diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/clk/ti/clk-3xxx.c | 353 |
1 files changed, 353 insertions, 0 deletions
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c new file mode 100644 index 000000000..ae943ea63 --- /dev/null +++ b/drivers/clk/ti/clk-3xxx.c @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * OMAP3 Clock init + * + * Copyright (C) 2013 Texas Instruments, Inc + * Tero Kristo (t-kristo@ti.com) + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +#include "clock.h" + +#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1 +#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5 +#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8 + +#define OMAP34XX_CM_IDLEST_VAL 1 + +/* + * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported + * in the same register at a bit offset of 0x8. The EN_ACK for ICK is + * at an offset of 4 from ICK enable bit. + */ +#define AM35XX_IPSS_ICK_MASK 0xF +#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4 +#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8 +#define AM35XX_IPSS_CLK_IDLEST_VAL 0 + +#define AM35XX_ST_IPSS_SHIFT 5 + +/** + * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator + * + * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift + * from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk, + struct clk_omap_reg *idlest_reg, + u8 *idlest_bit, + u8 *idlest_val) +{ + memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg)); + idlest_reg->offset &= ~0xf0; + idlest_reg->offset |= 0x20; + *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; + *idlest_val = OMAP34XX_CM_IDLEST_VAL; +} + +const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = { + .allow_idle = omap2_clkt_iclk_allow_idle, + .deny_idle = omap2_clkt_iclk_deny_idle, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +/** + * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator + * + * Some OMAP modules on OMAP3 ES2+ chips have both initiator and + * target IDLEST bits. For our purposes, we are concerned with the + * target IDLEST bits, which exist at a different bit position than + * the *CLKEN bit position for these modules (DSS and USBHOST) (The + * default find_idlest code assumes that they are at the same + * position.) No return value. + */ +static void +omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk, + struct clk_omap_reg *idlest_reg, + u8 *idlest_bit, u8 *idlest_val) +{ + memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg)); + + idlest_reg->offset &= ~0xf0; + idlest_reg->offset |= 0x20; + /* USBHOST_IDLE has same shift */ + *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; + *idlest_val = OMAP34XX_CM_IDLEST_VAL; +} + +const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = { + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = { + .allow_idle = omap2_clkt_iclk_allow_idle, + .deny_idle = omap2_clkt_iclk_deny_idle, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +/** + * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator + * + * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different + * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void +omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk, + struct clk_omap_reg *idlest_reg, + u8 *idlest_bit, + u8 *idlest_val) +{ + memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg)); + idlest_reg->offset &= ~0xf0; + idlest_reg->offset |= 0x20; + *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; + *idlest_val = OMAP34XX_CM_IDLEST_VAL; +} + +const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = { + .allow_idle = omap2_clkt_iclk_allow_idle, + .deny_idle = omap2_clkt_iclk_deny_idle, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +/** + * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator + * + * The interface clocks on AM35xx IPSS reflects the clock idle status + * in the enable register itsel at a bit offset of 4 from the enable + * bit. A value of 1 indicates that clock is enabled. + */ +static void am35xx_clk_find_idlest(struct clk_hw_omap *clk, + struct clk_omap_reg *idlest_reg, + u8 *idlest_bit, + u8 *idlest_val) +{ + memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg)); + *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET; + *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL; +} + +/** + * am35xx_clk_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as HECC) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. + */ +static void am35xx_clk_find_companion(struct clk_hw_omap *clk, + struct clk_omap_reg *other_reg, + u8 *other_bit) +{ + memcpy(other_reg, &clk->enable_reg, sizeof(*other_reg)); + if (clk->enable_bit & AM35XX_IPSS_ICK_MASK) + *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET; + else + *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET; +} + +const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = { + .find_idlest = am35xx_clk_find_idlest, + .find_companion = am35xx_clk_find_companion, +}; + +/** + * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator + * + * The IPSS target CM_IDLEST bit is at a different shift from the + * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg + * and @idlest_bit. No return value. + */ +static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk, + struct clk_omap_reg *idlest_reg, + u8 *idlest_bit, + u8 *idlest_val) +{ + memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg)); + + idlest_reg->offset &= ~0xf0; + idlest_reg->offset |= 0x20; + *idlest_bit = AM35XX_ST_IPSS_SHIFT; + *idlest_val = OMAP34XX_CM_IDLEST_VAL; +} + +const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = { + .allow_idle = omap2_clkt_iclk_allow_idle, + .deny_idle = omap2_clkt_iclk_deny_idle, + .find_idlest = am35xx_clk_ipss_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static struct ti_dt_clk omap3xxx_clks[] = { + DT_CLK(NULL, "timer_32k_ck", "omap_32k_fck"), + DT_CLK(NULL, "timer_sys_ck", "sys_ck"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap36xx_omap3430es2plus_clks[] = { + DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es2"), + DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es2"), + DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es2"), + DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es2"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap3430es1_clks[] = { + DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es1"), + DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es1"), + DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es1"), + DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es1"), + DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es1"), + DT_CLK(NULL, "dss_ick", "dss_ick_3430es1"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk omap36xx_am35xx_omap3430es2plus_clks[] = { + DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es2"), + DT_CLK(NULL, "dss_ick", "dss_ick_3430es2"), + { .node_name = NULL }, +}; + +static struct ti_dt_clk am35xx_clks[] = { + DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_am35xx"), + DT_CLK(NULL, "hsotgusb_fck", "hsotgusb_fck_am35xx"), + DT_CLK(NULL, "uart4_ick", "uart4_ick_am35xx"), + DT_CLK(NULL, "uart4_fck", "uart4_fck_am35xx"), + { .node_name = NULL }, +}; + +static const char *enable_init_clks[] = { + "sdrc_ick", + "gpmc_fck", + "omapctrl_ick", +}; + +enum { + OMAP3_SOC_AM35XX, + OMAP3_SOC_OMAP3430_ES1, + OMAP3_SOC_OMAP3430_ES2_PLUS, + OMAP3_SOC_OMAP3630, +}; + +/** + * omap3_clk_lock_dpll5 - locks DPLL5 + * + * Locks DPLL5 to a pre-defined frequency. This is required for proper + * operation of USB. + */ +void __init omap3_clk_lock_dpll5(void) +{ + struct clk *dpll5_clk; + struct clk *dpll5_m2_clk; + + /* + * Errata sprz319f advisory 2.1 documents a USB host clock drift issue + * that can be worked around using specially crafted dpll5 settings + * with a dpll5_m2 divider set to 8. Set the dpll5 rate to 8x the USB + * host clock rate, its .set_rate handler() will detect that frequency + * and use the errata settings. + */ + dpll5_clk = clk_get(NULL, "dpll5_ck"); + clk_set_rate(dpll5_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST * 8); + clk_prepare_enable(dpll5_clk); + + /* Program dpll5_m2_clk divider */ + dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); + clk_prepare_enable(dpll5_m2_clk); + clk_set_rate(dpll5_m2_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST); + + clk_disable_unprepare(dpll5_m2_clk); + clk_disable_unprepare(dpll5_clk); +} + +static int __init omap3xxx_dt_clk_init(int soc_type) +{ + if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 || + soc_type == OMAP3_SOC_OMAP3430_ES1 || + soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS) + ti_dt_clocks_register(omap3xxx_clks); + + if (soc_type == OMAP3_SOC_AM35XX) + ti_dt_clocks_register(am35xx_clks); + + if (soc_type == OMAP3_SOC_OMAP3630 || soc_type == OMAP3_SOC_AM35XX || + soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS) + ti_dt_clocks_register(omap36xx_am35xx_omap3430es2plus_clks); + + if (soc_type == OMAP3_SOC_OMAP3430_ES1) + ti_dt_clocks_register(omap3430es1_clks); + + if (soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS || + soc_type == OMAP3_SOC_OMAP3630) + ti_dt_clocks_register(omap36xx_omap3430es2plus_clks); + + omap2_clk_disable_autoidle_all(); + + ti_clk_add_aliases(); + + omap2_clk_enable_init_clocks(enable_init_clks, + ARRAY_SIZE(enable_init_clks)); + + pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n", + (clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 100000) % 10, + (clk_get_rate(clk_get_sys(NULL, "core_ck")) / 1000000), + (clk_get_rate(clk_get_sys(NULL, "arm_fck")) / 1000000)); + + if (soc_type != OMAP3_SOC_OMAP3430_ES1) + omap3_clk_lock_dpll5(); + + return 0; +} + +int __init omap3430_dt_clk_init(void) +{ + return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3430_ES2_PLUS); +} + +int __init omap3630_dt_clk_init(void) +{ + return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3630); +} + +int __init am35xx_dt_clk_init(void) +{ + return omap3xxx_dt_clk_init(OMAP3_SOC_AM35XX); +} |