diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/hwmon/nct6775.h | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h new file mode 100644 index 000000000..be41848c3 --- /dev/null +++ b/drivers/hwmon/nct6775.h @@ -0,0 +1,254 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __HWMON_NCT6775_H__ +#define __HWMON_NCT6775_H__ + +#include <linux/types.h> + +enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, + nct6793, nct6795, nct6796, nct6797, nct6798 }; +enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; + +#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/ +#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */ +#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */ + +#define NUM_REG_ALARM 7 /* Max number of alarm registers */ +#define NUM_REG_BEEP 5 /* Max number of beep registers */ + +#define NUM_FAN 7 + +struct nct6775_data { + int addr; /* IO base of hw monitor block */ + int sioreg; /* SIO register address */ + enum kinds kind; + const char *name; + + const struct attribute_group *groups[7]; + u8 num_groups; + + u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, + * 3=temp_crit, 4=temp_lcrit + */ + u8 temp_src[NUM_TEMP]; + u16 reg_temp_config[NUM_TEMP]; + const char * const *temp_label; + u32 temp_mask; + u32 virt_temp_mask; + + u16 REG_CONFIG; + u16 REG_VBAT; + u16 REG_DIODE; + u8 DIODE_MASK; + + const s8 *ALARM_BITS; + const s8 *BEEP_BITS; + + const u16 *REG_VIN; + const u16 *REG_IN_MINMAX[2]; + + const u16 *REG_TARGET; + const u16 *REG_FAN; + const u16 *REG_FAN_MODE; + const u16 *REG_FAN_MIN; + const u16 *REG_FAN_PULSES; + const u16 *FAN_PULSE_SHIFT; + const u16 *REG_FAN_TIME[3]; + + const u16 *REG_TOLERANCE_H; + + const u8 *REG_PWM_MODE; + const u8 *PWM_MODE_MASK; + + const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, + * [3]=pwm_max, [4]=pwm_step, + * [5]=weight_duty_step, [6]=weight_duty_base + */ + const u16 *REG_PWM_READ; + + const u16 *REG_CRITICAL_PWM_ENABLE; + u8 CRITICAL_PWM_ENABLE_MASK; + const u16 *REG_CRITICAL_PWM; + + const u16 *REG_AUTO_TEMP; + const u16 *REG_AUTO_PWM; + + const u16 *REG_CRITICAL_TEMP; + const u16 *REG_CRITICAL_TEMP_TOLERANCE; + + const u16 *REG_TEMP_SOURCE; /* temp register sources */ + const u16 *REG_TEMP_SEL; + const u16 *REG_WEIGHT_TEMP_SEL; + const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */ + + const u16 *REG_TEMP_OFFSET; + + const u16 *REG_ALARM; + const u16 *REG_BEEP; + + const u16 *REG_TSI_TEMP; + + unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg); + unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg); + + struct mutex update_lock; + bool valid; /* true if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* Register values */ + u8 bank; /* current register bank */ + u8 in_num; /* number of in inputs we have */ + u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ + unsigned int rpm[NUM_FAN]; + u16 fan_min[NUM_FAN]; + u8 fan_pulses[NUM_FAN]; + u8 fan_div[NUM_FAN]; + u8 has_pwm; + u8 has_fan; /* some fan inputs can be disabled */ + u8 has_fan_min; /* some fans don't have min register */ + bool has_fan_div; + + u8 num_temp_alarms; /* 2, 3, or 6 */ + u8 num_temp_beeps; /* 2, 3, or 6 */ + u8 temp_fixed_num; /* 3 or 6 */ + u8 temp_type[NUM_TEMP_FIXED]; + s8 temp_offset[NUM_TEMP_FIXED]; + s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, + * 3=temp_crit, 4=temp_lcrit + */ + s16 tsi_temp[NUM_TSI_TEMP]; + u64 alarms; + u64 beeps; + + u8 pwm_num; /* number of pwm */ + u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage, + * 1->PWM variable duty cycle + */ + enum pwm_enable pwm_enable[NUM_FAN]; + /* 0->off + * 1->manual + * 2->thermal cruise mode (also called SmartFan I) + * 3->fan speed cruise mode + * 4->SmartFan III + * 5->enhanced variable thermal cruise (SmartFan IV) + */ + u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, + * [3]=pwm_max, [4]=pwm_step, + * [5]=weight_duty_step, [6]=weight_duty_base + */ + + u8 target_temp[NUM_FAN]; + u8 target_temp_mask; + u32 target_speed[NUM_FAN]; + u32 target_speed_tolerance[NUM_FAN]; + u8 speed_tolerance_limit; + + u8 temp_tolerance[2][NUM_FAN]; + u8 tolerance_mask; + + u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */ + + /* Automatic fan speed control registers */ + int auto_pwm_num; + u8 auto_pwm[NUM_FAN][7]; + u8 auto_temp[NUM_FAN][7]; + u8 pwm_temp_sel[NUM_FAN]; + u8 pwm_weight_temp_sel[NUM_FAN]; + u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol, + * 2->temp_base + */ + + u8 vid; + u8 vrm; + + bool have_vid; + + u16 have_temp; + u16 have_temp_fixed; + u16 have_tsi_temp; + u16 have_in; + + /* Remember extra register values over suspend/resume */ + u8 vbat; + u8 fandiv1; + u8 fandiv2; + u8 sio_reg_enable; + + struct regmap *regmap; + bool read_only; + + /* driver-specific (platform, i2c) initialization hook and data */ + int (*driver_init)(struct nct6775_data *data); + void *driver_data; +}; + +static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value) +{ + unsigned int tmp; + int ret = regmap_read(data->regmap, reg, &tmp); + + if (!ret) + *value = tmp; + return ret; +} + +static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value) +{ + return regmap_write(data->regmap, reg, value); +} + +struct nct6775_data *nct6775_update_device(struct device *dev); + +bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg); +int nct6775_probe(struct device *dev, struct nct6775_data *data, + const struct regmap_config *regmapcfg); + +ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf); +ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf); +ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf, + size_t count); + +static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value) +{ + if (!nct6775_reg_is_word_sized(data, reg)) + value >>= 8; + return nct6775_write_value(data, reg, value); +} + +static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr) +{ + return data->read_only ? (attr->mode & ~0222) : attr->mode; +} + +static inline int +nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group) +{ + /* Need to leave a NULL terminator at the end of data->groups */ + if (data->num_groups == ARRAY_SIZE(data->groups) - 1) + return -ENOBUFS; + + data->groups[data->num_groups++] = group; + return 0; +} + +#define NCT6775_REG_BANK 0x4E +#define NCT6775_REG_CONFIG 0x40 + +#define NCT6775_REG_FANDIV1 0x506 +#define NCT6775_REG_FANDIV2 0x507 + +#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 + +#define FAN_ALARM_BASE 16 +#define TEMP_ALARM_BASE 24 +#define INTRUSION_ALARM_BASE 30 +#define BEEP_ENABLE_BASE 15 + +/* + * Not currently used: + * REG_MAN_ID has the value 0x5ca3 for all supported chips. + * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. + * REG_MAN_ID is at port 0x4f + * REG_CHIP_ID is at port 0x58 + */ + +#endif /* __HWMON_NCT6775_H__ */ |