summaryrefslogtreecommitdiffstats
path: root/drivers/firmware/xilinx/zynqmp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/firmware/xilinx/zynqmp.c')
-rw-r--r--drivers/firmware/xilinx/zynqmp.c1824
1 files changed, 1824 insertions, 0 deletions
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
new file mode 100644
index 000000000..6587fa857
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -0,0 +1,1824 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ * Copyright (C) 2014-2022 Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Davorin Mista <davorin.mista@aggios.com>
+ * Jolly Shah <jollys@xilinx.com>
+ * Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/hashtable.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/firmware/xlnx-event-manager.h>
+#include "zynqmp-debug.h"
+
+/* Max HashMap Order for PM API feature check (1<<7 = 128) */
+#define PM_API_FEATURE_CHECK_MAX_ORDER 7
+
+/* CRL registers and bitfields */
+#define CRL_APB_BASE 0xFF5E0000U
+/* BOOT_PIN_CTRL- Used to control the mode pins after boot */
+#define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + (0x250U))
+/* BOOT_PIN_CTRL_MASK- out_val[11:8], out_en[3:0] */
+#define CRL_APB_BOOTPIN_CTRL_MASK 0xF0FU
+
+/* IOCTL/QUERY feature payload size */
+#define FEATURE_PAYLOAD_SIZE 2
+
+/* Firmware feature check version mask */
+#define FIRMWARE_VERSION_MASK GENMASK(15, 0)
+
+static bool feature_check_enabled;
+static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
+static u32 ioctl_features[FEATURE_PAYLOAD_SIZE];
+static u32 query_features[FEATURE_PAYLOAD_SIZE];
+
+static struct platform_device *em_dev;
+
+/**
+ * struct zynqmp_devinfo - Structure for Zynqmp device instance
+ * @dev: Device Pointer
+ * @feature_conf_id: Feature conf id
+ */
+struct zynqmp_devinfo {
+ struct device *dev;
+ u32 feature_conf_id;
+};
+
+/**
+ * struct pm_api_feature_data - PM API Feature data
+ * @pm_api_id: PM API Id, used as key to index into hashmap
+ * @feature_status: status of PM API feature: valid, invalid
+ * @hentry: hlist_node that hooks this entry into hashtable
+ */
+struct pm_api_feature_data {
+ u32 pm_api_id;
+ int feature_status;
+ struct hlist_node hentry;
+};
+
+static const struct mfd_cell firmware_devs[] = {
+ {
+ .name = "zynqmp_power_controller",
+ },
+};
+
+/**
+ * zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes
+ * @ret_status: PMUFW return code
+ *
+ * Return: corresponding Linux error code
+ */
+static int zynqmp_pm_ret_code(u32 ret_status)
+{
+ switch (ret_status) {
+ case XST_PM_SUCCESS:
+ case XST_PM_DOUBLE_REQ:
+ return 0;
+ case XST_PM_NO_FEATURE:
+ return -ENOTSUPP;
+ case XST_PM_NO_ACCESS:
+ return -EACCES;
+ case XST_PM_ABORT_SUSPEND:
+ return -ECANCELED;
+ case XST_PM_MULT_USER:
+ return -EUSERS;
+ case XST_PM_INTERNAL:
+ case XST_PM_CONFLICT:
+ case XST_PM_INVALID_NODE:
+ default:
+ return -EINVAL;
+ }
+}
+
+static noinline int do_fw_call_fail(u64 arg0, u64 arg1, u64 arg2,
+ u32 *ret_payload)
+{
+ return -ENODEV;
+}
+
+/*
+ * PM function call wrapper
+ * Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration
+ */
+static int (*do_fw_call)(u64, u64, u64, u32 *ret_payload) = do_fw_call_fail;
+
+/**
+ * do_fw_call_smc() - Call system-level platform management layer (SMC)
+ * @arg0: Argument 0 to SMC call
+ * @arg1: Argument 1 to SMC call
+ * @arg2: Argument 2 to SMC call
+ * @ret_payload: Returned value array
+ *
+ * Invoke platform management function via SMC call (no hypervisor present).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_smc(u64 arg0, u64 arg1, u64 arg2,
+ u32 *ret_payload)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+ if (ret_payload) {
+ ret_payload[0] = lower_32_bits(res.a0);
+ ret_payload[1] = upper_32_bits(res.a0);
+ ret_payload[2] = lower_32_bits(res.a1);
+ ret_payload[3] = upper_32_bits(res.a1);
+ }
+
+ return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+/**
+ * do_fw_call_hvc() - Call system-level platform management layer (HVC)
+ * @arg0: Argument 0 to HVC call
+ * @arg1: Argument 1 to HVC call
+ * @arg2: Argument 2 to HVC call
+ * @ret_payload: Returned value array
+ *
+ * Invoke platform management function via HVC
+ * HVC-based for communication through hypervisor
+ * (no direct communication with ATF).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
+ u32 *ret_payload)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_hvc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+ if (ret_payload) {
+ ret_payload[0] = lower_32_bits(res.a0);
+ ret_payload[1] = upper_32_bits(res.a0);
+ ret_payload[2] = lower_32_bits(res.a1);
+ ret_payload[3] = upper_32_bits(res.a1);
+ }
+
+ return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+static int __do_feature_check_call(const u32 api_id, u32 *ret_payload)
+{
+ int ret;
+ u64 smc_arg[2];
+
+ smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
+ smc_arg[1] = api_id;
+
+ ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
+ if (ret)
+ ret = -EOPNOTSUPP;
+ else
+ ret = ret_payload[1];
+
+ return ret;
+}
+
+static int do_feature_check_call(const u32 api_id)
+{
+ int ret;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ struct pm_api_feature_data *feature_data;
+
+ /* Check for existing entry in hash table for given api */
+ hash_for_each_possible(pm_api_features_map, feature_data, hentry,
+ api_id) {
+ if (feature_data->pm_api_id == api_id)
+ return feature_data->feature_status;
+ }
+
+ /* Add new entry if not present */
+ feature_data = kmalloc(sizeof(*feature_data), GFP_ATOMIC);
+ if (!feature_data)
+ return -ENOMEM;
+
+ feature_data->pm_api_id = api_id;
+ ret = __do_feature_check_call(api_id, ret_payload);
+
+ feature_data->feature_status = ret;
+ hash_add(pm_api_features_map, &feature_data->hentry, api_id);
+
+ if (api_id == PM_IOCTL)
+ /* Store supported IOCTL IDs mask */
+ memcpy(ioctl_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4);
+ else if (api_id == PM_QUERY_DATA)
+ /* Store supported QUERY IDs mask */
+ memcpy(query_features, &ret_payload[2], FEATURE_PAYLOAD_SIZE * 4);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_feature);
+
+/**
+ * zynqmp_pm_feature() - Check whether given feature is supported or not and
+ * store supported IOCTL/QUERY ID mask
+ * @api_id: API ID to check
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_feature(const u32 api_id)
+{
+ int ret;
+
+ if (!feature_check_enabled)
+ return 0;
+
+ ret = do_feature_check_call(api_id);
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_is_function_supported() - Check whether given IOCTL/QUERY function
+ * is supported or not
+ * @api_id: PM_IOCTL or PM_QUERY_DATA
+ * @id: IOCTL or QUERY function IDs
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id)
+{
+ int ret;
+ u32 *bit_mask;
+
+ /* Input arguments validation */
+ if (id >= 64 || (api_id != PM_IOCTL && api_id != PM_QUERY_DATA))
+ return -EINVAL;
+
+ /* Check feature check API version */
+ ret = do_feature_check_call(PM_FEATURE_CHECK);
+ if (ret < 0)
+ return ret;
+
+ /* Check if feature check version 2 is supported or not */
+ if ((ret & FIRMWARE_VERSION_MASK) == PM_API_VERSION_2) {
+ /*
+ * Call feature check for IOCTL/QUERY API to get IOCTL ID or
+ * QUERY ID feature status.
+ */
+ ret = do_feature_check_call(api_id);
+ if (ret < 0)
+ return ret;
+
+ bit_mask = (api_id == PM_IOCTL) ? ioctl_features : query_features;
+
+ if ((bit_mask[(id / 32)] & BIT((id % 32))) == 0U)
+ return -EOPNOTSUPP;
+ } else {
+ return -ENODATA;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_is_function_supported);
+
+/**
+ * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
+ * caller function depending on the configuration
+ * @pm_api_id: Requested PM-API call
+ * @arg0: Argument 0 to requested PM-API call
+ * @arg1: Argument 1 to requested PM-API call
+ * @arg2: Argument 2 to requested PM-API call
+ * @arg3: Argument 3 to requested PM-API call
+ * @ret_payload: Returned value array
+ *
+ * Invoke platform management function for SMC or HVC call, depending on
+ * configuration.
+ * Following SMC Calling Convention (SMCCC) for SMC64:
+ * Pm Function Identifier,
+ * PM_SIP_SVC + PM_API_ID =
+ * ((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT)
+ * ((SMC_64) << FUNCID_CC_SHIFT)
+ * ((SIP_START) << FUNCID_OEN_SHIFT)
+ * ((PM_API_ID) & FUNCID_NUM_MASK))
+ *
+ * PM_SIP_SVC - Registered ZynqMP SIP Service Call.
+ * PM_API_ID - Platform Management API ID.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+ u32 arg2, u32 arg3, u32 *ret_payload)
+{
+ /*
+ * Added SIP service call Function Identifier
+ * Make sure to stay in x0 register
+ */
+ u64 smc_arg[4];
+ int ret;
+
+ /* Check if feature is supported or not */
+ ret = zynqmp_pm_feature(pm_api_id);
+ if (ret < 0)
+ return ret;
+
+ smc_arg[0] = PM_SIP_SVC | pm_api_id;
+ smc_arg[1] = ((u64)arg1 << 32) | arg0;
+ smc_arg[2] = ((u64)arg3 << 32) | arg2;
+
+ return do_fw_call(smc_arg[0], smc_arg[1], smc_arg[2], ret_payload);
+}
+
+static u32 pm_api_version;
+static u32 pm_tz_version;
+
+int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset)
+{
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(TF_A_PM_REGISTER_SGI, sgi_num, reset, 0, 0,
+ NULL);
+ if (!ret)
+ return ret;
+
+ /* try old implementation as fallback strategy if above fails */
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, sgi_num,
+ reset, NULL);
+}
+
+/**
+ * zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
+ * @version: Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_get_api_version(u32 *version)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!version)
+ return -EINVAL;
+
+ /* Check is PM API version already verified */
+ if (pm_api_version > 0) {
+ *version = pm_api_version;
+ return 0;
+ }
+ ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, 0, 0, 0, 0, ret_payload);
+ *version = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_api_version);
+
+/**
+ * zynqmp_pm_get_chipid - Get silicon ID registers
+ * @idcode: IDCODE register
+ * @version: version register
+ *
+ * Return: Returns the status of the operation and the idcode and version
+ * registers in @idcode and @version.
+ */
+int zynqmp_pm_get_chipid(u32 *idcode, u32 *version)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!idcode || !version)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
+ *idcode = ret_payload[1];
+ *version = ret_payload[2];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_chipid);
+
+/**
+ * zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version
+ * @version: Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_get_trustzone_version(u32 *version)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!version)
+ return -EINVAL;
+
+ /* Check is PM trustzone version already verified */
+ if (pm_tz_version > 0) {
+ *version = pm_tz_version;
+ return 0;
+ }
+ ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, 0, 0,
+ 0, 0, ret_payload);
+ *version = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * get_set_conduit_method() - Choose SMC or HVC based communication
+ * @np: Pointer to the device_node structure
+ *
+ * Use SMC or HVC-based functions to communicate with EL2/EL3.
+ *
+ * Return: Returns 0 on success or error code
+ */
+static int get_set_conduit_method(struct device_node *np)
+{
+ const char *method;
+
+ if (of_property_read_string(np, "method", &method)) {
+ pr_warn("%s missing \"method\" property\n", __func__);
+ return -ENXIO;
+ }
+
+ if (!strcmp("hvc", method)) {
+ do_fw_call = do_fw_call_hvc;
+ } else if (!strcmp("smc", method)) {
+ do_fw_call = do_fw_call_smc;
+ } else {
+ pr_warn("%s Invalid \"method\" property: %s\n",
+ __func__, method);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * zynqmp_pm_query_data() - Get query data from firmware
+ * @qdata: Variable to the zynqmp_pm_query_data structure
+ * @out: Returned output value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out)
+{
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
+ qdata.arg2, qdata.arg3, out);
+
+ /*
+ * For clock name query, all bytes in SMC response are clock name
+ * characters and return code is always success. For invalid clocks,
+ * clock name bytes would be zeros.
+ */
+ return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_query_data);
+
+/**
+ * zynqmp_pm_clock_enable() - Enable the clock for given id
+ * @clock_id: ID of the clock to be enabled
+ *
+ * This function is used by master to enable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_enable(u32 clock_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_enable);
+
+/**
+ * zynqmp_pm_clock_disable() - Disable the clock for given id
+ * @clock_id: ID of the clock to be disable
+ *
+ * This function is used by master to disable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_disable(u32 clock_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_disable);
+
+/**
+ * zynqmp_pm_clock_getstate() - Get the clock state for given id
+ * @clock_id: ID of the clock to be queried
+ * @state: 1/0 (Enabled/Disabled)
+ *
+ * This function is used by master to get the state of clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0,
+ 0, 0, ret_payload);
+ *state = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getstate);
+
+/**
+ * zynqmp_pm_clock_setdivider() - Set the clock divider for given id
+ * @clock_id: ID of the clock
+ * @divider: divider value
+ *
+ * This function is used by master to set divider for any clock
+ * to achieve desired rate.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider,
+ 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setdivider);
+
+/**
+ * zynqmp_pm_clock_getdivider() - Get the clock divider for given id
+ * @clock_id: ID of the clock
+ * @divider: divider value
+ *
+ * This function is used by master to get divider values
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0,
+ 0, 0, ret_payload);
+ *divider = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getdivider);
+
+/**
+ * zynqmp_pm_clock_setrate() - Set the clock rate for given id
+ * @clock_id: ID of the clock
+ * @rate: rate value in hz
+ *
+ * This function is used by master to set rate for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id,
+ lower_32_bits(rate),
+ upper_32_bits(rate),
+ 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setrate);
+
+/**
+ * zynqmp_pm_clock_getrate() - Get the clock rate for given id
+ * @clock_id: ID of the clock
+ * @rate: rate value in hz
+ *
+ * This function is used by master to get rate
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0,
+ 0, 0, ret_payload);
+ *rate = ((u64)ret_payload[2] << 32) | ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getrate);
+
+/**
+ * zynqmp_pm_clock_setparent() - Set the clock parent for given id
+ * @clock_id: ID of the clock
+ * @parent_id: parent id
+ *
+ * This function is used by master to set parent for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id,
+ parent_id, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setparent);
+
+/**
+ * zynqmp_pm_clock_getparent() - Get the clock parent for given id
+ * @clock_id: ID of the clock
+ * @parent_id: parent id
+ *
+ * This function is used by master to get parent index
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0,
+ 0, 0, ret_payload);
+ *parent_id = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getparent);
+
+/**
+ * zynqmp_pm_set_pll_frac_mode() - PM API for set PLL mode
+ *
+ * @clk_id: PLL clock ID
+ * @mode: PLL mode (PLL_MODE_FRAC/PLL_MODE_INT)
+ *
+ * This function sets PLL mode
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_pll_frac_mode(u32 clk_id, u32 mode)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_MODE,
+ clk_id, mode, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_mode);
+
+/**
+ * zynqmp_pm_get_pll_frac_mode() - PM API for get PLL mode
+ *
+ * @clk_id: PLL clock ID
+ * @mode: PLL mode
+ *
+ * This function return current PLL mode
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_get_pll_frac_mode(u32 clk_id, u32 *mode)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_MODE,
+ clk_id, 0, mode);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_mode);
+
+/**
+ * zynqmp_pm_set_pll_frac_data() - PM API for setting pll fraction data
+ *
+ * @clk_id: PLL clock ID
+ * @data: fraction data
+ *
+ * This function sets fraction data.
+ * It is valid for fraction mode only.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_DATA,
+ clk_id, data, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_data);
+
+/**
+ * zynqmp_pm_get_pll_frac_data() - PM API for getting pll fraction data
+ *
+ * @clk_id: PLL clock ID
+ * @data: fraction data
+ *
+ * This function returns fraction data value.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_DATA,
+ clk_id, 0, data);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
+
+/**
+ * zynqmp_pm_set_sd_tapdelay() - Set tap delay for the SD device
+ *
+ * @node_id: Node ID of the device
+ * @type: Type of tap delay to set (input/output)
+ * @value: Value to set fot the tap delay
+ *
+ * This function sets input/output tap delay for the SD device.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SET_SD_TAPDELAY,
+ type, value, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
+
+/**
+ * zynqmp_pm_sd_dll_reset() - Reset DLL logic
+ *
+ * @node_id: Node ID of the device
+ * @type: Reset type
+ *
+ * This function resets DLL logic for the SD device.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SD_DLL_RESET,
+ type, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
+
+/**
+ * zynqmp_pm_ospi_mux_select() - OSPI Mux selection
+ *
+ * @dev_id: Device Id of the OSPI device.
+ * @select: OSPI Mux select value.
+ *
+ * This function select the OSPI Mux.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, dev_id, IOCTL_OSPI_MUX_SELECT,
+ select, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_ospi_mux_select);
+
+/**
+ * zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
+ * @index: GGS register index
+ * @value: Register value to be written
+ *
+ * This function writes value to GGS register.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_write_ggs(u32 index, u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_GGS,
+ index, value, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs);
+
+/**
+ * zynqmp_pm_read_ggs() - PM API for reading global general storage (ggs)
+ * @index: GGS register index
+ * @value: Register value to be written
+ *
+ * This function returns GGS register value.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_read_ggs(u32 index, u32 *value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_GGS,
+ index, 0, value);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs);
+
+/**
+ * zynqmp_pm_write_pggs() - PM API for writing persistent global general
+ * storage (pggs)
+ * @index: PGGS register index
+ * @value: Register value to be written
+ *
+ * This function writes value to PGGS register.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_write_pggs(u32 index, u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_PGGS, index, value,
+ NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs);
+
+/**
+ * zynqmp_pm_read_pggs() - PM API for reading persistent global general
+ * storage (pggs)
+ * @index: PGGS register index
+ * @value: Register value to be written
+ *
+ * This function returns PGGS register value.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_read_pggs(u32 index, u32 *value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_PGGS, index, 0,
+ value);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs);
+
+/**
+ * zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status
+ * @value: Status value to be written
+ *
+ * This function sets healthy bit value to indicate boot health status
+ * to firmware.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_boot_health_status(u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_BOOT_HEALTH_STATUS,
+ value, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release)
+ * @reset: Reset to be configured
+ * @assert_flag: Flag stating should reset be asserted (1) or
+ * released (0)
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
+ const enum zynqmp_pm_reset_action assert_flag)
+{
+ return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag,
+ 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_reset_assert);
+
+/**
+ * zynqmp_pm_reset_get_status - Get status of the reset
+ * @reset: Reset whose status should be returned
+ * @status: Returned status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!status)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0,
+ 0, 0, ret_payload);
+ *status = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_reset_get_status);
+
+/**
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address: Address to write to
+ * @size: pl bitstream size
+ * @flags: Bitstream type
+ * -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
+ * -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags)
+{
+ return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+ upper_32_bits(address), size, flags, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_load);
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the pmufw to get the PCAP
+ * status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
+
+/**
+ * zynqmp_pm_pinctrl_request - Request Pin from firmware
+ * @pin: Pin number to request
+ *
+ * This function requests pin from firmware.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_request(const u32 pin)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_REQUEST, pin, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_request);
+
+/**
+ * zynqmp_pm_pinctrl_release - Inform firmware that Pin control is released
+ * @pin: Pin number to release
+ *
+ * This function release pin from firmware.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_release(const u32 pin)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_RELEASE, pin, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_release);
+
+/**
+ * zynqmp_pm_pinctrl_get_function - Read function id set for the given pin
+ * @pin: Pin number
+ * @id: Buffer to store function ID
+ *
+ * This function provides the function currently set for the given pin.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!id)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_PINCTRL_GET_FUNCTION, pin, 0,
+ 0, 0, ret_payload);
+ *id = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_function);
+
+/**
+ * zynqmp_pm_pinctrl_set_function - Set requested function for the pin
+ * @pin: Pin number
+ * @id: Function ID to set
+ *
+ * This function sets requested function for the given pin.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_SET_FUNCTION, pin, id,
+ 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_function);
+
+/**
+ * zynqmp_pm_pinctrl_get_config - Get configuration parameter for the pin
+ * @pin: Pin number
+ * @param: Parameter to get
+ * @value: Buffer to store parameter value
+ *
+ * This function gets requested configuration parameter for the given pin.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
+ u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_GET, pin, param,
+ 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_get_config);
+
+/**
+ * zynqmp_pm_pinctrl_set_config - Set configuration parameter for the pin
+ * @pin: Pin number
+ * @param: Parameter to set
+ * @value: Parameter value to set
+ *
+ * This function sets requested configuration parameter for the given pin.
+ *
+ * Return: Returns status, either success or error+reason.
+ */
+int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
+ u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_PINCTRL_CONFIG_PARAM_SET, pin,
+ param, value, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config);
+
+/**
+ * zynqmp_pm_bootmode_read() - PM Config API for read bootpin status
+ * @ps_mode: Returned output value of ps_mode
+ *
+ * This API function is to be used for notify the power management controller
+ * to read bootpin status.
+ *
+ * Return: status, either success or error+reason
+ */
+unsigned int zynqmp_pm_bootmode_read(u32 *ps_mode)
+{
+ unsigned int ret;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+
+ ret = zynqmp_pm_invoke_fn(PM_MMIO_READ, CRL_APB_BOOT_PIN_CTRL, 0,
+ 0, 0, ret_payload);
+
+ *ps_mode = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_read);
+
+/**
+ * zynqmp_pm_bootmode_write() - PM Config API for Configure bootpin
+ * @ps_mode: Value to be written to the bootpin ctrl register
+ *
+ * This API function is to be used for notify the power management controller
+ * to configure bootpin.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_bootmode_write(u32 ps_mode)
+{
+ return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, CRL_APB_BOOT_PIN_CTRL,
+ CRL_APB_BOOTPIN_CTRL_MASK, ps_mode, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_bootmode_write);
+
+/**
+ * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
+ * master has initialized its own power management
+ *
+ * Return: Returns status, either success or error+reason
+ *
+ * This API function is to be used for notify the power management controller
+ * about the completed power management initialization.
+ */
+int zynqmp_pm_init_finalize(void)
+{
+ return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_init_finalize);
+
+/**
+ * zynqmp_pm_set_suspend_mode() - Set system suspend mode
+ * @mode: Mode to set for system suspend
+ *
+ * This API function is used to set mode of system suspend.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_suspend_mode(u32 mode)
+{
+ return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_suspend_mode);
+
+/**
+ * zynqmp_pm_request_node() - Request a node with specific capabilities
+ * @node: Node ID of the slave
+ * @capabilities: Requested capabilities of the slave
+ * @qos: Quality of service (not supported)
+ * @ack: Flag to specify whether acknowledge is requested
+ *
+ * This function is used by master to request particular node from firmware.
+ * Every master must request node before using it.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
+ const u32 qos, const enum zynqmp_pm_request_ack ack)
+{
+ return zynqmp_pm_invoke_fn(PM_REQUEST_NODE, node, capabilities,
+ qos, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_node);
+
+/**
+ * zynqmp_pm_release_node() - Release a node
+ * @node: Node ID of the slave
+ *
+ * This function is used by master to inform firmware that master
+ * has released node. Once released, master must not use that node
+ * without re-request.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_release_node(const u32 node)
+{
+ return zynqmp_pm_invoke_fn(PM_RELEASE_NODE, node, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
+
+/**
+ * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
+ * @node: Node ID of the slave
+ * @capabilities: Requested capabilities of the slave
+ * @qos: Quality of service (not supported)
+ * @ack: Flag to specify whether acknowledge is requested
+ *
+ * This API function is to be used for slaves a PU already has requested
+ * to change its capabilities.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
+ const u32 qos,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return zynqmp_pm_invoke_fn(PM_SET_REQUIREMENT, node, capabilities,
+ qos, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement);
+
+/**
+ * zynqmp_pm_load_pdi - Load and process PDI
+ * @src: Source device where PDI is located
+ * @address: PDI src address
+ *
+ * This function provides support to load PDI from linux
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_load_pdi(const u32 src, const u64 address)
+{
+ return zynqmp_pm_invoke_fn(PM_LOAD_PDI, src,
+ lower_32_bits(address),
+ upper_32_bits(address), 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_load_pdi);
+
+/**
+ * zynqmp_pm_aes_engine - Access AES hardware to encrypt/decrypt the data using
+ * AES-GCM core.
+ * @address: Address of the AesParams structure.
+ * @out: Returned output value
+ *
+ * Return: Returns status, either success or error code.
+ */
+int zynqmp_pm_aes_engine(const u64 address, u32 *out)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!out)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_SECURE_AES, upper_32_bits(address),
+ lower_32_bits(address),
+ 0, 0, ret_payload);
+ *out = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_aes_engine);
+
+/**
+ * zynqmp_pm_sha_hash - Access the SHA engine to calculate the hash
+ * @address: Address of the data/ Address of output buffer where
+ * hash should be stored.
+ * @size: Size of the data.
+ * @flags:
+ * BIT(0) - for initializing csudma driver and SHA3(Here address
+ * and size inputs can be NULL).
+ * BIT(1) - to call Sha3_Update API which can be called multiple
+ * times when data is not contiguous.
+ * BIT(2) - to get final hash of the whole updated data.
+ * Hash will be overwritten at provided address with
+ * 48 bytes.
+ *
+ * Return: Returns status, either success or error code.
+ */
+int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags)
+{
+ u32 lower_addr = lower_32_bits(address);
+ u32 upper_addr = upper_32_bits(address);
+
+ return zynqmp_pm_invoke_fn(PM_SECURE_SHA, upper_addr, lower_addr,
+ size, flags, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_sha_hash);
+
+/**
+ * zynqmp_pm_register_notifier() - PM API for register a subsystem
+ * to be notified about specific
+ * event/error.
+ * @node: Node ID to which the event is related.
+ * @event: Event Mask of Error events for which wants to get notified.
+ * @wake: Wake subsystem upon capturing the event if value 1
+ * @enable: Enable the registration for value 1, disable for value 0
+ *
+ * This function is used to register/un-register for particular node-event
+ * combination in firmware.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+
+int zynqmp_pm_register_notifier(const u32 node, const u32 event,
+ const u32 wake, const u32 enable)
+{
+ return zynqmp_pm_invoke_fn(PM_REGISTER_NOTIFIER, node, event,
+ wake, enable, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_register_notifier);
+
+/**
+ * zynqmp_pm_system_shutdown - PM call to request a system shutdown or restart
+ * @type: Shutdown or restart? 0 for shutdown, 1 for restart
+ * @subtype: Specifies which system should be restarted or shut down
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype)
+{
+ return zynqmp_pm_invoke_fn(PM_SYSTEM_SHUTDOWN, type, subtype,
+ 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_set_feature_config - PM call to request IOCTL for feature config
+ * @id: The config ID of the feature to be configured
+ * @value: The config value of the feature to be configured
+ *
+ * Return: Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_FEATURE_CONFIG,
+ id, value, NULL);
+}
+
+/**
+ * zynqmp_pm_get_feature_config - PM call to get value of configured feature
+ * @id: The config id of the feature to be queried
+ * @payload: Returned value array
+ *
+ * Return: Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
+ u32 *payload)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_FEATURE_CONFIG,
+ id, 0, payload);
+}
+
+/**
+ * zynqmp_pm_set_sd_config - PM call to set value of SD config registers
+ * @node: SD node ID
+ * @config: The config type of SD registers
+ * @value: Value to be set
+ *
+ * Return: Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, node, IOCTL_SET_SD_CONFIG,
+ config, value, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_config);
+
+/**
+ * zynqmp_pm_set_gem_config - PM call to set value of GEM config registers
+ * @node: GEM node ID
+ * @config: The config type of GEM registers
+ * @value: Value to be set
+ *
+ * Return: Returns 0 on success or error value on failure.
+ */
+int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config,
+ u32 value)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, node, IOCTL_SET_GEM_CONFIG,
+ config, value, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_gem_config);
+
+/**
+ * struct zynqmp_pm_shutdown_scope - Struct for shutdown scope
+ * @subtype: Shutdown subtype
+ * @name: Matching string for scope argument
+ *
+ * This struct encapsulates mapping between shutdown scope ID and string.
+ */
+struct zynqmp_pm_shutdown_scope {
+ const enum zynqmp_pm_shutdown_subtype subtype;
+ const char *name;
+};
+
+static struct zynqmp_pm_shutdown_scope shutdown_scopes[] = {
+ [ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM] = {
+ .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM,
+ .name = "subsystem",
+ },
+ [ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY] = {
+ .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY,
+ .name = "ps_only",
+ },
+ [ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM] = {
+ .subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM,
+ .name = "system",
+ },
+};
+
+static struct zynqmp_pm_shutdown_scope *selected_scope =
+ &shutdown_scopes[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM];
+
+/**
+ * zynqmp_pm_is_shutdown_scope_valid - Check if shutdown scope string is valid
+ * @scope_string: Shutdown scope string
+ *
+ * Return: Return pointer to matching shutdown scope struct from
+ * array of available options in system if string is valid,
+ * otherwise returns NULL.
+ */
+static struct zynqmp_pm_shutdown_scope*
+ zynqmp_pm_is_shutdown_scope_valid(const char *scope_string)
+{
+ int count;
+
+ for (count = 0; count < ARRAY_SIZE(shutdown_scopes); count++)
+ if (sysfs_streq(scope_string, shutdown_scopes[count].name))
+ return &shutdown_scopes[count];
+
+ return NULL;
+}
+
+static ssize_t shutdown_scope_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(shutdown_scopes); i++) {
+ if (&shutdown_scopes[i] == selected_scope) {
+ strcat(buf, "[");
+ strcat(buf, shutdown_scopes[i].name);
+ strcat(buf, "]");
+ } else {
+ strcat(buf, shutdown_scopes[i].name);
+ }
+ strcat(buf, " ");
+ }
+ strcat(buf, "\n");
+
+ return strlen(buf);
+}
+
+static ssize_t shutdown_scope_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ struct zynqmp_pm_shutdown_scope *scope;
+
+ scope = zynqmp_pm_is_shutdown_scope_valid(buf);
+ if (!scope)
+ return -EINVAL;
+
+ ret = zynqmp_pm_system_shutdown(ZYNQMP_PM_SHUTDOWN_TYPE_SETSCOPE_ONLY,
+ scope->subtype);
+ if (ret) {
+ pr_err("unable to set shutdown scope %s\n", buf);
+ return ret;
+ }
+
+ selected_scope = scope;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(shutdown_scope);
+
+static ssize_t health_status_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ unsigned int value;
+
+ ret = kstrtouint(buf, 10, &value);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_boot_health_status(value);
+ if (ret) {
+ dev_err(device, "unable to set healthy bit value to %u\n",
+ value);
+ return ret;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR_WO(health_status);
+
+static ssize_t ggs_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf,
+ u32 reg)
+{
+ int ret;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+
+ ret = zynqmp_pm_read_ggs(reg, ret_payload);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "0x%x\n", ret_payload[1]);
+}
+
+static ssize_t ggs_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count,
+ u32 reg)
+{
+ long value;
+ int ret;
+
+ if (reg >= GSS_NUM_REGS)
+ return -EINVAL;
+
+ ret = kstrtol(buf, 16, &value);
+ if (ret) {
+ count = -EFAULT;
+ goto err;
+ }
+
+ ret = zynqmp_pm_write_ggs(reg, value);
+ if (ret)
+ count = -EFAULT;
+err:
+ return count;
+}
+
+/* GGS register show functions */
+#define GGS0_SHOW(N) \
+ ssize_t ggs##N##_show(struct device *device, \
+ struct device_attribute *attr, \
+ char *buf) \
+ { \
+ return ggs_show(device, attr, buf, N); \
+ }
+
+static GGS0_SHOW(0);
+static GGS0_SHOW(1);
+static GGS0_SHOW(2);
+static GGS0_SHOW(3);
+
+/* GGS register store function */
+#define GGS0_STORE(N) \
+ ssize_t ggs##N##_store(struct device *device, \
+ struct device_attribute *attr, \
+ const char *buf, \
+ size_t count) \
+ { \
+ return ggs_store(device, attr, buf, count, N); \
+ }
+
+static GGS0_STORE(0);
+static GGS0_STORE(1);
+static GGS0_STORE(2);
+static GGS0_STORE(3);
+
+static ssize_t pggs_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf,
+ u32 reg)
+{
+ int ret;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+
+ ret = zynqmp_pm_read_pggs(reg, ret_payload);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "0x%x\n", ret_payload[1]);
+}
+
+static ssize_t pggs_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count,
+ u32 reg)
+{
+ long value;
+ int ret;
+
+ if (reg >= GSS_NUM_REGS)
+ return -EINVAL;
+
+ ret = kstrtol(buf, 16, &value);
+ if (ret) {
+ count = -EFAULT;
+ goto err;
+ }
+
+ ret = zynqmp_pm_write_pggs(reg, value);
+ if (ret)
+ count = -EFAULT;
+
+err:
+ return count;
+}
+
+#define PGGS0_SHOW(N) \
+ ssize_t pggs##N##_show(struct device *device, \
+ struct device_attribute *attr, \
+ char *buf) \
+ { \
+ return pggs_show(device, attr, buf, N); \
+ }
+
+#define PGGS0_STORE(N) \
+ ssize_t pggs##N##_store(struct device *device, \
+ struct device_attribute *attr, \
+ const char *buf, \
+ size_t count) \
+ { \
+ return pggs_store(device, attr, buf, count, N); \
+ }
+
+/* PGGS register show functions */
+static PGGS0_SHOW(0);
+static PGGS0_SHOW(1);
+static PGGS0_SHOW(2);
+static PGGS0_SHOW(3);
+
+/* PGGS register store functions */
+static PGGS0_STORE(0);
+static PGGS0_STORE(1);
+static PGGS0_STORE(2);
+static PGGS0_STORE(3);
+
+/* GGS register attributes */
+static DEVICE_ATTR_RW(ggs0);
+static DEVICE_ATTR_RW(ggs1);
+static DEVICE_ATTR_RW(ggs2);
+static DEVICE_ATTR_RW(ggs3);
+
+/* PGGS register attributes */
+static DEVICE_ATTR_RW(pggs0);
+static DEVICE_ATTR_RW(pggs1);
+static DEVICE_ATTR_RW(pggs2);
+static DEVICE_ATTR_RW(pggs3);
+
+static ssize_t feature_config_id_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
+
+ return sysfs_emit(buf, "%d\n", devinfo->feature_conf_id);
+}
+
+static ssize_t feature_config_id_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 config_id;
+ int ret;
+ struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
+
+ if (!buf)
+ return -EINVAL;
+
+ ret = kstrtou32(buf, 10, &config_id);
+ if (ret)
+ return ret;
+
+ devinfo->feature_conf_id = config_id;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(feature_config_id);
+
+static ssize_t feature_config_value_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
+
+ ret = zynqmp_pm_get_feature_config(devinfo->feature_conf_id,
+ ret_payload);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%d\n", ret_payload[1]);
+}
+
+static ssize_t feature_config_value_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 value;
+ int ret;
+ struct zynqmp_devinfo *devinfo = dev_get_drvdata(device);
+
+ if (!buf)
+ return -EINVAL;
+
+ ret = kstrtou32(buf, 10, &value);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_feature_config(devinfo->feature_conf_id,
+ value);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(feature_config_value);
+
+static struct attribute *zynqmp_firmware_attrs[] = {
+ &dev_attr_ggs0.attr,
+ &dev_attr_ggs1.attr,
+ &dev_attr_ggs2.attr,
+ &dev_attr_ggs3.attr,
+ &dev_attr_pggs0.attr,
+ &dev_attr_pggs1.attr,
+ &dev_attr_pggs2.attr,
+ &dev_attr_pggs3.attr,
+ &dev_attr_shutdown_scope.attr,
+ &dev_attr_health_status.attr,
+ &dev_attr_feature_config_id.attr,
+ &dev_attr_feature_config_value.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(zynqmp_firmware);
+
+static int zynqmp_firmware_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np;
+ struct zynqmp_devinfo *devinfo;
+ int ret;
+
+ ret = get_set_conduit_method(dev->of_node);
+ if (ret)
+ return ret;
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
+ if (!np) {
+ np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
+ if (!np)
+ return 0;
+
+ feature_check_enabled = true;
+ }
+
+ if (!feature_check_enabled) {
+ ret = do_feature_check_call(PM_FEATURE_CHECK);
+ if (ret >= 0)
+ feature_check_enabled = true;
+ }
+
+ of_node_put(np);
+
+ devinfo = devm_kzalloc(dev, sizeof(*devinfo), GFP_KERNEL);
+ if (!devinfo)
+ return -ENOMEM;
+
+ devinfo->dev = dev;
+
+ platform_set_drvdata(pdev, devinfo);
+
+ /* Check PM API version number */
+ ret = zynqmp_pm_get_api_version(&pm_api_version);
+ if (ret)
+ return ret;
+
+ if (pm_api_version < ZYNQMP_PM_VERSION) {
+ panic("%s Platform Management API version error. Expected: v%d.%d - Found: v%d.%d\n",
+ __func__,
+ ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR,
+ pm_api_version >> 16, pm_api_version & 0xFFFF);
+ }
+
+ pr_info("%s Platform Management API v%d.%d\n", __func__,
+ pm_api_version >> 16, pm_api_version & 0xFFFF);
+
+ /* Check trustzone version number */
+ ret = zynqmp_pm_get_trustzone_version(&pm_tz_version);
+ if (ret)
+ panic("Legacy trustzone found without version support\n");
+
+ if (pm_tz_version < ZYNQMP_TZ_VERSION)
+ panic("%s Trustzone version error. Expected: v%d.%d - Found: v%d.%d\n",
+ __func__,
+ ZYNQMP_TZ_VERSION_MAJOR, ZYNQMP_TZ_VERSION_MINOR,
+ pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+
+ pr_info("%s Trustzone version v%d.%d\n", __func__,
+ pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+
+ ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
+ ARRAY_SIZE(firmware_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret);
+ return ret;
+ }
+
+ zynqmp_pm_api_debugfs_init();
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
+ if (np) {
+ em_dev = platform_device_register_data(&pdev->dev, "xlnx_event_manager",
+ -1, NULL, 0);
+ if (IS_ERR(em_dev))
+ dev_err_probe(&pdev->dev, PTR_ERR(em_dev), "EM register fail with error\n");
+ }
+ of_node_put(np);
+
+ return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+
+static int zynqmp_firmware_remove(struct platform_device *pdev)
+{
+ struct pm_api_feature_data *feature_data;
+ struct hlist_node *tmp;
+ int i;
+
+ mfd_remove_devices(&pdev->dev);
+ zynqmp_pm_api_debugfs_exit();
+
+ hash_for_each_safe(pm_api_features_map, i, tmp, feature_data, hentry) {
+ hash_del(&feature_data->hentry);
+ kfree(feature_data);
+ }
+
+ platform_device_unregister(em_dev);
+
+ return 0;
+}
+
+static const struct of_device_id zynqmp_firmware_of_match[] = {
+ {.compatible = "xlnx,zynqmp-firmware"},
+ {.compatible = "xlnx,versal-firmware"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match);
+
+static struct platform_driver zynqmp_firmware_driver = {
+ .driver = {
+ .name = "zynqmp_firmware",
+ .of_match_table = zynqmp_firmware_of_match,
+ .dev_groups = zynqmp_firmware_groups,
+ },
+ .probe = zynqmp_firmware_probe,
+ .remove = zynqmp_firmware_remove,
+};
+module_platform_driver(zynqmp_firmware_driver);