diff options
Diffstat (limited to 'drivers/clk/bcm/clk-bcm2835.c')
| -rw-r--r-- | drivers/clk/bcm/clk-bcm2835.c | 2353 |
1 files changed, 2353 insertions, 0 deletions
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c new file mode 100644 index 000000000..e74fe6219 --- /dev/null +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -0,0 +1,2353 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2010,2015 Broadcom + * Copyright (C) 2012 Stephen Warren + */ + +/** + * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain) + * + * The clock tree on the 2835 has several levels. There's a root + * oscillator running at 19.2Mhz. After the oscillator there are 5 + * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays", + * and "HDMI displays". Those 5 PLLs each can divide their output to + * produce up to 4 channels. Finally, there is the level of clocks to + * be consumed by other hardware components (like "H264" or "HDMI + * state machine"), which divide off of some subset of the PLL + * channels. + * + * All of the clocks in the tree are exposed in the DT, because the DT + * may want to make assignments of the final layer of clocks to the + * PLL channels, and some components of the hardware will actually + * skip layers of the tree (for example, the pixel clock comes + * directly from the PLLH PIX channel without using a CM_*CTL clock + * generator). + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/math.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <dt-bindings/clock/bcm2835.h> + +#define CM_PASSWORD 0x5a000000 + +#define CM_GNRICCTL 0x000 +#define CM_GNRICDIV 0x004 +# define CM_DIV_FRAC_BITS 12 +# define CM_DIV_FRAC_MASK GENMASK(CM_DIV_FRAC_BITS - 1, 0) + +#define CM_VPUCTL 0x008 +#define CM_VPUDIV 0x00c +#define CM_SYSCTL 0x010 +#define CM_SYSDIV 0x014 +#define CM_PERIACTL 0x018 +#define CM_PERIADIV 0x01c +#define CM_PERIICTL 0x020 +#define CM_PERIIDIV 0x024 +#define CM_H264CTL 0x028 +#define CM_H264DIV 0x02c +#define CM_ISPCTL 0x030 +#define CM_ISPDIV 0x034 +#define CM_V3DCTL 0x038 +#define CM_V3DDIV 0x03c +#define CM_CAM0CTL 0x040 +#define CM_CAM0DIV 0x044 +#define CM_CAM1CTL 0x048 +#define CM_CAM1DIV 0x04c +#define CM_CCP2CTL 0x050 +#define CM_CCP2DIV 0x054 +#define CM_DSI0ECTL 0x058 +#define CM_DSI0EDIV 0x05c +#define CM_DSI0PCTL 0x060 +#define CM_DSI0PDIV 0x064 +#define CM_DPICTL 0x068 +#define CM_DPIDIV 0x06c +#define CM_GP0CTL 0x070 +#define CM_GP0DIV 0x074 +#define CM_GP1CTL 0x078 +#define CM_GP1DIV 0x07c +#define CM_GP2CTL 0x080 +#define CM_GP2DIV 0x084 +#define CM_HSMCTL 0x088 +#define CM_HSMDIV 0x08c +#define CM_OTPCTL 0x090 +#define CM_OTPDIV 0x094 +#define CM_PCMCTL 0x098 +#define CM_PCMDIV 0x09c +#define CM_PWMCTL 0x0a0 +#define CM_PWMDIV 0x0a4 +#define CM_SLIMCTL 0x0a8 +#define CM_SLIMDIV 0x0ac +#define CM_SMICTL 0x0b0 +#define CM_SMIDIV 0x0b4 +/* no definition for 0x0b8 and 0x0bc */ +#define CM_TCNTCTL 0x0c0 +# define CM_TCNT_SRC1_SHIFT 12 +#define CM_TCNTCNT 0x0c4 +#define CM_TECCTL 0x0c8 +#define CM_TECDIV 0x0cc +#define CM_TD0CTL 0x0d0 +#define CM_TD0DIV 0x0d4 +#define CM_TD1CTL 0x0d8 +#define CM_TD1DIV 0x0dc +#define CM_TSENSCTL 0x0e0 +#define CM_TSENSDIV 0x0e4 +#define CM_TIMERCTL 0x0e8 +#define CM_TIMERDIV 0x0ec +#define CM_UARTCTL 0x0f0 +#define CM_UARTDIV 0x0f4 +#define CM_VECCTL 0x0f8 +#define CM_VECDIV 0x0fc +#define CM_PULSECTL 0x190 +#define CM_PULSEDIV 0x194 +#define CM_SDCCTL 0x1a8 +#define CM_SDCDIV 0x1ac +#define CM_ARMCTL 0x1b0 +#define CM_AVEOCTL 0x1b8 +#define CM_AVEODIV 0x1bc +#define CM_EMMCCTL 0x1c0 +#define CM_EMMCDIV 0x1c4 +#define CM_EMMC2CTL 0x1d0 +#define CM_EMMC2DIV 0x1d4 + +/* General bits for the CM_*CTL regs */ +# define CM_ENABLE BIT(4) +# define CM_KILL BIT(5) +# define CM_GATE_BIT 6 +# define CM_GATE BIT(CM_GATE_BIT) +# define CM_BUSY BIT(7) +# define CM_BUSYD BIT(8) +# define CM_FRAC BIT(9) +# define CM_SRC_SHIFT 0 +# define CM_SRC_BITS 4 +# define CM_SRC_MASK 0xf +# define CM_SRC_GND 0 +# define CM_SRC_OSC 1 +# define CM_SRC_TESTDEBUG0 2 +# define CM_SRC_TESTDEBUG1 3 +# define CM_SRC_PLLA_CORE 4 +# define CM_SRC_PLLA_PER 4 +# define CM_SRC_PLLC_CORE0 5 +# define CM_SRC_PLLC_PER 5 +# define CM_SRC_PLLC_CORE1 8 +# define CM_SRC_PLLD_CORE 6 +# define CM_SRC_PLLD_PER 6 +# define CM_SRC_PLLH_AUX 7 +# define CM_SRC_PLLC_CORE1 8 +# define CM_SRC_PLLC_CORE2 9 + +#define CM_OSCCOUNT 0x100 + +#define CM_PLLA 0x104 +# define CM_PLL_ANARST BIT(8) +# define CM_PLLA_HOLDPER BIT(7) +# define CM_PLLA_LOADPER BIT(6) +# define CM_PLLA_HOLDCORE BIT(5) +# define CM_PLLA_LOADCORE BIT(4) +# define CM_PLLA_HOLDCCP2 BIT(3) +# define CM_PLLA_LOADCCP2 BIT(2) +# define CM_PLLA_HOLDDSI0 BIT(1) +# define CM_PLLA_LOADDSI0 BIT(0) + +#define CM_PLLC 0x108 +# define CM_PLLC_HOLDPER BIT(7) +# define CM_PLLC_LOADPER BIT(6) +# define CM_PLLC_HOLDCORE2 BIT(5) +# define CM_PLLC_LOADCORE2 BIT(4) +# define CM_PLLC_HOLDCORE1 BIT(3) +# define CM_PLLC_LOADCORE1 BIT(2) +# define CM_PLLC_HOLDCORE0 BIT(1) +# define CM_PLLC_LOADCORE0 BIT(0) + +#define CM_PLLD 0x10c +# define CM_PLLD_HOLDPER BIT(7) +# define CM_PLLD_LOADPER BIT(6) +# define CM_PLLD_HOLDCORE BIT(5) +# define CM_PLLD_LOADCORE BIT(4) +# define CM_PLLD_HOLDDSI1 BIT(3) +# define CM_PLLD_LOADDSI1 BIT(2) +# define CM_PLLD_HOLDDSI0 BIT(1) +# define CM_PLLD_LOADDSI0 BIT(0) + +#define CM_PLLH 0x110 +# define CM_PLLH_LOADRCAL BIT(2) +# define CM_PLLH_LOADAUX BIT(1) +# define CM_PLLH_LOADPIX BIT(0) + +#define CM_LOCK 0x114 +# define CM_LOCK_FLOCKH BIT(12) +# define CM_LOCK_FLOCKD BIT(11) +# define CM_LOCK_FLOCKC BIT(10) +# define CM_LOCK_FLOCKB BIT(9) +# define CM_LOCK_FLOCKA BIT(8) + +#define CM_EVENT 0x118 +#define CM_DSI1ECTL 0x158 +#define CM_DSI1EDIV 0x15c +#define CM_DSI1PCTL 0x160 +#define CM_DSI1PDIV 0x164 +#define CM_DFTCTL 0x168 +#define CM_DFTDIV 0x16c + +#define CM_PLLB 0x170 +# define CM_PLLB_HOLDARM BIT(1) +# define CM_PLLB_LOADARM BIT(0) + +#define A2W_PLLA_CTRL 0x1100 +#define A2W_PLLC_CTRL 0x1120 +#define A2W_PLLD_CTRL 0x1140 +#define A2W_PLLH_CTRL 0x1160 +#define A2W_PLLB_CTRL 0x11e0 +# define A2W_PLL_CTRL_PRST_DISABLE BIT(17) +# define A2W_PLL_CTRL_PWRDN BIT(16) +# define A2W_PLL_CTRL_PDIV_MASK 0x000007000 +# define A2W_PLL_CTRL_PDIV_SHIFT 12 +# define A2W_PLL_CTRL_NDIV_MASK 0x0000003ff +# define A2W_PLL_CTRL_NDIV_SHIFT 0 + +#define A2W_PLLA_ANA0 0x1010 +#define A2W_PLLC_ANA0 0x1030 +#define A2W_PLLD_ANA0 0x1050 +#define A2W_PLLH_ANA0 0x1070 +#define A2W_PLLB_ANA0 0x10f0 + +#define A2W_PLL_KA_SHIFT 7 +#define A2W_PLL_KA_MASK GENMASK(9, 7) +#define A2W_PLL_KI_SHIFT 19 +#define A2W_PLL_KI_MASK GENMASK(21, 19) +#define A2W_PLL_KP_SHIFT 15 +#define A2W_PLL_KP_MASK GENMASK(18, 15) + +#define A2W_PLLH_KA_SHIFT 19 +#define A2W_PLLH_KA_MASK GENMASK(21, 19) +#define A2W_PLLH_KI_LOW_SHIFT 22 +#define A2W_PLLH_KI_LOW_MASK GENMASK(23, 22) +#define A2W_PLLH_KI_HIGH_SHIFT 0 +#define A2W_PLLH_KI_HIGH_MASK GENMASK(0, 0) +#define A2W_PLLH_KP_SHIFT 1 +#define A2W_PLLH_KP_MASK GENMASK(4, 1) + +#define A2W_XOSC_CTRL 0x1190 +# define A2W_XOSC_CTRL_PLLB_ENABLE BIT(7) +# define A2W_XOSC_CTRL_PLLA_ENABLE BIT(6) +# define A2W_XOSC_CTRL_PLLD_ENABLE BIT(5) +# define A2W_XOSC_CTRL_DDR_ENABLE BIT(4) +# define A2W_XOSC_CTRL_CPR1_ENABLE BIT(3) +# define A2W_XOSC_CTRL_USB_ENABLE BIT(2) +# define A2W_XOSC_CTRL_HDMI_ENABLE BIT(1) +# define A2W_XOSC_CTRL_PLLC_ENABLE BIT(0) + +#define A2W_PLLA_FRAC 0x1200 +#define A2W_PLLC_FRAC 0x1220 +#define A2W_PLLD_FRAC 0x1240 +#define A2W_PLLH_FRAC 0x1260 +#define A2W_PLLB_FRAC 0x12e0 +# define A2W_PLL_FRAC_MASK ((1 << A2W_PLL_FRAC_BITS) - 1) +# define A2W_PLL_FRAC_BITS 20 + +#define A2W_PLL_CHANNEL_DISABLE BIT(8) +#define A2W_PLL_DIV_BITS 8 +#define A2W_PLL_DIV_SHIFT 0 + +#define A2W_PLLA_DSI0 0x1300 +#define A2W_PLLA_CORE 0x1400 +#define A2W_PLLA_PER 0x1500 +#define A2W_PLLA_CCP2 0x1600 + +#define A2W_PLLC_CORE2 0x1320 +#define A2W_PLLC_CORE1 0x1420 +#define A2W_PLLC_PER 0x1520 +#define A2W_PLLC_CORE0 0x1620 + +#define A2W_PLLD_DSI0 0x1340 +#define A2W_PLLD_CORE 0x1440 +#define A2W_PLLD_PER 0x1540 +#define A2W_PLLD_DSI1 0x1640 + +#define A2W_PLLH_AUX 0x1360 +#define A2W_PLLH_RCAL 0x1460 +#define A2W_PLLH_PIX 0x1560 +#define A2W_PLLH_STS 0x1660 + +#define A2W_PLLH_CTRLR 0x1960 +#define A2W_PLLH_FRACR 0x1a60 +#define A2W_PLLH_AUXR 0x1b60 +#define A2W_PLLH_RCALR 0x1c60 +#define A2W_PLLH_PIXR 0x1d60 +#define A2W_PLLH_STSR 0x1e60 + +#define A2W_PLLB_ARM 0x13e0 +#define A2W_PLLB_SP0 0x14e0 +#define A2W_PLLB_SP1 0x15e0 +#define A2W_PLLB_SP2 0x16e0 + +#define LOCK_TIMEOUT_NS 100000000 +#define BCM2835_MAX_FB_RATE 1750000000u + +#define SOC_BCM2835 BIT(0) +#define SOC_BCM2711 BIT(1) +#define SOC_ALL (SOC_BCM2835 | SOC_BCM2711) + +/* + * Names of clocks used within the driver that need to be replaced + * with an external parent's name. This array is in the order that + * the clocks node in the DT references external clocks. + */ +static const char *const cprman_parent_names[] = { + "xosc", + "dsi0_byte", + "dsi0_ddr2", + "dsi0_ddr", + "dsi1_byte", + "dsi1_ddr2", + "dsi1_ddr", +}; + +struct bcm2835_cprman { + struct device *dev; + void __iomem *regs; + spinlock_t regs_lock; /* spinlock for all clocks */ + unsigned int soc; + + /* + * Real names of cprman clock parents looked up through + * of_clk_get_parent_name(), which will be used in the + * parent_names[] arrays for clock registration. + */ + const char *real_parent_names[ARRAY_SIZE(cprman_parent_names)]; + + /* Must be last */ + struct clk_hw_onecell_data onecell; +}; + +struct cprman_plat_data { + unsigned int soc; +}; + +static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val) +{ + writel(CM_PASSWORD | val, cprman->regs + reg); +} + +static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg) +{ + return readl(cprman->regs + reg); +} + +/* Does a cycle of measuring a clock through the TCNT clock, which may + * source from many other clocks in the system. + */ +static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman, + u32 tcnt_mux) +{ + u32 osccount = 19200; /* 1ms */ + u32 count; + ktime_t timeout; + + spin_lock(&cprman->regs_lock); + + cprman_write(cprman, CM_TCNTCTL, CM_KILL); + + cprman_write(cprman, CM_TCNTCTL, + (tcnt_mux & CM_SRC_MASK) | + (tcnt_mux >> CM_SRC_BITS) << CM_TCNT_SRC1_SHIFT); + + cprman_write(cprman, CM_OSCCOUNT, osccount); + + /* do a kind delay at the start */ + mdelay(1); + + /* Finish off whatever is left of OSCCOUNT */ + timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); + while (cprman_read(cprman, CM_OSCCOUNT)) { + if (ktime_after(ktime_get(), timeout)) { + dev_err(cprman->dev, "timeout waiting for OSCCOUNT\n"); + count = 0; + goto out; + } + cpu_relax(); + } + + /* Wait for BUSY to clear. */ + timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); + while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) { + if (ktime_after(ktime_get(), timeout)) { + dev_err(cprman->dev, "timeout waiting for !BUSY\n"); + count = 0; + goto out; + } + cpu_relax(); + } + + count = cprman_read(cprman, CM_TCNTCNT); + + cprman_write(cprman, CM_TCNTCTL, 0); + +out: + spin_unlock(&cprman->regs_lock); + + return count * 1000; +} + +static void bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base, + const struct debugfs_reg32 *regs, + size_t nregs, struct dentry *dentry) +{ + struct debugfs_regset32 *regset; + + regset = devm_kzalloc(cprman->dev, sizeof(*regset), GFP_KERNEL); + if (!regset) + return; + + regset->regs = regs; + regset->nregs = nregs; + regset->base = cprman->regs + base; + + debugfs_create_regset32("regdump", S_IRUGO, dentry, regset); +} + +struct bcm2835_pll_data { + const char *name; + u32 cm_ctrl_reg; + u32 a2w_ctrl_reg; + u32 frac_reg; + u32 ana_reg_base; + u32 reference_enable_mask; + /* Bit in CM_LOCK to indicate when the PLL has locked. */ + u32 lock_mask; + u32 flags; + + const struct bcm2835_pll_ana_bits *ana; + + unsigned long min_rate; + unsigned long max_rate; + /* + * Highest rate for the VCO before we have to use the + * pre-divide-by-2. + */ + unsigned long max_fb_rate; +}; + +struct bcm2835_pll_ana_bits { + u32 mask0; + u32 set0; + u32 mask1; + u32 set1; + u32 mask3; + u32 set3; + u32 fb_prediv_mask; +}; + +static const struct bcm2835_pll_ana_bits bcm2835_ana_default = { + .mask0 = 0, + .set0 = 0, + .mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK, + .set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT), + .mask3 = A2W_PLL_KA_MASK, + .set3 = (2 << A2W_PLL_KA_SHIFT), + .fb_prediv_mask = BIT(14), +}; + +static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = { + .mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK, + .set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT), + .mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK, + .set1 = (6 << A2W_PLLH_KP_SHIFT), + .mask3 = 0, + .set3 = 0, + .fb_prediv_mask = BIT(11), +}; + +struct bcm2835_pll_divider_data { + const char *name; + const char *source_pll; + + u32 cm_reg; + u32 a2w_reg; + + u32 load_mask; + u32 hold_mask; + u32 fixed_divider; + u32 flags; +}; + +struct bcm2835_clock_data { + const char *name; + + const char *const *parents; + int num_mux_parents; + + /* Bitmap encoding which parents accept rate change propagation. */ + unsigned int set_rate_parent; + + u32 ctl_reg; + u32 div_reg; + + /* Number of integer bits in the divider */ + u32 int_bits; + /* Number of fractional bits in the divider */ + u32 frac_bits; + + u32 flags; + + bool is_vpu_clock; + bool is_mash_clock; + bool low_jitter; + + u32 tcnt_mux; + + bool round_up; +}; + +struct bcm2835_gate_data { + const char *name; + const char *parent; + + u32 ctl_reg; +}; + +struct bcm2835_pll { + struct clk_hw hw; + struct bcm2835_cprman *cprman; + const struct bcm2835_pll_data *data; +}; + +static int bcm2835_pll_is_on(struct clk_hw *hw) +{ + struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); + struct bcm2835_cprman *cprman = pll->cprman; + const struct bcm2835_pll_data *data = pll->data; + + return cprman_read(cprman, data->a2w_ctrl_reg) & + A2W_PLL_CTRL_PRST_DISABLE; +} + +static u32 bcm2835_pll_get_prediv_mask(struct bcm2835_cprman *cprman, + const struct bcm2835_pll_data *data) +{ + /* + * On BCM2711 there isn't a pre-divisor available in the PLL feedback + * loop. Bits 13:14 of ANA1 (PLLA,PLLB,PLLC,PLLD) have been re-purposed + * for to for VCO RANGE bits. + */ + if (cprman->soc & SOC_BCM2711) + return 0; + + return data->ana->fb_prediv_mask; +} + +static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate, + unsigned long parent_rate, + u32 *ndiv, u32 *fdiv) +{ + u64 div; + + div = (u64)rate << A2W_PLL_FRAC_BITS; + do_div(div, parent_rate); + + *ndiv = div >> A2W_PLL_FRAC_BITS; + *fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1); +} + +static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate, + u32 ndiv, u32 fdiv, u32 pdiv) +{ + u64 rate; + + if (pdiv == 0) + return 0; + + rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv); + do_div(rate, pdiv); + return rate >> A2W_PLL_FRAC_BITS; +} + +static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); + const struct bcm2835_pll_data *data = pll->data; + u32 ndiv, fdiv; + + rate = clamp(rate, data->min_rate, data->max_rate); + + bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv); + + return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1); +} + +static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); + struct bcm2835_cprman *cprman = pll->cprman; + const struct bcm2835_pll_data *data = pll->data; + u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg); + u32 ndiv, pdiv, fdiv; + bool using_prediv; + + if (parent_rate == 0) + return 0; + + fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK; + ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT; + pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT; + using_prediv = cprman_read(cprman, data->ana_reg_base + 4) & + bcm2835_pll_get_prediv_mask(cprman, data); + + if (using_prediv) { + ndiv *= 2; + fdiv *= 2; + } + + return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv); +} + +static void bcm2835_pll_off(struct clk_hw *hw) +{ + struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); + struct bcm2835_cprman *cprman = pll->cprman; + const struct bcm2835_pll_data *data = pll->data; + + spin_lock(&cprman->regs_lock); + cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST); + cprman_write(cprman, data->a2w_ctrl_reg, + cprman_read(cprman, data->a2w_ctrl_reg) | + A2W_PLL_CTRL_PWRDN); + spin_unlock(&cprman->regs_lock); +} + +static int bcm2835_pll_on(struct clk_hw *hw) +{ + struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); + struct bcm2835_cprman *cprman = pll->cprman; + const struct bcm2835_pll_data *data = pll->data; + ktime_t timeout; + + cprman_write(cprman, data->a2w_ctrl_reg, + cprman_read(cprman, data->a2w_ctrl_reg) & + ~A2W_PLL_CTRL_PWRDN); + + /* Take the PLL out of reset. */ + spin_lock(&cprman->regs_lock); + cprman_write(cprman, data->cm_ctrl_reg, + cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST); + spin_unlock(&cprman->regs_lock); + + /* Wait for the PLL to lock. */ + timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); + while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) { + if (ktime_after(ktime_get(), timeout)) { + dev_err(cprman->dev, "%s: couldn't lock PLL\n", + clk_hw_get_name(hw)); + return -ETIMEDOUT; + } + + cpu_relax(); + } + + cprman_write(cprman, data->a2w_ctrl_reg, + cprman_read(cprman, data->a2w_ctrl_reg) | + A2W_PLL_CTRL_PRST_DISABLE); + + return 0; +} + +static void +bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana) +{ + int i; + + /* + * ANA register setup is done as a series of writes to + * ANA3-ANA0, in that order. This lets us write all 4 + * registers as a single cycle of the serdes interface (taking + * 100 xosc clocks), whereas if we were to update ana0, 1, and + * 3 individually through their partial-write registers, each + * would be their own serdes cycle. + */ + for (i = 3; i >= 0; i--) + cprman_write(cprman, ana_reg_base + i * 4, ana[i]); +} + +static int bcm2835_pll_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); + struct bcm2835_cprman *cprman = pll->cprman; + const struct bcm2835_pll_data *data = pll->data; + u32 prediv_mask = bcm2835_pll_get_prediv_mask(cprman, data); + bool was_using_prediv, use_fb_prediv, do_ana_setup_first; + u32 ndiv, fdiv, a2w_ctl; + u32 ana[4]; + int i; + + if (rate > data->max_fb_rate) { + use_fb_prediv = true; + rate /= 2; + } else { + use_fb_prediv = false; + } + + bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv); + + for (i = 3; i >= 0; i--) + ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4); + + was_using_prediv = ana[1] & prediv_mask; + + ana[0] &= ~data->ana->mask0; + ana[0] |= data->ana->set0; + ana[1] &= ~data->ana->mask1; + ana[1] |= data->ana->set1; + ana[3] &= ~data->ana->mask3; + ana[3] |= data->ana->set3; + + if (was_using_prediv && !use_fb_prediv) { + ana[1] &= ~prediv_mask; + do_ana_setup_first = true; + } else if (!was_using_prediv && use_fb_prediv) { + ana[1] |= prediv_mask; + do_ana_setup_first = false; + } else { + do_ana_setup_first = true; + } + + /* Unmask the reference clock from the oscillator. */ + spin_lock(&cprman->regs_lock); + cprman_write(cprman, A2W_XOSC_CTRL, + cprman_read(cprman, A2W_XOSC_CTRL) | + data->reference_enable_mask); + spin_unlock(&cprman->regs_lock); + + if (do_ana_setup_first) + bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana); + + /* Set the PLL multiplier from the oscillator. */ + cprman_write(cprman, data->frac_reg, fdiv); + + a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg); + a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK; + a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT; + a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK; + a2w_ctl |= 1 << A2W_PLL_CTRL_PDIV_SHIFT; + cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl); + + if (!do_ana_setup_first) + bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana); + + return 0; +} + +static void bcm2835_pll_debug_init(struct clk_hw *hw, + struct dentry *dentry) +{ + struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); + struct bcm2835_cprman *cprman = pll->cprman; + const struct bcm2835_pll_data *data = pll->data; + struct debugfs_reg32 *regs; + + regs = devm_kcalloc(cprman->dev, 7, sizeof(*regs), GFP_KERNEL); + if (!regs) + return; + + regs[0].name = "cm_ctrl"; + regs[0].offset = data->cm_ctrl_reg; + regs[1].name = "a2w_ctrl"; + regs[1].offset = data->a2w_ctrl_reg; + regs[2].name = "frac"; + regs[2].offset = data->frac_reg; + regs[3].name = "ana0"; + regs[3].offset = data->ana_reg_base + 0 * 4; + regs[4].name = "ana1"; + regs[4].offset = data->ana_reg_base + 1 * 4; + regs[5].name = "ana2"; + regs[5].offset = data->ana_reg_base + 2 * 4; + regs[6].name = "ana3"; + regs[6].offset = data->ana_reg_base + 3 * 4; + + bcm2835_debugfs_regset(cprman, 0, regs, 7, dentry); +} + +static const struct clk_ops bcm2835_pll_clk_ops = { + .is_prepared = bcm2835_pll_is_on, + .prepare = bcm2835_pll_on, + .unprepare = bcm2835_pll_off, + .recalc_rate = bcm2835_pll_get_rate, + .set_rate = bcm2835_pll_set_rate, + .round_rate = bcm2835_pll_round_rate, + .debug_init = bcm2835_pll_debug_init, +}; + +struct bcm2835_pll_divider { + struct clk_divider div; + struct bcm2835_cprman *cprman; + const struct bcm2835_pll_divider_data *data; +}; + +static struct bcm2835_pll_divider * +bcm2835_pll_divider_from_hw(struct clk_hw *hw) +{ + return container_of(hw, struct bcm2835_pll_divider, div.hw); +} + +static int bcm2835_pll_divider_is_on(struct clk_hw *hw) +{ + struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw); + struct bcm2835_cprman *cprman = divider->cprman; + const struct bcm2835_pll_divider_data *data = divider->data; + + return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE); +} + +static int bcm2835_pll_divider_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + return clk_divider_ops.determine_rate(hw, req); +} + +static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return clk_divider_ops.recalc_rate(hw, parent_rate); +} + +static void bcm2835_pll_divider_off(struct clk_hw *hw) +{ + struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw); + struct bcm2835_cprman *cprman = divider->cprman; + const struct bcm2835_pll_divider_data *data = divider->data; + + spin_lock(&cprman->regs_lock); + cprman_write(cprman, data->cm_reg, + (cprman_read(cprman, data->cm_reg) & + ~data->load_mask) | data->hold_mask); + cprman_write(cprman, data->a2w_reg, + cprman_read(cprman, data->a2w_reg) | + A2W_PLL_CHANNEL_DISABLE); + spin_unlock(&cprman->regs_lock); +} + +static int bcm2835_pll_divider_on(struct clk_hw *hw) +{ + struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw); + struct bcm2835_cprman *cprman = divider->cprman; + const struct bcm2835_pll_divider_data *data = divider->data; + + spin_lock(&cprman->regs_lock); + cprman_write(cprman, data->a2w_reg, + cprman_read(cprman, data->a2w_reg) & + ~A2W_PLL_CHANNEL_DISABLE); + + cprman_write(cprman, data->cm_reg, + cprman_read(cprman, data->cm_reg) & ~data->hold_mask); + spin_unlock(&cprman->regs_lock); + + return 0; +} + +static int bcm2835_pll_divider_set_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw); + struct bcm2835_cprman *cprman = divider->cprman; + const struct bcm2835_pll_divider_data *data = divider->data; + u32 cm, div, max_div = 1 << A2W_PLL_DIV_BITS; + + div = DIV_ROUND_UP_ULL(parent_rate, rate); + + div = min(div, max_div); + if (div == max_div) + div = 0; + + cprman_write(cprman, data->a2w_reg, div); + cm = cprman_read(cprman, data->cm_reg); + cprman_write(cprman, data->cm_reg, cm | data->load_mask); + cprman_write(cprman, data->cm_reg, cm & ~data->load_mask); + + return 0; +} + +static void bcm2835_pll_divider_debug_init(struct clk_hw *hw, + struct dentry *dentry) +{ + struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw); + struct bcm2835_cprman *cprman = divider->cprman; + const struct bcm2835_pll_divider_data *data = divider->data; + struct debugfs_reg32 *regs; + + regs = devm_kcalloc(cprman->dev, 7, sizeof(*regs), GFP_KERNEL); + if (!regs) + return; + + regs[0].name = "cm"; + regs[0].offset = data->cm_reg; + regs[1].name = "a2w"; + regs[1].offset = data->a2w_reg; + + bcm2835_debugfs_regset(cprman, 0, regs, 2, dentry); +} + +static const struct clk_ops bcm2835_pll_divider_clk_ops = { + .is_prepared = bcm2835_pll_divider_is_on, + .prepare = bcm2835_pll_divider_on, + .unprepare = bcm2835_pll_divider_off, + .recalc_rate = bcm2835_pll_divider_get_rate, + .set_rate = bcm2835_pll_divider_set_rate, + .determine_rate = bcm2835_pll_divider_determine_rate, + .debug_init = bcm2835_pll_divider_debug_init, +}; + +/* + * The CM dividers do fixed-point division, so we can't use the + * generic integer divider code like the PLL dividers do (and we can't + * fake it by having some fixed shifts preceding it in the clock tree, + * because we'd run out of bits in a 32-bit unsigned long). + */ +struct bcm2835_clock { + struct clk_hw hw; + struct bcm2835_cprman *cprman; + const struct bcm2835_clock_data *data; +}; + +static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw) +{ + return container_of(hw, struct bcm2835_clock, hw); +} + +static int bcm2835_clock_is_on(struct clk_hw *hw) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + + return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0; +} + +static u32 bcm2835_clock_choose_div(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + const struct bcm2835_clock_data *data = clock->data; + u32 unused_frac_mask = + GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1; + u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS; + u32 div, mindiv, maxdiv; + + do_div(temp, rate); + div = temp; + div &= ~unused_frac_mask; + + /* different clamping limits apply for a mash clock */ + if (data->is_mash_clock) { + /* clamp to min divider of 2 */ + mindiv = 2 << CM_DIV_FRAC_BITS; + /* clamp to the highest possible integer divider */ + maxdiv = (BIT(data->int_bits) - 1) << CM_DIV_FRAC_BITS; + } else { + /* clamp to min divider of 1 */ + mindiv = 1 << CM_DIV_FRAC_BITS; + /* clamp to the highest possible fractional divider */ + maxdiv = GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1, + CM_DIV_FRAC_BITS - data->frac_bits); + } + + /* apply the clamping limits */ + div = max_t(u32, div, mindiv); + div = min_t(u32, div, maxdiv); + + return div; +} + +static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock, + unsigned long parent_rate, + u32 div) +{ + const struct bcm2835_clock_data *data = clock->data; + u64 temp; + + if (data->int_bits == 0 && data->frac_bits == 0) + return parent_rate; + + /* + * The divisor is a 12.12 fixed point field, but only some of + * the bits are populated in any given clock. + */ + div >>= CM_DIV_FRAC_BITS - data->frac_bits; + div &= (1 << (data->int_bits + data->frac_bits)) - 1; + + if (div == 0) + return 0; + + temp = (u64)parent_rate << data->frac_bits; + + do_div(temp, div); + + return temp; +} + +static unsigned long bcm2835_round_rate(unsigned long rate) +{ + unsigned long scaler; + unsigned long limit; + + limit = rate / 100000; + + scaler = 1; + while (scaler < limit) + scaler *= 10; + + /* + * If increasing a clock by less than 0.1% changes it + * from ..999.. to ..000.., round up. + */ + if ((rate + scaler - 1) / scaler % 1000 == 0) + rate = roundup(rate, scaler); + + return rate; +} + +static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + unsigned long rate; + u32 div; + + if (data->int_bits == 0 && data->frac_bits == 0) + return parent_rate; + + div = cprman_read(cprman, data->div_reg); + + rate = bcm2835_clock_rate_from_divisor(clock, parent_rate, div); + + if (data->round_up) + rate = bcm2835_round_rate(rate); + + return rate; +} + +static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock) +{ + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + ktime_t timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); + + while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) { + if (ktime_after(ktime_get(), timeout)) { + dev_err(cprman->dev, "%s: couldn't lock PLL\n", + clk_hw_get_name(&clock->hw)); + return; + } + cpu_relax(); + } +} + +static void bcm2835_clock_off(struct clk_hw *hw) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + + spin_lock(&cprman->regs_lock); + cprman_write(cprman, data->ctl_reg, + cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE); + spin_unlock(&cprman->regs_lock); + + /* BUSY will remain high until the divider completes its cycle. */ + bcm2835_clock_wait_busy(clock); +} + +static int bcm2835_clock_on(struct clk_hw *hw) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + + spin_lock(&cprman->regs_lock); + cprman_write(cprman, data->ctl_reg, + cprman_read(cprman, data->ctl_reg) | + CM_ENABLE | + CM_GATE); + spin_unlock(&cprman->regs_lock); + + /* Debug code to measure the clock once it's turned on to see + * if it's ticking at the rate we expect. + */ + if (data->tcnt_mux && false) { + dev_info(cprman->dev, + "clk %s: rate %ld, measure %ld\n", + data->name, + clk_hw_get_rate(hw), + bcm2835_measure_tcnt_mux(cprman, data->tcnt_mux)); + } + + return 0; +} + +static int bcm2835_clock_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate); + u32 ctl; + + spin_lock(&cprman->regs_lock); + + /* + * Setting up frac support + * + * In principle it is recommended to stop/start the clock first, + * but as we set CLK_SET_RATE_GATE during registration of the + * clock this requirement should be take care of by the + * clk-framework. + */ + ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC; + ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0; + cprman_write(cprman, data->ctl_reg, ctl); + + cprman_write(cprman, data->div_reg, div); + + spin_unlock(&cprman->regs_lock); + + return 0; +} + +static bool +bcm2835_clk_is_pllc(struct clk_hw *hw) +{ + if (!hw) + return false; + + return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0; +} + +static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, + int parent_idx, + unsigned long rate, + u32 *div, + unsigned long *prate, + unsigned long *avgrate) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + unsigned long best_rate = 0; + u32 curdiv, mindiv, maxdiv; + struct clk_hw *parent; + + parent = clk_hw_get_parent_by_index(hw, parent_idx); + + if (!(BIT(parent_idx) & data->set_rate_parent)) { + *prate = clk_hw_get_rate(parent); + *div = bcm2835_clock_choose_div(hw, rate, *prate); + + *avgrate = bcm2835_clock_rate_from_divisor(clock, *prate, *div); + + if (data->low_jitter && (*div & CM_DIV_FRAC_MASK)) { + unsigned long high, low; + u32 int_div = *div & ~CM_DIV_FRAC_MASK; + + high = bcm2835_clock_rate_from_divisor(clock, *prate, + int_div); + int_div += CM_DIV_FRAC_MASK + 1; + low = bcm2835_clock_rate_from_divisor(clock, *prate, + int_div); + + /* + * Return a value which is the maximum deviation + * below the ideal rate, for use as a metric. + */ + return *avgrate - max(*avgrate - low, high - *avgrate); + } + return *avgrate; + } + + if (data->frac_bits) + dev_warn(cprman->dev, + "frac bits are not used when propagating rate change"); + + /* clamp to min divider of 2 if we're dealing with a mash clock */ + mindiv = data->is_mash_clock ? 2 : 1; + maxdiv = BIT(data->int_bits) - 1; + + /* TODO: Be smart, and only test a subset of the available divisors. */ + for (curdiv = mindiv; curdiv <= maxdiv; curdiv++) { + unsigned long tmp_rate; + + tmp_rate = clk_hw_round_rate(parent, rate * curdiv); + tmp_rate /= curdiv; + if (curdiv == mindiv || + (tmp_rate > best_rate && tmp_rate <= rate)) + best_rate = tmp_rate; + + if (best_rate == rate) + break; + } + + *div = curdiv << CM_DIV_FRAC_BITS; + *prate = curdiv * best_rate; + *avgrate = best_rate; + + return best_rate; +} + +static int bcm2835_clock_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct clk_hw *parent, *best_parent = NULL; + bool current_parent_is_pllc; + unsigned long rate, best_rate = 0; + unsigned long prate, best_prate = 0; + unsigned long avgrate, best_avgrate = 0; + size_t i; + u32 div; + + current_parent_is_pllc = bcm2835_clk_is_pllc(clk_hw_get_parent(hw)); + + /* + * Select parent clock that results in the closest but lower rate + */ + for (i = 0; i < clk_hw_get_num_parents(hw); ++i) { + parent = clk_hw_get_parent_by_index(hw, i); + if (!parent) + continue; + + /* + * Don't choose a PLLC-derived clock as our parent + * unless it had been manually set that way. PLLC's + * frequency gets adjusted by the firmware due to + * over-temp or under-voltage conditions, without + * prior notification to our clock consumer. + */ + if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc) + continue; + + rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate, + &div, &prate, + &avgrate); + if (abs(req->rate - rate) < abs(req->rate - best_rate)) { + best_parent = parent; + best_prate = prate; + best_rate = rate; + best_avgrate = avgrate; + } + } + + if (!best_parent) + return -EINVAL; + + req->best_parent_hw = best_parent; + req->best_parent_rate = best_prate; + + req->rate = best_avgrate; + + return 0; +} + +static int bcm2835_clock_set_parent(struct clk_hw *hw, u8 index) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + u8 src = (index << CM_SRC_SHIFT) & CM_SRC_MASK; + + cprman_write(cprman, data->ctl_reg, src); + return 0; +} + +static u8 bcm2835_clock_get_parent(struct clk_hw *hw) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + u32 src = cprman_read(cprman, data->ctl_reg); + + return (src & CM_SRC_MASK) >> CM_SRC_SHIFT; +} + +static const struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = { + { + .name = "ctl", + .offset = 0, + }, + { + .name = "div", + .offset = 4, + }, +}; + +static void bcm2835_clock_debug_init(struct clk_hw *hw, + struct dentry *dentry) +{ + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; + + bcm2835_debugfs_regset(cprman, data->ctl_reg, + bcm2835_debugfs_clock_reg32, + ARRAY_SIZE(bcm2835_debugfs_clock_reg32), + dentry); +} + +static const struct clk_ops bcm2835_clock_clk_ops = { + .is_prepared = bcm2835_clock_is_on, + .prepare = bcm2835_clock_on, + .unprepare = bcm2835_clock_off, + .recalc_rate = bcm2835_clock_get_rate, + .set_rate = bcm2835_clock_set_rate, + .determine_rate = bcm2835_clock_determine_rate, + .set_parent = bcm2835_clock_set_parent, + .get_parent = bcm2835_clock_get_parent, + .debug_init = bcm2835_clock_debug_init, +}; + +static int bcm2835_vpu_clock_is_on(struct clk_hw *hw) +{ + return true; +} + +/* + * The VPU clock can never be disabled (it doesn't have an ENABLE + * bit), so it gets its own set of clock ops. + */ +static const struct clk_ops bcm2835_vpu_clock_clk_ops = { + .is_prepared = bcm2835_vpu_clock_is_on, + .recalc_rate = bcm2835_clock_get_rate, + .set_rate = bcm2835_clock_set_rate, + .determine_rate = bcm2835_clock_determine_rate, + .set_parent = bcm2835_clock_set_parent, + .get_parent = bcm2835_clock_get_parent, + .debug_init = bcm2835_clock_debug_init, +}; + +static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, + const void *data) +{ + const struct bcm2835_pll_data *pll_data = data; + struct bcm2835_pll *pll; + struct clk_init_data init; + int ret; + + memset(&init, 0, sizeof(init)); + + /* All of the PLLs derive from the external oscillator. */ + init.parent_names = &cprman->real_parent_names[0]; + init.num_parents = 1; + init.name = pll_data->name; + init.ops = &bcm2835_pll_clk_ops; + init.flags = pll_data->flags | CLK_IGNORE_UNUSED; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return NULL; + + pll->cprman = cprman; + pll->data = pll_data; + pll->hw.init = &init; + + ret = devm_clk_hw_register(cprman->dev, &pll->hw); + if (ret) { + kfree(pll); + return NULL; + } + return &pll->hw; +} + +static struct clk_hw * +bcm2835_register_pll_divider(struct bcm2835_cprman *cprman, + const void *data) +{ + const struct bcm2835_pll_divider_data *divider_data = data; + struct bcm2835_pll_divider *divider; + struct clk_init_data init; + const char *divider_name; + int ret; + + if (divider_data->fixed_divider != 1) { + divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL, + "%s_prediv", divider_data->name); + if (!divider_name) + return NULL; + } else { + divider_name = divider_data->name; + } + + memset(&init, 0, sizeof(init)); + + init.parent_names = ÷r_data->source_pll; + init.num_parents = 1; + init.name = divider_name; + init.ops = &bcm2835_pll_divider_clk_ops; + init.flags = divider_data->flags | CLK_IGNORE_UNUSED; + + divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL); + if (!divider) + return NULL; + + divider->div.reg = cprman->regs + divider_data->a2w_reg; + divider->div.shift = A2W_PLL_DIV_SHIFT; + divider->div.width = A2W_PLL_DIV_BITS; + divider->div.flags = CLK_DIVIDER_MAX_AT_ZERO; + divider->div.lock = &cprman->regs_lock; + divider->div.hw.init = &init; + divider->div.table = NULL; + + divider->cprman = cprman; + divider->data = divider_data; + + ret = devm_clk_hw_register(cprman->dev, ÷r->div.hw); + if (ret) + return ERR_PTR(ret); + + /* + * PLLH's channels have a fixed divide by 10 afterwards, which + * is what our consumers are actually using. + */ + if (divider_data->fixed_divider != 1) { + return clk_hw_register_fixed_factor(cprman->dev, + divider_data->name, + divider_name, + CLK_SET_RATE_PARENT, + 1, + divider_data->fixed_divider); + } + + return ÷r->div.hw; +} + +static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman, + const void *data) +{ + const struct bcm2835_clock_data *clock_data = data; + struct bcm2835_clock *clock; + struct clk_init_data init; + const char *parents[1 << CM_SRC_BITS]; + size_t i; + int ret; + + /* + * Replace our strings referencing parent clocks with the + * actual clock-output-name of the parent. + */ + for (i = 0; i < clock_data->num_mux_parents; i++) { + parents[i] = clock_data->parents[i]; + + ret = match_string(cprman_parent_names, + ARRAY_SIZE(cprman_parent_names), + parents[i]); + if (ret >= 0) + parents[i] = cprman->real_parent_names[ret]; + } + + memset(&init, 0, sizeof(init)); + init.parent_names = parents; + init.num_parents = clock_data->num_mux_parents; + init.name = clock_data->name; + init.flags = clock_data->flags | CLK_IGNORE_UNUSED; + + /* + * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate + * rate changes on at least of the parents. + */ + if (clock_data->set_rate_parent) + init.flags |= CLK_SET_RATE_PARENT; + + if (clock_data->is_vpu_clock) { + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { + init.ops = &bcm2835_clock_clk_ops; + init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE; + + /* If the clock wasn't actually enabled at boot, it's not + * critical. + */ + if (!(cprman_read(cprman, clock_data->ctl_reg) & CM_ENABLE)) + init.flags &= ~CLK_IS_CRITICAL; + } + + clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL); + if (!clock) + return NULL; + + clock->cprman = cprman; + clock->data = clock_data; + clock->hw.init = &init; + + ret = devm_clk_hw_register(cprman->dev, &clock->hw); + if (ret) + return ERR_PTR(ret); + return &clock->hw; +} + +static struct clk_hw *bcm2835_register_gate(struct bcm2835_cprman *cprman, + const void *data) +{ + const struct bcm2835_gate_data *gate_data = data; + + return clk_hw_register_gate(cprman->dev, gate_data->name, + gate_data->parent, + CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, + cprman->regs + gate_data->ctl_reg, + CM_GATE_BIT, 0, &cprman->regs_lock); +} + +struct bcm2835_clk_desc { + struct clk_hw *(*clk_register)(struct bcm2835_cprman *cprman, + const void *data); + unsigned int supported; + const void *data; +}; + +/* assignment helper macros for different clock types */ +#define _REGISTER(f, s, ...) { .clk_register = f, \ + .supported = s, \ + .data = __VA_ARGS__ } +#define REGISTER_PLL(s, ...) _REGISTER(&bcm2835_register_pll, \ + s, \ + &(struct bcm2835_pll_data) \ + {__VA_ARGS__}) +#define REGISTER_PLL_DIV(s, ...) _REGISTER(&bcm2835_register_pll_divider, \ + s, \ + &(struct bcm2835_pll_divider_data) \ + {__VA_ARGS__}) +#define REGISTER_CLK(s, ...) _REGISTER(&bcm2835_register_clock, \ + s, \ + &(struct bcm2835_clock_data) \ + {__VA_ARGS__}) +#define REGISTER_GATE(s, ...) _REGISTER(&bcm2835_register_gate, \ + s, \ + &(struct bcm2835_gate_data) \ + {__VA_ARGS__}) + +/* parent mux arrays plus helper macros */ + +/* main oscillator parent mux */ +static const char *const bcm2835_clock_osc_parents[] = { + "gnd", + "xosc", + "testdebug0", + "testdebug1" +}; + +#define REGISTER_OSC_CLK(s, ...) REGISTER_CLK( \ + s, \ + .num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents), \ + .parents = bcm2835_clock_osc_parents, \ + __VA_ARGS__) + +/* main peripherial parent mux */ +static const char *const bcm2835_clock_per_parents[] = { + "gnd", + "xosc", + "testdebug0", + "testdebug1", + "plla_per", + "pllc_per", + "plld_per", + "pllh_aux", +}; + +#define REGISTER_PER_CLK(s, ...) REGISTER_CLK( \ + s, \ + .num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents), \ + .parents = bcm2835_clock_per_parents, \ + __VA_ARGS__) + +/* + * Restrict clock sources for the PCM peripheral to the oscillator and + * PLLD_PER because other source may have varying rates or be switched + * off. + * + * Prevent other sources from being selected by replacing their names in + * the list of potential parents with dummy entries (entry index is + * significant). + */ +static const char *const bcm2835_pcm_per_parents[] = { + "-", + "xosc", + "-", + "-", + "-", + "-", + "plld_per", + "-", +}; + +#define REGISTER_PCM_CLK(s, ...) REGISTER_CLK( \ + s, \ + .num_mux_parents = ARRAY_SIZE(bcm2835_pcm_per_parents), \ + .parents = bcm2835_pcm_per_parents, \ + __VA_ARGS__) + +/* main vpu parent mux */ +static const char *const bcm2835_clock_vpu_parents[] = { + "gnd", + "xosc", + "testdebug0", + "testdebug1", + "plla_core", + "pllc_core0", + "plld_core", + "pllh_aux", + "pllc_core1", + "pllc_core2", +}; + +#define REGISTER_VPU_CLK(s, ...) REGISTER_CLK( \ + s, \ + .num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents), \ + .parents = bcm2835_clock_vpu_parents, \ + __VA_ARGS__) + +/* + * DSI parent clocks. The DSI byte/DDR/DDR2 clocks come from the DSI + * analog PHY. The _inv variants are generated internally to cprman, + * but we don't use them so they aren't hooked up. + */ +static const char *const bcm2835_clock_dsi0_parents[] = { + "gnd", + "xosc", + "testdebug0", + "testdebug1", + "dsi0_ddr", + "dsi0_ddr_inv", + "dsi0_ddr2", + "dsi0_ddr2_inv", + "dsi0_byte", + "dsi0_byte_inv", +}; + +static const char *const bcm2835_clock_dsi1_parents[] = { + "gnd", + "xosc", + "testdebug0", + "testdebug1", + "dsi1_ddr", + "dsi1_ddr_inv", + "dsi1_ddr2", + "dsi1_ddr2_inv", + "dsi1_byte", + "dsi1_byte_inv", +}; + +#define REGISTER_DSI0_CLK(s, ...) REGISTER_CLK( \ + s, \ + .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents), \ + .parents = bcm2835_clock_dsi0_parents, \ + __VA_ARGS__) + +#define REGISTER_DSI1_CLK(s, ...) REGISTER_CLK( \ + s, \ + .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents), \ + .parents = bcm2835_clock_dsi1_parents, \ + __VA_ARGS__) + +/* + * the real definition of all the pll, pll_dividers and clocks + * these make use of the above REGISTER_* macros + */ +static const struct bcm2835_clk_desc clk_desc_array[] = { + /* the PLL + PLL dividers */ + + /* + * PLLA is the auxiliary PLL, used to drive the CCP2 + * (Compact Camera Port 2) transmitter clock. + * + * It is in the PX LDO power domain, which is on when the + * AUDIO domain is on. + */ + [BCM2835_PLLA] = REGISTER_PLL( + SOC_ALL, + .name = "plla", + .cm_ctrl_reg = CM_PLLA, + .a2w_ctrl_reg = A2W_PLLA_CTRL, + .frac_reg = A2W_PLLA_FRAC, + .ana_reg_base = A2W_PLLA_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE, + .lock_mask = CM_LOCK_FLOCKA, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 2400000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE), + [BCM2835_PLLA_CORE] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plla_core", + .source_pll = "plla", + .cm_reg = CM_PLLA, + .a2w_reg = A2W_PLLA_CORE, + .load_mask = CM_PLLA_LOADCORE, + .hold_mask = CM_PLLA_HOLDCORE, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_PER] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plla_per", + .source_pll = "plla", + .cm_reg = CM_PLLA, + .a2w_reg = A2W_PLLA_PER, + .load_mask = CM_PLLA_LOADPER, + .hold_mask = CM_PLLA_HOLDPER, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plla_dsi0", + .source_pll = "plla", + .cm_reg = CM_PLLA, + .a2w_reg = A2W_PLLA_DSI0, + .load_mask = CM_PLLA_LOADDSI0, + .hold_mask = CM_PLLA_HOLDDSI0, + .fixed_divider = 1), + [BCM2835_PLLA_CCP2] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plla_ccp2", + .source_pll = "plla", + .cm_reg = CM_PLLA, + .a2w_reg = A2W_PLLA_CCP2, + .load_mask = CM_PLLA_LOADCCP2, + .hold_mask = CM_PLLA_HOLDCCP2, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( + SOC_ALL, + .name = "pllb", + .cm_ctrl_reg = CM_PLLB, + .a2w_ctrl_reg = A2W_PLLB_CTRL, + .frac_reg = A2W_PLLB_FRAC, + .ana_reg_base = A2W_PLLB_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, + .lock_mask = CM_LOCK_FLOCKB, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE, + .flags = CLK_GET_RATE_NOCACHE), + [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllb_arm", + .source_pll = "pllb", + .cm_reg = CM_PLLB, + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE), + + /* + * PLLC is the core PLL, used to drive the core VPU clock. + * + * It is in the PX LDO power domain, which is on when the + * AUDIO domain is on. + */ + [BCM2835_PLLC] = REGISTER_PLL( + SOC_ALL, + .name = "pllc", + .cm_ctrl_reg = CM_PLLC, + .a2w_ctrl_reg = A2W_PLLC_CTRL, + .frac_reg = A2W_PLLC_FRAC, + .ana_reg_base = A2W_PLLC_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE, + .lock_mask = CM_LOCK_FLOCKC, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE), + [BCM2835_PLLC_CORE0] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllc_core0", + .source_pll = "pllc", + .cm_reg = CM_PLLC, + .a2w_reg = A2W_PLLC_CORE0, + .load_mask = CM_PLLC_LOADCORE0, + .hold_mask = CM_PLLC_HOLDCORE0, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllc_core1", + .source_pll = "pllc", + .cm_reg = CM_PLLC, + .a2w_reg = A2W_PLLC_CORE1, + .load_mask = CM_PLLC_LOADCORE1, + .hold_mask = CM_PLLC_HOLDCORE1, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllc_core2", + .source_pll = "pllc", + .cm_reg = CM_PLLC, + .a2w_reg = A2W_PLLC_CORE2, + .load_mask = CM_PLLC_LOADCORE2, + .hold_mask = CM_PLLC_HOLDCORE2, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_PER] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllc_per", + .source_pll = "pllc", + .cm_reg = CM_PLLC, + .a2w_reg = A2W_PLLC_PER, + .load_mask = CM_PLLC_LOADPER, + .hold_mask = CM_PLLC_HOLDPER, + .fixed_divider = 1, + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), + + /* + * PLLD is the display PLL, used to drive DSI display panels. + * + * It is in the PX LDO power domain, which is on when the + * AUDIO domain is on. + */ + [BCM2835_PLLD] = REGISTER_PLL( + SOC_ALL, + .name = "plld", + .cm_ctrl_reg = CM_PLLD, + .a2w_ctrl_reg = A2W_PLLD_CTRL, + .frac_reg = A2W_PLLD_FRAC, + .ana_reg_base = A2W_PLLD_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE, + .lock_mask = CM_LOCK_FLOCKD, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 2400000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE), + [BCM2835_PLLD_CORE] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plld_core", + .source_pll = "plld", + .cm_reg = CM_PLLD, + .a2w_reg = A2W_PLLD_CORE, + .load_mask = CM_PLLD_LOADCORE, + .hold_mask = CM_PLLD_HOLDCORE, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + /* + * VPU firmware assumes that PLLD_PER isn't disabled by the ARM core. + * Otherwise this could cause firmware lookups. That's why we mark + * it as critical. + */ + [BCM2835_PLLD_PER] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plld_per", + .source_pll = "plld", + .cm_reg = CM_PLLD, + .a2w_reg = A2W_PLLD_PER, + .load_mask = CM_PLLD_LOADPER, + .hold_mask = CM_PLLD_HOLDPER, + .fixed_divider = 1, + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), + [BCM2835_PLLD_DSI0] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plld_dsi0", + .source_pll = "plld", + .cm_reg = CM_PLLD, + .a2w_reg = A2W_PLLD_DSI0, + .load_mask = CM_PLLD_LOADDSI0, + .hold_mask = CM_PLLD_HOLDDSI0, + .fixed_divider = 1), + [BCM2835_PLLD_DSI1] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "plld_dsi1", + .source_pll = "plld", + .cm_reg = CM_PLLD, + .a2w_reg = A2W_PLLD_DSI1, + .load_mask = CM_PLLD_LOADDSI1, + .hold_mask = CM_PLLD_HOLDDSI1, + .fixed_divider = 1), + + /* + * PLLH is used to supply the pixel clock or the AUX clock for the + * TV encoder. + * + * It is in the HDMI power domain. + */ + [BCM2835_PLLH] = REGISTER_PLL( + SOC_BCM2835, + "pllh", + .cm_ctrl_reg = CM_PLLH, + .a2w_ctrl_reg = A2W_PLLH_CTRL, + .frac_reg = A2W_PLLH_FRAC, + .ana_reg_base = A2W_PLLH_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE, + .lock_mask = CM_LOCK_FLOCKH, + + .ana = &bcm2835_ana_pllh, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE), + [BCM2835_PLLH_RCAL] = REGISTER_PLL_DIV( + SOC_BCM2835, + .name = "pllh_rcal", + .source_pll = "pllh", + .cm_reg = CM_PLLH, + .a2w_reg = A2W_PLLH_RCAL, + .load_mask = CM_PLLH_LOADRCAL, + .hold_mask = 0, + .fixed_divider = 10, + .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_AUX] = REGISTER_PLL_DIV( + SOC_BCM2835, + .name = "pllh_aux", + .source_pll = "pllh", + .cm_reg = CM_PLLH, + .a2w_reg = A2W_PLLH_AUX, + .load_mask = CM_PLLH_LOADAUX, + .hold_mask = 0, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( + SOC_BCM2835, + .name = "pllh_pix", + .source_pll = "pllh", + .cm_reg = CM_PLLH, + .a2w_reg = A2W_PLLH_PIX, + .load_mask = CM_PLLH_LOADPIX, + .hold_mask = 0, + .fixed_divider = 10, + .flags = CLK_SET_RATE_PARENT), + + /* the clocks */ + + /* clocks with oscillator parent mux */ + + /* One Time Programmable Memory clock. Maximum 10Mhz. */ + [BCM2835_CLOCK_OTP] = REGISTER_OSC_CLK( + SOC_ALL, + .name = "otp", + .ctl_reg = CM_OTPCTL, + .div_reg = CM_OTPDIV, + .int_bits = 4, + .frac_bits = 0, + .tcnt_mux = 6), + /* + * Used for a 1Mhz clock for the system clocksource, and also used + * bythe watchdog timer and the camera pulse generator. + */ + [BCM2835_CLOCK_TIMER] = REGISTER_OSC_CLK( + SOC_ALL, + .name = "timer", + .ctl_reg = CM_TIMERCTL, + .div_reg = CM_TIMERDIV, + .int_bits = 6, + .frac_bits = 12), + /* + * Clock for the temperature sensor. + * Generally run at 2Mhz, max 5Mhz. + */ + [BCM2835_CLOCK_TSENS] = REGISTER_OSC_CLK( + SOC_ALL, + .name = "tsens", + .ctl_reg = CM_TSENSCTL, + .div_reg = CM_TSENSDIV, + .int_bits = 5, + .frac_bits = 0), + [BCM2835_CLOCK_TEC] = REGISTER_OSC_CLK( + SOC_ALL, + .name = "tec", + .ctl_reg = CM_TECCTL, + .div_reg = CM_TECDIV, + .int_bits = 6, + .frac_bits = 0), + + /* clocks with vpu parent mux */ + [BCM2835_CLOCK_H264] = REGISTER_VPU_CLK( + SOC_ALL, + .name = "h264", + .ctl_reg = CM_H264CTL, + .div_reg = CM_H264DIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 1), + [BCM2835_CLOCK_ISP] = REGISTER_VPU_CLK( + SOC_ALL, + .name = "isp", + .ctl_reg = CM_ISPCTL, + .div_reg = CM_ISPDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 2), + + /* + * Secondary SDRAM clock. Used for low-voltage modes when the PLL + * in the SDRAM controller can't be used. + */ + [BCM2835_CLOCK_SDRAM] = REGISTER_VPU_CLK( + SOC_ALL, + .name = "sdram", + .ctl_reg = CM_SDCCTL, + .div_reg = CM_SDCDIV, + .int_bits = 6, + .frac_bits = 0, + .tcnt_mux = 3), + [BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK( + SOC_ALL, + .name = "v3d", + .ctl_reg = CM_V3DCTL, + .div_reg = CM_V3DDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 4), + /* + * VPU clock. This doesn't have an enable bit, since it drives + * the bus for everything else, and is special so it doesn't need + * to be gated for rate changes. It is also known as "clk_audio" + * in various hardware documentation. + */ + [BCM2835_CLOCK_VPU] = REGISTER_VPU_CLK( + SOC_ALL, + .name = "vpu", + .ctl_reg = CM_VPUCTL, + .div_reg = CM_VPUDIV, + .int_bits = 12, + .frac_bits = 8, + .flags = CLK_IS_CRITICAL, + .is_vpu_clock = true, + .tcnt_mux = 5), + + /* clocks with per parent mux */ + [BCM2835_CLOCK_AVEO] = REGISTER_PER_CLK( + SOC_ALL, + .name = "aveo", + .ctl_reg = CM_AVEOCTL, + .div_reg = CM_AVEODIV, + .int_bits = 4, + .frac_bits = 0, + .tcnt_mux = 38), + [BCM2835_CLOCK_CAM0] = REGISTER_PER_CLK( + SOC_ALL, + .name = "cam0", + .ctl_reg = CM_CAM0CTL, + .div_reg = CM_CAM0DIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 14), + [BCM2835_CLOCK_CAM1] = REGISTER_PER_CLK( + SOC_ALL, + .name = "cam1", + .ctl_reg = CM_CAM1CTL, + .div_reg = CM_CAM1DIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 15), + [BCM2835_CLOCK_DFT] = REGISTER_PER_CLK( + SOC_ALL, + .name = "dft", + .ctl_reg = CM_DFTCTL, + .div_reg = CM_DFTDIV, + .int_bits = 5, + .frac_bits = 0), + [BCM2835_CLOCK_DPI] = REGISTER_PER_CLK( + SOC_ALL, + .name = "dpi", + .ctl_reg = CM_DPICTL, + .div_reg = CM_DPIDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 17), + + /* Arasan EMMC clock */ + [BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK( + SOC_ALL, + .name = "emmc", + .ctl_reg = CM_EMMCCTL, + .div_reg = CM_EMMCDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 39), + + /* EMMC2 clock (only available for BCM2711) */ + [BCM2711_CLOCK_EMMC2] = REGISTER_PER_CLK( + SOC_BCM2711, + .name = "emmc2", + .ctl_reg = CM_EMMC2CTL, + .div_reg = CM_EMMC2DIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 42), + + /* General purpose (GPIO) clocks */ + [BCM2835_CLOCK_GP0] = REGISTER_PER_CLK( + SOC_ALL, + .name = "gp0", + .ctl_reg = CM_GP0CTL, + .div_reg = CM_GP0DIV, + .int_bits = 12, + .frac_bits = 12, + .is_mash_clock = true, + .tcnt_mux = 20), + [BCM2835_CLOCK_GP1] = REGISTER_PER_CLK( + SOC_ALL, + .name = "gp1", + .ctl_reg = CM_GP1CTL, + .div_reg = CM_GP1DIV, + .int_bits = 12, + .frac_bits = 12, + .flags = CLK_IS_CRITICAL, + .is_mash_clock = true, + .tcnt_mux = 21), + [BCM2835_CLOCK_GP2] = REGISTER_PER_CLK( + SOC_ALL, + .name = "gp2", + .ctl_reg = CM_GP2CTL, + .div_reg = CM_GP2DIV, + .int_bits = 12, + .frac_bits = 12, + .flags = CLK_IS_CRITICAL), + + /* HDMI state machine */ + [BCM2835_CLOCK_HSM] = REGISTER_PER_CLK( + SOC_ALL, + .name = "hsm", + .ctl_reg = CM_HSMCTL, + .div_reg = CM_HSMDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 22), + [BCM2835_CLOCK_PCM] = REGISTER_PCM_CLK( + SOC_ALL, + .name = "pcm", + .ctl_reg = CM_PCMCTL, + .div_reg = CM_PCMDIV, + .int_bits = 12, + .frac_bits = 12, + .is_mash_clock = true, + .low_jitter = true, + .tcnt_mux = 23), + [BCM2835_CLOCK_PWM] = REGISTER_PER_CLK( + SOC_ALL, + .name = "pwm", + .ctl_reg = CM_PWMCTL, + .div_reg = CM_PWMDIV, + .int_bits = 12, + .frac_bits = 12, + .is_mash_clock = true, + .tcnt_mux = 24), + [BCM2835_CLOCK_SLIM] = REGISTER_PER_CLK( + SOC_ALL, + .name = "slim", + .ctl_reg = CM_SLIMCTL, + .div_reg = CM_SLIMDIV, + .int_bits = 12, + .frac_bits = 12, + .is_mash_clock = true, + .tcnt_mux = 25), + [BCM2835_CLOCK_SMI] = REGISTER_PER_CLK( + SOC_ALL, + .name = "smi", + .ctl_reg = CM_SMICTL, + .div_reg = CM_SMIDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 27), + [BCM2835_CLOCK_UART] = REGISTER_PER_CLK( + SOC_ALL, + .name = "uart", + .ctl_reg = CM_UARTCTL, + .div_reg = CM_UARTDIV, + .int_bits = 10, + .frac_bits = 12, + .tcnt_mux = 28, + .round_up = true), + + /* TV encoder clock. Only operating frequency is 108Mhz. */ + [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK( + SOC_ALL, + .name = "vec", + .ctl_reg = CM_VECCTL, + .div_reg = CM_VECDIV, + .int_bits = 4, + .frac_bits = 0, + /* + * Allow rate change propagation only on PLLH_AUX which is + * assigned index 7 in the parent array. + */ + .set_rate_parent = BIT(7), + .tcnt_mux = 29), + + /* dsi clocks */ + [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( + SOC_ALL, + .name = "dsi0e", + .ctl_reg = CM_DSI0ECTL, + .div_reg = CM_DSI0EDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 18), + [BCM2835_CLOCK_DSI1E] = REGISTER_PER_CLK( + SOC_ALL, + .name = "dsi1e", + .ctl_reg = CM_DSI1ECTL, + .div_reg = CM_DSI1EDIV, + .int_bits = 4, + .frac_bits = 8, + .tcnt_mux = 19), + [BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK( + SOC_ALL, + .name = "dsi0p", + .ctl_reg = CM_DSI0PCTL, + .div_reg = CM_DSI0PDIV, + .int_bits = 0, + .frac_bits = 0, + .tcnt_mux = 12), + [BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK( + SOC_ALL, + .name = "dsi1p", + .ctl_reg = CM_DSI1PCTL, + .div_reg = CM_DSI1PDIV, + .int_bits = 0, + .frac_bits = 0, + .tcnt_mux = 13), + + /* the gates */ + + /* + * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if + * you have the debug bit set in the power manager, which we + * don't bother exposing) are individual gates off of the + * non-stop vpu clock. + */ + [BCM2835_CLOCK_PERI_IMAGE] = REGISTER_GATE( + SOC_ALL, + .name = "peri_image", + .parent = "vpu", + .ctl_reg = CM_PERIICTL), +}; + +/* + * Permanently take a reference on the parent of the SDRAM clock. + * + * While the SDRAM is being driven by its dedicated PLL most of the + * time, there is a little loop running in the firmware that + * periodically switches the SDRAM to using our CM clock to do PVT + * recalibration, with the assumption that the previously configured + * SDRAM parent is still enabled and running. + */ +static int bcm2835_mark_sdc_parent_critical(struct clk *sdc) +{ + struct clk *parent = clk_get_parent(sdc); + + if (IS_ERR(parent)) + return PTR_ERR(parent); + + return clk_prepare_enable(parent); +} + +static int bcm2835_clk_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct clk_hw **hws; + struct bcm2835_cprman *cprman; + const struct bcm2835_clk_desc *desc; + const size_t asize = ARRAY_SIZE(clk_desc_array); + const struct cprman_plat_data *pdata; + size_t i; + int ret; + + pdata = of_device_get_match_data(&pdev->dev); + if (!pdata) + return -ENODEV; + + cprman = devm_kzalloc(dev, + struct_size(cprman, onecell.hws, asize), + GFP_KERNEL); + if (!cprman) + return -ENOMEM; + + spin_lock_init(&cprman->regs_lock); + cprman->dev = dev; + cprman->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(cprman->regs)) + return PTR_ERR(cprman->regs); + + memcpy(cprman->real_parent_names, cprman_parent_names, + sizeof(cprman_parent_names)); + of_clk_parent_fill(dev->of_node, cprman->real_parent_names, + ARRAY_SIZE(cprman_parent_names)); + + /* + * Make sure the external oscillator has been registered. + * + * The other (DSI) clocks are not present on older device + * trees, which we still need to support for backwards + * compatibility. + */ + if (!cprman->real_parent_names[0]) + return -ENODEV; + + platform_set_drvdata(pdev, cprman); + + cprman->onecell.num = asize; + cprman->soc = pdata->soc; + hws = cprman->onecell.hws; + + for (i = 0; i < asize; i++) { + desc = &clk_desc_array[i]; + if (desc->clk_register && desc->data && + (desc->supported & pdata->soc)) { + hws[i] = desc->clk_register(cprman, desc->data); + } + } + + ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk); + if (ret) + return ret; + + return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, + &cprman->onecell); +} + +static const struct cprman_plat_data cprman_bcm2835_plat_data = { + .soc = SOC_BCM2835, +}; + +static const struct cprman_plat_data cprman_bcm2711_plat_data = { + .soc = SOC_BCM2711, +}; + +static const struct of_device_id bcm2835_clk_of_match[] = { + { .compatible = "brcm,bcm2835-cprman", .data = &cprman_bcm2835_plat_data }, + { .compatible = "brcm,bcm2711-cprman", .data = &cprman_bcm2711_plat_data }, + {} +}; +MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match); + +static struct platform_driver bcm2835_clk_driver = { + .driver = { + .name = "bcm2835-clk", + .of_match_table = bcm2835_clk_of_match, + }, + .probe = bcm2835_clk_probe, +}; + +builtin_platform_driver(bcm2835_clk_driver); + +MODULE_AUTHOR("Eric Anholt <eric@anholt.net>"); +MODULE_DESCRIPTION("BCM2835 clock driver"); +MODULE_LICENSE("GPL"); |