summaryrefslogtreecommitdiffstats
path: root/drivers/counter/stm32-lptimer-cnt.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/counter/stm32-lptimer-cnt.c')
-rw-r--r--drivers/counter/stm32-lptimer-cnt.c523
1 files changed, 523 insertions, 0 deletions
diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
new file mode 100644
index 000000000..843975555
--- /dev/null
+++ b/drivers/counter/stm32-lptimer-cnt.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STM32 Low-Power Timer Encoder and Counter driver
+ *
+ * Copyright (C) STMicroelectronics 2017
+ *
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>
+ *
+ * Inspired by 104-quad-8 and stm32-timer-trigger drivers.
+ *
+ */
+
+#include <linux/bitfield.h>
+#include <linux/counter.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+struct stm32_lptim_cnt {
+ struct device *dev;
+ struct regmap *regmap;
+ struct clk *clk;
+ u32 ceiling;
+ u32 polarity;
+ u32 quadrature_mode;
+ bool enabled;
+};
+
+static int stm32_lptim_is_enabled(struct stm32_lptim_cnt *priv)
+{
+ u32 val;
+ int ret;
+
+ ret = regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
+ if (ret)
+ return ret;
+
+ return FIELD_GET(STM32_LPTIM_ENABLE, val);
+}
+
+static int stm32_lptim_set_enable_state(struct stm32_lptim_cnt *priv,
+ int enable)
+{
+ int ret;
+ u32 val;
+
+ val = FIELD_PREP(STM32_LPTIM_ENABLE, enable);
+ ret = regmap_write(priv->regmap, STM32_LPTIM_CR, val);
+ if (ret)
+ return ret;
+
+ if (!enable) {
+ clk_disable(priv->clk);
+ priv->enabled = false;
+ return 0;
+ }
+
+ /* LP timer must be enabled before writing CMP & ARR */
+ ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, priv->ceiling);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, 0);
+ if (ret)
+ return ret;
+
+ /* ensure CMP & ARR registers are properly written */
+ ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
+ (val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
+ 100, 1000);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
+ STM32_LPTIM_CMPOKCF_ARROKCF);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(priv->clk);
+ if (ret) {
+ regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+ return ret;
+ }
+ priv->enabled = true;
+
+ /* Start LP timer in continuous mode */
+ return regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
+ STM32_LPTIM_CNTSTRT, STM32_LPTIM_CNTSTRT);
+}
+
+static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
+{
+ u32 mask = STM32_LPTIM_ENC | STM32_LPTIM_COUNTMODE |
+ STM32_LPTIM_CKPOL | STM32_LPTIM_PRESC;
+ u32 val;
+
+ /* Setup LP timer encoder/counter and polarity, without prescaler */
+ if (priv->quadrature_mode)
+ val = enable ? STM32_LPTIM_ENC : 0;
+ else
+ val = enable ? STM32_LPTIM_COUNTMODE : 0;
+ val |= FIELD_PREP(STM32_LPTIM_CKPOL, enable ? priv->polarity : 0);
+
+ return regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask, val);
+}
+
+/*
+ * In non-quadrature mode, device counts up on active edge.
+ * In quadrature mode, encoder counting scenarios are as follows:
+ * +---------+----------+--------------------+--------------------+
+ * | Active | Level on | IN1 signal | IN2 signal |
+ * | edge | opposite +----------+---------+----------+---------+
+ * | | signal | Rising | Falling | Rising | Falling |
+ * +---------+----------+----------+---------+----------+---------+
+ * | Rising | High -> | Down | - | Up | - |
+ * | edge | Low -> | Up | - | Down | - |
+ * +---------+----------+----------+---------+----------+---------+
+ * | Falling | High -> | - | Up | - | Down |
+ * | edge | Low -> | - | Down | - | Up |
+ * +---------+----------+----------+---------+----------+---------+
+ * | Both | High -> | Down | Up | Up | Down |
+ * | edges | Low -> | Up | Down | Down | Up |
+ * +---------+----------+----------+---------+----------+---------+
+ */
+static const enum counter_function stm32_lptim_cnt_functions[] = {
+ COUNTER_FUNCTION_INCREASE,
+ COUNTER_FUNCTION_QUADRATURE_X4,
+};
+
+static const enum counter_synapse_action stm32_lptim_cnt_synapse_actions[] = {
+ COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+ COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
+ COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+ COUNTER_SYNAPSE_ACTION_NONE,
+};
+
+static int stm32_lptim_cnt_read(struct counter_device *counter,
+ struct counter_count *count, u64 *val)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+ u32 cnt;
+ int ret;
+
+ ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &cnt);
+ if (ret)
+ return ret;
+
+ *val = cnt;
+
+ return 0;
+}
+
+static int stm32_lptim_cnt_function_read(struct counter_device *counter,
+ struct counter_count *count,
+ enum counter_function *function)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+
+ if (!priv->quadrature_mode) {
+ *function = COUNTER_FUNCTION_INCREASE;
+ return 0;
+ }
+
+ if (priv->polarity == STM32_LPTIM_CKPOL_BOTH_EDGES) {
+ *function = COUNTER_FUNCTION_QUADRATURE_X4;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int stm32_lptim_cnt_function_write(struct counter_device *counter,
+ struct counter_count *count,
+ enum counter_function function)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+
+ if (stm32_lptim_is_enabled(priv))
+ return -EBUSY;
+
+ switch (function) {
+ case COUNTER_FUNCTION_INCREASE:
+ priv->quadrature_mode = 0;
+ return 0;
+ case COUNTER_FUNCTION_QUADRATURE_X4:
+ priv->quadrature_mode = 1;
+ priv->polarity = STM32_LPTIM_CKPOL_BOTH_EDGES;
+ return 0;
+ default:
+ /* should never reach this path */
+ return -EINVAL;
+ }
+}
+
+static int stm32_lptim_cnt_enable_read(struct counter_device *counter,
+ struct counter_count *count,
+ u8 *enable)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+ int ret;
+
+ ret = stm32_lptim_is_enabled(priv);
+ if (ret < 0)
+ return ret;
+
+ *enable = ret;
+
+ return 0;
+}
+
+static int stm32_lptim_cnt_enable_write(struct counter_device *counter,
+ struct counter_count *count,
+ u8 enable)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+ int ret;
+
+ /* Check nobody uses the timer, or already disabled/enabled */
+ ret = stm32_lptim_is_enabled(priv);
+ if ((ret < 0) || (!ret && !enable))
+ return ret;
+ if (enable && ret)
+ return -EBUSY;
+
+ ret = stm32_lptim_setup(priv, enable);
+ if (ret)
+ return ret;
+
+ ret = stm32_lptim_set_enable_state(priv, enable);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int stm32_lptim_cnt_ceiling_read(struct counter_device *counter,
+ struct counter_count *count,
+ u64 *ceiling)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+
+ *ceiling = priv->ceiling;
+
+ return 0;
+}
+
+static int stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
+ struct counter_count *count,
+ u64 ceiling)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+
+ if (stm32_lptim_is_enabled(priv))
+ return -EBUSY;
+
+ if (ceiling > STM32_LPTIM_MAX_ARR)
+ return -ERANGE;
+
+ priv->ceiling = ceiling;
+
+ return 0;
+}
+
+static struct counter_comp stm32_lptim_cnt_ext[] = {
+ COUNTER_COMP_ENABLE(stm32_lptim_cnt_enable_read,
+ stm32_lptim_cnt_enable_write),
+ COUNTER_COMP_CEILING(stm32_lptim_cnt_ceiling_read,
+ stm32_lptim_cnt_ceiling_write),
+};
+
+static int stm32_lptim_cnt_action_read(struct counter_device *counter,
+ struct counter_count *count,
+ struct counter_synapse *synapse,
+ enum counter_synapse_action *action)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+ enum counter_function function;
+ int err;
+
+ err = stm32_lptim_cnt_function_read(counter, count, &function);
+ if (err)
+ return err;
+
+ switch (function) {
+ case COUNTER_FUNCTION_INCREASE:
+ /* LP Timer acts as up-counter on input 1 */
+ if (synapse->signal->id != count->synapses[0].signal->id) {
+ *action = COUNTER_SYNAPSE_ACTION_NONE;
+ return 0;
+ }
+
+ switch (priv->polarity) {
+ case STM32_LPTIM_CKPOL_RISING_EDGE:
+ *action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
+ return 0;
+ case STM32_LPTIM_CKPOL_FALLING_EDGE:
+ *action = COUNTER_SYNAPSE_ACTION_FALLING_EDGE;
+ return 0;
+ case STM32_LPTIM_CKPOL_BOTH_EDGES:
+ *action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
+ return 0;
+ default:
+ /* should never reach this path */
+ return -EINVAL;
+ }
+ case COUNTER_FUNCTION_QUADRATURE_X4:
+ *action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
+ return 0;
+ default:
+ /* should never reach this path */
+ return -EINVAL;
+ }
+}
+
+static int stm32_lptim_cnt_action_write(struct counter_device *counter,
+ struct counter_count *count,
+ struct counter_synapse *synapse,
+ enum counter_synapse_action action)
+{
+ struct stm32_lptim_cnt *const priv = counter_priv(counter);
+ enum counter_function function;
+ int err;
+
+ if (stm32_lptim_is_enabled(priv))
+ return -EBUSY;
+
+ err = stm32_lptim_cnt_function_read(counter, count, &function);
+ if (err)
+ return err;
+
+ /* only set polarity when in counter mode (on input 1) */
+ if (function != COUNTER_FUNCTION_INCREASE
+ || synapse->signal->id != count->synapses[0].signal->id)
+ return -EINVAL;
+
+ switch (action) {
+ case COUNTER_SYNAPSE_ACTION_RISING_EDGE:
+ priv->polarity = STM32_LPTIM_CKPOL_RISING_EDGE;
+ return 0;
+ case COUNTER_SYNAPSE_ACTION_FALLING_EDGE:
+ priv->polarity = STM32_LPTIM_CKPOL_FALLING_EDGE;
+ return 0;
+ case COUNTER_SYNAPSE_ACTION_BOTH_EDGES:
+ priv->polarity = STM32_LPTIM_CKPOL_BOTH_EDGES;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct counter_ops stm32_lptim_cnt_ops = {
+ .count_read = stm32_lptim_cnt_read,
+ .function_read = stm32_lptim_cnt_function_read,
+ .function_write = stm32_lptim_cnt_function_write,
+ .action_read = stm32_lptim_cnt_action_read,
+ .action_write = stm32_lptim_cnt_action_write,
+};
+
+static struct counter_signal stm32_lptim_cnt_signals[] = {
+ {
+ .id = 0,
+ .name = "Channel 1 Quadrature A"
+ },
+ {
+ .id = 1,
+ .name = "Channel 1 Quadrature B"
+ }
+};
+
+static struct counter_synapse stm32_lptim_cnt_synapses[] = {
+ {
+ .actions_list = stm32_lptim_cnt_synapse_actions,
+ .num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
+ .signal = &stm32_lptim_cnt_signals[0]
+ },
+ {
+ .actions_list = stm32_lptim_cnt_synapse_actions,
+ .num_actions = ARRAY_SIZE(stm32_lptim_cnt_synapse_actions),
+ .signal = &stm32_lptim_cnt_signals[1]
+ }
+};
+
+/* LP timer with encoder */
+static struct counter_count stm32_lptim_enc_counts = {
+ .id = 0,
+ .name = "LPTimer Count",
+ .functions_list = stm32_lptim_cnt_functions,
+ .num_functions = ARRAY_SIZE(stm32_lptim_cnt_functions),
+ .synapses = stm32_lptim_cnt_synapses,
+ .num_synapses = ARRAY_SIZE(stm32_lptim_cnt_synapses),
+ .ext = stm32_lptim_cnt_ext,
+ .num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
+};
+
+/* LP timer without encoder (counter only) */
+static struct counter_count stm32_lptim_in1_counts = {
+ .id = 0,
+ .name = "LPTimer Count",
+ .functions_list = stm32_lptim_cnt_functions,
+ .num_functions = 1,
+ .synapses = stm32_lptim_cnt_synapses,
+ .num_synapses = 1,
+ .ext = stm32_lptim_cnt_ext,
+ .num_ext = ARRAY_SIZE(stm32_lptim_cnt_ext)
+};
+
+static int stm32_lptim_cnt_probe(struct platform_device *pdev)
+{
+ struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+ struct counter_device *counter;
+ struct stm32_lptim_cnt *priv;
+ int ret;
+
+ if (IS_ERR_OR_NULL(ddata))
+ return -EINVAL;
+
+ counter = devm_counter_alloc(&pdev->dev, sizeof(*priv));
+ if (!counter)
+ return -ENOMEM;
+ priv = counter_priv(counter);
+
+ priv->dev = &pdev->dev;
+ priv->regmap = ddata->regmap;
+ priv->clk = ddata->clk;
+ priv->ceiling = STM32_LPTIM_MAX_ARR;
+
+ /* Initialize Counter device */
+ counter->name = dev_name(&pdev->dev);
+ counter->parent = &pdev->dev;
+ counter->ops = &stm32_lptim_cnt_ops;
+ if (ddata->has_encoder) {
+ counter->counts = &stm32_lptim_enc_counts;
+ counter->num_signals = ARRAY_SIZE(stm32_lptim_cnt_signals);
+ } else {
+ counter->counts = &stm32_lptim_in1_counts;
+ counter->num_signals = 1;
+ }
+ counter->num_counts = 1;
+ counter->signals = stm32_lptim_cnt_signals;
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = devm_counter_add(&pdev->dev, counter);
+ if (ret < 0)
+ return dev_err_probe(&pdev->dev, ret, "Failed to add counter\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stm32_lptim_cnt_suspend(struct device *dev)
+{
+ struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
+ int ret;
+
+ /* Only take care of enabled counter: don't disturb other MFD child */
+ if (priv->enabled) {
+ ret = stm32_lptim_setup(priv, 0);
+ if (ret)
+ return ret;
+
+ ret = stm32_lptim_set_enable_state(priv, 0);
+ if (ret)
+ return ret;
+
+ /* Force enable state for later resume */
+ priv->enabled = true;
+ }
+
+ return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int stm32_lptim_cnt_resume(struct device *dev)
+{
+ struct stm32_lptim_cnt *priv = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pinctrl_pm_select_default_state(dev);
+ if (ret)
+ return ret;
+
+ if (priv->enabled) {
+ priv->enabled = false;
+ ret = stm32_lptim_setup(priv, 1);
+ if (ret)
+ return ret;
+
+ ret = stm32_lptim_set_enable_state(priv, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stm32_lptim_cnt_pm_ops, stm32_lptim_cnt_suspend,
+ stm32_lptim_cnt_resume);
+
+static const struct of_device_id stm32_lptim_cnt_of_match[] = {
+ { .compatible = "st,stm32-lptimer-counter", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32_lptim_cnt_of_match);
+
+static struct platform_driver stm32_lptim_cnt_driver = {
+ .probe = stm32_lptim_cnt_probe,
+ .driver = {
+ .name = "stm32-lptimer-counter",
+ .of_match_table = stm32_lptim_cnt_of_match,
+ .pm = &stm32_lptim_cnt_pm_ops,
+ },
+};
+module_platform_driver(stm32_lptim_cnt_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_ALIAS("platform:stm32-lptimer-counter");
+MODULE_DESCRIPTION("STMicroelectronics STM32 LPTIM counter driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(COUNTER);