summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/w83795.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/hwmon/w83795.c2271
1 files changed, 2271 insertions, 0 deletions
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
new file mode 100644
index 000000000..84ff5c57e
--- /dev/null
+++ b/drivers/hwmon/w83795.c
@@ -0,0 +1,2271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * w83795.c - Linux kernel driver for hardware monitoring
+ * Copyright (C) 2008 Nuvoton Technology Corp.
+ * Wei Song
+ * Copyright (C) 2010 Jean Delvare <jdelvare@suse.de>
+ *
+ * Supports following chips:
+ *
+ * Chip #vin #fanin #pwm #temp #dts wchipid vendid i2c ISA
+ * w83795g 21 14 8 6 8 0x79 0x5ca3 yes no
+ * w83795adg 18 14 2 6 8 0x79 0x5ca3 yes no
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+#include <linux/util_macros.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = {
+ 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
+};
+
+
+static bool reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
+
+
+#define W83795_REG_BANKSEL 0x00
+#define W83795_REG_VENDORID 0xfd
+#define W83795_REG_CHIPID 0xfe
+#define W83795_REG_DEVICEID 0xfb
+#define W83795_REG_DEVICEID_A 0xff
+
+#define W83795_REG_I2C_ADDR 0xfc
+#define W83795_REG_CONFIG 0x01
+#define W83795_REG_CONFIG_CONFIG48 0x04
+#define W83795_REG_CONFIG_START 0x01
+
+/* Multi-Function Pin Ctrl Registers */
+#define W83795_REG_VOLT_CTRL1 0x02
+#define W83795_REG_VOLT_CTRL2 0x03
+#define W83795_REG_TEMP_CTRL1 0x04
+#define W83795_REG_TEMP_CTRL2 0x05
+#define W83795_REG_FANIN_CTRL1 0x06
+#define W83795_REG_FANIN_CTRL2 0x07
+#define W83795_REG_VMIGB_CTRL 0x08
+
+#define TEMP_READ 0
+#define TEMP_CRIT 1
+#define TEMP_CRIT_HYST 2
+#define TEMP_WARN 3
+#define TEMP_WARN_HYST 4
+/*
+ * only crit and crit_hyst affect real-time alarm status
+ * current crit crit_hyst warn warn_hyst
+ */
+static const u16 W83795_REG_TEMP[][5] = {
+ {0x21, 0x96, 0x97, 0x98, 0x99}, /* TD1/TR1 */
+ {0x22, 0x9a, 0x9b, 0x9c, 0x9d}, /* TD2/TR2 */
+ {0x23, 0x9e, 0x9f, 0xa0, 0xa1}, /* TD3/TR3 */
+ {0x24, 0xa2, 0xa3, 0xa4, 0xa5}, /* TD4/TR4 */
+ {0x1f, 0xa6, 0xa7, 0xa8, 0xa9}, /* TR5 */
+ {0x20, 0xaa, 0xab, 0xac, 0xad}, /* TR6 */
+};
+
+#define IN_READ 0
+#define IN_MAX 1
+#define IN_LOW 2
+static const u16 W83795_REG_IN[][3] = {
+ /* Current, HL, LL */
+ {0x10, 0x70, 0x71}, /* VSEN1 */
+ {0x11, 0x72, 0x73}, /* VSEN2 */
+ {0x12, 0x74, 0x75}, /* VSEN3 */
+ {0x13, 0x76, 0x77}, /* VSEN4 */
+ {0x14, 0x78, 0x79}, /* VSEN5 */
+ {0x15, 0x7a, 0x7b}, /* VSEN6 */
+ {0x16, 0x7c, 0x7d}, /* VSEN7 */
+ {0x17, 0x7e, 0x7f}, /* VSEN8 */
+ {0x18, 0x80, 0x81}, /* VSEN9 */
+ {0x19, 0x82, 0x83}, /* VSEN10 */
+ {0x1A, 0x84, 0x85}, /* VSEN11 */
+ {0x1B, 0x86, 0x87}, /* VTT */
+ {0x1C, 0x88, 0x89}, /* 3VDD */
+ {0x1D, 0x8a, 0x8b}, /* 3VSB */
+ {0x1E, 0x8c, 0x8d}, /* VBAT */
+ {0x1F, 0xa6, 0xa7}, /* VSEN12 */
+ {0x20, 0xaa, 0xab}, /* VSEN13 */
+ {0x21, 0x96, 0x97}, /* VSEN14 */
+ {0x22, 0x9a, 0x9b}, /* VSEN15 */
+ {0x23, 0x9e, 0x9f}, /* VSEN16 */
+ {0x24, 0xa2, 0xa3}, /* VSEN17 */
+};
+#define W83795_REG_VRLSB 0x3C
+
+static const u8 W83795_REG_IN_HL_LSB[] = {
+ 0x8e, /* VSEN1-4 */
+ 0x90, /* VSEN5-8 */
+ 0x92, /* VSEN9-11 */
+ 0x94, /* VTT, 3VDD, 3VSB, 3VBAT */
+ 0xa8, /* VSEN12 */
+ 0xac, /* VSEN13 */
+ 0x98, /* VSEN14 */
+ 0x9c, /* VSEN15 */
+ 0xa0, /* VSEN16 */
+ 0xa4, /* VSEN17 */
+};
+
+#define IN_LSB_REG(index, type) \
+ (((type) == 1) ? W83795_REG_IN_HL_LSB[(index)] \
+ : (W83795_REG_IN_HL_LSB[(index)] + 1))
+
+#define IN_LSB_SHIFT 0
+#define IN_LSB_IDX 1
+static const u8 IN_LSB_SHIFT_IDX[][2] = {
+ /* High/Low LSB shift, LSB No. */
+ {0x00, 0x00}, /* VSEN1 */
+ {0x02, 0x00}, /* VSEN2 */
+ {0x04, 0x00}, /* VSEN3 */
+ {0x06, 0x00}, /* VSEN4 */
+ {0x00, 0x01}, /* VSEN5 */
+ {0x02, 0x01}, /* VSEN6 */
+ {0x04, 0x01}, /* VSEN7 */
+ {0x06, 0x01}, /* VSEN8 */
+ {0x00, 0x02}, /* VSEN9 */
+ {0x02, 0x02}, /* VSEN10 */
+ {0x04, 0x02}, /* VSEN11 */
+ {0x00, 0x03}, /* VTT */
+ {0x02, 0x03}, /* 3VDD */
+ {0x04, 0x03}, /* 3VSB */
+ {0x06, 0x03}, /* VBAT */
+ {0x06, 0x04}, /* VSEN12 */
+ {0x06, 0x05}, /* VSEN13 */
+ {0x06, 0x06}, /* VSEN14 */
+ {0x06, 0x07}, /* VSEN15 */
+ {0x06, 0x08}, /* VSEN16 */
+ {0x06, 0x09}, /* VSEN17 */
+};
+
+
+#define W83795_REG_FAN(index) (0x2E + (index))
+#define W83795_REG_FAN_MIN_HL(index) (0xB6 + (index))
+#define W83795_REG_FAN_MIN_LSB(index) (0xC4 + (index) / 2)
+#define W83795_REG_FAN_MIN_LSB_SHIFT(index) \
+ (((index) & 1) ? 4 : 0)
+
+#define W83795_REG_VID_CTRL 0x6A
+
+#define W83795_REG_ALARM_CTRL 0x40
+#define ALARM_CTRL_RTSACS (1 << 7)
+#define W83795_REG_ALARM(index) (0x41 + (index))
+#define W83795_REG_CLR_CHASSIS 0x4D
+#define W83795_REG_BEEP(index) (0x50 + (index))
+
+#define W83795_REG_OVT_CFG 0x58
+#define OVT_CFG_SEL (1 << 7)
+
+
+#define W83795_REG_FCMS1 0x201
+#define W83795_REG_FCMS2 0x208
+#define W83795_REG_TFMR(index) (0x202 + (index))
+#define W83795_REG_FOMC 0x20F
+
+#define W83795_REG_TSS(index) (0x209 + (index))
+
+#define TSS_MAP_RESERVED 0xff
+static const u8 tss_map[4][6] = {
+ { 0, 1, 2, 3, 4, 5},
+ { 6, 7, 8, 9, 0, 1},
+ {10, 11, 12, 13, 2, 3},
+ { 4, 5, 4, 5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
+#define PWM_OUTPUT 0
+#define PWM_FREQ 1
+#define PWM_START 2
+#define PWM_NONSTOP 3
+#define PWM_STOP_TIME 4
+#define W83795_REG_PWM(index, nr) (0x210 + (nr) * 8 + (index))
+
+#define W83795_REG_FTSH(index) (0x240 + (index) * 2)
+#define W83795_REG_FTSL(index) (0x241 + (index) * 2)
+#define W83795_REG_TFTS 0x250
+
+#define TEMP_PWM_TTTI 0
+#define TEMP_PWM_CTFS 1
+#define TEMP_PWM_HCT 2
+#define TEMP_PWM_HOT 3
+#define W83795_REG_TTTI(index) (0x260 + (index))
+#define W83795_REG_CTFS(index) (0x268 + (index))
+#define W83795_REG_HT(index) (0x270 + (index))
+
+#define SF4_TEMP 0
+#define SF4_PWM 1
+#define W83795_REG_SF4_TEMP(temp_num, index) \
+ (0x280 + 0x10 * (temp_num) + (index))
+#define W83795_REG_SF4_PWM(temp_num, index) \
+ (0x288 + 0x10 * (temp_num) + (index))
+
+#define W83795_REG_DTSC 0x301
+#define W83795_REG_DTSE 0x302
+#define W83795_REG_DTS(index) (0x26 + (index))
+#define W83795_REG_PECI_TBASE(index) (0x320 + (index))
+
+#define DTS_CRIT 0
+#define DTS_CRIT_HYST 1
+#define DTS_WARN 2
+#define DTS_WARN_HYST 3
+#define W83795_REG_DTS_EXT(index) (0xB2 + (index))
+
+#define SETUP_PWM_DEFAULT 0
+#define SETUP_PWM_UPTIME 1
+#define SETUP_PWM_DOWNTIME 2
+#define W83795_REG_SETUP_PWM(index) (0x20C + (index))
+
+static inline u16 in_from_reg(u8 index, u16 val)
+{
+ /* 3VDD, 3VSB and VBAT: 6 mV/bit; other inputs: 2 mV/bit */
+ if (index >= 12 && index <= 14)
+ return val * 6;
+ else
+ return val * 2;
+}
+
+static inline u16 in_to_reg(u8 index, u16 val)
+{
+ if (index >= 12 && index <= 14)
+ return val / 6;
+ else
+ return val / 2;
+}
+
+static inline unsigned long fan_from_reg(u16 val)
+{
+ if ((val == 0xfff) || (val == 0))
+ return 0;
+ return 1350000UL / val;
+}
+
+static inline u16 fan_to_reg(long rpm)
+{
+ if (rpm <= 0)
+ return 0x0fff;
+ return clamp_val((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+}
+
+static inline unsigned long time_from_reg(u8 reg)
+{
+ return reg * 100;
+}
+
+static inline u8 time_to_reg(unsigned long val)
+{
+ return clamp_val((val + 50) / 100, 0, 0xff);
+}
+
+static inline long temp_from_reg(s8 reg)
+{
+ return reg * 1000;
+}
+
+static inline s8 temp_to_reg(long val, s8 min, s8 max)
+{
+ return clamp_val(val / 1000, min, max);
+}
+
+static const u16 pwm_freq_cksel0[16] = {
+ 1024, 512, 341, 256, 205, 171, 146, 128,
+ 85, 64, 32, 16, 8, 4, 2, 1
+};
+
+static unsigned int pwm_freq_from_reg(u8 reg, u16 clkin)
+{
+ unsigned long base_clock;
+
+ if (reg & 0x80) {
+ base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
+ return base_clock / ((reg & 0x7f) + 1);
+ } else
+ return pwm_freq_cksel0[reg & 0x0f];
+}
+
+static u8 pwm_freq_to_reg(unsigned long val, u16 clkin)
+{
+ unsigned long base_clock;
+ u8 reg0, reg1;
+ unsigned long best0, best1;
+
+ /* Best fit for cksel = 0 */
+ reg0 = find_closest_descending(val, pwm_freq_cksel0,
+ ARRAY_SIZE(pwm_freq_cksel0));
+ if (val < 375) /* cksel = 1 can't beat this */
+ return reg0;
+ best0 = pwm_freq_cksel0[reg0];
+
+ /* Best fit for cksel = 1 */
+ base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
+ reg1 = clamp_val(DIV_ROUND_CLOSEST(base_clock, val), 1, 128);
+ best1 = base_clock / reg1;
+ reg1 = 0x80 | (reg1 - 1);
+
+ /* Choose the closest one */
+ if (abs(val - best0) > abs(val - best1))
+ return reg1;
+ else
+ return reg0;
+}
+
+enum chip_types {w83795g, w83795adg};
+
+struct w83795_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ unsigned long last_updated; /* In jiffies */
+ enum chip_types chip_type;
+
+ u8 bank;
+
+ u32 has_in; /* Enable monitor VIN or not */
+ u8 has_dyn_in; /* Only in2-0 can have this */
+ u16 in[21][3]; /* Register value, read/high/low */
+ u8 in_lsb[10][3]; /* LSB Register value, high/low */
+ u8 has_gain; /* has gain: in17-20 * 8 */
+
+ u16 has_fan; /* Enable fan14-1 or not */
+ u16 fan[14]; /* Register value combine */
+ u16 fan_min[14]; /* Register value combine */
+
+ u8 has_temp; /* Enable monitor temp6-1 or not */
+ s8 temp[6][5]; /* current, crit, crit_hyst, warn, warn_hyst */
+ u8 temp_read_vrlsb[6];
+ u8 temp_mode; /* Bit vector, 0 = TR, 1 = TD */
+ u8 temp_src[3]; /* Register value */
+
+ u8 enable_dts; /*
+ * Enable PECI and SB-TSI,
+ * bit 0: =1 enable, =0 disable,
+ * bit 1: =1 AMD SB-TSI, =0 Intel PECI
+ */
+ u8 has_dts; /* Enable monitor DTS temp */
+ s8 dts[8]; /* Register value */
+ u8 dts_read_vrlsb[8]; /* Register value */
+ s8 dts_ext[4]; /* Register value */
+
+ u8 has_pwm; /*
+ * 795g supports 8 pwm, 795adg only supports 2,
+ * no config register, only affected by chip
+ * type
+ */
+ u8 pwm[8][5]; /*
+ * Register value, output, freq, start,
+ * non stop, stop time
+ */
+ u16 clkin; /* CLKIN frequency in kHz */
+ u8 pwm_fcms[2]; /* Register value */
+ u8 pwm_tfmr[6]; /* Register value */
+ u8 pwm_fomc; /* Register value */
+
+ u16 target_speed[8]; /*
+ * Register value, target speed for speed
+ * cruise
+ */
+ u8 tol_speed; /* tolerance of target speed */
+ u8 pwm_temp[6][4]; /* TTTI, CTFS, HCT, HOT */
+ u8 sf4_reg[6][2][7]; /* 6 temp, temp/dcpwm, 7 registers */
+
+ u8 setup_pwm[3]; /* Register value */
+
+ u8 alarms[6]; /* Register value */
+ u8 enable_beep;
+ u8 beeps[6]; /* Register value */
+
+ bool valid;
+ char valid_limits;
+ char valid_pwm_config;
+};
+
+/*
+ * Hardware access
+ * We assume that nobdody can change the bank outside the driver.
+ */
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83795_set_bank(struct i2c_client *client, u8 bank)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+ int err;
+
+ /* If the same bank is already set, nothing to do */
+ if ((data->bank & 0x07) == bank)
+ return 0;
+
+ /* Change to new bank, preserve all other bits */
+ bank |= data->bank & ~0x07;
+ err = i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, bank);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Failed to set bank to %d, err %d\n",
+ (int)bank, err);
+ return err;
+ }
+ data->bank = bank;
+
+ return 0;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static u8 w83795_read(struct i2c_client *client, u16 reg)
+{
+ int err;
+
+ err = w83795_set_bank(client, reg >> 8);
+ if (err < 0)
+ return 0x00; /* Arbitrary */
+
+ err = i2c_smbus_read_byte_data(client, reg & 0xff);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Failed to read from register 0x%03x, err %d\n",
+ (int)reg, err);
+ return 0x00; /* Arbitrary */
+ }
+ return err;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83795_write(struct i2c_client *client, u16 reg, u8 value)
+{
+ int err;
+
+ err = w83795_set_bank(client, reg >> 8);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(client, reg & 0xff, value);
+ if (err < 0)
+ dev_err(&client->dev,
+ "Failed to write to register 0x%03x, err %d\n",
+ (int)reg, err);
+ return err;
+}
+
+static void w83795_update_limits(struct i2c_client *client)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+ int i, limit;
+ u8 lsb;
+
+ /* Read the voltage limits */
+ for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+ if (!(data->has_in & (1 << i)))
+ continue;
+ data->in[i][IN_MAX] =
+ w83795_read(client, W83795_REG_IN[i][IN_MAX]);
+ data->in[i][IN_LOW] =
+ w83795_read(client, W83795_REG_IN[i][IN_LOW]);
+ }
+ for (i = 0; i < ARRAY_SIZE(data->in_lsb); i++) {
+ if ((i == 2 && data->chip_type == w83795adg) ||
+ (i >= 4 && !(data->has_in & (1 << (i + 11)))))
+ continue;
+ data->in_lsb[i][IN_MAX] =
+ w83795_read(client, IN_LSB_REG(i, IN_MAX));
+ data->in_lsb[i][IN_LOW] =
+ w83795_read(client, IN_LSB_REG(i, IN_LOW));
+ }
+
+ /* Read the fan limits */
+ lsb = 0; /* Silent false gcc warning */
+ for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ /*
+ * Each register contains LSB for 2 fans, but we want to
+ * read it only once to save time
+ */
+ if ((i & 1) == 0 && (data->has_fan & (3 << i)))
+ lsb = w83795_read(client, W83795_REG_FAN_MIN_LSB(i));
+
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ data->fan_min[i] =
+ w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4;
+ data->fan_min[i] |=
+ (lsb >> W83795_REG_FAN_MIN_LSB_SHIFT(i)) & 0x0F;
+ }
+
+ /* Read the temperature limits */
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
+ for (limit = TEMP_CRIT; limit <= TEMP_WARN_HYST; limit++)
+ data->temp[i][limit] =
+ w83795_read(client, W83795_REG_TEMP[i][limit]);
+ }
+
+ /* Read the DTS limits */
+ if (data->enable_dts) {
+ for (limit = DTS_CRIT; limit <= DTS_WARN_HYST; limit++)
+ data->dts_ext[limit] =
+ w83795_read(client, W83795_REG_DTS_EXT(limit));
+ }
+
+ /* Read beep settings */
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+ data->beeps[i] =
+ w83795_read(client, W83795_REG_BEEP(i));
+ }
+
+ data->valid_limits = 1;
+}
+
+static struct w83795_data *w83795_update_pwm_config(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ int i, tmp;
+
+ mutex_lock(&data->update_lock);
+
+ if (data->valid_pwm_config)
+ goto END;
+
+ /* Read temperature source selection */
+ for (i = 0; i < ARRAY_SIZE(data->temp_src); i++)
+ data->temp_src[i] = w83795_read(client, W83795_REG_TSS(i));
+
+ /* Read automatic fan speed control settings */
+ data->pwm_fcms[0] = w83795_read(client, W83795_REG_FCMS1);
+ data->pwm_fcms[1] = w83795_read(client, W83795_REG_FCMS2);
+ for (i = 0; i < ARRAY_SIZE(data->pwm_tfmr); i++)
+ data->pwm_tfmr[i] = w83795_read(client, W83795_REG_TFMR(i));
+ data->pwm_fomc = w83795_read(client, W83795_REG_FOMC);
+ for (i = 0; i < data->has_pwm; i++) {
+ for (tmp = PWM_FREQ; tmp <= PWM_STOP_TIME; tmp++)
+ data->pwm[i][tmp] =
+ w83795_read(client, W83795_REG_PWM(i, tmp));
+ }
+ for (i = 0; i < ARRAY_SIZE(data->target_speed); i++) {
+ data->target_speed[i] =
+ w83795_read(client, W83795_REG_FTSH(i)) << 4;
+ data->target_speed[i] |=
+ w83795_read(client, W83795_REG_FTSL(i)) >> 4;
+ }
+ data->tol_speed = w83795_read(client, W83795_REG_TFTS) & 0x3f;
+
+ for (i = 0; i < ARRAY_SIZE(data->pwm_temp); i++) {
+ data->pwm_temp[i][TEMP_PWM_TTTI] =
+ w83795_read(client, W83795_REG_TTTI(i)) & 0x7f;
+ data->pwm_temp[i][TEMP_PWM_CTFS] =
+ w83795_read(client, W83795_REG_CTFS(i));
+ tmp = w83795_read(client, W83795_REG_HT(i));
+ data->pwm_temp[i][TEMP_PWM_HCT] = tmp >> 4;
+ data->pwm_temp[i][TEMP_PWM_HOT] = tmp & 0x0f;
+ }
+
+ /* Read SmartFanIV trip points */
+ for (i = 0; i < ARRAY_SIZE(data->sf4_reg); i++) {
+ for (tmp = 0; tmp < 7; tmp++) {
+ data->sf4_reg[i][SF4_TEMP][tmp] =
+ w83795_read(client,
+ W83795_REG_SF4_TEMP(i, tmp));
+ data->sf4_reg[i][SF4_PWM][tmp] =
+ w83795_read(client, W83795_REG_SF4_PWM(i, tmp));
+ }
+ }
+
+ /* Read setup PWM */
+ for (i = 0; i < ARRAY_SIZE(data->setup_pwm); i++)
+ data->setup_pwm[i] =
+ w83795_read(client, W83795_REG_SETUP_PWM(i));
+
+ data->valid_pwm_config = 1;
+
+END:
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+static struct w83795_data *w83795_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ u16 tmp;
+ u8 intrusion;
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!data->valid_limits)
+ w83795_update_limits(client);
+
+ if (!(time_after(jiffies, data->last_updated + HZ * 2)
+ || !data->valid))
+ goto END;
+
+ /* Update the voltages value */
+ for (i = 0; i < ARRAY_SIZE(data->in); i++) {
+ if (!(data->has_in & (1 << i)))
+ continue;
+ tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2;
+ tmp |= w83795_read(client, W83795_REG_VRLSB) >> 6;
+ data->in[i][IN_READ] = tmp;
+ }
+
+ /* in0-2 can have dynamic limits (W83795G only) */
+ if (data->has_dyn_in) {
+ u8 lsb_max = w83795_read(client, IN_LSB_REG(0, IN_MAX));
+ u8 lsb_low = w83795_read(client, IN_LSB_REG(0, IN_LOW));
+
+ for (i = 0; i < 3; i++) {
+ if (!(data->has_dyn_in & (1 << i)))
+ continue;
+ data->in[i][IN_MAX] =
+ w83795_read(client, W83795_REG_IN[i][IN_MAX]);
+ data->in[i][IN_LOW] =
+ w83795_read(client, W83795_REG_IN[i][IN_LOW]);
+ data->in_lsb[i][IN_MAX] = (lsb_max >> (2 * i)) & 0x03;
+ data->in_lsb[i][IN_LOW] = (lsb_low >> (2 * i)) & 0x03;
+ }
+ }
+
+ /* Update fan */
+ for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4;
+ data->fan[i] |= w83795_read(client, W83795_REG_VRLSB) >> 4;
+ }
+
+ /* Update temperature */
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ data->temp[i][TEMP_READ] =
+ w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]);
+ data->temp_read_vrlsb[i] =
+ w83795_read(client, W83795_REG_VRLSB);
+ }
+
+ /* Update dts temperature */
+ if (data->enable_dts) {
+ for (i = 0; i < ARRAY_SIZE(data->dts); i++) {
+ if (!(data->has_dts & (1 << i)))
+ continue;
+ data->dts[i] =
+ w83795_read(client, W83795_REG_DTS(i));
+ data->dts_read_vrlsb[i] =
+ w83795_read(client, W83795_REG_VRLSB);
+ }
+ }
+
+ /* Update pwm output */
+ for (i = 0; i < data->has_pwm; i++) {
+ data->pwm[i][PWM_OUTPUT] =
+ w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
+ }
+
+ /*
+ * Update intrusion and alarms
+ * It is important to read intrusion first, because reading from
+ * register SMI STS6 clears the interrupt status temporarily.
+ */
+ tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+ /* Switch to interrupt status for intrusion if needed */
+ if (tmp & ALARM_CTRL_RTSACS)
+ w83795_write(client, W83795_REG_ALARM_CTRL,
+ tmp & ~ALARM_CTRL_RTSACS);
+ intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+ /* Switch to real-time alarms */
+ w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
+ for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
+ data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+ data->alarms[5] |= intrusion;
+ /* Restore original configuration if needed */
+ if (!(tmp & ALARM_CTRL_RTSACS))
+ w83795_write(client, W83795_REG_ALARM_CTRL,
+ tmp & ~ALARM_CTRL_RTSACS);
+
+ data->last_updated = jiffies;
+ data->valid = true;
+
+END:
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+/*
+ * Sysfs attributes
+ */
+
+#define ALARM_STATUS 0
+#define BEEP_ENABLE 1
+static ssize_t
+show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index >> 3;
+ int bit = sensor_attr->index & 0x07;
+ u8 val;
+
+ if (nr == ALARM_STATUS)
+ val = (data->alarms[index] >> bit) & 1;
+ else /* BEEP_ENABLE */
+ val = (data->beeps[index] >> bit) & 1;
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index >> 3;
+ int shift = sensor_attr->index & 0x07;
+ u8 beep_bit = 1 << shift;
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beeps[index] = w83795_read(client, W83795_REG_BEEP(index));
+ data->beeps[index] &= ~beep_bit;
+ data->beeps[index] |= val << shift;
+ w83795_write(client, W83795_REG_BEEP(index), data->beeps[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* Write 0 to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0 || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ val = w83795_read(client, W83795_REG_CLR_CHASSIS);
+ val |= 0x80;
+ w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+ /* Clear status and force cache refresh */
+ w83795_read(client, W83795_REG_ALARM(5));
+ data->valid = false;
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define FAN_INPUT 0
+#define FAN_MIN 1
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ u16 val;
+
+ if (nr == FAN_INPUT)
+ val = data->fan[index] & 0x0fff;
+ else
+ val = data->fan_min[index] & 0x0fff;
+
+ return sprintf(buf, "%lu\n", fan_from_reg(val));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val))
+ return -EINVAL;
+ val = fan_to_reg(val);
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[index] = val;
+ w83795_write(client, W83795_REG_FAN_MIN_HL(index), (val >> 4) & 0xff);
+ val &= 0x0f;
+ if (index & 1) {
+ val <<= 4;
+ val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+ & 0x0f;
+ } else {
+ val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
+ & 0xf0;
+ }
+ w83795_write(client, W83795_REG_FAN_MIN_LSB(index), val & 0xff);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data;
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned int val;
+
+ data = nr == PWM_OUTPUT ? w83795_update_device(dev)
+ : w83795_update_pwm_config(dev);
+
+ switch (nr) {
+ case PWM_STOP_TIME:
+ val = time_from_reg(data->pwm[index][nr]);
+ break;
+ case PWM_FREQ:
+ val = pwm_freq_from_reg(data->pwm[index][nr], data->clkin);
+ break;
+ default:
+ val = data->pwm[index][nr];
+ break;
+ }
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ switch (nr) {
+ case PWM_STOP_TIME:
+ val = time_to_reg(val);
+ break;
+ case PWM_FREQ:
+ val = pwm_freq_to_reg(val, data->clkin);
+ break;
+ default:
+ val = clamp_val(val, 0, 0xff);
+ break;
+ }
+ w83795_write(client, W83795_REG_PWM(index, nr), val);
+ data->pwm[index][nr] = val;
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ int index = sensor_attr->index;
+ u8 tmp;
+
+ /* Speed cruise mode */
+ if (data->pwm_fcms[0] & (1 << index)) {
+ tmp = 2;
+ goto out;
+ }
+ /* Thermal cruise or SmartFan IV mode */
+ for (tmp = 0; tmp < 6; tmp++) {
+ if (data->pwm_tfmr[tmp] & (1 << index)) {
+ tmp = 3;
+ goto out;
+ }
+ }
+ /* Manual mode */
+ tmp = 1;
+
+out:
+ return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ unsigned long val;
+ int i;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val < 1 || val > 2)
+ return -EINVAL;
+
+#ifndef CONFIG_SENSORS_W83795_FANCTRL
+ if (val > 1) {
+ dev_warn(dev, "Automatic fan speed control support disabled\n");
+ dev_warn(dev, "Build with CONFIG_SENSORS_W83795_FANCTRL=y if you want it\n");
+ return -EOPNOTSUPP;
+ }
+#endif
+
+ mutex_lock(&data->update_lock);
+ switch (val) {
+ case 1:
+ /* Clear speed cruise mode bits */
+ data->pwm_fcms[0] &= ~(1 << index);
+ w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+ /* Clear thermal cruise mode bits */
+ for (i = 0; i < 6; i++) {
+ data->pwm_tfmr[i] &= ~(1 << index);
+ w83795_write(client, W83795_REG_TFMR(i),
+ data->pwm_tfmr[i]);
+ }
+ break;
+ case 2:
+ data->pwm_fcms[0] |= (1 << index);
+ w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+ break;
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ int index = to_sensor_dev_attr_2(attr)->index;
+ unsigned int mode;
+
+ if (data->pwm_fomc & (1 << index))
+ mode = 0; /* DC */
+ else
+ mode = 1; /* PWM */
+
+ return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+ int useful = 0, i;
+
+ for (i = 0; i < 4; i++) {
+ if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+ continue;
+ if (tss_map[i][tsrc] < 6) /* Analog */
+ useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+ else /* Digital */
+ useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+ }
+
+ return useful;
+}
+
+static ssize_t
+show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ int index = sensor_attr->index;
+ u8 tmp = data->temp_src[index / 2];
+
+ if (index & 1)
+ tmp >>= 4; /* Pick high nibble */
+ else
+ tmp &= 0x0f; /* Pick low nibble */
+
+ /* Look-up the actual temperature channel number */
+ if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+ return -EINVAL; /* Shouldn't happen */
+
+ return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
+}
+
+static ssize_t
+store_temp_src(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ int tmp;
+ unsigned long channel;
+ u8 val = index / 2;
+
+ if (kstrtoul(buf, 10, &channel) < 0 ||
+ channel < 1 || channel > 14)
+ return -EINVAL;
+
+ /* Check if request can be fulfilled */
+ for (tmp = 0; tmp < 4; tmp++) {
+ if (tss_map[tmp][index] == channel - 1)
+ break;
+ }
+ if (tmp == 4) /* No match */
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ if (index & 1) {
+ tmp <<= 4;
+ data->temp_src[val] &= 0x0f;
+ } else {
+ data->temp_src[val] &= 0xf0;
+ }
+ data->temp_src[val] |= tmp;
+ w83795_write(client, W83795_REG_TSS(val), data->temp_src[val]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+#define TEMP_PWM_ENABLE 0
+#define TEMP_PWM_FAN_MAP 1
+static ssize_t
+show_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 tmp = 0xff;
+
+ switch (nr) {
+ case TEMP_PWM_ENABLE:
+ tmp = (data->pwm_fcms[1] >> index) & 1;
+ if (tmp)
+ tmp = 4;
+ else
+ tmp = 3;
+ break;
+ case TEMP_PWM_FAN_MAP:
+ tmp = data->pwm_tfmr[index];
+ break;
+ }
+
+ return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long tmp;
+
+ if (kstrtoul(buf, 10, &tmp) < 0)
+ return -EINVAL;
+
+ switch (nr) {
+ case TEMP_PWM_ENABLE:
+ if (tmp != 3 && tmp != 4)
+ return -EINVAL;
+ tmp -= 3;
+ mutex_lock(&data->update_lock);
+ data->pwm_fcms[1] &= ~(1 << index);
+ data->pwm_fcms[1] |= tmp << index;
+ w83795_write(client, W83795_REG_FCMS2, data->pwm_fcms[1]);
+ mutex_unlock(&data->update_lock);
+ break;
+ case TEMP_PWM_FAN_MAP:
+ mutex_lock(&data->update_lock);
+ tmp = clamp_val(tmp, 0, 0xff);
+ w83795_write(client, W83795_REG_TFMR(index), tmp);
+ data->pwm_tfmr[index] = tmp;
+ mutex_unlock(&data->update_lock);
+ break;
+ }
+ return count;
+}
+
+#define FANIN_TARGET 0
+#define FANIN_TOL 1
+static ssize_t
+show_fanin(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u16 tmp = 0;
+
+ switch (nr) {
+ case FANIN_TARGET:
+ tmp = fan_from_reg(data->target_speed[index]);
+ break;
+ case FANIN_TOL:
+ tmp = data->tol_speed;
+ break;
+ }
+
+ return sprintf(buf, "%u\n", tmp);
+}
+
+static ssize_t
+store_fanin(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ switch (nr) {
+ case FANIN_TARGET:
+ val = fan_to_reg(clamp_val(val, 0, 0xfff));
+ w83795_write(client, W83795_REG_FTSH(index), val >> 4);
+ w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0);
+ data->target_speed[index] = val;
+ break;
+ case FANIN_TOL:
+ val = clamp_val(val, 0, 0x3f);
+ w83795_write(client, W83795_REG_TFTS, val);
+ data->tol_speed = val;
+ break;
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+
+static ssize_t
+show_temp_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ long tmp = temp_from_reg(data->pwm_temp[index][nr]);
+
+ return sprintf(buf, "%ld\n", tmp);
+}
+
+static ssize_t
+store_temp_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+ u8 tmp;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ val /= 1000;
+
+ mutex_lock(&data->update_lock);
+ switch (nr) {
+ case TEMP_PWM_TTTI:
+ val = clamp_val(val, 0, 0x7f);
+ w83795_write(client, W83795_REG_TTTI(index), val);
+ break;
+ case TEMP_PWM_CTFS:
+ val = clamp_val(val, 0, 0x7f);
+ w83795_write(client, W83795_REG_CTFS(index), val);
+ break;
+ case TEMP_PWM_HCT:
+ val = clamp_val(val, 0, 0x0f);
+ tmp = w83795_read(client, W83795_REG_HT(index));
+ tmp &= 0x0f;
+ tmp |= (val << 4) & 0xf0;
+ w83795_write(client, W83795_REG_HT(index), tmp);
+ break;
+ case TEMP_PWM_HOT:
+ val = clamp_val(val, 0, 0x0f);
+ tmp = w83795_read(client, W83795_REG_HT(index));
+ tmp &= 0xf0;
+ tmp |= val & 0x0f;
+ w83795_write(client, W83795_REG_HT(index), tmp);
+ break;
+ }
+ data->pwm_temp[index][nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_sf4_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+
+ return sprintf(buf, "%u\n", data->sf4_reg[index][SF4_PWM][nr]);
+}
+
+static ssize_t
+store_sf4_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ w83795_write(client, W83795_REG_SF4_PWM(index, nr), val);
+ data->sf4_reg[index][SF4_PWM][nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_sf4_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+
+ return sprintf(buf, "%u\n",
+ (data->sf4_reg[index][SF4_TEMP][nr]) * 1000);
+}
+
+static ssize_t
+store_sf4_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ val /= 1000;
+
+ mutex_lock(&data->update_lock);
+ w83795_write(client, W83795_REG_SF4_TEMP(index, nr), val);
+ data->sf4_reg[index][SF4_TEMP][nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ long temp = temp_from_reg(data->temp[index][nr]);
+
+ if (nr == TEMP_READ)
+ temp += (data->temp_read_vrlsb[index] >> 6) * 250;
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ long tmp;
+
+ if (kstrtol(buf, 10, &tmp) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->temp[index][nr] = temp_to_reg(tmp, -128, 127);
+ w83795_write(client, W83795_REG_TEMP[index][nr], data->temp[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+static ssize_t
+show_dts_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = dev_get_drvdata(dev);
+ int tmp;
+
+ if (data->enable_dts & 2)
+ tmp = 5;
+ else
+ tmp = 6;
+
+ return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+show_dts(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ long temp = temp_from_reg(data->dts[index]);
+
+ temp += (data->dts_read_vrlsb[index] >> 6) * 250;
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+show_dts_ext(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct w83795_data *data = dev_get_drvdata(dev);
+ long temp = temp_from_reg(data->dts_ext[nr]);
+
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_dts_ext(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ long tmp;
+
+ if (kstrtol(buf, 10, &tmp) < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->dts_ext[nr] = temp_to_reg(tmp, -128, 127);
+ w83795_write(client, W83795_REG_DTS_EXT(nr), data->dts_ext[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+static ssize_t
+show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83795_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ int tmp;
+
+ if (data->temp_mode & (1 << index))
+ tmp = 3; /* Thermal diode */
+ else
+ tmp = 4; /* Thermistor */
+
+ return sprintf(buf, "%d\n", tmp);
+}
+
+/* Only for temp1-4 (temp5-6 can only be thermistor) */
+static ssize_t
+store_temp_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ int reg_shift;
+ unsigned long val;
+ u8 tmp;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if ((val != 4) && (val != 3))
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ if (val == 3) {
+ /* Thermal diode */
+ val = 0x01;
+ data->temp_mode |= 1 << index;
+ } else if (val == 4) {
+ /* Thermistor */
+ val = 0x03;
+ data->temp_mode &= ~(1 << index);
+ }
+
+ reg_shift = 2 * index;
+ tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+ tmp &= ~(0x03 << reg_shift);
+ tmp |= val << reg_shift;
+ w83795_write(client, W83795_REG_TEMP_CTRL2, tmp);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+/* show/store VIN */
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83795_data *data = w83795_update_device(dev);
+ u16 val = data->in[index][nr];
+ u8 lsb_idx;
+
+ switch (nr) {
+ case IN_READ:
+ /* calculate this value again by sensors as sensors3.conf */
+ if ((index >= 17) &&
+ !((data->has_gain >> (index - 17)) & 1))
+ val *= 8;
+ break;
+ case IN_MAX:
+ case IN_LOW:
+ lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+ val <<= 2;
+ val |= (data->in_lsb[lsb_idx][nr] >>
+ IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]) & 0x03;
+ if ((index >= 17) &&
+ !((data->has_gain >> (index - 17)) & 1))
+ val *= 8;
+ break;
+ }
+ val = in_from_reg(index, val);
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+ u8 tmp;
+ u8 lsb_idx;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ val = in_to_reg(index, val);
+
+ if ((index >= 17) &&
+ !((data->has_gain >> (index - 17)) & 1))
+ val /= 8;
+ val = clamp_val(val, 0, 0x3FF);
+ mutex_lock(&data->update_lock);
+
+ lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
+ tmp = w83795_read(client, IN_LSB_REG(lsb_idx, nr));
+ tmp &= ~(0x03 << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]);
+ tmp |= (val & 0x03) << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT];
+ w83795_write(client, IN_LSB_REG(lsb_idx, nr), tmp);
+ data->in_lsb[lsb_idx][nr] = tmp;
+
+ tmp = (val >> 2) & 0xff;
+ w83795_write(client, W83795_REG_IN[index][nr], tmp);
+ data->in[index][nr] = tmp;
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+static ssize_t
+show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct w83795_data *data = w83795_update_pwm_config(dev);
+ u16 val = data->setup_pwm[nr];
+
+ switch (nr) {
+ case SETUP_PWM_UPTIME:
+ case SETUP_PWM_DOWNTIME:
+ val = time_from_reg(val);
+ break;
+ }
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_setup(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83795_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ switch (nr) {
+ case SETUP_PWM_DEFAULT:
+ val = clamp_val(val, 0, 0xff);
+ break;
+ case SETUP_PWM_UPTIME:
+ case SETUP_PWM_DOWNTIME:
+ val = time_to_reg(val);
+ if (val == 0)
+ return -EINVAL;
+ break;
+ }
+
+ mutex_lock(&data->update_lock);
+ data->setup_pwm[nr] = val;
+ w83795_write(client, W83795_REG_SETUP_PWM(nr), val);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+#endif
+
+
+#define NOT_USED -1
+
+/*
+ * Don't change the attribute order, _max, _min and _beep are accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_IN(index) { \
+ SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
+ IN_READ, index), \
+ SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_MAX, index), \
+ SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_LOW, index), \
+ SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + ((index > 14) ? 1 : 0)), \
+ SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, \
+ index + ((index > 14) ? 1 : 0)) }
+
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_FAN(index) { \
+ SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
+ NULL, FAN_INPUT, index - 1), \
+ SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \
+ show_fan, store_fan_min, FAN_MIN, index - 1), \
+ SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + 31), \
+ SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 31) }
+
+#define SENSOR_ATTR_PWM(index) { \
+ SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \
+ store_pwm, PWM_OUTPUT, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \
+ show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO, \
+ show_pwm_mode, NULL, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_freq, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_FREQ, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_NONSTOP, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_START, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_STOP_TIME, index - 1), \
+ SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
+ show_fanin, store_fanin, FANIN_TARGET, index - 1) }
+
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_DTS(index) { \
+ SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \
+ show_dts_mode, NULL, NOT_USED, index - 7), \
+ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_dts, \
+ NULL, NOT_USED, index - 7), \
+ SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_dts_ext, \
+ store_dts_ext, DTS_CRIT, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR, \
+ show_dts_ext, store_dts_ext, DTS_CRIT_HYST, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_dts_ext, \
+ store_dts_ext, DTS_WARN, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_dts_ext, store_dts_ext, DTS_WARN_HYST, NOT_USED), \
+ SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
+ show_alarm_beep, NULL, ALARM_STATUS, index + 17), \
+ SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
+
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
+#define SENSOR_ATTR_TEMP(index) { \
+ SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \
+ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \
+ NULL, TEMP_READ, index - 1), \
+ SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_CRIT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_WARN, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_WARN_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
+ show_alarm_beep, NULL, ALARM_STATUS, \
+ index + (index > 4 ? 11 : 17)), \
+ SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, \
+ index + (index > 4 ? 11 : 17)), \
+ SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
+ show_temp_pwm_enable, store_temp_pwm_enable, \
+ TEMP_PWM_ENABLE, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_channels_pwm, S_IWUSR | S_IRUGO, \
+ show_temp_pwm_enable, store_temp_pwm_enable, \
+ TEMP_PWM_FAN_MAP, index - 1), \
+ SENSOR_ATTR_2(thermal_cruise##index, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_TTTI, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_CTFS, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn_hyst, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_HCT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_operation_hyst, S_IWUSR | S_IRUGO, \
+ show_temp_pwm, store_temp_pwm, TEMP_PWM_HOT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
+ show_sf4_pwm, store_sf4_pwm, 6, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
+ show_sf4_temp, store_sf4_temp, 6, index - 1) }
+
+
+static struct sensor_device_attribute_2 w83795_in[][5] = {
+ SENSOR_ATTR_IN(0),
+ SENSOR_ATTR_IN(1),
+ SENSOR_ATTR_IN(2),
+ SENSOR_ATTR_IN(3),
+ SENSOR_ATTR_IN(4),
+ SENSOR_ATTR_IN(5),
+ SENSOR_ATTR_IN(6),
+ SENSOR_ATTR_IN(7),
+ SENSOR_ATTR_IN(8),
+ SENSOR_ATTR_IN(9),
+ SENSOR_ATTR_IN(10),
+ SENSOR_ATTR_IN(11),
+ SENSOR_ATTR_IN(12),
+ SENSOR_ATTR_IN(13),
+ SENSOR_ATTR_IN(14),
+ SENSOR_ATTR_IN(15),
+ SENSOR_ATTR_IN(16),
+ SENSOR_ATTR_IN(17),
+ SENSOR_ATTR_IN(18),
+ SENSOR_ATTR_IN(19),
+ SENSOR_ATTR_IN(20),
+};
+
+static const struct sensor_device_attribute_2 w83795_fan[][4] = {
+ SENSOR_ATTR_FAN(1),
+ SENSOR_ATTR_FAN(2),
+ SENSOR_ATTR_FAN(3),
+ SENSOR_ATTR_FAN(4),
+ SENSOR_ATTR_FAN(5),
+ SENSOR_ATTR_FAN(6),
+ SENSOR_ATTR_FAN(7),
+ SENSOR_ATTR_FAN(8),
+ SENSOR_ATTR_FAN(9),
+ SENSOR_ATTR_FAN(10),
+ SENSOR_ATTR_FAN(11),
+ SENSOR_ATTR_FAN(12),
+ SENSOR_ATTR_FAN(13),
+ SENSOR_ATTR_FAN(14),
+};
+
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
+ SENSOR_ATTR_TEMP(1),
+ SENSOR_ATTR_TEMP(2),
+ SENSOR_ATTR_TEMP(3),
+ SENSOR_ATTR_TEMP(4),
+ SENSOR_ATTR_TEMP(5),
+ SENSOR_ATTR_TEMP(6),
+};
+
+static const struct sensor_device_attribute_2 w83795_dts[][8] = {
+ SENSOR_ATTR_DTS(7),
+ SENSOR_ATTR_DTS(8),
+ SENSOR_ATTR_DTS(9),
+ SENSOR_ATTR_DTS(10),
+ SENSOR_ATTR_DTS(11),
+ SENSOR_ATTR_DTS(12),
+ SENSOR_ATTR_DTS(13),
+ SENSOR_ATTR_DTS(14),
+};
+
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
+ SENSOR_ATTR_PWM(1),
+ SENSOR_ATTR_PWM(2),
+ SENSOR_ATTR_PWM(3),
+ SENSOR_ATTR_PWM(4),
+ SENSOR_ATTR_PWM(5),
+ SENSOR_ATTR_PWM(6),
+ SENSOR_ATTR_PWM(7),
+ SENSOR_ATTR_PWM(8),
+};
+
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+ SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 0),
+ SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 1),
+ SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 2),
+ SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 3),
+ SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 4),
+ SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+ show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
+static const struct sensor_device_attribute_2 sda_single_files[] = {
+ SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_chassis_clear, ALARM_STATUS, 46),
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+ SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
+ store_fanin, FANIN_TOL, NOT_USED),
+ SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
+ SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
+ SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
+#endif
+};
+
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+ SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 46),
+ SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_beep, BEEP_ENABLE, 47),
+};
+
+/*
+ * Driver interface
+ */
+
+static void w83795_init_client(struct i2c_client *client)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+ static const u16 clkin[4] = { /* in kHz */
+ 14318, 24000, 33333, 48000
+ };
+ u8 config;
+
+ if (reset)
+ w83795_write(client, W83795_REG_CONFIG, 0x80);
+
+ /* Start monitoring if needed */
+ config = w83795_read(client, W83795_REG_CONFIG);
+ if (!(config & W83795_REG_CONFIG_START)) {
+ dev_info(&client->dev, "Enabling monitoring operations\n");
+ w83795_write(client, W83795_REG_CONFIG,
+ config | W83795_REG_CONFIG_START);
+ }
+
+ data->clkin = clkin[(config >> 3) & 0x3];
+ dev_dbg(&client->dev, "clkin = %u kHz\n", data->clkin);
+}
+
+static int w83795_get_device_id(struct i2c_client *client)
+{
+ int device_id;
+
+ device_id = i2c_smbus_read_byte_data(client, W83795_REG_DEVICEID);
+
+ /*
+ * Special case for rev. A chips; can't be checked first because later
+ * revisions emulate this for compatibility
+ */
+ if (device_id < 0 || (device_id & 0xf0) != 0x50) {
+ int alt_id;
+
+ alt_id = i2c_smbus_read_byte_data(client,
+ W83795_REG_DEVICEID_A);
+ if (alt_id == 0x50)
+ device_id = alt_id;
+ }
+
+ return device_id;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int w83795_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ int bank, vendor_id, device_id, expected, i2c_addr, config;
+ struct i2c_adapter *adapter = client->adapter;
+ unsigned short address = client->addr;
+ const char *chip_name;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+ bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+ if (bank < 0 || (bank & 0x7c)) {
+ dev_dbg(&adapter->dev,
+ "w83795: Detection failed at addr 0x%02hx, check %s\n",
+ address, "bank");
+ return -ENODEV;
+ }
+
+ /* Check Nuvoton vendor ID */
+ vendor_id = i2c_smbus_read_byte_data(client, W83795_REG_VENDORID);
+ expected = bank & 0x80 ? 0x5c : 0xa3;
+ if (vendor_id != expected) {
+ dev_dbg(&adapter->dev,
+ "w83795: Detection failed at addr 0x%02hx, check %s\n",
+ address, "vendor id");
+ return -ENODEV;
+ }
+
+ /* Check device ID */
+ device_id = w83795_get_device_id(client) |
+ (i2c_smbus_read_byte_data(client, W83795_REG_CHIPID) << 8);
+ if ((device_id >> 4) != 0x795) {
+ dev_dbg(&adapter->dev,
+ "w83795: Detection failed at addr 0x%02hx, check %s\n",
+ address, "device id\n");
+ return -ENODEV;
+ }
+
+ /*
+ * If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR
+ * should match
+ */
+ if ((bank & 0x07) == 0) {
+ i2c_addr = i2c_smbus_read_byte_data(client,
+ W83795_REG_I2C_ADDR);
+ if ((i2c_addr & 0x7f) != address) {
+ dev_dbg(&adapter->dev,
+ "w83795: Detection failed at addr 0x%02hx, "
+ "check %s\n", address, "i2c addr");
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * Check 795 chip type: 795G or 795ADG
+ * Usually we don't write to chips during detection, but here we don't
+ * quite have the choice; hopefully it's OK, we are about to return
+ * success anyway
+ */
+ if ((bank & 0x07) != 0)
+ i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL,
+ bank & ~0x07);
+ config = i2c_smbus_read_byte_data(client, W83795_REG_CONFIG);
+ if (config & W83795_REG_CONFIG_CONFIG48)
+ chip_name = "w83795adg";
+ else
+ chip_name = "w83795g";
+
+ strscpy(info->type, chip_name, I2C_NAME_SIZE);
+ dev_info(&adapter->dev, "Found %s rev. %c at 0x%02hx\n", chip_name,
+ 'A' + (device_id & 0xf), address);
+
+ return 0;
+}
+
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+#define NUM_PWM_ATTRIBUTES ARRAY_SIZE(w83795_pwm[0])
+#define NUM_TEMP_ATTRIBUTES ARRAY_SIZE(w83795_temp[0])
+#else
+#define NUM_PWM_ATTRIBUTES 4
+#define NUM_TEMP_ATTRIBUTES 8
+#endif
+
+static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
+ const struct device_attribute *))
+{
+ struct w83795_data *data = dev_get_drvdata(dev);
+ int err, i, j;
+
+ for (i = 0; i < ARRAY_SIZE(w83795_in); i++) {
+ if (!(data->has_in & (1 << i)))
+ continue;
+ for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+ if (j == 4 && !data->enable_beep)
+ continue;
+ err = fn(dev, &w83795_in[i][j].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+ if (j == 3 && !data->enable_beep)
+ continue;
+ err = fn(dev, &w83795_fan[i][j].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+ j = w83795_tss_useful(data, i);
+ if (!j)
+ continue;
+ err = fn(dev, &w83795_tss[i].dev_attr);
+ if (err)
+ return err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
+ err = fn(dev, &sda_single_files[i].dev_attr);
+ if (err)
+ return err;
+ }
+
+ if (data->enable_beep) {
+ for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+ err = fn(dev, &sda_beep_files[i].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
+ for (i = 0; i < data->has_pwm; i++) {
+ for (j = 0; j < NUM_PWM_ATTRIBUTES; j++) {
+ err = fn(dev, &w83795_pwm[i][j].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) {
+ if (!(data->has_temp & (1 << i)))
+ continue;
+ for (j = 0; j < NUM_TEMP_ATTRIBUTES; j++) {
+ if (j == 7 && !data->enable_beep)
+ continue;
+ err = fn(dev, &w83795_temp[i][j].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+
+ if (data->enable_dts) {
+ for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) {
+ if (!(data->has_dts & (1 << i)))
+ continue;
+ for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+ if (j == 7 && !data->enable_beep)
+ continue;
+ err = fn(dev, &w83795_dts[i][j].dev_attr);
+ if (err)
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* We need a wrapper that fits in w83795_handle_files */
+static int device_remove_file_wrapper(struct device *dev,
+ const struct device_attribute *attr)
+{
+ device_remove_file(dev, attr);
+ return 0;
+}
+
+static void w83795_check_dynamic_in_limits(struct i2c_client *client)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+ u8 vid_ctl;
+ int i, err_max, err_min;
+
+ vid_ctl = w83795_read(client, W83795_REG_VID_CTRL);
+
+ /* Return immediately if VRM isn't configured */
+ if ((vid_ctl & 0x07) == 0x00 || (vid_ctl & 0x07) == 0x07)
+ return;
+
+ data->has_dyn_in = (vid_ctl >> 3) & 0x07;
+ for (i = 0; i < 2; i++) {
+ if (!(data->has_dyn_in & (1 << i)))
+ continue;
+
+ /* Voltage limits in dynamic mode, switch to read-only */
+ err_max = sysfs_chmod_file(&client->dev.kobj,
+ &w83795_in[i][2].dev_attr.attr,
+ S_IRUGO);
+ err_min = sysfs_chmod_file(&client->dev.kobj,
+ &w83795_in[i][3].dev_attr.attr,
+ S_IRUGO);
+ if (err_max || err_min)
+ dev_warn(&client->dev,
+ "Failed to set in%d limits read-only (%d, %d)\n",
+ i, err_max, err_min);
+ else
+ dev_info(&client->dev,
+ "in%d limits set dynamically from VID\n", i);
+ }
+}
+
+/* Check pins that can be used for either temperature or voltage monitoring */
+static void w83795_apply_temp_config(struct w83795_data *data, u8 config,
+ int temp_chan, int in_chan)
+{
+ /* config is a 2-bit value */
+ switch (config) {
+ case 0x2: /* Voltage monitoring */
+ data->has_in |= 1 << in_chan;
+ break;
+ case 0x1: /* Thermal diode */
+ if (temp_chan >= 4)
+ break;
+ data->temp_mode |= 1 << temp_chan;
+ fallthrough;
+ case 0x3: /* Thermistor */
+ data->has_temp |= 1 << temp_chan;
+ break;
+ }
+}
+
+static const struct i2c_device_id w83795_id[];
+
+static int w83795_probe(struct i2c_client *client)
+{
+ int i;
+ u8 tmp;
+ struct device *dev = &client->dev;
+ struct w83795_data *data;
+ int err;
+
+ data = devm_kzalloc(dev, sizeof(struct w83795_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ data->chip_type = i2c_match_id(w83795_id, client)->driver_data;
+ data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
+ mutex_init(&data->update_lock);
+
+ /* Initialize the chip */
+ w83795_init_client(client);
+
+ /* Check which voltages and fans are present */
+ data->has_in = w83795_read(client, W83795_REG_VOLT_CTRL1)
+ | (w83795_read(client, W83795_REG_VOLT_CTRL2) << 8);
+ data->has_fan = w83795_read(client, W83795_REG_FANIN_CTRL1)
+ | (w83795_read(client, W83795_REG_FANIN_CTRL2) << 8);
+
+ /* Check which analog temperatures and extra voltages are present */
+ tmp = w83795_read(client, W83795_REG_TEMP_CTRL1);
+ if (tmp & 0x20)
+ data->enable_dts = 1;
+ w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 5, 16);
+ w83795_apply_temp_config(data, tmp & 0x3, 4, 15);
+ tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
+ w83795_apply_temp_config(data, tmp >> 6, 3, 20);
+ w83795_apply_temp_config(data, (tmp >> 4) & 0x3, 2, 19);
+ w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 1, 18);
+ w83795_apply_temp_config(data, tmp & 0x3, 0, 17);
+
+ /* Check DTS enable status */
+ if (data->enable_dts) {
+ if (1 & w83795_read(client, W83795_REG_DTSC))
+ data->enable_dts |= 2;
+ data->has_dts = w83795_read(client, W83795_REG_DTSE);
+ }
+
+ /* Report PECI Tbase values */
+ if (data->enable_dts == 1) {
+ for (i = 0; i < 8; i++) {
+ if (!(data->has_dts & (1 << i)))
+ continue;
+ tmp = w83795_read(client, W83795_REG_PECI_TBASE(i));
+ dev_info(&client->dev,
+ "PECI agent %d Tbase temperature: %u\n",
+ i + 1, (unsigned int)tmp & 0x7f);
+ }
+ }
+
+ data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f;
+
+ /* pwm and smart fan */
+ if (data->chip_type == w83795g)
+ data->has_pwm = 8;
+ else
+ data->has_pwm = 2;
+
+ /* Check if BEEP pin is available */
+ if (data->chip_type == w83795g) {
+ /* The W83795G has a dedicated BEEP pin */
+ data->enable_beep = 1;
+ } else {
+ /*
+ * The W83795ADG has a shared pin for OVT# and BEEP, so you
+ * can't have both
+ */
+ tmp = w83795_read(client, W83795_REG_OVT_CFG);
+ if ((tmp & OVT_CFG_SEL) == 0)
+ data->enable_beep = 1;
+ }
+
+ err = w83795_handle_files(dev, device_create_file);
+ if (err)
+ goto exit_remove;
+
+ if (data->chip_type == w83795g)
+ w83795_check_dynamic_in_limits(client);
+
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+exit_remove:
+ w83795_handle_files(dev, device_remove_file_wrapper);
+ return err;
+}
+
+static void w83795_remove(struct i2c_client *client)
+{
+ struct w83795_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ w83795_handle_files(&client->dev, device_remove_file_wrapper);
+}
+
+
+static const struct i2c_device_id w83795_id[] = {
+ { "w83795g", w83795g },
+ { "w83795adg", w83795adg },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, w83795_id);
+
+static struct i2c_driver w83795_driver = {
+ .driver = {
+ .name = "w83795",
+ },
+ .probe_new = w83795_probe,
+ .remove = w83795_remove,
+ .id_table = w83795_id,
+
+ .class = I2C_CLASS_HWMON,
+ .detect = w83795_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(w83795_driver);
+
+MODULE_AUTHOR("Wei Song, Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("W83795G/ADG hardware monitoring driver");
+MODULE_LICENSE("GPL");