diff options
Diffstat (limited to 'drivers/fsi/cf-fsi-fw.h')
| -rw-r--r-- | drivers/fsi/cf-fsi-fw.h | 157 |
1 files changed, 157 insertions, 0 deletions
diff --git a/drivers/fsi/cf-fsi-fw.h b/drivers/fsi/cf-fsi-fw.h new file mode 100644 index 000000000..1118eaf7e --- /dev/null +++ b/drivers/fsi/cf-fsi-fw.h @@ -0,0 +1,157 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __CF_FSI_FW_H +#define __CF_FSI_FW_H + +/* + * uCode file layout + * + * 0000...03ff : m68k exception vectors + * 0400...04ff : Header info & boot config block + * 0500....... : Code & stack + */ + +/* + * Header info & boot config area + * + * The Header info is built into the ucode and provide version and + * platform information. + * + * the Boot config needs to be adjusted by the ARM prior to starting + * the ucode if the Command/Status area isn't at 0x320000 in CF space + * (ie. beginning of SRAM). + */ + +#define HDR_OFFSET 0x400 + +/* Info: Signature & version */ +#define HDR_SYS_SIG 0x00 /* 2 bytes system signature */ +#define SYS_SIG_SHARED 0x5348 +#define SYS_SIG_SPLIT 0x5350 +#define HDR_FW_VERS 0x02 /* 2 bytes Major.Minor */ +#define HDR_API_VERS 0x04 /* 2 bytes Major.Minor */ +#define API_VERSION_MAJ 2 /* Current version */ +#define API_VERSION_MIN 1 +#define HDR_FW_OPTIONS 0x08 /* 4 bytes option flags */ +#define FW_OPTION_TRACE_EN 0x00000001 /* FW tracing enabled */ +#define FW_OPTION_CONT_CLOCK 0x00000002 /* Continuous clocking supported */ +#define HDR_FW_SIZE 0x10 /* 4 bytes size for combo image */ + +/* Boot Config: Address of Command/Status area */ +#define HDR_CMD_STAT_AREA 0x80 /* 4 bytes CF address */ +#define HDR_FW_CONTROL 0x84 /* 4 bytes control flags */ +#define FW_CONTROL_CONT_CLOCK 0x00000002 /* Continuous clocking enabled */ +#define FW_CONTROL_DUMMY_RD 0x00000004 /* Extra dummy read (AST2400) */ +#define FW_CONTROL_USE_STOP 0x00000008 /* Use STOP instructions */ +#define HDR_CLOCK_GPIO_VADDR 0x90 /* 2 bytes offset from GPIO base */ +#define HDR_CLOCK_GPIO_DADDR 0x92 /* 2 bytes offset from GPIO base */ +#define HDR_DATA_GPIO_VADDR 0x94 /* 2 bytes offset from GPIO base */ +#define HDR_DATA_GPIO_DADDR 0x96 /* 2 bytes offset from GPIO base */ +#define HDR_TRANS_GPIO_VADDR 0x98 /* 2 bytes offset from GPIO base */ +#define HDR_TRANS_GPIO_DADDR 0x9a /* 2 bytes offset from GPIO base */ +#define HDR_CLOCK_GPIO_BIT 0x9c /* 1 byte bit number */ +#define HDR_DATA_GPIO_BIT 0x9d /* 1 byte bit number */ +#define HDR_TRANS_GPIO_BIT 0x9e /* 1 byte bit number */ + +/* + * Command/Status area layout: Main part + */ + +/* Command/Status register: + * + * +---------------------------+ + * | STAT | RLEN | CLEN | CMD | + * | 8 | 8 | 8 | 8 | + * +---------------------------+ + * | | | | + * status | | | + * Response len | | + * (in bits) | | + * | | + * Command len | + * (in bits) | + * | + * Command code + * + * Due to the big endian layout, that means that a byte read will + * return the status byte + */ +#define CMD_STAT_REG 0x00 +#define CMD_REG_CMD_MASK 0x000000ff +#define CMD_REG_CMD_SHIFT 0 +#define CMD_NONE 0x00 +#define CMD_COMMAND 0x01 +#define CMD_BREAK 0x02 +#define CMD_IDLE_CLOCKS 0x03 /* clen = #clocks */ +#define CMD_INVALID 0xff +#define CMD_REG_CLEN_MASK 0x0000ff00 +#define CMD_REG_CLEN_SHIFT 8 +#define CMD_REG_RLEN_MASK 0x00ff0000 +#define CMD_REG_RLEN_SHIFT 16 +#define CMD_REG_STAT_MASK 0xff000000 +#define CMD_REG_STAT_SHIFT 24 +#define STAT_WORKING 0x00 +#define STAT_COMPLETE 0x01 +#define STAT_ERR_INVAL_CMD 0x80 +#define STAT_ERR_INVAL_IRQ 0x81 +#define STAT_ERR_MTOE 0x82 + +/* Response tag & CRC */ +#define STAT_RTAG 0x04 + +/* Response CRC */ +#define STAT_RCRC 0x05 + +/* Echo and Send delay */ +#define ECHO_DLY_REG 0x08 +#define SEND_DLY_REG 0x09 + +/* Command data area + * + * Last byte of message must be left aligned + */ +#define CMD_DATA 0x10 /* 64 bit of data */ + +/* Response data area, right aligned, unused top bits are 1 */ +#define RSP_DATA 0x20 /* 32 bit of data */ + +/* Misc */ +#define INT_CNT 0x30 /* 32-bit interrupt count */ +#define BAD_INT_VEC 0x34 /* 32-bit bad interrupt vector # */ +#define CF_STARTED 0x38 /* byte, set to -1 when copro started */ +#define CLK_CNT 0x3c /* 32-bit, clock count (debug only) */ + +/* + * SRAM layout: GPIO arbitration part + */ +#define ARB_REG 0x40 +#define ARB_ARM_REQ 0x01 +#define ARB_ARM_ACK 0x02 + +/* Misc2 */ +#define CF_RESET_D0 0x50 +#define CF_RESET_D1 0x54 +#define BAD_INT_S0 0x58 +#define BAD_INT_S1 0x5c +#define STOP_CNT 0x60 + +/* Internal */ + +/* + * SRAM layout: Trace buffer (debug builds only) + */ +#define TRACEBUF 0x100 +#define TR_CLKOBIT0 0xc0 +#define TR_CLKOBIT1 0xc1 +#define TR_CLKOSTART 0x82 +#define TR_OLEN 0x83 /* + len */ +#define TR_CLKZ 0x84 /* + count */ +#define TR_CLKWSTART 0x85 +#define TR_CLKTAG 0x86 /* + tag */ +#define TR_CLKDATA 0x87 /* + len */ +#define TR_CLKCRC 0x88 /* + raw crc */ +#define TR_CLKIBIT0 0x90 +#define TR_CLKIBIT1 0x91 +#define TR_END 0xff + +#endif /* __CF_FSI_FW_H */ + |