diff options
Diffstat (limited to 'drivers/gpu/ipu-v3/ipu-image-convert.c')
| -rw-r--r-- | drivers/gpu/ipu-v3/ipu-image-convert.c | 2509 |
1 files changed, 2509 insertions, 0 deletions
diff --git a/drivers/gpu/ipu-v3/ipu-image-convert.c b/drivers/gpu/ipu-v3/ipu-image-convert.c new file mode 100644 index 000000000..af1612044 --- /dev/null +++ b/drivers/gpu/ipu-v3/ipu-image-convert.c @@ -0,0 +1,2509 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2012-2016 Mentor Graphics Inc. + * + * Queued image conversion support, with tiling and rotation. + */ + +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <video/imx-ipu-image-convert.h> +#include "ipu-prv.h" + +/* + * The IC Resizer has a restriction that the output frame from the + * resizer must be 1024 or less in both width (pixels) and height + * (lines). + * + * The image converter attempts to split up a conversion when + * the desired output (converted) frame resolution exceeds the + * IC resizer limit of 1024 in either dimension. + * + * If either dimension of the output frame exceeds the limit, the + * dimension is split into 1, 2, or 4 equal stripes, for a maximum + * of 4*4 or 16 tiles. A conversion is then carried out for each + * tile (but taking care to pass the full frame stride length to + * the DMA channel's parameter memory!). IDMA double-buffering is used + * to convert each tile back-to-back when possible (see note below + * when double_buffering boolean is set). + * + * Note that the input frame must be split up into the same number + * of tiles as the output frame: + * + * +---------+-----+ + * +-----+---+ | A | B | + * | A | B | | | | + * +-----+---+ --> +---------+-----+ + * | C | D | | C | D | + * +-----+---+ | | | + * +---------+-----+ + * + * Clockwise 90° rotations are handled by first rescaling into a + * reusable temporary tile buffer and then rotating with the 8x8 + * block rotator, writing to the correct destination: + * + * +-----+-----+ + * | | | + * +-----+---+ +---------+ | C | A | + * | A | B | | A,B, | | | | | + * +-----+---+ --> | C,D | | --> | | | + * | C | D | +---------+ +-----+-----+ + * +-----+---+ | D | B | + * | | | + * +-----+-----+ + * + * If the 8x8 block rotator is used, horizontal or vertical flipping + * is done during the rotation step, otherwise flipping is done + * during the scaling step. + * With rotation or flipping, tile order changes between input and + * output image. Tiles are numbered row major from top left to bottom + * right for both input and output image. + */ + +#define MAX_STRIPES_W 4 +#define MAX_STRIPES_H 4 +#define MAX_TILES (MAX_STRIPES_W * MAX_STRIPES_H) + +#define MIN_W 16 +#define MIN_H 8 +#define MAX_W 4096 +#define MAX_H 4096 + +enum ipu_image_convert_type { + IMAGE_CONVERT_IN = 0, + IMAGE_CONVERT_OUT, +}; + +struct ipu_image_convert_dma_buf { + void *virt; + dma_addr_t phys; + unsigned long len; +}; + +struct ipu_image_convert_dma_chan { + int in; + int out; + int rot_in; + int rot_out; + int vdi_in_p; + int vdi_in; + int vdi_in_n; +}; + +/* dimensions of one tile */ +struct ipu_image_tile { + u32 width; + u32 height; + u32 left; + u32 top; + /* size and strides are in bytes */ + u32 size; + u32 stride; + u32 rot_stride; + /* start Y or packed offset of this tile */ + u32 offset; + /* offset from start to tile in U plane, for planar formats */ + u32 u_off; + /* offset from start to tile in V plane, for planar formats */ + u32 v_off; +}; + +struct ipu_image_convert_image { + struct ipu_image base; + enum ipu_image_convert_type type; + + const struct ipu_image_pixfmt *fmt; + unsigned int stride; + + /* # of rows (horizontal stripes) if dest height is > 1024 */ + unsigned int num_rows; + /* # of columns (vertical stripes) if dest width is > 1024 */ + unsigned int num_cols; + + struct ipu_image_tile tile[MAX_TILES]; +}; + +struct ipu_image_pixfmt { + u32 fourcc; /* V4L2 fourcc */ + int bpp; /* total bpp */ + int uv_width_dec; /* decimation in width for U/V planes */ + int uv_height_dec; /* decimation in height for U/V planes */ + bool planar; /* planar format */ + bool uv_swapped; /* U and V planes are swapped */ + bool uv_packed; /* partial planar (U and V in same plane) */ +}; + +struct ipu_image_convert_ctx; +struct ipu_image_convert_chan; +struct ipu_image_convert_priv; + +enum eof_irq_mask { + EOF_IRQ_IN = BIT(0), + EOF_IRQ_ROT_IN = BIT(1), + EOF_IRQ_OUT = BIT(2), + EOF_IRQ_ROT_OUT = BIT(3), +}; + +#define EOF_IRQ_COMPLETE (EOF_IRQ_IN | EOF_IRQ_OUT) +#define EOF_IRQ_ROT_COMPLETE (EOF_IRQ_IN | EOF_IRQ_OUT | \ + EOF_IRQ_ROT_IN | EOF_IRQ_ROT_OUT) + +struct ipu_image_convert_ctx { + struct ipu_image_convert_chan *chan; + + ipu_image_convert_cb_t complete; + void *complete_context; + + /* Source/destination image data and rotation mode */ + struct ipu_image_convert_image in; + struct ipu_image_convert_image out; + struct ipu_ic_csc csc; + enum ipu_rotate_mode rot_mode; + u32 downsize_coeff_h; + u32 downsize_coeff_v; + u32 image_resize_coeff_h; + u32 image_resize_coeff_v; + u32 resize_coeffs_h[MAX_STRIPES_W]; + u32 resize_coeffs_v[MAX_STRIPES_H]; + + /* intermediate buffer for rotation */ + struct ipu_image_convert_dma_buf rot_intermediate[2]; + + /* current buffer number for double buffering */ + int cur_buf_num; + + bool aborting; + struct completion aborted; + + /* can we use double-buffering for this conversion operation? */ + bool double_buffering; + /* num_rows * num_cols */ + unsigned int num_tiles; + /* next tile to process */ + unsigned int next_tile; + /* where to place converted tile in dest image */ + unsigned int out_tile_map[MAX_TILES]; + + /* mask of completed EOF irqs at every tile conversion */ + enum eof_irq_mask eof_mask; + + struct list_head list; +}; + +struct ipu_image_convert_chan { + struct ipu_image_convert_priv *priv; + + enum ipu_ic_task ic_task; + const struct ipu_image_convert_dma_chan *dma_ch; + + struct ipu_ic *ic; + struct ipuv3_channel *in_chan; + struct ipuv3_channel *out_chan; + struct ipuv3_channel *rotation_in_chan; + struct ipuv3_channel *rotation_out_chan; + + /* the IPU end-of-frame irqs */ + int in_eof_irq; + int rot_in_eof_irq; + int out_eof_irq; + int rot_out_eof_irq; + + spinlock_t irqlock; + + /* list of convert contexts */ + struct list_head ctx_list; + /* queue of conversion runs */ + struct list_head pending_q; + /* queue of completed runs */ + struct list_head done_q; + + /* the current conversion run */ + struct ipu_image_convert_run *current_run; +}; + +struct ipu_image_convert_priv { + struct ipu_image_convert_chan chan[IC_NUM_TASKS]; + struct ipu_soc *ipu; +}; + +static const struct ipu_image_convert_dma_chan +image_convert_dma_chan[IC_NUM_TASKS] = { + [IC_TASK_VIEWFINDER] = { + .in = IPUV3_CHANNEL_MEM_IC_PRP_VF, + .out = IPUV3_CHANNEL_IC_PRP_VF_MEM, + .rot_in = IPUV3_CHANNEL_MEM_ROT_VF, + .rot_out = IPUV3_CHANNEL_ROT_VF_MEM, + .vdi_in_p = IPUV3_CHANNEL_MEM_VDI_PREV, + .vdi_in = IPUV3_CHANNEL_MEM_VDI_CUR, + .vdi_in_n = IPUV3_CHANNEL_MEM_VDI_NEXT, + }, + [IC_TASK_POST_PROCESSOR] = { + .in = IPUV3_CHANNEL_MEM_IC_PP, + .out = IPUV3_CHANNEL_IC_PP_MEM, + .rot_in = IPUV3_CHANNEL_MEM_ROT_PP, + .rot_out = IPUV3_CHANNEL_ROT_PP_MEM, + }, +}; + +static const struct ipu_image_pixfmt image_convert_formats[] = { + { + .fourcc = V4L2_PIX_FMT_RGB565, + .bpp = 16, + }, { + .fourcc = V4L2_PIX_FMT_RGB24, + .bpp = 24, + }, { + .fourcc = V4L2_PIX_FMT_BGR24, + .bpp = 24, + }, { + .fourcc = V4L2_PIX_FMT_RGB32, + .bpp = 32, + }, { + .fourcc = V4L2_PIX_FMT_BGR32, + .bpp = 32, + }, { + .fourcc = V4L2_PIX_FMT_XRGB32, + .bpp = 32, + }, { + .fourcc = V4L2_PIX_FMT_XBGR32, + .bpp = 32, + }, { + .fourcc = V4L2_PIX_FMT_BGRX32, + .bpp = 32, + }, { + .fourcc = V4L2_PIX_FMT_RGBX32, + .bpp = 32, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .bpp = 16, + .uv_width_dec = 2, + .uv_height_dec = 1, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, + .bpp = 16, + .uv_width_dec = 2, + .uv_height_dec = 1, + }, { + .fourcc = V4L2_PIX_FMT_YUV420, + .bpp = 12, + .planar = true, + .uv_width_dec = 2, + .uv_height_dec = 2, + }, { + .fourcc = V4L2_PIX_FMT_YVU420, + .bpp = 12, + .planar = true, + .uv_width_dec = 2, + .uv_height_dec = 2, + .uv_swapped = true, + }, { + .fourcc = V4L2_PIX_FMT_NV12, + .bpp = 12, + .planar = true, + .uv_width_dec = 2, + .uv_height_dec = 2, + .uv_packed = true, + }, { + .fourcc = V4L2_PIX_FMT_YUV422P, + .bpp = 16, + .planar = true, + .uv_width_dec = 2, + .uv_height_dec = 1, + }, { + .fourcc = V4L2_PIX_FMT_NV16, + .bpp = 16, + .planar = true, + .uv_width_dec = 2, + .uv_height_dec = 1, + .uv_packed = true, + }, +}; + +static const struct ipu_image_pixfmt *get_format(u32 fourcc) +{ + const struct ipu_image_pixfmt *ret = NULL; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(image_convert_formats); i++) { + if (image_convert_formats[i].fourcc == fourcc) { + ret = &image_convert_formats[i]; + break; + } + } + + return ret; +} + +static void dump_format(struct ipu_image_convert_ctx *ctx, + struct ipu_image_convert_image *ic_image) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + + dev_dbg(priv->ipu->dev, + "task %u: ctx %p: %s format: %dx%d (%dx%d tiles), %c%c%c%c\n", + chan->ic_task, ctx, + ic_image->type == IMAGE_CONVERT_OUT ? "Output" : "Input", + ic_image->base.pix.width, ic_image->base.pix.height, + ic_image->num_cols, ic_image->num_rows, + ic_image->fmt->fourcc & 0xff, + (ic_image->fmt->fourcc >> 8) & 0xff, + (ic_image->fmt->fourcc >> 16) & 0xff, + (ic_image->fmt->fourcc >> 24) & 0xff); +} + +int ipu_image_convert_enum_format(int index, u32 *fourcc) +{ + const struct ipu_image_pixfmt *fmt; + + if (index >= (int)ARRAY_SIZE(image_convert_formats)) + return -EINVAL; + + /* Format found */ + fmt = &image_convert_formats[index]; + *fourcc = fmt->fourcc; + return 0; +} +EXPORT_SYMBOL_GPL(ipu_image_convert_enum_format); + +static void free_dma_buf(struct ipu_image_convert_priv *priv, + struct ipu_image_convert_dma_buf *buf) +{ + if (buf->virt) + dma_free_coherent(priv->ipu->dev, + buf->len, buf->virt, buf->phys); + buf->virt = NULL; + buf->phys = 0; +} + +static int alloc_dma_buf(struct ipu_image_convert_priv *priv, + struct ipu_image_convert_dma_buf *buf, + int size) +{ + buf->len = PAGE_ALIGN(size); + buf->virt = dma_alloc_coherent(priv->ipu->dev, buf->len, &buf->phys, + GFP_DMA | GFP_KERNEL); + if (!buf->virt) { + dev_err(priv->ipu->dev, "failed to alloc dma buffer\n"); + return -ENOMEM; + } + + return 0; +} + +static inline int num_stripes(int dim) +{ + return (dim - 1) / 1024 + 1; +} + +/* + * Calculate downsizing coefficients, which are the same for all tiles, + * and initial bilinear resizing coefficients, which are used to find the + * best seam positions. + * Also determine the number of tiles necessary to guarantee that no tile + * is larger than 1024 pixels in either dimension at the output and between + * IC downsizing and main processing sections. + */ +static int calc_image_resize_coefficients(struct ipu_image_convert_ctx *ctx, + struct ipu_image *in, + struct ipu_image *out) +{ + u32 downsized_width = in->rect.width; + u32 downsized_height = in->rect.height; + u32 downsize_coeff_v = 0; + u32 downsize_coeff_h = 0; + u32 resized_width = out->rect.width; + u32 resized_height = out->rect.height; + u32 resize_coeff_h; + u32 resize_coeff_v; + u32 cols; + u32 rows; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + resized_width = out->rect.height; + resized_height = out->rect.width; + } + + /* Do not let invalid input lead to an endless loop below */ + if (WARN_ON(resized_width == 0 || resized_height == 0)) + return -EINVAL; + + while (downsized_width >= resized_width * 2) { + downsized_width >>= 1; + downsize_coeff_h++; + } + + while (downsized_height >= resized_height * 2) { + downsized_height >>= 1; + downsize_coeff_v++; + } + + /* + * Calculate the bilinear resizing coefficients that could be used if + * we were converting with a single tile. The bottom right output pixel + * should sample as close as possible to the bottom right input pixel + * out of the decimator, but not overshoot it: + */ + resize_coeff_h = 8192 * (downsized_width - 1) / (resized_width - 1); + resize_coeff_v = 8192 * (downsized_height - 1) / (resized_height - 1); + + /* + * Both the output of the IC downsizing section before being passed to + * the IC main processing section and the final output of the IC main + * processing section must be <= 1024 pixels in both dimensions. + */ + cols = num_stripes(max_t(u32, downsized_width, resized_width)); + rows = num_stripes(max_t(u32, downsized_height, resized_height)); + + dev_dbg(ctx->chan->priv->ipu->dev, + "%s: hscale: >>%u, *8192/%u vscale: >>%u, *8192/%u, %ux%u tiles\n", + __func__, downsize_coeff_h, resize_coeff_h, downsize_coeff_v, + resize_coeff_v, cols, rows); + + if (downsize_coeff_h > 2 || downsize_coeff_v > 2 || + resize_coeff_h > 0x3fff || resize_coeff_v > 0x3fff) + return -EINVAL; + + ctx->downsize_coeff_h = downsize_coeff_h; + ctx->downsize_coeff_v = downsize_coeff_v; + ctx->image_resize_coeff_h = resize_coeff_h; + ctx->image_resize_coeff_v = resize_coeff_v; + ctx->in.num_cols = cols; + ctx->in.num_rows = rows; + + return 0; +} + +#define round_closest(x, y) round_down((x) + (y)/2, (y)) + +/* + * Find the best aligned seam position for the given column / row index. + * Rotation and image offsets are out of scope. + * + * @index: column / row index, used to calculate valid interval + * @in_edge: input right / bottom edge + * @out_edge: output right / bottom edge + * @in_align: input alignment, either horizontal 8-byte line start address + * alignment, or pixel alignment due to image format + * @out_align: output alignment, either horizontal 8-byte line start address + * alignment, or pixel alignment due to image format or rotator + * block size + * @in_burst: horizontal input burst size in case of horizontal flip + * @out_burst: horizontal output burst size or rotator block size + * @downsize_coeff: downsizing section coefficient + * @resize_coeff: main processing section resizing coefficient + * @_in_seam: aligned input seam position return value + * @_out_seam: aligned output seam position return value + */ +static void find_best_seam(struct ipu_image_convert_ctx *ctx, + unsigned int index, + unsigned int in_edge, + unsigned int out_edge, + unsigned int in_align, + unsigned int out_align, + unsigned int in_burst, + unsigned int out_burst, + unsigned int downsize_coeff, + unsigned int resize_coeff, + u32 *_in_seam, + u32 *_out_seam) +{ + struct device *dev = ctx->chan->priv->ipu->dev; + unsigned int out_pos; + /* Input / output seam position candidates */ + unsigned int out_seam = 0; + unsigned int in_seam = 0; + unsigned int min_diff = UINT_MAX; + unsigned int out_start; + unsigned int out_end; + unsigned int in_start; + unsigned int in_end; + + /* Start within 1024 pixels of the right / bottom edge */ + out_start = max_t(int, index * out_align, out_edge - 1024); + /* End before having to add more columns to the left / rows above */ + out_end = min_t(unsigned int, out_edge, index * 1024 + 1); + + /* + * Limit input seam position to make sure that the downsized input tile + * to the right or bottom does not exceed 1024 pixels. + */ + in_start = max_t(int, index * in_align, + in_edge - (1024 << downsize_coeff)); + in_end = min_t(unsigned int, in_edge, + index * (1024 << downsize_coeff) + 1); + + /* + * Output tiles must start at a multiple of 8 bytes horizontally and + * possibly at an even line horizontally depending on the pixel format. + * Only consider output aligned positions for the seam. + */ + out_start = round_up(out_start, out_align); + for (out_pos = out_start; out_pos < out_end; out_pos += out_align) { + unsigned int in_pos; + unsigned int in_pos_aligned; + unsigned int in_pos_rounded; + unsigned int abs_diff; + + /* + * Tiles in the right row / bottom column may not be allowed to + * overshoot horizontally / vertically. out_burst may be the + * actual DMA burst size, or the rotator block size. + */ + if ((out_burst > 1) && (out_edge - out_pos) % out_burst) + continue; + + /* + * Input sample position, corresponding to out_pos, 19.13 fixed + * point. + */ + in_pos = (out_pos * resize_coeff) << downsize_coeff; + /* + * The closest input sample position that we could actually + * start the input tile at, 19.13 fixed point. + */ + in_pos_aligned = round_closest(in_pos, 8192U * in_align); + /* Convert 19.13 fixed point to integer */ + in_pos_rounded = in_pos_aligned / 8192U; + + if (in_pos_rounded < in_start) + continue; + if (in_pos_rounded >= in_end) + break; + + if ((in_burst > 1) && + (in_edge - in_pos_rounded) % in_burst) + continue; + + if (in_pos < in_pos_aligned) + abs_diff = in_pos_aligned - in_pos; + else + abs_diff = in_pos - in_pos_aligned; + + if (abs_diff < min_diff) { + in_seam = in_pos_rounded; + out_seam = out_pos; + min_diff = abs_diff; + } + } + + *_out_seam = out_seam; + *_in_seam = in_seam; + + dev_dbg(dev, "%s: out_seam %u(%u) in [%u, %u], in_seam %u(%u) in [%u, %u] diff %u.%03u\n", + __func__, out_seam, out_align, out_start, out_end, + in_seam, in_align, in_start, in_end, min_diff / 8192, + DIV_ROUND_CLOSEST(min_diff % 8192 * 1000, 8192)); +} + +/* + * Tile left edges are required to be aligned to multiples of 8 bytes + * by the IDMAC. + */ +static inline u32 tile_left_align(const struct ipu_image_pixfmt *fmt) +{ + if (fmt->planar) + return fmt->uv_packed ? 8 : 8 * fmt->uv_width_dec; + else + return fmt->bpp == 32 ? 2 : fmt->bpp == 16 ? 4 : 8; +} + +/* + * Tile top edge alignment is only limited by chroma subsampling. + */ +static inline u32 tile_top_align(const struct ipu_image_pixfmt *fmt) +{ + return fmt->uv_height_dec > 1 ? 2 : 1; +} + +static inline u32 tile_width_align(enum ipu_image_convert_type type, + const struct ipu_image_pixfmt *fmt, + enum ipu_rotate_mode rot_mode) +{ + if (type == IMAGE_CONVERT_IN) { + /* + * The IC burst reads 8 pixels at a time. Reading beyond the + * end of the line is usually acceptable. Those pixels are + * ignored, unless the IC has to write the scaled line in + * reverse. + */ + return (!ipu_rot_mode_is_irt(rot_mode) && + (rot_mode & IPU_ROT_BIT_HFLIP)) ? 8 : 2; + } + + /* + * Align to 16x16 pixel blocks for planar 4:2:0 chroma subsampled + * formats to guarantee 8-byte aligned line start addresses in the + * chroma planes when IRT is used. Align to 8x8 pixel IRT block size + * for all other formats. + */ + return (ipu_rot_mode_is_irt(rot_mode) && + fmt->planar && !fmt->uv_packed) ? + 8 * fmt->uv_width_dec : 8; +} + +static inline u32 tile_height_align(enum ipu_image_convert_type type, + const struct ipu_image_pixfmt *fmt, + enum ipu_rotate_mode rot_mode) +{ + if (type == IMAGE_CONVERT_IN || !ipu_rot_mode_is_irt(rot_mode)) + return 2; + + /* + * Align to 16x16 pixel blocks for planar 4:2:0 chroma subsampled + * formats to guarantee 8-byte aligned line start addresses in the + * chroma planes when IRT is used. Align to 8x8 pixel IRT block size + * for all other formats. + */ + return (fmt->planar && !fmt->uv_packed) ? 8 * fmt->uv_width_dec : 8; +} + +/* + * Fill in left position and width and for all tiles in an input column, and + * for all corresponding output tiles. If the 90° rotator is used, the output + * tiles are in a row, and output tile top position and height are set. + */ +static void fill_tile_column(struct ipu_image_convert_ctx *ctx, + unsigned int col, + struct ipu_image_convert_image *in, + unsigned int in_left, unsigned int in_width, + struct ipu_image_convert_image *out, + unsigned int out_left, unsigned int out_width) +{ + unsigned int row, tile_idx; + struct ipu_image_tile *in_tile, *out_tile; + + for (row = 0; row < in->num_rows; row++) { + tile_idx = in->num_cols * row + col; + in_tile = &in->tile[tile_idx]; + out_tile = &out->tile[ctx->out_tile_map[tile_idx]]; + + in_tile->left = in_left; + in_tile->width = in_width; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + out_tile->top = out_left; + out_tile->height = out_width; + } else { + out_tile->left = out_left; + out_tile->width = out_width; + } + } +} + +/* + * Fill in top position and height and for all tiles in an input row, and + * for all corresponding output tiles. If the 90° rotator is used, the output + * tiles are in a column, and output tile left position and width are set. + */ +static void fill_tile_row(struct ipu_image_convert_ctx *ctx, unsigned int row, + struct ipu_image_convert_image *in, + unsigned int in_top, unsigned int in_height, + struct ipu_image_convert_image *out, + unsigned int out_top, unsigned int out_height) +{ + unsigned int col, tile_idx; + struct ipu_image_tile *in_tile, *out_tile; + + for (col = 0; col < in->num_cols; col++) { + tile_idx = in->num_cols * row + col; + in_tile = &in->tile[tile_idx]; + out_tile = &out->tile[ctx->out_tile_map[tile_idx]]; + + in_tile->top = in_top; + in_tile->height = in_height; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + out_tile->left = out_top; + out_tile->width = out_height; + } else { + out_tile->top = out_top; + out_tile->height = out_height; + } + } +} + +/* + * Find the best horizontal and vertical seam positions to split into tiles. + * Minimize the fractional part of the input sampling position for the + * top / left pixels of each tile. + */ +static void find_seams(struct ipu_image_convert_ctx *ctx, + struct ipu_image_convert_image *in, + struct ipu_image_convert_image *out) +{ + struct device *dev = ctx->chan->priv->ipu->dev; + unsigned int resized_width = out->base.rect.width; + unsigned int resized_height = out->base.rect.height; + unsigned int col; + unsigned int row; + unsigned int in_left_align = tile_left_align(in->fmt); + unsigned int in_top_align = tile_top_align(in->fmt); + unsigned int out_left_align = tile_left_align(out->fmt); + unsigned int out_top_align = tile_top_align(out->fmt); + unsigned int out_width_align = tile_width_align(out->type, out->fmt, + ctx->rot_mode); + unsigned int out_height_align = tile_height_align(out->type, out->fmt, + ctx->rot_mode); + unsigned int in_right = in->base.rect.width; + unsigned int in_bottom = in->base.rect.height; + unsigned int out_right = out->base.rect.width; + unsigned int out_bottom = out->base.rect.height; + unsigned int flipped_out_left; + unsigned int flipped_out_top; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + /* Switch width/height and align top left to IRT block size */ + resized_width = out->base.rect.height; + resized_height = out->base.rect.width; + out_left_align = out_height_align; + out_top_align = out_width_align; + out_width_align = out_left_align; + out_height_align = out_top_align; + out_right = out->base.rect.height; + out_bottom = out->base.rect.width; + } + + for (col = in->num_cols - 1; col > 0; col--) { + bool allow_in_overshoot = ipu_rot_mode_is_irt(ctx->rot_mode) || + !(ctx->rot_mode & IPU_ROT_BIT_HFLIP); + bool allow_out_overshoot = (col < in->num_cols - 1) && + !(ctx->rot_mode & IPU_ROT_BIT_HFLIP); + unsigned int in_left; + unsigned int out_left; + + /* + * Align input width to burst length if the scaling step flips + * horizontally. + */ + + find_best_seam(ctx, col, + in_right, out_right, + in_left_align, out_left_align, + allow_in_overshoot ? 1 : 8 /* burst length */, + allow_out_overshoot ? 1 : out_width_align, + ctx->downsize_coeff_h, ctx->image_resize_coeff_h, + &in_left, &out_left); + + if (ctx->rot_mode & IPU_ROT_BIT_HFLIP) + flipped_out_left = resized_width - out_right; + else + flipped_out_left = out_left; + + fill_tile_column(ctx, col, in, in_left, in_right - in_left, + out, flipped_out_left, out_right - out_left); + + dev_dbg(dev, "%s: col %u: %u, %u -> %u, %u\n", __func__, col, + in_left, in_right - in_left, + flipped_out_left, out_right - out_left); + + in_right = in_left; + out_right = out_left; + } + + flipped_out_left = (ctx->rot_mode & IPU_ROT_BIT_HFLIP) ? + resized_width - out_right : 0; + + fill_tile_column(ctx, 0, in, 0, in_right, + out, flipped_out_left, out_right); + + dev_dbg(dev, "%s: col 0: 0, %u -> %u, %u\n", __func__, + in_right, flipped_out_left, out_right); + + for (row = in->num_rows - 1; row > 0; row--) { + bool allow_overshoot = row < in->num_rows - 1; + unsigned int in_top; + unsigned int out_top; + + find_best_seam(ctx, row, + in_bottom, out_bottom, + in_top_align, out_top_align, + 1, allow_overshoot ? 1 : out_height_align, + ctx->downsize_coeff_v, ctx->image_resize_coeff_v, + &in_top, &out_top); + + if ((ctx->rot_mode & IPU_ROT_BIT_VFLIP) ^ + ipu_rot_mode_is_irt(ctx->rot_mode)) + flipped_out_top = resized_height - out_bottom; + else + flipped_out_top = out_top; + + fill_tile_row(ctx, row, in, in_top, in_bottom - in_top, + out, flipped_out_top, out_bottom - out_top); + + dev_dbg(dev, "%s: row %u: %u, %u -> %u, %u\n", __func__, row, + in_top, in_bottom - in_top, + flipped_out_top, out_bottom - out_top); + + in_bottom = in_top; + out_bottom = out_top; + } + + if ((ctx->rot_mode & IPU_ROT_BIT_VFLIP) ^ + ipu_rot_mode_is_irt(ctx->rot_mode)) + flipped_out_top = resized_height - out_bottom; + else + flipped_out_top = 0; + + fill_tile_row(ctx, 0, in, 0, in_bottom, + out, flipped_out_top, out_bottom); + + dev_dbg(dev, "%s: row 0: 0, %u -> %u, %u\n", __func__, + in_bottom, flipped_out_top, out_bottom); +} + +static int calc_tile_dimensions(struct ipu_image_convert_ctx *ctx, + struct ipu_image_convert_image *image) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + unsigned int max_width = 1024; + unsigned int max_height = 1024; + unsigned int i; + + if (image->type == IMAGE_CONVERT_IN) { + /* Up to 4096x4096 input tile size */ + max_width <<= ctx->downsize_coeff_h; + max_height <<= ctx->downsize_coeff_v; + } + + for (i = 0; i < ctx->num_tiles; i++) { + struct ipu_image_tile *tile; + const unsigned int row = i / image->num_cols; + const unsigned int col = i % image->num_cols; + + if (image->type == IMAGE_CONVERT_OUT) + tile = &image->tile[ctx->out_tile_map[i]]; + else + tile = &image->tile[i]; + + tile->size = ((tile->height * image->fmt->bpp) >> 3) * + tile->width; + + if (image->fmt->planar) { + tile->stride = tile->width; + tile->rot_stride = tile->height; + } else { + tile->stride = + (image->fmt->bpp * tile->width) >> 3; + tile->rot_stride = + (image->fmt->bpp * tile->height) >> 3; + } + + dev_dbg(priv->ipu->dev, + "task %u: ctx %p: %s@[%u,%u]: %ux%u@%u,%u\n", + chan->ic_task, ctx, + image->type == IMAGE_CONVERT_IN ? "Input" : "Output", + row, col, + tile->width, tile->height, tile->left, tile->top); + + if (!tile->width || tile->width > max_width || + !tile->height || tile->height > max_height) { + dev_err(priv->ipu->dev, "invalid %s tile size: %ux%u\n", + image->type == IMAGE_CONVERT_IN ? "input" : + "output", tile->width, tile->height); + return -EINVAL; + } + } + + return 0; +} + +/* + * Use the rotation transformation to find the tile coordinates + * (row, col) of a tile in the destination frame that corresponds + * to the given tile coordinates of a source frame. The destination + * coordinate is then converted to a tile index. + */ +static int transform_tile_index(struct ipu_image_convert_ctx *ctx, + int src_row, int src_col) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_convert_image *s_image = &ctx->in; + struct ipu_image_convert_image *d_image = &ctx->out; + int dst_row, dst_col; + + /* with no rotation it's a 1:1 mapping */ + if (ctx->rot_mode == IPU_ROTATE_NONE) + return src_row * s_image->num_cols + src_col; + + /* + * before doing the transform, first we have to translate + * source row,col for an origin in the center of s_image + */ + src_row = src_row * 2 - (s_image->num_rows - 1); + src_col = src_col * 2 - (s_image->num_cols - 1); + + /* do the rotation transform */ + if (ctx->rot_mode & IPU_ROT_BIT_90) { + dst_col = -src_row; + dst_row = src_col; + } else { + dst_col = src_col; + dst_row = src_row; + } + + /* apply flip */ + if (ctx->rot_mode & IPU_ROT_BIT_HFLIP) + dst_col = -dst_col; + if (ctx->rot_mode & IPU_ROT_BIT_VFLIP) + dst_row = -dst_row; + + dev_dbg(priv->ipu->dev, "task %u: ctx %p: [%d,%d] --> [%d,%d]\n", + chan->ic_task, ctx, src_col, src_row, dst_col, dst_row); + + /* + * finally translate dest row,col using an origin in upper + * left of d_image + */ + dst_row += d_image->num_rows - 1; + dst_col += d_image->num_cols - 1; + dst_row /= 2; + dst_col /= 2; + + return dst_row * d_image->num_cols + dst_col; +} + +/* + * Fill the out_tile_map[] with transformed destination tile indeces. + */ +static void calc_out_tile_map(struct ipu_image_convert_ctx *ctx) +{ + struct ipu_image_convert_image *s_image = &ctx->in; + unsigned int row, col, tile = 0; + + for (row = 0; row < s_image->num_rows; row++) { + for (col = 0; col < s_image->num_cols; col++) { + ctx->out_tile_map[tile] = + transform_tile_index(ctx, row, col); + tile++; + } + } +} + +static int calc_tile_offsets_planar(struct ipu_image_convert_ctx *ctx, + struct ipu_image_convert_image *image) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + const struct ipu_image_pixfmt *fmt = image->fmt; + unsigned int row, col, tile = 0; + u32 H, top, y_stride, uv_stride; + u32 uv_row_off, uv_col_off, uv_off, u_off, v_off; + u32 y_row_off, y_col_off, y_off; + u32 y_size, uv_size; + + /* setup some convenience vars */ + H = image->base.pix.height; + + y_stride = image->stride; + uv_stride = y_stride / fmt->uv_width_dec; + if (fmt->uv_packed) + uv_stride *= 2; + + y_size = H * y_stride; + uv_size = y_size / (fmt->uv_width_dec * fmt->uv_height_dec); + + for (row = 0; row < image->num_rows; row++) { + top = image->tile[tile].top; + y_row_off = top * y_stride; + uv_row_off = (top * uv_stride) / fmt->uv_height_dec; + + for (col = 0; col < image->num_cols; col++) { + y_col_off = image->tile[tile].left; + uv_col_off = y_col_off / fmt->uv_width_dec; + if (fmt->uv_packed) + uv_col_off *= 2; + + y_off = y_row_off + y_col_off; + uv_off = uv_row_off + uv_col_off; + + u_off = y_size - y_off + uv_off; + v_off = (fmt->uv_packed) ? 0 : u_off + uv_size; + if (fmt->uv_swapped) + swap(u_off, v_off); + + image->tile[tile].offset = y_off; + image->tile[tile].u_off = u_off; + image->tile[tile++].v_off = v_off; + + if ((y_off & 0x7) || (u_off & 0x7) || (v_off & 0x7)) { + dev_err(priv->ipu->dev, + "task %u: ctx %p: %s@[%d,%d]: " + "y_off %08x, u_off %08x, v_off %08x\n", + chan->ic_task, ctx, + image->type == IMAGE_CONVERT_IN ? + "Input" : "Output", row, col, + y_off, u_off, v_off); + return -EINVAL; + } + } + } + + return 0; +} + +static int calc_tile_offsets_packed(struct ipu_image_convert_ctx *ctx, + struct ipu_image_convert_image *image) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + const struct ipu_image_pixfmt *fmt = image->fmt; + unsigned int row, col, tile = 0; + u32 bpp, stride, offset; + u32 row_off, col_off; + + /* setup some convenience vars */ + stride = image->stride; + bpp = fmt->bpp; + + for (row = 0; row < image->num_rows; row++) { + row_off = image->tile[tile].top * stride; + + for (col = 0; col < image->num_cols; col++) { + col_off = (image->tile[tile].left * bpp) >> 3; + + offset = row_off + col_off; + + image->tile[tile].offset = offset; + image->tile[tile].u_off = 0; + image->tile[tile++].v_off = 0; + + if (offset & 0x7) { + dev_err(priv->ipu->dev, + "task %u: ctx %p: %s@[%d,%d]: " + "phys %08x\n", + chan->ic_task, ctx, + image->type == IMAGE_CONVERT_IN ? + "Input" : "Output", row, col, + row_off + col_off); + return -EINVAL; + } + } + } + + return 0; +} + +static int calc_tile_offsets(struct ipu_image_convert_ctx *ctx, + struct ipu_image_convert_image *image) +{ + if (image->fmt->planar) + return calc_tile_offsets_planar(ctx, image); + + return calc_tile_offsets_packed(ctx, image); +} + +/* + * Calculate the resizing ratio for the IC main processing section given input + * size, fixed downsizing coefficient, and output size. + * Either round to closest for the next tile's first pixel to minimize seams + * and distortion (for all but right column / bottom row), or round down to + * avoid sampling beyond the edges of the input image for this tile's last + * pixel. + * Returns the resizing coefficient, resizing ratio is 8192.0 / resize_coeff. + */ +static u32 calc_resize_coeff(u32 input_size, u32 downsize_coeff, + u32 output_size, bool allow_overshoot) +{ + u32 downsized = input_size >> downsize_coeff; + + if (allow_overshoot) + return DIV_ROUND_CLOSEST(8192 * downsized, output_size); + else + return 8192 * (downsized - 1) / (output_size - 1); +} + +/* + * Slightly modify resize coefficients per tile to hide the bilinear + * interpolator reset at tile borders, shifting the right / bottom edge + * by up to a half input pixel. This removes noticeable seams between + * tiles at higher upscaling factors. + */ +static void calc_tile_resize_coefficients(struct ipu_image_convert_ctx *ctx) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_tile *in_tile, *out_tile; + unsigned int col, row, tile_idx; + unsigned int last_output; + + for (col = 0; col < ctx->in.num_cols; col++) { + bool closest = (col < ctx->in.num_cols - 1) && + !(ctx->rot_mode & IPU_ROT_BIT_HFLIP); + u32 resized_width; + u32 resize_coeff_h; + u32 in_width; + + tile_idx = col; + in_tile = &ctx->in.tile[tile_idx]; + out_tile = &ctx->out.tile[ctx->out_tile_map[tile_idx]]; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) + resized_width = out_tile->height; + else + resized_width = out_tile->width; + + resize_coeff_h = calc_resize_coeff(in_tile->width, + ctx->downsize_coeff_h, + resized_width, closest); + + dev_dbg(priv->ipu->dev, "%s: column %u hscale: *8192/%u\n", + __func__, col, resize_coeff_h); + + /* + * With the horizontal scaling factor known, round up resized + * width (output width or height) to burst size. + */ + resized_width = round_up(resized_width, 8); + + /* + * Calculate input width from the last accessed input pixel + * given resized width and scaling coefficients. Round up to + * burst size. + */ + last_output = resized_width - 1; + if (closest && ((last_output * resize_coeff_h) % 8192)) + last_output++; + in_width = round_up( + (DIV_ROUND_UP(last_output * resize_coeff_h, 8192) + 1) + << ctx->downsize_coeff_h, 8); + + for (row = 0; row < ctx->in.num_rows; row++) { + tile_idx = row * ctx->in.num_cols + col; + in_tile = &ctx->in.tile[tile_idx]; + out_tile = &ctx->out.tile[ctx->out_tile_map[tile_idx]]; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) + out_tile->height = resized_width; + else + out_tile->width = resized_width; + + in_tile->width = in_width; + } + + ctx->resize_coeffs_h[col] = resize_coeff_h; + } + + for (row = 0; row < ctx->in.num_rows; row++) { + bool closest = (row < ctx->in.num_rows - 1) && + !(ctx->rot_mode & IPU_ROT_BIT_VFLIP); + u32 resized_height; + u32 resize_coeff_v; + u32 in_height; + + tile_idx = row * ctx->in.num_cols; + in_tile = &ctx->in.tile[tile_idx]; + out_tile = &ctx->out.tile[ctx->out_tile_map[tile_idx]]; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) + resized_height = out_tile->width; + else + resized_height = out_tile->height; + + resize_coeff_v = calc_resize_coeff(in_tile->height, + ctx->downsize_coeff_v, + resized_height, closest); + + dev_dbg(priv->ipu->dev, "%s: row %u vscale: *8192/%u\n", + __func__, row, resize_coeff_v); + + /* + * With the vertical scaling factor known, round up resized + * height (output width or height) to IDMAC limitations. + */ + resized_height = round_up(resized_height, 2); + + /* + * Calculate input width from the last accessed input pixel + * given resized height and scaling coefficients. Align to + * IDMAC restrictions. + */ + last_output = resized_height - 1; + if (closest && ((last_output * resize_coeff_v) % 8192)) + last_output++; + in_height = round_up( + (DIV_ROUND_UP(last_output * resize_coeff_v, 8192) + 1) + << ctx->downsize_coeff_v, 2); + + for (col = 0; col < ctx->in.num_cols; col++) { + tile_idx = row * ctx->in.num_cols + col; + in_tile = &ctx->in.tile[tile_idx]; + out_tile = &ctx->out.tile[ctx->out_tile_map[tile_idx]]; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) + out_tile->width = resized_height; + else + out_tile->height = resized_height; + + in_tile->height = in_height; + } + + ctx->resize_coeffs_v[row] = resize_coeff_v; + } +} + +/* + * return the number of runs in given queue (pending_q or done_q) + * for this context. hold irqlock when calling. + */ +static int get_run_count(struct ipu_image_convert_ctx *ctx, + struct list_head *q) +{ + struct ipu_image_convert_run *run; + int count = 0; + + lockdep_assert_held(&ctx->chan->irqlock); + + list_for_each_entry(run, q, list) { + if (run->ctx == ctx) + count++; + } + + return count; +} + +static void convert_stop(struct ipu_image_convert_run *run) +{ + struct ipu_image_convert_ctx *ctx = run->ctx; + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + + dev_dbg(priv->ipu->dev, "%s: task %u: stopping ctx %p run %p\n", + __func__, chan->ic_task, ctx, run); + + /* disable IC tasks and the channels */ + ipu_ic_task_disable(chan->ic); + ipu_idmac_disable_channel(chan->in_chan); + ipu_idmac_disable_channel(chan->out_chan); + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + ipu_idmac_disable_channel(chan->rotation_in_chan); + ipu_idmac_disable_channel(chan->rotation_out_chan); + ipu_idmac_unlink(chan->out_chan, chan->rotation_in_chan); + } + + ipu_ic_disable(chan->ic); +} + +static void init_idmac_channel(struct ipu_image_convert_ctx *ctx, + struct ipuv3_channel *channel, + struct ipu_image_convert_image *image, + enum ipu_rotate_mode rot_mode, + bool rot_swap_width_height, + unsigned int tile) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + unsigned int burst_size; + u32 width, height, stride; + dma_addr_t addr0, addr1 = 0; + struct ipu_image tile_image; + unsigned int tile_idx[2]; + + if (image->type == IMAGE_CONVERT_OUT) { + tile_idx[0] = ctx->out_tile_map[tile]; + tile_idx[1] = ctx->out_tile_map[1]; + } else { + tile_idx[0] = tile; + tile_idx[1] = 1; + } + + if (rot_swap_width_height) { + width = image->tile[tile_idx[0]].height; + height = image->tile[tile_idx[0]].width; + stride = image->tile[tile_idx[0]].rot_stride; + addr0 = ctx->rot_intermediate[0].phys; + if (ctx->double_buffering) + addr1 = ctx->rot_intermediate[1].phys; + } else { + width = image->tile[tile_idx[0]].width; + height = image->tile[tile_idx[0]].height; + stride = image->stride; + addr0 = image->base.phys0 + + image->tile[tile_idx[0]].offset; + if (ctx->double_buffering) + addr1 = image->base.phys0 + + image->tile[tile_idx[1]].offset; + } + + ipu_cpmem_zero(channel); + + memset(&tile_image, 0, sizeof(tile_image)); + tile_image.pix.width = tile_image.rect.width = width; + tile_image.pix.height = tile_image.rect.height = height; + tile_image.pix.bytesperline = stride; + tile_image.pix.pixelformat = image->fmt->fourcc; + tile_image.phys0 = addr0; + tile_image.phys1 = addr1; + if (image->fmt->planar && !rot_swap_width_height) { + tile_image.u_offset = image->tile[tile_idx[0]].u_off; + tile_image.v_offset = image->tile[tile_idx[0]].v_off; + } + + ipu_cpmem_set_image(channel, &tile_image); + + if (rot_mode) + ipu_cpmem_set_rotation(channel, rot_mode); + + /* + * Skip writing U and V components to odd rows in the output + * channels for planar 4:2:0. + */ + if ((channel == chan->out_chan || + channel == chan->rotation_out_chan) && + image->fmt->planar && image->fmt->uv_height_dec == 2) + ipu_cpmem_skip_odd_chroma_rows(channel); + + if (channel == chan->rotation_in_chan || + channel == chan->rotation_out_chan) { + burst_size = 8; + ipu_cpmem_set_block_mode(channel); + } else + burst_size = (width % 16) ? 8 : 16; + + ipu_cpmem_set_burstsize(channel, burst_size); + + ipu_ic_task_idma_init(chan->ic, channel, width, height, + burst_size, rot_mode); + + /* + * Setting a non-zero AXI ID collides with the PRG AXI snooping, so + * only do this when there is no PRG present. + */ + if (!channel->ipu->prg_priv) + ipu_cpmem_set_axi_id(channel, 1); + + ipu_idmac_set_double_buffer(channel, ctx->double_buffering); +} + +static int convert_start(struct ipu_image_convert_run *run, unsigned int tile) +{ + struct ipu_image_convert_ctx *ctx = run->ctx; + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_convert_image *s_image = &ctx->in; + struct ipu_image_convert_image *d_image = &ctx->out; + unsigned int dst_tile = ctx->out_tile_map[tile]; + unsigned int dest_width, dest_height; + unsigned int col, row; + u32 rsc; + int ret; + + dev_dbg(priv->ipu->dev, "%s: task %u: starting ctx %p run %p tile %u -> %u\n", + __func__, chan->ic_task, ctx, run, tile, dst_tile); + + /* clear EOF irq mask */ + ctx->eof_mask = 0; + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + /* swap width/height for resizer */ + dest_width = d_image->tile[dst_tile].height; + dest_height = d_image->tile[dst_tile].width; + } else { + dest_width = d_image->tile[dst_tile].width; + dest_height = d_image->tile[dst_tile].height; + } + + row = tile / s_image->num_cols; + col = tile % s_image->num_cols; + + rsc = (ctx->downsize_coeff_v << 30) | + (ctx->resize_coeffs_v[row] << 16) | + (ctx->downsize_coeff_h << 14) | + (ctx->resize_coeffs_h[col]); + + dev_dbg(priv->ipu->dev, "%s: %ux%u -> %ux%u (rsc = 0x%x)\n", + __func__, s_image->tile[tile].width, + s_image->tile[tile].height, dest_width, dest_height, rsc); + + /* setup the IC resizer and CSC */ + ret = ipu_ic_task_init_rsc(chan->ic, &ctx->csc, + s_image->tile[tile].width, + s_image->tile[tile].height, + dest_width, + dest_height, + rsc); + if (ret) { + dev_err(priv->ipu->dev, "ipu_ic_task_init failed, %d\n", ret); + return ret; + } + + /* init the source MEM-->IC PP IDMAC channel */ + init_idmac_channel(ctx, chan->in_chan, s_image, + IPU_ROTATE_NONE, false, tile); + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + /* init the IC PP-->MEM IDMAC channel */ + init_idmac_channel(ctx, chan->out_chan, d_image, + IPU_ROTATE_NONE, true, tile); + + /* init the MEM-->IC PP ROT IDMAC channel */ + init_idmac_channel(ctx, chan->rotation_in_chan, d_image, + ctx->rot_mode, true, tile); + + /* init the destination IC PP ROT-->MEM IDMAC channel */ + init_idmac_channel(ctx, chan->rotation_out_chan, d_image, + IPU_ROTATE_NONE, false, tile); + + /* now link IC PP-->MEM to MEM-->IC PP ROT */ + ipu_idmac_link(chan->out_chan, chan->rotation_in_chan); + } else { + /* init the destination IC PP-->MEM IDMAC channel */ + init_idmac_channel(ctx, chan->out_chan, d_image, + ctx->rot_mode, false, tile); + } + + /* enable the IC */ + ipu_ic_enable(chan->ic); + + /* set buffers ready */ + ipu_idmac_select_buffer(chan->in_chan, 0); + ipu_idmac_select_buffer(chan->out_chan, 0); + if (ipu_rot_mode_is_irt(ctx->rot_mode)) + ipu_idmac_select_buffer(chan->rotation_out_chan, 0); + if (ctx->double_buffering) { + ipu_idmac_select_buffer(chan->in_chan, 1); + ipu_idmac_select_buffer(chan->out_chan, 1); + if (ipu_rot_mode_is_irt(ctx->rot_mode)) + ipu_idmac_select_buffer(chan->rotation_out_chan, 1); + } + + /* enable the channels! */ + ipu_idmac_enable_channel(chan->in_chan); + ipu_idmac_enable_channel(chan->out_chan); + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + ipu_idmac_enable_channel(chan->rotation_in_chan); + ipu_idmac_enable_channel(chan->rotation_out_chan); + } + + ipu_ic_task_enable(chan->ic); + + ipu_cpmem_dump(chan->in_chan); + ipu_cpmem_dump(chan->out_chan); + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + ipu_cpmem_dump(chan->rotation_in_chan); + ipu_cpmem_dump(chan->rotation_out_chan); + } + + ipu_dump(priv->ipu); + + return 0; +} + +/* hold irqlock when calling */ +static int do_run(struct ipu_image_convert_run *run) +{ + struct ipu_image_convert_ctx *ctx = run->ctx; + struct ipu_image_convert_chan *chan = ctx->chan; + + lockdep_assert_held(&chan->irqlock); + + ctx->in.base.phys0 = run->in_phys; + ctx->out.base.phys0 = run->out_phys; + + ctx->cur_buf_num = 0; + ctx->next_tile = 1; + + /* remove run from pending_q and set as current */ + list_del(&run->list); + chan->current_run = run; + + return convert_start(run, 0); +} + +/* hold irqlock when calling */ +static void run_next(struct ipu_image_convert_chan *chan) +{ + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_convert_run *run, *tmp; + int ret; + + lockdep_assert_held(&chan->irqlock); + + list_for_each_entry_safe(run, tmp, &chan->pending_q, list) { + /* skip contexts that are aborting */ + if (run->ctx->aborting) { + dev_dbg(priv->ipu->dev, + "%s: task %u: skipping aborting ctx %p run %p\n", + __func__, chan->ic_task, run->ctx, run); + continue; + } + + ret = do_run(run); + if (!ret) + break; + + /* + * something went wrong with start, add the run + * to done q and continue to the next run in the + * pending q. + */ + run->status = ret; + list_add_tail(&run->list, &chan->done_q); + chan->current_run = NULL; + } +} + +static void empty_done_q(struct ipu_image_convert_chan *chan) +{ + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_convert_run *run; + unsigned long flags; + + spin_lock_irqsave(&chan->irqlock, flags); + + while (!list_empty(&chan->done_q)) { + run = list_entry(chan->done_q.next, + struct ipu_image_convert_run, + list); + + list_del(&run->list); + + dev_dbg(priv->ipu->dev, + "%s: task %u: completing ctx %p run %p with %d\n", + __func__, chan->ic_task, run->ctx, run, run->status); + + /* call the completion callback and free the run */ + spin_unlock_irqrestore(&chan->irqlock, flags); + run->ctx->complete(run, run->ctx->complete_context); + spin_lock_irqsave(&chan->irqlock, flags); + } + + spin_unlock_irqrestore(&chan->irqlock, flags); +} + +/* + * the bottom half thread clears out the done_q, calling the + * completion handler for each. + */ +static irqreturn_t do_bh(int irq, void *dev_id) +{ + struct ipu_image_convert_chan *chan = dev_id; + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_convert_ctx *ctx; + unsigned long flags; + + dev_dbg(priv->ipu->dev, "%s: task %u: enter\n", __func__, + chan->ic_task); + + empty_done_q(chan); + + spin_lock_irqsave(&chan->irqlock, flags); + + /* + * the done_q is cleared out, signal any contexts + * that are aborting that abort can complete. + */ + list_for_each_entry(ctx, &chan->ctx_list, list) { + if (ctx->aborting) { + dev_dbg(priv->ipu->dev, + "%s: task %u: signaling abort for ctx %p\n", + __func__, chan->ic_task, ctx); + complete_all(&ctx->aborted); + } + } + + spin_unlock_irqrestore(&chan->irqlock, flags); + + dev_dbg(priv->ipu->dev, "%s: task %u: exit\n", __func__, + chan->ic_task); + + return IRQ_HANDLED; +} + +static bool ic_settings_changed(struct ipu_image_convert_ctx *ctx) +{ + unsigned int cur_tile = ctx->next_tile - 1; + unsigned int next_tile = ctx->next_tile; + + if (ctx->resize_coeffs_h[cur_tile % ctx->in.num_cols] != + ctx->resize_coeffs_h[next_tile % ctx->in.num_cols] || + ctx->resize_coeffs_v[cur_tile / ctx->in.num_cols] != + ctx->resize_coeffs_v[next_tile / ctx->in.num_cols] || + ctx->in.tile[cur_tile].width != ctx->in.tile[next_tile].width || + ctx->in.tile[cur_tile].height != ctx->in.tile[next_tile].height || + ctx->out.tile[cur_tile].width != ctx->out.tile[next_tile].width || + ctx->out.tile[cur_tile].height != ctx->out.tile[next_tile].height) + return true; + + return false; +} + +/* hold irqlock when calling */ +static irqreturn_t do_tile_complete(struct ipu_image_convert_run *run) +{ + struct ipu_image_convert_ctx *ctx = run->ctx; + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_tile *src_tile, *dst_tile; + struct ipu_image_convert_image *s_image = &ctx->in; + struct ipu_image_convert_image *d_image = &ctx->out; + struct ipuv3_channel *outch; + unsigned int dst_idx; + + lockdep_assert_held(&chan->irqlock); + + outch = ipu_rot_mode_is_irt(ctx->rot_mode) ? + chan->rotation_out_chan : chan->out_chan; + + /* + * It is difficult to stop the channel DMA before the channels + * enter the paused state. Without double-buffering the channels + * are always in a paused state when the EOF irq occurs, so it + * is safe to stop the channels now. For double-buffering we + * just ignore the abort until the operation completes, when it + * is safe to shut down. + */ + if (ctx->aborting && !ctx->double_buffering) { + convert_stop(run); + run->status = -EIO; + goto done; + } + + if (ctx->next_tile == ctx->num_tiles) { + /* + * the conversion is complete + */ + convert_stop(run); + run->status = 0; + goto done; + } + + /* + * not done, place the next tile buffers. + */ + if (!ctx->double_buffering) { + if (ic_settings_changed(ctx)) { + convert_stop(run); + convert_start(run, ctx->next_tile); + } else { + src_tile = &s_image->tile[ctx->next_tile]; + dst_idx = ctx->out_tile_map[ctx->next_tile]; + dst_tile = &d_image->tile[dst_idx]; + + ipu_cpmem_set_buffer(chan->in_chan, 0, + s_image->base.phys0 + + src_tile->offset); + ipu_cpmem_set_buffer(outch, 0, + d_image->base.phys0 + + dst_tile->offset); + if (s_image->fmt->planar) + ipu_cpmem_set_uv_offset(chan->in_chan, + src_tile->u_off, + src_tile->v_off); + if (d_image->fmt->planar) + ipu_cpmem_set_uv_offset(outch, + dst_tile->u_off, + dst_tile->v_off); + + ipu_idmac_select_buffer(chan->in_chan, 0); + ipu_idmac_select_buffer(outch, 0); + } + } else if (ctx->next_tile < ctx->num_tiles - 1) { + + src_tile = &s_image->tile[ctx->next_tile + 1]; + dst_idx = ctx->out_tile_map[ctx->next_tile + 1]; + dst_tile = &d_image->tile[dst_idx]; + + ipu_cpmem_set_buffer(chan->in_chan, ctx->cur_buf_num, + s_image->base.phys0 + src_tile->offset); + ipu_cpmem_set_buffer(outch, ctx->cur_buf_num, + d_image->base.phys0 + dst_tile->offset); + + ipu_idmac_select_buffer(chan->in_chan, ctx->cur_buf_num); + ipu_idmac_select_buffer(outch, ctx->cur_buf_num); + + ctx->cur_buf_num ^= 1; + } + + ctx->eof_mask = 0; /* clear EOF irq mask for next tile */ + ctx->next_tile++; + return IRQ_HANDLED; +done: + list_add_tail(&run->list, &chan->done_q); + chan->current_run = NULL; + run_next(chan); + return IRQ_WAKE_THREAD; +} + +static irqreturn_t eof_irq(int irq, void *data) +{ + struct ipu_image_convert_chan *chan = data; + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_convert_ctx *ctx; + struct ipu_image_convert_run *run; + irqreturn_t ret = IRQ_HANDLED; + bool tile_complete = false; + unsigned long flags; + + spin_lock_irqsave(&chan->irqlock, flags); + + /* get current run and its context */ + run = chan->current_run; + if (!run) { + ret = IRQ_NONE; + goto out; + } + + ctx = run->ctx; + + if (irq == chan->in_eof_irq) { + ctx->eof_mask |= EOF_IRQ_IN; + } else if (irq == chan->out_eof_irq) { + ctx->eof_mask |= EOF_IRQ_OUT; + } else if (irq == chan->rot_in_eof_irq || + irq == chan->rot_out_eof_irq) { + if (!ipu_rot_mode_is_irt(ctx->rot_mode)) { + /* this was NOT a rotation op, shouldn't happen */ + dev_err(priv->ipu->dev, + "Unexpected rotation interrupt\n"); + goto out; + } + ctx->eof_mask |= (irq == chan->rot_in_eof_irq) ? + EOF_IRQ_ROT_IN : EOF_IRQ_ROT_OUT; + } else { + dev_err(priv->ipu->dev, "Received unknown irq %d\n", irq); + ret = IRQ_NONE; + goto out; + } + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) + tile_complete = (ctx->eof_mask == EOF_IRQ_ROT_COMPLETE); + else + tile_complete = (ctx->eof_mask == EOF_IRQ_COMPLETE); + + if (tile_complete) + ret = do_tile_complete(run); +out: + spin_unlock_irqrestore(&chan->irqlock, flags); + return ret; +} + +/* + * try to force the completion of runs for this ctx. Called when + * abort wait times out in ipu_image_convert_abort(). + */ +static void force_abort(struct ipu_image_convert_ctx *ctx) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_run *run; + unsigned long flags; + + spin_lock_irqsave(&chan->irqlock, flags); + + run = chan->current_run; + if (run && run->ctx == ctx) { + convert_stop(run); + run->status = -EIO; + list_add_tail(&run->list, &chan->done_q); + chan->current_run = NULL; + run_next(chan); + } + + spin_unlock_irqrestore(&chan->irqlock, flags); + + empty_done_q(chan); +} + +static void release_ipu_resources(struct ipu_image_convert_chan *chan) +{ + if (chan->in_eof_irq >= 0) + free_irq(chan->in_eof_irq, chan); + if (chan->rot_in_eof_irq >= 0) + free_irq(chan->rot_in_eof_irq, chan); + if (chan->out_eof_irq >= 0) + free_irq(chan->out_eof_irq, chan); + if (chan->rot_out_eof_irq >= 0) + free_irq(chan->rot_out_eof_irq, chan); + + if (!IS_ERR_OR_NULL(chan->in_chan)) + ipu_idmac_put(chan->in_chan); + if (!IS_ERR_OR_NULL(chan->out_chan)) + ipu_idmac_put(chan->out_chan); + if (!IS_ERR_OR_NULL(chan->rotation_in_chan)) + ipu_idmac_put(chan->rotation_in_chan); + if (!IS_ERR_OR_NULL(chan->rotation_out_chan)) + ipu_idmac_put(chan->rotation_out_chan); + if (!IS_ERR_OR_NULL(chan->ic)) + ipu_ic_put(chan->ic); + + chan->in_chan = chan->out_chan = chan->rotation_in_chan = + chan->rotation_out_chan = NULL; + chan->in_eof_irq = -1; + chan->rot_in_eof_irq = -1; + chan->out_eof_irq = -1; + chan->rot_out_eof_irq = -1; +} + +static int get_eof_irq(struct ipu_image_convert_chan *chan, + struct ipuv3_channel *channel) +{ + struct ipu_image_convert_priv *priv = chan->priv; + int ret, irq; + + irq = ipu_idmac_channel_irq(priv->ipu, channel, IPU_IRQ_EOF); + + ret = request_threaded_irq(irq, eof_irq, do_bh, 0, "ipu-ic", chan); + if (ret < 0) { + dev_err(priv->ipu->dev, "could not acquire irq %d\n", irq); + return ret; + } + + return irq; +} + +static int get_ipu_resources(struct ipu_image_convert_chan *chan) +{ + const struct ipu_image_convert_dma_chan *dma = chan->dma_ch; + struct ipu_image_convert_priv *priv = chan->priv; + int ret; + + /* get IC */ + chan->ic = ipu_ic_get(priv->ipu, chan->ic_task); + if (IS_ERR(chan->ic)) { + dev_err(priv->ipu->dev, "could not acquire IC\n"); + ret = PTR_ERR(chan->ic); + goto err; + } + + /* get IDMAC channels */ + chan->in_chan = ipu_idmac_get(priv->ipu, dma->in); + chan->out_chan = ipu_idmac_get(priv->ipu, dma->out); + if (IS_ERR(chan->in_chan) || IS_ERR(chan->out_chan)) { + dev_err(priv->ipu->dev, "could not acquire idmac channels\n"); + ret = -EBUSY; + goto err; + } + + chan->rotation_in_chan = ipu_idmac_get(priv->ipu, dma->rot_in); + chan->rotation_out_chan = ipu_idmac_get(priv->ipu, dma->rot_out); + if (IS_ERR(chan->rotation_in_chan) || IS_ERR(chan->rotation_out_chan)) { + dev_err(priv->ipu->dev, + "could not acquire idmac rotation channels\n"); + ret = -EBUSY; + goto err; + } + + /* acquire the EOF interrupts */ + ret = get_eof_irq(chan, chan->in_chan); + if (ret < 0) { + chan->in_eof_irq = -1; + goto err; + } + chan->in_eof_irq = ret; + + ret = get_eof_irq(chan, chan->rotation_in_chan); + if (ret < 0) { + chan->rot_in_eof_irq = -1; + goto err; + } + chan->rot_in_eof_irq = ret; + + ret = get_eof_irq(chan, chan->out_chan); + if (ret < 0) { + chan->out_eof_irq = -1; + goto err; + } + chan->out_eof_irq = ret; + + ret = get_eof_irq(chan, chan->rotation_out_chan); + if (ret < 0) { + chan->rot_out_eof_irq = -1; + goto err; + } + chan->rot_out_eof_irq = ret; + + return 0; +err: + release_ipu_resources(chan); + return ret; +} + +static int fill_image(struct ipu_image_convert_ctx *ctx, + struct ipu_image_convert_image *ic_image, + struct ipu_image *image, + enum ipu_image_convert_type type) +{ + struct ipu_image_convert_priv *priv = ctx->chan->priv; + + ic_image->base = *image; + ic_image->type = type; + + ic_image->fmt = get_format(image->pix.pixelformat); + if (!ic_image->fmt) { + dev_err(priv->ipu->dev, "pixelformat not supported for %s\n", + type == IMAGE_CONVERT_OUT ? "Output" : "Input"); + return -EINVAL; + } + + if (ic_image->fmt->planar) + ic_image->stride = ic_image->base.pix.width; + else + ic_image->stride = ic_image->base.pix.bytesperline; + + return 0; +} + +/* borrowed from drivers/media/v4l2-core/v4l2-common.c */ +static unsigned int clamp_align(unsigned int x, unsigned int min, + unsigned int max, unsigned int align) +{ + /* Bits that must be zero to be aligned */ + unsigned int mask = ~((1 << align) - 1); + + /* Clamp to aligned min and max */ + x = clamp(x, (min + ~mask) & mask, max & mask); + + /* Round to nearest aligned value */ + if (align) + x = (x + (1 << (align - 1))) & mask; + + return x; +} + +/* Adjusts input/output images to IPU restrictions */ +void ipu_image_convert_adjust(struct ipu_image *in, struct ipu_image *out, + enum ipu_rotate_mode rot_mode) +{ + const struct ipu_image_pixfmt *infmt, *outfmt; + u32 w_align_out, h_align_out; + u32 w_align_in, h_align_in; + + infmt = get_format(in->pix.pixelformat); + outfmt = get_format(out->pix.pixelformat); + + /* set some default pixel formats if needed */ + if (!infmt) { + in->pix.pixelformat = V4L2_PIX_FMT_RGB24; + infmt = get_format(V4L2_PIX_FMT_RGB24); + } + if (!outfmt) { + out->pix.pixelformat = V4L2_PIX_FMT_RGB24; + outfmt = get_format(V4L2_PIX_FMT_RGB24); + } + + /* image converter does not handle fields */ + in->pix.field = out->pix.field = V4L2_FIELD_NONE; + + /* resizer cannot downsize more than 4:1 */ + if (ipu_rot_mode_is_irt(rot_mode)) { + out->pix.height = max_t(__u32, out->pix.height, + in->pix.width / 4); + out->pix.width = max_t(__u32, out->pix.width, + in->pix.height / 4); + } else { + out->pix.width = max_t(__u32, out->pix.width, + in->pix.width / 4); + out->pix.height = max_t(__u32, out->pix.height, + in->pix.height / 4); + } + + /* align input width/height */ + w_align_in = ilog2(tile_width_align(IMAGE_CONVERT_IN, infmt, + rot_mode)); + h_align_in = ilog2(tile_height_align(IMAGE_CONVERT_IN, infmt, + rot_mode)); + in->pix.width = clamp_align(in->pix.width, MIN_W, MAX_W, + w_align_in); + in->pix.height = clamp_align(in->pix.height, MIN_H, MAX_H, + h_align_in); + + /* align output width/height */ + w_align_out = ilog2(tile_width_align(IMAGE_CONVERT_OUT, outfmt, + rot_mode)); + h_align_out = ilog2(tile_height_align(IMAGE_CONVERT_OUT, outfmt, + rot_mode)); + out->pix.width = clamp_align(out->pix.width, MIN_W, MAX_W, + w_align_out); + out->pix.height = clamp_align(out->pix.height, MIN_H, MAX_H, + h_align_out); + + /* set input/output strides and image sizes */ + in->pix.bytesperline = infmt->planar ? + clamp_align(in->pix.width, 2 << w_align_in, MAX_W, + w_align_in) : + clamp_align((in->pix.width * infmt->bpp) >> 3, + ((2 << w_align_in) * infmt->bpp) >> 3, + (MAX_W * infmt->bpp) >> 3, + w_align_in); + in->pix.sizeimage = infmt->planar ? + (in->pix.height * in->pix.bytesperline * infmt->bpp) >> 3 : + in->pix.height * in->pix.bytesperline; + out->pix.bytesperline = outfmt->planar ? out->pix.width : + (out->pix.width * outfmt->bpp) >> 3; + out->pix.sizeimage = outfmt->planar ? + (out->pix.height * out->pix.bytesperline * outfmt->bpp) >> 3 : + out->pix.height * out->pix.bytesperline; +} +EXPORT_SYMBOL_GPL(ipu_image_convert_adjust); + +/* + * this is used by ipu_image_convert_prepare() to verify set input and + * output images are valid before starting the conversion. Clients can + * also call it before calling ipu_image_convert_prepare(). + */ +int ipu_image_convert_verify(struct ipu_image *in, struct ipu_image *out, + enum ipu_rotate_mode rot_mode) +{ + struct ipu_image testin, testout; + + testin = *in; + testout = *out; + + ipu_image_convert_adjust(&testin, &testout, rot_mode); + + if (testin.pix.width != in->pix.width || + testin.pix.height != in->pix.height || + testout.pix.width != out->pix.width || + testout.pix.height != out->pix.height) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL_GPL(ipu_image_convert_verify); + +/* + * Call ipu_image_convert_prepare() to prepare for the conversion of + * given images and rotation mode. Returns a new conversion context. + */ +struct ipu_image_convert_ctx * +ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task, + struct ipu_image *in, struct ipu_image *out, + enum ipu_rotate_mode rot_mode, + ipu_image_convert_cb_t complete, + void *complete_context) +{ + struct ipu_image_convert_priv *priv = ipu->image_convert_priv; + struct ipu_image_convert_image *s_image, *d_image; + struct ipu_image_convert_chan *chan; + struct ipu_image_convert_ctx *ctx; + unsigned long flags; + unsigned int i; + bool get_res; + int ret; + + if (!in || !out || !complete || + (ic_task != IC_TASK_VIEWFINDER && + ic_task != IC_TASK_POST_PROCESSOR)) + return ERR_PTR(-EINVAL); + + /* verify the in/out images before continuing */ + ret = ipu_image_convert_verify(in, out, rot_mode); + if (ret) { + dev_err(priv->ipu->dev, "%s: in/out formats invalid\n", + __func__); + return ERR_PTR(ret); + } + + chan = &priv->chan[ic_task]; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return ERR_PTR(-ENOMEM); + + dev_dbg(priv->ipu->dev, "%s: task %u: ctx %p\n", __func__, + chan->ic_task, ctx); + + ctx->chan = chan; + init_completion(&ctx->aborted); + + ctx->rot_mode = rot_mode; + + /* Sets ctx->in.num_rows/cols as well */ + ret = calc_image_resize_coefficients(ctx, in, out); + if (ret) + goto out_free; + + s_image = &ctx->in; + d_image = &ctx->out; + + /* set tiling and rotation */ + if (ipu_rot_mode_is_irt(rot_mode)) { + d_image->num_rows = s_image->num_cols; + d_image->num_cols = s_image->num_rows; + } else { + d_image->num_rows = s_image->num_rows; + d_image->num_cols = s_image->num_cols; + } + + ctx->num_tiles = d_image->num_cols * d_image->num_rows; + + ret = fill_image(ctx, s_image, in, IMAGE_CONVERT_IN); + if (ret) + goto out_free; + ret = fill_image(ctx, d_image, out, IMAGE_CONVERT_OUT); + if (ret) + goto out_free; + + calc_out_tile_map(ctx); + + find_seams(ctx, s_image, d_image); + + ret = calc_tile_dimensions(ctx, s_image); + if (ret) + goto out_free; + + ret = calc_tile_offsets(ctx, s_image); + if (ret) + goto out_free; + + calc_tile_dimensions(ctx, d_image); + ret = calc_tile_offsets(ctx, d_image); + if (ret) + goto out_free; + + calc_tile_resize_coefficients(ctx); + + ret = ipu_ic_calc_csc(&ctx->csc, + s_image->base.pix.ycbcr_enc, + s_image->base.pix.quantization, + ipu_pixelformat_to_colorspace(s_image->fmt->fourcc), + d_image->base.pix.ycbcr_enc, + d_image->base.pix.quantization, + ipu_pixelformat_to_colorspace(d_image->fmt->fourcc)); + if (ret) + goto out_free; + + dump_format(ctx, s_image); + dump_format(ctx, d_image); + + ctx->complete = complete; + ctx->complete_context = complete_context; + + /* + * Can we use double-buffering for this operation? If there is + * only one tile (the whole image can be converted in a single + * operation) there's no point in using double-buffering. Also, + * the IPU's IDMAC channels allow only a single U and V plane + * offset shared between both buffers, but these offsets change + * for every tile, and therefore would have to be updated for + * each buffer which is not possible. So double-buffering is + * impossible when either the source or destination images are + * a planar format (YUV420, YUV422P, etc.). Further, differently + * sized tiles or different resizing coefficients per tile + * prevent double-buffering as well. + */ + ctx->double_buffering = (ctx->num_tiles > 1 && + !s_image->fmt->planar && + !d_image->fmt->planar); + for (i = 1; i < ctx->num_tiles; i++) { + if (ctx->in.tile[i].width != ctx->in.tile[0].width || + ctx->in.tile[i].height != ctx->in.tile[0].height || + ctx->out.tile[i].width != ctx->out.tile[0].width || + ctx->out.tile[i].height != ctx->out.tile[0].height) { + ctx->double_buffering = false; + break; + } + } + for (i = 1; i < ctx->in.num_cols; i++) { + if (ctx->resize_coeffs_h[i] != ctx->resize_coeffs_h[0]) { + ctx->double_buffering = false; + break; + } + } + for (i = 1; i < ctx->in.num_rows; i++) { + if (ctx->resize_coeffs_v[i] != ctx->resize_coeffs_v[0]) { + ctx->double_buffering = false; + break; + } + } + + if (ipu_rot_mode_is_irt(ctx->rot_mode)) { + unsigned long intermediate_size = d_image->tile[0].size; + + for (i = 1; i < ctx->num_tiles; i++) { + if (d_image->tile[i].size > intermediate_size) + intermediate_size = d_image->tile[i].size; + } + + ret = alloc_dma_buf(priv, &ctx->rot_intermediate[0], + intermediate_size); + if (ret) + goto out_free; + if (ctx->double_buffering) { + ret = alloc_dma_buf(priv, + &ctx->rot_intermediate[1], + intermediate_size); + if (ret) + goto out_free_dmabuf0; + } + } + + spin_lock_irqsave(&chan->irqlock, flags); + + get_res = list_empty(&chan->ctx_list); + + list_add_tail(&ctx->list, &chan->ctx_list); + + spin_unlock_irqrestore(&chan->irqlock, flags); + + if (get_res) { + ret = get_ipu_resources(chan); + if (ret) + goto out_free_dmabuf1; + } + + return ctx; + +out_free_dmabuf1: + free_dma_buf(priv, &ctx->rot_intermediate[1]); + spin_lock_irqsave(&chan->irqlock, flags); + list_del(&ctx->list); + spin_unlock_irqrestore(&chan->irqlock, flags); +out_free_dmabuf0: + free_dma_buf(priv, &ctx->rot_intermediate[0]); +out_free: + kfree(ctx); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(ipu_image_convert_prepare); + +/* + * Carry out a single image conversion run. Only the physaddr's of the input + * and output image buffers are needed. The conversion context must have + * been created previously with ipu_image_convert_prepare(). + */ +int ipu_image_convert_queue(struct ipu_image_convert_run *run) +{ + struct ipu_image_convert_chan *chan; + struct ipu_image_convert_priv *priv; + struct ipu_image_convert_ctx *ctx; + unsigned long flags; + int ret = 0; + + if (!run || !run->ctx || !run->in_phys || !run->out_phys) + return -EINVAL; + + ctx = run->ctx; + chan = ctx->chan; + priv = chan->priv; + + dev_dbg(priv->ipu->dev, "%s: task %u: ctx %p run %p\n", __func__, + chan->ic_task, ctx, run); + + INIT_LIST_HEAD(&run->list); + + spin_lock_irqsave(&chan->irqlock, flags); + + if (ctx->aborting) { + ret = -EIO; + goto unlock; + } + + list_add_tail(&run->list, &chan->pending_q); + + if (!chan->current_run) { + ret = do_run(run); + if (ret) + chan->current_run = NULL; + } +unlock: + spin_unlock_irqrestore(&chan->irqlock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(ipu_image_convert_queue); + +/* Abort any active or pending conversions for this context */ +static void __ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + struct ipu_image_convert_run *run, *active_run, *tmp; + unsigned long flags; + int run_count, ret; + + spin_lock_irqsave(&chan->irqlock, flags); + + /* move all remaining pending runs in this context to done_q */ + list_for_each_entry_safe(run, tmp, &chan->pending_q, list) { + if (run->ctx != ctx) + continue; + run->status = -EIO; + list_move_tail(&run->list, &chan->done_q); + } + + run_count = get_run_count(ctx, &chan->done_q); + active_run = (chan->current_run && chan->current_run->ctx == ctx) ? + chan->current_run : NULL; + + if (active_run) + reinit_completion(&ctx->aborted); + + ctx->aborting = true; + + spin_unlock_irqrestore(&chan->irqlock, flags); + + if (!run_count && !active_run) { + dev_dbg(priv->ipu->dev, + "%s: task %u: no abort needed for ctx %p\n", + __func__, chan->ic_task, ctx); + return; + } + + if (!active_run) { + empty_done_q(chan); + return; + } + + dev_dbg(priv->ipu->dev, + "%s: task %u: wait for completion: %d runs\n", + __func__, chan->ic_task, run_count); + + ret = wait_for_completion_timeout(&ctx->aborted, + msecs_to_jiffies(10000)); + if (ret == 0) { + dev_warn(priv->ipu->dev, "%s: timeout\n", __func__); + force_abort(ctx); + } +} + +void ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx) +{ + __ipu_image_convert_abort(ctx); + ctx->aborting = false; +} +EXPORT_SYMBOL_GPL(ipu_image_convert_abort); + +/* Unprepare image conversion context */ +void ipu_image_convert_unprepare(struct ipu_image_convert_ctx *ctx) +{ + struct ipu_image_convert_chan *chan = ctx->chan; + struct ipu_image_convert_priv *priv = chan->priv; + unsigned long flags; + bool put_res; + + /* make sure no runs are hanging around */ + __ipu_image_convert_abort(ctx); + + dev_dbg(priv->ipu->dev, "%s: task %u: removing ctx %p\n", __func__, + chan->ic_task, ctx); + + spin_lock_irqsave(&chan->irqlock, flags); + + list_del(&ctx->list); + + put_res = list_empty(&chan->ctx_list); + + spin_unlock_irqrestore(&chan->irqlock, flags); + + if (put_res) + release_ipu_resources(chan); + + free_dma_buf(priv, &ctx->rot_intermediate[1]); + free_dma_buf(priv, &ctx->rot_intermediate[0]); + + kfree(ctx); +} +EXPORT_SYMBOL_GPL(ipu_image_convert_unprepare); + +/* + * "Canned" asynchronous single image conversion. Allocates and returns + * a new conversion run. On successful return the caller must free the + * run and call ipu_image_convert_unprepare() after conversion completes. + */ +struct ipu_image_convert_run * +ipu_image_convert(struct ipu_soc *ipu, enum ipu_ic_task ic_task, + struct ipu_image *in, struct ipu_image *out, + enum ipu_rotate_mode rot_mode, + ipu_image_convert_cb_t complete, + void *complete_context) +{ + struct ipu_image_convert_ctx *ctx; + struct ipu_image_convert_run *run; + int ret; + + ctx = ipu_image_convert_prepare(ipu, ic_task, in, out, rot_mode, + complete, complete_context); + if (IS_ERR(ctx)) + return ERR_CAST(ctx); + + run = kzalloc(sizeof(*run), GFP_KERNEL); + if (!run) { + ipu_image_convert_unprepare(ctx); + return ERR_PTR(-ENOMEM); + } + + run->ctx = ctx; + run->in_phys = in->phys0; + run->out_phys = out->phys0; + + ret = ipu_image_convert_queue(run); + if (ret) { + ipu_image_convert_unprepare(ctx); + kfree(run); + return ERR_PTR(ret); + } + + return run; +} +EXPORT_SYMBOL_GPL(ipu_image_convert); + +/* "Canned" synchronous single image conversion */ +static void image_convert_sync_complete(struct ipu_image_convert_run *run, + void *data) +{ + struct completion *comp = data; + + complete(comp); +} + +int ipu_image_convert_sync(struct ipu_soc *ipu, enum ipu_ic_task ic_task, + struct ipu_image *in, struct ipu_image *out, + enum ipu_rotate_mode rot_mode) +{ + struct ipu_image_convert_run *run; + struct completion comp; + int ret; + + init_completion(&comp); + + run = ipu_image_convert(ipu, ic_task, in, out, rot_mode, + image_convert_sync_complete, &comp); + if (IS_ERR(run)) + return PTR_ERR(run); + + ret = wait_for_completion_timeout(&comp, msecs_to_jiffies(10000)); + ret = (ret == 0) ? -ETIMEDOUT : 0; + + ipu_image_convert_unprepare(run->ctx); + kfree(run); + + return ret; +} +EXPORT_SYMBOL_GPL(ipu_image_convert_sync); + +int ipu_image_convert_init(struct ipu_soc *ipu, struct device *dev) +{ + struct ipu_image_convert_priv *priv; + int i; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + ipu->image_convert_priv = priv; + priv->ipu = ipu; + + for (i = 0; i < IC_NUM_TASKS; i++) { + struct ipu_image_convert_chan *chan = &priv->chan[i]; + + chan->ic_task = i; + chan->priv = priv; + chan->dma_ch = &image_convert_dma_chan[i]; + chan->in_eof_irq = -1; + chan->rot_in_eof_irq = -1; + chan->out_eof_irq = -1; + chan->rot_out_eof_irq = -1; + + spin_lock_init(&chan->irqlock); + INIT_LIST_HEAD(&chan->ctx_list); + INIT_LIST_HEAD(&chan->pending_q); + INIT_LIST_HEAD(&chan->done_q); + } + + return 0; +} + +void ipu_image_convert_exit(struct ipu_soc *ipu) +{ +} |