diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/hwmon/pmbus/max20730.c | 788 |
1 files changed, 788 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/max20730.c b/drivers/hwmon/pmbus/max20730.c new file mode 100644 index 000000000..ba39f03c6 --- /dev/null +++ b/drivers/hwmon/pmbus/max20730.c @@ -0,0 +1,788 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for MAX20710, MAX20730, MAX20734, and MAX20743 Integrated, + * Step-Down Switching Regulators + * + * Copyright 2019 Google LLC. + * Copyright 2020 Maxim Integrated + */ + +#include <linux/bits.h> +#include <linux/debugfs.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/pmbus.h> +#include <linux/util_macros.h> +#include "pmbus.h" + +enum chips { + max20710, + max20730, + max20734, + max20743 +}; + +enum { + MAX20730_DEBUGFS_VOUT_MIN = 0, + MAX20730_DEBUGFS_FREQUENCY, + MAX20730_DEBUGFS_PG_DELAY, + MAX20730_DEBUGFS_INTERNAL_GAIN, + MAX20730_DEBUGFS_BOOT_VOLTAGE, + MAX20730_DEBUGFS_OUT_V_RAMP_RATE, + MAX20730_DEBUGFS_OC_PROTECT_MODE, + MAX20730_DEBUGFS_SS_TIMING, + MAX20730_DEBUGFS_IMAX, + MAX20730_DEBUGFS_OPERATION, + MAX20730_DEBUGFS_ON_OFF_CONFIG, + MAX20730_DEBUGFS_SMBALERT_MASK, + MAX20730_DEBUGFS_VOUT_MODE, + MAX20730_DEBUGFS_VOUT_COMMAND, + MAX20730_DEBUGFS_VOUT_MAX, + MAX20730_DEBUGFS_NUM_ENTRIES +}; + +struct max20730_data { + enum chips id; + struct pmbus_driver_info info; + struct mutex lock; /* Used to protect against parallel writes */ + u16 mfr_devset1; + u16 mfr_devset2; + u16 mfr_voutmin; + u32 vout_voltage_divider[2]; +}; + +#define to_max20730_data(x) container_of(x, struct max20730_data, info) + +#define VOLT_FROM_REG(val) DIV_ROUND_CLOSEST((val), 1 << 9) + +#define PMBUS_SMB_ALERT_MASK 0x1B + +#define MAX20730_MFR_VOUT_MIN 0xd1 +#define MAX20730_MFR_DEVSET1 0xd2 +#define MAX20730_MFR_DEVSET2 0xd3 + +#define MAX20730_MFR_VOUT_MIN_MASK GENMASK(9, 0) +#define MAX20730_MFR_VOUT_MIN_BIT_POS 0 + +#define MAX20730_MFR_DEVSET1_RGAIN_MASK (BIT(13) | BIT(14)) +#define MAX20730_MFR_DEVSET1_OTP_MASK (BIT(11) | BIT(12)) +#define MAX20730_MFR_DEVSET1_VBOOT_MASK (BIT(8) | BIT(9)) +#define MAX20730_MFR_DEVSET1_OCP_MASK (BIT(5) | BIT(6)) +#define MAX20730_MFR_DEVSET1_FSW_MASK GENMASK(4, 2) +#define MAX20730_MFR_DEVSET1_TSTAT_MASK (BIT(0) | BIT(1)) + +#define MAX20730_MFR_DEVSET1_RGAIN_BIT_POS 13 +#define MAX20730_MFR_DEVSET1_OTP_BIT_POS 11 +#define MAX20730_MFR_DEVSET1_VBOOT_BIT_POS 8 +#define MAX20730_MFR_DEVSET1_OCP_BIT_POS 5 +#define MAX20730_MFR_DEVSET1_FSW_BIT_POS 2 +#define MAX20730_MFR_DEVSET1_TSTAT_BIT_POS 0 + +#define MAX20730_MFR_DEVSET2_IMAX_MASK GENMASK(10, 8) +#define MAX20730_MFR_DEVSET2_VRATE (BIT(6) | BIT(7)) +#define MAX20730_MFR_DEVSET2_OCPM_MASK BIT(5) +#define MAX20730_MFR_DEVSET2_SS_MASK (BIT(0) | BIT(1)) + +#define MAX20730_MFR_DEVSET2_IMAX_BIT_POS 8 +#define MAX20730_MFR_DEVSET2_VRATE_BIT_POS 6 +#define MAX20730_MFR_DEVSET2_OCPM_BIT_POS 5 +#define MAX20730_MFR_DEVSET2_SS_BIT_POS 0 + +#define DEBUG_FS_DATA_MAX 16 + +struct max20730_debugfs_data { + struct i2c_client *client; + int debugfs_entries[MAX20730_DEBUGFS_NUM_ENTRIES]; +}; + +#define to_psu(x, y) container_of((x), \ + struct max20730_debugfs_data, debugfs_entries[(y)]) + +#ifdef CONFIG_DEBUG_FS +static ssize_t max20730_debugfs_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int ret, len; + int *idxp = file->private_data; + int idx = *idxp; + struct max20730_debugfs_data *psu = to_psu(idxp, idx); + const struct pmbus_driver_info *info; + const struct max20730_data *data; + char tbuf[DEBUG_FS_DATA_MAX] = { 0 }; + u16 val; + + info = pmbus_get_driver_info(psu->client); + data = to_max20730_data(info); + + switch (idx) { + case MAX20730_DEBUGFS_VOUT_MIN: + ret = VOLT_FROM_REG(data->mfr_voutmin * 10000); + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d.%d\n", + ret / 10000, ret % 10000); + break; + case MAX20730_DEBUGFS_FREQUENCY: + val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_FSW_MASK) + >> MAX20730_MFR_DEVSET1_FSW_BIT_POS; + + if (val == 0) + ret = 400; + else if (val == 1) + ret = 500; + else if (val == 2 || val == 3) + ret = 600; + else if (val == 4) + ret = 700; + else if (val == 5) + ret = 800; + else + ret = 900; + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret); + break; + case MAX20730_DEBUGFS_PG_DELAY: + val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_TSTAT_MASK) + >> MAX20730_MFR_DEVSET1_TSTAT_BIT_POS; + + if (val == 0) + len = strlcpy(tbuf, "2000\n", DEBUG_FS_DATA_MAX); + else if (val == 1) + len = strlcpy(tbuf, "125\n", DEBUG_FS_DATA_MAX); + else if (val == 2) + len = strlcpy(tbuf, "62.5\n", DEBUG_FS_DATA_MAX); + else + len = strlcpy(tbuf, "32\n", DEBUG_FS_DATA_MAX); + break; + case MAX20730_DEBUGFS_INTERNAL_GAIN: + val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_RGAIN_MASK) + >> MAX20730_MFR_DEVSET1_RGAIN_BIT_POS; + + if (data->id == max20734) { + /* AN6209 */ + if (val == 0) + len = strlcpy(tbuf, "0.8\n", DEBUG_FS_DATA_MAX); + else if (val == 1) + len = strlcpy(tbuf, "3.2\n", DEBUG_FS_DATA_MAX); + else if (val == 2) + len = strlcpy(tbuf, "1.6\n", DEBUG_FS_DATA_MAX); + else + len = strlcpy(tbuf, "6.4\n", DEBUG_FS_DATA_MAX); + } else if (data->id == max20730 || data->id == max20710) { + /* AN6042 or AN6140 */ + if (val == 0) + len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX); + else if (val == 1) + len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX); + else if (val == 2) + len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX); + else + len = strlcpy(tbuf, "7.2\n", DEBUG_FS_DATA_MAX); + } else if (data->id == max20743) { + /* AN6042 */ + if (val == 0) + len = strlcpy(tbuf, "0.45\n", DEBUG_FS_DATA_MAX); + else if (val == 1) + len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX); + else if (val == 2) + len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX); + else + len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX); + } else { + len = strlcpy(tbuf, "Not supported\n", DEBUG_FS_DATA_MAX); + } + break; + case MAX20730_DEBUGFS_BOOT_VOLTAGE: + val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_VBOOT_MASK) + >> MAX20730_MFR_DEVSET1_VBOOT_BIT_POS; + + if (val == 0) + len = strlcpy(tbuf, "0.6484\n", DEBUG_FS_DATA_MAX); + else if (val == 1) + len = strlcpy(tbuf, "0.8984\n", DEBUG_FS_DATA_MAX); + else if (val == 2) + len = strlcpy(tbuf, "1.0\n", DEBUG_FS_DATA_MAX); + else + len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX); + break; + case MAX20730_DEBUGFS_OUT_V_RAMP_RATE: + val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_VRATE) + >> MAX20730_MFR_DEVSET2_VRATE_BIT_POS; + + if (val == 0) + len = strlcpy(tbuf, "4\n", DEBUG_FS_DATA_MAX); + else if (val == 1) + len = strlcpy(tbuf, "2\n", DEBUG_FS_DATA_MAX); + else if (val == 2) + len = strlcpy(tbuf, "1\n", DEBUG_FS_DATA_MAX); + else + len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX); + break; + case MAX20730_DEBUGFS_OC_PROTECT_MODE: + ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_OCPM_MASK) + >> MAX20730_MFR_DEVSET2_OCPM_BIT_POS; + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret); + break; + case MAX20730_DEBUGFS_SS_TIMING: + val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_SS_MASK) + >> MAX20730_MFR_DEVSET2_SS_BIT_POS; + + if (val == 0) + len = strlcpy(tbuf, "0.75\n", DEBUG_FS_DATA_MAX); + else if (val == 1) + len = strlcpy(tbuf, "1.5\n", DEBUG_FS_DATA_MAX); + else if (val == 2) + len = strlcpy(tbuf, "3\n", DEBUG_FS_DATA_MAX); + else + len = strlcpy(tbuf, "6\n", DEBUG_FS_DATA_MAX); + break; + case MAX20730_DEBUGFS_IMAX: + ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_IMAX_MASK) + >> MAX20730_MFR_DEVSET2_IMAX_BIT_POS; + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret); + break; + case MAX20730_DEBUGFS_OPERATION: + ret = i2c_smbus_read_byte_data(psu->client, PMBUS_OPERATION); + if (ret < 0) + return ret; + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret); + break; + case MAX20730_DEBUGFS_ON_OFF_CONFIG: + ret = i2c_smbus_read_byte_data(psu->client, PMBUS_ON_OFF_CONFIG); + if (ret < 0) + return ret; + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret); + break; + case MAX20730_DEBUGFS_SMBALERT_MASK: + ret = i2c_smbus_read_word_data(psu->client, + PMBUS_SMB_ALERT_MASK); + if (ret < 0) + return ret; + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret); + break; + case MAX20730_DEBUGFS_VOUT_MODE: + ret = i2c_smbus_read_byte_data(psu->client, PMBUS_VOUT_MODE); + if (ret < 0) + return ret; + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret); + break; + case MAX20730_DEBUGFS_VOUT_COMMAND: + ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_COMMAND); + if (ret < 0) + return ret; + + ret = VOLT_FROM_REG(ret * 10000); + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, + "%d.%d\n", ret / 10000, ret % 10000); + break; + case MAX20730_DEBUGFS_VOUT_MAX: + ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_MAX); + if (ret < 0) + return ret; + + ret = VOLT_FROM_REG(ret * 10000); + len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, + "%d.%d\n", ret / 10000, ret % 10000); + break; + default: + len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX); + } + + return simple_read_from_buffer(buf, count, ppos, tbuf, len); +} + +static const struct file_operations max20730_fops = { + .llseek = noop_llseek, + .read = max20730_debugfs_read, + .write = NULL, + .open = simple_open, +}; + +static int max20730_init_debugfs(struct i2c_client *client, + struct max20730_data *data) +{ + int ret, i; + struct dentry *debugfs; + struct dentry *max20730_dir; + struct max20730_debugfs_data *psu; + + ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET2); + if (ret < 0) + return ret; + data->mfr_devset2 = ret; + + ret = i2c_smbus_read_word_data(client, MAX20730_MFR_VOUT_MIN); + if (ret < 0) + return ret; + data->mfr_voutmin = ret; + + psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL); + if (!psu) + return -ENOMEM; + psu->client = client; + + debugfs = pmbus_get_debugfs_dir(client); + if (!debugfs) + return -ENOENT; + + max20730_dir = debugfs_create_dir(client->name, debugfs); + + for (i = 0; i < MAX20730_DEBUGFS_NUM_ENTRIES; ++i) + psu->debugfs_entries[i] = i; + + debugfs_create_file("vout_min", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MIN], + &max20730_fops); + debugfs_create_file("frequency", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_FREQUENCY], + &max20730_fops); + debugfs_create_file("power_good_delay", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_PG_DELAY], + &max20730_fops); + debugfs_create_file("internal_gain", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_INTERNAL_GAIN], + &max20730_fops); + debugfs_create_file("boot_voltage", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_BOOT_VOLTAGE], + &max20730_fops); + debugfs_create_file("out_voltage_ramp_rate", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_OUT_V_RAMP_RATE], + &max20730_fops); + debugfs_create_file("oc_protection_mode", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_OC_PROTECT_MODE], + &max20730_fops); + debugfs_create_file("soft_start_timing", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_SS_TIMING], + &max20730_fops); + debugfs_create_file("imax", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_IMAX], + &max20730_fops); + debugfs_create_file("operation", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_OPERATION], + &max20730_fops); + debugfs_create_file("on_off_config", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_ON_OFF_CONFIG], + &max20730_fops); + debugfs_create_file("smbalert_mask", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_SMBALERT_MASK], + &max20730_fops); + debugfs_create_file("vout_mode", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MODE], + &max20730_fops); + debugfs_create_file("vout_command", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_COMMAND], + &max20730_fops); + debugfs_create_file("vout_max", 0444, max20730_dir, + &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MAX], + &max20730_fops); + + return 0; +} +#else +static int max20730_init_debugfs(struct i2c_client *client, + struct max20730_data *data) +{ + return 0; +} +#endif /* CONFIG_DEBUG_FS */ + +static const struct i2c_device_id max20730_id[]; + +/* + * Convert discreet value to direct data format. Strictly speaking, all passed + * values are constants, so we could do that calculation manually. On the + * downside, that would make the driver more difficult to maintain, so lets + * use this approach. + */ +static u16 val_to_direct(int v, enum pmbus_sensor_classes class, + const struct pmbus_driver_info *info) +{ + int R = info->R[class] - 3; /* take milli-units into account */ + int b = info->b[class] * 1000; + long d; + + d = v * info->m[class] + b; + /* + * R < 0 is true for all callers, so we don't need to bother + * about the R > 0 case. + */ + while (R < 0) { + d = DIV_ROUND_CLOSEST(d, 10); + R++; + } + return (u16)d; +} + +static long direct_to_val(u16 w, enum pmbus_sensor_classes class, + const struct pmbus_driver_info *info) +{ + int R = info->R[class] - 3; + int b = info->b[class] * 1000; + int m = info->m[class]; + long d = (s16)w; + + if (m == 0) + return 0; + + while (R < 0) { + d *= 10; + R++; + } + d = (d - b) / m; + return d; +} + +static u32 max_current[][5] = { + [max20710] = { 6200, 8000, 9700, 11600 }, + [max20730] = { 13000, 16600, 20100, 23600 }, + [max20734] = { 21000, 27000, 32000, 38000 }, + [max20743] = { 18900, 24100, 29200, 34100 }, +}; + +static int max20730_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + const struct max20730_data *data = to_max20730_data(info); + int ret = 0; + u32 max_c; + + switch (reg) { + case PMBUS_OT_FAULT_LIMIT: + switch ((data->mfr_devset1 >> 11) & 0x3) { + case 0x0: + ret = val_to_direct(150000, PSC_TEMPERATURE, info); + break; + case 0x1: + ret = val_to_direct(130000, PSC_TEMPERATURE, info); + break; + default: + ret = -ENODATA; + break; + } + break; + case PMBUS_IOUT_OC_FAULT_LIMIT: + max_c = max_current[data->id][(data->mfr_devset1 >> 5) & 0x3]; + ret = val_to_direct(max_c, PSC_CURRENT_OUT, info); + break; + case PMBUS_READ_VOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret > 0 && data->vout_voltage_divider[0] && data->vout_voltage_divider[1]) { + u64 temp = DIV_ROUND_CLOSEST_ULL((u64)ret * data->vout_voltage_divider[1], + data->vout_voltage_divider[0]); + ret = clamp_val(temp, 0, 0xffff); + } + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + +static int max20730_write_word_data(struct i2c_client *client, int page, + int reg, u16 word) +{ + struct pmbus_driver_info *info; + struct max20730_data *data; + u16 devset1; + int ret = 0; + int idx; + + info = (struct pmbus_driver_info *)pmbus_get_driver_info(client); + data = to_max20730_data(info); + + mutex_lock(&data->lock); + devset1 = data->mfr_devset1; + + switch (reg) { + case PMBUS_OT_FAULT_LIMIT: + devset1 &= ~(BIT(11) | BIT(12)); + if (direct_to_val(word, PSC_TEMPERATURE, info) < 140000) + devset1 |= BIT(11); + break; + case PMBUS_IOUT_OC_FAULT_LIMIT: + devset1 &= ~(BIT(5) | BIT(6)); + + idx = find_closest(direct_to_val(word, PSC_CURRENT_OUT, info), + max_current[data->id], 4); + devset1 |= (idx << 5); + break; + default: + ret = -ENODATA; + break; + } + + if (!ret && devset1 != data->mfr_devset1) { + ret = i2c_smbus_write_word_data(client, MAX20730_MFR_DEVSET1, + devset1); + if (!ret) { + data->mfr_devset1 = devset1; + pmbus_clear_cache(client); + } + } + mutex_unlock(&data->lock); + return ret; +} + +static const struct pmbus_driver_info max20730_info[] = { + [max20710] = { + .pages = 1, + .read_word_data = max20730_read_word_data, + .write_word_data = max20730_write_word_data, + + /* Source : Maxim AN6140 and AN6042 */ + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 21, + .b[PSC_TEMPERATURE] = 5887, + .R[PSC_TEMPERATURE] = -1, + + .format[PSC_VOLTAGE_IN] = direct, + .m[PSC_VOLTAGE_IN] = 3609, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -2, + + .format[PSC_CURRENT_OUT] = direct, + .m[PSC_CURRENT_OUT] = 153, + .b[PSC_CURRENT_OUT] = 4976, + .R[PSC_CURRENT_OUT] = -1, + + .format[PSC_VOLTAGE_OUT] = linear, + + .func[0] = PMBUS_HAVE_VIN | + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_STATUS_INPUT, + }, + [max20730] = { + .pages = 1, + .read_word_data = max20730_read_word_data, + .write_word_data = max20730_write_word_data, + + /* Source : Maxim AN6042 */ + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 21, + .b[PSC_TEMPERATURE] = 5887, + .R[PSC_TEMPERATURE] = -1, + + .format[PSC_VOLTAGE_IN] = direct, + .m[PSC_VOLTAGE_IN] = 3609, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -2, + + /* + * Values in the datasheet are adjusted for temperature and + * for the relationship between Vin and Vout. + * Unfortunately, the data sheet suggests that Vout measurement + * may be scaled with a resistor array. This is indeed the case + * at least on the evaulation boards. As a result, any in-driver + * adjustments would either be wrong or require elaborate means + * to configure the scaling. Instead of doing that, just report + * raw values and let userspace handle adjustments. + */ + .format[PSC_CURRENT_OUT] = direct, + .m[PSC_CURRENT_OUT] = 153, + .b[PSC_CURRENT_OUT] = 4976, + .R[PSC_CURRENT_OUT] = -1, + + .format[PSC_VOLTAGE_OUT] = linear, + + .func[0] = PMBUS_HAVE_VIN | + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_STATUS_INPUT, + }, + [max20734] = { + .pages = 1, + .read_word_data = max20730_read_word_data, + .write_word_data = max20730_write_word_data, + + /* Source : Maxim AN6209 */ + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 21, + .b[PSC_TEMPERATURE] = 5887, + .R[PSC_TEMPERATURE] = -1, + + .format[PSC_VOLTAGE_IN] = direct, + .m[PSC_VOLTAGE_IN] = 3592, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -2, + + .format[PSC_CURRENT_OUT] = direct, + .m[PSC_CURRENT_OUT] = 111, + .b[PSC_CURRENT_OUT] = 3461, + .R[PSC_CURRENT_OUT] = -1, + + .format[PSC_VOLTAGE_OUT] = linear, + + .func[0] = PMBUS_HAVE_VIN | + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_STATUS_INPUT, + }, + [max20743] = { + .pages = 1, + .read_word_data = max20730_read_word_data, + .write_word_data = max20730_write_word_data, + + /* Source : Maxim AN6042 */ + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 21, + .b[PSC_TEMPERATURE] = 5887, + .R[PSC_TEMPERATURE] = -1, + + .format[PSC_VOLTAGE_IN] = direct, + .m[PSC_VOLTAGE_IN] = 3597, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -2, + + .format[PSC_CURRENT_OUT] = direct, + .m[PSC_CURRENT_OUT] = 95, + .b[PSC_CURRENT_OUT] = 5014, + .R[PSC_CURRENT_OUT] = -1, + + .format[PSC_VOLTAGE_OUT] = linear, + + .func[0] = PMBUS_HAVE_VIN | + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_STATUS_INPUT, + }, +}; + +static int max20730_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + u8 buf[I2C_SMBUS_BLOCK_MAX + 1]; + struct max20730_data *data; + enum chips chip_id; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_READ_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); + if (ret < 0) { + dev_err(&client->dev, "Failed to read Manufacturer ID\n"); + return ret; + } + if (ret != 5 || strncmp(buf, "MAXIM", 5)) { + buf[ret] = '\0'; + dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf); + return -ENODEV; + } + + /* + * The chips support reading PMBUS_MFR_MODEL. On both MAX20730 + * and MAX20734, reading it returns M20743. Presumably that is + * the reason why the command is not documented. Unfortunately, + * that means that there is no reliable means to detect the chip. + * However, we can at least detect the chip series. Compare + * the returned value against 'M20743' and bail out if there is + * a mismatch. If that doesn't work for all chips, we may have + * to remove this check. + */ + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); + if (ret < 0) { + dev_err(dev, "Failed to read Manufacturer Model\n"); + return ret; + } + if (ret != 6 || strncmp(buf, "M20743", 6)) { + buf[ret] = '\0'; + dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf); + return -ENODEV; + } + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_REVISION, buf); + if (ret < 0) { + dev_err(dev, "Failed to read Manufacturer Revision\n"); + return ret; + } + if (ret != 1 || buf[0] != 'F') { + buf[ret] = '\0'; + dev_err(dev, "Unsupported Manufacturer Revision '%s'\n", buf); + return -ENODEV; + } + + if (client->dev.of_node) + chip_id = (enum chips)of_device_get_match_data(dev); + else + chip_id = i2c_match_id(max20730_id, client)->driver_data; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + data->id = chip_id; + mutex_init(&data->lock); + memcpy(&data->info, &max20730_info[chip_id], sizeof(data->info)); + if (of_property_read_u32_array(client->dev.of_node, "vout-voltage-divider", + data->vout_voltage_divider, + ARRAY_SIZE(data->vout_voltage_divider)) != 0) + memset(data->vout_voltage_divider, 0, sizeof(data->vout_voltage_divider)); + if (data->vout_voltage_divider[1] < data->vout_voltage_divider[0]) { + dev_err(dev, + "The total resistance of voltage divider is less than output resistance\n"); + return -EINVAL; + } + + ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET1); + if (ret < 0) + return ret; + data->mfr_devset1 = ret; + + ret = pmbus_do_probe(client, &data->info); + if (ret < 0) + return ret; + + ret = max20730_init_debugfs(client, data); + if (ret) + dev_warn(dev, "Failed to register debugfs: %d\n", + ret); + + return 0; +} + +static const struct i2c_device_id max20730_id[] = { + { "max20710", max20710 }, + { "max20730", max20730 }, + { "max20734", max20734 }, + { "max20743", max20743 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, max20730_id); + +static const struct of_device_id max20730_of_match[] = { + { .compatible = "maxim,max20710", .data = (void *)max20710 }, + { .compatible = "maxim,max20730", .data = (void *)max20730 }, + { .compatible = "maxim,max20734", .data = (void *)max20734 }, + { .compatible = "maxim,max20743", .data = (void *)max20743 }, + { }, +}; + +MODULE_DEVICE_TABLE(of, max20730_of_match); + +static struct i2c_driver max20730_driver = { + .driver = { + .name = "max20730", + .of_match_table = max20730_of_match, + }, + .probe_new = max20730_probe, + .id_table = max20730_id, +}; + +module_i2c_driver(max20730_driver); + +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); +MODULE_DESCRIPTION("PMBus driver for Maxim MAX20710 / MAX20730 / MAX20734 / MAX20743"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); |