diff options
Diffstat (limited to 'drivers/crypto/cavium/nitrox/nitrox_hal.c')
| -rw-r--r-- | drivers/crypto/cavium/nitrox/nitrox_hal.c | 679 |
1 files changed, 679 insertions, 0 deletions
diff --git a/drivers/crypto/cavium/nitrox/nitrox_hal.c b/drivers/crypto/cavium/nitrox/nitrox_hal.c new file mode 100644 index 000000000..13b137410 --- /dev/null +++ b/drivers/crypto/cavium/nitrox/nitrox_hal.c @@ -0,0 +1,679 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/delay.h> + +#include "nitrox_dev.h" +#include "nitrox_csr.h" +#include "nitrox_hal.h" + +#define PLL_REF_CLK 50 +#define MAX_CSR_RETRIES 10 + +/** + * emu_enable_cores - Enable EMU cluster cores. + * @ndev: NITROX device + */ +static void emu_enable_cores(struct nitrox_device *ndev) +{ + union emu_se_enable emu_se; + union emu_ae_enable emu_ae; + int i; + + /* AE cores 20 per cluster */ + emu_ae.value = 0; + emu_ae.s.enable = 0xfffff; + + /* SE cores 16 per cluster */ + emu_se.value = 0; + emu_se.s.enable = 0xffff; + + /* enable per cluster cores */ + for (i = 0; i < NR_CLUSTERS; i++) { + nitrox_write_csr(ndev, EMU_AE_ENABLEX(i), emu_ae.value); + nitrox_write_csr(ndev, EMU_SE_ENABLEX(i), emu_se.value); + } +} + +/** + * nitrox_config_emu_unit - configure EMU unit. + * @ndev: NITROX device + */ +void nitrox_config_emu_unit(struct nitrox_device *ndev) +{ + union emu_wd_int_ena_w1s emu_wd_int; + union emu_ge_int_ena_w1s emu_ge_int; + u64 offset; + int i; + + /* enable cores */ + emu_enable_cores(ndev); + + /* enable general error and watch dog interrupts */ + emu_ge_int.value = 0; + emu_ge_int.s.se_ge = 0xffff; + emu_ge_int.s.ae_ge = 0xfffff; + emu_wd_int.value = 0; + emu_wd_int.s.se_wd = 1; + + for (i = 0; i < NR_CLUSTERS; i++) { + offset = EMU_WD_INT_ENA_W1SX(i); + nitrox_write_csr(ndev, offset, emu_wd_int.value); + offset = EMU_GE_INT_ENA_W1SX(i); + nitrox_write_csr(ndev, offset, emu_ge_int.value); + } +} + +static void reset_pkt_input_ring(struct nitrox_device *ndev, int ring) +{ + union nps_pkt_in_instr_ctl pkt_in_ctl; + union nps_pkt_in_done_cnts pkt_in_cnts; + int max_retries = MAX_CSR_RETRIES; + u64 offset; + + /* step 1: disable the ring, clear enable bit */ + offset = NPS_PKT_IN_INSTR_CTLX(ring); + pkt_in_ctl.value = nitrox_read_csr(ndev, offset); + pkt_in_ctl.s.enb = 0; + nitrox_write_csr(ndev, offset, pkt_in_ctl.value); + + /* step 2: wait to clear [ENB] */ + usleep_range(100, 150); + do { + pkt_in_ctl.value = nitrox_read_csr(ndev, offset); + if (!pkt_in_ctl.s.enb) + break; + udelay(50); + } while (max_retries--); + + /* step 3: clear done counts */ + offset = NPS_PKT_IN_DONE_CNTSX(ring); + pkt_in_cnts.value = nitrox_read_csr(ndev, offset); + nitrox_write_csr(ndev, offset, pkt_in_cnts.value); + usleep_range(50, 100); +} + +void enable_pkt_input_ring(struct nitrox_device *ndev, int ring) +{ + union nps_pkt_in_instr_ctl pkt_in_ctl; + int max_retries = MAX_CSR_RETRIES; + u64 offset; + + /* 64-byte instruction size */ + offset = NPS_PKT_IN_INSTR_CTLX(ring); + pkt_in_ctl.value = nitrox_read_csr(ndev, offset); + pkt_in_ctl.s.is64b = 1; + pkt_in_ctl.s.enb = 1; + nitrox_write_csr(ndev, offset, pkt_in_ctl.value); + + /* wait for set [ENB] */ + do { + pkt_in_ctl.value = nitrox_read_csr(ndev, offset); + if (pkt_in_ctl.s.enb) + break; + udelay(50); + } while (max_retries--); +} + +/** + * nitrox_config_pkt_input_rings - configure Packet Input Rings + * @ndev: NITROX device + */ +void nitrox_config_pkt_input_rings(struct nitrox_device *ndev) +{ + int i; + + for (i = 0; i < ndev->nr_queues; i++) { + struct nitrox_cmdq *cmdq = &ndev->pkt_inq[i]; + union nps_pkt_in_instr_rsize pkt_in_rsize; + union nps_pkt_in_instr_baoff_dbell pkt_in_dbell; + u64 offset; + + reset_pkt_input_ring(ndev, i); + + /** + * step 4: + * configure ring base address 16-byte aligned, + * size and interrupt threshold. + */ + offset = NPS_PKT_IN_INSTR_BADDRX(i); + nitrox_write_csr(ndev, offset, cmdq->dma); + + /* configure ring size */ + offset = NPS_PKT_IN_INSTR_RSIZEX(i); + pkt_in_rsize.value = 0; + pkt_in_rsize.s.rsize = ndev->qlen; + nitrox_write_csr(ndev, offset, pkt_in_rsize.value); + + /* set high threshold for pkt input ring interrupts */ + offset = NPS_PKT_IN_INT_LEVELSX(i); + nitrox_write_csr(ndev, offset, 0xffffffff); + + /* step 5: clear off door bell counts */ + offset = NPS_PKT_IN_INSTR_BAOFF_DBELLX(i); + pkt_in_dbell.value = 0; + pkt_in_dbell.s.dbell = 0xffffffff; + nitrox_write_csr(ndev, offset, pkt_in_dbell.value); + + /* enable the ring */ + enable_pkt_input_ring(ndev, i); + } +} + +static void reset_pkt_solicit_port(struct nitrox_device *ndev, int port) +{ + union nps_pkt_slc_ctl pkt_slc_ctl; + union nps_pkt_slc_cnts pkt_slc_cnts; + int max_retries = MAX_CSR_RETRIES; + u64 offset; + + /* step 1: disable slc port */ + offset = NPS_PKT_SLC_CTLX(port); + pkt_slc_ctl.value = nitrox_read_csr(ndev, offset); + pkt_slc_ctl.s.enb = 0; + nitrox_write_csr(ndev, offset, pkt_slc_ctl.value); + + /* step 2 */ + usleep_range(100, 150); + /* wait to clear [ENB] */ + do { + pkt_slc_ctl.value = nitrox_read_csr(ndev, offset); + if (!pkt_slc_ctl.s.enb) + break; + udelay(50); + } while (max_retries--); + + /* step 3: clear slc counters */ + offset = NPS_PKT_SLC_CNTSX(port); + pkt_slc_cnts.value = nitrox_read_csr(ndev, offset); + nitrox_write_csr(ndev, offset, pkt_slc_cnts.value); + usleep_range(50, 100); +} + +void enable_pkt_solicit_port(struct nitrox_device *ndev, int port) +{ + union nps_pkt_slc_ctl pkt_slc_ctl; + int max_retries = MAX_CSR_RETRIES; + u64 offset; + + offset = NPS_PKT_SLC_CTLX(port); + pkt_slc_ctl.value = 0; + pkt_slc_ctl.s.enb = 1; + /* + * 8 trailing 0x00 bytes will be added + * to the end of the outgoing packet. + */ + pkt_slc_ctl.s.z = 1; + /* enable response header */ + pkt_slc_ctl.s.rh = 1; + nitrox_write_csr(ndev, offset, pkt_slc_ctl.value); + + /* wait to set [ENB] */ + do { + pkt_slc_ctl.value = nitrox_read_csr(ndev, offset); + if (pkt_slc_ctl.s.enb) + break; + udelay(50); + } while (max_retries--); +} + +static void config_pkt_solicit_port(struct nitrox_device *ndev, int port) +{ + union nps_pkt_slc_int_levels pkt_slc_int; + u64 offset; + + reset_pkt_solicit_port(ndev, port); + + /* step 4: configure interrupt levels */ + offset = NPS_PKT_SLC_INT_LEVELSX(port); + pkt_slc_int.value = 0; + /* time interrupt threshold */ + pkt_slc_int.s.timet = 0x3fffff; + nitrox_write_csr(ndev, offset, pkt_slc_int.value); + + /* enable the solicit port */ + enable_pkt_solicit_port(ndev, port); +} + +void nitrox_config_pkt_solicit_ports(struct nitrox_device *ndev) +{ + int i; + + for (i = 0; i < ndev->nr_queues; i++) + config_pkt_solicit_port(ndev, i); +} + +/** + * enable_nps_core_interrupts - enable NPS core interrutps + * @ndev: NITROX device. + * + * This includes NPS core interrupts. + */ +static void enable_nps_core_interrupts(struct nitrox_device *ndev) +{ + union nps_core_int_ena_w1s core_int; + + /* NPS core interrutps */ + core_int.value = 0; + core_int.s.host_wr_err = 1; + core_int.s.host_wr_timeout = 1; + core_int.s.exec_wr_timeout = 1; + core_int.s.npco_dma_malform = 1; + core_int.s.host_nps_wr_err = 1; + nitrox_write_csr(ndev, NPS_CORE_INT_ENA_W1S, core_int.value); +} + +void nitrox_config_nps_core_unit(struct nitrox_device *ndev) +{ + union nps_core_gbl_vfcfg core_gbl_vfcfg; + + /* endian control information */ + nitrox_write_csr(ndev, NPS_CORE_CONTROL, 1ULL); + + /* disable ILK interface */ + core_gbl_vfcfg.value = 0; + core_gbl_vfcfg.s.ilk_disable = 1; + core_gbl_vfcfg.s.cfg = __NDEV_MODE_PF; + nitrox_write_csr(ndev, NPS_CORE_GBL_VFCFG, core_gbl_vfcfg.value); + + /* enable nps core interrupts */ + enable_nps_core_interrupts(ndev); +} + +/** + * enable_nps_pkt_interrupts - enable NPS packet interrutps + * @ndev: NITROX device. + * + * This includes NPS packet in and slc interrupts. + */ +static void enable_nps_pkt_interrupts(struct nitrox_device *ndev) +{ + /* NPS packet in ring interrupts */ + nitrox_write_csr(ndev, NPS_PKT_IN_RERR_LO_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, NPS_PKT_IN_RERR_HI_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, NPS_PKT_IN_ERR_TYPE_ENA_W1S, (~0ULL)); + /* NPS packet slc port interrupts */ + nitrox_write_csr(ndev, NPS_PKT_SLC_RERR_HI_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, NPS_PKT_SLC_RERR_LO_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, NPS_PKT_SLC_ERR_TYPE_ENA_W1S, (~0uLL)); +} + +void nitrox_config_nps_pkt_unit(struct nitrox_device *ndev) +{ + /* config input and solicit ports */ + nitrox_config_pkt_input_rings(ndev); + nitrox_config_pkt_solicit_ports(ndev); + + /* enable nps packet interrupts */ + enable_nps_pkt_interrupts(ndev); +} + +static void reset_aqm_ring(struct nitrox_device *ndev, int ring) +{ + union aqmq_en aqmq_en_reg; + union aqmq_activity_stat activity_stat; + union aqmq_cmp_cnt cmp_cnt; + int max_retries = MAX_CSR_RETRIES; + u64 offset; + + /* step 1: disable the queue */ + offset = AQMQ_ENX(ring); + aqmq_en_reg.value = 0; + aqmq_en_reg.queue_enable = 0; + nitrox_write_csr(ndev, offset, aqmq_en_reg.value); + + /* step 2: wait for AQMQ_ACTIVITY_STATX[QUEUE_ACTIVE] to clear */ + usleep_range(100, 150); + offset = AQMQ_ACTIVITY_STATX(ring); + do { + activity_stat.value = nitrox_read_csr(ndev, offset); + if (!activity_stat.queue_active) + break; + udelay(50); + } while (max_retries--); + + /* step 3: clear commands completed count */ + offset = AQMQ_CMP_CNTX(ring); + cmp_cnt.value = nitrox_read_csr(ndev, offset); + nitrox_write_csr(ndev, offset, cmp_cnt.value); + usleep_range(50, 100); +} + +void enable_aqm_ring(struct nitrox_device *ndev, int ring) +{ + union aqmq_en aqmq_en_reg; + u64 offset; + + offset = AQMQ_ENX(ring); + aqmq_en_reg.value = 0; + aqmq_en_reg.queue_enable = 1; + nitrox_write_csr(ndev, offset, aqmq_en_reg.value); + usleep_range(50, 100); +} + +void nitrox_config_aqm_rings(struct nitrox_device *ndev) +{ + int ring; + + for (ring = 0; ring < ndev->nr_queues; ring++) { + struct nitrox_cmdq *cmdq = ndev->aqmq[ring]; + union aqmq_drbl drbl; + union aqmq_qsz qsize; + union aqmq_cmp_thr cmp_thr; + u64 offset; + + /* steps 1 - 3 */ + reset_aqm_ring(ndev, ring); + + /* step 4: clear doorbell count of ring */ + offset = AQMQ_DRBLX(ring); + drbl.value = 0; + drbl.dbell_count = 0xFFFFFFFF; + nitrox_write_csr(ndev, offset, drbl.value); + + /* step 5: configure host ring details */ + + /* set host address for next command of ring */ + offset = AQMQ_NXT_CMDX(ring); + nitrox_write_csr(ndev, offset, 0ULL); + + /* set host address of ring base */ + offset = AQMQ_BADRX(ring); + nitrox_write_csr(ndev, offset, cmdq->dma); + + /* set ring size */ + offset = AQMQ_QSZX(ring); + qsize.value = 0; + qsize.host_queue_size = ndev->qlen; + nitrox_write_csr(ndev, offset, qsize.value); + + /* set command completion threshold */ + offset = AQMQ_CMP_THRX(ring); + cmp_thr.value = 0; + cmp_thr.commands_completed_threshold = 1; + nitrox_write_csr(ndev, offset, cmp_thr.value); + + /* step 6: enable the queue */ + enable_aqm_ring(ndev, ring); + } +} + +static void enable_aqm_interrupts(struct nitrox_device *ndev) +{ + /* clear interrupt enable bits */ + nitrox_write_csr(ndev, AQM_DBELL_OVF_LO_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, AQM_DBELL_OVF_HI_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, AQM_DMA_RD_ERR_LO_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, AQM_DMA_RD_ERR_HI_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, AQM_EXEC_NA_LO_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, AQM_EXEC_NA_HI_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, AQM_EXEC_ERR_LO_ENA_W1S, (~0ULL)); + nitrox_write_csr(ndev, AQM_EXEC_ERR_HI_ENA_W1S, (~0ULL)); +} + +void nitrox_config_aqm_unit(struct nitrox_device *ndev) +{ + /* config aqm command queues */ + nitrox_config_aqm_rings(ndev); + + /* enable aqm interrupts */ + enable_aqm_interrupts(ndev); +} + +void nitrox_config_pom_unit(struct nitrox_device *ndev) +{ + union pom_int_ena_w1s pom_int; + int i; + + /* enable pom interrupts */ + pom_int.value = 0; + pom_int.s.illegal_dport = 1; + nitrox_write_csr(ndev, POM_INT_ENA_W1S, pom_int.value); + + /* enable perf counters */ + for (i = 0; i < ndev->hw.se_cores; i++) + nitrox_write_csr(ndev, POM_PERF_CTL, BIT_ULL(i)); +} + +/** + * nitrox_config_rand_unit - enable NITROX random number unit + * @ndev: NITROX device + */ +void nitrox_config_rand_unit(struct nitrox_device *ndev) +{ + union efl_rnm_ctl_status efl_rnm_ctl; + u64 offset; + + offset = EFL_RNM_CTL_STATUS; + efl_rnm_ctl.value = nitrox_read_csr(ndev, offset); + efl_rnm_ctl.s.ent_en = 1; + efl_rnm_ctl.s.rng_en = 1; + nitrox_write_csr(ndev, offset, efl_rnm_ctl.value); +} + +void nitrox_config_efl_unit(struct nitrox_device *ndev) +{ + int i; + + for (i = 0; i < NR_CLUSTERS; i++) { + union efl_core_int_ena_w1s efl_core_int; + u64 offset; + + /* EFL core interrupts */ + offset = EFL_CORE_INT_ENA_W1SX(i); + efl_core_int.value = 0; + efl_core_int.s.len_ovr = 1; + efl_core_int.s.d_left = 1; + efl_core_int.s.epci_decode_err = 1; + nitrox_write_csr(ndev, offset, efl_core_int.value); + + offset = EFL_CORE_VF_ERR_INT0_ENA_W1SX(i); + nitrox_write_csr(ndev, offset, (~0ULL)); + offset = EFL_CORE_VF_ERR_INT1_ENA_W1SX(i); + nitrox_write_csr(ndev, offset, (~0ULL)); + } +} + +void nitrox_config_bmi_unit(struct nitrox_device *ndev) +{ + union bmi_ctl bmi_ctl; + union bmi_int_ena_w1s bmi_int_ena; + u64 offset; + + /* no threshold limits for PCIe */ + offset = BMI_CTL; + bmi_ctl.value = nitrox_read_csr(ndev, offset); + bmi_ctl.s.max_pkt_len = 0xff; + bmi_ctl.s.nps_free_thrsh = 0xff; + bmi_ctl.s.nps_hdrq_thrsh = 0x7a; + nitrox_write_csr(ndev, offset, bmi_ctl.value); + + /* enable interrupts */ + offset = BMI_INT_ENA_W1S; + bmi_int_ena.value = 0; + bmi_int_ena.s.max_len_err_nps = 1; + bmi_int_ena.s.pkt_rcv_err_nps = 1; + bmi_int_ena.s.fpf_undrrn = 1; + nitrox_write_csr(ndev, offset, bmi_int_ena.value); +} + +void nitrox_config_bmo_unit(struct nitrox_device *ndev) +{ + union bmo_ctl2 bmo_ctl2; + u64 offset; + + /* no threshold limits for PCIe */ + offset = BMO_CTL2; + bmo_ctl2.value = nitrox_read_csr(ndev, offset); + bmo_ctl2.s.nps_slc_buf_thrsh = 0xff; + nitrox_write_csr(ndev, offset, bmo_ctl2.value); +} + +void invalidate_lbc(struct nitrox_device *ndev) +{ + union lbc_inval_ctl lbc_ctl; + union lbc_inval_status lbc_stat; + int max_retries = MAX_CSR_RETRIES; + u64 offset; + + /* invalidate LBC */ + offset = LBC_INVAL_CTL; + lbc_ctl.value = nitrox_read_csr(ndev, offset); + lbc_ctl.s.cam_inval_start = 1; + nitrox_write_csr(ndev, offset, lbc_ctl.value); + + offset = LBC_INVAL_STATUS; + do { + lbc_stat.value = nitrox_read_csr(ndev, offset); + if (lbc_stat.s.done) + break; + udelay(50); + } while (max_retries--); +} + +void nitrox_config_lbc_unit(struct nitrox_device *ndev) +{ + union lbc_int_ena_w1s lbc_int_ena; + u64 offset; + + invalidate_lbc(ndev); + + /* enable interrupts */ + offset = LBC_INT_ENA_W1S; + lbc_int_ena.value = 0; + lbc_int_ena.s.dma_rd_err = 1; + lbc_int_ena.s.over_fetch_err = 1; + lbc_int_ena.s.cam_inval_abort = 1; + lbc_int_ena.s.cam_hard_err = 1; + nitrox_write_csr(ndev, offset, lbc_int_ena.value); + + offset = LBC_PLM_VF1_64_INT_ENA_W1S; + nitrox_write_csr(ndev, offset, (~0ULL)); + offset = LBC_PLM_VF65_128_INT_ENA_W1S; + nitrox_write_csr(ndev, offset, (~0ULL)); + + offset = LBC_ELM_VF1_64_INT_ENA_W1S; + nitrox_write_csr(ndev, offset, (~0ULL)); + offset = LBC_ELM_VF65_128_INT_ENA_W1S; + nitrox_write_csr(ndev, offset, (~0ULL)); +} + +void config_nps_core_vfcfg_mode(struct nitrox_device *ndev, enum vf_mode mode) +{ + union nps_core_gbl_vfcfg vfcfg; + + vfcfg.value = nitrox_read_csr(ndev, NPS_CORE_GBL_VFCFG); + vfcfg.s.cfg = mode & 0x7; + + nitrox_write_csr(ndev, NPS_CORE_GBL_VFCFG, vfcfg.value); +} + +static const char *get_core_option(u8 se_cores, u8 ae_cores) +{ + const char *option = ""; + + if (ae_cores == AE_MAX_CORES) { + switch (se_cores) { + case SE_MAX_CORES: + option = "60"; + break; + case 40: + option = "60s"; + break; + } + } else if (ae_cores == (AE_MAX_CORES / 2)) { + option = "30"; + } else { + option = "60i"; + } + + return option; +} + +static const char *get_feature_option(u8 zip_cores, int core_freq) +{ + if (zip_cores == 0) + return ""; + else if (zip_cores < ZIP_MAX_CORES) + return "-C15"; + + if (core_freq >= 850) + return "-C45"; + else if (core_freq >= 750) + return "-C35"; + else if (core_freq >= 550) + return "-C25"; + + return ""; +} + +void nitrox_get_hwinfo(struct nitrox_device *ndev) +{ + union emu_fuse_map emu_fuse; + union rst_boot rst_boot; + union fus_dat1 fus_dat1; + unsigned char name[IFNAMSIZ * 2] = {}; + int i, dead_cores; + u64 offset; + + /* get core frequency */ + offset = RST_BOOT; + rst_boot.value = nitrox_read_csr(ndev, offset); + ndev->hw.freq = (rst_boot.pnr_mul + 3) * PLL_REF_CLK; + + for (i = 0; i < NR_CLUSTERS; i++) { + offset = EMU_FUSE_MAPX(i); + emu_fuse.value = nitrox_read_csr(ndev, offset); + if (emu_fuse.s.valid) { + dead_cores = hweight32(emu_fuse.s.ae_fuse); + ndev->hw.ae_cores += AE_CORES_PER_CLUSTER - dead_cores; + dead_cores = hweight16(emu_fuse.s.se_fuse); + ndev->hw.se_cores += SE_CORES_PER_CLUSTER - dead_cores; + } + } + /* find zip hardware availability */ + offset = FUS_DAT1; + fus_dat1.value = nitrox_read_csr(ndev, offset); + if (!fus_dat1.nozip) { + dead_cores = hweight8(fus_dat1.zip_info); + ndev->hw.zip_cores = ZIP_MAX_CORES - dead_cores; + } + + /* determine the partname + * CNN55<core option>-<freq><pincount>-<feature option>-<rev> + */ + snprintf(name, sizeof(name), "CNN55%s-%3dBG676%s-1.%u", + get_core_option(ndev->hw.se_cores, ndev->hw.ae_cores), + ndev->hw.freq, + get_feature_option(ndev->hw.zip_cores, ndev->hw.freq), + ndev->hw.revision_id); + + /* copy partname */ + strncpy(ndev->hw.partname, name, sizeof(ndev->hw.partname)); +} + +void enable_pf2vf_mbox_interrupts(struct nitrox_device *ndev) +{ + u64 value = ~0ULL; + u64 reg_addr; + + /* Mailbox interrupt low enable set register */ + reg_addr = NPS_PKT_MBOX_INT_LO_ENA_W1S; + nitrox_write_csr(ndev, reg_addr, value); + + /* Mailbox interrupt high enable set register */ + reg_addr = NPS_PKT_MBOX_INT_HI_ENA_W1S; + nitrox_write_csr(ndev, reg_addr, value); +} + +void disable_pf2vf_mbox_interrupts(struct nitrox_device *ndev) +{ + u64 value = ~0ULL; + u64 reg_addr; + + /* Mailbox interrupt low enable clear register */ + reg_addr = NPS_PKT_MBOX_INT_LO_ENA_W1C; + nitrox_write_csr(ndev, reg_addr, value); + + /* Mailbox interrupt high enable clear register */ + reg_addr = NPS_PKT_MBOX_INT_HI_ENA_W1C; + nitrox_write_csr(ndev, reg_addr, value); +} |