diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/i2c/busses/i2c-pca-isa.c | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c new file mode 100644 index 000000000..85e8cf58e --- /dev/null +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * i2c-pca-isa.c driver for PCA9564 on ISA boards + * Copyright (C) 2004 Arcom Control Systems + * Copyright (C) 2008 Pengutronix + */ + +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/wait.h> +#include <linux/isa.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-pca.h> +#include <linux/io.h> + +#include <asm/irq.h> + +#define DRIVER "i2c-pca-isa" +#define IO_SIZE 4 + +static unsigned long base; +static int irq = -1; + +/* Data sheet recommends 59kHz for 100kHz operation due to variation + * in the actual clock rate */ +static int clock = 59000; + +static struct i2c_adapter pca_isa_ops; +static wait_queue_head_t pca_wait; + +static void pca_isa_writebyte(void *pd, int reg, int val) +{ +#ifdef DEBUG_IO + static char *names[] = { "T/O", "DAT", "ADR", "CON" }; + printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg], + base+reg, val); +#endif + outb(val, base+reg); +} + +static int pca_isa_readbyte(void *pd, int reg) +{ + int res = inb(base+reg); +#ifdef DEBUG_IO + { + static char *names[] = { "STA", "DAT", "ADR", "CON" }; + printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res); + } +#endif + return res; +} + +static int pca_isa_waitforcompletion(void *pd) +{ + unsigned long timeout; + long ret; + + if (irq > -1) { + ret = wait_event_timeout(pca_wait, + pca_isa_readbyte(pd, I2C_PCA_CON) + & I2C_PCA_CON_SI, pca_isa_ops.timeout); + } else { + /* Do polling */ + timeout = jiffies + pca_isa_ops.timeout; + do { + ret = time_before(jiffies, timeout); + if (pca_isa_readbyte(pd, I2C_PCA_CON) + & I2C_PCA_CON_SI) + break; + udelay(100); + } while (ret); + } + + return ret > 0; +} + +static void pca_isa_resetchip(void *pd) +{ + /* apparently only an external reset will do it. not a lot can be done */ + printk(KERN_WARNING DRIVER ": Haven't figured out how to do a reset yet\n"); +} + +static irqreturn_t pca_handler(int this_irq, void *dev_id) { + wake_up(&pca_wait); + return IRQ_HANDLED; +} + +static struct i2c_algo_pca_data pca_isa_data = { + /* .data intentionally left NULL, not needed with ISA */ + .write_byte = pca_isa_writebyte, + .read_byte = pca_isa_readbyte, + .wait_for_completion = pca_isa_waitforcompletion, + .reset_chip = pca_isa_resetchip, +}; + +static struct i2c_adapter pca_isa_ops = { + .owner = THIS_MODULE, + .algo_data = &pca_isa_data, + .name = "PCA9564/PCA9665 ISA Adapter", + .timeout = HZ, +}; + +static int pca_isa_match(struct device *dev, unsigned int id) +{ + int match = base != 0; + + if (match) { + if (irq <= -1) + dev_warn(dev, "Using polling mode (specify irq)\n"); + } else + dev_err(dev, "Please specify I/O base\n"); + + return match; +} + +static int pca_isa_probe(struct device *dev, unsigned int id) +{ + init_waitqueue_head(&pca_wait); + + dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq); + +#ifdef CONFIG_PPC + if (check_legacy_ioport(base)) { + dev_err(dev, "I/O address %#08lx is not available\n", base); + goto out; + } +#endif + + if (!request_region(base, IO_SIZE, "i2c-pca-isa")) { + dev_err(dev, "I/O address %#08lx is in use\n", base); + goto out; + } + + if (irq > -1) { + if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) { + dev_err(dev, "Request irq%d failed\n", irq); + goto out_region; + } + } + + pca_isa_data.i2c_clock = clock; + if (i2c_pca_add_bus(&pca_isa_ops) < 0) { + dev_err(dev, "Failed to add i2c bus\n"); + goto out_irq; + } + + return 0; + + out_irq: + if (irq > -1) + free_irq(irq, &pca_isa_ops); + out_region: + release_region(base, IO_SIZE); + out: + return -ENODEV; +} + +static void pca_isa_remove(struct device *dev, unsigned int id) +{ + i2c_del_adapter(&pca_isa_ops); + + if (irq > -1) { + disable_irq(irq); + free_irq(irq, &pca_isa_ops); + } + release_region(base, IO_SIZE); +} + +static struct isa_driver pca_isa_driver = { + .match = pca_isa_match, + .probe = pca_isa_probe, + .remove = pca_isa_remove, + .driver = { + .owner = THIS_MODULE, + .name = DRIVER, + } +}; + +MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); +MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver"); +MODULE_LICENSE("GPL"); + +module_param_hw(base, ulong, ioport, 0); +MODULE_PARM_DESC(base, "I/O base address"); +module_param_hw(irq, int, irq, 0); +MODULE_PARM_DESC(irq, "IRQ"); +module_param(clock, int, 0); +MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t" + "For PCA9564: 330000,288000,217000,146000," + "88000,59000,44000,36000\n" + "\t\tFor PCA9665:\tStandard: 60300 - 100099\n" + "\t\t\t\tFast: 100100 - 400099\n" + "\t\t\t\tFast+: 400100 - 10000099\n" + "\t\t\t\tTurbo: Up to 1265800"); +module_isa_driver(pca_isa_driver, 1); |