summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/nzxt-smart2.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/hwmon/nzxt-smart2.c832
1 files changed, 832 insertions, 0 deletions
diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c
new file mode 100644
index 000000000..a8e72d8fd
--- /dev/null
+++ b/drivers/hwmon/nzxt-smart2.c
@@ -0,0 +1,832 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Reverse-engineered NZXT RGB & Fan Controller/Smart Device v2 driver.
+ *
+ * Copyright (c) 2021 Aleksandr Mezin
+ */
+
+#include <linux/hid.h>
+#include <linux/hwmon.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+/*
+ * The device has only 3 fan channels/connectors. But all HID reports have
+ * space reserved for up to 8 channels.
+ */
+#define FAN_CHANNELS 3
+#define FAN_CHANNELS_MAX 8
+
+#define UPDATE_INTERVAL_DEFAULT_MS 1000
+
+/* These strings match labels on the device exactly */
+static const char *const fan_label[] = {
+ "FAN 1",
+ "FAN 2",
+ "FAN 3",
+};
+
+static const char *const curr_label[] = {
+ "FAN 1 Current",
+ "FAN 2 Current",
+ "FAN 3 Current",
+};
+
+static const char *const in_label[] = {
+ "FAN 1 Voltage",
+ "FAN 2 Voltage",
+ "FAN 3 Voltage",
+};
+
+enum {
+ INPUT_REPORT_ID_FAN_CONFIG = 0x61,
+ INPUT_REPORT_ID_FAN_STATUS = 0x67,
+};
+
+enum {
+ FAN_STATUS_REPORT_SPEED = 0x02,
+ FAN_STATUS_REPORT_VOLTAGE = 0x04,
+};
+
+enum {
+ FAN_TYPE_NONE = 0,
+ FAN_TYPE_DC = 1,
+ FAN_TYPE_PWM = 2,
+};
+
+struct unknown_static_data {
+ /*
+ * Some configuration data? Stays the same after fan speed changes,
+ * changes in fan configuration, reboots and driver reloads.
+ *
+ * The same data in multiple report types.
+ *
+ * Byte 12 seems to be the number of fan channels, but I am not sure.
+ */
+ u8 unknown1[14];
+} __packed;
+
+/*
+ * The device sends this input report in response to "detect fans" command:
+ * a 2-byte output report { 0x60, 0x03 }.
+ */
+struct fan_config_report {
+ /* report_id should be INPUT_REPORT_ID_FAN_CONFIG = 0x61 */
+ u8 report_id;
+ /* Always 0x03 */
+ u8 magic;
+ struct unknown_static_data unknown_data;
+ /* Fan type as detected by the device. See FAN_TYPE_* enum. */
+ u8 fan_type[FAN_CHANNELS_MAX];
+} __packed;
+
+/*
+ * The device sends these reports at a fixed interval (update interval) -
+ * one report with type = FAN_STATUS_REPORT_SPEED, and one report with type =
+ * FAN_STATUS_REPORT_VOLTAGE per update interval.
+ */
+struct fan_status_report {
+ /* report_id should be INPUT_REPORT_ID_STATUS = 0x67 */
+ u8 report_id;
+ /* FAN_STATUS_REPORT_SPEED = 0x02 or FAN_STATUS_REPORT_VOLTAGE = 0x04 */
+ u8 type;
+ struct unknown_static_data unknown_data;
+ /* Fan type as detected by the device. See FAN_TYPE_* enum. */
+ u8 fan_type[FAN_CHANNELS_MAX];
+
+ union {
+ /* When type == FAN_STATUS_REPORT_SPEED */
+ struct {
+ /*
+ * Fan speed, in RPM. Zero for channels without fans
+ * connected.
+ */
+ __le16 fan_rpm[FAN_CHANNELS_MAX];
+ /*
+ * Fan duty cycle, in percent. Non-zero even for
+ * channels without fans connected.
+ */
+ u8 duty_percent[FAN_CHANNELS_MAX];
+ /*
+ * Exactly the same values as duty_percent[], non-zero
+ * for disconnected fans too.
+ */
+ u8 duty_percent_dup[FAN_CHANNELS_MAX];
+ /* "Case Noise" in db */
+ u8 noise_db;
+ } __packed fan_speed;
+ /* When type == FAN_STATUS_REPORT_VOLTAGE */
+ struct {
+ /*
+ * Voltage, in millivolts. Non-zero even when fan is
+ * not connected.
+ */
+ __le16 fan_in[FAN_CHANNELS_MAX];
+ /*
+ * Current, in milliamperes. Near-zero when
+ * disconnected.
+ */
+ __le16 fan_current[FAN_CHANNELS_MAX];
+ } __packed fan_voltage;
+ } __packed;
+} __packed;
+
+#define OUTPUT_REPORT_SIZE 64
+
+enum {
+ OUTPUT_REPORT_ID_INIT_COMMAND = 0x60,
+ OUTPUT_REPORT_ID_SET_FAN_SPEED = 0x62,
+};
+
+enum {
+ INIT_COMMAND_SET_UPDATE_INTERVAL = 0x02,
+ INIT_COMMAND_DETECT_FANS = 0x03,
+};
+
+/*
+ * This output report sets pwm duty cycle/target fan speed for one or more
+ * channels.
+ */
+struct set_fan_speed_report {
+ /* report_id should be OUTPUT_REPORT_ID_SET_FAN_SPEED = 0x62 */
+ u8 report_id;
+ /* Should be 0x01 */
+ u8 magic;
+ /* To change fan speed on i-th channel, set i-th bit here */
+ u8 channel_bit_mask;
+ /*
+ * Fan duty cycle/target speed in percent. For voltage-controlled fans,
+ * the minimal voltage (duty_percent = 1) is about 9V.
+ * Setting duty_percent to 0 (if the channel is selected in
+ * channel_bit_mask) turns off the fan completely (regardless of the
+ * control mode).
+ */
+ u8 duty_percent[FAN_CHANNELS_MAX];
+} __packed;
+
+struct drvdata {
+ struct hid_device *hid;
+ struct device *hwmon;
+
+ u8 fan_duty_percent[FAN_CHANNELS];
+ u16 fan_rpm[FAN_CHANNELS];
+ bool pwm_status_received;
+
+ u16 fan_in[FAN_CHANNELS];
+ u16 fan_curr[FAN_CHANNELS];
+ bool voltage_status_received;
+
+ u8 fan_type[FAN_CHANNELS];
+ bool fan_config_received;
+
+ /*
+ * wq is used to wait for *_received flags to become true.
+ * All accesses to *_received flags and fan_* arrays are performed with
+ * wq.lock held.
+ */
+ wait_queue_head_t wq;
+ /*
+ * mutex is used to:
+ * 1) Prevent concurrent conflicting changes to update interval and pwm
+ * values (after sending an output hid report, the corresponding field
+ * in drvdata must be updated, and only then new output reports can be
+ * sent).
+ * 2) Synchronize access to output_buffer (well, the buffer is here,
+ * because synchronization is necessary anyway - so why not get rid of
+ * a kmalloc?).
+ */
+ struct mutex mutex;
+ long update_interval;
+ u8 output_buffer[OUTPUT_REPORT_SIZE];
+};
+
+static long scale_pwm_value(long val, long orig_max, long new_max)
+{
+ if (val <= 0)
+ return 0;
+
+ /*
+ * Positive values should not become zero: 0 completely turns off the
+ * fan.
+ */
+ return max(1L, DIV_ROUND_CLOSEST(min(val, orig_max) * new_max, orig_max));
+}
+
+static void handle_fan_config_report(struct drvdata *drvdata, void *data, int size)
+{
+ struct fan_config_report *report = data;
+ int i;
+
+ if (size < sizeof(struct fan_config_report))
+ return;
+
+ if (report->magic != 0x03)
+ return;
+
+ spin_lock(&drvdata->wq.lock);
+
+ for (i = 0; i < FAN_CHANNELS; i++)
+ drvdata->fan_type[i] = report->fan_type[i];
+
+ drvdata->fan_config_received = true;
+ wake_up_all_locked(&drvdata->wq);
+ spin_unlock(&drvdata->wq.lock);
+}
+
+static void handle_fan_status_report(struct drvdata *drvdata, void *data, int size)
+{
+ struct fan_status_report *report = data;
+ int i;
+
+ if (size < sizeof(struct fan_status_report))
+ return;
+
+ spin_lock(&drvdata->wq.lock);
+
+ /*
+ * The device sends INPUT_REPORT_ID_FAN_CONFIG = 0x61 report in response
+ * to "detect fans" command. Only accept other data after getting 0x61,
+ * to make sure that fan detection is complete. In particular, fan
+ * detection resets pwm values.
+ */
+ if (!drvdata->fan_config_received) {
+ spin_unlock(&drvdata->wq.lock);
+ return;
+ }
+
+ for (i = 0; i < FAN_CHANNELS; i++) {
+ if (drvdata->fan_type[i] == report->fan_type[i])
+ continue;
+
+ /*
+ * This should not happen (if my expectations about the device
+ * are correct).
+ *
+ * Even if the userspace sends fan detect command through
+ * hidraw, fan config report should arrive first.
+ */
+ hid_warn_once(drvdata->hid,
+ "Fan %d type changed unexpectedly from %d to %d",
+ i, drvdata->fan_type[i], report->fan_type[i]);
+ drvdata->fan_type[i] = report->fan_type[i];
+ }
+
+ switch (report->type) {
+ case FAN_STATUS_REPORT_SPEED:
+ for (i = 0; i < FAN_CHANNELS; i++) {
+ drvdata->fan_rpm[i] =
+ get_unaligned_le16(&report->fan_speed.fan_rpm[i]);
+ drvdata->fan_duty_percent[i] =
+ report->fan_speed.duty_percent[i];
+ }
+
+ drvdata->pwm_status_received = true;
+ wake_up_all_locked(&drvdata->wq);
+ break;
+
+ case FAN_STATUS_REPORT_VOLTAGE:
+ for (i = 0; i < FAN_CHANNELS; i++) {
+ drvdata->fan_in[i] =
+ get_unaligned_le16(&report->fan_voltage.fan_in[i]);
+ drvdata->fan_curr[i] =
+ get_unaligned_le16(&report->fan_voltage.fan_current[i]);
+ }
+
+ drvdata->voltage_status_received = true;
+ wake_up_all_locked(&drvdata->wq);
+ break;
+ }
+
+ spin_unlock(&drvdata->wq.lock);
+}
+
+static umode_t nzxt_smart2_hwmon_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ case hwmon_pwm_enable:
+ return 0644;
+
+ default:
+ return 0444;
+ }
+
+ case hwmon_chip:
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return 0644;
+
+ default:
+ return 0444;
+ }
+
+ default:
+ return 0444;
+ }
+}
+
+static int nzxt_smart2_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct drvdata *drvdata = dev_get_drvdata(dev);
+ int res = -EINVAL;
+
+ if (type == hwmon_chip) {
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ *val = drvdata->update_interval;
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+ spin_lock_irq(&drvdata->wq.lock);
+
+ switch (type) {
+ case hwmon_pwm:
+ /*
+ * fancontrol:
+ * 1) remembers pwm* values when it starts
+ * 2) needs pwm*_enable to be 1 on controlled fans
+ * So make sure we have correct data before allowing pwm* reads.
+ * Returning errors for pwm of fan speed read can even cause
+ * fancontrol to shut down. So the wait is unavoidable.
+ */
+ switch (attr) {
+ case hwmon_pwm_enable:
+ res = wait_event_interruptible_locked_irq(drvdata->wq,
+ drvdata->fan_config_received);
+ if (res)
+ goto unlock;
+
+ *val = drvdata->fan_type[channel] != FAN_TYPE_NONE;
+ break;
+
+ case hwmon_pwm_mode:
+ res = wait_event_interruptible_locked_irq(drvdata->wq,
+ drvdata->fan_config_received);
+ if (res)
+ goto unlock;
+
+ *val = drvdata->fan_type[channel] == FAN_TYPE_PWM;
+ break;
+
+ case hwmon_pwm_input:
+ res = wait_event_interruptible_locked_irq(drvdata->wq,
+ drvdata->pwm_status_received);
+ if (res)
+ goto unlock;
+
+ *val = scale_pwm_value(drvdata->fan_duty_percent[channel],
+ 100, 255);
+ break;
+ }
+ break;
+
+ case hwmon_fan:
+ /*
+ * It's not strictly necessary to wait for *_received in the
+ * remaining cases (fancontrol doesn't care about them). But I'm
+ * doing it to have consistent behavior.
+ */
+ if (attr == hwmon_fan_input) {
+ res = wait_event_interruptible_locked_irq(drvdata->wq,
+ drvdata->pwm_status_received);
+ if (res)
+ goto unlock;
+
+ *val = drvdata->fan_rpm[channel];
+ }
+ break;
+
+ case hwmon_in:
+ if (attr == hwmon_in_input) {
+ res = wait_event_interruptible_locked_irq(drvdata->wq,
+ drvdata->voltage_status_received);
+ if (res)
+ goto unlock;
+
+ *val = drvdata->fan_in[channel];
+ }
+ break;
+
+ case hwmon_curr:
+ if (attr == hwmon_curr_input) {
+ res = wait_event_interruptible_locked_irq(drvdata->wq,
+ drvdata->voltage_status_received);
+ if (res)
+ goto unlock;
+
+ *val = drvdata->fan_curr[channel];
+ }
+ break;
+
+ default:
+ break;
+ }
+
+unlock:
+ spin_unlock_irq(&drvdata->wq.lock);
+ return res;
+}
+
+static int send_output_report(struct drvdata *drvdata, const void *data,
+ size_t data_size)
+{
+ int ret;
+
+ if (data_size > sizeof(drvdata->output_buffer))
+ return -EINVAL;
+
+ memcpy(drvdata->output_buffer, data, data_size);
+
+ if (data_size < sizeof(drvdata->output_buffer))
+ memset(drvdata->output_buffer + data_size, 0,
+ sizeof(drvdata->output_buffer) - data_size);
+
+ ret = hid_hw_output_report(drvdata->hid, drvdata->output_buffer,
+ sizeof(drvdata->output_buffer));
+ return ret < 0 ? ret : 0;
+}
+
+static int set_pwm(struct drvdata *drvdata, int channel, long val)
+{
+ int ret;
+ u8 duty_percent = scale_pwm_value(val, 255, 100);
+
+ struct set_fan_speed_report report = {
+ .report_id = OUTPUT_REPORT_ID_SET_FAN_SPEED,
+ .magic = 1,
+ .channel_bit_mask = 1 << channel
+ };
+
+ ret = mutex_lock_interruptible(&drvdata->mutex);
+ if (ret)
+ return ret;
+
+ report.duty_percent[channel] = duty_percent;
+ ret = send_output_report(drvdata, &report, sizeof(report));
+ if (ret)
+ goto unlock;
+
+ /*
+ * pwmconfig and fancontrol scripts expect pwm writes to take effect
+ * immediately (i. e. read from pwm* sysfs should return the value
+ * written into it). The device seems to always accept pwm values - even
+ * when there is no fan connected - so update pwm status without waiting
+ * for a report, to make pwmconfig and fancontrol happy. Worst case -
+ * if the device didn't accept new pwm value for some reason (never seen
+ * this in practice) - it will be reported incorrectly only until next
+ * update. This avoids "fan stuck" messages from pwmconfig, and
+ * fancontrol setting fan speed to 100% during shutdown.
+ */
+ spin_lock_bh(&drvdata->wq.lock);
+ drvdata->fan_duty_percent[channel] = duty_percent;
+ spin_unlock_bh(&drvdata->wq.lock);
+
+unlock:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+/*
+ * Workaround for fancontrol/pwmconfig trying to write to pwm*_enable even if it
+ * already is 1 and read-only. Otherwise, fancontrol won't restore pwm on
+ * shutdown properly.
+ */
+static int set_pwm_enable(struct drvdata *drvdata, int channel, long val)
+{
+ long expected_val;
+ int res;
+
+ spin_lock_irq(&drvdata->wq.lock);
+
+ res = wait_event_interruptible_locked_irq(drvdata->wq,
+ drvdata->fan_config_received);
+ if (res) {
+ spin_unlock_irq(&drvdata->wq.lock);
+ return res;
+ }
+
+ expected_val = drvdata->fan_type[channel] != FAN_TYPE_NONE;
+
+ spin_unlock_irq(&drvdata->wq.lock);
+
+ return (val == expected_val) ? 0 : -EOPNOTSUPP;
+}
+
+/*
+ * Control byte | Actual update interval in seconds
+ * 0xff | 65.5
+ * 0xf7 | 63.46
+ * 0x7f | 32.74
+ * 0x3f | 16.36
+ * 0x1f | 8.17
+ * 0x0f | 4.07
+ * 0x07 | 2.02
+ * 0x03 | 1.00
+ * 0x02 | 0.744
+ * 0x01 | 0.488
+ * 0x00 | 0.25
+ */
+static u8 update_interval_to_control_byte(long interval)
+{
+ if (interval <= 250)
+ return 0;
+
+ return clamp_val(1 + DIV_ROUND_CLOSEST(interval - 488, 256), 0, 255);
+}
+
+static long control_byte_to_update_interval(u8 control_byte)
+{
+ if (control_byte == 0)
+ return 250;
+
+ return 488 + (control_byte - 1) * 256;
+}
+
+static int set_update_interval(struct drvdata *drvdata, long val)
+{
+ u8 control = update_interval_to_control_byte(val);
+ u8 report[] = {
+ OUTPUT_REPORT_ID_INIT_COMMAND,
+ INIT_COMMAND_SET_UPDATE_INTERVAL,
+ 0x01,
+ 0xe8,
+ control,
+ 0x01,
+ 0xe8,
+ control,
+ };
+ int ret;
+
+ ret = send_output_report(drvdata, report, sizeof(report));
+ if (ret)
+ return ret;
+
+ drvdata->update_interval = control_byte_to_update_interval(control);
+ return 0;
+}
+
+static int init_device(struct drvdata *drvdata, long update_interval)
+{
+ int ret;
+ static const u8 detect_fans_report[] = {
+ OUTPUT_REPORT_ID_INIT_COMMAND,
+ INIT_COMMAND_DETECT_FANS,
+ };
+
+ ret = send_output_report(drvdata, detect_fans_report,
+ sizeof(detect_fans_report));
+ if (ret)
+ return ret;
+
+ return set_update_interval(drvdata, update_interval);
+}
+
+static int nzxt_smart2_hwmon_write(struct device *dev,
+ enum hwmon_sensor_types type, u32 attr,
+ int channel, long val)
+{
+ struct drvdata *drvdata = dev_get_drvdata(dev);
+ int ret;
+
+ switch (type) {
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_enable:
+ return set_pwm_enable(drvdata, channel, val);
+
+ case hwmon_pwm_input:
+ return set_pwm(drvdata, channel, val);
+
+ default:
+ return -EINVAL;
+ }
+
+ case hwmon_chip:
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ ret = mutex_lock_interruptible(&drvdata->mutex);
+ if (ret)
+ return ret;
+
+ ret = set_update_interval(drvdata, val);
+
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+
+ default:
+ return -EINVAL;
+ }
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int nzxt_smart2_hwmon_read_string(struct device *dev,
+ enum hwmon_sensor_types type, u32 attr,
+ int channel, const char **str)
+{
+ switch (type) {
+ case hwmon_fan:
+ *str = fan_label[channel];
+ return 0;
+ case hwmon_curr:
+ *str = curr_label[channel];
+ return 0;
+ case hwmon_in:
+ *str = in_label[channel];
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct hwmon_ops nzxt_smart2_hwmon_ops = {
+ .is_visible = nzxt_smart2_hwmon_is_visible,
+ .read = nzxt_smart2_hwmon_read,
+ .read_string = nzxt_smart2_hwmon_read_string,
+ .write = nzxt_smart2_hwmon_write,
+};
+
+static const struct hwmon_channel_info *nzxt_smart2_channel_info[] = {
+ HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL),
+ HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_MODE | HWMON_PWM_ENABLE,
+ HWMON_PWM_INPUT | HWMON_PWM_MODE | HWMON_PWM_ENABLE,
+ HWMON_PWM_INPUT | HWMON_PWM_MODE | HWMON_PWM_ENABLE),
+ HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL),
+ HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL),
+ HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
+ NULL
+};
+
+static const struct hwmon_chip_info nzxt_smart2_chip_info = {
+ .ops = &nzxt_smart2_hwmon_ops,
+ .info = nzxt_smart2_channel_info,
+};
+
+static int nzxt_smart2_hid_raw_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *data, int size)
+{
+ struct drvdata *drvdata = hid_get_drvdata(hdev);
+ u8 report_id = *data;
+
+ switch (report_id) {
+ case INPUT_REPORT_ID_FAN_CONFIG:
+ handle_fan_config_report(drvdata, data, size);
+ break;
+
+ case INPUT_REPORT_ID_FAN_STATUS:
+ handle_fan_status_report(drvdata, data, size);
+ break;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused nzxt_smart2_hid_reset_resume(struct hid_device *hdev)
+{
+ struct drvdata *drvdata = hid_get_drvdata(hdev);
+
+ /*
+ * Userspace is still frozen (so no concurrent sysfs attribute access
+ * is possible), but raw_event can already be called concurrently.
+ */
+ spin_lock_bh(&drvdata->wq.lock);
+ drvdata->fan_config_received = false;
+ drvdata->pwm_status_received = false;
+ drvdata->voltage_status_received = false;
+ spin_unlock_bh(&drvdata->wq.lock);
+
+ return init_device(drvdata, drvdata->update_interval);
+}
+
+static int nzxt_smart2_hid_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ struct drvdata *drvdata;
+ int ret;
+
+ drvdata = devm_kzalloc(&hdev->dev, sizeof(struct drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->hid = hdev;
+ hid_set_drvdata(hdev, drvdata);
+
+ init_waitqueue_head(&drvdata->wq);
+
+ mutex_init(&drvdata->mutex);
+ devm_add_action(&hdev->dev, (void (*)(void *))mutex_destroy,
+ &drvdata->mutex);
+
+ ret = hid_parse(hdev);
+ if (ret)
+ return ret;
+
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ if (ret)
+ return ret;
+
+ ret = hid_hw_open(hdev);
+ if (ret)
+ goto out_hw_stop;
+
+ hid_device_io_start(hdev);
+
+ init_device(drvdata, UPDATE_INTERVAL_DEFAULT_MS);
+
+ drvdata->hwmon =
+ hwmon_device_register_with_info(&hdev->dev, "nzxtsmart2", drvdata,
+ &nzxt_smart2_chip_info, NULL);
+ if (IS_ERR(drvdata->hwmon)) {
+ ret = PTR_ERR(drvdata->hwmon);
+ goto out_hw_close;
+ }
+
+ return 0;
+
+out_hw_close:
+ hid_hw_close(hdev);
+
+out_hw_stop:
+ hid_hw_stop(hdev);
+ return ret;
+}
+
+static void nzxt_smart2_hid_remove(struct hid_device *hdev)
+{
+ struct drvdata *drvdata = hid_get_drvdata(hdev);
+
+ hwmon_device_unregister(drvdata->hwmon);
+
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id nzxt_smart2_hid_id_table[] = {
+ { HID_USB_DEVICE(0x1e71, 0x2006) }, /* NZXT Smart Device V2 */
+ { HID_USB_DEVICE(0x1e71, 0x200d) }, /* NZXT Smart Device V2 */
+ { HID_USB_DEVICE(0x1e71, 0x200f) }, /* NZXT Smart Device V2 */
+ { HID_USB_DEVICE(0x1e71, 0x2009) }, /* NZXT RGB & Fan Controller */
+ { HID_USB_DEVICE(0x1e71, 0x200e) }, /* NZXT RGB & Fan Controller */
+ { HID_USB_DEVICE(0x1e71, 0x2010) }, /* NZXT RGB & Fan Controller */
+ { HID_USB_DEVICE(0x1e71, 0x2011) }, /* NZXT RGB & Fan Controller (6 RGB) */
+ { HID_USB_DEVICE(0x1e71, 0x2019) }, /* NZXT RGB & Fan Controller (6 RGB) */
+ {},
+};
+
+static struct hid_driver nzxt_smart2_hid_driver = {
+ .name = "nzxt-smart2",
+ .id_table = nzxt_smart2_hid_id_table,
+ .probe = nzxt_smart2_hid_probe,
+ .remove = nzxt_smart2_hid_remove,
+ .raw_event = nzxt_smart2_hid_raw_event,
+#ifdef CONFIG_PM
+ .reset_resume = nzxt_smart2_hid_reset_resume,
+#endif
+};
+
+static int __init nzxt_smart2_init(void)
+{
+ return hid_register_driver(&nzxt_smart2_hid_driver);
+}
+
+static void __exit nzxt_smart2_exit(void)
+{
+ hid_unregister_driver(&nzxt_smart2_hid_driver);
+}
+
+MODULE_DEVICE_TABLE(hid, nzxt_smart2_hid_id_table);
+MODULE_AUTHOR("Aleksandr Mezin <mezin.alexander@gmail.com>");
+MODULE_DESCRIPTION("Driver for NZXT RGB & Fan Controller/Smart Device V2");
+MODULE_LICENSE("GPL");
+
+/*
+ * With module_init()/module_hid_driver() and the driver built into the kernel:
+ *
+ * Driver 'nzxt_smart2' was unable to register with bus_type 'hid' because the
+ * bus was not initialized.
+ */
+late_initcall(nzxt_smart2_init);
+module_exit(nzxt_smart2_exit);