diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/comedi/comedi_pci.c | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/drivers/comedi/comedi_pci.c b/drivers/comedi/comedi_pci.c new file mode 100644 index 000000000..cc2581902 --- /dev/null +++ b/drivers/comedi/comedi_pci.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * comedi_pci.c + * Comedi PCI driver specific functions. + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org> + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/comedi/comedi_pci.h> + +/** + * comedi_to_pci_dev() - Return PCI device attached to COMEDI device + * @dev: COMEDI device. + * + * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a + * a &struct device embedded in a &struct pci_dev. + * + * Return: Attached PCI device if @dev->hw_dev is non-%NULL. + * Return %NULL if @dev->hw_dev is %NULL. + */ +struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev) +{ + return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL; +} +EXPORT_SYMBOL_GPL(comedi_to_pci_dev); + +/** + * comedi_pci_enable() - Enable the PCI device and request the regions + * @dev: COMEDI device. + * + * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a + * a &struct device embedded in a &struct pci_dev. Enable the PCI device + * and request its regions. Set @dev->ioenabled to %true if successful, + * otherwise undo what was done. + * + * Calls to comedi_pci_enable() and comedi_pci_disable() cannot be nested. + * + * Return: + * 0 on success, + * -%ENODEV if @dev->hw_dev is %NULL, + * -%EBUSY if regions busy, + * or some negative error number if failed to enable PCI device. + * + */ +int comedi_pci_enable(struct comedi_device *dev) +{ + struct pci_dev *pcidev = comedi_to_pci_dev(dev); + int rc; + + if (!pcidev) + return -ENODEV; + + rc = pci_enable_device(pcidev); + if (rc < 0) + return rc; + + rc = pci_request_regions(pcidev, dev->board_name); + if (rc < 0) + pci_disable_device(pcidev); + else + dev->ioenabled = true; + + return rc; +} +EXPORT_SYMBOL_GPL(comedi_pci_enable); + +/** + * comedi_pci_disable() - Release the regions and disable the PCI device + * @dev: COMEDI device. + * + * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a + * a &struct device embedded in a &struct pci_dev. If the earlier call + * to comedi_pci_enable() was successful, release the PCI device's regions + * and disable it. Reset @dev->ioenabled back to %false. + */ +void comedi_pci_disable(struct comedi_device *dev) +{ + struct pci_dev *pcidev = comedi_to_pci_dev(dev); + + if (pcidev && dev->ioenabled) { + pci_release_regions(pcidev); + pci_disable_device(pcidev); + } + dev->ioenabled = false; +} +EXPORT_SYMBOL_GPL(comedi_pci_disable); + +/** + * comedi_pci_detach() - A generic "detach" handler for PCI COMEDI drivers + * @dev: COMEDI device. + * + * COMEDI drivers for PCI devices that need no special clean-up of private data + * and have no ioremapped regions other than that pointed to by @dev->mmio may + * use this function as its "detach" handler called by the COMEDI core when a + * COMEDI device is being detached from the low-level driver. It may be also + * called from a more specific "detach" handler that does additional clean-up. + * + * Free the IRQ if @dev->irq is non-zero, iounmap @dev->mmio if it is + * non-%NULL, and call comedi_pci_disable() to release the PCI device's regions + * and disable it. + */ +void comedi_pci_detach(struct comedi_device *dev) +{ + struct pci_dev *pcidev = comedi_to_pci_dev(dev); + + if (!pcidev || !dev->ioenabled) + return; + + if (dev->irq) { + free_irq(dev->irq, dev); + dev->irq = 0; + } + if (dev->mmio) { + iounmap(dev->mmio); + dev->mmio = NULL; + } + comedi_pci_disable(dev); +} +EXPORT_SYMBOL_GPL(comedi_pci_detach); + +/** + * comedi_pci_auto_config() - Configure/probe a PCI COMEDI device + * @pcidev: PCI device. + * @driver: Registered COMEDI driver. + * @context: Driver specific data, passed to comedi_auto_config(). + * + * Typically called from the pci_driver (*probe) function. Auto-configure + * a COMEDI device, using the &struct device embedded in *@pcidev as the + * hardware device. The @context value gets passed through to @driver's + * "auto_attach" handler. The "auto_attach" handler may call + * comedi_to_pci_dev() on the passed in COMEDI device to recover @pcidev. + * + * Return: The result of calling comedi_auto_config() (0 on success, or + * a negative error number on failure). + */ +int comedi_pci_auto_config(struct pci_dev *pcidev, + struct comedi_driver *driver, + unsigned long context) +{ + return comedi_auto_config(&pcidev->dev, driver, context); +} +EXPORT_SYMBOL_GPL(comedi_pci_auto_config); + +/** + * comedi_pci_auto_unconfig() - Unconfigure/remove a PCI COMEDI device + * @pcidev: PCI device. + * + * Typically called from the pci_driver (*remove) function. Auto-unconfigure + * a COMEDI device attached to this PCI device, using a pointer to the + * &struct device embedded in *@pcidev as the hardware device. The COMEDI + * driver's "detach" handler will be called during unconfiguration of the + * COMEDI device. + * + * Note that the COMEDI device may have already been unconfigured using the + * %COMEDI_DEVCONFIG ioctl, in which case this attempt to unconfigure it + * again should be ignored. + */ +void comedi_pci_auto_unconfig(struct pci_dev *pcidev) +{ + comedi_auto_unconfig(&pcidev->dev); +} +EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig); + +/** + * comedi_pci_driver_register() - Register a PCI COMEDI driver + * @comedi_driver: COMEDI driver to be registered. + * @pci_driver: PCI driver to be registered. + * + * This function is called from the module_init() of PCI COMEDI driver modules + * to register the COMEDI driver and the PCI driver. Do not call it directly, + * use the module_comedi_pci_driver() helper macro instead. + * + * Return: 0 on success, or a negative error number on failure. + */ +int comedi_pci_driver_register(struct comedi_driver *comedi_driver, + struct pci_driver *pci_driver) +{ + int ret; + + ret = comedi_driver_register(comedi_driver); + if (ret < 0) + return ret; + + ret = pci_register_driver(pci_driver); + if (ret < 0) { + comedi_driver_unregister(comedi_driver); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(comedi_pci_driver_register); + +/** + * comedi_pci_driver_unregister() - Unregister a PCI COMEDI driver + * @comedi_driver: COMEDI driver to be unregistered. + * @pci_driver: PCI driver to be unregistered. + * + * This function is called from the module_exit() of PCI COMEDI driver modules + * to unregister the PCI driver and the COMEDI driver. Do not call it + * directly, use the module_comedi_pci_driver() helper macro instead. + */ +void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver, + struct pci_driver *pci_driver) +{ + pci_unregister_driver(pci_driver); + comedi_driver_unregister(comedi_driver); +} +EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister); + +static int __init comedi_pci_init(void) +{ + return 0; +} +module_init(comedi_pci_init); + +static void __exit comedi_pci_exit(void) +{ +} +module_exit(comedi_pci_exit); + +MODULE_AUTHOR("https://www.comedi.org"); +MODULE_DESCRIPTION("Comedi PCI interface module"); +MODULE_LICENSE("GPL"); |