summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-i801.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-i801.c')
-rw-r--r--drivers/i2c/busses/i2c-i801.c1864
1 files changed, 1864 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
new file mode 100644
index 000000000..3159ffbb7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -0,0 +1,1864 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
+ <mdsxyz123@yahoo.com>
+ Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de>
+ Copyright (C) 2010 Intel Corporation,
+ David Woodhouse <dwmw2@infradead.org>
+
+*/
+
+/*
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ * I/O Block I2C
+ * region SMBus Block proc. block
+ * Chip name PCI ID size PEC buffer call read
+ * ---------------------------------------------------------------------------
+ * 82801AA (ICH) 0x2413 16 no no no no
+ * 82801AB (ICH0) 0x2423 16 no no no no
+ * 82801BA (ICH2) 0x2443 16 no no no no
+ * 82801CA (ICH3) 0x2483 32 soft no no no
+ * 82801DB (ICH4) 0x24c3 32 hard yes no no
+ * 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ * 6300ESB 0x25a4 32 hard yes yes yes
+ * 82801F (ICH6) 0x266a 32 hard yes yes yes
+ * 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ * 82801G (ICH7) 0x27da 32 hard yes yes yes
+ * 82801H (ICH8) 0x283e 32 hard yes yes yes
+ * 82801I (ICH9) 0x2930 32 hard yes yes yes
+ * EP80579 (Tolapai) 0x5032 32 hard yes yes yes
+ * ICH10 0x3a30 32 hard yes yes yes
+ * ICH10 0x3a60 32 hard yes yes yes
+ * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
+ * 6 Series (PCH) 0x1c22 32 hard yes yes yes
+ * Patsburg (PCH) 0x1d22 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ * DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ * Panther Point (PCH) 0x1e22 32 hard yes yes yes
+ * Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
+ * Avoton (SOC) 0x1f3c 32 hard yes yes yes
+ * Wellsburg (PCH) 0x8d22 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
+ * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes
+ * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ * BayTrail (SOC) 0x0f12 32 hard yes yes yes
+ * Braswell (SOC) 0x2292 32 hard yes yes yes
+ * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
+ * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
+ * DNV (SOC) 0x19df 32 hard yes yes yes
+ * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes
+ * Broxton (SOC) 0x5ad4 32 hard yes yes yes
+ * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
+ * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
+ * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes
+ * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes
+ * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes
+ * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes
+ * Cedar Fork (PCH) 0x18df 32 hard yes yes yes
+ * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes
+ * Ice Lake-N (PCH) 0x38a3 32 hard yes yes yes
+ * Comet Lake (PCH) 0x02a3 32 hard yes yes yes
+ * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes
+ * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes
+ * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes
+ * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes
+ * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes
+ * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes
+ * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes
+ * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes
+ * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes
+ * Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes
+ * Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes
+ *
+ * Features supported by this driver:
+ * Software PEC no
+ * Hardware PEC yes
+ * Block buffer yes
+ * Block process call transaction yes
+ * I2C block read transaction yes (doesn't use the block buffer)
+ * Slave mode no
+ * SMBus Host Notify yes
+ * Interrupt processing yes
+ *
+ * See the file Documentation/i2c/busses/i2c-i801.rst for details.
+ */
+
+#define DRV_NAME "i801_smbus"
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/itco_wdt.h>
+#include <linux/platform_data/x86/p2sb.h>
+#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+#include <linux/gpio/machine.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
+#endif
+
+/* I801 SMBus address offsets */
+#define SMBHSTSTS(p) (0 + (p)->smba)
+#define SMBHSTCNT(p) (2 + (p)->smba)
+#define SMBHSTCMD(p) (3 + (p)->smba)
+#define SMBHSTADD(p) (4 + (p)->smba)
+#define SMBHSTDAT0(p) (5 + (p)->smba)
+#define SMBHSTDAT1(p) (6 + (p)->smba)
+#define SMBBLKDAT(p) (7 + (p)->smba)
+#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
+#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
+#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
+#define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */
+#define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */
+#define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */
+
+/* PCI Address Constants */
+#define SMBBAR 4
+#define SMBHSTCFG 0x040
+#define TCOBASE 0x050
+#define TCOCTL 0x054
+
+#define SBREG_SMBCTRL 0xc6000c
+#define SBREG_SMBCTRL_DNV 0xcf000c
+
+/* Host configuration bits for SMBHSTCFG */
+#define SMBHSTCFG_HST_EN BIT(0)
+#define SMBHSTCFG_SMB_SMI_EN BIT(1)
+#define SMBHSTCFG_I2C_EN BIT(2)
+#define SMBHSTCFG_SPD_WD BIT(4)
+
+/* TCO configuration bits for TCOCTL */
+#define TCOCTL_EN BIT(8)
+
+/* Auxiliary status register bits, ICH4+ only */
+#define SMBAUXSTS_CRCE BIT(0)
+#define SMBAUXSTS_STCO BIT(1)
+
+/* Auxiliary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC BIT(0)
+#define SMBAUXCTL_E32B BIT(1)
+
+/* I801 command constants */
+#define I801_QUICK 0x00
+#define I801_BYTE 0x04
+#define I801_BYTE_DATA 0x08
+#define I801_WORD_DATA 0x0C
+#define I801_PROC_CALL 0x10
+#define I801_BLOCK_DATA 0x14
+#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
+#define I801_BLOCK_PROC_CALL 0x1C
+
+/* I801 Host Control register bits */
+#define SMBHSTCNT_INTREN BIT(0)
+#define SMBHSTCNT_KILL BIT(1)
+#define SMBHSTCNT_LAST_BYTE BIT(5)
+#define SMBHSTCNT_START BIT(6)
+#define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */
+
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE BIT(7)
+#define SMBHSTSTS_INUSE_STS BIT(6)
+#define SMBHSTSTS_SMBALERT_STS BIT(5)
+#define SMBHSTSTS_FAILED BIT(4)
+#define SMBHSTSTS_BUS_ERR BIT(3)
+#define SMBHSTSTS_DEV_ERR BIT(2)
+#define SMBHSTSTS_INTR BIT(1)
+#define SMBHSTSTS_HOST_BUSY BIT(0)
+
+/* Host Notify Status register bits */
+#define SMBSLVSTS_HST_NTFY_STS BIT(0)
+
+/* Host Notify Command register bits */
+#define SMBSLVCMD_SMBALERT_DISABLE BIT(2)
+#define SMBSLVCMD_HST_NTFY_INTREN BIT(0)
+
+#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
+ SMBHSTSTS_DEV_ERR)
+
+#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
+ STATUS_ERROR_FLAGS)
+
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
+#define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df
+#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
+#define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
+#define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4
+#define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3
+#define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS 0x38a3
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3
+#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23
+#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3
+#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
+#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3
+#define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS 0x7e22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS 0xa0a3
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
+#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3
+
+struct i801_mux_config {
+ char *gpio_chip;
+ unsigned values[3];
+ int n_values;
+ unsigned classes[3];
+ unsigned gpios[2]; /* Relative to gpio_chip->base */
+ int n_gpios;
+};
+
+struct i801_priv {
+ struct i2c_adapter adapter;
+ unsigned long smba;
+ unsigned char original_hstcfg;
+ unsigned char original_hstcnt;
+ unsigned char original_slvcmd;
+ struct pci_dev *pci_dev;
+ unsigned int features;
+
+ /* isr processing */
+ struct completion done;
+ u8 status;
+
+ /* Command state used by isr for byte-by-byte block transactions */
+ u8 cmd;
+ bool is_read;
+ int count;
+ int len;
+ u8 *data;
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+ const struct i801_mux_config *mux_drvdata;
+ struct platform_device *mux_pdev;
+ struct gpiod_lookup_table *lookup;
+#endif
+ struct platform_device *tco_pdev;
+
+ /*
+ * If set to true the host controller registers are reserved for
+ * ACPI AML use. Protected by acpi_lock.
+ */
+ bool acpi_reserved;
+ struct mutex acpi_lock;
+};
+
+#define FEATURE_SMBUS_PEC BIT(0)
+#define FEATURE_BLOCK_BUFFER BIT(1)
+#define FEATURE_BLOCK_PROC BIT(2)
+#define FEATURE_I2C_BLOCK_READ BIT(3)
+#define FEATURE_IRQ BIT(4)
+#define FEATURE_HOST_NOTIFY BIT(5)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF BIT(15)
+#define FEATURE_TCO_SPT BIT(16)
+#define FEATURE_TCO_CNL BIT(17)
+
+static const char *i801_feature_names[] = {
+ "SMBus PEC",
+ "Block buffer",
+ "Block process call",
+ "I2C block read",
+ "Interrupt",
+ "SMBus Host Notify",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
+ "\t\t 0x01 disable SMBus PEC\n"
+ "\t\t 0x02 disable the block buffer\n"
+ "\t\t 0x08 disable the I2C block read functionality\n"
+ "\t\t 0x10 don't use interrupts\n"
+ "\t\t 0x20 disable SMBus Host Notify ");
+
+/* Make sure the SMBus host is ready to start transmitting.
+ Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(struct i801_priv *priv)
+{
+ int status;
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & SMBHSTSTS_HOST_BUSY) {
+ pci_err(priv->pci_dev, "SMBus is busy, can't use it!\n");
+ return -EBUSY;
+ }
+
+ status &= STATUS_FLAGS;
+ if (status) {
+ pci_dbg(priv->pci_dev, "Clearing status flags (%02x)\n", status);
+ outb_p(status, SMBHSTSTS(priv));
+ }
+
+ /*
+ * Clear CRC status if needed.
+ * During normal operation, i801_check_post() takes care
+ * of it after every operation. We do it here only in case
+ * the hardware was already in this state when the driver
+ * started.
+ */
+ if (priv->features & FEATURE_SMBUS_PEC) {
+ status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
+ if (status) {
+ pci_dbg(priv->pci_dev, "Clearing aux status flags (%02x)\n", status);
+ outb_p(status, SMBAUXSTS(priv));
+ }
+ }
+
+ return 0;
+}
+
+static int i801_check_post(struct i801_priv *priv, int status)
+{
+ int result = 0;
+
+ /*
+ * If the SMBus is still busy, we give up
+ */
+ if (unlikely(status < 0)) {
+ dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
+ /* try to stop the current command */
+ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+ outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
+ usleep_range(1000, 2000);
+ outb_p(0, SMBHSTCNT(priv));
+
+ /* Check if it worked */
+ status = inb_p(SMBHSTSTS(priv));
+ if ((status & SMBHSTSTS_HOST_BUSY) ||
+ !(status & SMBHSTSTS_FAILED))
+ dev_err(&priv->pci_dev->dev,
+ "Failed terminating the transaction\n");
+ return -ETIMEDOUT;
+ }
+
+ if (status & SMBHSTSTS_FAILED) {
+ result = -EIO;
+ dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+ }
+ if (status & SMBHSTSTS_DEV_ERR) {
+ /*
+ * This may be a PEC error, check and clear it.
+ *
+ * AUXSTS is handled differently from HSTSTS.
+ * For HSTSTS, i801_isr() or i801_wait_intr()
+ * has already cleared the error bits in hardware,
+ * and we are passed a copy of the original value
+ * in "status".
+ * For AUXSTS, the hardware register is left
+ * for us to handle here.
+ * This is asymmetric, slightly iffy, but safe,
+ * since all this code is serialized and the CRCE
+ * bit is harmless as long as it's cleared before
+ * the next operation.
+ */
+ if ((priv->features & FEATURE_SMBUS_PEC) &&
+ (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) {
+ outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv));
+ result = -EBADMSG;
+ dev_dbg(&priv->pci_dev->dev, "PEC error\n");
+ } else {
+ result = -ENXIO;
+ dev_dbg(&priv->pci_dev->dev, "No response\n");
+ }
+ }
+ if (status & SMBHSTSTS_BUS_ERR) {
+ result = -EAGAIN;
+ dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+ }
+
+ return result;
+}
+
+/* Wait for BUSY being cleared and either INTR or an error flag being set */
+static int i801_wait_intr(struct i801_priv *priv)
+{
+ unsigned long timeout = jiffies + priv->adapter.timeout;
+ int status, busy;
+
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ busy = status & SMBHSTSTS_HOST_BUSY;
+ status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
+ if (!busy && status)
+ return status;
+ } while (time_is_after_eq_jiffies(timeout));
+
+ return -ETIMEDOUT;
+}
+
+/* Wait for either BYTE_DONE or an error flag being set */
+static int i801_wait_byte_done(struct i801_priv *priv)
+{
+ unsigned long timeout = jiffies + priv->adapter.timeout;
+ int status;
+
+ do {
+ usleep_range(250, 500);
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE))
+ return status & STATUS_ERROR_FLAGS;
+ } while (time_is_after_eq_jiffies(timeout));
+
+ return -ETIMEDOUT;
+}
+
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+ int status;
+ unsigned long result;
+ const struct i2c_adapter *adap = &priv->adapter;
+
+ status = i801_check_pre(priv);
+ if (status < 0)
+ return status;
+
+ if (priv->features & FEATURE_IRQ) {
+ reinit_completion(&priv->done);
+ outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
+ SMBHSTCNT(priv));
+ result = wait_for_completion_timeout(&priv->done, adap->timeout);
+ return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
+ }
+
+ outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+ status = i801_wait_intr(priv);
+ return i801_check_post(priv, status);
+}
+
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int command)
+{
+ int i, len, status, xact;
+
+ switch (command) {
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ xact = I801_BLOCK_PROC_CALL;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ xact = I801_BLOCK_DATA;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ /* Set block buffer mode */
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+
+ inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0(priv));
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+ }
+
+ status = i801_transaction(priv, xact);
+ if (status)
+ return status;
+
+ if (read_write == I2C_SMBUS_READ ||
+ command == I2C_SMBUS_BLOCK_PROC_CALL) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++)
+ data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+ }
+ return 0;
+}
+
+static void i801_isr_byte_done(struct i801_priv *priv)
+{
+ if (priv->is_read) {
+ /* For SMBus block reads, length is received with first byte */
+ if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
+ (priv->count == 0)) {
+ priv->len = inb_p(SMBHSTDAT0(priv));
+ if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ priv->len);
+ /* FIXME: Recover */
+ priv->len = I2C_SMBUS_BLOCK_MAX;
+ }
+ priv->data[-1] = priv->len;
+ }
+
+ /* Read next byte */
+ if (priv->count < priv->len)
+ priv->data[priv->count++] = inb(SMBBLKDAT(priv));
+ else
+ dev_dbg(&priv->pci_dev->dev,
+ "Discarding extra byte on block read\n");
+
+ /* Set LAST_BYTE for last byte of read transaction */
+ if (priv->count == priv->len - 1)
+ outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
+ SMBHSTCNT(priv));
+ } else if (priv->count < priv->len - 1) {
+ /* Write next byte, except for IRQ after last byte */
+ outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
+ }
+
+ /* Clear BYTE_DONE to continue with next byte */
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+}
+
+static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
+{
+ unsigned short addr;
+
+ addr = inb_p(SMBNTFDADD(priv)) >> 1;
+
+ /*
+ * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba)
+ * always returns 0. Our current implementation doesn't provide
+ * data, so we just ignore it.
+ */
+ i2c_handle_smbus_host_notify(&priv->adapter, addr);
+
+ /* clear Host Notify bit and return */
+ outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+ return IRQ_HANDLED;
+}
+
+/*
+ * There are three kinds of interrupts:
+ *
+ * 1) i801 signals transaction completion with one of these interrupts:
+ * INTR - Success
+ * DEV_ERR - Invalid command, NAK or communication timeout
+ * BUS_ERR - SMI# transaction collision
+ * FAILED - transaction was canceled due to a KILL request
+ * When any of these occur, update ->status and signal completion.
+ * ->status must be cleared before kicking off the next transaction.
+ *
+ * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
+ * occurs for each byte of a byte-by-byte to prepare the next byte.
+ *
+ * 3) Host Notify interrupts
+ */
+static irqreturn_t i801_isr(int irq, void *dev_id)
+{
+ struct i801_priv *priv = dev_id;
+ u16 pcists;
+ u8 status;
+
+ /* Confirm this is our interrupt */
+ pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
+ if (!(pcists & PCI_STATUS_INTERRUPT))
+ return IRQ_NONE;
+
+ if (priv->features & FEATURE_HOST_NOTIFY) {
+ status = inb_p(SMBSLVSTS(priv));
+ if (status & SMBSLVSTS_HST_NTFY_STS)
+ return i801_host_notify_isr(priv);
+ }
+
+ status = inb_p(SMBHSTSTS(priv));
+ if (status & SMBHSTSTS_BYTE_DONE)
+ i801_isr_byte_done(priv);
+
+ /*
+ * Clear remaining IRQ sources: Completion of last command, errors
+ * and the SMB_ALERT signal. SMB_ALERT status is set after signal
+ * assertion independently of the interrupt generation being blocked
+ * or not so clear it always when the status is set.
+ */
+ status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS | SMBHSTSTS_SMBALERT_STS;
+ if (status)
+ outb_p(status, SMBHSTSTS(priv));
+ status &= ~SMBHSTSTS_SMBALERT_STS; /* SMB_ALERT not reported */
+ /*
+ * Report transaction result.
+ * ->status must be cleared before the next transaction is started.
+ */
+ if (status) {
+ priv->status = status;
+ complete(&priv->done);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * For "byte-by-byte" block transactions:
+ * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
+ * I2C read uses cmd=I801_I2C_BLOCK_DATA
+ */
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+ union i2c_smbus_data *data,
+ char read_write, int command)
+{
+ int i, len;
+ int smbcmd;
+ int status;
+ unsigned long result;
+ const struct i2c_adapter *adap = &priv->adapter;
+
+ if (command == I2C_SMBUS_BLOCK_PROC_CALL)
+ return -EOPNOTSUPP;
+
+ status = i801_check_pre(priv);
+ if (status < 0)
+ return status;
+
+ len = data->block[0];
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(len, SMBHSTDAT0(priv));
+ outb_p(data->block[1], SMBBLKDAT(priv));
+ }
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
+ read_write == I2C_SMBUS_READ)
+ smbcmd = I801_I2C_BLOCK_DATA;
+ else
+ smbcmd = I801_BLOCK_DATA;
+
+ if (priv->features & FEATURE_IRQ) {
+ priv->is_read = (read_write == I2C_SMBUS_READ);
+ if (len == 1 && priv->is_read)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ priv->cmd = smbcmd | SMBHSTCNT_INTREN;
+ priv->len = len;
+ priv->count = 0;
+ priv->data = &data->block[1];
+
+ reinit_completion(&priv->done);
+ outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+ result = wait_for_completion_timeout(&priv->done, adap->timeout);
+ return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
+ }
+
+ if (len == 1 && read_write == I2C_SMBUS_READ)
+ smbcmd |= SMBHSTCNT_LAST_BYTE;
+ outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+
+ for (i = 1; i <= len; i++) {
+ status = i801_wait_byte_done(priv);
+ if (status)
+ goto exit;
+
+ if (i == 1 && read_write == I2C_SMBUS_READ
+ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+ len = inb_p(SMBHSTDAT0(priv));
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&priv->pci_dev->dev,
+ "Illegal SMBus block read size %d\n",
+ len);
+ /* Recover */
+ while (inb_p(SMBHSTSTS(priv)) &
+ SMBHSTSTS_HOST_BUSY)
+ outb_p(SMBHSTSTS_BYTE_DONE,
+ SMBHSTSTS(priv));
+ outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+ return -EPROTO;
+ }
+ data->block[0] = len;
+ }
+
+ if (read_write == I2C_SMBUS_READ) {
+ data->block[i] = inb_p(SMBBLKDAT(priv));
+ if (i == len - 1)
+ outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv));
+ }
+
+ if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
+ outb_p(data->block[i+1], SMBBLKDAT(priv));
+
+ /* signals SMBBLKDAT ready */
+ outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
+ }
+
+ status = i801_wait_intr(priv);
+exit:
+ return i801_check_post(priv, status);
+}
+
+/* Block transaction function */
+static int i801_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
+ char read_write, int command)
+{
+ int result = 0;
+ unsigned char hostc;
+
+ if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+ dev_err(&priv->pci_dev->dev,
+ "I2C block read is unsupported!\n");
+ return -EOPNOTSUPP;
+ }
+ }
+
+ /* Experience has shown that the block buffer can only be used for
+ SMBus (not I2C) block transactions, even though the datasheet
+ doesn't mention this limitation. */
+ if ((priv->features & FEATURE_BLOCK_BUFFER) &&
+ command != I2C_SMBUS_I2C_BLOCK_DATA)
+ result = i801_block_transaction_by_block(priv, data,
+ read_write,
+ command);
+ else
+ result = i801_block_transaction_byte_by_byte(priv, data,
+ read_write,
+ command);
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA
+ && read_write == I2C_SMBUS_WRITE) {
+ /* restore saved configuration register value */
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
+ }
+ return result;
+}
+
+/* Return negative errno on error. */
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ int hwpec;
+ int block = 0;
+ int ret, xact;
+ struct i801_priv *priv = i2c_get_adapdata(adap);
+
+ mutex_lock(&priv->acpi_lock);
+ if (priv->acpi_reserved) {
+ mutex_unlock(&priv->acpi_lock);
+ return -EBUSY;
+ }
+
+ pm_runtime_get_sync(&priv->pci_dev->dev);
+
+ hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+ && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ xact = I801_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(command, SMBHSTCMD(priv));
+ xact = I801_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(data->byte, SMBHSTDAT0(priv));
+ xact = I801_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+ }
+ xact = I801_WORD_DATA;
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+ xact = I801_PROC_CALL;
+ read_write = I2C_SMBUS_READ;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+ SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /*
+ * NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading.
+ * However if SPD Write Disable is set (Lynx Point and later),
+ * the read will fail if we don't set the R/#W bit.
+ */
+ outb_p(((addr & 0x7f) << 1) |
+ ((priv->original_hstcfg & SMBHSTCFG_SPD_WD) ?
+ (read_write & 0x01) : 0),
+ SMBHSTADD(priv));
+ if (read_write == I2C_SMBUS_READ) {
+ /* NB: page 240 of ICH5 datasheet also shows
+ * that DATA1 is the cmd field when reading */
+ outb_p(command, SMBHSTDAT1(priv));
+ } else
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ /*
+ * Bit 0 of the slave address register always indicate a write
+ * command.
+ */
+ outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ outb_p(command, SMBHSTCMD(priv));
+ block = 1;
+ break;
+ default:
+ dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+ size);
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (hwpec) /* enable/disable hardware PEC */
+ outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+ else
+ outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+ SMBAUXCTL(priv));
+
+ if (block)
+ ret = i801_block_transaction(priv, data, read_write, size);
+ else
+ ret = i801_transaction(priv, xact);
+
+ /* Some BIOSes don't like it when PEC is enabled at reboot or resume
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
+ if (hwpec || block)
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+ if (block)
+ goto out;
+ if (ret)
+ goto out;
+ if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
+ goto out;
+
+ switch (xact) {
+ case I801_BYTE: /* Result put in SMBHSTDAT0 */
+ case I801_BYTE_DATA:
+ data->byte = inb_p(SMBHSTDAT0(priv));
+ break;
+ case I801_WORD_DATA:
+ case I801_PROC_CALL:
+ data->word = inb_p(SMBHSTDAT0(priv)) +
+ (inb_p(SMBHSTDAT1(priv)) << 8);
+ break;
+ }
+
+out:
+ /*
+ * Unlock the SMBus device for use by BIOS/ACPI,
+ * and clear status flags if not done already.
+ */
+ outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
+
+ pm_runtime_mark_last_busy(&priv->pci_dev->dev);
+ pm_runtime_put_autosuspend(&priv->pci_dev->dev);
+ mutex_unlock(&priv->acpi_lock);
+ return ret;
+}
+
+
+static u32 i801_func(struct i2c_adapter *adapter)
+{
+ struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_PROC_CALL |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+ ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+ ((priv->features & FEATURE_BLOCK_PROC) ?
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) |
+ ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
+ ((priv->features & FEATURE_HOST_NOTIFY) ?
+ I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
+}
+
+static void i801_enable_host_notify(struct i2c_adapter *adapter)
+{
+ struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+ if (!(priv->features & FEATURE_HOST_NOTIFY))
+ return;
+
+ /*
+ * Enable host notify interrupt and block the generation of interrupt
+ * from the SMB_ALERT signal because the driver does not support
+ * SMBus Alert.
+ */
+ outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE |
+ priv->original_slvcmd, SMBSLVCMD(priv));
+
+ /* clear Host Notify bit to allow a new notification */
+ outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
+}
+
+static void i801_disable_host_notify(struct i801_priv *priv)
+{
+ if (!(priv->features & FEATURE_HOST_NOTIFY))
+ return;
+
+ outb_p(priv->original_slvcmd, SMBSLVCMD(priv));
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = i801_access,
+ .functionality = i801_func,
+};
+
+#define FEATURES_ICH5 (FEATURE_BLOCK_PROC | FEATURE_I2C_BLOCK_READ | \
+ FEATURE_IRQ | FEATURE_SMBUS_PEC | \
+ FEATURE_BLOCK_BUFFER | FEATURE_HOST_NOTIFY)
+#define FEATURES_ICH4 (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \
+ FEATURE_HOST_NOTIFY)
+
+static const struct pci_device_id i801_ids[] = {
+ { PCI_DEVICE_DATA(INTEL, 82801AA_3, 0) },
+ { PCI_DEVICE_DATA(INTEL, 82801AB_3, 0) },
+ { PCI_DEVICE_DATA(INTEL, 82801BA_2, 0) },
+ { PCI_DEVICE_DATA(INTEL, 82801CA_3, FEATURE_HOST_NOTIFY) },
+ { PCI_DEVICE_DATA(INTEL, 82801DB_3, FEATURES_ICH4) },
+ { PCI_DEVICE_DATA(INTEL, 82801EB_3, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ESB_4, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ICH6_16, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ICH7_17, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ESB2_17, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ICH8_5, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ICH9_6, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, EP80579_1, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ICH10_4, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, ICH10_5, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, 5_3400_SERIES_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, COUGARPOINT_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF0, FEATURES_ICH5 | FEATURE_IDF) },
+ { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF1, FEATURES_ICH5 | FEATURE_IDF) },
+ { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF2, FEATURES_ICH5 | FEATURE_IDF) },
+ { PCI_DEVICE_DATA(INTEL, DH89XXCC_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, PANTHERPOINT_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, LYNXPOINT_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, LYNXPOINT_LP_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, AVOTON_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS0, FEATURES_ICH5 | FEATURE_IDF) },
+ { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS1, FEATURES_ICH5 | FEATURE_IDF) },
+ { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS2, FEATURES_ICH5 | FEATURE_IDF) },
+ { PCI_DEVICE_DATA(INTEL, COLETOCREEK_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, GEMINILAKE_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_LP_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, BAYTRAIL_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, BRASWELL_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
+ { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
+ { PCI_DEVICE_DATA(INTEL, CDF_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, DNV_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
+ { PCI_DEVICE_DATA(INTEL, EBG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, BROXTON_SMBUS, FEATURES_ICH5) },
+ { PCI_DEVICE_DATA(INTEL, LEWISBURG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
+ { PCI_DEVICE_DATA(INTEL, LEWISBURG_SSKU_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
+ { PCI_DEVICE_DATA(INTEL, KABYLAKE_PCH_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
+ { PCI_DEVICE_DATA(INTEL, CANNONLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, CANNONLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, ICELAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, ICELAKE_N_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, COMETLAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, COMETLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, COMETLAKE_V_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
+ { PCI_DEVICE_DATA(INTEL, ELKHART_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, TIGERLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, TIGERLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, JASPER_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, i801_ids);
+
+#if defined CONFIG_X86 && defined CONFIG_DMI
+static unsigned char apanel_addr;
+
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
+{
+ ssize_t offset;
+ const unsigned char signature[] = "FJKEYINF";
+
+ for (offset = 0; offset < 0x10000; offset += 0x10) {
+ if (check_signature(bios + offset, signature,
+ sizeof(signature)-1))
+ return bios + offset;
+ }
+ return NULL;
+}
+
+static void __init input_apanel_init(void)
+{
+ void __iomem *bios;
+ const void __iomem *p;
+
+ bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+ p = bios_signature(bios);
+ if (p) {
+ /* just use the first address */
+ apanel_addr = readb(p + 8 + 3) >> 1;
+ }
+ iounmap(bios);
+}
+
+struct dmi_onboard_device_info {
+ const char *name;
+ u8 type;
+ unsigned short i2c_addr;
+ const char *i2c_type;
+};
+
+static const struct dmi_onboard_device_info dmi_devices[] = {
+ { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+ { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+ { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void dmi_check_onboard_device(u8 type, const char *name,
+ struct i2c_adapter *adap)
+{
+ int i;
+ struct i2c_board_info info;
+
+ for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+ /* & ~0x80, ignore enabled/disabled bit */
+ if ((type & ~0x80) != dmi_devices[i].type)
+ continue;
+ if (strcasecmp(name, dmi_devices[i].name))
+ continue;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = dmi_devices[i].i2c_addr;
+ strscpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+ i2c_new_client_device(adap, &info);
+ break;
+ }
+}
+
+/* We use our own function to check for onboard devices instead of
+ dmi_find_device() as some buggy BIOS's have the devices we are interested
+ in marked as disabled */
+static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
+{
+ int i, count;
+
+ if (dm->type != 10)
+ return;
+
+ count = (dm->length - sizeof(struct dmi_header)) / 2;
+ for (i = 0; i < count; i++) {
+ const u8 *d = (char *)(dm + 1) + (i * 2);
+ const char *name = ((char *) dm) + dm->length;
+ u8 type = d[0];
+ u8 s = d[1];
+
+ if (!s)
+ continue;
+ s--;
+ while (s > 0 && name[0]) {
+ name += strlen(name) + 1;
+ s--;
+ }
+ if (name[0] == 0) /* Bogus string reference */
+ continue;
+
+ dmi_check_onboard_device(type, name, adap);
+ }
+}
+
+/* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */
+static const char *const acpi_smo8800_ids[] = {
+ "SMO8800",
+ "SMO8801",
+ "SMO8810",
+ "SMO8811",
+ "SMO8820",
+ "SMO8821",
+ "SMO8830",
+ "SMO8831",
+};
+
+static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle,
+ u32 nesting_level,
+ void *context,
+ void **return_value)
+{
+ struct acpi_device_info *info;
+ acpi_status status;
+ char *hid;
+ int i;
+
+ status = acpi_get_object_info(obj_handle, &info);
+ if (ACPI_FAILURE(status))
+ return AE_OK;
+
+ if (!(info->valid & ACPI_VALID_HID))
+ goto smo88xx_not_found;
+
+ hid = info->hardware_id.string;
+ if (!hid)
+ goto smo88xx_not_found;
+
+ i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid);
+ if (i < 0)
+ goto smo88xx_not_found;
+
+ kfree(info);
+
+ *return_value = NULL;
+ return AE_CTRL_TERMINATE;
+
+smo88xx_not_found:
+ kfree(info);
+ return AE_OK;
+}
+
+static bool is_dell_system_with_lis3lv02d(void)
+{
+ void *err = ERR_PTR(-ENOENT);
+
+ if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc."))
+ return false;
+
+ /*
+ * Check that ACPI device SMO88xx is present and is functioning.
+ * Function acpi_get_devices() already filters all ACPI devices
+ * which are not present or are not functioning.
+ * ACPI device SMO88xx represents our ST microelectronics lis3lv02d
+ * accelerometer but unfortunately ACPI does not provide any other
+ * information (like I2C address).
+ */
+ acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err);
+
+ return !IS_ERR(err);
+}
+
+/*
+ * Accelerometer's I2C address is not specified in DMI nor ACPI,
+ * so it is needed to define mapping table based on DMI product names.
+ */
+static const struct {
+ const char *dmi_product_name;
+ unsigned short i2c_addr;
+} dell_lis3lv02d_devices[] = {
+ /*
+ * Dell platform team told us that these Latitude devices have
+ * ST microelectronics accelerometer at I2C address 0x29.
+ */
+ { "Latitude E5250", 0x29 },
+ { "Latitude E5450", 0x29 },
+ { "Latitude E5550", 0x29 },
+ { "Latitude E6440", 0x29 },
+ { "Latitude E6440 ATG", 0x29 },
+ { "Latitude E6540", 0x29 },
+ /*
+ * Additional individual entries were added after verification.
+ */
+ { "Latitude 5480", 0x29 },
+ { "Vostro V131", 0x1d },
+ { "Vostro 5568", 0x29 },
+};
+
+static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
+{
+ struct i2c_board_info info;
+ const char *dmi_product_name;
+ int i;
+
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) {
+ if (strcmp(dmi_product_name,
+ dell_lis3lv02d_devices[i].dmi_product_name) == 0)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) {
+ dev_warn(&priv->pci_dev->dev,
+ "Accelerometer lis3lv02d is present on SMBus but its"
+ " address is unknown, skipping registration\n");
+ return;
+ }
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = dell_lis3lv02d_devices[i].i2c_addr;
+ strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
+ i2c_new_client_device(&priv->adapter, &info);
+}
+
+/* Register optional slaves */
+static void i801_probe_optional_slaves(struct i801_priv *priv)
+{
+ /* Only register slaves on main SMBus channel */
+ if (priv->features & FEATURE_IDF)
+ return;
+
+ if (apanel_addr) {
+ struct i2c_board_info info = {
+ .addr = apanel_addr,
+ .type = "fujitsu_apanel",
+ };
+
+ i2c_new_client_device(&priv->adapter, &info);
+ }
+
+ if (dmi_name_in_vendors("FUJITSU"))
+ dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+
+ if (is_dell_system_with_lis3lv02d())
+ register_dell_lis3lv02d_i2c_device(priv);
+
+ /* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
+ if (!priv->mux_drvdata)
+#endif
+ i2c_register_spd(&priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif /* CONFIG_X86 && CONFIG_DMI */
+
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
+static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03 },
+ .n_values = 2,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
+ .gpio_chip = "gpio_ich",
+ .values = { 0x02, 0x03, 0x01 },
+ .n_values = 3,
+ .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
+ .gpios = { 52, 53 },
+ .n_gpios = 2,
+};
+
+static const struct dmi_system_id mux_dmi_table[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d18,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
+ },
+ .driver_data = &i801_mux_config_asus_z8_d12,
+ },
+ { }
+};
+
+/* Setup multiplexing if needed */
+static void i801_add_mux(struct i801_priv *priv)
+{
+ struct device *dev = &priv->adapter.dev;
+ const struct i801_mux_config *mux_config;
+ struct i2c_mux_gpio_platform_data gpio_data;
+ struct gpiod_lookup_table *lookup;
+ int i;
+
+ if (!priv->mux_drvdata)
+ return;
+ mux_config = priv->mux_drvdata;
+
+ /* Prepare the platform data */
+ memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
+ gpio_data.parent = priv->adapter.nr;
+ gpio_data.values = mux_config->values;
+ gpio_data.n_values = mux_config->n_values;
+ gpio_data.classes = mux_config->classes;
+ gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+ /* Register GPIO descriptor lookup table */
+ lookup = devm_kzalloc(dev,
+ struct_size(lookup, table, mux_config->n_gpios + 1),
+ GFP_KERNEL);
+ if (!lookup)
+ return;
+ lookup->dev_id = "i2c-mux-gpio";
+ for (i = 0; i < mux_config->n_gpios; i++)
+ lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip,
+ mux_config->gpios[i], "mux", 0);
+ gpiod_add_lookup_table(lookup);
+ priv->lookup = lookup;
+
+ /*
+ * Register the mux device, we use PLATFORM_DEVID_NONE here
+ * because since we are referring to the GPIO chip by name we are
+ * anyways in deep trouble if there is more than one of these
+ * devices, and there should likely only be one platform controller
+ * hub.
+ */
+ priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
+ PLATFORM_DEVID_NONE, &gpio_data,
+ sizeof(struct i2c_mux_gpio_platform_data));
+ if (IS_ERR(priv->mux_pdev)) {
+ gpiod_remove_lookup_table(lookup);
+ dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+ }
+}
+
+static void i801_del_mux(struct i801_priv *priv)
+{
+ platform_device_unregister(priv->mux_pdev);
+ gpiod_remove_lookup_table(priv->lookup);
+}
+
+static unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ const struct dmi_system_id *id;
+ const struct i801_mux_config *mux_config;
+ unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ int i;
+
+ id = dmi_first_match(mux_dmi_table);
+ if (id) {
+ /* Remove branch classes from trunk */
+ mux_config = id->driver_data;
+ for (i = 0; i < mux_config->n_values; i++)
+ class &= ~mux_config->classes[i];
+
+ /* Remember for later */
+ priv->mux_drvdata = mux_config;
+ }
+
+ return class;
+}
+#else
+static inline void i801_add_mux(struct i801_priv *priv) { }
+static inline void i801_del_mux(struct i801_priv *priv) { }
+
+static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
+{
+ return I2C_CLASS_HWMON | I2C_CLASS_SPD;
+}
+#endif
+
+static struct platform_device *
+i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
+ struct resource *tco_res)
+{
+ static const struct itco_wdt_platform_data pldata = {
+ .name = "Intel PCH",
+ .version = 4,
+ };
+ struct resource *res;
+ int ret;
+
+ /*
+ * We must access the NO_REBOOT bit over the Primary to Sideband
+ * (P2SB) bridge.
+ */
+
+ res = &tco_res[1];
+ ret = p2sb_bar(pci_dev->bus, 0, res);
+ if (ret)
+ return ERR_PTR(ret);
+
+ if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
+ res->start += SBREG_SMBCTRL_DNV;
+ else
+ res->start += SBREG_SMBCTRL;
+
+ res->end = res->start + 3;
+
+ return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+ tco_res, 2, &pldata, sizeof(pldata));
+}
+
+static struct platform_device *
+i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
+ struct resource *tco_res)
+{
+ static const struct itco_wdt_platform_data pldata = {
+ .name = "Intel PCH",
+ .version = 6,
+ };
+
+ return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
+ tco_res, 1, &pldata, sizeof(pldata));
+}
+
+static void i801_add_tco(struct i801_priv *priv)
+{
+ struct pci_dev *pci_dev = priv->pci_dev;
+ struct resource tco_res[2], *res;
+ u32 tco_base, tco_ctl;
+
+ /* If we have ACPI based watchdog use that instead */
+ if (acpi_has_watchdog())
+ return;
+
+ if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL)))
+ return;
+
+ pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
+ pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
+ if (!(tco_ctl & TCOCTL_EN))
+ return;
+
+ memset(tco_res, 0, sizeof(tco_res));
+ /*
+ * Always populate the main iTCO IO resource here. The second entry
+ * for NO_REBOOT MMIO is filled by the SPT specific function.
+ */
+ res = &tco_res[0];
+ res->start = tco_base & ~1;
+ res->end = res->start + 32 - 1;
+ res->flags = IORESOURCE_IO;
+
+ if (priv->features & FEATURE_TCO_CNL)
+ priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
+ else
+ priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
+
+ if (IS_ERR(priv->tco_pdev))
+ dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
+}
+
+#ifdef CONFIG_ACPI
+static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv,
+ acpi_physical_address address)
+{
+ return address >= priv->smba &&
+ address <= pci_resource_end(priv->pci_dev, SMBBAR);
+}
+
+static acpi_status
+i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
+ u64 *value, void *handler_context, void *region_context)
+{
+ struct i801_priv *priv = handler_context;
+ struct pci_dev *pdev = priv->pci_dev;
+ acpi_status status;
+
+ /*
+ * Once BIOS AML code touches the OpRegion we warn and inhibit any
+ * further access from the driver itself. This device is now owned
+ * by the system firmware.
+ */
+ mutex_lock(&priv->acpi_lock);
+
+ if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
+ priv->acpi_reserved = true;
+
+ dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
+ dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
+
+ /*
+ * BIOS is accessing the host controller so prevent it from
+ * suspending automatically from now on.
+ */
+ pm_runtime_get_sync(&pdev->dev);
+ }
+
+ if ((function & ACPI_IO_MASK) == ACPI_READ)
+ status = acpi_os_read_port(address, (u32 *)value, bits);
+ else
+ status = acpi_os_write_port(address, (u32)*value, bits);
+
+ mutex_unlock(&priv->acpi_lock);
+
+ return status;
+}
+
+static int i801_acpi_probe(struct i801_priv *priv)
+{
+ acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
+ acpi_status status;
+
+ status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO,
+ i801_acpi_io_handler, NULL, priv);
+ if (ACPI_SUCCESS(status))
+ return 0;
+
+ return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]);
+}
+
+static void i801_acpi_remove(struct i801_priv *priv)
+{
+ acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
+
+ acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler);
+}
+#else
+static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
+static inline void i801_acpi_remove(struct i801_priv *priv) { }
+#endif
+
+static void i801_setup_hstcfg(struct i801_priv *priv)
+{
+ unsigned char hstcfg = priv->original_hstcfg;
+
+ hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
+ hstcfg |= SMBHSTCFG_HST_EN;
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
+}
+
+static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int err, i;
+ struct i801_priv *priv;
+
+ priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ i2c_set_adapdata(&priv->adapter, priv);
+ priv->adapter.owner = THIS_MODULE;
+ priv->adapter.class = i801_get_adapter_class(priv);
+ priv->adapter.algo = &smbus_algorithm;
+ priv->adapter.dev.parent = &dev->dev;
+ ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
+ priv->adapter.retries = 3;
+ mutex_init(&priv->acpi_lock);
+
+ priv->pci_dev = dev;
+ priv->features = id->driver_data;
+
+ /* Disable features on user request */
+ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+ if (priv->features & disable_features & (1 << i))
+ dev_notice(&dev->dev, "%s disabled by user\n",
+ i801_feature_names[i]);
+ }
+ priv->features &= ~disable_features;
+
+ err = pcim_enable_device(dev);
+ if (err) {
+ dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+ err);
+ return err;
+ }
+ pcim_pin_device(dev);
+
+ /* Determine the address of the SMBus area */
+ priv->smba = pci_resource_start(dev, SMBBAR);
+ if (!priv->smba) {
+ dev_err(&dev->dev,
+ "SMBus base address uninitialized, upgrade BIOS\n");
+ return -ENODEV;
+ }
+
+ if (i801_acpi_probe(priv))
+ return -ENODEV;
+
+ err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME);
+ if (err) {
+ dev_err(&dev->dev,
+ "Failed to request SMBus region 0x%lx-0x%Lx\n",
+ priv->smba,
+ (unsigned long long)pci_resource_end(dev, SMBBAR));
+ i801_acpi_remove(priv);
+ return err;
+ }
+
+ pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
+ i801_setup_hstcfg(priv);
+ if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
+ dev_info(&dev->dev, "Enabling SMBus device\n");
+
+ if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) {
+ dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+ /* Disable SMBus interrupt feature if SMBus using SMI# */
+ priv->features &= ~FEATURE_IRQ;
+ }
+ if (priv->original_hstcfg & SMBHSTCFG_SPD_WD)
+ dev_info(&dev->dev, "SPD Write Disable is set\n");
+
+ /* Clear special mode bits */
+ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+ outb_p(inb_p(SMBAUXCTL(priv)) &
+ ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+ /* Remember original Interrupt and Host Notify settings */
+ priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL;
+ if (priv->features & FEATURE_HOST_NOTIFY)
+ priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
+
+ /* Default timeout in interrupt mode: 200 ms */
+ priv->adapter.timeout = HZ / 5;
+
+ if (dev->irq == IRQ_NOTCONNECTED)
+ priv->features &= ~FEATURE_IRQ;
+
+ if (priv->features & FEATURE_IRQ) {
+ u16 pcists;
+
+ /* Complain if an interrupt is already pending */
+ pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
+ if (pcists & PCI_STATUS_INTERRUPT)
+ dev_warn(&dev->dev, "An interrupt is pending!\n");
+ }
+
+ if (priv->features & FEATURE_IRQ) {
+ init_completion(&priv->done);
+
+ err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
+ IRQF_SHARED, DRV_NAME, priv);
+ if (err) {
+ dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
+ dev->irq, err);
+ priv->features &= ~FEATURE_IRQ;
+ }
+ }
+ dev_info(&dev->dev, "SMBus using %s\n",
+ priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
+
+ i801_add_tco(priv);
+
+ snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+ "SMBus I801 adapter at %04lx", priv->smba);
+ err = i2c_add_adapter(&priv->adapter);
+ if (err) {
+ platform_device_unregister(priv->tco_pdev);
+ i801_acpi_remove(priv);
+ return err;
+ }
+
+ i801_enable_host_notify(&priv->adapter);
+
+ i801_probe_optional_slaves(priv);
+ /* We ignore errors - multiplexing is optional */
+ i801_add_mux(priv);
+
+ pci_set_drvdata(dev, priv);
+
+ dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
+ pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
+ pm_runtime_use_autosuspend(&dev->dev);
+ pm_runtime_put_autosuspend(&dev->dev);
+ pm_runtime_allow(&dev->dev);
+
+ return 0;
+}
+
+static void i801_remove(struct pci_dev *dev)
+{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+ i801_disable_host_notify(priv);
+ i801_del_mux(priv);
+ i2c_del_adapter(&priv->adapter);
+ i801_acpi_remove(priv);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+
+ platform_device_unregister(priv->tco_pdev);
+
+ /* if acpi_reserved is set then usage_count is incremented already */
+ if (!priv->acpi_reserved)
+ pm_runtime_get_noresume(&dev->dev);
+
+ /*
+ * do not call pci_disable_device(dev) since it can cause hard hangs on
+ * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
+ */
+}
+
+static void i801_shutdown(struct pci_dev *dev)
+{
+ struct i801_priv *priv = pci_get_drvdata(dev);
+
+ /* Restore config registers to avoid hard hang on some systems */
+ outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+ i801_disable_host_notify(priv);
+ pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int i801_suspend(struct device *dev)
+{
+ struct i801_priv *priv = dev_get_drvdata(dev);
+
+ outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+ pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+ return 0;
+}
+
+static int i801_resume(struct device *dev)
+{
+ struct i801_priv *priv = dev_get_drvdata(dev);
+
+ i801_setup_hstcfg(priv);
+ i801_enable_host_notify(&priv->adapter);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume);
+
+static struct pci_driver i801_driver = {
+ .name = DRV_NAME,
+ .id_table = i801_ids,
+ .probe = i801_probe,
+ .remove = i801_remove,
+ .shutdown = i801_shutdown,
+ .driver = {
+ .pm = &i801_pm_ops,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+};
+
+static int __init i2c_i801_init(void)
+{
+ if (dmi_name_in_vendors("FUJITSU"))
+ input_apanel_init();
+ return pci_register_driver(&i801_driver);
+}
+
+static void __exit i2c_i801_exit(void)
+{
+ pci_unregister_driver(&i801_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i801_init);
+module_exit(i2c_i801_exit);
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-02 12:38:19 +0000