summaryrefslogtreecommitdiffstats
path: root/drivers/cxl/mem.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/cxl/mem.c168
1 files changed, 168 insertions, 0 deletions
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
new file mode 100644
index 000000000..80263d12a
--- /dev/null
+++ b/drivers/cxl/mem.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2022 Intel Corporation. All rights reserved. */
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "cxlmem.h"
+#include "cxlpci.h"
+
+/**
+ * DOC: cxl mem
+ *
+ * CXL memory endpoint devices and switches are CXL capable devices that are
+ * participating in CXL.mem protocol. Their functionality builds on top of the
+ * CXL.io protocol that allows enumerating and configuring components via
+ * standard PCI mechanisms.
+ *
+ * The cxl_mem driver owns kicking off the enumeration of this CXL.mem
+ * capability. With the detection of a CXL capable endpoint, the driver will
+ * walk up to find the platform specific port it is connected to, and determine
+ * if there are intervening switches in the path. If there are switches, a
+ * secondary action is to enumerate those (implemented in cxl_core). Finally the
+ * cxl_mem driver adds the device it is bound to as a CXL endpoint-port for use
+ * in higher level operations.
+ */
+
+static void enable_suspend(void *data)
+{
+ cxl_mem_active_dec();
+}
+
+static void remove_debugfs(void *dentry)
+{
+ debugfs_remove_recursive(dentry);
+}
+
+static int cxl_mem_dpa_show(struct seq_file *file, void *data)
+{
+ struct device *dev = file->private;
+ struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+
+ cxl_dpa_debug(file, cxlmd->cxlds);
+
+ return 0;
+}
+
+static int devm_cxl_add_endpoint(struct cxl_memdev *cxlmd,
+ struct cxl_dport *parent_dport)
+{
+ struct cxl_port *parent_port = parent_dport->port;
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+ struct cxl_port *endpoint, *iter, *down;
+ int rc;
+
+ /*
+ * Now that the path to the root is established record all the
+ * intervening ports in the chain.
+ */
+ for (iter = parent_port, down = NULL; !is_cxl_root(iter);
+ down = iter, iter = to_cxl_port(iter->dev.parent)) {
+ struct cxl_ep *ep;
+
+ ep = cxl_ep_load(iter, cxlmd);
+ ep->next = down;
+ }
+
+ endpoint = devm_cxl_add_port(&parent_port->dev, &cxlmd->dev,
+ cxlds->component_reg_phys, parent_dport);
+ if (IS_ERR(endpoint))
+ return PTR_ERR(endpoint);
+
+ rc = cxl_endpoint_autoremove(cxlmd, endpoint);
+ if (rc)
+ return rc;
+
+ if (!endpoint->dev.driver) {
+ dev_err(&cxlmd->dev, "%s failed probe\n",
+ dev_name(&endpoint->dev));
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static int cxl_mem_probe(struct device *dev)
+{
+ struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+ struct cxl_port *parent_port;
+ struct cxl_dport *dport;
+ struct dentry *dentry;
+ int rc;
+
+ /*
+ * Someone is trying to reattach this device after it lost its port
+ * connection (an endpoint port previously registered by this memdev was
+ * disabled). This racy check is ok because if the port is still gone,
+ * no harm done, and if the port hierarchy comes back it will re-trigger
+ * this probe. Port rescan and memdev detach work share the same
+ * single-threaded workqueue.
+ */
+ if (work_pending(&cxlmd->detach_work))
+ return -EBUSY;
+
+ dentry = cxl_debugfs_create_dir(dev_name(dev));
+ debugfs_create_devm_seqfile(dev, "dpamem", dentry, cxl_mem_dpa_show);
+ rc = devm_add_action_or_reset(dev, remove_debugfs, dentry);
+ if (rc)
+ return rc;
+
+ rc = devm_cxl_enumerate_ports(cxlmd);
+ if (rc)
+ return rc;
+
+ parent_port = cxl_mem_find_port(cxlmd, &dport);
+ if (!parent_port) {
+ dev_err(dev, "CXL port topology not found\n");
+ return -ENXIO;
+ }
+
+ device_lock(&parent_port->dev);
+ if (!parent_port->dev.driver) {
+ dev_err(dev, "CXL port topology %s not enabled\n",
+ dev_name(&parent_port->dev));
+ rc = -ENXIO;
+ goto unlock;
+ }
+
+ rc = devm_cxl_add_endpoint(cxlmd, dport);
+unlock:
+ device_unlock(&parent_port->dev);
+ put_device(&parent_port->dev);
+ if (rc)
+ return rc;
+
+ /*
+ * The kernel may be operating out of CXL memory on this device,
+ * there is no spec defined way to determine whether this device
+ * preserves contents over suspend, and there is no simple way
+ * to arrange for the suspend image to avoid CXL memory which
+ * would setup a circular dependency between PCI resume and save
+ * state restoration.
+ *
+ * TODO: support suspend when all the regions this device is
+ * hosting are locked and covered by the system address map,
+ * i.e. platform firmware owns restoring the HDM configuration
+ * that it locked.
+ */
+ cxl_mem_active_inc();
+ return devm_add_action_or_reset(dev, enable_suspend, NULL);
+}
+
+static struct cxl_driver cxl_mem_driver = {
+ .name = "cxl_mem",
+ .probe = cxl_mem_probe,
+ .id = CXL_DEVICE_MEMORY_EXPANDER,
+};
+
+module_cxl_driver(cxl_mem_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(CXL);
+MODULE_ALIAS_CXL(CXL_DEVICE_MEMORY_EXPANDER);
+/*
+ * create_endpoint() wants to validate port driver attach immediately after
+ * endpoint registration.
+ */
+MODULE_SOFTDEP("pre: cxl_port");