diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/crypto/amlogic/amlogic-gxl.h | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/drivers/crypto/amlogic/amlogic-gxl.h b/drivers/crypto/amlogic/amlogic-gxl.h new file mode 100644 index 000000000..8c0746a1d --- /dev/null +++ b/drivers/crypto/amlogic/amlogic-gxl.h @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * amlogic.h - hardware cryptographic offloader for Amlogic SoC + * + * Copyright (C) 2018-2019 Corentin LABBE <clabbe@baylibre.com> + */ +#include <crypto/aes.h> +#include <crypto/engine.h> +#include <crypto/skcipher.h> +#include <linux/debugfs.h> +#include <linux/crypto.h> +#include <linux/scatterlist.h> + +#define MODE_KEY 1 +#define MODE_AES_128 0x8 +#define MODE_AES_192 0x9 +#define MODE_AES_256 0xa + +#define MESON_DECRYPT 0 +#define MESON_ENCRYPT 1 + +#define MESON_OPMODE_ECB 0 +#define MESON_OPMODE_CBC 1 + +#define MAXFLOW 2 + +#define MAXDESC 64 + +#define DESC_LAST BIT(18) +#define DESC_ENCRYPTION BIT(28) +#define DESC_OWN BIT(31) + +/* + * struct meson_desc - Descriptor for DMA operations + * Note that without datasheet, some are unknown + * @t_status: Descriptor of the cipher operation (see description below) + * @t_src: Physical address of data to read + * @t_dst: Physical address of data to write + * t_status is segmented like this: + * @len: 0-16 length of data to operate + * @irq: 17 Ignored by hardware + * @eoc: 18 End means the descriptor is the last + * @loop: 19 Unknown + * @mode: 20-23 Type of algorithm (AES, SHA) + * @begin: 24 Unknown + * @end: 25 Unknown + * @op_mode: 26-27 Blockmode (CBC, ECB) + * @enc: 28 0 means decryption, 1 is for encryption + * @block: 29 Unknown + * @error: 30 Unknown + * @owner: 31 owner of the descriptor, 1 own by HW + */ +struct meson_desc { + __le32 t_status; + __le32 t_src; + __le32 t_dst; +}; + +/* + * struct meson_flow - Information used by each flow + * @engine: ptr to the crypto_engine for this flow + * @keylen: keylen for this flow operation + * @complete: completion for the current task on this flow + * @status: set to 1 by interrupt if task is done + * @t_phy: Physical address of task + * @tl: pointer to the current ce_task for this flow + * @stat_req: number of request done by this flow + */ +struct meson_flow { + struct crypto_engine *engine; + struct completion complete; + int status; + unsigned int keylen; + dma_addr_t t_phy; + struct meson_desc *tl; +#ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG + unsigned long stat_req; +#endif +}; + +/* + * struct meson_dev - main container for all this driver information + * @base: base address of amlogic-crypto + * @busclk: bus clock for amlogic-crypto + * @dev: the platform device + * @chanlist: array of all flow + * @flow: flow to use in next request + * @irqs: IRQ numbers for amlogic-crypto + * @dbgfs_dir: Debugfs dentry for statistic directory + * @dbgfs_stats: Debugfs dentry for statistic counters + */ +struct meson_dev { + void __iomem *base; + struct clk *busclk; + struct device *dev; + struct meson_flow *chanlist; + atomic_t flow; + int irqs[MAXFLOW]; +#ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG + struct dentry *dbgfs_dir; +#endif +}; + +/* + * struct meson_cipher_req_ctx - context for a skcipher request + * @op_dir: direction (encrypt vs decrypt) for this request + * @flow: the flow to use for this request + */ +struct meson_cipher_req_ctx { + u32 op_dir; + int flow; + struct skcipher_request fallback_req; // keep at the end +}; + +/* + * struct meson_cipher_tfm_ctx - context for a skcipher TFM + * @enginectx: crypto_engine used by this TFM + * @key: pointer to key data + * @keylen: len of the key + * @keymode: The keymode(type and size of key) associated with this TFM + * @mc: pointer to the private data of driver handling this TFM + * @fallback_tfm: pointer to the fallback TFM + */ +struct meson_cipher_tfm_ctx { + struct crypto_engine_ctx enginectx; + u32 *key; + u32 keylen; + u32 keymode; + struct meson_dev *mc; + struct crypto_skcipher *fallback_tfm; +}; + +/* + * struct meson_alg_template - crypto_alg template + * @type: the CRYPTO_ALG_TYPE for this template + * @blockmode: the type of block operation + * @mc: pointer to the meson_dev structure associated with this template + * @alg: one of sub struct must be used + * @stat_req: number of request done on this template + * @stat_fb: total of all data len done on this template + */ +struct meson_alg_template { + u32 type; + u32 blockmode; + union { + struct skcipher_alg skcipher; + } alg; + struct meson_dev *mc; +#ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG + unsigned long stat_req; + unsigned long stat_fb; +#endif +}; + +int meson_enqueue(struct crypto_async_request *areq, u32 type); + +int meson_aes_setkey(struct crypto_skcipher *tfm, const u8 *key, + unsigned int keylen); +int meson_cipher_init(struct crypto_tfm *tfm); +void meson_cipher_exit(struct crypto_tfm *tfm); +int meson_skdecrypt(struct skcipher_request *areq); +int meson_skencrypt(struct skcipher_request *areq); |