diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/hwmon/dme1737.c | 2787 |
1 files changed, 2787 insertions, 0 deletions
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c new file mode 100644 index 000000000..66c48f70f --- /dev/null +++ b/drivers/hwmon/dme1737.c @@ -0,0 +1,2787 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x, SCH5027, + * and SCH5127 Super-I/O chips integrated hardware monitoring + * features. + * Copyright (c) 2007, 2008, 2009, 2010 Juerg Haefliger <juergh@gmail.com> + * + * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access + * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus + * if a SCH311x or SCH5127 chip is found. Both types of chips have very + * similar hardware monitoring capabilities but differ in the way they can be + * accessed. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/acpi.h> +#include <linux/io.h> + +/* ISA device, if found */ +static struct platform_device *pdev; + +/* Module load parameters */ +static bool force_start; +module_param(force_start, bool, 0); +MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs"); + +static unsigned short force_id; +module_param(force_id, ushort, 0); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); + +static bool probe_all_addr; +module_param(probe_all_addr, bool, 0); +MODULE_PARM_DESC(probe_all_addr, + "Include probing of non-standard LPC addresses"); + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; + +enum chips { dme1737, sch5027, sch311x, sch5127 }; + +#define DO_REPORT "Please report to the driver maintainer." + +/* --------------------------------------------------------------------- + * Registers + * + * The sensors are defined as follows: + * + * Voltages Temperatures + * -------- ------------ + * in0 +5VTR (+5V stdby) temp1 Remote diode 1 + * in1 Vccp (proc core) temp2 Internal temp + * in2 VCC (internal +3.3V) temp3 Remote diode 2 + * in3 +5V + * in4 +12V + * in5 VTR (+3.3V stby) + * in6 Vbat + * in7 Vtrip (sch5127 only) + * + * --------------------------------------------------------------------- */ + +/* Voltages (in) numbered 0-7 (ix) */ +#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) : \ + (ix) < 7 ? 0x94 + (ix) : \ + 0x1f) +#define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \ + : 0x91 + (ix) * 2) +#define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \ + : 0x92 + (ix) * 2) + +/* Temperatures (temp) numbered 0-2 (ix) */ +#define DME1737_REG_TEMP(ix) (0x25 + (ix)) +#define DME1737_REG_TEMP_MIN(ix) (0x4e + (ix) * 2) +#define DME1737_REG_TEMP_MAX(ix) (0x4f + (ix) * 2) +#define DME1737_REG_TEMP_OFFSET(ix) ((ix) == 0 ? 0x1f \ + : 0x1c + (ix)) + +/* + * Voltage and temperature LSBs + * The LSBs (4 bits each) are stored in 5 registers with the following layouts: + * IN_TEMP_LSB(0) = [in5, in6] + * IN_TEMP_LSB(1) = [temp3, temp1] + * IN_TEMP_LSB(2) = [in4, temp2] + * IN_TEMP_LSB(3) = [in3, in0] + * IN_TEMP_LSB(4) = [in2, in1] + * IN_TEMP_LSB(5) = [res, in7] + */ +#define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix)) +static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5}; +static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4}; +static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1}; +static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0}; + +/* Fans numbered 0-5 (ix) */ +#define DME1737_REG_FAN(ix) ((ix) < 4 ? 0x28 + (ix) * 2 \ + : 0xa1 + (ix) * 2) +#define DME1737_REG_FAN_MIN(ix) ((ix) < 4 ? 0x54 + (ix) * 2 \ + : 0xa5 + (ix) * 2) +#define DME1737_REG_FAN_OPT(ix) ((ix) < 4 ? 0x90 + (ix) \ + : 0xb2 + (ix)) +#define DME1737_REG_FAN_MAX(ix) (0xb4 + (ix)) /* only for fan[4-5] */ + +/* PWMs numbered 0-2, 4-5 (ix) */ +#define DME1737_REG_PWM(ix) ((ix) < 3 ? 0x30 + (ix) \ + : 0xa1 + (ix)) +#define DME1737_REG_PWM_CONFIG(ix) (0x5c + (ix)) /* only for pwm[0-2] */ +#define DME1737_REG_PWM_MIN(ix) (0x64 + (ix)) /* only for pwm[0-2] */ +#define DME1737_REG_PWM_FREQ(ix) ((ix) < 3 ? 0x5f + (ix) \ + : 0xa3 + (ix)) +/* + * The layout of the ramp rate registers is different from the other pwm + * registers. The bits for the 3 PWMs are stored in 2 registers: + * PWM_RR(0) = [OFF3, OFF2, OFF1, RES, RR1E, RR1-2, RR1-1, RR1-0] + * PWM_RR(1) = [RR2E, RR2-2, RR2-1, RR2-0, RR3E, RR3-2, RR3-1, RR3-0] + */ +#define DME1737_REG_PWM_RR(ix) (0x62 + (ix)) /* only for pwm[0-2] */ + +/* Thermal zones 0-2 */ +#define DME1737_REG_ZONE_LOW(ix) (0x67 + (ix)) +#define DME1737_REG_ZONE_ABS(ix) (0x6a + (ix)) +/* + * The layout of the hysteresis registers is different from the other zone + * registers. The bits for the 3 zones are stored in 2 registers: + * ZONE_HYST(0) = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0] + * ZONE_HYST(1) = [H3-3, H3-2, H3-1, H3-0, RES, RES, RES, RES] + */ +#define DME1737_REG_ZONE_HYST(ix) (0x6d + (ix)) + +/* + * Alarm registers and bit mapping + * The 3 8-bit alarm registers will be concatenated to a single 32-bit + * alarm value [0, ALARM3, ALARM2, ALARM1]. + */ +#define DME1737_REG_ALARM1 0x41 +#define DME1737_REG_ALARM2 0x42 +#define DME1737_REG_ALARM3 0x83 +static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18}; +static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6}; +static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23}; + +/* Miscellaneous registers */ +#define DME1737_REG_DEVICE 0x3d +#define DME1737_REG_COMPANY 0x3e +#define DME1737_REG_VERSTEP 0x3f +#define DME1737_REG_CONFIG 0x40 +#define DME1737_REG_CONFIG2 0x7f +#define DME1737_REG_VID 0x43 +#define DME1737_REG_TACH_PWM 0x81 + +/* --------------------------------------------------------------------- + * Misc defines + * --------------------------------------------------------------------- */ + +/* Chip identification */ +#define DME1737_COMPANY_SMSC 0x5c +#define DME1737_VERSTEP 0x88 +#define DME1737_VERSTEP_MASK 0xf8 +#define SCH311X_DEVICE 0x8c +#define SCH5027_VERSTEP 0x69 +#define SCH5127_DEVICE 0x8e + +/* Device ID values (global configuration register index 0x20) */ +#define DME1737_ID_1 0x77 +#define DME1737_ID_2 0x78 +#define SCH3112_ID 0x7c +#define SCH3114_ID 0x7d +#define SCH3116_ID 0x7f +#define SCH5027_ID 0x89 +#define SCH5127_ID 0x86 + +/* Length of ISA address segment */ +#define DME1737_EXTENT 2 + +/* chip-dependent features */ +#define HAS_TEMP_OFFSET (1 << 0) /* bit 0 */ +#define HAS_VID (1 << 1) /* bit 1 */ +#define HAS_ZONE3 (1 << 2) /* bit 2 */ +#define HAS_ZONE_HYST (1 << 3) /* bit 3 */ +#define HAS_PWM_MIN (1 << 4) /* bit 4 */ +#define HAS_FAN(ix) (1 << ((ix) + 5)) /* bits 5-10 */ +#define HAS_PWM(ix) (1 << ((ix) + 11)) /* bits 11-16 */ +#define HAS_IN7 (1 << 17) /* bit 17 */ + +/* --------------------------------------------------------------------- + * Data structures and manipulation thereof + * --------------------------------------------------------------------- */ + +struct dme1737_data { + struct i2c_client *client; /* for I2C devices only */ + struct device *hwmon_dev; + const char *name; + unsigned int addr; /* for ISA devices only */ + + struct mutex update_lock; + bool valid; /* true if following fields are valid */ + unsigned long last_update; /* in jiffies */ + unsigned long last_vbat; /* in jiffies */ + enum chips type; + const int *in_nominal; /* pointer to IN_NOMINAL array */ + + u8 vid; + u8 pwm_rr_en; + u32 has_features; + + /* Register values */ + u16 in[8]; + u8 in_min[8]; + u8 in_max[8]; + s16 temp[3]; + s8 temp_min[3]; + s8 temp_max[3]; + s8 temp_offset[3]; + u8 config; + u8 config2; + u8 vrm; + u16 fan[6]; + u16 fan_min[6]; + u8 fan_max[2]; + u8 fan_opt[6]; + u8 pwm[6]; + u8 pwm_min[3]; + u8 pwm_config[3]; + u8 pwm_acz[3]; + u8 pwm_freq[6]; + u8 pwm_rr[2]; + s8 zone_low[3]; + s8 zone_abs[3]; + u8 zone_hyst[2]; + u32 alarms; +}; + +/* Nominal voltage values */ +static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300, + 3300}; +static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, + 3300}; +static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300, + 3300}; +static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300, + 3300, 1500}; +#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \ + (type) == sch5027 ? IN_NOMINAL_SCH5027 : \ + (type) == sch5127 ? IN_NOMINAL_SCH5127 : \ + IN_NOMINAL_DME1737) + +/* + * Voltage input + * Voltage inputs have 16 bits resolution, limit values have 8 bits + * resolution. + */ +static inline int IN_FROM_REG(int reg, int nominal, int res) +{ + return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2)); +} + +static inline int IN_TO_REG(long val, int nominal) +{ + val = clamp_val(val, 0, 255 * nominal / 192); + return DIV_ROUND_CLOSEST(val * 192, nominal); +} + +/* + * Temperature input + * The register values represent temperatures in 2's complement notation from + * -127 degrees C to +127 degrees C. Temp inputs have 16 bits resolution, limit + * values have 8 bits resolution. + */ +static inline int TEMP_FROM_REG(int reg, int res) +{ + return (reg * 1000) >> (res - 8); +} + +static inline int TEMP_TO_REG(long val) +{ + val = clamp_val(val, -128000, 127000); + return DIV_ROUND_CLOSEST(val, 1000); +} + +/* Temperature range */ +static const int TEMP_RANGE[] = {2000, 2500, 3333, 4000, 5000, 6666, 8000, + 10000, 13333, 16000, 20000, 26666, 32000, + 40000, 53333, 80000}; + +static inline int TEMP_RANGE_FROM_REG(int reg) +{ + return TEMP_RANGE[(reg >> 4) & 0x0f]; +} + +static int TEMP_RANGE_TO_REG(long val, int reg) +{ + int i; + + for (i = 15; i > 0; i--) { + if (val > (TEMP_RANGE[i] + TEMP_RANGE[i - 1] + 1) / 2) + break; + } + + return (reg & 0x0f) | (i << 4); +} + +/* + * Temperature hysteresis + * Register layout: + * reg[0] = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0] + * reg[1] = [H3-3, H3-2, H3-1, H3-0, xxxx, xxxx, xxxx, xxxx] + */ +static inline int TEMP_HYST_FROM_REG(int reg, int ix) +{ + return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000; +} + +static inline int TEMP_HYST_TO_REG(int temp, long hyst, int ix, int reg) +{ + hyst = clamp_val(hyst, temp - 15000, temp); + hyst = DIV_ROUND_CLOSEST(temp - hyst, 1000); + + return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4); +} + +/* Fan input RPM */ +static inline int FAN_FROM_REG(int reg, int tpc) +{ + if (tpc) + return tpc * reg; + else + return (reg == 0 || reg == 0xffff) ? 0 : 90000 * 60 / reg; +} + +static inline int FAN_TO_REG(long val, int tpc) +{ + if (tpc) { + return clamp_val(val / tpc, 0, 0xffff); + } else { + return (val <= 0) ? 0xffff : + clamp_val(90000 * 60 / val, 0, 0xfffe); + } +} + +/* + * Fan TPC (tach pulse count) + * Converts a register value to a TPC multiplier or returns 0 if the tachometer + * is configured in legacy (non-tpc) mode + */ +static inline int FAN_TPC_FROM_REG(int reg) +{ + return (reg & 0x20) ? 0 : 60 >> (reg & 0x03); +} + +/* + * Fan type + * The type of a fan is expressed in number of pulses-per-revolution that it + * emits + */ +static inline int FAN_TYPE_FROM_REG(int reg) +{ + int edge = (reg >> 1) & 0x03; + + return (edge > 0) ? 1 << (edge - 1) : 0; +} + +static inline int FAN_TYPE_TO_REG(long val, int reg) +{ + int edge = (val == 4) ? 3 : val; + + return (reg & 0xf9) | (edge << 1); +} + +/* Fan max RPM */ +static const int FAN_MAX[] = {0x54, 0x38, 0x2a, 0x21, 0x1c, 0x18, 0x15, 0x12, + 0x11, 0x0f, 0x0e}; + +static int FAN_MAX_FROM_REG(int reg) +{ + int i; + + for (i = 10; i > 0; i--) { + if (reg == FAN_MAX[i]) + break; + } + + return 1000 + i * 500; +} + +static int FAN_MAX_TO_REG(long val) +{ + int i; + + for (i = 10; i > 0; i--) { + if (val > (1000 + (i - 1) * 500)) + break; + } + + return FAN_MAX[i]; +} + +/* + * PWM enable + * Register to enable mapping: + * 000: 2 fan on zone 1 auto + * 001: 2 fan on zone 2 auto + * 010: 2 fan on zone 3 auto + * 011: 0 fan full on + * 100: -1 fan disabled + * 101: 2 fan on hottest of zones 2,3 auto + * 110: 2 fan on hottest of zones 1,2,3 auto + * 111: 1 fan in manual mode + */ +static inline int PWM_EN_FROM_REG(int reg) +{ + static const int en[] = {2, 2, 2, 0, -1, 2, 2, 1}; + + return en[(reg >> 5) & 0x07]; +} + +static inline int PWM_EN_TO_REG(int val, int reg) +{ + int en = (val == 1) ? 7 : 3; + + return (reg & 0x1f) | ((en & 0x07) << 5); +} + +/* + * PWM auto channels zone + * Register to auto channels zone mapping (ACZ is a bitfield with bit x + * corresponding to zone x+1): + * 000: 001 fan on zone 1 auto + * 001: 010 fan on zone 2 auto + * 010: 100 fan on zone 3 auto + * 011: 000 fan full on + * 100: 000 fan disabled + * 101: 110 fan on hottest of zones 2,3 auto + * 110: 111 fan on hottest of zones 1,2,3 auto + * 111: 000 fan in manual mode + */ +static inline int PWM_ACZ_FROM_REG(int reg) +{ + static const int acz[] = {1, 2, 4, 0, 0, 6, 7, 0}; + + return acz[(reg >> 5) & 0x07]; +} + +static inline int PWM_ACZ_TO_REG(long val, int reg) +{ + int acz = (val == 4) ? 2 : val - 1; + + return (reg & 0x1f) | ((acz & 0x07) << 5); +} + +/* PWM frequency */ +static const int PWM_FREQ[] = {11, 15, 22, 29, 35, 44, 59, 88, + 15000, 20000, 30000, 25000, 0, 0, 0, 0}; + +static inline int PWM_FREQ_FROM_REG(int reg) +{ + return PWM_FREQ[reg & 0x0f]; +} + +static int PWM_FREQ_TO_REG(long val, int reg) +{ + int i; + + /* the first two cases are special - stupid chip design! */ + if (val > 27500) { + i = 10; + } else if (val > 22500) { + i = 11; + } else { + for (i = 9; i > 0; i--) { + if (val > (PWM_FREQ[i] + PWM_FREQ[i - 1] + 1) / 2) + break; + } + } + + return (reg & 0xf0) | i; +} + +/* + * PWM ramp rate + * Register layout: + * reg[0] = [OFF3, OFF2, OFF1, RES, RR1-E, RR1-2, RR1-1, RR1-0] + * reg[1] = [RR2-E, RR2-2, RR2-1, RR2-0, RR3-E, RR3-2, RR3-1, RR3-0] + */ +static const u8 PWM_RR[] = {206, 104, 69, 41, 26, 18, 10, 5}; + +static inline int PWM_RR_FROM_REG(int reg, int ix) +{ + int rr = (ix == 1) ? reg >> 4 : reg; + + return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0; +} + +static int PWM_RR_TO_REG(long val, int ix, int reg) +{ + int i; + + for (i = 0; i < 7; i++) { + if (val > (PWM_RR[i] + PWM_RR[i + 1] + 1) / 2) + break; + } + + return (ix == 1) ? (reg & 0x8f) | (i << 4) : (reg & 0xf8) | i; +} + +/* PWM ramp rate enable */ +static inline int PWM_RR_EN_FROM_REG(int reg, int ix) +{ + return PWM_RR_FROM_REG(reg, ix) ? 1 : 0; +} + +static inline int PWM_RR_EN_TO_REG(long val, int ix, int reg) +{ + int en = (ix == 1) ? 0x80 : 0x08; + + return val ? reg | en : reg & ~en; +} + +/* + * PWM min/off + * The PWM min/off bits are part of the PMW ramp rate register 0 (see above for + * the register layout). + */ +static inline int PWM_OFF_FROM_REG(int reg, int ix) +{ + return (reg >> (ix + 5)) & 0x01; +} + +static inline int PWM_OFF_TO_REG(int val, int ix, int reg) +{ + return (reg & ~(1 << (ix + 5))) | ((val & 0x01) << (ix + 5)); +} + +/* --------------------------------------------------------------------- + * Device I/O access + * + * ISA access is performed through an index/data register pair and needs to + * be protected by a mutex during runtime (not required for initialization). + * We use data->update_lock for this and need to ensure that we acquire it + * before calling dme1737_read or dme1737_write. + * --------------------------------------------------------------------- */ + +static u8 dme1737_read(const struct dme1737_data *data, u8 reg) +{ + struct i2c_client *client = data->client; + s32 val; + + if (client) { /* I2C device */ + val = i2c_smbus_read_byte_data(client, reg); + + if (val < 0) { + dev_warn(&client->dev, + "Read from register 0x%02x failed! %s\n", + reg, DO_REPORT); + } + } else { /* ISA device */ + outb(reg, data->addr); + val = inb(data->addr + 1); + } + + return val; +} + +static s32 dme1737_write(const struct dme1737_data *data, u8 reg, u8 val) +{ + struct i2c_client *client = data->client; + s32 res = 0; + + if (client) { /* I2C device */ + res = i2c_smbus_write_byte_data(client, reg, val); + + if (res < 0) { + dev_warn(&client->dev, + "Write to register 0x%02x failed! %s\n", + reg, DO_REPORT); + } + } else { /* ISA device */ + outb(reg, data->addr); + outb(val, data->addr + 1); + } + + return res; +} + +static struct dme1737_data *dme1737_update_device(struct device *dev) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + int ix; + u8 lsb[6]; + + mutex_lock(&data->update_lock); + + /* Enable a Vbat monitoring cycle every 10 mins */ + if (time_after(jiffies, data->last_vbat + 600 * HZ) || !data->valid) { + dme1737_write(data, DME1737_REG_CONFIG, dme1737_read(data, + DME1737_REG_CONFIG) | 0x10); + data->last_vbat = jiffies; + } + + /* Sample register contents every 1 sec */ + if (time_after(jiffies, data->last_update + HZ) || !data->valid) { + if (data->has_features & HAS_VID) { + data->vid = dme1737_read(data, DME1737_REG_VID) & + 0x3f; + } + + /* In (voltage) registers */ + for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { + /* + * Voltage inputs are stored as 16 bit values even + * though they have only 12 bits resolution. This is + * to make it consistent with the temp inputs. + */ + if (ix == 7 && !(data->has_features & HAS_IN7)) + continue; + data->in[ix] = dme1737_read(data, + DME1737_REG_IN(ix)) << 8; + data->in_min[ix] = dme1737_read(data, + DME1737_REG_IN_MIN(ix)); + data->in_max[ix] = dme1737_read(data, + DME1737_REG_IN_MAX(ix)); + } + + /* Temp registers */ + for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) { + /* + * Temp inputs are stored as 16 bit values even + * though they have only 12 bits resolution. This is + * to take advantage of implicit conversions between + * register values (2's complement) and temp values + * (signed decimal). + */ + data->temp[ix] = dme1737_read(data, + DME1737_REG_TEMP(ix)) << 8; + data->temp_min[ix] = dme1737_read(data, + DME1737_REG_TEMP_MIN(ix)); + data->temp_max[ix] = dme1737_read(data, + DME1737_REG_TEMP_MAX(ix)); + if (data->has_features & HAS_TEMP_OFFSET) { + data->temp_offset[ix] = dme1737_read(data, + DME1737_REG_TEMP_OFFSET(ix)); + } + } + + /* + * In and temp LSB registers + * The LSBs are latched when the MSBs are read, so the order in + * which the registers are read (MSB first, then LSB) is + * important! + */ + for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) { + if (ix == 5 && !(data->has_features & HAS_IN7)) + continue; + lsb[ix] = dme1737_read(data, + DME1737_REG_IN_TEMP_LSB(ix)); + } + for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { + if (ix == 7 && !(data->has_features & HAS_IN7)) + continue; + data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] << + DME1737_REG_IN_LSB_SHL[ix]) & 0xf0; + } + for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) { + data->temp[ix] |= (lsb[DME1737_REG_TEMP_LSB[ix]] << + DME1737_REG_TEMP_LSB_SHL[ix]) & 0xf0; + } + + /* Fan registers */ + for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) { + /* + * Skip reading registers if optional fans are not + * present + */ + if (!(data->has_features & HAS_FAN(ix))) + continue; + data->fan[ix] = dme1737_read(data, + DME1737_REG_FAN(ix)); + data->fan[ix] |= dme1737_read(data, + DME1737_REG_FAN(ix) + 1) << 8; + data->fan_min[ix] = dme1737_read(data, + DME1737_REG_FAN_MIN(ix)); + data->fan_min[ix] |= dme1737_read(data, + DME1737_REG_FAN_MIN(ix) + 1) << 8; + data->fan_opt[ix] = dme1737_read(data, + DME1737_REG_FAN_OPT(ix)); + /* fan_max exists only for fan[5-6] */ + if (ix > 3) { + data->fan_max[ix - 4] = dme1737_read(data, + DME1737_REG_FAN_MAX(ix)); + } + } + + /* PWM registers */ + for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) { + /* + * Skip reading registers if optional PWMs are not + * present + */ + if (!(data->has_features & HAS_PWM(ix))) + continue; + data->pwm[ix] = dme1737_read(data, + DME1737_REG_PWM(ix)); + data->pwm_freq[ix] = dme1737_read(data, + DME1737_REG_PWM_FREQ(ix)); + /* pwm_config and pwm_min exist only for pwm[1-3] */ + if (ix < 3) { + data->pwm_config[ix] = dme1737_read(data, + DME1737_REG_PWM_CONFIG(ix)); + data->pwm_min[ix] = dme1737_read(data, + DME1737_REG_PWM_MIN(ix)); + } + } + for (ix = 0; ix < ARRAY_SIZE(data->pwm_rr); ix++) { + data->pwm_rr[ix] = dme1737_read(data, + DME1737_REG_PWM_RR(ix)); + } + + /* Thermal zone registers */ + for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) { + /* Skip reading registers if zone3 is not present */ + if ((ix == 2) && !(data->has_features & HAS_ZONE3)) + continue; + /* sch5127 zone2 registers are special */ + if ((ix == 1) && (data->type == sch5127)) { + data->zone_low[1] = dme1737_read(data, + DME1737_REG_ZONE_LOW(2)); + data->zone_abs[1] = dme1737_read(data, + DME1737_REG_ZONE_ABS(2)); + } else { + data->zone_low[ix] = dme1737_read(data, + DME1737_REG_ZONE_LOW(ix)); + data->zone_abs[ix] = dme1737_read(data, + DME1737_REG_ZONE_ABS(ix)); + } + } + if (data->has_features & HAS_ZONE_HYST) { + for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { + data->zone_hyst[ix] = dme1737_read(data, + DME1737_REG_ZONE_HYST(ix)); + } + } + + /* Alarm registers */ + data->alarms = dme1737_read(data, + DME1737_REG_ALARM1); + /* + * Bit 7 tells us if the other alarm registers are non-zero and + * therefore also need to be read + */ + if (data->alarms & 0x80) { + data->alarms |= dme1737_read(data, + DME1737_REG_ALARM2) << 8; + data->alarms |= dme1737_read(data, + DME1737_REG_ALARM3) << 16; + } + + /* + * The ISA chips require explicit clearing of alarm bits. + * Don't worry, an alarm will come back if the condition + * that causes it still exists + */ + if (!data->client) { + if (data->alarms & 0xff0000) + dme1737_write(data, DME1737_REG_ALARM3, 0xff); + if (data->alarms & 0xff00) + dme1737_write(data, DME1737_REG_ALARM2, 0xff); + if (data->alarms & 0xff) + dme1737_write(data, DME1737_REG_ALARM1, 0xff); + } + + data->last_update = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* --------------------------------------------------------------------- + * Voltage sysfs attributes + * ix = [0-7] + * --------------------------------------------------------------------- */ + +#define SYS_IN_INPUT 0 +#define SYS_IN_MIN 1 +#define SYS_IN_MAX 2 +#define SYS_IN_ALARM 3 + +static ssize_t show_in(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dme1737_data *data = dme1737_update_device(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SYS_IN_INPUT: + res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16); + break; + case SYS_IN_MIN: + res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8); + break; + case SYS_IN_MAX: + res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8); + break; + case SYS_IN_ALARM: + res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01; + break; + default: + res = 0; + dev_dbg(dev, "Unknown function %d.\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_in(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + switch (fn) { + case SYS_IN_MIN: + data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]); + dme1737_write(data, DME1737_REG_IN_MIN(ix), + data->in_min[ix]); + break; + case SYS_IN_MAX: + data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]); + dme1737_write(data, DME1737_REG_IN_MAX(ix), + data->in_max[ix]); + break; + default: + dev_dbg(dev, "Unknown function %d.\n", fn); + } + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * Temperature sysfs attributes + * ix = [0-2] + * --------------------------------------------------------------------- */ + +#define SYS_TEMP_INPUT 0 +#define SYS_TEMP_MIN 1 +#define SYS_TEMP_MAX 2 +#define SYS_TEMP_OFFSET 3 +#define SYS_TEMP_ALARM 4 +#define SYS_TEMP_FAULT 5 + +static ssize_t show_temp(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dme1737_data *data = dme1737_update_device(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SYS_TEMP_INPUT: + res = TEMP_FROM_REG(data->temp[ix], 16); + break; + case SYS_TEMP_MIN: + res = TEMP_FROM_REG(data->temp_min[ix], 8); + break; + case SYS_TEMP_MAX: + res = TEMP_FROM_REG(data->temp_max[ix], 8); + break; + case SYS_TEMP_OFFSET: + res = TEMP_FROM_REG(data->temp_offset[ix], 8); + break; + case SYS_TEMP_ALARM: + res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01; + break; + case SYS_TEMP_FAULT: + res = (((u16)data->temp[ix] & 0xff00) == 0x8000); + break; + default: + res = 0; + dev_dbg(dev, "Unknown function %d.\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + switch (fn) { + case SYS_TEMP_MIN: + data->temp_min[ix] = TEMP_TO_REG(val); + dme1737_write(data, DME1737_REG_TEMP_MIN(ix), + data->temp_min[ix]); + break; + case SYS_TEMP_MAX: + data->temp_max[ix] = TEMP_TO_REG(val); + dme1737_write(data, DME1737_REG_TEMP_MAX(ix), + data->temp_max[ix]); + break; + case SYS_TEMP_OFFSET: + data->temp_offset[ix] = TEMP_TO_REG(val); + dme1737_write(data, DME1737_REG_TEMP_OFFSET(ix), + data->temp_offset[ix]); + break; + default: + dev_dbg(dev, "Unknown function %d.\n", fn); + } + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * Zone sysfs attributes + * ix = [0-2] + * --------------------------------------------------------------------- */ + +#define SYS_ZONE_AUTO_CHANNELS_TEMP 0 +#define SYS_ZONE_AUTO_POINT1_TEMP_HYST 1 +#define SYS_ZONE_AUTO_POINT1_TEMP 2 +#define SYS_ZONE_AUTO_POINT2_TEMP 3 +#define SYS_ZONE_AUTO_POINT3_TEMP 4 + +static ssize_t show_zone(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dme1737_data *data = dme1737_update_device(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SYS_ZONE_AUTO_CHANNELS_TEMP: + /* check config2 for non-standard temp-to-zone mapping */ + if ((ix == 1) && (data->config2 & 0x02)) + res = 4; + else + res = 1 << ix; + break; + case SYS_ZONE_AUTO_POINT1_TEMP_HYST: + res = TEMP_FROM_REG(data->zone_low[ix], 8) - + TEMP_HYST_FROM_REG(data->zone_hyst[ix == 2], ix); + break; + case SYS_ZONE_AUTO_POINT1_TEMP: + res = TEMP_FROM_REG(data->zone_low[ix], 8); + break; + case SYS_ZONE_AUTO_POINT2_TEMP: + /* pwm_freq holds the temp range bits in the upper nibble */ + res = TEMP_FROM_REG(data->zone_low[ix], 8) + + TEMP_RANGE_FROM_REG(data->pwm_freq[ix]); + break; + case SYS_ZONE_AUTO_POINT3_TEMP: + res = TEMP_FROM_REG(data->zone_abs[ix], 8); + break; + default: + res = 0; + dev_dbg(dev, "Unknown function %d.\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_zone(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val; + int temp; + int err; + u8 reg; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + switch (fn) { + case SYS_ZONE_AUTO_POINT1_TEMP_HYST: + /* Refresh the cache */ + data->zone_low[ix] = dme1737_read(data, + DME1737_REG_ZONE_LOW(ix)); + /* Modify the temp hyst value */ + temp = TEMP_FROM_REG(data->zone_low[ix], 8); + reg = dme1737_read(data, DME1737_REG_ZONE_HYST(ix == 2)); + data->zone_hyst[ix == 2] = TEMP_HYST_TO_REG(temp, val, ix, reg); + dme1737_write(data, DME1737_REG_ZONE_HYST(ix == 2), + data->zone_hyst[ix == 2]); + break; + case SYS_ZONE_AUTO_POINT1_TEMP: + data->zone_low[ix] = TEMP_TO_REG(val); + dme1737_write(data, DME1737_REG_ZONE_LOW(ix), + data->zone_low[ix]); + break; + case SYS_ZONE_AUTO_POINT2_TEMP: + /* Refresh the cache */ + data->zone_low[ix] = dme1737_read(data, + DME1737_REG_ZONE_LOW(ix)); + /* + * Modify the temp range value (which is stored in the upper + * nibble of the pwm_freq register) + */ + temp = TEMP_FROM_REG(data->zone_low[ix], 8); + val = clamp_val(val, temp, temp + 80000); + reg = dme1737_read(data, DME1737_REG_PWM_FREQ(ix)); + data->pwm_freq[ix] = TEMP_RANGE_TO_REG(val - temp, reg); + dme1737_write(data, DME1737_REG_PWM_FREQ(ix), + data->pwm_freq[ix]); + break; + case SYS_ZONE_AUTO_POINT3_TEMP: + data->zone_abs[ix] = TEMP_TO_REG(val); + dme1737_write(data, DME1737_REG_ZONE_ABS(ix), + data->zone_abs[ix]); + break; + default: + dev_dbg(dev, "Unknown function %d.\n", fn); + } + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * Fan sysfs attributes + * ix = [0-5] + * --------------------------------------------------------------------- */ + +#define SYS_FAN_INPUT 0 +#define SYS_FAN_MIN 1 +#define SYS_FAN_MAX 2 +#define SYS_FAN_ALARM 3 +#define SYS_FAN_TYPE 4 + +static ssize_t show_fan(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dme1737_data *data = dme1737_update_device(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SYS_FAN_INPUT: + res = FAN_FROM_REG(data->fan[ix], + ix < 4 ? 0 : + FAN_TPC_FROM_REG(data->fan_opt[ix])); + break; + case SYS_FAN_MIN: + res = FAN_FROM_REG(data->fan_min[ix], + ix < 4 ? 0 : + FAN_TPC_FROM_REG(data->fan_opt[ix])); + break; + case SYS_FAN_MAX: + /* only valid for fan[5-6] */ + res = FAN_MAX_FROM_REG(data->fan_max[ix - 4]); + break; + case SYS_FAN_ALARM: + res = (data->alarms >> DME1737_BIT_ALARM_FAN[ix]) & 0x01; + break; + case SYS_FAN_TYPE: + /* only valid for fan[1-4] */ + res = FAN_TYPE_FROM_REG(data->fan_opt[ix]); + break; + default: + res = 0; + dev_dbg(dev, "Unknown function %d.\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static ssize_t set_fan(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + switch (fn) { + case SYS_FAN_MIN: + if (ix < 4) { + data->fan_min[ix] = FAN_TO_REG(val, 0); + } else { + /* Refresh the cache */ + data->fan_opt[ix] = dme1737_read(data, + DME1737_REG_FAN_OPT(ix)); + /* Modify the fan min value */ + data->fan_min[ix] = FAN_TO_REG(val, + FAN_TPC_FROM_REG(data->fan_opt[ix])); + } + dme1737_write(data, DME1737_REG_FAN_MIN(ix), + data->fan_min[ix] & 0xff); + dme1737_write(data, DME1737_REG_FAN_MIN(ix) + 1, + data->fan_min[ix] >> 8); + break; + case SYS_FAN_MAX: + /* Only valid for fan[5-6] */ + data->fan_max[ix - 4] = FAN_MAX_TO_REG(val); + dme1737_write(data, DME1737_REG_FAN_MAX(ix), + data->fan_max[ix - 4]); + break; + case SYS_FAN_TYPE: + /* Only valid for fan[1-4] */ + if (!(val == 1 || val == 2 || val == 4)) { + count = -EINVAL; + dev_warn(dev, + "Fan type value %ld not supported. Choose one of 1, 2, or 4.\n", + val); + goto exit; + } + data->fan_opt[ix] = FAN_TYPE_TO_REG(val, dme1737_read(data, + DME1737_REG_FAN_OPT(ix))); + dme1737_write(data, DME1737_REG_FAN_OPT(ix), + data->fan_opt[ix]); + break; + default: + dev_dbg(dev, "Unknown function %d.\n", fn); + } +exit: + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * PWM sysfs attributes + * ix = [0-4] + * --------------------------------------------------------------------- */ + +#define SYS_PWM 0 +#define SYS_PWM_FREQ 1 +#define SYS_PWM_ENABLE 2 +#define SYS_PWM_RAMP_RATE 3 +#define SYS_PWM_AUTO_CHANNELS_ZONE 4 +#define SYS_PWM_AUTO_PWM_MIN 5 +#define SYS_PWM_AUTO_POINT1_PWM 6 +#define SYS_PWM_AUTO_POINT2_PWM 7 + +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dme1737_data *data = dme1737_update_device(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + int res; + + switch (fn) { + case SYS_PWM: + if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 0) + res = 255; + else + res = data->pwm[ix]; + break; + case SYS_PWM_FREQ: + res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]); + break; + case SYS_PWM_ENABLE: + if (ix >= 3) + res = 1; /* pwm[5-6] hard-wired to manual mode */ + else + res = PWM_EN_FROM_REG(data->pwm_config[ix]); + break; + case SYS_PWM_RAMP_RATE: + /* Only valid for pwm[1-3] */ + res = PWM_RR_FROM_REG(data->pwm_rr[ix > 0], ix); + break; + case SYS_PWM_AUTO_CHANNELS_ZONE: + /* Only valid for pwm[1-3] */ + if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) + res = PWM_ACZ_FROM_REG(data->pwm_config[ix]); + else + res = data->pwm_acz[ix]; + break; + case SYS_PWM_AUTO_PWM_MIN: + /* Only valid for pwm[1-3] */ + if (PWM_OFF_FROM_REG(data->pwm_rr[0], ix)) + res = data->pwm_min[ix]; + else + res = 0; + break; + case SYS_PWM_AUTO_POINT1_PWM: + /* Only valid for pwm[1-3] */ + res = data->pwm_min[ix]; + break; + case SYS_PWM_AUTO_POINT2_PWM: + /* Only valid for pwm[1-3] */ + res = 255; /* hard-wired */ + break; + default: + res = 0; + dev_dbg(dev, "Unknown function %d.\n", fn); + } + + return sprintf(buf, "%d\n", res); +} + +static struct attribute *dme1737_pwm_chmod_attr[]; +static void dme1737_chmod_file(struct device*, struct attribute*, umode_t); + +static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 + *sensor_attr_2 = to_sensor_dev_attr_2(attr); + int ix = sensor_attr_2->index; + int fn = sensor_attr_2->nr; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + switch (fn) { + case SYS_PWM: + data->pwm[ix] = clamp_val(val, 0, 255); + dme1737_write(data, DME1737_REG_PWM(ix), data->pwm[ix]); + break; + case SYS_PWM_FREQ: + data->pwm_freq[ix] = PWM_FREQ_TO_REG(val, dme1737_read(data, + DME1737_REG_PWM_FREQ(ix))); + dme1737_write(data, DME1737_REG_PWM_FREQ(ix), + data->pwm_freq[ix]); + break; + case SYS_PWM_ENABLE: + /* Only valid for pwm[1-3] */ + if (val < 0 || val > 2) { + count = -EINVAL; + dev_warn(dev, + "PWM enable %ld not supported. Choose one of 0, 1, or 2.\n", + val); + goto exit; + } + /* Refresh the cache */ + data->pwm_config[ix] = dme1737_read(data, + DME1737_REG_PWM_CONFIG(ix)); + if (val == PWM_EN_FROM_REG(data->pwm_config[ix])) { + /* Bail out if no change */ + goto exit; + } + /* Do some housekeeping if we are currently in auto mode */ + if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) { + /* Save the current zone channel assignment */ + data->pwm_acz[ix] = PWM_ACZ_FROM_REG( + data->pwm_config[ix]); + /* Save the current ramp rate state and disable it */ + data->pwm_rr[ix > 0] = dme1737_read(data, + DME1737_REG_PWM_RR(ix > 0)); + data->pwm_rr_en &= ~(1 << ix); + if (PWM_RR_EN_FROM_REG(data->pwm_rr[ix > 0], ix)) { + data->pwm_rr_en |= (1 << ix); + data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(0, ix, + data->pwm_rr[ix > 0]); + dme1737_write(data, + DME1737_REG_PWM_RR(ix > 0), + data->pwm_rr[ix > 0]); + } + } + /* Set the new PWM mode */ + switch (val) { + case 0: + /* Change permissions of pwm[ix] to read-only */ + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], + S_IRUGO); + /* Turn fan fully on */ + data->pwm_config[ix] = PWM_EN_TO_REG(0, + data->pwm_config[ix]); + dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), + data->pwm_config[ix]); + break; + case 1: + /* Turn on manual mode */ + data->pwm_config[ix] = PWM_EN_TO_REG(1, + data->pwm_config[ix]); + dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), + data->pwm_config[ix]); + /* Change permissions of pwm[ix] to read-writeable */ + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], + S_IRUGO | S_IWUSR); + break; + case 2: + /* Change permissions of pwm[ix] to read-only */ + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], + S_IRUGO); + /* + * Turn on auto mode using the saved zone channel + * assignment + */ + data->pwm_config[ix] = PWM_ACZ_TO_REG( + data->pwm_acz[ix], + data->pwm_config[ix]); + dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), + data->pwm_config[ix]); + /* Enable PWM ramp rate if previously enabled */ + if (data->pwm_rr_en & (1 << ix)) { + data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(1, ix, + dme1737_read(data, + DME1737_REG_PWM_RR(ix > 0))); + dme1737_write(data, + DME1737_REG_PWM_RR(ix > 0), + data->pwm_rr[ix > 0]); + } + break; + } + break; + case SYS_PWM_RAMP_RATE: + /* Only valid for pwm[1-3] */ + /* Refresh the cache */ + data->pwm_config[ix] = dme1737_read(data, + DME1737_REG_PWM_CONFIG(ix)); + data->pwm_rr[ix > 0] = dme1737_read(data, + DME1737_REG_PWM_RR(ix > 0)); + /* Set the ramp rate value */ + if (val > 0) { + data->pwm_rr[ix > 0] = PWM_RR_TO_REG(val, ix, + data->pwm_rr[ix > 0]); + } + /* + * Enable/disable the feature only if the associated PWM + * output is in automatic mode. + */ + if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) { + data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(val > 0, ix, + data->pwm_rr[ix > 0]); + } + dme1737_write(data, DME1737_REG_PWM_RR(ix > 0), + data->pwm_rr[ix > 0]); + break; + case SYS_PWM_AUTO_CHANNELS_ZONE: + /* Only valid for pwm[1-3] */ + if (!(val == 1 || val == 2 || val == 4 || + val == 6 || val == 7)) { + count = -EINVAL; + dev_warn(dev, + "PWM auto channels zone %ld not supported. Choose one of 1, 2, 4, 6, " + "or 7.\n", val); + goto exit; + } + /* Refresh the cache */ + data->pwm_config[ix] = dme1737_read(data, + DME1737_REG_PWM_CONFIG(ix)); + if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) { + /* + * PWM is already in auto mode so update the temp + * channel assignment + */ + data->pwm_config[ix] = PWM_ACZ_TO_REG(val, + data->pwm_config[ix]); + dme1737_write(data, DME1737_REG_PWM_CONFIG(ix), + data->pwm_config[ix]); + } else { + /* + * PWM is not in auto mode so we save the temp + * channel assignment for later use + */ + data->pwm_acz[ix] = val; + } + break; + case SYS_PWM_AUTO_PWM_MIN: + /* Only valid for pwm[1-3] */ + /* Refresh the cache */ + data->pwm_min[ix] = dme1737_read(data, + DME1737_REG_PWM_MIN(ix)); + /* + * There are only 2 values supported for the auto_pwm_min + * value: 0 or auto_point1_pwm. So if the temperature drops + * below the auto_point1_temp_hyst value, the fan either turns + * off or runs at auto_point1_pwm duty-cycle. + */ + if (val > ((data->pwm_min[ix] + 1) / 2)) { + data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix, + dme1737_read(data, + DME1737_REG_PWM_RR(0))); + } else { + data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix, + dme1737_read(data, + DME1737_REG_PWM_RR(0))); + } + dme1737_write(data, DME1737_REG_PWM_RR(0), + data->pwm_rr[0]); + break; + case SYS_PWM_AUTO_POINT1_PWM: + /* Only valid for pwm[1-3] */ + data->pwm_min[ix] = clamp_val(val, 0, 255); + dme1737_write(data, DME1737_REG_PWM_MIN(ix), + data->pwm_min[ix]); + break; + default: + dev_dbg(dev, "Unknown function %d.\n", fn); + } +exit: + mutex_unlock(&data->update_lock); + + return count; +} + +/* --------------------------------------------------------------------- + * Miscellaneous sysfs attributes + * --------------------------------------------------------------------- */ + +static ssize_t vrm_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct dme1737_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n", data->vrm); +} + +static ssize_t vrm_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + if (val > 255) + return -EINVAL; + + data->vrm = val; + return count; +} + +static ssize_t cpu0_vid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dme1737_data *data = dme1737_update_device(dev); + + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} + +static ssize_t name_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", data->name); +} + +/* --------------------------------------------------------------------- + * Sysfs device attribute defines and structs + * --------------------------------------------------------------------- */ + +/* Voltages 0-7 */ + +#define SENSOR_DEVICE_ATTR_IN(ix) \ +static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \ + show_in, NULL, SYS_IN_INPUT, ix); \ +static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \ + show_in, set_in, SYS_IN_MIN, ix); \ +static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \ + show_in, set_in, SYS_IN_MAX, ix); \ +static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \ + show_in, NULL, SYS_IN_ALARM, ix) + +SENSOR_DEVICE_ATTR_IN(0); +SENSOR_DEVICE_ATTR_IN(1); +SENSOR_DEVICE_ATTR_IN(2); +SENSOR_DEVICE_ATTR_IN(3); +SENSOR_DEVICE_ATTR_IN(4); +SENSOR_DEVICE_ATTR_IN(5); +SENSOR_DEVICE_ATTR_IN(6); +SENSOR_DEVICE_ATTR_IN(7); + +/* Temperatures 1-3 */ + +#define SENSOR_DEVICE_ATTR_TEMP(ix) \ +static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \ + show_temp, NULL, SYS_TEMP_INPUT, ix-1); \ +static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \ + show_temp, set_temp, SYS_TEMP_MIN, ix-1); \ +static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \ + show_temp, set_temp, SYS_TEMP_MAX, ix-1); \ +static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \ + show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \ +static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \ + show_temp, NULL, SYS_TEMP_ALARM, ix-1); \ +static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \ + show_temp, NULL, SYS_TEMP_FAULT, ix-1) + +SENSOR_DEVICE_ATTR_TEMP(1); +SENSOR_DEVICE_ATTR_TEMP(2); +SENSOR_DEVICE_ATTR_TEMP(3); + +/* Zones 1-3 */ + +#define SENSOR_DEVICE_ATTR_ZONE(ix) \ +static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \ + show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \ +static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \ + show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \ +static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \ + show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \ +static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \ + show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \ +static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \ + show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1) + +SENSOR_DEVICE_ATTR_ZONE(1); +SENSOR_DEVICE_ATTR_ZONE(2); +SENSOR_DEVICE_ATTR_ZONE(3); + +/* Fans 1-4 */ + +#define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \ + show_fan, NULL, SYS_FAN_INPUT, ix-1); \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \ + show_fan, set_fan, SYS_FAN_MIN, ix-1); \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \ + show_fan, NULL, SYS_FAN_ALARM, ix-1); \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \ + show_fan, set_fan, SYS_FAN_TYPE, ix-1) + +SENSOR_DEVICE_ATTR_FAN_1TO4(1); +SENSOR_DEVICE_ATTR_FAN_1TO4(2); +SENSOR_DEVICE_ATTR_FAN_1TO4(3); +SENSOR_DEVICE_ATTR_FAN_1TO4(4); + +/* Fans 5-6 */ + +#define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \ + show_fan, NULL, SYS_FAN_INPUT, ix-1); \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \ + show_fan, set_fan, SYS_FAN_MIN, ix-1); \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \ + show_fan, NULL, SYS_FAN_ALARM, ix-1); \ +static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \ + show_fan, set_fan, SYS_FAN_MAX, ix-1) + +SENSOR_DEVICE_ATTR_FAN_5TO6(5); +SENSOR_DEVICE_ATTR_FAN_5TO6(6); + +/* PWMs 1-3 */ + +#define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \ +static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \ + show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1) + +SENSOR_DEVICE_ATTR_PWM_1TO3(1); +SENSOR_DEVICE_ATTR_PWM_1TO3(2); +SENSOR_DEVICE_ATTR_PWM_1TO3(3); + +/* PWMs 5-6 */ + +#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \ +static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \ + show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \ + show_pwm, NULL, SYS_PWM_ENABLE, ix-1) + +SENSOR_DEVICE_ATTR_PWM_5TO6(5); +SENSOR_DEVICE_ATTR_PWM_5TO6(6); + +/* Misc */ + +static DEVICE_ATTR_RW(vrm); +static DEVICE_ATTR_RO(cpu0_vid); +static DEVICE_ATTR_RO(name); /* for ISA devices */ + +/* + * This struct holds all the attributes that are always present and need to be + * created unconditionally. The attributes that need modification of their + * permissions are created read-only and write permissions are added or removed + * on the fly when required + */ +static struct attribute *dme1737_attr[] = { + /* Voltages */ + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + /* Temperatures */ + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + /* Zones */ + &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_group = { + .attrs = dme1737_attr, +}; + +/* + * The following struct holds temp offset attributes, which are not available + * in all chips. The following chips support them: + * DME1737, SCH311x + */ +static struct attribute *dme1737_temp_offset_attr[] = { + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_temp_offset_group = { + .attrs = dme1737_temp_offset_attr, +}; + +/* + * The following struct holds VID related attributes, which are not available + * in all chips. The following chips support them: + * DME1737 + */ +static struct attribute *dme1737_vid_attr[] = { + &dev_attr_vrm.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group dme1737_vid_group = { + .attrs = dme1737_vid_attr, +}; + +/* + * The following struct holds temp zone 3 related attributes, which are not + * available in all chips. The following chips support them: + * DME1737, SCH311x, SCH5027 + */ +static struct attribute *dme1737_zone3_attr[] = { + &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_zone3_group = { + .attrs = dme1737_zone3_attr, +}; + + +/* + * The following struct holds temp zone hysteresis related attributes, which + * are not available in all chips. The following chips support them: + * DME1737, SCH311x + */ +static struct attribute *dme1737_zone_hyst_attr[] = { + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_zone_hyst_group = { + .attrs = dme1737_zone_hyst_attr, +}; + +/* + * The following struct holds voltage in7 related attributes, which + * are not available in all chips. The following chips support them: + * SCH5127 + */ +static struct attribute *dme1737_in7_attr[] = { + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_in7_group = { + .attrs = dme1737_in7_attr, +}; + +/* + * The following structs hold the PWM attributes, some of which are optional. + * Their creation depends on the chip configuration which is determined during + * module load. + */ +static struct attribute *dme1737_pwm1_attr[] = { + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm2_attr[] = { + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm3_attr[] = { + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm5_attr[] = { + &sensor_dev_attr_pwm5.dev_attr.attr, + &sensor_dev_attr_pwm5_freq.dev_attr.attr, + &sensor_dev_attr_pwm5_enable.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm6_attr[] = { + &sensor_dev_attr_pwm6.dev_attr.attr, + &sensor_dev_attr_pwm6_freq.dev_attr.attr, + &sensor_dev_attr_pwm6_enable.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_pwm_group[] = { + { .attrs = dme1737_pwm1_attr }, + { .attrs = dme1737_pwm2_attr }, + { .attrs = dme1737_pwm3_attr }, + { .attrs = NULL }, + { .attrs = dme1737_pwm5_attr }, + { .attrs = dme1737_pwm6_attr }, +}; + +/* + * The following struct holds auto PWM min attributes, which are not available + * in all chips. Their creation depends on the chip type which is determined + * during module load. + */ +static struct attribute *dme1737_auto_pwm_min_attr[] = { + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, +}; + +/* + * The following structs hold the fan attributes, some of which are optional. + * Their creation depends on the chip configuration which is determined during + * module load. + */ +static struct attribute *dme1737_fan1_attr[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan1_type.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_fan2_attr[] = { + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_type.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_fan3_attr[] = { + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_type.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_fan4_attr[] = { + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_type.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_fan5_attr[] = { + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_max.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_fan6_attr[] = { + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_max.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_fan_group[] = { + { .attrs = dme1737_fan1_attr }, + { .attrs = dme1737_fan2_attr }, + { .attrs = dme1737_fan3_attr }, + { .attrs = dme1737_fan4_attr }, + { .attrs = dme1737_fan5_attr }, + { .attrs = dme1737_fan6_attr }, +}; + +/* + * The permissions of the following zone attributes are changed to read- + * writeable if the chip is *not* locked. Otherwise they stay read-only. + */ +static struct attribute *dme1737_zone_chmod_attr[] = { + &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_zone_chmod_group = { + .attrs = dme1737_zone_chmod_attr, +}; + + +/* + * The permissions of the following zone 3 attributes are changed to read- + * writeable if the chip is *not* locked. Otherwise they stay read-only. + */ +static struct attribute *dme1737_zone3_chmod_attr[] = { + &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_zone3_chmod_group = { + .attrs = dme1737_zone3_chmod_attr, +}; + +/* + * The permissions of the following PWM attributes are changed to read- + * writeable if the chip is *not* locked and the respective PWM is available. + * Otherwise they stay read-only. + */ +static struct attribute *dme1737_pwm1_chmod_attr[] = { + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm2_chmod_attr[] = { + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm3_chmod_attr[] = { + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm5_chmod_attr[] = { + &sensor_dev_attr_pwm5.dev_attr.attr, + &sensor_dev_attr_pwm5_freq.dev_attr.attr, + NULL +}; +static struct attribute *dme1737_pwm6_chmod_attr[] = { + &sensor_dev_attr_pwm6.dev_attr.attr, + &sensor_dev_attr_pwm6_freq.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_pwm_chmod_group[] = { + { .attrs = dme1737_pwm1_chmod_attr }, + { .attrs = dme1737_pwm2_chmod_attr }, + { .attrs = dme1737_pwm3_chmod_attr }, + { .attrs = NULL }, + { .attrs = dme1737_pwm5_chmod_attr }, + { .attrs = dme1737_pwm6_chmod_attr }, +}; + +/* + * Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the + * chip is not locked. Otherwise they are read-only. + */ +static struct attribute *dme1737_pwm_chmod_attr[] = { + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, +}; + +/* --------------------------------------------------------------------- + * Super-IO functions + * --------------------------------------------------------------------- */ + +static inline void dme1737_sio_enter(int sio_cip) +{ + outb(0x55, sio_cip); +} + +static inline void dme1737_sio_exit(int sio_cip) +{ + outb(0xaa, sio_cip); +} + +static inline int dme1737_sio_inb(int sio_cip, int reg) +{ + outb(reg, sio_cip); + return inb(sio_cip + 1); +} + +static inline void dme1737_sio_outb(int sio_cip, int reg, int val) +{ + outb(reg, sio_cip); + outb(val, sio_cip + 1); +} + +/* --------------------------------------------------------------------- + * Device initialization + * --------------------------------------------------------------------- */ + +static int dme1737_i2c_get_features(int, struct dme1737_data*); + +static void dme1737_chmod_file(struct device *dev, + struct attribute *attr, umode_t mode) +{ + if (sysfs_chmod_file(&dev->kobj, attr, mode)) { + dev_warn(dev, "Failed to change permissions of %s.\n", + attr->name); + } +} + +static void dme1737_chmod_group(struct device *dev, + const struct attribute_group *group, + umode_t mode) +{ + struct attribute **attr; + + for (attr = group->attrs; *attr; attr++) + dme1737_chmod_file(dev, *attr, mode); +} + +static void dme1737_remove_files(struct device *dev) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + int ix; + + for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { + if (data->has_features & HAS_FAN(ix)) { + sysfs_remove_group(&dev->kobj, + &dme1737_fan_group[ix]); + } + } + + for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) { + if (data->has_features & HAS_PWM(ix)) { + sysfs_remove_group(&dev->kobj, + &dme1737_pwm_group[ix]); + if ((data->has_features & HAS_PWM_MIN) && ix < 3) { + sysfs_remove_file(&dev->kobj, + dme1737_auto_pwm_min_attr[ix]); + } + } + } + + if (data->has_features & HAS_TEMP_OFFSET) + sysfs_remove_group(&dev->kobj, &dme1737_temp_offset_group); + if (data->has_features & HAS_VID) + sysfs_remove_group(&dev->kobj, &dme1737_vid_group); + if (data->has_features & HAS_ZONE3) + sysfs_remove_group(&dev->kobj, &dme1737_zone3_group); + if (data->has_features & HAS_ZONE_HYST) + sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group); + if (data->has_features & HAS_IN7) + sysfs_remove_group(&dev->kobj, &dme1737_in7_group); + sysfs_remove_group(&dev->kobj, &dme1737_group); + + if (!data->client) + sysfs_remove_file(&dev->kobj, &dev_attr_name.attr); +} + +static int dme1737_create_files(struct device *dev) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + int err, ix; + + /* Create a name attribute for ISA devices */ + if (!data->client) { + err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr); + if (err) + goto exit; + } + + /* Create standard sysfs attributes */ + err = sysfs_create_group(&dev->kobj, &dme1737_group); + if (err) + goto exit_remove; + + /* Create chip-dependent sysfs attributes */ + if (data->has_features & HAS_TEMP_OFFSET) { + err = sysfs_create_group(&dev->kobj, + &dme1737_temp_offset_group); + if (err) + goto exit_remove; + } + if (data->has_features & HAS_VID) { + err = sysfs_create_group(&dev->kobj, &dme1737_vid_group); + if (err) + goto exit_remove; + } + if (data->has_features & HAS_ZONE3) { + err = sysfs_create_group(&dev->kobj, &dme1737_zone3_group); + if (err) + goto exit_remove; + } + if (data->has_features & HAS_ZONE_HYST) { + err = sysfs_create_group(&dev->kobj, &dme1737_zone_hyst_group); + if (err) + goto exit_remove; + } + if (data->has_features & HAS_IN7) { + err = sysfs_create_group(&dev->kobj, &dme1737_in7_group); + if (err) + goto exit_remove; + } + + /* Create fan sysfs attributes */ + for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { + if (data->has_features & HAS_FAN(ix)) { + err = sysfs_create_group(&dev->kobj, + &dme1737_fan_group[ix]); + if (err) + goto exit_remove; + } + } + + /* Create PWM sysfs attributes */ + for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) { + if (data->has_features & HAS_PWM(ix)) { + err = sysfs_create_group(&dev->kobj, + &dme1737_pwm_group[ix]); + if (err) + goto exit_remove; + if ((data->has_features & HAS_PWM_MIN) && (ix < 3)) { + err = sysfs_create_file(&dev->kobj, + dme1737_auto_pwm_min_attr[ix]); + if (err) + goto exit_remove; + } + } + } + + /* + * Inform if the device is locked. Otherwise change the permissions of + * selected attributes from read-only to read-writeable. + */ + if (data->config & 0x02) { + dev_info(dev, + "Device is locked. Some attributes will be read-only.\n"); + } else { + /* Change permissions of zone sysfs attributes */ + dme1737_chmod_group(dev, &dme1737_zone_chmod_group, + S_IRUGO | S_IWUSR); + + /* Change permissions of chip-dependent sysfs attributes */ + if (data->has_features & HAS_TEMP_OFFSET) { + dme1737_chmod_group(dev, &dme1737_temp_offset_group, + S_IRUGO | S_IWUSR); + } + if (data->has_features & HAS_ZONE3) { + dme1737_chmod_group(dev, &dme1737_zone3_chmod_group, + S_IRUGO | S_IWUSR); + } + if (data->has_features & HAS_ZONE_HYST) { + dme1737_chmod_group(dev, &dme1737_zone_hyst_group, + S_IRUGO | S_IWUSR); + } + + /* Change permissions of PWM sysfs attributes */ + for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { + if (data->has_features & HAS_PWM(ix)) { + dme1737_chmod_group(dev, + &dme1737_pwm_chmod_group[ix], + S_IRUGO | S_IWUSR); + if ((data->has_features & HAS_PWM_MIN) && + ix < 3) { + dme1737_chmod_file(dev, + dme1737_auto_pwm_min_attr[ix], + S_IRUGO | S_IWUSR); + } + } + } + + /* Change permissions of pwm[1-3] if in manual mode */ + for (ix = 0; ix < 3; ix++) { + if ((data->has_features & HAS_PWM(ix)) && + (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) { + dme1737_chmod_file(dev, + dme1737_pwm_chmod_attr[ix], + S_IRUGO | S_IWUSR); + } + } + } + + return 0; + +exit_remove: + dme1737_remove_files(dev); +exit: + return err; +} + +static int dme1737_init_device(struct device *dev) +{ + struct dme1737_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int ix; + u8 reg; + + /* Point to the right nominal voltages array */ + data->in_nominal = IN_NOMINAL(data->type); + + data->config = dme1737_read(data, DME1737_REG_CONFIG); + /* Inform if part is not monitoring/started */ + if (!(data->config & 0x01)) { + if (!force_start) { + dev_err(dev, + "Device is not monitoring. Use the force_start load parameter to override.\n"); + return -EFAULT; + } + + /* Force monitoring */ + data->config |= 0x01; + dme1737_write(data, DME1737_REG_CONFIG, data->config); + } + /* Inform if part is not ready */ + if (!(data->config & 0x04)) { + dev_err(dev, "Device is not ready.\n"); + return -EFAULT; + } + + /* + * Determine which optional fan and pwm features are enabled (only + * valid for I2C devices) + */ + if (client) { /* I2C chip */ + data->config2 = dme1737_read(data, DME1737_REG_CONFIG2); + /* Check if optional fan3 input is enabled */ + if (data->config2 & 0x04) + data->has_features |= HAS_FAN(2); + + /* + * Fan4 and pwm3 are only available if the client's I2C address + * is the default 0x2e. Otherwise the I/Os associated with + * these functions are used for addr enable/select. + */ + if (client->addr == 0x2e) + data->has_features |= HAS_FAN(3) | HAS_PWM(2); + + /* + * Determine which of the optional fan[5-6] and pwm[5-6] + * features are enabled. For this, we need to query the runtime + * registers through the Super-IO LPC interface. Try both + * config ports 0x2e and 0x4e. + */ + if (dme1737_i2c_get_features(0x2e, data) && + dme1737_i2c_get_features(0x4e, data)) { + dev_warn(dev, + "Failed to query Super-IO for optional features.\n"); + } + } + + /* Fan[1-2] and pwm[1-2] are present in all chips */ + data->has_features |= HAS_FAN(0) | HAS_FAN(1) | HAS_PWM(0) | HAS_PWM(1); + + /* Chip-dependent features */ + switch (data->type) { + case dme1737: + data->has_features |= HAS_TEMP_OFFSET | HAS_VID | HAS_ZONE3 | + HAS_ZONE_HYST | HAS_PWM_MIN; + break; + case sch311x: + data->has_features |= HAS_TEMP_OFFSET | HAS_ZONE3 | + HAS_ZONE_HYST | HAS_PWM_MIN | HAS_FAN(2) | HAS_PWM(2); + break; + case sch5027: + data->has_features |= HAS_ZONE3; + break; + case sch5127: + data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7; + break; + default: + break; + } + + dev_info(dev, + "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n", + (data->has_features & HAS_PWM(2)) ? "yes" : "no", + (data->has_features & HAS_PWM(4)) ? "yes" : "no", + (data->has_features & HAS_PWM(5)) ? "yes" : "no", + (data->has_features & HAS_FAN(2)) ? "yes" : "no", + (data->has_features & HAS_FAN(3)) ? "yes" : "no", + (data->has_features & HAS_FAN(4)) ? "yes" : "no", + (data->has_features & HAS_FAN(5)) ? "yes" : "no"); + + reg = dme1737_read(data, DME1737_REG_TACH_PWM); + /* Inform if fan-to-pwm mapping differs from the default */ + if (client && reg != 0xa4) { /* I2C chip */ + dev_warn(dev, + "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, fan4->pwm%d. %s\n", + (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1, + ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1, + DO_REPORT); + } else if (!client && reg != 0x24) { /* ISA chip */ + dev_warn(dev, + "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. %s\n", + (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1, + ((reg >> 4) & 0x03) + 1, DO_REPORT); + } + + /* + * Switch pwm[1-3] to manual mode if they are currently disabled and + * set the duty-cycles to 0% (which is identical to the PWMs being + * disabled). + */ + if (!(data->config & 0x02)) { + for (ix = 0; ix < 3; ix++) { + data->pwm_config[ix] = dme1737_read(data, + DME1737_REG_PWM_CONFIG(ix)); + if ((data->has_features & HAS_PWM(ix)) && + (PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) { + dev_info(dev, + "Switching pwm%d to manual mode.\n", + ix + 1); + data->pwm_config[ix] = PWM_EN_TO_REG(1, + data->pwm_config[ix]); + dme1737_write(data, DME1737_REG_PWM(ix), 0); + dme1737_write(data, + DME1737_REG_PWM_CONFIG(ix), + data->pwm_config[ix]); + } + } + } + + /* Initialize the default PWM auto channels zone (acz) assignments */ + data->pwm_acz[0] = 1; /* pwm1 -> zone1 */ + data->pwm_acz[1] = 2; /* pwm2 -> zone2 */ + data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ + + /* Set VRM */ + if (data->has_features & HAS_VID) + data->vrm = vid_which_vrm(); + + return 0; +} + +/* --------------------------------------------------------------------- + * I2C device detection and registration + * --------------------------------------------------------------------- */ + +static struct i2c_driver dme1737_i2c_driver; + +static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data) +{ + int err = 0, reg; + u16 addr; + + dme1737_sio_enter(sio_cip); + + /* + * Check device ID + * We currently know about two kinds of DME1737 and SCH5027. + */ + reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); + if (!(reg == DME1737_ID_1 || reg == DME1737_ID_2 || + reg == SCH5027_ID)) { + err = -ENODEV; + goto exit; + } + + /* Select logical device A (runtime registers) */ + dme1737_sio_outb(sio_cip, 0x07, 0x0a); + + /* Get the base address of the runtime registers */ + addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) | + dme1737_sio_inb(sio_cip, 0x61); + if (!addr) { + err = -ENODEV; + goto exit; + } + + /* + * Read the runtime registers to determine which optional features + * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set + * to '10' if the respective feature is enabled. + */ + if ((inb(addr + 0x43) & 0x0c) == 0x08) /* fan6 */ + data->has_features |= HAS_FAN(5); + if ((inb(addr + 0x44) & 0x0c) == 0x08) /* pwm6 */ + data->has_features |= HAS_PWM(5); + if ((inb(addr + 0x45) & 0x0c) == 0x08) /* fan5 */ + data->has_features |= HAS_FAN(4); + if ((inb(addr + 0x46) & 0x0c) == 0x08) /* pwm5 */ + data->has_features |= HAS_PWM(4); + +exit: + dme1737_sio_exit(sio_cip); + + return err; +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int dme1737_i2c_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + struct device *dev = &adapter->dev; + u8 company, verstep = 0; + const char *name; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY); + verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP); + + if (company == DME1737_COMPANY_SMSC && + verstep == SCH5027_VERSTEP) { + name = "sch5027"; + } else if (company == DME1737_COMPANY_SMSC && + (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { + name = "dme1737"; + } else { + return -ENODEV; + } + + dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n", + verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737", + client->addr, verstep); + strscpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static const struct i2c_device_id dme1737_id[]; + +static int dme1737_i2c_probe(struct i2c_client *client) +{ + struct dme1737_data *data; + struct device *dev = &client->dev; + int err; + + data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + data->type = i2c_match_id(dme1737_id, client)->driver_data; + data->client = client; + data->name = client->name; + mutex_init(&data->update_lock); + + /* Initialize the DME1737 chip */ + err = dme1737_init_device(dev); + if (err) { + dev_err(dev, "Failed to initialize device.\n"); + return err; + } + + /* Create sysfs files */ + err = dme1737_create_files(dev); + if (err) { + dev_err(dev, "Failed to create sysfs files.\n"); + return err; + } + + /* Register device */ + data->hwmon_dev = hwmon_device_register(dev); + if (IS_ERR(data->hwmon_dev)) { + dev_err(dev, "Failed to register device.\n"); + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + dme1737_remove_files(dev); + return err; +} + +static void dme1737_i2c_remove(struct i2c_client *client) +{ + struct dme1737_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + dme1737_remove_files(&client->dev); +} + +static const struct i2c_device_id dme1737_id[] = { + { "dme1737", dme1737 }, + { "sch5027", sch5027 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dme1737_id); + +static struct i2c_driver dme1737_i2c_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "dme1737", + }, + .probe_new = dme1737_i2c_probe, + .remove = dme1737_i2c_remove, + .id_table = dme1737_id, + .detect = dme1737_i2c_detect, + .address_list = normal_i2c, +}; + +/* --------------------------------------------------------------------- + * ISA device detection and registration + * --------------------------------------------------------------------- */ + +static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr) +{ + int err = 0, reg; + unsigned short base_addr; + + dme1737_sio_enter(sio_cip); + + /* + * Check device ID + * We currently know about SCH3112, SCH3114, SCH3116, and SCH5127 + */ + reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); + if (!(reg == SCH3112_ID || reg == SCH3114_ID || reg == SCH3116_ID || + reg == SCH5127_ID)) { + err = -ENODEV; + goto exit; + } + + /* Select logical device A (runtime registers) */ + dme1737_sio_outb(sio_cip, 0x07, 0x0a); + + /* Get the base address of the runtime registers */ + base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) | + dme1737_sio_inb(sio_cip, 0x61); + if (!base_addr) { + pr_err("Base address not set\n"); + err = -ENODEV; + goto exit; + } + + /* + * Access to the hwmon registers is through an index/data register + * pair located at offset 0x70/0x71. + */ + *addr = base_addr + 0x70; + +exit: + dme1737_sio_exit(sio_cip); + return err; +} + +static int __init dme1737_isa_device_add(unsigned short addr) +{ + struct resource res = { + .start = addr, + .end = addr + DME1737_EXTENT - 1, + .name = "dme1737", + .flags = IORESOURCE_IO, + }; + int err; + + err = acpi_check_resource_conflict(&res); + if (err) + goto exit; + + pdev = platform_device_alloc("dme1737", addr); + if (!pdev) { + pr_err("Failed to allocate device\n"); + err = -ENOMEM; + goto exit; + } + + err = platform_device_add_resources(pdev, &res, 1); + if (err) { + pr_err("Failed to add device resource (err = %d)\n", err); + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + pr_err("Failed to add device (err = %d)\n", err); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(pdev); + pdev = NULL; +exit: + return err; +} + +static int dme1737_isa_probe(struct platform_device *pdev) +{ + u8 company, device; + struct resource *res; + struct dme1737_data *data; + struct device *dev = &pdev->dev; + int err; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!devm_request_region(dev, res->start, DME1737_EXTENT, "dme1737")) { + dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n", + (unsigned short)res->start, + (unsigned short)res->start + DME1737_EXTENT - 1); + return -EBUSY; + } + + data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->addr = res->start; + platform_set_drvdata(pdev, data); + + /* Skip chip detection if module is loaded with force_id parameter */ + switch (force_id) { + case SCH3112_ID: + case SCH3114_ID: + case SCH3116_ID: + data->type = sch311x; + break; + case SCH5127_ID: + data->type = sch5127; + break; + default: + company = dme1737_read(data, DME1737_REG_COMPANY); + device = dme1737_read(data, DME1737_REG_DEVICE); + + if ((company == DME1737_COMPANY_SMSC) && + (device == SCH311X_DEVICE)) { + data->type = sch311x; + } else if ((company == DME1737_COMPANY_SMSC) && + (device == SCH5127_DEVICE)) { + data->type = sch5127; + } else { + return -ENODEV; + } + } + + if (data->type == sch5127) + data->name = "sch5127"; + else + data->name = "sch311x"; + + /* Initialize the mutex */ + mutex_init(&data->update_lock); + + dev_info(dev, "Found a %s chip at 0x%04x\n", + data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr); + + /* Initialize the chip */ + err = dme1737_init_device(dev); + if (err) { + dev_err(dev, "Failed to initialize device.\n"); + return err; + } + + /* Create sysfs files */ + err = dme1737_create_files(dev); + if (err) { + dev_err(dev, "Failed to create sysfs files.\n"); + return err; + } + + /* Register device */ + data->hwmon_dev = hwmon_device_register(dev); + if (IS_ERR(data->hwmon_dev)) { + dev_err(dev, "Failed to register device.\n"); + err = PTR_ERR(data->hwmon_dev); + goto exit_remove_files; + } + + return 0; + +exit_remove_files: + dme1737_remove_files(dev); + return err; +} + +static int dme1737_isa_remove(struct platform_device *pdev) +{ + struct dme1737_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + dme1737_remove_files(&pdev->dev); + + return 0; +} + +static struct platform_driver dme1737_isa_driver = { + .driver = { + .name = "dme1737", + }, + .probe = dme1737_isa_probe, + .remove = dme1737_isa_remove, +}; + +/* --------------------------------------------------------------------- + * Module initialization and cleanup + * --------------------------------------------------------------------- */ + +static int __init dme1737_init(void) +{ + int err; + unsigned short addr; + + err = i2c_add_driver(&dme1737_i2c_driver); + if (err) + goto exit; + + if (dme1737_isa_detect(0x2e, &addr) && + dme1737_isa_detect(0x4e, &addr) && + (!probe_all_addr || + (dme1737_isa_detect(0x162e, &addr) && + dme1737_isa_detect(0x164e, &addr)))) { + /* Return 0 if we didn't find an ISA device */ + return 0; + } + + err = platform_driver_register(&dme1737_isa_driver); + if (err) + goto exit_del_i2c_driver; + + /* Sets global pdev as a side effect */ + err = dme1737_isa_device_add(addr); + if (err) + goto exit_del_isa_driver; + + return 0; + +exit_del_isa_driver: + platform_driver_unregister(&dme1737_isa_driver); +exit_del_i2c_driver: + i2c_del_driver(&dme1737_i2c_driver); +exit: + return err; +} + +static void __exit dme1737_exit(void) +{ + if (pdev) { + platform_device_unregister(pdev); + platform_driver_unregister(&dme1737_isa_driver); + } + + i2c_del_driver(&dme1737_i2c_driver); +} + +MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>"); +MODULE_DESCRIPTION("DME1737 sensors"); +MODULE_LICENSE("GPL"); + +module_init(dme1737_init); +module_exit(dme1737_exit); |