summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-mlxbf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-mlxbf.c')
-rw-r--r--drivers/i2c/busses/i2c-mlxbf.c2517
1 files changed, 2517 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
new file mode 100644
index 000000000..1810d5791
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -0,0 +1,2517 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mellanox BlueField I2C bus driver
+ *
+ * Copyright (C) 2020 Mellanox Technologies, Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+/* Defines what functionality is present. */
+#define MLXBF_I2C_FUNC_SMBUS_BLOCK \
+ (I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL)
+
+#define MLXBF_I2C_FUNC_SMBUS_DEFAULT \
+ (I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK | \
+ I2C_FUNC_SMBUS_PROC_CALL)
+
+#define MLXBF_I2C_FUNC_ALL \
+ (MLXBF_I2C_FUNC_SMBUS_DEFAULT | MLXBF_I2C_FUNC_SMBUS_BLOCK | \
+ I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SLAVE)
+
+/* Shared resources info in BlueField platforms. */
+
+#define MLXBF_I2C_COALESCE_TYU_ADDR 0x02801300
+#define MLXBF_I2C_COALESCE_TYU_SIZE 0x010
+
+#define MLXBF_I2C_GPIO_TYU_ADDR 0x02802000
+#define MLXBF_I2C_GPIO_TYU_SIZE 0x100
+
+#define MLXBF_I2C_COREPLL_TYU_ADDR 0x02800358
+#define MLXBF_I2C_COREPLL_TYU_SIZE 0x008
+
+#define MLXBF_I2C_COREPLL_YU_ADDR 0x02800c30
+#define MLXBF_I2C_COREPLL_YU_SIZE 0x00c
+
+#define MLXBF_I2C_COREPLL_RSH_YU_ADDR 0x13409824
+#define MLXBF_I2C_COREPLL_RSH_YU_SIZE 0x00c
+
+#define MLXBF_I2C_SHARED_RES_MAX 3
+
+/*
+ * Note that the following SMBus, CAUSE, GPIO and PLL register addresses
+ * refer to their respective offsets relative to the corresponding
+ * memory-mapped region whose addresses are specified in either the DT or
+ * the ACPI tables or above.
+ */
+
+/*
+ * SMBus Master core clock frequency. Timing configurations are
+ * strongly dependent on the core clock frequency of the SMBus
+ * Master. Default value is set to 400MHz.
+ */
+#define MLXBF_I2C_TYU_PLL_OUT_FREQ (400 * 1000 * 1000)
+/* Reference clock for Bluefield - 156 MHz. */
+#define MLXBF_I2C_PLL_IN_FREQ 156250000ULL
+
+/* Constant used to determine the PLL frequency. */
+#define MLNXBF_I2C_COREPLL_CONST 16384ULL
+
+#define MLXBF_I2C_FREQUENCY_1GHZ 1000000000ULL
+
+/* PLL registers. */
+#define MLXBF_I2C_CORE_PLL_REG1 0x4
+#define MLXBF_I2C_CORE_PLL_REG2 0x8
+
+/* OR cause register. */
+#define MLXBF_I2C_CAUSE_OR_EVTEN0 0x14
+#define MLXBF_I2C_CAUSE_OR_CLEAR 0x18
+
+/* Arbiter Cause Register. */
+#define MLXBF_I2C_CAUSE_ARBITER 0x1c
+
+/*
+ * Cause Status flags. Note that those bits might be considered
+ * as interrupt enabled bits.
+ */
+
+/* Transaction ended with STOP. */
+#define MLXBF_I2C_CAUSE_TRANSACTION_ENDED BIT(0)
+/* Master arbitration lost. */
+#define MLXBF_I2C_CAUSE_M_ARBITRATION_LOST BIT(1)
+/* Unexpected start detected. */
+#define MLXBF_I2C_CAUSE_UNEXPECTED_START BIT(2)
+/* Unexpected stop detected. */
+#define MLXBF_I2C_CAUSE_UNEXPECTED_STOP BIT(3)
+/* Wait for transfer continuation. */
+#define MLXBF_I2C_CAUSE_WAIT_FOR_FW_DATA BIT(4)
+/* Failed to generate STOP. */
+#define MLXBF_I2C_CAUSE_PUT_STOP_FAILED BIT(5)
+/* Failed to generate START. */
+#define MLXBF_I2C_CAUSE_PUT_START_FAILED BIT(6)
+/* Clock toggle completed. */
+#define MLXBF_I2C_CAUSE_CLK_TOGGLE_DONE BIT(7)
+/* Transfer timeout occurred. */
+#define MLXBF_I2C_CAUSE_M_FW_TIMEOUT BIT(8)
+/* Master busy bit reset. */
+#define MLXBF_I2C_CAUSE_M_GW_BUSY_FALL BIT(9)
+
+#define MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK GENMASK(9, 0)
+
+#define MLXBF_I2C_CAUSE_MASTER_STATUS_ERROR \
+ (MLXBF_I2C_CAUSE_M_ARBITRATION_LOST | \
+ MLXBF_I2C_CAUSE_UNEXPECTED_START | \
+ MLXBF_I2C_CAUSE_UNEXPECTED_STOP | \
+ MLXBF_I2C_CAUSE_PUT_STOP_FAILED | \
+ MLXBF_I2C_CAUSE_PUT_START_FAILED | \
+ MLXBF_I2C_CAUSE_CLK_TOGGLE_DONE | \
+ MLXBF_I2C_CAUSE_M_FW_TIMEOUT)
+
+/*
+ * Slave cause status flags. Note that those bits might be considered
+ * as interrupt enabled bits.
+ */
+
+/* Write transaction received successfully. */
+#define MLXBF_I2C_CAUSE_WRITE_SUCCESS BIT(0)
+/* Read transaction received, waiting for response. */
+#define MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE BIT(13)
+/* Slave busy bit reset. */
+#define MLXBF_I2C_CAUSE_S_GW_BUSY_FALL BIT(18)
+
+/* Cause coalesce registers. */
+#define MLXBF_I2C_CAUSE_COALESCE_0 0x00
+
+#define MLXBF_I2C_CAUSE_TYU_SLAVE_BIT 3
+#define MLXBF_I2C_CAUSE_YU_SLAVE_BIT 1
+
+/* Functional enable register. */
+#define MLXBF_I2C_GPIO_0_FUNC_EN_0 0x28
+/* Force OE enable register. */
+#define MLXBF_I2C_GPIO_0_FORCE_OE_EN 0x30
+/*
+ * Note that Smbus GWs are on GPIOs 30:25. Two pins are used to control
+ * SDA/SCL lines:
+ *
+ * SMBUS GW0 -> bits[26:25]
+ * SMBUS GW1 -> bits[28:27]
+ * SMBUS GW2 -> bits[30:29]
+ */
+#define MLXBF_I2C_GPIO_SMBUS_GW_PINS(num) (25 + ((num) << 1))
+
+/* Note that gw_id can be 0,1 or 2. */
+#define MLXBF_I2C_GPIO_SMBUS_GW_MASK(num) \
+ (0xffffffff & (~(0x3 << MLXBF_I2C_GPIO_SMBUS_GW_PINS(num))))
+
+#define MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(num, val) \
+ ((val) & MLXBF_I2C_GPIO_SMBUS_GW_MASK(num))
+
+#define MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(num, val) \
+ ((val) | (0x3 << MLXBF_I2C_GPIO_SMBUS_GW_PINS(num)))
+
+/*
+ * Defines SMBus operating frequency and core clock frequency.
+ * According to ADB files, default values are compliant to 100KHz SMBus
+ * @ 400MHz core clock. The driver should be able to calculate core
+ * frequency based on PLL parameters.
+ */
+#define MLXBF_I2C_COREPLL_FREQ MLXBF_I2C_TYU_PLL_OUT_FREQ
+
+/* Core PLL TYU configuration. */
+#define MLXBF_I2C_COREPLL_CORE_F_TYU_MASK GENMASK(15, 3)
+#define MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK GENMASK(19, 16)
+#define MLXBF_I2C_COREPLL_CORE_R_TYU_MASK GENMASK(25, 20)
+
+/* Core PLL YU configuration. */
+#define MLXBF_I2C_COREPLL_CORE_F_YU_MASK GENMASK(25, 0)
+#define MLXBF_I2C_COREPLL_CORE_OD_YU_MASK GENMASK(3, 0)
+#define MLXBF_I2C_COREPLL_CORE_R_YU_MASK GENMASK(31, 26)
+
+/* SMBus timing parameters. */
+#define MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH 0x00
+#define MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE 0x04
+#define MLXBF_I2C_SMBUS_TIMER_THOLD 0x08
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP 0x0c
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA 0x10
+#define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF 0x14
+#define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT 0x18
+
+#define MLXBF_I2C_SHIFT_0 0
+#define MLXBF_I2C_SHIFT_8 8
+#define MLXBF_I2C_SHIFT_16 16
+#define MLXBF_I2C_SHIFT_24 24
+
+#define MLXBF_I2C_MASK_8 GENMASK(7, 0)
+#define MLXBF_I2C_MASK_16 GENMASK(15, 0)
+
+#define MLXBF_I2C_MST_ADDR_OFFSET 0x200
+
+/* SMBus Master GW. */
+#define MLXBF_I2C_SMBUS_MASTER_GW 0x0
+/* Number of bytes received and sent. */
+#define MLXBF_I2C_YU_SMBUS_RS_BYTES 0x100
+#define MLXBF_I2C_RSH_YU_SMBUS_RS_BYTES 0x10c
+/* Packet error check (PEC) value. */
+#define MLXBF_I2C_SMBUS_MASTER_PEC 0x104
+/* Status bits (ACK/NACK/FW Timeout). */
+#define MLXBF_I2C_SMBUS_MASTER_STATUS 0x108
+/* SMbus Master Finite State Machine. */
+#define MLXBF_I2C_YU_SMBUS_MASTER_FSM 0x110
+#define MLXBF_I2C_RSH_YU_SMBUS_MASTER_FSM 0x100
+
+/* SMBus master GW control bits offset in MLXBF_I2C_SMBUS_MASTER_GW[31:3]. */
+#define MLXBF_I2C_MASTER_LOCK_BIT BIT(31) /* Lock bit. */
+#define MLXBF_I2C_MASTER_BUSY_BIT BIT(30) /* Busy bit. */
+#define MLXBF_I2C_MASTER_START_BIT BIT(29) /* Control start. */
+#define MLXBF_I2C_MASTER_CTL_WRITE_BIT BIT(28) /* Control write phase. */
+#define MLXBF_I2C_MASTER_CTL_READ_BIT BIT(19) /* Control read phase. */
+#define MLXBF_I2C_MASTER_STOP_BIT BIT(3) /* Control stop. */
+
+#define MLXBF_I2C_MASTER_ENABLE \
+ (MLXBF_I2C_MASTER_LOCK_BIT | MLXBF_I2C_MASTER_BUSY_BIT | \
+ MLXBF_I2C_MASTER_START_BIT | MLXBF_I2C_MASTER_STOP_BIT)
+
+#define MLXBF_I2C_MASTER_ENABLE_WRITE \
+ (MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_WRITE_BIT)
+
+#define MLXBF_I2C_MASTER_ENABLE_READ \
+ (MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_READ_BIT)
+
+#define MLXBF_I2C_MASTER_WRITE_SHIFT 21 /* Control write bytes */
+#define MLXBF_I2C_MASTER_SEND_PEC_SHIFT 20 /* Send PEC byte when set to 1 */
+#define MLXBF_I2C_MASTER_PARSE_EXP_SHIFT 11 /* Control parse expected bytes */
+#define MLXBF_I2C_MASTER_SLV_ADDR_SHIFT 12 /* Slave address */
+#define MLXBF_I2C_MASTER_READ_SHIFT 4 /* Control read bytes */
+
+/* SMBus master GW Data descriptor. */
+#define MLXBF_I2C_MASTER_DATA_DESC_ADDR 0x80
+#define MLXBF_I2C_MASTER_DATA_DESC_SIZE 0x80 /* Size in bytes. */
+
+/* Maximum bytes to read/write per SMBus transaction. */
+#define MLXBF_I2C_MASTER_DATA_R_LENGTH MLXBF_I2C_MASTER_DATA_DESC_SIZE
+#define MLXBF_I2C_MASTER_DATA_W_LENGTH (MLXBF_I2C_MASTER_DATA_DESC_SIZE - 1)
+
+/* All bytes were transmitted. */
+#define MLXBF_I2C_SMBUS_STATUS_BYTE_CNT_DONE BIT(0)
+/* NACK received. */
+#define MLXBF_I2C_SMBUS_STATUS_NACK_RCV BIT(1)
+/* Slave's byte count >128 bytes. */
+#define MLXBF_I2C_SMBUS_STATUS_READ_ERR BIT(2)
+/* Timeout occurred. */
+#define MLXBF_I2C_SMBUS_STATUS_FW_TIMEOUT BIT(3)
+
+#define MLXBF_I2C_SMBUS_MASTER_STATUS_MASK GENMASK(3, 0)
+
+#define MLXBF_I2C_SMBUS_MASTER_STATUS_ERROR \
+ (MLXBF_I2C_SMBUS_STATUS_NACK_RCV | \
+ MLXBF_I2C_SMBUS_STATUS_READ_ERR | \
+ MLXBF_I2C_SMBUS_STATUS_FW_TIMEOUT)
+
+#define MLXBF_I2C_SMBUS_MASTER_FSM_STOP_MASK BIT(31)
+#define MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK BIT(15)
+
+#define MLXBF_I2C_SLV_ADDR_OFFSET 0x400
+
+/* SMBus slave GW. */
+#define MLXBF_I2C_SMBUS_SLAVE_GW 0x0
+/* Number of bytes received and sent from/to master. */
+#define MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES 0x100
+/* Packet error check (PEC) value. */
+#define MLXBF_I2C_SMBUS_SLAVE_PEC 0x104
+/* SMBus slave Finite State Machine (FSM). */
+#define MLXBF_I2C_SMBUS_SLAVE_FSM 0x110
+/*
+ * Should be set when all raised causes handled, and cleared by HW on
+ * every new cause.
+ */
+#define MLXBF_I2C_SMBUS_SLAVE_READY 0x12c
+
+/* SMBus slave GW control bits offset in MLXBF_I2C_SMBUS_SLAVE_GW[31:19]. */
+#define MLXBF_I2C_SLAVE_BUSY_BIT BIT(30) /* Busy bit. */
+#define MLXBF_I2C_SLAVE_WRITE_BIT BIT(29) /* Control write enable. */
+
+#define MLXBF_I2C_SLAVE_ENABLE \
+ (MLXBF_I2C_SLAVE_BUSY_BIT | MLXBF_I2C_SLAVE_WRITE_BIT)
+
+#define MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT 22 /* Number of bytes to write. */
+#define MLXBF_I2C_SLAVE_SEND_PEC_SHIFT 21 /* Send PEC byte shift. */
+
+/* SMBus slave GW Data descriptor. */
+#define MLXBF_I2C_SLAVE_DATA_DESC_ADDR 0x80
+#define MLXBF_I2C_SLAVE_DATA_DESC_SIZE 0x80 /* Size in bytes. */
+
+/* SMbus slave configuration registers. */
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG 0x114
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT 16
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT BIT(7)
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK GENMASK(6, 0)
+
+/*
+ * Timeout is given in microsends. Note also that timeout handling is not
+ * exact.
+ */
+#define MLXBF_I2C_SMBUS_TIMEOUT (300 * 1000) /* 300ms */
+#define MLXBF_I2C_SMBUS_LOCK_POLL_TIMEOUT (300 * 1000) /* 300ms */
+
+/* Polling frequency in microseconds. */
+#define MLXBF_I2C_POLL_FREQ_IN_USEC 200
+
+#define MLXBF_I2C_SMBUS_OP_CNT_1 1
+#define MLXBF_I2C_SMBUS_OP_CNT_2 2
+#define MLXBF_I2C_SMBUS_OP_CNT_3 3
+#define MLXBF_I2C_SMBUS_MAX_OP_CNT MLXBF_I2C_SMBUS_OP_CNT_3
+
+/* Helper macro to define an I2C resource parameters. */
+#define MLXBF_I2C_RES_PARAMS(addr, size, str) \
+ { \
+ .start = (addr), \
+ .end = (addr) + (size) - 1, \
+ .name = (str) \
+ }
+
+enum {
+ MLXBF_I2C_TIMING_100KHZ = 100000,
+ MLXBF_I2C_TIMING_400KHZ = 400000,
+ MLXBF_I2C_TIMING_1000KHZ = 1000000,
+};
+
+enum {
+ MLXBF_I2C_F_READ = BIT(0),
+ MLXBF_I2C_F_WRITE = BIT(1),
+ MLXBF_I2C_F_NORESTART = BIT(3),
+ MLXBF_I2C_F_SMBUS_OPERATION = BIT(4),
+ MLXBF_I2C_F_SMBUS_BLOCK = BIT(5),
+ MLXBF_I2C_F_SMBUS_PEC = BIT(6),
+ MLXBF_I2C_F_SMBUS_PROCESS_CALL = BIT(7),
+};
+
+/* Mellanox BlueField chip type. */
+enum mlxbf_i2c_chip_type {
+ MLXBF_I2C_CHIP_TYPE_1, /* Mellanox BlueField-1 chip. */
+ MLXBF_I2C_CHIP_TYPE_2, /* Mellanox BlueField-2 chip. */
+ MLXBF_I2C_CHIP_TYPE_3 /* Mellanox BlueField-3 chip. */
+};
+
+/* List of chip resources that are being accessed by the driver. */
+enum {
+ MLXBF_I2C_SMBUS_RES,
+ MLXBF_I2C_MST_CAUSE_RES,
+ MLXBF_I2C_SLV_CAUSE_RES,
+ MLXBF_I2C_COALESCE_RES,
+ MLXBF_I2C_SMBUS_TIMER_RES,
+ MLXBF_I2C_SMBUS_MST_RES,
+ MLXBF_I2C_SMBUS_SLV_RES,
+ MLXBF_I2C_COREPLL_RES,
+ MLXBF_I2C_GPIO_RES,
+ MLXBF_I2C_END_RES
+};
+
+/* Encapsulates timing parameters. */
+struct mlxbf_i2c_timings {
+ u16 scl_high; /* Clock high period. */
+ u16 scl_low; /* Clock low period. */
+ u8 sda_rise; /* Data rise time. */
+ u8 sda_fall; /* Data fall time. */
+ u8 scl_rise; /* Clock rise time. */
+ u8 scl_fall; /* Clock fall time. */
+ u16 hold_start; /* Hold time after (REPEATED) START. */
+ u16 hold_data; /* Data hold time. */
+ u16 setup_start; /* REPEATED START condition setup time. */
+ u16 setup_stop; /* STOP condition setup time. */
+ u16 setup_data; /* Data setup time. */
+ u16 pad; /* Padding. */
+ u16 buf; /* Bus free time between STOP and START. */
+ u16 thigh_max; /* Thigh max. */
+ u32 timeout; /* Detect clock low timeout. */
+};
+
+struct mlxbf_i2c_smbus_operation {
+ u32 flags;
+ u32 length; /* Buffer length in bytes. */
+ u8 *buffer;
+};
+
+struct mlxbf_i2c_smbus_request {
+ u8 slave;
+ u8 operation_cnt;
+ struct mlxbf_i2c_smbus_operation operation[MLXBF_I2C_SMBUS_MAX_OP_CNT];
+};
+
+struct mlxbf_i2c_resource {
+ void __iomem *io;
+ struct resource *params;
+ struct mutex *lock; /* Mutex to protect mlxbf_i2c_resource. */
+ u8 type;
+};
+
+struct mlxbf_i2c_chip_info {
+ enum mlxbf_i2c_chip_type type;
+ /* Chip shared resources that are being used by the I2C controller. */
+ struct mlxbf_i2c_resource *shared_res[MLXBF_I2C_SHARED_RES_MAX];
+
+ /* Callback to calculate the core PLL frequency. */
+ u64 (*calculate_freq)(struct mlxbf_i2c_resource *corepll_res);
+
+ /* Registers' address offset */
+ u32 smbus_master_rs_bytes_off;
+ u32 smbus_master_fsm_off;
+};
+
+struct mlxbf_i2c_priv {
+ const struct mlxbf_i2c_chip_info *chip;
+ struct i2c_adapter adap;
+ struct mlxbf_i2c_resource *smbus;
+ struct mlxbf_i2c_resource *timer;
+ struct mlxbf_i2c_resource *mst;
+ struct mlxbf_i2c_resource *slv;
+ struct mlxbf_i2c_resource *mst_cause;
+ struct mlxbf_i2c_resource *slv_cause;
+ struct mlxbf_i2c_resource *coalesce;
+ u64 frequency; /* Core frequency in Hz. */
+ int bus; /* Physical bus identifier. */
+ int irq;
+ struct i2c_client *slave[MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT];
+ u32 resource_version;
+};
+
+/* Core PLL frequency. */
+static u64 mlxbf_i2c_corepll_frequency;
+
+static struct resource mlxbf_i2c_coalesce_tyu_params =
+ MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COALESCE_TYU_ADDR,
+ MLXBF_I2C_COALESCE_TYU_SIZE,
+ "COALESCE_MEM");
+static struct resource mlxbf_i2c_corepll_tyu_params =
+ MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_TYU_ADDR,
+ MLXBF_I2C_COREPLL_TYU_SIZE,
+ "COREPLL_MEM");
+static struct resource mlxbf_i2c_corepll_yu_params =
+ MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_YU_ADDR,
+ MLXBF_I2C_COREPLL_YU_SIZE,
+ "COREPLL_MEM");
+static struct resource mlxbf_i2c_corepll_rsh_yu_params =
+ MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_RSH_YU_ADDR,
+ MLXBF_I2C_COREPLL_RSH_YU_SIZE,
+ "COREPLL_MEM");
+static struct resource mlxbf_i2c_gpio_tyu_params =
+ MLXBF_I2C_RES_PARAMS(MLXBF_I2C_GPIO_TYU_ADDR,
+ MLXBF_I2C_GPIO_TYU_SIZE,
+ "GPIO_MEM");
+
+static struct mutex mlxbf_i2c_coalesce_lock;
+static struct mutex mlxbf_i2c_corepll_lock;
+static struct mutex mlxbf_i2c_gpio_lock;
+
+static struct mlxbf_i2c_resource mlxbf_i2c_coalesce_res[] = {
+ [MLXBF_I2C_CHIP_TYPE_1] = {
+ .params = &mlxbf_i2c_coalesce_tyu_params,
+ .lock = &mlxbf_i2c_coalesce_lock,
+ .type = MLXBF_I2C_COALESCE_RES
+ },
+ {}
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_corepll_res[] = {
+ [MLXBF_I2C_CHIP_TYPE_1] = {
+ .params = &mlxbf_i2c_corepll_tyu_params,
+ .lock = &mlxbf_i2c_corepll_lock,
+ .type = MLXBF_I2C_COREPLL_RES
+ },
+ [MLXBF_I2C_CHIP_TYPE_2] = {
+ .params = &mlxbf_i2c_corepll_yu_params,
+ .lock = &mlxbf_i2c_corepll_lock,
+ .type = MLXBF_I2C_COREPLL_RES,
+ },
+ [MLXBF_I2C_CHIP_TYPE_3] = {
+ .params = &mlxbf_i2c_corepll_rsh_yu_params,
+ .lock = &mlxbf_i2c_corepll_lock,
+ .type = MLXBF_I2C_COREPLL_RES,
+ }
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_gpio_res[] = {
+ [MLXBF_I2C_CHIP_TYPE_1] = {
+ .params = &mlxbf_i2c_gpio_tyu_params,
+ .lock = &mlxbf_i2c_gpio_lock,
+ .type = MLXBF_I2C_GPIO_RES
+ },
+ {}
+};
+
+static u8 mlxbf_i2c_bus_count;
+
+static struct mutex mlxbf_i2c_bus_lock;
+
+/*
+ * Function to poll a set of bits at a specific address; it checks whether
+ * the bits are equal to zero when eq_zero is set to 'true', and not equal
+ * to zero when eq_zero is set to 'false'.
+ * Note that the timeout is given in microseconds.
+ */
+static u32 mlxbf_i2c_poll(void __iomem *io, u32 addr, u32 mask,
+ bool eq_zero, u32 timeout)
+{
+ u32 bits;
+
+ timeout = (timeout / MLXBF_I2C_POLL_FREQ_IN_USEC) + 1;
+
+ do {
+ bits = readl(io + addr) & mask;
+ if (eq_zero ? bits == 0 : bits != 0)
+ return eq_zero ? 1 : bits;
+ udelay(MLXBF_I2C_POLL_FREQ_IN_USEC);
+ } while (timeout-- != 0);
+
+ return 0;
+}
+
+/*
+ * SW must make sure that the SMBus Master GW is idle before starting
+ * a transaction. Accordingly, this function polls the Master FSM stop
+ * bit; it returns false when the bit is asserted, true if not.
+ */
+static bool mlxbf_i2c_smbus_master_wait_for_idle(struct mlxbf_i2c_priv *priv)
+{
+ u32 mask = MLXBF_I2C_SMBUS_MASTER_FSM_STOP_MASK;
+ u32 addr = priv->chip->smbus_master_fsm_off;
+ u32 timeout = MLXBF_I2C_SMBUS_TIMEOUT;
+
+ if (mlxbf_i2c_poll(priv->mst->io, addr, mask, true, timeout))
+ return true;
+
+ return false;
+}
+
+/*
+ * wait for the lock to be released before acquiring it.
+ */
+static bool mlxbf_i2c_smbus_master_lock(struct mlxbf_i2c_priv *priv)
+{
+ if (mlxbf_i2c_poll(priv->mst->io, MLXBF_I2C_SMBUS_MASTER_GW,
+ MLXBF_I2C_MASTER_LOCK_BIT, true,
+ MLXBF_I2C_SMBUS_LOCK_POLL_TIMEOUT))
+ return true;
+
+ return false;
+}
+
+static void mlxbf_i2c_smbus_master_unlock(struct mlxbf_i2c_priv *priv)
+{
+ /* Clear the gw to clear the lock */
+ writel(0, priv->mst->io + MLXBF_I2C_SMBUS_MASTER_GW);
+}
+
+static bool mlxbf_i2c_smbus_transaction_success(u32 master_status,
+ u32 cause_status)
+{
+ /*
+ * When transaction ended with STOP, all bytes were transmitted,
+ * and no NACK received, then the transaction ended successfully.
+ * On the other hand, when the GW is configured with the stop bit
+ * de-asserted then the SMBus expects the following GW configuration
+ * for transfer continuation.
+ */
+ if ((cause_status & MLXBF_I2C_CAUSE_WAIT_FOR_FW_DATA) ||
+ ((cause_status & MLXBF_I2C_CAUSE_TRANSACTION_ENDED) &&
+ (master_status & MLXBF_I2C_SMBUS_STATUS_BYTE_CNT_DONE) &&
+ !(master_status & MLXBF_I2C_SMBUS_STATUS_NACK_RCV)))
+ return true;
+
+ return false;
+}
+
+/*
+ * Poll SMBus master status and return transaction status,
+ * i.e. whether succeeded or failed. I2C and SMBus fault codes
+ * are returned as negative numbers from most calls, with zero
+ * or some positive number indicating a non-fault return.
+ */
+static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv)
+{
+ u32 master_status_bits;
+ u32 cause_status_bits;
+
+ /*
+ * GW busy bit is raised by the driver and cleared by the HW
+ * when the transaction is completed. The busy bit is a good
+ * indicator of transaction status. So poll the busy bit, and
+ * then read the cause and master status bits to determine if
+ * errors occurred during the transaction.
+ */
+ mlxbf_i2c_poll(priv->mst->io, MLXBF_I2C_SMBUS_MASTER_GW,
+ MLXBF_I2C_MASTER_BUSY_BIT, true,
+ MLXBF_I2C_SMBUS_TIMEOUT);
+
+ /* Read cause status bits. */
+ cause_status_bits = readl(priv->mst_cause->io +
+ MLXBF_I2C_CAUSE_ARBITER);
+ cause_status_bits &= MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK;
+
+ /*
+ * Parse both Cause and Master GW bits, then return transaction status.
+ */
+
+ master_status_bits = readl(priv->mst->io +
+ MLXBF_I2C_SMBUS_MASTER_STATUS);
+ master_status_bits &= MLXBF_I2C_SMBUS_MASTER_STATUS_MASK;
+
+ if (mlxbf_i2c_smbus_transaction_success(master_status_bits,
+ cause_status_bits))
+ return 0;
+
+ /*
+ * In case of timeout on GW busy, the ISR will clear busy bit but
+ * transaction ended bits cause will not be set so the transaction
+ * fails. Then, we must check Master GW status bits.
+ */
+ if ((master_status_bits & MLXBF_I2C_SMBUS_MASTER_STATUS_ERROR) &&
+ (cause_status_bits & (MLXBF_I2C_CAUSE_TRANSACTION_ENDED |
+ MLXBF_I2C_CAUSE_M_GW_BUSY_FALL)))
+ return -EIO;
+
+ if (cause_status_bits & MLXBF_I2C_CAUSE_MASTER_STATUS_ERROR)
+ return -EAGAIN;
+
+ return -ETIMEDOUT;
+}
+
+static void mlxbf_i2c_smbus_write_data(struct mlxbf_i2c_priv *priv,
+ const u8 *data, u8 length, u32 addr,
+ bool is_master)
+{
+ u8 offset, aligned_length;
+ u32 data32;
+
+ aligned_length = round_up(length, 4);
+
+ /*
+ * Copy data bytes from 4-byte aligned source buffer.
+ * Data copied to the Master GW Data Descriptor MUST be shifted
+ * left so the data starts at the MSB of the descriptor registers
+ * as required by the underlying hardware. Enable byte swapping
+ * when writing data bytes to the 32 * 32-bit HW Data registers
+ * a.k.a Master GW Data Descriptor.
+ */
+ for (offset = 0; offset < aligned_length; offset += sizeof(u32)) {
+ data32 = *((u32 *)(data + offset));
+ if (is_master)
+ iowrite32be(data32, priv->mst->io + addr + offset);
+ else
+ iowrite32be(data32, priv->slv->io + addr + offset);
+ }
+}
+
+static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv,
+ u8 *data, u8 length, u32 addr,
+ bool is_master)
+{
+ u32 data32, mask;
+ u8 byte, offset;
+
+ mask = sizeof(u32) - 1;
+
+ /*
+ * Data bytes in the Master GW Data Descriptor are shifted left
+ * so the data starts at the MSB of the descriptor registers as
+ * set by the underlying hardware. Enable byte swapping while
+ * reading data bytes from the 32 * 32-bit HW Data registers
+ * a.k.a Master GW Data Descriptor.
+ */
+
+ for (offset = 0; offset < (length & ~mask); offset += sizeof(u32)) {
+ if (is_master)
+ data32 = ioread32be(priv->mst->io + addr + offset);
+ else
+ data32 = ioread32be(priv->slv->io + addr + offset);
+ *((u32 *)(data + offset)) = data32;
+ }
+
+ if (!(length & mask))
+ return;
+
+ if (is_master)
+ data32 = ioread32be(priv->mst->io + addr + offset);
+ else
+ data32 = ioread32be(priv->slv->io + addr + offset);
+
+ for (byte = 0; byte < (length & mask); byte++) {
+ data[offset + byte] = data32 & GENMASK(7, 0);
+ data32 = ror32(data32, MLXBF_I2C_SHIFT_8);
+ }
+}
+
+static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave,
+ u8 len, u8 block_en, u8 pec_en, bool read)
+{
+ u32 command;
+
+ /* Set Master GW control word. */
+ if (read) {
+ command = MLXBF_I2C_MASTER_ENABLE_READ;
+ command |= rol32(len, MLXBF_I2C_MASTER_READ_SHIFT);
+ } else {
+ command = MLXBF_I2C_MASTER_ENABLE_WRITE;
+ command |= rol32(len, MLXBF_I2C_MASTER_WRITE_SHIFT);
+ }
+ command |= rol32(slave, MLXBF_I2C_MASTER_SLV_ADDR_SHIFT);
+ command |= rol32(block_en, MLXBF_I2C_MASTER_PARSE_EXP_SHIFT);
+ command |= rol32(pec_en, MLXBF_I2C_MASTER_SEND_PEC_SHIFT);
+
+ /* Clear status bits. */
+ writel(0x0, priv->mst->io + MLXBF_I2C_SMBUS_MASTER_STATUS);
+ /* Set the cause data. */
+ writel(~0x0, priv->mst_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR);
+ /* Zero PEC byte. */
+ writel(0x0, priv->mst->io + MLXBF_I2C_SMBUS_MASTER_PEC);
+ /* Zero byte count. */
+ writel(0x0, priv->mst->io + priv->chip->smbus_master_rs_bytes_off);
+
+ /* GW activation. */
+ writel(command, priv->mst->io + MLXBF_I2C_SMBUS_MASTER_GW);
+
+ /*
+ * Poll master status and check status bits. An ACK is sent when
+ * completing writing data to the bus (Master 'byte_count_done' bit
+ * is set to 1).
+ */
+ return mlxbf_i2c_smbus_check_status(priv);
+}
+
+static int
+mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
+ struct mlxbf_i2c_smbus_request *request)
+{
+ u8 data_desc[MLXBF_I2C_MASTER_DATA_DESC_SIZE] = { 0 };
+ u8 op_idx, data_idx, data_len, write_len, read_len;
+ struct mlxbf_i2c_smbus_operation *operation;
+ u8 read_en, write_en, block_en, pec_en;
+ u8 slave, flags, addr;
+ u8 *read_buf;
+ int ret = 0;
+
+ if (request->operation_cnt > MLXBF_I2C_SMBUS_MAX_OP_CNT)
+ return -EINVAL;
+
+ read_buf = NULL;
+ data_idx = 0;
+ read_en = 0;
+ write_en = 0;
+ write_len = 0;
+ read_len = 0;
+ block_en = 0;
+ pec_en = 0;
+ slave = request->slave & GENMASK(6, 0);
+ addr = slave << 1;
+
+ /*
+ * Try to acquire the smbus gw lock before any reads of the GW register since
+ * a read sets the lock.
+ */
+ if (WARN_ON(!mlxbf_i2c_smbus_master_lock(priv)))
+ return -EBUSY;
+
+ /* Check whether the HW is idle */
+ if (WARN_ON(!mlxbf_i2c_smbus_master_wait_for_idle(priv))) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
+ /* Set first byte. */
+ data_desc[data_idx++] = addr;
+
+ for (op_idx = 0; op_idx < request->operation_cnt; op_idx++) {
+ operation = &request->operation[op_idx];
+ flags = operation->flags;
+
+ /*
+ * Note that read and write operations might be handled by a
+ * single command. If the MLXBF_I2C_F_SMBUS_OPERATION is set
+ * then write command byte and set the optional SMBus specific
+ * bits such as block_en and pec_en. These bits MUST be
+ * submitted by the first operation only.
+ */
+ if (op_idx == 0 && flags & MLXBF_I2C_F_SMBUS_OPERATION) {
+ block_en = flags & MLXBF_I2C_F_SMBUS_BLOCK;
+ pec_en = flags & MLXBF_I2C_F_SMBUS_PEC;
+ }
+
+ if (flags & MLXBF_I2C_F_WRITE) {
+ write_en = 1;
+ write_len += operation->length;
+ if (data_idx + operation->length >
+ MLXBF_I2C_MASTER_DATA_DESC_SIZE) {
+ ret = -ENOBUFS;
+ goto out_unlock;
+ }
+ memcpy(data_desc + data_idx,
+ operation->buffer, operation->length);
+ data_idx += operation->length;
+ }
+ /*
+ * We assume that read operations are performed only once per
+ * SMBus transaction. *TBD* protect this statement so it won't
+ * be executed twice? or return an error if we try to read more
+ * than once?
+ */
+ if (flags & MLXBF_I2C_F_READ) {
+ read_en = 1;
+ /* Subtract 1 as required by HW. */
+ read_len = operation->length - 1;
+ read_buf = operation->buffer;
+ }
+ }
+
+ /* Set Master GW data descriptor. */
+ data_len = write_len + 1; /* Add one byte of the slave address. */
+ /*
+ * Note that data_len cannot be 0. Indeed, the slave address byte
+ * must be written to the data registers.
+ */
+ mlxbf_i2c_smbus_write_data(priv, (const u8 *)data_desc, data_len,
+ MLXBF_I2C_MASTER_DATA_DESC_ADDR, true);
+
+ if (write_en) {
+ ret = mlxbf_i2c_smbus_enable(priv, slave, write_len, block_en,
+ pec_en, 0);
+ if (ret)
+ goto out_unlock;
+ }
+
+ if (read_en) {
+ /* Write slave address to Master GW data descriptor. */
+ mlxbf_i2c_smbus_write_data(priv, (const u8 *)&addr, 1,
+ MLXBF_I2C_MASTER_DATA_DESC_ADDR, true);
+ ret = mlxbf_i2c_smbus_enable(priv, slave, read_len, block_en,
+ pec_en, 1);
+ if (!ret) {
+ /* Get Master GW data descriptor. */
+ mlxbf_i2c_smbus_read_data(priv, data_desc, read_len + 1,
+ MLXBF_I2C_MASTER_DATA_DESC_ADDR, true);
+
+ /* Get data from Master GW data descriptor. */
+ memcpy(read_buf, data_desc, read_len + 1);
+ }
+
+ /*
+ * After a read operation the SMBus FSM ps (present state)
+ * needs to be 'manually' reset. This should be removed in
+ * next tag integration.
+ */
+ writel(MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK,
+ priv->mst->io + priv->chip->smbus_master_fsm_off);
+ }
+
+out_unlock:
+ mlxbf_i2c_smbus_master_unlock(priv);
+
+ return ret;
+}
+
+/* I2C SMBus protocols. */
+
+static void
+mlxbf_i2c_smbus_quick_command(struct mlxbf_i2c_smbus_request *request,
+ u8 read)
+{
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_1;
+
+ request->operation[0].length = 0;
+ request->operation[0].flags = MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= read ? MLXBF_I2C_F_READ : 0;
+}
+
+static void mlxbf_i2c_smbus_byte_func(struct mlxbf_i2c_smbus_request *request,
+ u8 *data, bool read, bool pec_check)
+{
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_1;
+
+ request->operation[0].length = 1;
+ request->operation[0].length += pec_check;
+
+ request->operation[0].flags = MLXBF_I2C_F_SMBUS_OPERATION;
+ request->operation[0].flags |= read ?
+ MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+
+ request->operation[0].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_data_byte_func(struct mlxbf_i2c_smbus_request *request,
+ u8 *command, u8 *data, bool read, bool pec_check)
+{
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+ request->operation[0].length = 1;
+ request->operation[0].flags =
+ MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+ request->operation[0].buffer = command;
+
+ request->operation[1].length = 1;
+ request->operation[1].length += pec_check;
+ request->operation[1].flags = read ?
+ MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+ request->operation[1].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_data_word_func(struct mlxbf_i2c_smbus_request *request,
+ u8 *command, u8 *data, bool read, bool pec_check)
+{
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+ request->operation[0].length = 1;
+ request->operation[0].flags =
+ MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+ request->operation[0].buffer = command;
+
+ request->operation[1].length = 2;
+ request->operation[1].length += pec_check;
+ request->operation[1].flags = read ?
+ MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+ request->operation[1].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_i2c_block_func(struct mlxbf_i2c_smbus_request *request,
+ u8 *command, u8 *data, u8 *data_len, bool read,
+ bool pec_check)
+{
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+ request->operation[0].length = 1;
+ request->operation[0].flags =
+ MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+ request->operation[0].buffer = command;
+
+ /*
+ * As specified in the standard, the max number of bytes to read/write
+ * per block operation is 32 bytes. In Golan code, the controller can
+ * read up to 128 bytes and write up to 127 bytes.
+ */
+ request->operation[1].length =
+ (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+ I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+ request->operation[1].flags = read ?
+ MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+ /*
+ * Skip the first data byte, which corresponds to the number of bytes
+ * to read/write.
+ */
+ request->operation[1].buffer = data + 1;
+
+ *data_len = request->operation[1].length;
+
+ /* Set the number of byte to read. This will be used by userspace. */
+ if (read)
+ data[0] = *data_len;
+}
+
+static void mlxbf_i2c_smbus_block_func(struct mlxbf_i2c_smbus_request *request,
+ u8 *command, u8 *data, u8 *data_len,
+ bool read, bool pec_check)
+{
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+ request->operation[0].length = 1;
+ request->operation[0].flags =
+ MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+ request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+ request->operation[0].buffer = command;
+
+ request->operation[1].length =
+ (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+ I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+ request->operation[1].flags = read ?
+ MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+ request->operation[1].buffer = data + 1;
+
+ *data_len = request->operation[1].length;
+
+ /* Set the number of bytes to read. This will be used by userspace. */
+ if (read)
+ data[0] = *data_len;
+}
+
+static void
+mlxbf_i2c_smbus_process_call_func(struct mlxbf_i2c_smbus_request *request,
+ u8 *command, u8 *data, bool pec_check)
+{
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_3;
+
+ request->operation[0].length = 1;
+ request->operation[0].flags =
+ MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+ request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+ request->operation[0].buffer = command;
+
+ request->operation[1].length = 2;
+ request->operation[1].flags = MLXBF_I2C_F_WRITE;
+ request->operation[1].buffer = data;
+
+ request->operation[2].length = 3;
+ request->operation[2].flags = MLXBF_I2C_F_READ;
+ request->operation[2].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_blk_process_call_func(struct mlxbf_i2c_smbus_request *request,
+ u8 *command, u8 *data, u8 *data_len,
+ bool pec_check)
+{
+ u32 length;
+
+ request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_3;
+
+ request->operation[0].length = 1;
+ request->operation[0].flags =
+ MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+ request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+ request->operation[0].flags |= (pec_check) ? MLXBF_I2C_F_SMBUS_PEC : 0;
+ request->operation[0].buffer = command;
+
+ length = (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+ I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+
+ request->operation[1].length = length - pec_check;
+ request->operation[1].flags = MLXBF_I2C_F_WRITE;
+ request->operation[1].buffer = data;
+
+ request->operation[2].length = length;
+ request->operation[2].flags = MLXBF_I2C_F_READ;
+ request->operation[2].buffer = data;
+
+ *data_len = length; /* including PEC byte. */
+}
+
+/* Initialization functions. */
+
+static bool mlxbf_i2c_has_chip_type(struct mlxbf_i2c_priv *priv, u8 type)
+{
+ return priv->chip->type == type;
+}
+
+static struct mlxbf_i2c_resource *
+mlxbf_i2c_get_shared_resource(struct mlxbf_i2c_priv *priv, u8 type)
+{
+ const struct mlxbf_i2c_chip_info *chip = priv->chip;
+ struct mlxbf_i2c_resource *res;
+ u8 res_idx = 0;
+
+ for (res_idx = 0; res_idx < MLXBF_I2C_SHARED_RES_MAX; res_idx++) {
+ res = chip->shared_res[res_idx];
+ if (res && res->type == type)
+ return res;
+ }
+
+ return NULL;
+}
+
+static int mlxbf_i2c_init_resource(struct platform_device *pdev,
+ struct mlxbf_i2c_resource **res,
+ u8 type)
+{
+ struct mlxbf_i2c_resource *tmp_res;
+ struct device *dev = &pdev->dev;
+
+ if (!res || *res || type >= MLXBF_I2C_END_RES)
+ return -EINVAL;
+
+ tmp_res = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_resource),
+ GFP_KERNEL);
+ if (!tmp_res)
+ return -ENOMEM;
+
+ tmp_res->params = platform_get_resource(pdev, IORESOURCE_MEM, type);
+ if (!tmp_res->params) {
+ devm_kfree(dev, tmp_res);
+ return -EIO;
+ }
+
+ tmp_res->io = devm_ioremap_resource(dev, tmp_res->params);
+ if (IS_ERR(tmp_res->io)) {
+ devm_kfree(dev, tmp_res);
+ return PTR_ERR(tmp_res->io);
+ }
+
+ tmp_res->type = type;
+
+ *res = tmp_res;
+
+ return 0;
+}
+
+static u32 mlxbf_i2c_get_ticks(struct mlxbf_i2c_priv *priv, u64 nanoseconds,
+ bool minimum)
+{
+ u64 frequency;
+ u32 ticks;
+
+ /*
+ * Compute ticks as follow:
+ *
+ * Ticks
+ * Time = --------- x 10^9 => Ticks = Time x Frequency x 10^-9
+ * Frequency
+ */
+ frequency = priv->frequency;
+ ticks = (nanoseconds * frequency) / MLXBF_I2C_FREQUENCY_1GHZ;
+ /*
+ * The number of ticks is rounded down and if minimum is equal to 1
+ * then add one tick.
+ */
+ if (minimum)
+ ticks++;
+
+ return ticks;
+}
+
+static u32 mlxbf_i2c_set_timer(struct mlxbf_i2c_priv *priv, u64 nsec, bool opt,
+ u32 mask, u8 shift)
+{
+ u32 val = (mlxbf_i2c_get_ticks(priv, nsec, opt) & mask) << shift;
+
+ return val;
+}
+
+static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv,
+ const struct mlxbf_i2c_timings *timings)
+{
+ u32 timer;
+
+ timer = mlxbf_i2c_set_timer(priv, timings->scl_high,
+ false, MLXBF_I2C_MASK_16,
+ MLXBF_I2C_SHIFT_0);
+ timer |= mlxbf_i2c_set_timer(priv, timings->scl_low,
+ false, MLXBF_I2C_MASK_16,
+ MLXBF_I2C_SHIFT_16);
+ writel(timer, priv->timer->io +
+ MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH);
+
+ timer = mlxbf_i2c_set_timer(priv, timings->sda_rise, false,
+ MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_0);
+ timer |= mlxbf_i2c_set_timer(priv, timings->sda_fall, false,
+ MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_8);
+ timer |= mlxbf_i2c_set_timer(priv, timings->scl_rise, false,
+ MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_16);
+ timer |= mlxbf_i2c_set_timer(priv, timings->scl_fall, false,
+ MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_24);
+ writel(timer, priv->timer->io +
+ MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE);
+
+ timer = mlxbf_i2c_set_timer(priv, timings->hold_start, true,
+ MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+ timer |= mlxbf_i2c_set_timer(priv, timings->hold_data, true,
+ MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_TIMER_THOLD);
+
+ timer = mlxbf_i2c_set_timer(priv, timings->setup_start, true,
+ MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+ timer |= mlxbf_i2c_set_timer(priv, timings->setup_stop, true,
+ MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+ writel(timer, priv->timer->io +
+ MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP);
+
+ timer = mlxbf_i2c_set_timer(priv, timings->setup_data, true,
+ MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA);
+
+ timer = mlxbf_i2c_set_timer(priv, timings->buf, false,
+ MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+ timer |= mlxbf_i2c_set_timer(priv, timings->thigh_max, false,
+ MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_THIGH_MAX_TBUF);
+
+ timer = timings->timeout;
+ writel(timer, priv->timer->io + MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT);
+}
+
+enum mlxbf_i2c_timings_config {
+ MLXBF_I2C_TIMING_CONFIG_100KHZ,
+ MLXBF_I2C_TIMING_CONFIG_400KHZ,
+ MLXBF_I2C_TIMING_CONFIG_1000KHZ,
+};
+
+/*
+ * Note that the mlxbf_i2c_timings->timeout value is not related to the
+ * bus frequency, it is impacted by the time it takes the driver to
+ * complete data transmission before transaction abort.
+ */
+static const struct mlxbf_i2c_timings mlxbf_i2c_timings[] = {
+ [MLXBF_I2C_TIMING_CONFIG_100KHZ] = {
+ .scl_high = 4810,
+ .scl_low = 5000,
+ .hold_start = 4000,
+ .setup_start = 4800,
+ .setup_stop = 4000,
+ .setup_data = 250,
+ .sda_rise = 50,
+ .sda_fall = 50,
+ .scl_rise = 50,
+ .scl_fall = 50,
+ .hold_data = 300,
+ .buf = 20000,
+ .thigh_max = 5000,
+ .timeout = 106500
+ },
+ [MLXBF_I2C_TIMING_CONFIG_400KHZ] = {
+ .scl_high = 1011,
+ .scl_low = 1300,
+ .hold_start = 600,
+ .setup_start = 700,
+ .setup_stop = 600,
+ .setup_data = 100,
+ .sda_rise = 50,
+ .sda_fall = 50,
+ .scl_rise = 50,
+ .scl_fall = 50,
+ .hold_data = 300,
+ .buf = 20000,
+ .thigh_max = 5000,
+ .timeout = 106500
+ },
+ [MLXBF_I2C_TIMING_CONFIG_1000KHZ] = {
+ .scl_high = 600,
+ .scl_low = 1300,
+ .hold_start = 600,
+ .setup_start = 600,
+ .setup_stop = 600,
+ .setup_data = 100,
+ .sda_rise = 50,
+ .sda_fall = 50,
+ .scl_rise = 50,
+ .scl_fall = 50,
+ .hold_data = 300,
+ .buf = 20000,
+ .thigh_max = 5000,
+ .timeout = 106500
+ }
+};
+
+static int mlxbf_i2c_init_timings(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ enum mlxbf_i2c_timings_config config_idx;
+ struct device *dev = &pdev->dev;
+ u32 config_khz;
+
+ int ret;
+
+ ret = device_property_read_u32(dev, "clock-frequency", &config_khz);
+ if (ret < 0)
+ config_khz = I2C_MAX_STANDARD_MODE_FREQ;
+
+ switch (config_khz) {
+ default:
+ /* Default settings is 100 KHz. */
+ pr_warn("Illegal value %d: defaulting to 100 KHz\n",
+ config_khz);
+ fallthrough;
+ case I2C_MAX_STANDARD_MODE_FREQ:
+ config_idx = MLXBF_I2C_TIMING_CONFIG_100KHZ;
+ break;
+
+ case I2C_MAX_FAST_MODE_FREQ:
+ config_idx = MLXBF_I2C_TIMING_CONFIG_400KHZ;
+ break;
+
+ case I2C_MAX_FAST_MODE_PLUS_FREQ:
+ config_idx = MLXBF_I2C_TIMING_CONFIG_1000KHZ;
+ break;
+ }
+
+ mlxbf_i2c_set_timings(priv, &mlxbf_i2c_timings[config_idx]);
+
+ return 0;
+}
+
+static int mlxbf_i2c_get_gpio(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct mlxbf_i2c_resource *gpio_res;
+ struct device *dev = &pdev->dev;
+ struct resource *params;
+ resource_size_t size;
+
+ gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+ if (!gpio_res)
+ return -EPERM;
+
+ /*
+ * The GPIO region in TYU space is shared among I2C busses.
+ * This function MUST be serialized to avoid racing when
+ * claiming the memory region and/or setting up the GPIO.
+ */
+ lockdep_assert_held(gpio_res->lock);
+
+ /* Check whether the memory map exist. */
+ if (gpio_res->io)
+ return 0;
+
+ params = gpio_res->params;
+ size = resource_size(params);
+
+ if (!devm_request_mem_region(dev, params->start, size, params->name))
+ return -EFAULT;
+
+ gpio_res->io = devm_ioremap(dev, params->start, size);
+ if (!gpio_res->io) {
+ devm_release_mem_region(dev, params->start, size);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int mlxbf_i2c_release_gpio(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct mlxbf_i2c_resource *gpio_res;
+ struct device *dev = &pdev->dev;
+ struct resource *params;
+
+ gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+ if (!gpio_res)
+ return 0;
+
+ mutex_lock(gpio_res->lock);
+
+ if (gpio_res->io) {
+ /* Release the GPIO resource. */
+ params = gpio_res->params;
+ devm_iounmap(dev, gpio_res->io);
+ devm_release_mem_region(dev, params->start,
+ resource_size(params));
+ }
+
+ mutex_unlock(gpio_res->lock);
+
+ return 0;
+}
+
+static int mlxbf_i2c_get_corepll(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct mlxbf_i2c_resource *corepll_res;
+ struct device *dev = &pdev->dev;
+ struct resource *params;
+ resource_size_t size;
+
+ corepll_res = mlxbf_i2c_get_shared_resource(priv,
+ MLXBF_I2C_COREPLL_RES);
+ if (!corepll_res)
+ return -EPERM;
+
+ /*
+ * The COREPLL region in TYU space is shared among I2C busses.
+ * This function MUST be serialized to avoid racing when
+ * claiming the memory region.
+ */
+ lockdep_assert_held(corepll_res->lock);
+
+ /* Check whether the memory map exist. */
+ if (corepll_res->io)
+ return 0;
+
+ params = corepll_res->params;
+ size = resource_size(params);
+
+ if (!devm_request_mem_region(dev, params->start, size, params->name))
+ return -EFAULT;
+
+ corepll_res->io = devm_ioremap(dev, params->start, size);
+ if (!corepll_res->io) {
+ devm_release_mem_region(dev, params->start, size);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int mlxbf_i2c_release_corepll(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct mlxbf_i2c_resource *corepll_res;
+ struct device *dev = &pdev->dev;
+ struct resource *params;
+
+ corepll_res = mlxbf_i2c_get_shared_resource(priv,
+ MLXBF_I2C_COREPLL_RES);
+
+ mutex_lock(corepll_res->lock);
+
+ if (corepll_res->io) {
+ /* Release the CorePLL resource. */
+ params = corepll_res->params;
+ devm_iounmap(dev, corepll_res->io);
+ devm_release_mem_region(dev, params->start,
+ resource_size(params));
+ }
+
+ mutex_unlock(corepll_res->lock);
+
+ return 0;
+}
+
+static int mlxbf_i2c_init_master(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct mlxbf_i2c_resource *gpio_res;
+ struct device *dev = &pdev->dev;
+ u32 config_reg;
+ int ret;
+
+ /* This configuration is only needed for BlueField 1. */
+ if (!mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1))
+ return 0;
+
+ gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+ if (!gpio_res)
+ return -EPERM;
+
+ /*
+ * The GPIO region in TYU space is shared among I2C busses.
+ * This function MUST be serialized to avoid racing when
+ * claiming the memory region and/or setting up the GPIO.
+ */
+
+ mutex_lock(gpio_res->lock);
+
+ ret = mlxbf_i2c_get_gpio(pdev, priv);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get gpio resource");
+ mutex_unlock(gpio_res->lock);
+ return ret;
+ }
+
+ /*
+ * TYU - Configuration for GPIO pins. Those pins must be asserted in
+ * MLXBF_I2C_GPIO_0_FUNC_EN_0, i.e. GPIO 0 is controlled by HW, and must
+ * be reset in MLXBF_I2C_GPIO_0_FORCE_OE_EN, i.e. GPIO_OE will be driven
+ * instead of HW_OE.
+ * For now, we do not reset the GPIO state when the driver is removed.
+ * First, it is not necessary to disable the bus since we are using
+ * the same busses. Then, some busses might be shared among Linux and
+ * platform firmware; disabling the bus might compromise the system
+ * functionality.
+ */
+ config_reg = readl(gpio_res->io + MLXBF_I2C_GPIO_0_FUNC_EN_0);
+ config_reg = MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(priv->bus,
+ config_reg);
+ writel(config_reg, gpio_res->io + MLXBF_I2C_GPIO_0_FUNC_EN_0);
+
+ config_reg = readl(gpio_res->io + MLXBF_I2C_GPIO_0_FORCE_OE_EN);
+ config_reg = MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(priv->bus,
+ config_reg);
+ writel(config_reg, gpio_res->io + MLXBF_I2C_GPIO_0_FORCE_OE_EN);
+
+ mutex_unlock(gpio_res->lock);
+
+ return 0;
+}
+
+static u64 mlxbf_i2c_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res)
+{
+ u64 core_frequency;
+ u8 core_od, core_r;
+ u32 corepll_val;
+ u16 core_f;
+
+ corepll_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1);
+
+ /* Get Core PLL configuration bits. */
+ core_f = FIELD_GET(MLXBF_I2C_COREPLL_CORE_F_TYU_MASK, corepll_val);
+ core_od = FIELD_GET(MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK, corepll_val);
+ core_r = FIELD_GET(MLXBF_I2C_COREPLL_CORE_R_TYU_MASK, corepll_val);
+
+ /*
+ * Compute PLL output frequency as follow:
+ *
+ * CORE_F + 1
+ * PLL_OUT_FREQ = PLL_IN_FREQ * ----------------------------
+ * (CORE_R + 1) * (CORE_OD + 1)
+ *
+ * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency
+ * and PadFrequency, respectively.
+ */
+ core_frequency = MLXBF_I2C_PLL_IN_FREQ * (++core_f);
+ core_frequency /= (++core_r) * (++core_od);
+
+ return core_frequency;
+}
+
+static u64 mlxbf_i2c_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res)
+{
+ u32 corepll_reg1_val, corepll_reg2_val;
+ u64 corepll_frequency;
+ u8 core_od, core_r;
+ u32 core_f;
+
+ corepll_reg1_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1);
+ corepll_reg2_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG2);
+
+ /* Get Core PLL configuration bits */
+ core_f = FIELD_GET(MLXBF_I2C_COREPLL_CORE_F_YU_MASK, corepll_reg1_val);
+ core_r = FIELD_GET(MLXBF_I2C_COREPLL_CORE_R_YU_MASK, corepll_reg1_val);
+ core_od = FIELD_GET(MLXBF_I2C_COREPLL_CORE_OD_YU_MASK, corepll_reg2_val);
+
+ /*
+ * Compute PLL output frequency as follow:
+ *
+ * CORE_F / 16384
+ * PLL_OUT_FREQ = PLL_IN_FREQ * ----------------------------
+ * (CORE_R + 1) * (CORE_OD + 1)
+ *
+ * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency
+ * and PadFrequency, respectively.
+ */
+ corepll_frequency = (MLXBF_I2C_PLL_IN_FREQ * core_f) / MLNXBF_I2C_COREPLL_CONST;
+ corepll_frequency /= (++core_r) * (++core_od);
+
+ return corepll_frequency;
+}
+
+static int mlxbf_i2c_calculate_corepll_freq(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ const struct mlxbf_i2c_chip_info *chip = priv->chip;
+ struct mlxbf_i2c_resource *corepll_res;
+ struct device *dev = &pdev->dev;
+ u64 *freq = &priv->frequency;
+ int ret;
+
+ corepll_res = mlxbf_i2c_get_shared_resource(priv,
+ MLXBF_I2C_COREPLL_RES);
+ if (!corepll_res)
+ return -EPERM;
+
+ /*
+ * First, check whether the TYU core Clock frequency is set.
+ * The TYU core frequency is the same for all I2C busses; when
+ * the first device gets probed the frequency is determined and
+ * stored into a globally visible variable. So, first of all,
+ * check whether the frequency is already set. Here, we assume
+ * that the frequency is expected to be greater than 0.
+ */
+ mutex_lock(corepll_res->lock);
+ if (!mlxbf_i2c_corepll_frequency) {
+ if (!chip->calculate_freq) {
+ mutex_unlock(corepll_res->lock);
+ return -EPERM;
+ }
+
+ ret = mlxbf_i2c_get_corepll(pdev, priv);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get corePLL resource");
+ mutex_unlock(corepll_res->lock);
+ return ret;
+ }
+
+ mlxbf_i2c_corepll_frequency = chip->calculate_freq(corepll_res);
+ }
+ mutex_unlock(corepll_res->lock);
+
+ *freq = mlxbf_i2c_corepll_frequency;
+
+ return 0;
+}
+
+static int mlxbf_i2c_slave_enable(struct mlxbf_i2c_priv *priv,
+ struct i2c_client *slave)
+{
+ u8 reg, reg_cnt, byte, addr_tmp;
+ u32 slave_reg, slave_reg_tmp;
+
+ if (!priv)
+ return -EPERM;
+
+ reg_cnt = MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT >> 2;
+
+ /*
+ * Read the slave registers. There are 4 * 32-bit slave registers.
+ * Each slave register can hold up to 4 * 8-bit slave configuration:
+ * 1) A 7-bit address
+ * 2) And a status bit (1 if enabled, 0 if not).
+ * Look for the next available slave register slot.
+ */
+ for (reg = 0; reg < reg_cnt; reg++) {
+ slave_reg = readl(priv->slv->io +
+ MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
+ /*
+ * Each register holds 4 slave addresses. So, we have to keep
+ * the byte order consistent with the value read in order to
+ * update the register correctly, if needed.
+ */
+ slave_reg_tmp = slave_reg;
+ for (byte = 0; byte < 4; byte++) {
+ addr_tmp = slave_reg_tmp & GENMASK(7, 0);
+
+ /*
+ * If an enable bit is not set in the
+ * MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG register, then the
+ * slave address slot associated with that bit is
+ * free. So set the enable bit and write the
+ * slave address bits.
+ */
+ if (!(addr_tmp & MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT)) {
+ slave_reg &= ~(MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK << (byte * 8));
+ slave_reg |= (slave->addr << (byte * 8));
+ slave_reg |= MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT << (byte * 8);
+ writel(slave_reg, priv->slv->io +
+ MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG +
+ (reg * 0x4));
+
+ /*
+ * Set the slave at the corresponding index.
+ */
+ priv->slave[(reg * 4) + byte] = slave;
+
+ return 0;
+ }
+
+ /* Parse next byte. */
+ slave_reg_tmp >>= 8;
+ }
+ }
+
+ return -EBUSY;
+}
+
+static int mlxbf_i2c_slave_disable(struct mlxbf_i2c_priv *priv, u8 addr)
+{
+ u8 addr_tmp, reg, reg_cnt, byte;
+ u32 slave_reg, slave_reg_tmp;
+
+ reg_cnt = MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT >> 2;
+
+ /*
+ * Read the slave registers. There are 4 * 32-bit slave registers.
+ * Each slave register can hold up to 4 * 8-bit slave configuration:
+ * 1) A 7-bit address
+ * 2) And a status bit (1 if enabled, 0 if not).
+ * Check if addr is present in the registers.
+ */
+ for (reg = 0; reg < reg_cnt; reg++) {
+ slave_reg = readl(priv->slv->io +
+ MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
+
+ /* Check whether the address slots are empty. */
+ if (!slave_reg)
+ continue;
+
+ /*
+ * Check if addr matches any of the 4 slave addresses
+ * in the register.
+ */
+ slave_reg_tmp = slave_reg;
+ for (byte = 0; byte < 4; byte++) {
+ addr_tmp = slave_reg_tmp & MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK;
+ /*
+ * Parse slave address bytes and check whether the
+ * slave address already exists.
+ */
+ if (addr_tmp == addr) {
+ /* Clear the slave address slot. */
+ slave_reg &= ~(GENMASK(7, 0) << (byte * 8));
+ writel(slave_reg, priv->slv->io +
+ MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG +
+ (reg * 0x4));
+ /* Free slave at the corresponding index */
+ priv->slave[(reg * 4) + byte] = NULL;
+
+ return 0;
+ }
+
+ /* Parse next byte. */
+ slave_reg_tmp >>= 8;
+ }
+ }
+
+ return -ENXIO;
+}
+
+static int mlxbf_i2c_init_coalesce(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct mlxbf_i2c_resource *coalesce_res;
+ struct resource *params;
+ resource_size_t size;
+ int ret = 0;
+
+ /*
+ * Unlike BlueField-1 platform, the coalesce registers is a dedicated
+ * resource in the next generations of BlueField.
+ */
+ if (mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1)) {
+ coalesce_res = mlxbf_i2c_get_shared_resource(priv,
+ MLXBF_I2C_COALESCE_RES);
+ if (!coalesce_res)
+ return -EPERM;
+
+ /*
+ * The Cause Coalesce group in TYU space is shared among
+ * I2C busses. This function MUST be serialized to avoid
+ * racing when claiming the memory region.
+ */
+ lockdep_assert_held(mlxbf_i2c_gpio_res->lock);
+
+ /* Check whether the memory map exist. */
+ if (coalesce_res->io) {
+ priv->coalesce = coalesce_res;
+ return 0;
+ }
+
+ params = coalesce_res->params;
+ size = resource_size(params);
+
+ if (!request_mem_region(params->start, size, params->name))
+ return -EFAULT;
+
+ coalesce_res->io = ioremap(params->start, size);
+ if (!coalesce_res->io) {
+ release_mem_region(params->start, size);
+ return -ENOMEM;
+ }
+
+ priv->coalesce = coalesce_res;
+
+ } else {
+ ret = mlxbf_i2c_init_resource(pdev, &priv->coalesce,
+ MLXBF_I2C_COALESCE_RES);
+ }
+
+ return ret;
+}
+
+static int mlxbf_i2c_release_coalesce(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct mlxbf_i2c_resource *coalesce_res;
+ struct device *dev = &pdev->dev;
+ struct resource *params;
+ resource_size_t size;
+
+ coalesce_res = priv->coalesce;
+
+ if (coalesce_res->io) {
+ params = coalesce_res->params;
+ size = resource_size(params);
+ if (mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1)) {
+ mutex_lock(coalesce_res->lock);
+ iounmap(coalesce_res->io);
+ release_mem_region(params->start, size);
+ mutex_unlock(coalesce_res->lock);
+ } else {
+ devm_release_mem_region(dev, params->start, size);
+ }
+ }
+
+ return 0;
+}
+
+static int mlxbf_i2c_init_slave(struct platform_device *pdev,
+ struct mlxbf_i2c_priv *priv)
+{
+ struct device *dev = &pdev->dev;
+ u32 int_reg;
+ int ret;
+
+ /* Reset FSM. */
+ writel(0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_FSM);
+
+ /*
+ * Enable slave cause interrupt bits. Drive
+ * MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE and
+ * MLXBF_I2C_CAUSE_WRITE_SUCCESS, these are enabled when an external
+ * masters issue a Read and Write, respectively. But, clear all
+ * interrupts first.
+ */
+ writel(~0, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR);
+ int_reg = MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE;
+ int_reg |= MLXBF_I2C_CAUSE_WRITE_SUCCESS;
+ writel(int_reg, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_EVTEN0);
+
+ /* Finally, set the 'ready' bit to start handling transactions. */
+ writel(0x1, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_READY);
+
+ /* Initialize the cause coalesce resource. */
+ ret = mlxbf_i2c_init_coalesce(pdev, priv);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize cause coalesce\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static bool mlxbf_i2c_has_coalesce(struct mlxbf_i2c_priv *priv, bool *read,
+ bool *write)
+{
+ const struct mlxbf_i2c_chip_info *chip = priv->chip;
+ u32 coalesce0_reg, cause_reg;
+ u8 slave_shift, is_set;
+
+ *write = false;
+ *read = false;
+
+ slave_shift = chip->type != MLXBF_I2C_CHIP_TYPE_1 ?
+ MLXBF_I2C_CAUSE_YU_SLAVE_BIT :
+ priv->bus + MLXBF_I2C_CAUSE_TYU_SLAVE_BIT;
+
+ coalesce0_reg = readl(priv->coalesce->io + MLXBF_I2C_CAUSE_COALESCE_0);
+ is_set = coalesce0_reg & (1 << slave_shift);
+
+ if (!is_set)
+ return false;
+
+ /* Check the source of the interrupt, i.e. whether a Read or Write. */
+ cause_reg = readl(priv->slv_cause->io + MLXBF_I2C_CAUSE_ARBITER);
+ if (cause_reg & MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE)
+ *read = true;
+ else if (cause_reg & MLXBF_I2C_CAUSE_WRITE_SUCCESS)
+ *write = true;
+
+ /* Clear cause bits. */
+ writel(~0x0, priv->slv_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR);
+
+ return true;
+}
+
+static bool mlxbf_i2c_slave_wait_for_idle(struct mlxbf_i2c_priv *priv,
+ u32 timeout)
+{
+ u32 mask = MLXBF_I2C_CAUSE_S_GW_BUSY_FALL;
+ u32 addr = MLXBF_I2C_CAUSE_ARBITER;
+
+ if (mlxbf_i2c_poll(priv->slv_cause->io, addr, mask, false, timeout))
+ return true;
+
+ return false;
+}
+
+static struct i2c_client *mlxbf_i2c_get_slave_from_addr(
+ struct mlxbf_i2c_priv *priv, u8 addr)
+{
+ int i;
+
+ for (i = 0; i < MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT; i++) {
+ if (!priv->slave[i])
+ continue;
+
+ if (priv->slave[i]->addr == addr)
+ return priv->slave[i];
+ }
+
+ return NULL;
+}
+
+/*
+ * Send byte to 'external' smbus master. This function is executed when
+ * an external smbus master wants to read data from the BlueField.
+ */
+static int mlxbf_i2c_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
+{
+ u8 data_desc[MLXBF_I2C_SLAVE_DATA_DESC_SIZE] = { 0 };
+ u8 write_size, pec_en, addr, value, byte_cnt;
+ struct i2c_client *slave;
+ u32 control32, data32;
+ int ret = 0;
+
+ /*
+ * Read the first byte received from the external master to
+ * determine the slave address. This byte is located in the
+ * first data descriptor register of the slave GW.
+ */
+ data32 = ioread32be(priv->slv->io +
+ MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+ addr = (data32 & GENMASK(7, 0)) >> 1;
+
+ /*
+ * Check if the slave address received in the data descriptor register
+ * matches any of the slave addresses registered. If there is a match,
+ * set the slave.
+ */
+ slave = mlxbf_i2c_get_slave_from_addr(priv, addr);
+ if (!slave) {
+ ret = -ENXIO;
+ goto clear_csr;
+ }
+
+ /*
+ * An I2C read can consist of a WRITE bit transaction followed by
+ * a READ bit transaction. Indeed, slave devices often expect
+ * the slave address to be followed by the internal address.
+ * So, write the internal address byte first, and then, send the
+ * requested data to the master.
+ */
+ if (recv_bytes > 1) {
+ i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+ value = (data32 >> 8) & GENMASK(7, 0);
+ ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
+ &value);
+ i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+ if (ret < 0)
+ goto clear_csr;
+ }
+
+ /*
+ * Send data to the master. Currently, the driver supports
+ * READ_BYTE, READ_WORD and BLOCK READ protocols. The
+ * hardware can send up to 128 bytes per transfer which is
+ * the total size of the data registers.
+ */
+ i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+
+ for (byte_cnt = 0; byte_cnt < MLXBF_I2C_SLAVE_DATA_DESC_SIZE; byte_cnt++) {
+ data_desc[byte_cnt] = value;
+ i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+ }
+
+ /* Send a stop condition to the backend. */
+ i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+ /* Set the number of bytes to write to master. */
+ write_size = (byte_cnt - 1) & 0x7f;
+
+ /* Write data to Slave GW data descriptor. */
+ mlxbf_i2c_smbus_write_data(priv, data_desc, byte_cnt,
+ MLXBF_I2C_SLAVE_DATA_DESC_ADDR, false);
+
+ pec_en = 0; /* Disable PEC since it is not supported. */
+
+ /* Prepare control word. */
+ control32 = MLXBF_I2C_SLAVE_ENABLE;
+ control32 |= rol32(write_size, MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT);
+ control32 |= rol32(pec_en, MLXBF_I2C_SLAVE_SEND_PEC_SHIFT);
+
+ writel(control32, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_GW);
+
+ /*
+ * Wait until the transfer is completed; the driver will wait
+ * until the GW is idle, a cause will rise on fall of GW busy.
+ */
+ mlxbf_i2c_slave_wait_for_idle(priv, MLXBF_I2C_SMBUS_TIMEOUT);
+
+clear_csr:
+ /* Release the Slave GW. */
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
+ writel(0x1, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_READY);
+
+ return ret;
+}
+
+/*
+ * Receive bytes from 'external' smbus master. This function is executed when
+ * an external smbus master wants to write data to the BlueField.
+ */
+static int mlxbf_i2c_irq_recv(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
+{
+ u8 data_desc[MLXBF_I2C_SLAVE_DATA_DESC_SIZE] = { 0 };
+ struct i2c_client *slave;
+ u8 value, byte, addr;
+ int ret = 0;
+
+ /* Read data from Slave GW data descriptor. */
+ mlxbf_i2c_smbus_read_data(priv, data_desc, recv_bytes,
+ MLXBF_I2C_SLAVE_DATA_DESC_ADDR, false);
+ addr = data_desc[0] >> 1;
+
+ /*
+ * Check if the slave address received in the data descriptor register
+ * matches any of the slave addresses registered.
+ */
+ slave = mlxbf_i2c_get_slave_from_addr(priv, addr);
+ if (!slave) {
+ ret = -EINVAL;
+ goto clear_csr;
+ }
+
+ /*
+ * Notify the slave backend that an smbus master wants to write data
+ * to the BlueField.
+ */
+ i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+ /* Send the received data to the slave backend. */
+ for (byte = 1; byte < recv_bytes; byte++) {
+ value = data_desc[byte];
+ ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
+ &value);
+ if (ret < 0)
+ break;
+ }
+
+ /*
+ * Send a stop event to the slave backend, to signal
+ * the end of the write transactions.
+ */
+ i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+clear_csr:
+ /* Release the Slave GW. */
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ writel(0x0, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_PEC);
+ writel(0x1, priv->slv->io + MLXBF_I2C_SMBUS_SLAVE_READY);
+
+ return ret;
+}
+
+static irqreturn_t mlxbf_i2c_irq(int irq, void *ptr)
+{
+ struct mlxbf_i2c_priv *priv = ptr;
+ bool read, write, irq_is_set;
+ u32 rw_bytes_reg;
+ u8 recv_bytes;
+
+ /*
+ * Read TYU interrupt register and determine the source of the
+ * interrupt. Based on the source of the interrupt one of the
+ * following actions are performed:
+ * - Receive data and send response to master.
+ * - Send data and release slave GW.
+ *
+ * Handle read/write transaction only. CRmaster and Iarp requests
+ * are ignored for now.
+ */
+ irq_is_set = mlxbf_i2c_has_coalesce(priv, &read, &write);
+ if (!irq_is_set || (!read && !write)) {
+ /* Nothing to do here, interrupt was not from this device. */
+ return IRQ_NONE;
+ }
+
+ /*
+ * The MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES includes the number of
+ * bytes from/to master. These are defined by 8-bits each. If the lower
+ * 8 bits are set, then the master expect to read N bytes from the
+ * slave, if the higher 8 bits are sent then the slave expect N bytes
+ * from the master.
+ */
+ rw_bytes_reg = readl(priv->slv->io +
+ MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+ recv_bytes = (rw_bytes_reg >> 8) & GENMASK(7, 0);
+
+ /*
+ * For now, the slave supports 128 bytes transfer. Discard remaining
+ * data bytes if the master wrote more than
+ * MLXBF_I2C_SLAVE_DATA_DESC_SIZE, i.e, the actual size of the slave
+ * data descriptor.
+ *
+ * Note that we will never expect to transfer more than 128 bytes; as
+ * specified in the SMBus standard, block transactions cannot exceed
+ * 32 bytes.
+ */
+ recv_bytes = recv_bytes > MLXBF_I2C_SLAVE_DATA_DESC_SIZE ?
+ MLXBF_I2C_SLAVE_DATA_DESC_SIZE : recv_bytes;
+
+ if (read)
+ mlxbf_i2c_irq_send(priv, recv_bytes);
+ else
+ mlxbf_i2c_irq_recv(priv, recv_bytes);
+
+ return IRQ_HANDLED;
+}
+
+/* Return negative errno on error. */
+static s32 mlxbf_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ struct mlxbf_i2c_smbus_request request = { 0 };
+ struct mlxbf_i2c_priv *priv;
+ bool read, pec;
+ u8 byte_cnt;
+
+ request.slave = addr;
+
+ read = (read_write == I2C_SMBUS_READ);
+ pec = flags & I2C_FUNC_SMBUS_PEC;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ mlxbf_i2c_smbus_quick_command(&request, read);
+ dev_dbg(&adap->dev, "smbus quick, slave 0x%02x\n", addr);
+ break;
+
+ case I2C_SMBUS_BYTE:
+ mlxbf_i2c_smbus_byte_func(&request,
+ read ? &data->byte : &command, read,
+ pec);
+ dev_dbg(&adap->dev, "smbus %s byte, slave 0x%02x.\n",
+ read ? "read" : "write", addr);
+ break;
+
+ case I2C_SMBUS_BYTE_DATA:
+ mlxbf_i2c_smbus_data_byte_func(&request, &command, &data->byte,
+ read, pec);
+ dev_dbg(&adap->dev, "smbus %s byte data at 0x%02x, slave 0x%02x.\n",
+ read ? "read" : "write", command, addr);
+ break;
+
+ case I2C_SMBUS_WORD_DATA:
+ mlxbf_i2c_smbus_data_word_func(&request, &command,
+ (u8 *)&data->word, read, pec);
+ dev_dbg(&adap->dev, "smbus %s word data at 0x%02x, slave 0x%02x.\n",
+ read ? "read" : "write", command, addr);
+ break;
+
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ byte_cnt = data->block[0];
+ mlxbf_i2c_smbus_i2c_block_func(&request, &command, data->block,
+ &byte_cnt, read, pec);
+ dev_dbg(&adap->dev, "i2c %s block data, %d bytes at 0x%02x, slave 0x%02x.\n",
+ read ? "read" : "write", byte_cnt, command, addr);
+ break;
+
+ case I2C_SMBUS_BLOCK_DATA:
+ byte_cnt = read ? I2C_SMBUS_BLOCK_MAX : data->block[0];
+ mlxbf_i2c_smbus_block_func(&request, &command, data->block,
+ &byte_cnt, read, pec);
+ dev_dbg(&adap->dev, "smbus %s block data, %d bytes at 0x%02x, slave 0x%02x.\n",
+ read ? "read" : "write", byte_cnt, command, addr);
+ break;
+
+ case I2C_FUNC_SMBUS_PROC_CALL:
+ mlxbf_i2c_smbus_process_call_func(&request, &command,
+ (u8 *)&data->word, pec);
+ dev_dbg(&adap->dev, "process call, wr/rd at 0x%02x, slave 0x%02x.\n",
+ command, addr);
+ break;
+
+ case I2C_FUNC_SMBUS_BLOCK_PROC_CALL:
+ byte_cnt = data->block[0];
+ mlxbf_i2c_smbus_blk_process_call_func(&request, &command,
+ data->block, &byte_cnt,
+ pec);
+ dev_dbg(&adap->dev, "block process call, wr/rd %d bytes, slave 0x%02x.\n",
+ byte_cnt, addr);
+ break;
+
+ default:
+ dev_dbg(&adap->dev, "Unsupported I2C/SMBus command %d\n",
+ size);
+ return -EOPNOTSUPP;
+ }
+
+ priv = i2c_get_adapdata(adap);
+
+ return mlxbf_i2c_smbus_start_transaction(priv, &request);
+}
+
+static int mlxbf_i2c_reg_slave(struct i2c_client *slave)
+{
+ struct mlxbf_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+ struct device *dev = &slave->dev;
+ int ret;
+
+ /*
+ * Do not support ten bit chip address and do not use Packet Error
+ * Checking (PEC).
+ */
+ if (slave->flags & (I2C_CLIENT_TEN | I2C_CLIENT_PEC)) {
+ dev_err(dev, "SMBus PEC and 10 bit address not supported\n");
+ return -EAFNOSUPPORT;
+ }
+
+ ret = mlxbf_i2c_slave_enable(priv, slave);
+ if (ret)
+ dev_err(dev, "Surpassed max number of registered slaves allowed\n");
+
+ return 0;
+}
+
+static int mlxbf_i2c_unreg_slave(struct i2c_client *slave)
+{
+ struct mlxbf_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+ struct device *dev = &slave->dev;
+ int ret;
+
+ /*
+ * Unregister slave by:
+ * 1) Disabling the slave address in hardware
+ * 2) Freeing priv->slave at the corresponding index
+ */
+ ret = mlxbf_i2c_slave_disable(priv, slave->addr);
+ if (ret)
+ dev_err(dev, "Unable to find slave 0x%x\n", slave->addr);
+
+ return ret;
+}
+
+static u32 mlxbf_i2c_functionality(struct i2c_adapter *adap)
+{
+ return MLXBF_I2C_FUNC_ALL;
+}
+
+static struct mlxbf_i2c_chip_info mlxbf_i2c_chip[] = {
+ [MLXBF_I2C_CHIP_TYPE_1] = {
+ .type = MLXBF_I2C_CHIP_TYPE_1,
+ .shared_res = {
+ [0] = &mlxbf_i2c_coalesce_res[MLXBF_I2C_CHIP_TYPE_1],
+ [1] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_1],
+ [2] = &mlxbf_i2c_gpio_res[MLXBF_I2C_CHIP_TYPE_1]
+ },
+ .calculate_freq = mlxbf_i2c_calculate_freq_from_tyu,
+ .smbus_master_rs_bytes_off = MLXBF_I2C_YU_SMBUS_RS_BYTES,
+ .smbus_master_fsm_off = MLXBF_I2C_YU_SMBUS_MASTER_FSM
+ },
+ [MLXBF_I2C_CHIP_TYPE_2] = {
+ .type = MLXBF_I2C_CHIP_TYPE_2,
+ .shared_res = {
+ [0] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_2]
+ },
+ .calculate_freq = mlxbf_i2c_calculate_freq_from_yu,
+ .smbus_master_rs_bytes_off = MLXBF_I2C_YU_SMBUS_RS_BYTES,
+ .smbus_master_fsm_off = MLXBF_I2C_YU_SMBUS_MASTER_FSM
+ },
+ [MLXBF_I2C_CHIP_TYPE_3] = {
+ .type = MLXBF_I2C_CHIP_TYPE_3,
+ .shared_res = {
+ [0] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_3]
+ },
+ .calculate_freq = mlxbf_i2c_calculate_freq_from_yu,
+ .smbus_master_rs_bytes_off = MLXBF_I2C_RSH_YU_SMBUS_RS_BYTES,
+ .smbus_master_fsm_off = MLXBF_I2C_RSH_YU_SMBUS_MASTER_FSM
+ }
+};
+
+static const struct i2c_algorithm mlxbf_i2c_algo = {
+ .smbus_xfer = mlxbf_i2c_smbus_xfer,
+ .functionality = mlxbf_i2c_functionality,
+ .reg_slave = mlxbf_i2c_reg_slave,
+ .unreg_slave = mlxbf_i2c_unreg_slave,
+};
+
+static struct i2c_adapter_quirks mlxbf_i2c_quirks = {
+ .max_read_len = MLXBF_I2C_MASTER_DATA_R_LENGTH,
+ .max_write_len = MLXBF_I2C_MASTER_DATA_W_LENGTH,
+};
+
+static const struct acpi_device_id mlxbf_i2c_acpi_ids[] = {
+ { "MLNXBF03", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1] },
+ { "MLNXBF23", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2] },
+ { "MLNXBF31", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_3] },
+ {},
+};
+
+MODULE_DEVICE_TABLE(acpi, mlxbf_i2c_acpi_ids);
+
+static int mlxbf_i2c_acpi_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
+{
+ const struct acpi_device_id *aid;
+ u64 bus_id;
+ int ret;
+
+ if (acpi_disabled)
+ return -ENOENT;
+
+ aid = acpi_match_device(mlxbf_i2c_acpi_ids, dev);
+ if (!aid)
+ return -ENODEV;
+
+ priv->chip = (struct mlxbf_i2c_chip_info *)aid->driver_data;
+
+ ret = acpi_dev_uid_to_integer(ACPI_COMPANION(dev), &bus_id);
+ if (ret) {
+ dev_err(dev, "Cannot retrieve UID\n");
+ return ret;
+ }
+
+ priv->bus = bus_id;
+
+ return 0;
+}
+
+static int mlxbf_i2c_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mlxbf_i2c_priv *priv;
+ struct i2c_adapter *adap;
+ u32 resource_version;
+ int irq, ret;
+
+ priv = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = mlxbf_i2c_acpi_probe(dev, priv);
+ if (ret < 0)
+ return ret;
+
+ /* This property allows the driver to stay backward compatible with older
+ * ACPI tables.
+ * Starting BlueField-3 SoC, the "smbus" resource was broken down into 3
+ * separate resources "timer", "master" and "slave".
+ */
+ if (device_property_read_u32(dev, "resource_version", &resource_version))
+ resource_version = 0;
+
+ priv->resource_version = resource_version;
+
+ if (priv->chip->type < MLXBF_I2C_CHIP_TYPE_3 && resource_version == 0) {
+ priv->timer = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_resource), GFP_KERNEL);
+ if (!priv->timer)
+ return -ENOMEM;
+
+ priv->mst = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_resource), GFP_KERNEL);
+ if (!priv->mst)
+ return -ENOMEM;
+
+ priv->slv = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_resource), GFP_KERNEL);
+ if (!priv->slv)
+ return -ENOMEM;
+
+ ret = mlxbf_i2c_init_resource(pdev, &priv->smbus,
+ MLXBF_I2C_SMBUS_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch smbus resource info");
+ return ret;
+ }
+
+ priv->timer->io = priv->smbus->io;
+ priv->mst->io = priv->smbus->io + MLXBF_I2C_MST_ADDR_OFFSET;
+ priv->slv->io = priv->smbus->io + MLXBF_I2C_SLV_ADDR_OFFSET;
+ } else {
+ ret = mlxbf_i2c_init_resource(pdev, &priv->timer,
+ MLXBF_I2C_SMBUS_TIMER_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch timer resource info");
+ return ret;
+ }
+
+ ret = mlxbf_i2c_init_resource(pdev, &priv->mst,
+ MLXBF_I2C_SMBUS_MST_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch master resource info");
+ return ret;
+ }
+
+ ret = mlxbf_i2c_init_resource(pdev, &priv->slv,
+ MLXBF_I2C_SMBUS_SLV_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch slave resource info");
+ return ret;
+ }
+ }
+
+ ret = mlxbf_i2c_init_resource(pdev, &priv->mst_cause,
+ MLXBF_I2C_MST_CAUSE_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch cause master resource info");
+ return ret;
+ }
+
+ ret = mlxbf_i2c_init_resource(pdev, &priv->slv_cause,
+ MLXBF_I2C_SLV_CAUSE_RES);
+ if (ret < 0) {
+ dev_err(dev, "Cannot fetch cause slave resource info");
+ return ret;
+ }
+
+ adap = &priv->adap;
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_HWMON;
+ adap->algo = &mlxbf_i2c_algo;
+ adap->quirks = &mlxbf_i2c_quirks;
+ adap->dev.parent = dev;
+ adap->dev.of_node = dev->of_node;
+ adap->nr = priv->bus;
+
+ snprintf(adap->name, sizeof(adap->name), "i2c%d", adap->nr);
+ i2c_set_adapdata(adap, priv);
+
+ /* Read Core PLL frequency. */
+ ret = mlxbf_i2c_calculate_corepll_freq(pdev, priv);
+ if (ret < 0) {
+ dev_err(dev, "cannot get core clock frequency\n");
+ /* Set to default value. */
+ priv->frequency = MLXBF_I2C_COREPLL_FREQ;
+ }
+
+ /*
+ * Initialize master.
+ * Note that a physical bus might be shared among Linux and firmware
+ * (e.g., ATF). Thus, the bus should be initialized and ready and
+ * bus initialization would be unnecessary. This requires additional
+ * knowledge about physical busses. But, since an extra initialization
+ * does not really hurt, then keep the code as is.
+ */
+ ret = mlxbf_i2c_init_master(pdev, priv);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize smbus master %d",
+ priv->bus);
+ return ret;
+ }
+
+ mlxbf_i2c_init_timings(pdev, priv);
+
+ mlxbf_i2c_init_slave(pdev, priv);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ ret = devm_request_irq(dev, irq, mlxbf_i2c_irq,
+ IRQF_SHARED | IRQF_PROBE_SHARED,
+ dev_name(dev), priv);
+ if (ret < 0) {
+ dev_err(dev, "Cannot get irq %d\n", irq);
+ return ret;
+ }
+
+ priv->irq = irq;
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = i2c_add_numbered_adapter(adap);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&mlxbf_i2c_bus_lock);
+ mlxbf_i2c_bus_count++;
+ mutex_unlock(&mlxbf_i2c_bus_lock);
+
+ return 0;
+}
+
+static int mlxbf_i2c_remove(struct platform_device *pdev)
+{
+ struct mlxbf_i2c_priv *priv = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ struct resource *params;
+
+ if (priv->chip->type < MLXBF_I2C_CHIP_TYPE_3 && priv->resource_version == 0) {
+ params = priv->smbus->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+ } else {
+ params = priv->timer->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+
+ params = priv->mst->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+
+ params = priv->slv->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+ }
+
+ params = priv->mst_cause->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+
+ params = priv->slv_cause->params;
+ devm_release_mem_region(dev, params->start, resource_size(params));
+
+ /*
+ * Release shared resources. This should be done when releasing
+ * the I2C controller.
+ */
+ mutex_lock(&mlxbf_i2c_bus_lock);
+ if (--mlxbf_i2c_bus_count == 0) {
+ mlxbf_i2c_release_coalesce(pdev, priv);
+ mlxbf_i2c_release_corepll(pdev, priv);
+ mlxbf_i2c_release_gpio(pdev, priv);
+ }
+ mutex_unlock(&mlxbf_i2c_bus_lock);
+
+ devm_free_irq(dev, priv->irq, priv);
+
+ i2c_del_adapter(&priv->adap);
+
+ return 0;
+}
+
+static struct platform_driver mlxbf_i2c_driver = {
+ .probe = mlxbf_i2c_probe,
+ .remove = mlxbf_i2c_remove,
+ .driver = {
+ .name = "i2c-mlxbf",
+ .acpi_match_table = ACPI_PTR(mlxbf_i2c_acpi_ids),
+ },
+};
+
+static int __init mlxbf_i2c_init(void)
+{
+ mutex_init(&mlxbf_i2c_coalesce_lock);
+ mutex_init(&mlxbf_i2c_corepll_lock);
+ mutex_init(&mlxbf_i2c_gpio_lock);
+
+ mutex_init(&mlxbf_i2c_bus_lock);
+
+ return platform_driver_register(&mlxbf_i2c_driver);
+}
+module_init(mlxbf_i2c_init);
+
+static void __exit mlxbf_i2c_exit(void)
+{
+ platform_driver_unregister(&mlxbf_i2c_driver);
+
+ mutex_destroy(&mlxbf_i2c_bus_lock);
+
+ mutex_destroy(&mlxbf_i2c_gpio_lock);
+ mutex_destroy(&mlxbf_i2c_corepll_lock);
+ mutex_destroy(&mlxbf_i2c_coalesce_lock);
+}
+module_exit(mlxbf_i2c_exit);
+
+MODULE_DESCRIPTION("Mellanox BlueField I2C bus driver");
+MODULE_AUTHOR("Khalil Blaiech <kblaiech@nvidia.com>");
+MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>");
+MODULE_LICENSE("GPL v2");