2)
+ pi_read_block(dev->pi, buf, n);
+ if (verbose > 1)
+ printk("%s: %s %d bytes\n", dev->name,
+ p ? "Read" : "Write", n);
+ dev->dlen += (1 - p) * d;
+ buf += d;
+ r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+ tmo, "completion");
+ }
+
+ pi_disconnect(dev->pi);
+
+ return r;
+}
+
+static int pg_reset(struct pg *dev)
+{
+ int i, k, err;
+ int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+ int got[5];
+
+ pi_connect(dev->pi);
+ write_reg(dev, 6, DRIVE(dev));
+ write_reg(dev, 7, 8);
+
+ pg_sleep(20 * HZ / 1000);
+
+ k = 0;
+ while ((k++ < PG_RESET_TMO) && (status_reg(dev) & STAT_BUSY))
+ pg_sleep(1);
+
+ for (i = 0; i < 5; i++)
+ got[i] = read_reg(dev, i + 1);
+
+ err = memcmp(expect, got, sizeof(got)) ? -1 : 0;
+
+ if (verbose) {
+ printk("%s: Reset (%d) signature = ", dev->name, k);
+ for (i = 0; i < 5; i++)
+ printk("%3x", got[i]);
+ if (err)
+ printk(" (incorrect)");
+ printk("\n");
+ }
+
+ pi_disconnect(dev->pi);
+ return err;
+}
+
+static void xs(char *buf, char *targ, int len)
+{
+ char l = '\0';
+ int k;
+
+ for (k = 0; k < len; k++) {
+ char c = *buf++;
+ if (c != ' ' && c != l)
+ l = *targ++ = c;
+ }
+ if (l == ' ')
+ targ--;
+ *targ = '\0';
+}
+
+static int pg_identify(struct pg *dev, int log)
+{
+ int s;
+ char *ms[2] = { "master", "slave" };
+ char mf[10], id[18];
+ char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+ char buf[36];
+
+ s = pg_command(dev, id_cmd, 36, jiffies + PG_TMO);
+ if (s)
+ return -1;
+ s = pg_completion(dev, buf, jiffies + PG_TMO);
+ if (s)
+ return -1;
+
+ if (log) {
+ xs(buf + 8, mf, 8);
+ xs(buf + 16, id, 16);
+ printk("%s: %s %s, %s\n", dev->name, mf, id, ms[dev->drive]);
+ }
+
+ return 0;
+}
+
+/*
+ * returns 0, with id set if drive is detected
+ * -1, if drive detection failed
+ */
+static int pg_probe(struct pg *dev)
+{
+ if (dev->drive == -1) {
+ for (dev->drive = 0; dev->drive <= 1; dev->drive++)
+ if (!pg_reset(dev))
+ return pg_identify(dev, 1);
+ } else {
+ if (!pg_reset(dev))
+ return pg_identify(dev, 1);
+ }
+ return -1;
+}
+
+static int pg_detect(void)
+{
+ struct pg *dev = &devices[0];
+ int k, unit;
+
+ printk("%s: %s version %s, major %d\n", name, name, PG_VERSION, major);
+
+ par_drv = pi_register_driver(name);
+ if (!par_drv) {
+ pr_err("failed to register %s driver\n", name);
+ return -1;
+ }
+
+ k = 0;
+ if (pg_drive_count == 0) {
+ if (pi_init(dev->pi, 1, -1, -1, -1, -1, -1, pg_scratch,
+ PI_PG, verbose, dev->name)) {
+ if (!pg_probe(dev)) {
+ dev->present = 1;
+ k++;
+ } else
+ pi_release(dev->pi);
+ }
+
+ } else
+ for (unit = 0; unit < PG_UNITS; unit++, dev++) {
+ int *parm = *drives[unit];
+ if (!parm[D_PRT])
+ continue;
+ if (pi_init(dev->pi, 0, parm[D_PRT], parm[D_MOD],
+ parm[D_UNI], parm[D_PRO], parm[D_DLY],
+ pg_scratch, PI_PG, verbose, dev->name)) {
+ if (!pg_probe(dev)) {
+ dev->present = 1;
+ k++;
+ } else
+ pi_release(dev->pi);
+ }
+ }
+
+ if (k)
+ return 0;
+
+ pi_unregister_driver(par_drv);
+ printk("%s: No ATAPI device detected\n", name);
+ return -1;
+}
+
+static int pg_open(struct inode *inode, struct file *file)
+{
+ int unit = iminor(inode) & 0x7f;
+ struct pg *dev = &devices[unit];
+ int ret = 0;
+
+ mutex_lock(&pg_mutex);
+ if ((unit >= PG_UNITS) || (!dev->present)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (test_and_set_bit(0, &dev->access)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (dev->busy) {
+ pg_reset(dev);
+ dev->busy = 0;
+ }
+
+ pg_identify(dev, (verbose > 1));
+
+ dev->bufptr = kmalloc(PG_MAX_DATA, GFP_KERNEL);
+ if (dev->bufptr == NULL) {
+ clear_bit(0, &dev->access);
+ printk("%s: buffer allocation failed\n", dev->name);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ file->private_data = dev;
+
+out:
+ mutex_unlock(&pg_mutex);
+ return ret;
+}
+
+static int pg_release(struct inode *inode, struct file *file)
+{
+ struct pg *dev = file->private_data;
+
+ kfree(dev->bufptr);
+ dev->bufptr = NULL;
+ clear_bit(0, &dev->access);
+
+ return 0;
+}
+
+static ssize_t pg_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos)
+{
+ struct pg *dev = filp->private_data;
+ struct pg_write_hdr hdr;
+ int hs = sizeof (hdr);
+
+ if (dev->busy)
+ return -EBUSY;
+ if (count < hs)
+ return -EINVAL;
+
+ if (copy_from_user(&hdr, buf, hs))
+ return -EFAULT;
+
+ if (hdr.magic != PG_MAGIC)
+ return -EINVAL;
+ if (hdr.dlen < 0 || hdr.dlen > PG_MAX_DATA)
+ return -EINVAL;
+ if ((count - hs) > PG_MAX_DATA)
+ return -EINVAL;
+
+ if (hdr.func == PG_RESET) {
+ if (count != hs)
+ return -EINVAL;
+ if (pg_reset(dev))
+ return -EIO;
+ return count;
+ }
+
+ if (hdr.func != PG_COMMAND)
+ return -EINVAL;
+
+ dev->start = jiffies;
+ dev->timeout = hdr.timeout * HZ + HZ / 2 + jiffies;
+
+ if (pg_command(dev, hdr.packet, hdr.dlen, jiffies + PG_TMO)) {
+ if (dev->status & 0x10)
+ return -ETIME;
+ return -EIO;
+ }
+
+ dev->busy = 1;
+
+ if (copy_from_user(dev->bufptr, buf + hs, count - hs))
+ return -EFAULT;
+ return count;
+}
+
+static ssize_t pg_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
+{
+ struct pg *dev = filp->private_data;
+ struct pg_read_hdr hdr;
+ int hs = sizeof (hdr);
+ int copy;
+
+ if (!dev->busy)
+ return -EINVAL;
+ if (count < hs)
+ return -EINVAL;
+
+ dev->busy = 0;
+
+ if (pg_completion(dev, dev->bufptr, dev->timeout))
+ if (dev->status & 0x10)
+ return -ETIME;
+
+ memset(&hdr, 0, sizeof(hdr));
+ hdr.magic = PG_MAGIC;
+ hdr.dlen = dev->dlen;
+ copy = 0;
+
+ if (hdr.dlen < 0) {
+ hdr.dlen = -1 * hdr.dlen;
+ copy = hdr.dlen;
+ if (copy > (count - hs))
+ copy = count - hs;
+ }
+
+ hdr.duration = (jiffies - dev->start + HZ / 2) / HZ;
+ hdr.scsi = dev->status & 0x0f;
+
+ if (copy_to_user(buf, &hdr, hs))
+ return -EFAULT;
+ if (copy > 0)
+ if (copy_to_user(buf + hs, dev->bufptr, copy))
+ return -EFAULT;
+ return copy + hs;
+}
+
+static int __init pg_init(void)
+{
+ int unit;
+ int err;
+
+ if (disable){
+ err = -EINVAL;
+ goto out;
+ }
+
+ pg_init_units();
+
+ if (pg_detect()) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ err = register_chrdev(major, name, &pg_fops);
+ if (err < 0) {
+ printk("pg_init: unable to get major number %d\n", major);
+ for (unit = 0; unit < PG_UNITS; unit++) {
+ struct pg *dev = &devices[unit];
+ if (dev->present)
+ pi_release(dev->pi);
+ }
+ goto out;
+ }
+ major = err; /* In case the user specified `major=0' (dynamic) */
+ pg_class = class_create(THIS_MODULE, "pg");
+ if (IS_ERR(pg_class)) {
+ err = PTR_ERR(pg_class);
+ goto out_chrdev;
+ }
+ for (unit = 0; unit < PG_UNITS; unit++) {
+ struct pg *dev = &devices[unit];
+ if (dev->present)
+ device_create(pg_class, NULL, MKDEV(major, unit), NULL,
+ "pg%u", unit);
+ }
+ err = 0;
+ goto out;
+
+out_chrdev:
+ unregister_chrdev(major, "pg");
+out:
+ return err;
+}
+
+static void __exit pg_exit(void)
+{
+ int unit;
+
+ for (unit = 0; unit < PG_UNITS; unit++) {
+ struct pg *dev = &devices[unit];
+ if (dev->present)
+ device_destroy(pg_class, MKDEV(major, unit));
+ }
+ class_destroy(pg_class);
+ unregister_chrdev(major, name);
+
+ for (unit = 0; unit < PG_UNITS; unit++) {
+ struct pg *dev = &devices[unit];
+ if (dev->present)
+ pi_release(dev->pi);
+ }
+}
+
+MODULE_LICENSE("GPL");
+module_init(pg_init)
+module_exit(pg_exit)
diff --git a/drivers/block/paride/ppc6lnx.c b/drivers/block/paride/ppc6lnx.c
new file mode 100644
index 000000000..5e5521d3b
--- /dev/null
+++ b/drivers/block/paride/ppc6lnx.c
@@ -0,0 +1,726 @@
+/*
+ ppc6lnx.c (c) 2001 Micro Solutions Inc.
+ Released under the terms of the GNU General Public license
+
+ ppc6lnx.c is a par of the protocol driver for the Micro Solutions
+ "BACKPACK" parallel port IDE adapter
+ (Works on Series 6 drives)
+
+*/
+
+//***************************************************************************
+
+// PPC 6 Code in C sanitized for LINUX
+// Original x86 ASM by Ron, Converted to C by Clive
+
+//***************************************************************************
+
+
+#define port_stb 1
+#define port_afd 2
+#define cmd_stb port_afd
+#define port_init 4
+#define data_stb port_init
+#define port_sel 8
+#define port_int 16
+#define port_dir 0x20
+
+#define ECR_EPP 0x80
+#define ECR_BI 0x20
+
+//***************************************************************************
+
+// 60772 Commands
+
+#define ACCESS_REG 0x00
+#define ACCESS_PORT 0x40
+
+#define ACCESS_READ 0x00
+#define ACCESS_WRITE 0x20
+
+// 60772 Command Prefix
+
+#define CMD_PREFIX_SET 0xe0 // Special command that modifies the next command's operation
+#define CMD_PREFIX_RESET 0xc0 // Resets current cmd modifier reg bits
+ #define PREFIX_IO16 0x01 // perform 16-bit wide I/O
+ #define PREFIX_FASTWR 0x04 // enable PPC mode fast-write
+ #define PREFIX_BLK 0x08 // enable block transfer mode
+
+// 60772 Registers
+
+#define REG_STATUS 0x00 // status register
+ #define STATUS_IRQA 0x01 // Peripheral IRQA line
+ #define STATUS_EEPROM_DO 0x40 // Serial EEPROM data bit
+#define REG_VERSION 0x01 // PPC version register (read)
+#define REG_HWCFG 0x02 // Hardware Config register
+#define REG_RAMSIZE 0x03 // Size of RAM Buffer
+ #define RAMSIZE_128K 0x02
+#define REG_EEPROM 0x06 // EEPROM control register
+ #define EEPROM_SK 0x01 // eeprom SK bit
+ #define EEPROM_DI 0x02 // eeprom DI bit
+ #define EEPROM_CS 0x04 // eeprom CS bit
+ #define EEPROM_EN 0x08 // eeprom output enable
+#define REG_BLKSIZE 0x08 // Block transfer len (24 bit)
+
+//***************************************************************************
+
+typedef struct ppc_storage {
+ u16 lpt_addr; // LPT base address
+ u8 ppc_id;
+ u8 mode; // operating mode
+ // 0 = PPC Uni SW
+ // 1 = PPC Uni FW
+ // 2 = PPC Bi SW
+ // 3 = PPC Bi FW
+ // 4 = EPP Byte
+ // 5 = EPP Word
+ // 6 = EPP Dword
+ u8 ppc_flags;
+ u8 org_data; // original LPT data port contents
+ u8 org_ctrl; // original LPT control port contents
+ u8 cur_ctrl; // current control port contents
+} Interface;
+
+//***************************************************************************
+
+// ppc_flags
+
+#define fifo_wait 0x10
+
+//***************************************************************************
+
+// DONT CHANGE THESE LEST YOU BREAK EVERYTHING - BIT FIELD DEPENDENCIES
+
+#define PPCMODE_UNI_SW 0
+#define PPCMODE_UNI_FW 1
+#define PPCMODE_BI_SW 2
+#define PPCMODE_BI_FW 3
+#define PPCMODE_EPP_BYTE 4
+#define PPCMODE_EPP_WORD 5
+#define PPCMODE_EPP_DWORD 6
+
+//***************************************************************************
+
+static int ppc6_select(Interface *ppc);
+static void ppc6_deselect(Interface *ppc);
+static void ppc6_send_cmd(Interface *ppc, u8 cmd);
+static void ppc6_wr_data_byte(Interface *ppc, u8 data);
+static u8 ppc6_rd_data_byte(Interface *ppc);
+static u8 ppc6_rd_port(Interface *ppc, u8 port);
+static void ppc6_wr_port(Interface *ppc, u8 port, u8 data);
+static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count);
+static void ppc6_wait_for_fifo(Interface *ppc);
+static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count);
+static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length);
+static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length);
+static void ppc6_wr_extout(Interface *ppc, u8 regdata);
+static int ppc6_open(Interface *ppc);
+static void ppc6_close(Interface *ppc);
+
+//***************************************************************************
+
+static int ppc6_select(Interface *ppc)
+{
+ u8 i, j, k;
+
+ i = inb(ppc->lpt_addr + 1);
+
+ if (i & 1)
+ outb(i, ppc->lpt_addr + 1);
+
+ ppc->org_data = inb(ppc->lpt_addr);
+
+ ppc->org_ctrl = inb(ppc->lpt_addr + 2) & 0x5F; // readback ctrl
+
+ ppc->cur_ctrl = ppc->org_ctrl;
+
+ ppc->cur_ctrl |= port_sel;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ if (ppc->org_data == 'b')
+ outb('x', ppc->lpt_addr);
+
+ outb('b', ppc->lpt_addr);
+ outb('p', ppc->lpt_addr);
+ outb(ppc->ppc_id, ppc->lpt_addr);
+ outb(~ppc->ppc_id,ppc->lpt_addr);
+
+ ppc->cur_ctrl &= ~port_sel;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ ppc->cur_ctrl = (ppc->cur_ctrl & port_int) | port_init;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ i = ppc->mode & 0x0C;
+
+ if (i == 0)
+ i = (ppc->mode & 2) | 1;
+
+ outb(i, ppc->lpt_addr);
+
+ ppc->cur_ctrl |= port_sel;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ // DELAY
+
+ ppc->cur_ctrl |= port_afd;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ j = ((i & 0x08) << 4) | ((i & 0x07) << 3);
+
+ k = inb(ppc->lpt_addr + 1) & 0xB8;
+
+ if (j == k)
+ {
+ ppc->cur_ctrl &= ~port_afd;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ k = (inb(ppc->lpt_addr + 1) & 0xB8) ^ 0xB8;
+
+ if (j == k)
+ {
+ if (i & 4) // EPP
+ ppc->cur_ctrl &= ~(port_sel | port_init);
+ else // PPC/ECP
+ ppc->cur_ctrl &= ~port_sel;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ return(1);
+ }
+ }
+
+ outb(ppc->org_ctrl, ppc->lpt_addr + 2);
+
+ outb(ppc->org_data, ppc->lpt_addr);
+
+ return(0); // FAIL
+}
+
+//***************************************************************************
+
+static void ppc6_deselect(Interface *ppc)
+{
+ if (ppc->mode & 4) // EPP
+ ppc->cur_ctrl |= port_init;
+ else // PPC/ECP
+ ppc->cur_ctrl |= port_sel;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ outb(ppc->org_data, ppc->lpt_addr);
+
+ outb((ppc->org_ctrl | port_sel), ppc->lpt_addr + 2);
+
+ outb(ppc->org_ctrl, ppc->lpt_addr + 2);
+}
+
+//***************************************************************************
+
+static void ppc6_send_cmd(Interface *ppc, u8 cmd)
+{
+ switch(ppc->mode)
+ {
+ case PPCMODE_UNI_SW :
+ case PPCMODE_UNI_FW :
+ case PPCMODE_BI_SW :
+ case PPCMODE_BI_FW :
+ {
+ outb(cmd, ppc->lpt_addr);
+
+ ppc->cur_ctrl ^= cmd_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ break;
+ }
+
+ case PPCMODE_EPP_BYTE :
+ case PPCMODE_EPP_WORD :
+ case PPCMODE_EPP_DWORD :
+ {
+ outb(cmd, ppc->lpt_addr + 3);
+
+ break;
+ }
+ }
+}
+
+//***************************************************************************
+
+static void ppc6_wr_data_byte(Interface *ppc, u8 data)
+{
+ switch(ppc->mode)
+ {
+ case PPCMODE_UNI_SW :
+ case PPCMODE_UNI_FW :
+ case PPCMODE_BI_SW :
+ case PPCMODE_BI_FW :
+ {
+ outb(data, ppc->lpt_addr);
+
+ ppc->cur_ctrl ^= data_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ break;
+ }
+
+ case PPCMODE_EPP_BYTE :
+ case PPCMODE_EPP_WORD :
+ case PPCMODE_EPP_DWORD :
+ {
+ outb(data, ppc->lpt_addr + 4);
+
+ break;
+ }
+ }
+}
+
+//***************************************************************************
+
+static u8 ppc6_rd_data_byte(Interface *ppc)
+{
+ u8 data = 0;
+
+ switch(ppc->mode)
+ {
+ case PPCMODE_UNI_SW :
+ case PPCMODE_UNI_FW :
+ {
+ ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ // DELAY
+
+ data = inb(ppc->lpt_addr + 1);
+
+ data = ((data & 0x80) >> 1) | ((data & 0x38) >> 3);
+
+ ppc->cur_ctrl |= port_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ // DELAY
+
+ data |= inb(ppc->lpt_addr + 1) & 0xB8;
+
+ break;
+ }
+
+ case PPCMODE_BI_SW :
+ case PPCMODE_BI_FW :
+ {
+ ppc->cur_ctrl |= port_dir;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ ppc->cur_ctrl = (ppc->cur_ctrl | port_stb) ^ data_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ data = inb(ppc->lpt_addr);
+
+ ppc->cur_ctrl &= ~port_stb;
+
+ outb(ppc->cur_ctrl,ppc->lpt_addr + 2);
+
+ ppc->cur_ctrl &= ~port_dir;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ break;
+ }
+
+ case PPCMODE_EPP_BYTE :
+ case PPCMODE_EPP_WORD :
+ case PPCMODE_EPP_DWORD :
+ {
+ outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2);
+
+ data = inb(ppc->lpt_addr + 4);
+
+ outb(ppc->cur_ctrl,ppc->lpt_addr + 2);
+
+ break;
+ }
+ }
+
+ return(data);
+}
+
+//***************************************************************************
+
+static u8 ppc6_rd_port(Interface *ppc, u8 port)
+{
+ ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_READ));
+
+ return(ppc6_rd_data_byte(ppc));
+}
+
+//***************************************************************************
+
+static void ppc6_wr_port(Interface *ppc, u8 port, u8 data)
+{
+ ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_WRITE));
+
+ ppc6_wr_data_byte(ppc, data);
+}
+
+//***************************************************************************
+
+static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count)
+{
+ switch(ppc->mode)
+ {
+ case PPCMODE_UNI_SW :
+ case PPCMODE_UNI_FW :
+ {
+ while(count)
+ {
+ u8 d;
+
+ ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ // DELAY
+
+ d = inb(ppc->lpt_addr + 1);
+
+ d = ((d & 0x80) >> 1) | ((d & 0x38) >> 3);
+
+ ppc->cur_ctrl |= port_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ // DELAY
+
+ d |= inb(ppc->lpt_addr + 1) & 0xB8;
+
+ *data++ = d;
+ count--;
+ }
+
+ break;
+ }
+
+ case PPCMODE_BI_SW :
+ case PPCMODE_BI_FW :
+ {
+ ppc->cur_ctrl |= port_dir;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ ppc->cur_ctrl |= port_stb;
+
+ while(count)
+ {
+ ppc->cur_ctrl ^= data_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ *data++ = inb(ppc->lpt_addr);
+ count--;
+ }
+
+ ppc->cur_ctrl &= ~port_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ ppc->cur_ctrl &= ~port_dir;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ break;
+ }
+
+ case PPCMODE_EPP_BYTE :
+ {
+ outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+
+ // DELAY
+
+ while(count)
+ {
+ *data++ = inb(ppc->lpt_addr + 4);
+ count--;
+ }
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ break;
+ }
+
+ case PPCMODE_EPP_WORD :
+ {
+ outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
+
+ // DELAY
+
+ while(count > 1)
+ {
+ *((u16 *)data) = inw(ppc->lpt_addr + 4);
+ data += 2;
+ count -= 2;
+ }
+
+ while(count)
+ {
+ *data++ = inb(ppc->lpt_addr + 4);
+ count--;
+ }
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ break;
+ }
+
+ case PPCMODE_EPP_DWORD :
+ {
+ outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2);
+
+ // DELAY
+
+ while(count > 3)
+ {
+ *((u32 *)data) = inl(ppc->lpt_addr + 4);
+ data += 4;
+ count -= 4;
+ }
+
+ while(count)
+ {
+ *data++ = inb(ppc->lpt_addr + 4);
+ count--;
+ }
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ break;
+ }
+ }
+
+}
+
+//***************************************************************************
+
+static void ppc6_wait_for_fifo(Interface *ppc)
+{
+ int i;
+
+ if (ppc->ppc_flags & fifo_wait)
+ {
+ for(i=0; i<20; i++)
+ inb(ppc->lpt_addr + 1);
+ }
+}
+
+//***************************************************************************
+
+static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count)
+{
+ switch(ppc->mode)
+ {
+ case PPCMODE_UNI_SW :
+ case PPCMODE_BI_SW :
+ {
+ while(count--)
+ {
+ outb(*data++, ppc->lpt_addr);
+
+ ppc->cur_ctrl ^= data_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ }
+
+ break;
+ }
+
+ case PPCMODE_UNI_FW :
+ case PPCMODE_BI_FW :
+ {
+ u8 this, last;
+
+ ppc6_send_cmd(ppc,(CMD_PREFIX_SET | PREFIX_FASTWR));
+
+ ppc->cur_ctrl |= port_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ last = *data;
+
+ outb(last, ppc->lpt_addr);
+
+ while(count)
+ {
+ this = *data++;
+ count--;
+
+ if (this == last)
+ {
+ ppc->cur_ctrl ^= data_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+ }
+ else
+ {
+ outb(this, ppc->lpt_addr);
+
+ last = this;
+ }
+ }
+
+ ppc->cur_ctrl &= ~port_stb;
+
+ outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
+
+ ppc6_send_cmd(ppc,(CMD_PREFIX_RESET | PREFIX_FASTWR));
+
+ break;
+ }
+
+ case PPCMODE_EPP_BYTE :
+ {
+ while(count)
+ {
+ outb(*data++,ppc->lpt_addr + 4);
+ count--;
+ }
+
+ ppc6_wait_for_fifo(ppc);
+
+ break;
+ }
+
+ case PPCMODE_EPP_WORD :
+ {
+ while(count > 1)
+ {
+ outw(*((u16 *)data),ppc->lpt_addr + 4);
+ data += 2;
+ count -= 2;
+ }
+
+ while(count)
+ {
+ outb(*data++,ppc->lpt_addr + 4);
+ count--;
+ }
+
+ ppc6_wait_for_fifo(ppc);
+
+ break;
+ }
+
+ case PPCMODE_EPP_DWORD :
+ {
+ while(count > 3)
+ {
+ outl(*((u32 *)data),ppc->lpt_addr + 4);
+ data += 4;
+ count -= 4;
+ }
+
+ while(count)
+ {
+ outb(*data++,ppc->lpt_addr + 4);
+ count--;
+ }
+
+ ppc6_wait_for_fifo(ppc);
+
+ break;
+ }
+ }
+}
+
+//***************************************************************************
+
+static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length)
+{
+ length = length << 1;
+
+ ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE));
+ ppc6_wr_data_byte(ppc,(u8)length);
+ ppc6_wr_data_byte(ppc,(u8)(length >> 8));
+ ppc6_wr_data_byte(ppc,0);
+
+ ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK));
+
+ ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_READ));
+
+ ppc6_rd_data_blk(ppc, data, length);
+
+ ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK));
+}
+
+//***************************************************************************
+
+static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length)
+{
+ length = length << 1;
+
+ ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE));
+ ppc6_wr_data_byte(ppc,(u8)length);
+ ppc6_wr_data_byte(ppc,(u8)(length >> 8));
+ ppc6_wr_data_byte(ppc,0);
+
+ ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK));
+
+ ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_WRITE));
+
+ ppc6_wr_data_blk(ppc, data, length);
+
+ ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK));
+}
+
+//***************************************************************************
+
+static void ppc6_wr_extout(Interface *ppc, u8 regdata)
+{
+ ppc6_send_cmd(ppc,(REG_VERSION | ACCESS_REG | ACCESS_WRITE));
+
+ ppc6_wr_data_byte(ppc, (u8)((regdata & 0x03) << 6));
+}
+
+//***************************************************************************
+
+static int ppc6_open(Interface *ppc)
+{
+ int ret;
+
+ ret = ppc6_select(ppc);
+
+ if (ret == 0)
+ return(ret);
+
+ ppc->ppc_flags &= ~fifo_wait;
+
+ ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_WRITE | REG_RAMSIZE));
+ ppc6_wr_data_byte(ppc, RAMSIZE_128K);
+
+ ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_READ | REG_VERSION));
+
+ if ((ppc6_rd_data_byte(ppc) & 0x3F) == 0x0C)
+ ppc->ppc_flags |= fifo_wait;
+
+ return(ret);
+}
+
+//***************************************************************************
+
+static void ppc6_close(Interface *ppc)
+{
+ ppc6_deselect(ppc);
+}
+
+//***************************************************************************
+
diff --git a/drivers/block/paride/pseudo.h b/drivers/block/paride/pseudo.h
new file mode 100644
index 000000000..bc3703294
--- /dev/null
+++ b/drivers/block/paride/pseudo.h
@@ -0,0 +1,102 @@
+/*
+ pseudo.h (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is the "pseudo-interrupt" logic for parallel port drivers.
+
+ This module is #included into each driver. It makes one
+ function available:
+
+ ps_set_intr( void (*continuation)(void),
+ int (*ready)(void),
+ int timeout,
+ int nice )
+
+ Which will arrange for ready() to be evaluated frequently and
+ when either it returns true, or timeout jiffies have passed,
+ continuation() will be invoked.
+
+ If nice is 1, the test will done approximately once a
+ jiffy. If nice is 0, the test will also be done whenever
+ the scheduler runs (by adding it to a task queue). If
+ nice is greater than 1, the test will be done once every
+ (nice-1) jiffies.
+
+*/
+
+/* Changes:
+
+ 1.01 1998.05.03 Switched from cli()/sti() to spinlocks
+ 1.02 1998.12.14 Added support for nice > 1
+*/
+
+#define PS_VERSION "1.02"
+
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+
+static void ps_tq_int(struct work_struct *work);
+
+static void (* ps_continuation)(void);
+static int (* ps_ready)(void);
+static unsigned long ps_timeout;
+static int ps_tq_active = 0;
+static int ps_nice = 0;
+
+static DEFINE_SPINLOCK(ps_spinlock __attribute__((unused)));
+
+static DECLARE_DELAYED_WORK(ps_tq, ps_tq_int);
+
+static void ps_set_intr(void (*continuation)(void),
+ int (*ready)(void),
+ int timeout, int nice)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ps_spinlock,flags);
+
+ ps_continuation = continuation;
+ ps_ready = ready;
+ ps_timeout = jiffies + timeout;
+ ps_nice = nice;
+
+ if (!ps_tq_active) {
+ ps_tq_active = 1;
+ if (!ps_nice)
+ schedule_delayed_work(&ps_tq, 0);
+ else
+ schedule_delayed_work(&ps_tq, ps_nice-1);
+ }
+ spin_unlock_irqrestore(&ps_spinlock,flags);
+}
+
+static void ps_tq_int(struct work_struct *work)
+{
+ void (*con)(void);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ps_spinlock,flags);
+
+ con = ps_continuation;
+ ps_tq_active = 0;
+
+ if (!con) {
+ spin_unlock_irqrestore(&ps_spinlock,flags);
+ return;
+ }
+ if (!ps_ready || ps_ready() || time_after_eq(jiffies, ps_timeout)) {
+ ps_continuation = NULL;
+ spin_unlock_irqrestore(&ps_spinlock,flags);
+ con();
+ return;
+ }
+ ps_tq_active = 1;
+ if (!ps_nice)
+ schedule_delayed_work(&ps_tq, 0);
+ else
+ schedule_delayed_work(&ps_tq, ps_nice-1);
+ spin_unlock_irqrestore(&ps_spinlock,flags);
+}
+
+/* end of pseudo.h */
+
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
new file mode 100644
index 000000000..e815312a0
--- /dev/null
+++ b/drivers/block/paride/pt.c
@@ -0,0 +1,1024 @@
+/*
+ pt.c (c) 1998 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is the high-level driver for parallel port ATAPI tape
+ drives based on chips supported by the paride module.
+
+ The driver implements both rewinding and non-rewinding
+ devices, filemarks, and the rewind ioctl. It allocates
+ a small internal "bounce buffer" for each open device, but
+ otherwise expects buffering and blocking to be done at the
+ user level. As with most block-structured tapes, short
+ writes are padded to full tape blocks, so reading back a file
+ may return more data than was actually written.
+
+ By default, the driver will autoprobe for a single parallel
+ port ATAPI tape drive, but if their individual parameters are
+ specified, the driver can handle up to 4 drives.
+
+ The rewinding devices are named /dev/pt0, /dev/pt1, ...
+ while the non-rewinding devices are /dev/npt0, /dev/npt1, etc.
+
+ The behaviour of the pt driver can be altered by setting
+ some parameters from the insmod command line. The following
+ parameters are adjustable:
+
+ drive0 These four arguments can be arrays of
+ drive1 1-6 integers as follows:
+ drive2
+ drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
+
+ Where,
+
+ <prt> is the base of the parallel port address for
+ the corresponding drive. (required)
+
+ <pro> is the protocol number for the adapter that
+ supports this drive. These numbers are
+ logged by 'paride' when the protocol modules
+ are initialised. (0 if not given)
+
+ <uni> for those adapters that support chained
+ devices, this is the unit selector for the
+ chain of devices on the given port. It should
+ be zero for devices that don't support chaining.
+ (0 if not given)
+
+ <mod> this can be -1 to choose the best mode, or one
+ of the mode numbers supported by the adapter.
+ (-1 if not given)
+
+ <slv> ATAPI devices can be jumpered to master or slave.
+ Set this to 0 to choose the master drive, 1 to
+ choose the slave, -1 (the default) to choose the
+ first drive found.
+
+ <dly> some parallel ports require the driver to
+ go more slowly. -1 sets a default value that
+ should work with the chosen protocol. Otherwise,
+ set this to a small integer, the larger it is
+ the slower the port i/o. In some cases, setting
+ this to zero will speed up the device. (default -1)
+
+ major You may use this parameter to override the
+ default major number (96) that this driver
+ will use. Be sure to change the device
+ name as well.
+
+ name This parameter is a character string that
+ contains the name the kernel will use for this
+ device (in /proc output, for instance).
+ (default "pt").
+
+ verbose This parameter controls the amount of logging
+ that the driver will do. Set it to 0 for
+ normal operation, 1 to see autoprobe progress
+ messages, or 2 to see additional debugging
+ output. (default 0)
+
+ If this driver is built into the kernel, you can use
+ the following command line parameters, with the same values
+ as the corresponding module parameters listed above:
+
+ pt.drive0
+ pt.drive1
+ pt.drive2
+ pt.drive3
+
+ In addition, you can use the parameter pt.disable to disable
+ the driver entirely.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 Round up transfer size, fix ready_wait,
+ loosed interpretation of ATAPI standard
+ for clearing error status.
+ Eliminate sti();
+ 1.02 GRG 1998.06.16 Eliminate an Ugh.
+ 1.03 GRG 1998.08.15 Adjusted PT_TMO, use HZ in loop timing,
+ extra debugging
+ 1.04 GRG 1998.09.24 Repair minor coding error, added jumbo support
+
+*/
+
+#define PT_VERSION "1.04"
+#define PT_MAJOR 96
+#define PT_NAME "pt"
+#define PT_UNITS 4
+
+#include <linux/types.h>
+
+/* Here are things one can override from the insmod command.
+ Most are autoprobed by paride unless set here. Verbose is on
+ by default.
+
+*/
+
+static int verbose = 0;
+static int major = PT_MAJOR;
+static char *name = PT_NAME;
+static int disable = 0;
+
+static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
+static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
+
+static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
+
+#define D_PRT 0
+#define D_PRO 1
+#define D_UNI 2
+#define D_MOD 3
+#define D_SLV 4
+#define D_DLY 5
+
+#define DU (*drives[unit])
+
+/* end of parameters */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mtio.h>
+#include <linux/device.h>
+#include <linux/sched.h> /* current, TASK_*, schedule_timeout() */
+#include <linux/mutex.h>
+
+#include <linux/uaccess.h>
+
+module_param(verbose, int, 0);
+module_param(major, int, 0);
+module_param(name, charp, 0);
+module_param_array(drive0, int, NULL, 0);
+module_param_array(drive1, int, NULL, 0);
+module_param_array(drive2, int, NULL, 0);
+module_param_array(drive3, int, NULL, 0);
+
+#include "paride.h"
+
+#define PT_MAX_RETRIES 5
+#define PT_TMO 3000 /* interrupt timeout in jiffies */
+#define PT_SPIN_DEL 50 /* spin delay in micro-seconds */
+#define PT_RESET_TMO 30 /* 30 seconds */
+#define PT_READY_TMO 60 /* 60 seconds */
+#define PT_REWIND_TMO 1200 /* 20 minutes */
+
+#define PT_SPIN ((1000000/(HZ*PT_SPIN_DEL))*PT_TMO)
+
+#define STAT_ERR 0x00001
+#define STAT_INDEX 0x00002
+#define STAT_ECC 0x00004
+#define STAT_DRQ 0x00008
+#define STAT_SEEK 0x00010
+#define STAT_WRERR 0x00020
+#define STAT_READY 0x00040
+#define STAT_BUSY 0x00080
+#define STAT_SENSE 0x1f000
+
+#define ATAPI_TEST_READY 0x00
+#define ATAPI_REWIND 0x01
+#define ATAPI_REQ_SENSE 0x03
+#define ATAPI_READ_6 0x08
+#define ATAPI_WRITE_6 0x0a
+#define ATAPI_WFM 0x10
+#define ATAPI_IDENTIFY 0x12
+#define ATAPI_MODE_SENSE 0x1a
+#define ATAPI_LOG_SENSE 0x4d
+
+static DEFINE_MUTEX(pt_mutex);
+static int pt_open(struct inode *inode, struct file *file);
+static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static int pt_release(struct inode *inode, struct file *file);
+static ssize_t pt_read(struct file *filp, char __user *buf,
+ size_t count, loff_t * ppos);
+static ssize_t pt_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t * ppos);
+static int pt_detect(void);
+
+/* bits in tape->flags */
+
+#define PT_MEDIA 1
+#define PT_WRITE_OK 2
+#define PT_REWIND 4
+#define PT_WRITING 8
+#define PT_READING 16
+#define PT_EOF 32
+
+#define PT_NAMELEN 8
+#define PT_BUFSIZE 16384
+
+struct pt_unit {
+ struct pi_adapter pia; /* interface to paride layer */
+ struct pi_adapter *pi;
+ int flags; /* various state flags */
+ int last_sense; /* result of last request sense */
+ int drive; /* drive */
+ atomic_t available; /* 1 if access is available 0 otherwise */
+ int bs; /* block size */
+ int capacity; /* Size of tape in KB */
+ int present; /* device present ? */
+ char *bufptr;
+ char name[PT_NAMELEN]; /* pf0, pf1, ... */
+};
+
+static int pt_identify(struct pt_unit *tape);
+
+static struct pt_unit pt[PT_UNITS];
+
+static char pt_scratch[512]; /* scratch block buffer */
+static void *par_drv; /* reference of parport driver */
+
+/* kernel glue structures */
+
+static const struct file_operations pt_fops = {
+ .owner = THIS_MODULE,
+ .read = pt_read,
+ .write = pt_write,
+ .unlocked_ioctl = pt_ioctl,
+ .open = pt_open,
+ .release = pt_release,
+ .llseek = noop_llseek,
+};
+
+/* sysfs class support */
+static struct class *pt_class;
+
+static inline int status_reg(struct pi_adapter *pi)
+{
+ return pi_read_regr(pi, 1, 6);
+}
+
+static inline int read_reg(struct pi_adapter *pi, int reg)
+{
+ return pi_read_regr(pi, 0, reg);
+}
+
+static inline void write_reg(struct pi_adapter *pi, int reg, int val)
+{
+ pi_write_regr(pi, 0, reg, val);
+}
+
+static inline u8 DRIVE(struct pt_unit *tape)
+{
+ return 0xa0+0x10*tape->drive;
+}
+
+static int pt_wait(struct pt_unit *tape, int go, int stop, char *fun, char *msg)
+{
+ int j, r, e, s, p;
+ struct pi_adapter *pi = tape->pi;
+
+ j = 0;
+ while ((((r = status_reg(pi)) & go) || (stop && (!(r & stop))))
+ && (j++ < PT_SPIN))
+ udelay(PT_SPIN_DEL);
+
+ if ((r & (STAT_ERR & stop)) || (j > PT_SPIN)) {
+ s = read_reg(pi, 7);
+ e = read_reg(pi, 1);
+ p = read_reg(pi, 2);
+ if (j > PT_SPIN)
+ e |= 0x100;
+ if (fun)
+ printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
+ " loop=%d phase=%d\n",
+ tape->name, fun, msg, r, s, e, j, p);
+ return (e << 8) + s;
+ }
+ return 0;
+}
+
+static int pt_command(struct pt_unit *tape, char *cmd, int dlen, char *fun)
+{
+ struct pi_adapter *pi = tape->pi;
+ pi_connect(pi);
+
+ write_reg(pi, 6, DRIVE(tape));
+
+ if (pt_wait(tape, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) {
+ pi_disconnect(pi);
+ return -1;
+ }
+
+ write_reg(pi, 4, dlen % 256);
+ write_reg(pi, 5, dlen / 256);
+ write_reg(pi, 7, 0xa0); /* ATAPI packet command */
+
+ if (pt_wait(tape, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) {
+ pi_disconnect(pi);
+ return -1;
+ }
+
+ if (read_reg(pi, 2) != 1) {
+ printk("%s: %s: command phase error\n", tape->name, fun);
+ pi_disconnect(pi);
+ return -1;
+ }
+
+ pi_write_block(pi, cmd, 12);
+
+ return 0;
+}
+
+static int pt_completion(struct pt_unit *tape, char *buf, char *fun)
+{
+ struct pi_adapter *pi = tape->pi;
+ int r, s, n, p;
+
+ r = pt_wait(tape, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
+ fun, "completion");
+
+ if (read_reg(pi, 7) & STAT_DRQ) {
+ n = (((read_reg(pi, 4) + 256 * read_reg(pi, 5)) +
+ 3) & 0xfffc);
+ p = read_reg(pi, 2) & 3;
+ if (p == 0)
+ pi_write_block(pi, buf, n);
+ if (p == 2)
+ pi_read_block(pi, buf, n);
+ }
+
+ s = pt_wait(tape, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done");
+
+ pi_disconnect(pi);
+
+ return (r ? r : s);
+}
+
+static void pt_req_sense(struct pt_unit *tape, int quiet)
+{
+ char rs_cmd[12] = { ATAPI_REQ_SENSE, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
+ char buf[16];
+ int r;
+
+ r = pt_command(tape, rs_cmd, 16, "Request sense");
+ mdelay(1);
+ if (!r)
+ pt_completion(tape, buf, "Request sense");
+
+ tape->last_sense = -1;
+ if (!r) {
+ if (!quiet)
+ printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
+ tape->name, buf[2] & 0xf, buf[12], buf[13]);
+ tape->last_sense = (buf[2] & 0xf) | ((buf[12] & 0xff) << 8)
+ | ((buf[13] & 0xff) << 16);
+ }
+}
+
+static int pt_atapi(struct pt_unit *tape, char *cmd, int dlen, char *buf, char *fun)
+{
+ int r;
+
+ r = pt_command(tape, cmd, dlen, fun);
+ mdelay(1);
+ if (!r)
+ r = pt_completion(tape, buf, fun);
+ if (r)
+ pt_req_sense(tape, !fun);
+
+ return r;
+}
+
+static void pt_sleep(int cs)
+{
+ schedule_timeout_interruptible(cs);
+}
+
+static int pt_poll_dsc(struct pt_unit *tape, int pause, int tmo, char *msg)
+{
+ struct pi_adapter *pi = tape->pi;
+ int k, e, s;
+
+ k = 0;
+ e = 0;
+ s = 0;
+ while (k < tmo) {
+ pt_sleep(pause);
+ k++;
+ pi_connect(pi);
+ write_reg(pi, 6, DRIVE(tape));
+ s = read_reg(pi, 7);
+ e = read_reg(pi, 1);
+ pi_disconnect(pi);
+ if (s & (STAT_ERR | STAT_SEEK))
+ break;
+ }
+ if ((k >= tmo) || (s & STAT_ERR)) {
+ if (k >= tmo)
+ printk("%s: %s DSC timeout\n", tape->name, msg);
+ else
+ printk("%s: %s stat=0x%x err=0x%x\n", tape->name, msg, s,
+ e);
+ pt_req_sense(tape, 0);
+ return 0;
+ }
+ return 1;
+}
+
+static void pt_media_access_cmd(struct pt_unit *tape, int tmo, char *cmd, char *fun)
+{
+ if (pt_command(tape, cmd, 0, fun)) {
+ pt_req_sense(tape, 0);
+ return;
+ }
+ pi_disconnect(tape->pi);
+ pt_poll_dsc(tape, HZ, tmo, fun);
+}
+
+static void pt_rewind(struct pt_unit *tape)
+{
+ char rw_cmd[12] = { ATAPI_REWIND, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+
+ pt_media_access_cmd(tape, PT_REWIND_TMO, rw_cmd, "rewind");
+}
+
+static void pt_write_fm(struct pt_unit *tape)
+{
+ char wm_cmd[12] = { ATAPI_WFM, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0 };
+
+ pt_media_access_cmd(tape, PT_TMO, wm_cmd, "write filemark");
+}
+
+#define DBMSG(msg) ((verbose>1)?(msg):NULL)
+
+static int pt_reset(struct pt_unit *tape)
+{
+ struct pi_adapter *pi = tape->pi;
+ int i, k, flg;
+ int expect[5] = { 1, 1, 1, 0x14, 0xeb };
+
+ pi_connect(pi);
+ write_reg(pi, 6, DRIVE(tape));
+ write_reg(pi, 7, 8);
+
+ pt_sleep(20 * HZ / 1000);
+
+ k = 0;
+ while ((k++ < PT_RESET_TMO) && (status_reg(pi) & STAT_BUSY))
+ pt_sleep(HZ / 10);
+
+ flg = 1;
+ for (i = 0; i < 5; i++)
+ flg &= (read_reg(pi, i + 1) == expect[i]);
+
+ if (verbose) {
+ printk("%s: Reset (%d) signature = ", tape->name, k);
+ for (i = 0; i < 5; i++)
+ printk("%3x", read_reg(pi, i + 1));
+ if (!flg)
+ printk(" (incorrect)");
+ printk("\n");
+ }
+
+ pi_disconnect(pi);
+ return flg - 1;
+}
+
+static int pt_ready_wait(struct pt_unit *tape, int tmo)
+{
+ char tr_cmd[12] = { ATAPI_TEST_READY, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ int k, p;
+
+ k = 0;
+ while (k < tmo) {
+ tape->last_sense = 0;
+ pt_atapi(tape, tr_cmd, 0, NULL, DBMSG("test unit ready"));
+ p = tape->last_sense;
+ if (!p)
+ return 0;
+ if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6)))
+ return p;
+ k++;
+ pt_sleep(HZ);
+ }
+ return 0x000020; /* timeout */
+}
+
+static void xs(char *buf, char *targ, int offs, int len)
+{
+ int j, k, l;
+
+ j = 0;
+ l = 0;
+ for (k = 0; k < len; k++)
+ if ((buf[k + offs] != 0x20) || (buf[k + offs] != l))
+ l = targ[j++] = buf[k + offs];
+ if (l == 0x20)
+ j--;
+ targ[j] = 0;
+}
+
+static int xn(char *buf, int offs, int size)
+{
+ int v, k;
+
+ v = 0;
+ for (k = 0; k < size; k++)
+ v = v * 256 + (buf[k + offs] & 0xff);
+ return v;
+}
+
+static int pt_identify(struct pt_unit *tape)
+{
+ int dt, s;
+ char *ms[2] = { "master", "slave" };
+ char mf[10], id[18];
+ char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+ char ms_cmd[12] =
+ { ATAPI_MODE_SENSE, 0, 0x2a, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
+ char ls_cmd[12] =
+ { ATAPI_LOG_SENSE, 0, 0x71, 0, 0, 0, 0, 0, 36, 0, 0, 0 };
+ char buf[36];
+
+ s = pt_atapi(tape, id_cmd, 36, buf, "identify");
+ if (s)
+ return -1;
+
+ dt = buf[0] & 0x1f;
+ if (dt != 1) {
+ if (verbose)
+ printk("%s: Drive %d, unsupported type %d\n",
+ tape->name, tape->drive, dt);
+ return -1;
+ }
+
+ xs(buf, mf, 8, 8);
+ xs(buf, id, 16, 16);
+
+ tape->flags = 0;
+ tape->capacity = 0;
+ tape->bs = 0;
+
+ if (!pt_ready_wait(tape, PT_READY_TMO))
+ tape->flags |= PT_MEDIA;
+
+ if (!pt_atapi(tape, ms_cmd, 36, buf, "mode sense")) {
+ if (!(buf[2] & 0x80))
+ tape->flags |= PT_WRITE_OK;
+ tape->bs = xn(buf, 10, 2);
+ }
+
+ if (!pt_atapi(tape, ls_cmd, 36, buf, "log sense"))
+ tape->capacity = xn(buf, 24, 4);
+
+ printk("%s: %s %s, %s", tape->name, mf, id, ms[tape->drive]);
+ if (!(tape->flags & PT_MEDIA))
+ printk(", no media\n");
+ else {
+ if (!(tape->flags & PT_WRITE_OK))
+ printk(", RO");
+ printk(", blocksize %d, %d MB\n", tape->bs, tape->capacity / 1024);
+ }
+
+ return 0;
+}
+
+
+/*
+ * returns 0, with id set if drive is detected
+ * -1, if drive detection failed
+ */
+static int pt_probe(struct pt_unit *tape)
+{
+ if (tape->drive == -1) {
+ for (tape->drive = 0; tape->drive <= 1; tape->drive++)
+ if (!pt_reset(tape))
+ return pt_identify(tape);
+ } else {
+ if (!pt_reset(tape))
+ return pt_identify(tape);
+ }
+ return -1;
+}
+
+static int pt_detect(void)
+{
+ struct pt_unit *tape;
+ int specified = 0, found = 0;
+ int unit;
+
+ printk("%s: %s version %s, major %d\n", name, name, PT_VERSION, major);
+
+ par_drv = pi_register_driver(name);
+ if (!par_drv) {
+ pr_err("failed to register %s driver\n", name);
+ return -1;
+ }
+
+ specified = 0;
+ for (unit = 0; unit < PT_UNITS; unit++) {
+ struct pt_unit *tape = &pt[unit];
+ tape->pi = &tape->pia;
+ atomic_set(&tape->available, 1);
+ tape->flags = 0;
+ tape->last_sense = 0;
+ tape->present = 0;
+ tape->bufptr = NULL;
+ tape->drive = DU[D_SLV];
+ snprintf(tape->name, PT_NAMELEN, "%s%d", name, unit);
+ if (!DU[D_PRT])
+ continue;
+ specified++;
+ if (pi_init(tape->pi, 0, DU[D_PRT], DU[D_MOD], DU[D_UNI],
+ DU[D_PRO], DU[D_DLY], pt_scratch, PI_PT,
+ verbose, tape->name)) {
+ if (!pt_probe(tape)) {
+ tape->present = 1;
+ found++;
+ } else
+ pi_release(tape->pi);
+ }
+ }
+ if (specified == 0) {
+ tape = pt;
+ if (pi_init(tape->pi, 1, -1, -1, -1, -1, -1, pt_scratch,
+ PI_PT, verbose, tape->name)) {
+ if (!pt_probe(tape)) {
+ tape->present = 1;
+ found++;
+ } else
+ pi_release(tape->pi);
+ }
+
+ }
+ if (found)
+ return 0;
+
+ pi_unregister_driver(par_drv);
+ printk("%s: No ATAPI tape drive detected\n", name);
+ return -1;
+}
+
+static int pt_open(struct inode *inode, struct file *file)
+{
+ int unit = iminor(inode) & 0x7F;
+ struct pt_unit *tape = pt + unit;
+ int err;
+
+ mutex_lock(&pt_mutex);
+ if (unit >= PT_UNITS || (!tape->present)) {
+ mutex_unlock(&pt_mutex);
+ return -ENODEV;
+ }
+
+ err = -EBUSY;
+ if (!atomic_dec_and_test(&tape->available))
+ goto out;
+
+ pt_identify(tape);
+
+ err = -ENODEV;
+ if (!(tape->flags & PT_MEDIA))
+ goto out;
+
+ err = -EROFS;
+ if ((!(tape->flags & PT_WRITE_OK)) && (file->f_mode & FMODE_WRITE))
+ goto out;
+
+ if (!(iminor(inode) & 128))
+ tape->flags |= PT_REWIND;
+
+ err = -ENOMEM;
+ tape->bufptr = kmalloc(PT_BUFSIZE, GFP_KERNEL);
+ if (tape->bufptr == NULL) {
+ printk("%s: buffer allocation failed\n", tape->name);
+ goto out;
+ }
+
+ file->private_data = tape;
+ mutex_unlock(&pt_mutex);
+ return 0;
+
+out:
+ atomic_inc(&tape->available);
+ mutex_unlock(&pt_mutex);
+ return err;
+}
+
+static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct pt_unit *tape = file->private_data;
+ struct mtop __user *p = (void __user *)arg;
+ struct mtop mtop;
+
+ switch (cmd) {
+ case MTIOCTOP:
+ if (copy_from_user(&mtop, p, sizeof(struct mtop)))
+ return -EFAULT;
+
+ switch (mtop.mt_op) {
+
+ case MTREW:
+ mutex_lock(&pt_mutex);
+ pt_rewind(tape);
+ mutex_unlock(&pt_mutex);
+ return 0;
+
+ case MTWEOF:
+ mutex_lock(&pt_mutex);
+ pt_write_fm(tape);
+ mutex_unlock(&pt_mutex);
+ return 0;
+
+ default:
+ /* FIXME: rate limit ?? */
+ printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name,
+ mtop.mt_op);
+ return -EINVAL;
+ }
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static int
+pt_release(struct inode *inode, struct file *file)
+{
+ struct pt_unit *tape = file->private_data;
+
+ if (atomic_read(&tape->available) > 1)
+ return -EINVAL;
+
+ if (tape->flags & PT_WRITING)
+ pt_write_fm(tape);
+
+ if (tape->flags & PT_REWIND)
+ pt_rewind(tape);
+
+ kfree(tape->bufptr);
+ tape->bufptr = NULL;
+
+ atomic_inc(&tape->available);
+
+ return 0;
+
+}
+
+static ssize_t pt_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
+{
+ struct pt_unit *tape = filp->private_data;
+ struct pi_adapter *pi = tape->pi;
+ char rd_cmd[12] = { ATAPI_READ_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ int k, n, r, p, s, t, b;
+
+ if (!(tape->flags & (PT_READING | PT_WRITING))) {
+ tape->flags |= PT_READING;
+ if (pt_atapi(tape, rd_cmd, 0, NULL, "start read-ahead"))
+ return -EIO;
+ } else if (tape->flags & PT_WRITING)
+ return -EIO;
+
+ if (tape->flags & PT_EOF)
+ return 0;
+
+ t = 0;
+
+ while (count > 0) {
+
+ if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "read"))
+ return -EIO;
+
+ n = count;
+ if (n > 32768)
+ n = 32768; /* max per command */
+ b = (n - 1 + tape->bs) / tape->bs;
+ n = b * tape->bs; /* rounded up to even block */
+
+ rd_cmd[4] = b;
+
+ r = pt_command(tape, rd_cmd, n, "read");
+
+ mdelay(1);
+
+ if (r) {
+ pt_req_sense(tape, 0);
+ return -EIO;
+ }
+
+ while (1) {
+
+ r = pt_wait(tape, STAT_BUSY,
+ STAT_DRQ | STAT_ERR | STAT_READY,
+ DBMSG("read DRQ"), "");
+
+ if (r & STAT_SENSE) {
+ pi_disconnect(pi);
+ pt_req_sense(tape, 0);
+ return -EIO;
+ }
+
+ if (r)
+ tape->flags |= PT_EOF;
+
+ s = read_reg(pi, 7);
+
+ if (!(s & STAT_DRQ))
+ break;
+
+ n = (read_reg(pi, 4) + 256 * read_reg(pi, 5));
+ p = (read_reg(pi, 2) & 3);
+ if (p != 2) {
+ pi_disconnect(pi);
+ printk("%s: Phase error on read: %d\n", tape->name,
+ p);
+ return -EIO;
+ }
+
+ while (n > 0) {
+ k = n;
+ if (k > PT_BUFSIZE)
+ k = PT_BUFSIZE;
+ pi_read_block(pi, tape->bufptr, k);
+ n -= k;
+ b = k;
+ if (b > count)
+ b = count;
+ if (copy_to_user(buf + t, tape->bufptr, b)) {
+ pi_disconnect(pi);
+ return -EFAULT;
+ }
+ t += b;
+ count -= b;
+ }
+
+ }
+ pi_disconnect(pi);
+ if (tape->flags & PT_EOF)
+ break;
+ }
+
+ return t;
+
+}
+
+static ssize_t pt_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
+{
+ struct pt_unit *tape = filp->private_data;
+ struct pi_adapter *pi = tape->pi;
+ char wr_cmd[12] = { ATAPI_WRITE_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ int k, n, r, p, s, t, b;
+
+ if (!(tape->flags & PT_WRITE_OK))
+ return -EROFS;
+
+ if (!(tape->flags & (PT_READING | PT_WRITING))) {
+ tape->flags |= PT_WRITING;
+ if (pt_atapi
+ (tape, wr_cmd, 0, NULL, "start buffer-available mode"))
+ return -EIO;
+ } else if (tape->flags & PT_READING)
+ return -EIO;
+
+ if (tape->flags & PT_EOF)
+ return -ENOSPC;
+
+ t = 0;
+
+ while (count > 0) {
+
+ if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "write"))
+ return -EIO;
+
+ n = count;
+ if (n > 32768)
+ n = 32768; /* max per command */
+ b = (n - 1 + tape->bs) / tape->bs;
+ n = b * tape->bs; /* rounded up to even block */
+
+ wr_cmd[4] = b;
+
+ r = pt_command(tape, wr_cmd, n, "write");
+
+ mdelay(1);
+
+ if (r) { /* error delivering command only */
+ pt_req_sense(tape, 0);
+ return -EIO;
+ }
+
+ while (1) {
+
+ r = pt_wait(tape, STAT_BUSY,
+ STAT_DRQ | STAT_ERR | STAT_READY,
+ DBMSG("write DRQ"), NULL);
+
+ if (r & STAT_SENSE) {
+ pi_disconnect(pi);
+ pt_req_sense(tape, 0);
+ return -EIO;
+ }
+
+ if (r)
+ tape->flags |= PT_EOF;
+
+ s = read_reg(pi, 7);
+
+ if (!(s & STAT_DRQ))
+ break;
+
+ n = (read_reg(pi, 4) + 256 * read_reg(pi, 5));
+ p = (read_reg(pi, 2) & 3);
+ if (p != 0) {
+ pi_disconnect(pi);
+ printk("%s: Phase error on write: %d \n",
+ tape->name, p);
+ return -EIO;
+ }
+
+ while (n > 0) {
+ k = n;
+ if (k > PT_BUFSIZE)
+ k = PT_BUFSIZE;
+ b = k;
+ if (b > count)
+ b = count;
+ if (copy_from_user(tape->bufptr, buf + t, b)) {
+ pi_disconnect(pi);
+ return -EFAULT;
+ }
+ pi_write_block(pi, tape->bufptr, k);
+ t += b;
+ count -= b;
+ n -= k;
+ }
+
+ }
+ pi_disconnect(pi);
+ if (tape->flags & PT_EOF)
+ break;
+ }
+
+ return t;
+}
+
+static int __init pt_init(void)
+{
+ int unit;
+ int err;
+
+ if (disable) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (pt_detect()) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ err = register_chrdev(major, name, &pt_fops);
+ if (err < 0) {
+ printk("pt_init: unable to get major number %d\n", major);
+ for (unit = 0; unit < PT_UNITS; unit++)
+ if (pt[unit].present)
+ pi_release(pt[unit].pi);
+ goto out;
+ }
+ major = err;
+ pt_class = class_create(THIS_MODULE, "pt");
+ if (IS_ERR(pt_class)) {
+ err = PTR_ERR(pt_class);
+ goto out_chrdev;
+ }
+
+ for (unit = 0; unit < PT_UNITS; unit++)
+ if (pt[unit].present) {
+ device_create(pt_class, NULL, MKDEV(major, unit), NULL,
+ "pt%d", unit);
+ device_create(pt_class, NULL, MKDEV(major, unit + 128),
+ NULL, "pt%dn", unit);
+ }
+ goto out;
+
+out_chrdev:
+ unregister_chrdev(major, "pt");
+out:
+ return err;
+}
+
+static void __exit pt_exit(void)
+{
+ int unit;
+ for (unit = 0; unit < PT_UNITS; unit++)
+ if (pt[unit].present) {
+ device_destroy(pt_class, MKDEV(major, unit));
+ device_destroy(pt_class, MKDEV(major, unit + 128));
+ }
+ class_destroy(pt_class);
+ unregister_chrdev(major, name);
+ for (unit = 0; unit < PT_UNITS; unit++)
+ if (pt[unit].present)
+ pi_release(pt[unit].pi);
+}
+
+MODULE_LICENSE("GPL");
+module_init(pt_init)
+module_exit(pt_exit)