diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/i2c/busses/i2c-pxa.c | 1612 |
1 files changed, 1612 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c new file mode 100644 index 000000000..ade3f0ea5 --- /dev/null +++ b/drivers/i2c/busses/i2c-pxa.c @@ -0,0 +1,1612 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * i2c_adap_pxa.c + * + * I2C adapter for the PXA I2C bus access. + * + * Copyright (C) 2002 Intrinsyc Software Inc. + * Copyright (C) 2004-2005 Deep Blue Solutions Ltd. + * + * History: + * Apr 2002: Initial version [CS] + * Jun 2002: Properly separated algo/adap [FB] + * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] + * Jan 2003: added limited signal handling [Kai-Uwe Bloem] + * Sep 2004: Major rework to ensure efficient bus handling [RMK] + * Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood] + * Feb 2005: Rework slave mode handling [RMK] + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/platform_data/i2c-pxa.h> +#include <linux/slab.h> + +/* I2C register field definitions */ +#define IBMR_SDAS (1 << 0) +#define IBMR_SCLS (1 << 1) + +#define ICR_START (1 << 0) /* start bit */ +#define ICR_STOP (1 << 1) /* stop bit */ +#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +#define ICR_TB (1 << 3) /* transfer byte bit */ +#define ICR_MA (1 << 4) /* master abort */ +#define ICR_SCLE (1 << 5) /* master clock enable */ +#define ICR_IUE (1 << 6) /* unit enable */ +#define ICR_GCD (1 << 7) /* general call disable */ +#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ +#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ +#define ICR_BEIE (1 << 10) /* enable bus error ints */ +#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ +#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ +#define ICR_SADIE (1 << 13) /* slave address detected int enable */ +#define ICR_UR (1 << 14) /* unit reset */ +#define ICR_FM (1 << 15) /* fast mode */ +#define ICR_HS (1 << 16) /* High Speed mode */ +#define ICR_A3700_FM (1 << 16) /* fast mode for armada-3700 */ +#define ICR_A3700_HS (1 << 17) /* high speed mode for armada-3700 */ +#define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */ + +#define ISR_RWM (1 << 0) /* read/write mode */ +#define ISR_ACKNAK (1 << 1) /* ack/nak status */ +#define ISR_UB (1 << 2) /* unit busy */ +#define ISR_IBB (1 << 3) /* bus busy */ +#define ISR_SSD (1 << 4) /* slave stop detected */ +#define ISR_ALD (1 << 5) /* arbitration loss detected */ +#define ISR_ITE (1 << 6) /* tx buffer empty */ +#define ISR_IRF (1 << 7) /* rx buffer full */ +#define ISR_GCAD (1 << 8) /* general call address detected */ +#define ISR_SAD (1 << 9) /* slave address detected */ +#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ + +#define ILCR_SLV_SHIFT 0 +#define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT) +#define ILCR_FLV_SHIFT 9 +#define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT) +#define ILCR_HLVL_SHIFT 18 +#define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT) +#define ILCR_HLVH_SHIFT 27 +#define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT) + +#define IWCR_CNT_SHIFT 0 +#define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT) +#define IWCR_HS_CNT1_SHIFT 5 +#define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT) +#define IWCR_HS_CNT2_SHIFT 10 +#define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) + +/* need a longer timeout if we're dealing with the fact we may well be + * looking at a multi-master environment + */ +#define DEF_TIMEOUT 32 + +#define NO_SLAVE (-ENXIO) +#define BUS_ERROR (-EREMOTEIO) +#define XFER_NAKED (-ECONNREFUSED) +#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ + +/* ICR initialize bit values + * + * 15 FM 0 (100 kHz operation) + * 14 UR 0 (No unit reset) + * 13 SADIE 0 (Disables the unit from interrupting on slave addresses + * matching its slave address) + * 12 ALDIE 0 (Disables the unit from interrupt when it loses arbitration + * in master mode) + * 11 SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) + * 10 BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) + * 9 IRFIE 1 (Enable interrupts from full buffer received) + * 8 ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) + * 7 GCD 1 (Disables i2c unit response to general call messages as a slave) + * 6 IUE 0 (Disable unit until we change settings) + * 5 SCLE 1 (Enables the i2c clock output for master mode (drives SCL) + * 4 MA 0 (Only send stop with the ICR stop bit) + * 3 TB 0 (We are not transmitting a byte initially) + * 2 ACKNAK 0 (Send an ACK after the unit receives a byte) + * 1 STOP 0 (Do not send a STOP) + * 0 START 0 (Do not send a START) + */ +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) + +/* I2C status register init values + * + * 10 BED 1 (Clear bus error detected) + * 9 SAD 1 (Clear slave address detected) + * 7 IRF 1 (Clear IDBR Receive Full) + * 6 ITE 1 (Clear IDBR Transmit Empty) + * 5 ALD 1 (Clear Arbitration Loss Detected) + * 4 SSD 1 (Clear Slave Stop Detected) + */ +#define I2C_ISR_INIT 0x7FF /* status register init */ + +struct pxa_reg_layout { + u32 ibmr; + u32 idbr; + u32 icr; + u32 isr; + u32 isar; + u32 ilcr; + u32 iwcr; + u32 fm; + u32 hs; +}; + +enum pxa_i2c_types { + REGS_PXA2XX, + REGS_PXA3XX, + REGS_CE4100, + REGS_PXA910, + REGS_A3700, +}; + +/* I2C register layout definitions */ +static struct pxa_reg_layout pxa_reg_layout[] = { + [REGS_PXA2XX] = { + .ibmr = 0x00, + .idbr = 0x08, + .icr = 0x10, + .isr = 0x18, + .isar = 0x20, + .fm = ICR_FM, + .hs = ICR_HS, + }, + [REGS_PXA3XX] = { + .ibmr = 0x00, + .idbr = 0x04, + .icr = 0x08, + .isr = 0x0c, + .isar = 0x10, + .fm = ICR_FM, + .hs = ICR_HS, + }, + [REGS_CE4100] = { + .ibmr = 0x14, + .idbr = 0x0c, + .icr = 0x00, + .isr = 0x04, + /* no isar register */ + .fm = ICR_FM, + .hs = ICR_HS, + }, + [REGS_PXA910] = { + .ibmr = 0x00, + .idbr = 0x08, + .icr = 0x10, + .isr = 0x18, + .isar = 0x20, + .ilcr = 0x28, + .iwcr = 0x30, + .fm = ICR_FM, + .hs = ICR_HS, + }, + [REGS_A3700] = { + .ibmr = 0x00, + .idbr = 0x04, + .icr = 0x08, + .isr = 0x0c, + .isar = 0x10, + .fm = ICR_A3700_FM, + .hs = ICR_A3700_HS, + }, +}; + +static const struct of_device_id i2c_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, + { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, + { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 }, + { .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 }, + {} +}; +MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); + +static const struct platform_device_id i2c_pxa_id_table[] = { + { "pxa2xx-i2c", REGS_PXA2XX }, + { "pxa3xx-pwri2c", REGS_PXA3XX }, + { "ce4100-i2c", REGS_CE4100 }, + { "pxa910-i2c", REGS_PXA910 }, + { "armada-3700-i2c", REGS_A3700 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); + +struct pxa_i2c { + spinlock_t lock; + wait_queue_head_t wait; + struct i2c_msg *msg; + unsigned int msg_num; + unsigned int msg_idx; + unsigned int msg_ptr; + unsigned int slave_addr; + unsigned int req_slave_addr; + + struct i2c_adapter adap; + struct clk *clk; +#ifdef CONFIG_I2C_PXA_SLAVE + struct i2c_client *slave; +#endif + + unsigned int irqlogidx; + u32 isrlog[32]; + u32 icrlog[32]; + + void __iomem *reg_base; + void __iomem *reg_ibmr; + void __iomem *reg_idbr; + void __iomem *reg_icr; + void __iomem *reg_isr; + void __iomem *reg_isar; + void __iomem *reg_ilcr; + void __iomem *reg_iwcr; + + unsigned long iobase; + unsigned long iosize; + + int irq; + unsigned int use_pio :1; + unsigned int fast_mode :1; + unsigned int high_mode:1; + unsigned char master_code; + unsigned long rate; + bool highmode_enter; + u32 fm_mask; + u32 hs_mask; + + struct i2c_bus_recovery_info recovery; + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_default; + struct pinctrl_state *pinctrl_recovery; +}; + +#define _IBMR(i2c) ((i2c)->reg_ibmr) +#define _IDBR(i2c) ((i2c)->reg_idbr) +#define _ICR(i2c) ((i2c)->reg_icr) +#define _ISR(i2c) ((i2c)->reg_isr) +#define _ISAR(i2c) ((i2c)->reg_isar) +#define _ILCR(i2c) ((i2c)->reg_ilcr) +#define _IWCR(i2c) ((i2c)->reg_iwcr) + +/* + * I2C Slave mode address + */ +#define I2C_PXA_SLAVE_ADDR 0x1 + +#ifdef DEBUG + +struct bits { + u32 mask; + const char *set; + const char *unset; +}; +#define PXA_BIT(m, s, u) { .mask = m, .set = s, .unset = u } + +static inline void +decode_bits(const char *prefix, const struct bits *bits, int num, u32 val) +{ + printk("%s %08x:", prefix, val); + while (num--) { + const char *str = val & bits->mask ? bits->set : bits->unset; + if (str) + pr_cont(" %s", str); + bits++; + } + pr_cont("\n"); +} + +static const struct bits isr_bits[] = { + PXA_BIT(ISR_RWM, "RX", "TX"), + PXA_BIT(ISR_ACKNAK, "NAK", "ACK"), + PXA_BIT(ISR_UB, "Bsy", "Rdy"), + PXA_BIT(ISR_IBB, "BusBsy", "BusRdy"), + PXA_BIT(ISR_SSD, "SlaveStop", NULL), + PXA_BIT(ISR_ALD, "ALD", NULL), + PXA_BIT(ISR_ITE, "TxEmpty", NULL), + PXA_BIT(ISR_IRF, "RxFull", NULL), + PXA_BIT(ISR_GCAD, "GenCall", NULL), + PXA_BIT(ISR_SAD, "SlaveAddr", NULL), + PXA_BIT(ISR_BED, "BusErr", NULL), +}; + +static void decode_ISR(unsigned int val) +{ + decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val); +} + +static const struct bits icr_bits[] = { + PXA_BIT(ICR_START, "START", NULL), + PXA_BIT(ICR_STOP, "STOP", NULL), + PXA_BIT(ICR_ACKNAK, "ACKNAK", NULL), + PXA_BIT(ICR_TB, "TB", NULL), + PXA_BIT(ICR_MA, "MA", NULL), + PXA_BIT(ICR_SCLE, "SCLE", "scle"), + PXA_BIT(ICR_IUE, "IUE", "iue"), + PXA_BIT(ICR_GCD, "GCD", NULL), + PXA_BIT(ICR_ITEIE, "ITEIE", NULL), + PXA_BIT(ICR_IRFIE, "IRFIE", NULL), + PXA_BIT(ICR_BEIE, "BEIE", NULL), + PXA_BIT(ICR_SSDIE, "SSDIE", NULL), + PXA_BIT(ICR_ALDIE, "ALDIE", NULL), + PXA_BIT(ICR_SADIE, "SADIE", NULL), + PXA_BIT(ICR_UR, "UR", "ur"), +}; + +#ifdef CONFIG_I2C_PXA_SLAVE +static void decode_ICR(unsigned int val) +{ + decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val); +} +#endif + +static unsigned int i2c_debug = DEBUG; + +static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) +{ + dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, + readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); +} + +#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__) + +static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) +{ + unsigned int i; + struct device *dev = &i2c->adap.dev; + + dev_err(dev, "slave_0x%x error: %s\n", + i2c->req_slave_addr >> 1, why); + dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n", + i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); + dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", + readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), + readl(_ISR(i2c))); + dev_err(dev, "log:"); + for (i = 0; i < i2c->irqlogidx; i++) + pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]); + pr_cont("\n"); +} + +#else /* ifdef DEBUG */ + +#define i2c_debug 0 + +#define show_state(i2c) do { } while (0) +#define decode_ISR(val) do { } while (0) +#define decode_ICR(val) do { } while (0) +#define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0) + +#endif /* ifdef DEBUG / else */ + +static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); + +static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) +{ + return !(readl(_ICR(i2c)) & ICR_SCLE); +} + +static void i2c_pxa_abort(struct pxa_i2c *i2c) +{ + int i = 250; + + if (i2c_pxa_is_slavemode(i2c)) { + dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__); + return; + } + + while ((i > 0) && (readl(_IBMR(i2c)) & IBMR_SDAS) == 0) { + unsigned long icr = readl(_ICR(i2c)); + + icr &= ~ICR_START; + icr |= ICR_ACKNAK | ICR_STOP | ICR_TB; + + writel(icr, _ICR(i2c)); + + show_state(i2c); + + mdelay(1); + i --; + } + + writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), + _ICR(i2c)); +} + +static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) +{ + int timeout = DEF_TIMEOUT; + u32 isr; + + while (1) { + isr = readl(_ISR(i2c)); + if (!(isr & (ISR_IBB | ISR_UB))) + return 0; + + if (isr & ISR_SAD) + timeout += 4; + + if (!timeout--) + break; + + msleep(2); + show_state(i2c); + } + + show_state(i2c); + + return I2C_RETRY; +} + +static int i2c_pxa_wait_master(struct pxa_i2c *i2c) +{ + unsigned long timeout = jiffies + HZ*4; + + while (time_before(jiffies, timeout)) { + if (i2c_debug > 1) + dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", + __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); + + if (readl(_ISR(i2c)) & ISR_SAD) { + if (i2c_debug > 0) + dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__); + goto out; + } + + /* wait for unit and bus being not busy, and we also do a + * quick check of the i2c lines themselves to ensure they've + * gone high... + */ + if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && + readl(_IBMR(i2c)) == (IBMR_SCLS | IBMR_SDAS)) { + if (i2c_debug > 0) + dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); + return 1; + } + + msleep(1); + } + + if (i2c_debug > 0) + dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); + out: + return 0; +} + +static int i2c_pxa_set_master(struct pxa_i2c *i2c) +{ + if (i2c_debug) + dev_dbg(&i2c->adap.dev, "setting to bus master\n"); + + if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) { + dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__); + if (!i2c_pxa_wait_master(i2c)) { + dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__); + return I2C_RETRY; + } + } + + writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); + return 0; +} + +#ifdef CONFIG_I2C_PXA_SLAVE +static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) +{ + unsigned long timeout = jiffies + HZ*1; + + /* wait for stop */ + + show_state(i2c); + + while (time_before(jiffies, timeout)) { + if (i2c_debug > 1) + dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", + __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); + + if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 || + (readl(_ISR(i2c)) & ISR_SAD) != 0 || + (readl(_ICR(i2c)) & ICR_SCLE) == 0) { + if (i2c_debug > 1) + dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); + return 1; + } + + msleep(1); + } + + if (i2c_debug > 0) + dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); + return 0; +} + +/* + * clear the hold on the bus, and take of anything else + * that has been configured + */ +static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) +{ + show_state(i2c); + + if (errcode < 0) { + udelay(100); /* simple delay */ + } else { + /* we need to wait for the stop condition to end */ + + /* if we where in stop, then clear... */ + if (readl(_ICR(i2c)) & ICR_STOP) { + udelay(100); + writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c)); + } + + if (!i2c_pxa_wait_slave(i2c)) { + dev_err(&i2c->adap.dev, "%s: wait timedout\n", + __func__); + return; + } + } + + writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c)); + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); + + if (i2c_debug) { + dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c))); + decode_ICR(readl(_ICR(i2c))); + } +} +#else +#define i2c_pxa_set_slave(i2c, err) do { } while (0) +#endif + +static void i2c_pxa_do_reset(struct pxa_i2c *i2c) +{ + /* reset according to 9.8 */ + writel(ICR_UR, _ICR(i2c)); + writel(I2C_ISR_INIT, _ISR(i2c)); + writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); + + if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) + writel(i2c->slave_addr, _ISAR(i2c)); + + /* set control register values */ + writel(I2C_ICR_INIT | (i2c->fast_mode ? i2c->fm_mask : 0), _ICR(i2c)); + writel(readl(_ICR(i2c)) | (i2c->high_mode ? i2c->hs_mask : 0), _ICR(i2c)); + +#ifdef CONFIG_I2C_PXA_SLAVE + dev_info(&i2c->adap.dev, "Enabling slave mode\n"); + writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c)); +#endif + + i2c_pxa_set_slave(i2c, 0); +} + +static void i2c_pxa_enable(struct pxa_i2c *i2c) +{ + /* enable unit */ + writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); + udelay(100); +} + +static void i2c_pxa_reset(struct pxa_i2c *i2c) +{ + pr_debug("Resetting I2C Controller Unit\n"); + + /* abort any transfer currently under way */ + i2c_pxa_abort(i2c); + i2c_pxa_do_reset(i2c); + i2c_pxa_enable(i2c); +} + + +#ifdef CONFIG_I2C_PXA_SLAVE +/* + * PXA I2C Slave mode + */ + +static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) +{ + if (isr & ISR_BED) { + /* what should we do here? */ + } else { + u8 byte = 0; + + if (i2c->slave != NULL) + i2c_slave_event(i2c->slave, I2C_SLAVE_READ_PROCESSED, + &byte); + + writel(byte, _IDBR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */ + } +} + +static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) +{ + u8 byte = readl(_IDBR(i2c)); + + if (i2c->slave != NULL) + i2c_slave_event(i2c->slave, I2C_SLAVE_WRITE_RECEIVED, &byte); + + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); +} + +static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) +{ + int timeout; + + if (i2c_debug > 0) + dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n", + (isr & ISR_RWM) ? 'r' : 't'); + + if (i2c->slave != NULL) { + if (isr & ISR_RWM) { + u8 byte = 0; + + i2c_slave_event(i2c->slave, I2C_SLAVE_READ_REQUESTED, + &byte); + writel(byte, _IDBR(i2c)); + } else { + i2c_slave_event(i2c->slave, I2C_SLAVE_WRITE_REQUESTED, + NULL); + } + } + + /* + * slave could interrupt in the middle of us generating a + * start condition... if this happens, we'd better back off + * and stop holding the poor thing up + */ + writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); + + timeout = 0x10000; + + while (1) { + if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS) + break; + + timeout--; + + if (timeout <= 0) { + dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); + break; + } + } + + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); +} + +static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) +{ + if (i2c_debug > 2) + dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n"); + + if (i2c->slave != NULL) + i2c_slave_event(i2c->slave, I2C_SLAVE_STOP, NULL); + + if (i2c_debug > 2) + dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n"); + + /* + * If we have a master-mode message waiting, + * kick it off now that the slave has completed. + */ + if (i2c->msg) + i2c_pxa_master_complete(i2c, I2C_RETRY); +} + +static int i2c_pxa_slave_reg(struct i2c_client *slave) +{ + struct pxa_i2c *i2c = slave->adapter->algo_data; + + if (i2c->slave) + return -EBUSY; + + if (!i2c->reg_isar) + return -EAFNOSUPPORT; + + i2c->slave = slave; + i2c->slave_addr = slave->addr; + + writel(i2c->slave_addr, _ISAR(i2c)); + + return 0; +} + +static int i2c_pxa_slave_unreg(struct i2c_client *slave) +{ + struct pxa_i2c *i2c = slave->adapter->algo_data; + + WARN_ON(!i2c->slave); + + i2c->slave_addr = I2C_PXA_SLAVE_ADDR; + writel(i2c->slave_addr, _ISAR(i2c)); + + i2c->slave = NULL; + + return 0; +} +#else +static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) +{ + if (isr & ISR_BED) { + /* what should we do here? */ + } else { + writel(0, _IDBR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); + } +} + +static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) +{ + writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); +} + +static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) +{ + int timeout; + + /* + * slave could interrupt in the middle of us generating a + * start condition... if this happens, we'd better back off + * and stop holding the poor thing up + */ + writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); + writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); + + timeout = 0x10000; + + while (1) { + if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS) + break; + + timeout--; + + if (timeout <= 0) { + dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); + break; + } + } + + writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); +} + +static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) +{ + if (i2c->msg) + i2c_pxa_master_complete(i2c, I2C_RETRY); +} +#endif + +/* + * PXA I2C Master mode + */ + +static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) +{ + u32 icr; + + /* + * Step 1: target slave address into IDBR + */ + i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg); + writel(i2c->req_slave_addr, _IDBR(i2c)); + + /* + * Step 2: initiate the write. + */ + icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); + writel(icr | ICR_START | ICR_TB, _ICR(i2c)); +} + +static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) +{ + u32 icr; + + /* Clear the START, STOP, ACK, TB and MA flags */ + icr = readl(_ICR(i2c)); + icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA); + writel(icr, _ICR(i2c)); +} + +/* + * PXA I2C send master code + * 1. Load master code to IDBR and send it. + * Note for HS mode, set ICR [GPIOEN]. + * 2. Wait until win arbitration. + */ +static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c) +{ + u32 icr; + long timeout; + + spin_lock_irq(&i2c->lock); + i2c->highmode_enter = true; + writel(i2c->master_code, _IDBR(i2c)); + + icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); + icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE; + writel(icr, _ICR(i2c)); + + spin_unlock_irq(&i2c->lock); + timeout = wait_event_timeout(i2c->wait, + i2c->highmode_enter == false, HZ * 1); + + i2c->highmode_enter = false; + + return (timeout == 0) ? I2C_RETRY : 0; +} + +/* + * i2c_pxa_master_complete - complete the message and wake up. + */ +static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) +{ + i2c->msg_ptr = 0; + i2c->msg = NULL; + i2c->msg_idx ++; + i2c->msg_num = 0; + if (ret) + i2c->msg_idx = ret; + if (!i2c->use_pio) + wake_up(&i2c->wait); +} + +static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) +{ + u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); + + again: + /* + * If ISR_ALD is set, we lost arbitration. + */ + if (isr & ISR_ALD) { + /* + * Do we need to do anything here? The PXA docs + * are vague about what happens. + */ + i2c_pxa_scream_blue_murder(i2c, "ALD set"); + + /* + * We ignore this error. We seem to see spurious ALDs + * for seemingly no reason. If we handle them as I think + * they should, we end up causing an I2C error, which + * is painful for some systems. + */ + return; /* ignore */ + } + + if ((isr & ISR_BED) && + (!((i2c->msg->flags & I2C_M_IGNORE_NAK) && + (isr & ISR_ACKNAK)))) { + int ret = BUS_ERROR; + + /* + * I2C bus error - either the device NAK'd us, or + * something more serious happened. If we were NAK'd + * on the initial address phase, we can retry. + */ + if (isr & ISR_ACKNAK) { + if (i2c->msg_ptr == 0 && i2c->msg_idx == 0) + ret = NO_SLAVE; + else + ret = XFER_NAKED; + } + i2c_pxa_master_complete(i2c, ret); + } else if (isr & ISR_RWM) { + /* + * Read mode. We have just sent the address byte, and + * now we must initiate the transfer. + */ + if (i2c->msg_ptr == i2c->msg->len - 1 && + i2c->msg_idx == i2c->msg_num - 1) + icr |= ICR_STOP | ICR_ACKNAK; + + icr |= ICR_ALDIE | ICR_TB; + } else if (i2c->msg_ptr < i2c->msg->len) { + /* + * Write mode. Write the next data byte. + */ + writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c)); + + icr |= ICR_ALDIE | ICR_TB; + + /* + * If this is the last byte of the last message or last byte + * of any message with I2C_M_STOP (e.g. SCCB), send a STOP. + */ + if ((i2c->msg_ptr == i2c->msg->len) && + ((i2c->msg->flags & I2C_M_STOP) || + (i2c->msg_idx == i2c->msg_num - 1))) + icr |= ICR_STOP; + + } else if (i2c->msg_idx < i2c->msg_num - 1) { + /* + * Next segment of the message. + */ + i2c->msg_ptr = 0; + i2c->msg_idx ++; + i2c->msg++; + + /* + * If we aren't doing a repeated start and address, + * go back and try to send the next byte. Note that + * we do not support switching the R/W direction here. + */ + if (i2c->msg->flags & I2C_M_NOSTART) + goto again; + + /* + * Write the next address. + */ + i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg); + writel(i2c->req_slave_addr, _IDBR(i2c)); + + /* + * And trigger a repeated start, and send the byte. + */ + icr &= ~ICR_ALDIE; + icr |= ICR_START | ICR_TB; + } else { + if (i2c->msg->len == 0) + icr |= ICR_MA; + i2c_pxa_master_complete(i2c, 0); + } + + i2c->icrlog[i2c->irqlogidx-1] = icr; + + writel(icr, _ICR(i2c)); + show_state(i2c); +} + +static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) +{ + u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); + + /* + * Read the byte. + */ + i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c)); + + if (i2c->msg_ptr < i2c->msg->len) { + /* + * If this is the last byte of the last + * message, send a STOP. + */ + if (i2c->msg_ptr == i2c->msg->len - 1) + icr |= ICR_STOP | ICR_ACKNAK; + + icr |= ICR_ALDIE | ICR_TB; + } else { + i2c_pxa_master_complete(i2c, 0); + } + + i2c->icrlog[i2c->irqlogidx-1] = icr; + + writel(icr, _ICR(i2c)); +} + +#define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \ + ISR_SAD | ISR_BED) +static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) +{ + struct pxa_i2c *i2c = dev_id; + u32 isr = readl(_ISR(i2c)); + + if (!(isr & VALID_INT_SOURCE)) + return IRQ_NONE; + + if (i2c_debug > 2 && 0) { + dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", + __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); + decode_ISR(isr); + } + + if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog)) + i2c->isrlog[i2c->irqlogidx++] = isr; + + show_state(i2c); + + /* + * Always clear all pending IRQs. + */ + writel(isr & VALID_INT_SOURCE, _ISR(i2c)); + + if (isr & ISR_SAD) + i2c_pxa_slave_start(i2c, isr); + if (isr & ISR_SSD) + i2c_pxa_slave_stop(i2c); + + if (i2c_pxa_is_slavemode(i2c)) { + if (isr & ISR_ITE) + i2c_pxa_slave_txempty(i2c, isr); + if (isr & ISR_IRF) + i2c_pxa_slave_rxfull(i2c, isr); + } else if (i2c->msg && (!i2c->highmode_enter)) { + if (isr & ISR_ITE) + i2c_pxa_irq_txempty(i2c, isr); + if (isr & ISR_IRF) + i2c_pxa_irq_rxfull(i2c, isr); + } else if ((isr & ISR_ITE) && i2c->highmode_enter) { + i2c->highmode_enter = false; + wake_up(&i2c->wait); + } else { + i2c_pxa_scream_blue_murder(i2c, "spurious irq"); + } + + return IRQ_HANDLED; +} + +/* + * We are protected by the adapter bus mutex. + */ +static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) +{ + long timeout; + int ret; + + /* + * Wait for the bus to become free. + */ + ret = i2c_pxa_wait_bus_not_busy(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); + i2c_recover_bus(&i2c->adap); + goto out; + } + + /* + * Set master mode. + */ + ret = i2c_pxa_set_master(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); + goto out; + } + + if (i2c->high_mode) { + ret = i2c_pxa_send_mastercode(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); + goto out; + } + } + + spin_lock_irq(&i2c->lock); + + i2c->msg = msg; + i2c->msg_num = num; + i2c->msg_idx = 0; + i2c->msg_ptr = 0; + i2c->irqlogidx = 0; + + i2c_pxa_start_message(i2c); + + spin_unlock_irq(&i2c->lock); + + /* + * The rest of the processing occurs in the interrupt handler. + */ + timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); + i2c_pxa_stop_message(i2c); + + /* + * We place the return code in i2c->msg_idx. + */ + ret = i2c->msg_idx; + + if (!timeout && i2c->msg_num) { + i2c_pxa_scream_blue_murder(i2c, "timeout with active message"); + i2c_recover_bus(&i2c->adap); + ret = I2C_RETRY; + } + + out: + return ret; +} + +static int i2c_pxa_internal_xfer(struct pxa_i2c *i2c, + struct i2c_msg *msgs, int num, + int (*xfer)(struct pxa_i2c *, + struct i2c_msg *, int num)) +{ + int ret, i; + + for (i = 0; ; ) { + ret = xfer(i2c, msgs, num); + if (ret != I2C_RETRY && ret != NO_SLAVE) + goto out; + if (++i >= i2c->adap.retries) + break; + + if (i2c_debug) + dev_dbg(&i2c->adap.dev, "Retrying transmission\n"); + udelay(100); + } + if (ret != NO_SLAVE) + i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); + ret = -EREMOTEIO; + out: + i2c_pxa_set_slave(i2c, ret); + return ret; +} + +static int i2c_pxa_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], int num) +{ + struct pxa_i2c *i2c = adap->algo_data; + + return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_xfer); +} + +static u32 i2c_pxa_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART; +} + +static const struct i2c_algorithm i2c_pxa_algorithm = { + .master_xfer = i2c_pxa_xfer, + .functionality = i2c_pxa_functionality, +#ifdef CONFIG_I2C_PXA_SLAVE + .reg_slave = i2c_pxa_slave_reg, + .unreg_slave = i2c_pxa_slave_unreg, +#endif +}; + +/* Non-interrupt mode support */ +static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) +{ + /* make timeout the same as for interrupt based functions */ + long timeout = 2 * DEF_TIMEOUT; + + /* + * Wait for the bus to become free. + */ + while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) + udelay(1000); + + if (timeout < 0) { + show_state(i2c); + dev_err(&i2c->adap.dev, + "i2c_pxa: timeout waiting for bus free (set_master)\n"); + return I2C_RETRY; + } + + /* + * Set master mode. + */ + writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); + + return 0; +} + +static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, + struct i2c_msg *msg, int num) +{ + unsigned long timeout = 500000; /* 5 seconds */ + int ret = 0; + + ret = i2c_pxa_pio_set_master(i2c); + if (ret) + goto out; + + i2c->msg = msg; + i2c->msg_num = num; + i2c->msg_idx = 0; + i2c->msg_ptr = 0; + i2c->irqlogidx = 0; + + i2c_pxa_start_message(i2c); + + while (i2c->msg_num > 0 && --timeout) { + i2c_pxa_handler(0, i2c); + udelay(10); + } + + i2c_pxa_stop_message(i2c); + + /* + * We place the return code in i2c->msg_idx. + */ + ret = i2c->msg_idx; + +out: + if (timeout == 0) { + i2c_pxa_scream_blue_murder(i2c, "timeout (do_pio_xfer)"); + ret = I2C_RETRY; + } + + return ret; +} + +static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], int num) +{ + struct pxa_i2c *i2c = adap->algo_data; + + /* If the I2C controller is disabled we need to reset it + (probably due to a suspend/resume destroying state). We do + this here as we can then avoid worrying about resuming the + controller before its users. */ + if (!(readl(_ICR(i2c)) & ICR_IUE)) + i2c_pxa_reset(i2c); + + return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_pio_xfer); +} + +static const struct i2c_algorithm i2c_pxa_pio_algorithm = { + .master_xfer = i2c_pxa_pio_xfer, + .functionality = i2c_pxa_functionality, +#ifdef CONFIG_I2C_PXA_SLAVE + .reg_slave = i2c_pxa_slave_reg, + .unreg_slave = i2c_pxa_slave_unreg, +#endif +}; + +static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, + enum pxa_i2c_types *i2c_types) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(i2c_pxa_dt_ids, &pdev->dev); + + if (!of_id) + return 1; + + /* For device tree we always use the dynamic or alias-assigned ID */ + i2c->adap.nr = -1; + + if (of_get_property(np, "mrvl,i2c-polling", NULL)) + i2c->use_pio = 1; + if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) + i2c->fast_mode = 1; + + *i2c_types = (enum pxa_i2c_types)(of_id->data); + + return 0; +} + +static int i2c_pxa_probe_pdata(struct platform_device *pdev, + struct pxa_i2c *i2c, + enum pxa_i2c_types *i2c_types) +{ + struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev); + const struct platform_device_id *id = platform_get_device_id(pdev); + + *i2c_types = id->driver_data; + if (plat) { + i2c->use_pio = plat->use_pio; + i2c->fast_mode = plat->fast_mode; + i2c->high_mode = plat->high_mode; + i2c->master_code = plat->master_code; + if (!i2c->master_code) + i2c->master_code = 0xe; + i2c->rate = plat->rate; + } + return 0; +} + +static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap) +{ + struct pxa_i2c *i2c = adap->algo_data; + u32 ibmr = readl(_IBMR(i2c)); + + /* + * Program the GPIOs to reflect the current I2C bus state while + * we transition to recovery; this avoids glitching the bus. + */ + gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS); + gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS); + + WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery)); +} + +static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap) +{ + struct pxa_i2c *i2c = adap->algo_data; + u32 isr; + + /* + * The bus should now be free. Clear up the I2C controller before + * handing control of the bus back to avoid the bus changing state. + */ + isr = readl(_ISR(i2c)); + if (isr & (ISR_UB | ISR_IBB)) { + dev_dbg(&i2c->adap.dev, + "recovery: resetting controller, ISR=0x%08x\n", isr); + i2c_pxa_do_reset(i2c); + } + + WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default)); + + dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n", + readl(_IBMR(i2c)), readl(_ISR(i2c))); + + i2c_pxa_enable(i2c); +} + +static int i2c_pxa_init_recovery(struct pxa_i2c *i2c) +{ + struct i2c_bus_recovery_info *bri = &i2c->recovery; + struct device *dev = i2c->adap.dev.parent; + + /* + * When slave mode is enabled, we are not the only master on the bus. + * Bus recovery can only be performed when we are the master, which + * we can't be certain of. Therefore, when slave mode is enabled, do + * not configure bus recovery. + */ + if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) + return 0; + + i2c->pinctrl = devm_pinctrl_get(dev); + if (PTR_ERR(i2c->pinctrl) == -ENODEV) + i2c->pinctrl = NULL; + if (IS_ERR(i2c->pinctrl)) + return PTR_ERR(i2c->pinctrl); + + if (!i2c->pinctrl) + return 0; + + i2c->pinctrl_default = pinctrl_lookup_state(i2c->pinctrl, + PINCTRL_STATE_DEFAULT); + i2c->pinctrl_recovery = pinctrl_lookup_state(i2c->pinctrl, "recovery"); + + if (IS_ERR(i2c->pinctrl_default) || IS_ERR(i2c->pinctrl_recovery)) { + dev_info(dev, "missing pinmux recovery information: %ld %ld\n", + PTR_ERR(i2c->pinctrl_default), + PTR_ERR(i2c->pinctrl_recovery)); + return 0; + } + + /* + * Claiming GPIOs can influence the pinmux state, and may glitch the + * I2C bus. Do this carefully. + */ + bri->scl_gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN); + if (bri->scl_gpiod == ERR_PTR(-EPROBE_DEFER)) + return -EPROBE_DEFER; + if (IS_ERR(bri->scl_gpiod)) { + dev_info(dev, "missing scl gpio recovery information: %pe\n", + bri->scl_gpiod); + return 0; + } + + /* + * We have SCL. Pull SCL low and wait a bit so that SDA glitches + * have no effect. + */ + gpiod_direction_output(bri->scl_gpiod, 0); + udelay(10); + bri->sda_gpiod = devm_gpiod_get(dev, "sda", GPIOD_OUT_HIGH_OPEN_DRAIN); + + /* Wait a bit in case of a SDA glitch, and then release SCL. */ + udelay(10); + gpiod_direction_output(bri->scl_gpiod, 1); + + if (bri->sda_gpiod == ERR_PTR(-EPROBE_DEFER)) + return -EPROBE_DEFER; + + if (IS_ERR(bri->sda_gpiod)) { + dev_info(dev, "missing sda gpio recovery information: %pe\n", + bri->sda_gpiod); + return 0; + } + + bri->prepare_recovery = i2c_pxa_prepare_recovery; + bri->unprepare_recovery = i2c_pxa_unprepare_recovery; + bri->recover_bus = i2c_generic_scl_recovery; + + i2c->adap.bus_recovery_info = bri; + + /* + * Claiming GPIOs can change the pinmux state, which confuses the + * pinctrl since pinctrl's idea of the current setting is unaffected + * by the pinmux change caused by claiming the GPIO. Work around that + * by switching pinctrl to the GPIO state here. We do it this way to + * avoid glitching the I2C bus. + */ + pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery); + + return pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default); +} + +static int i2c_pxa_probe(struct platform_device *dev) +{ + struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev); + enum pxa_i2c_types i2c_type; + struct pxa_i2c *i2c; + struct resource *res = NULL; + int ret, irq; + + i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ + i2c->adap.nr = dev->id; + i2c->adap.owner = THIS_MODULE; + i2c->adap.retries = 5; + i2c->adap.algo_data = i2c; + i2c->adap.dev.parent = &dev->dev; +#ifdef CONFIG_OF + i2c->adap.dev.of_node = dev->dev.of_node; +#endif + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + i2c->reg_base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(i2c->reg_base)) + return PTR_ERR(i2c->reg_base); + + irq = platform_get_irq(dev, 0); + if (irq < 0) + return irq; + + ret = i2c_pxa_init_recovery(i2c); + if (ret) + return ret; + + ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); + if (ret > 0) + ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); + if (ret < 0) + return ret; + + spin_lock_init(&i2c->lock); + init_waitqueue_head(&i2c->wait); + + strscpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name)); + + i2c->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(i2c->clk)) { + dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk)); + return PTR_ERR(i2c->clk); + } + + i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; + i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr; + i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr; + i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr; + i2c->fm_mask = pxa_reg_layout[i2c_type].fm; + i2c->hs_mask = pxa_reg_layout[i2c_type].hs; + + if (i2c_type != REGS_CE4100) + i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; + + if (i2c_type == REGS_PXA910) { + i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr; + i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr; + } + + i2c->iobase = res->start; + i2c->iosize = resource_size(res); + + i2c->irq = irq; + + i2c->slave_addr = I2C_PXA_SLAVE_ADDR; + i2c->highmode_enter = false; + + if (plat) { + i2c->adap.class = plat->class; + } + + if (i2c->high_mode) { + if (i2c->rate) { + clk_set_rate(i2c->clk, i2c->rate); + pr_info("i2c: <%s> set rate to %ld\n", + i2c->adap.name, clk_get_rate(i2c->clk)); + } else + pr_warn("i2c: <%s> clock rate not set\n", + i2c->adap.name); + } + + clk_prepare_enable(i2c->clk); + + if (i2c->use_pio) { + i2c->adap.algo = &i2c_pxa_pio_algorithm; + } else { + i2c->adap.algo = &i2c_pxa_algorithm; + ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler, + IRQF_SHARED | IRQF_NO_SUSPEND, + dev_name(&dev->dev), i2c); + if (ret) { + dev_err(&dev->dev, "failed to request irq: %d\n", ret); + goto ereqirq; + } + } + + i2c_pxa_reset(i2c); + + ret = i2c_add_numbered_adapter(&i2c->adap); + if (ret < 0) + goto ereqirq; + + platform_set_drvdata(dev, i2c); + +#ifdef CONFIG_I2C_PXA_SLAVE + dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n", + i2c->slave_addr); +#else + dev_info(&i2c->adap.dev, " PXA I2C adapter\n"); +#endif + return 0; + +ereqirq: + clk_disable_unprepare(i2c->clk); + return ret; +} + +static int i2c_pxa_remove(struct platform_device *dev) +{ + struct pxa_i2c *i2c = platform_get_drvdata(dev); + + i2c_del_adapter(&i2c->adap); + + clk_disable_unprepare(i2c->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int i2c_pxa_suspend_noirq(struct device *dev) +{ + struct pxa_i2c *i2c = dev_get_drvdata(dev); + + clk_disable(i2c->clk); + + return 0; +} + +static int i2c_pxa_resume_noirq(struct device *dev) +{ + struct pxa_i2c *i2c = dev_get_drvdata(dev); + + clk_enable(i2c->clk); + i2c_pxa_reset(i2c); + + return 0; +} + +static const struct dev_pm_ops i2c_pxa_dev_pm_ops = { + .suspend_noirq = i2c_pxa_suspend_noirq, + .resume_noirq = i2c_pxa_resume_noirq, +}; + +#define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops) +#else +#define I2C_PXA_DEV_PM_OPS NULL +#endif + +static struct platform_driver i2c_pxa_driver = { + .probe = i2c_pxa_probe, + .remove = i2c_pxa_remove, + .driver = { + .name = "pxa2xx-i2c", + .pm = I2C_PXA_DEV_PM_OPS, + .of_match_table = i2c_pxa_dt_ids, + }, + .id_table = i2c_pxa_id_table, +}; + +static int __init i2c_adap_pxa_init(void) +{ + return platform_driver_register(&i2c_pxa_driver); +} + +static void __exit i2c_adap_pxa_exit(void) +{ + platform_driver_unregister(&i2c_pxa_driver); +} + +MODULE_LICENSE("GPL"); + +subsys_initcall(i2c_adap_pxa_init); +module_exit(i2c_adap_pxa_exit); |