1 files changed, 417 insertions, 0 deletions
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
new file mode 100644
index 000000000..f5f24a95e
--- /dev/null
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *
+ * Shared with ARM platforms, Jamie Iles, Picochip 2011
+ *
+ * Support for the Synopsys DesignWare APB Timers.
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define APBT_MIN_PERIOD			4
+#define APBT_MIN_DELTA_USEC		200
+
+#define APBTMR_N_LOAD_COUNT		0x00
+#define APBTMR_N_CURRENT_VALUE		0x04
+#define APBTMR_N_CONTROL		0x08
+#define APBTMR_N_EOI			0x0c
+#define APBTMR_N_INT_STATUS		0x10
+
+#define APBTMRS_INT_STATUS		0xa0
+#define APBTMRS_EOI			0xa4
+#define APBTMRS_RAW_INT_STATUS		0xa8
+#define APBTMRS_COMP_VERSION		0xac
+
+#define APBTMR_CONTROL_ENABLE		(1 << 0)
+/* 1: periodic, 0:free running. */
+#define APBTMR_CONTROL_MODE_PERIODIC	(1 << 1)
+#define APBTMR_CONTROL_INT		(1 << 2)
+
+static inline struct dw_apb_clock_event_device *
+ced_to_dw_apb_ced(struct clock_event_device *evt)
+{
+	return container_of(evt, struct dw_apb_clock_event_device, ced);
+}
+
+static inline struct dw_apb_clocksource *
+clocksource_to_dw_apb_clocksource(struct clocksource *cs)
+{
+	return container_of(cs, struct dw_apb_clocksource, cs);
+}
+
+static inline u32 apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
+{
+	return readl(timer->base + offs);
+}
+
+static inline void apbt_writel(struct dw_apb_timer *timer, u32 val,
+			unsigned long offs)
+{
+	writel(val, timer->base + offs);
+}
+
+static inline u32 apbt_readl_relaxed(struct dw_apb_timer *timer, unsigned long offs)
+{
+	return readl_relaxed(timer->base + offs);
+}
+
+static inline void apbt_writel_relaxed(struct dw_apb_timer *timer, u32 val,
+			unsigned long offs)
+{
+	writel_relaxed(val, timer->base + offs);
+}
+
+static void apbt_disable_int(struct dw_apb_timer *timer)
+{
+	u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+
+	ctrl |= APBTMR_CONTROL_INT;
+	apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
+}
+
+/**
+ * dw_apb_clockevent_pause() - stop the clock_event_device from running
+ *
+ * @dw_ced:	The APB clock to stop generating events.
+ */
+void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced)
+{
+	disable_irq(dw_ced->timer.irq);
+	apbt_disable_int(&dw_ced->timer);
+}
+
+static void apbt_eoi(struct dw_apb_timer *timer)
+{
+	apbt_readl_relaxed(timer, APBTMR_N_EOI);
+}
+
+static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
+{
+	struct clock_event_device *evt = data;
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+
+	if (!evt->event_handler) {
+		pr_info("Spurious APBT timer interrupt %d\n", irq);
+		return IRQ_NONE;
+	}
+
+	if (dw_ced->eoi)
+		dw_ced->eoi(&dw_ced->timer);
+
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static void apbt_enable_int(struct dw_apb_timer *timer)
+{
+	u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+	/* clear pending intr */
+	apbt_readl(timer, APBTMR_N_EOI);
+	ctrl &= ~APBTMR_CONTROL_INT;
+	apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
+}
+
+static int apbt_shutdown(struct clock_event_device *evt)
+{
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+	u32 ctrl;
+
+	pr_debug("%s CPU %d state=shutdown\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	return 0;
+}
+
+static int apbt_set_oneshot(struct clock_event_device *evt)
+{
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+	u32 ctrl;
+
+	pr_debug("%s CPU %d state=oneshot\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	/*
+	 * set free running mode, this mode will let timer reload max
+	 * timeout which will give time (3min on 25MHz clock) to rearm
+	 * the next event, therefore emulate the one-shot mode.
+	 */
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
+
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	/* write again to set free running mode */
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+
+	/*
+	 * DW APB p. 46, load counter with all 1s before starting free
+	 * running mode.
+	 */
+	apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT);
+	ctrl &= ~APBTMR_CONTROL_INT;
+	ctrl |= APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	return 0;
+}
+
+static int apbt_set_periodic(struct clock_event_device *evt)
+{
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+	unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
+	u32 ctrl;
+
+	pr_debug("%s CPU %d state=periodic\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	/*
+	 * DW APB p. 46, have to disable timer before load counter,
+	 * may cause sync problem.
+	 */
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	udelay(1);
+	pr_debug("Setting clock period %lu for HZ %d\n", period, HZ);
+	apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT);
+	ctrl |= APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	return 0;
+}
+
+static int apbt_resume(struct clock_event_device *evt)
+{
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+
+	pr_debug("%s CPU %d state=resume\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	apbt_enable_int(&dw_ced->timer);
+	return 0;
+}
+
+static int apbt_next_event(unsigned long delta,
+			   struct clock_event_device *evt)
+{
+	u32 ctrl;
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+
+	/* Disable timer */
+	ctrl = apbt_readl_relaxed(&dw_ced->timer, APBTMR_N_CONTROL);
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	/* write new count */
+	apbt_writel_relaxed(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
+	ctrl |= APBTMR_CONTROL_ENABLE;
+	apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+
+	return 0;
+}
+
+/**
+ * dw_apb_clockevent_init() - use an APB timer as a clock_event_device
+ *
+ * @cpu:	The CPU the events will be targeted at or -1 if CPU affiliation
+ *		isn't required.
+ * @name:	The name used for the timer and the IRQ for it.
+ * @rating:	The rating to give the timer.
+ * @base:	I/O base for the timer registers.
+ * @irq:	The interrupt number to use for the timer.
+ * @freq:	The frequency that the timer counts at.
+ *
+ * This creates a clock_event_device for using with the generic clock layer
+ * but does not start and register it.  This should be done with
+ * dw_apb_clockevent_register() as the next step.  If this is the first time
+ * it has been called for a timer then the IRQ will be requested, if not it
+ * just be enabled to allow CPU hotplug to avoid repeatedly requesting and
+ * releasing the IRQ.
+ */
+struct dw_apb_clock_event_device *
+dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
+		       void __iomem *base, int irq, unsigned long freq)
+{
+	struct dw_apb_clock_event_device *dw_ced =
+		kzalloc(sizeof(*dw_ced), GFP_KERNEL);
+	int err;
+
+	if (!dw_ced)
+		return NULL;
+
+	dw_ced->timer.base = base;
+	dw_ced->timer.irq = irq;
+	dw_ced->timer.freq = freq;
+
+	clockevents_calc_mult_shift(&dw_ced->ced, freq, APBT_MIN_PERIOD);
+	dw_ced->ced.max_delta_ns = clockevent_delta2ns(0x7fffffff,
+						       &dw_ced->ced);
+	dw_ced->ced.max_delta_ticks = 0x7fffffff;
+	dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
+	dw_ced->ced.min_delta_ticks = 5000;
+	dw_ced->ced.cpumask = cpu < 0 ? cpu_possible_mask : cpumask_of(cpu);
+	dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
+				CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
+	dw_ced->ced.set_state_shutdown = apbt_shutdown;
+	dw_ced->ced.set_state_periodic = apbt_set_periodic;
+	dw_ced->ced.set_state_oneshot = apbt_set_oneshot;
+	dw_ced->ced.set_state_oneshot_stopped = apbt_shutdown;
+	dw_ced->ced.tick_resume = apbt_resume;
+	dw_ced->ced.set_next_event = apbt_next_event;
+	dw_ced->ced.irq = dw_ced->timer.irq;
+	dw_ced->ced.rating = rating;
+	dw_ced->ced.name = name;
+
+	dw_ced->eoi = apbt_eoi;
+	err = request_irq(irq, dw_apb_clockevent_irq,
+			  IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+			  dw_ced->ced.name, &dw_ced->ced);
+	if (err) {
+		pr_err("failed to request timer irq\n");
+		kfree(dw_ced);
+		dw_ced = NULL;
+	}
+
+	return dw_ced;
+}
+
+/**
+ * dw_apb_clockevent_resume() - resume a clock that has been paused.
+ *
+ * @dw_ced:	The APB clock to resume.
+ */
+void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced)
+{
+	enable_irq(dw_ced->timer.irq);
+}
+
+/**
+ * dw_apb_clockevent_stop() - stop the clock_event_device and release the IRQ.
+ *
+ * @dw_ced:	The APB clock to stop generating the events.
+ */
+void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced)
+{
+	free_irq(dw_ced->timer.irq, &dw_ced->ced);
+}
+
+/**
+ * dw_apb_clockevent_register() - register the clock with the generic layer
+ *
+ * @dw_ced:	The APB clock to register as a clock_event_device.
+ */
+void dw_apb_clockevent_register(struct dw_apb_clock_event_device *dw_ced)
+{
+	apbt_writel(&dw_ced->timer, 0, APBTMR_N_CONTROL);
+	clockevents_register_device(&dw_ced->ced);
+	apbt_enable_int(&dw_ced->timer);
+}
+
+/**
+ * dw_apb_clocksource_start() - start the clocksource counting.
+ *
+ * @dw_cs:	The clocksource to start.
+ *
+ * This is used to start the clocksource before registration and can be used
+ * to enable calibration of timers.
+ */
+void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
+{
+	/*
+	 * start count down from 0xffff_ffff. this is done by toggling the
+	 * enable bit then load initial load count to ~0.
+	 */
+	u32 ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
+
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
+	apbt_writel(&dw_cs->timer, ~0, APBTMR_N_LOAD_COUNT);
+	/* enable, mask interrupt */
+	ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
+	ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);
+	apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
+	/* read it once to get cached counter value initialized */
+	dw_apb_clocksource_read(dw_cs);
+}
+
+static u64 __apbt_read_clocksource(struct clocksource *cs)
+{
+	u32 current_count;
+	struct dw_apb_clocksource *dw_cs =
+		clocksource_to_dw_apb_clocksource(cs);
+
+	current_count = apbt_readl_relaxed(&dw_cs->timer,
+					APBTMR_N_CURRENT_VALUE);
+
+	return (u64)~current_count;
+}
+
+static void apbt_restart_clocksource(struct clocksource *cs)
+{
+	struct dw_apb_clocksource *dw_cs =
+		clocksource_to_dw_apb_clocksource(cs);
+
+	dw_apb_clocksource_start(dw_cs);
+}
+
+/**
+ * dw_apb_clocksource_init() - use an APB timer as a clocksource.
+ *
+ * @rating:	The rating to give the clocksource.
+ * @name:	The name for the clocksource.
+ * @base:	The I/O base for the timer registers.
+ * @freq:	The frequency that the timer counts at.
+ *
+ * This creates a clocksource using an APB timer but does not yet register it
+ * with the clocksource system.  This should be done with
+ * dw_apb_clocksource_register() as the next step.
+ */
+struct dw_apb_clocksource *
+dw_apb_clocksource_init(unsigned rating, const char *name, void __iomem *base,
+			unsigned long freq)
+{
+	struct dw_apb_clocksource *dw_cs = kzalloc(sizeof(*dw_cs), GFP_KERNEL);
+
+	if (!dw_cs)
+		return NULL;
+
+	dw_cs->timer.base = base;
+	dw_cs->timer.freq = freq;
+	dw_cs->cs.name = name;
+	dw_cs->cs.rating = rating;
+	dw_cs->cs.read = __apbt_read_clocksource;
+	dw_cs->cs.mask = CLOCKSOURCE_MASK(32);
+	dw_cs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	dw_cs->cs.resume = apbt_restart_clocksource;
+
+	return dw_cs;
+}
+
+/**
+ * dw_apb_clocksource_register() - register the APB clocksource.
+ *
+ * @dw_cs:	The clocksource to register.
+ */
+void dw_apb_clocksource_register(struct dw_apb_clocksource *dw_cs)
+{
+	clocksource_register_hz(&dw_cs->cs, dw_cs->timer.freq);
+}
+
+/**
+ * dw_apb_clocksource_read() - read the current value of a clocksource.
+ *
+ * @dw_cs:	The clocksource to read.
+ */
+u64 dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs)
+{
+	return (u64)~apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
+}