summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-stm32f7.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses/i2c-stm32f7.c')
-rw-r--r--drivers/i2c/busses/i2c-stm32f7.c2499
1 files changed, 2499 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
new file mode 100644
index 000000000..cb995449e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -0,0 +1,2499 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for STMicroelectronics STM32F7 I2C controller
+ *
+ * This I2C controller is described in the STM32F75xxx and STM32F74xxx Soc
+ * reference manual.
+ * Please see below a link to the documentation:
+ * http://www.st.com/resource/en/reference_manual/dm00124865.pdf
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2017
+ * Copyright (C) STMicroelectronics 2017
+ * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *
+ * This driver is based on i2c-stm32f4.c
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include "i2c-stm32.h"
+
+/* STM32F7 I2C registers */
+#define STM32F7_I2C_CR1 0x00
+#define STM32F7_I2C_CR2 0x04
+#define STM32F7_I2C_OAR1 0x08
+#define STM32F7_I2C_OAR2 0x0C
+#define STM32F7_I2C_PECR 0x20
+#define STM32F7_I2C_TIMINGR 0x10
+#define STM32F7_I2C_ISR 0x18
+#define STM32F7_I2C_ICR 0x1C
+#define STM32F7_I2C_RXDR 0x24
+#define STM32F7_I2C_TXDR 0x28
+
+/* STM32F7 I2C control 1 */
+#define STM32F7_I2C_CR1_PECEN BIT(23)
+#define STM32F7_I2C_CR1_ALERTEN BIT(22)
+#define STM32F7_I2C_CR1_SMBHEN BIT(20)
+#define STM32F7_I2C_CR1_WUPEN BIT(18)
+#define STM32F7_I2C_CR1_SBC BIT(16)
+#define STM32F7_I2C_CR1_RXDMAEN BIT(15)
+#define STM32F7_I2C_CR1_TXDMAEN BIT(14)
+#define STM32F7_I2C_CR1_ANFOFF BIT(12)
+#define STM32F7_I2C_CR1_DNF_MASK GENMASK(11, 8)
+#define STM32F7_I2C_CR1_DNF(n) (((n) & 0xf) << 8)
+#define STM32F7_I2C_CR1_ERRIE BIT(7)
+#define STM32F7_I2C_CR1_TCIE BIT(6)
+#define STM32F7_I2C_CR1_STOPIE BIT(5)
+#define STM32F7_I2C_CR1_NACKIE BIT(4)
+#define STM32F7_I2C_CR1_ADDRIE BIT(3)
+#define STM32F7_I2C_CR1_RXIE BIT(2)
+#define STM32F7_I2C_CR1_TXIE BIT(1)
+#define STM32F7_I2C_CR1_PE BIT(0)
+#define STM32F7_I2C_ALL_IRQ_MASK (STM32F7_I2C_CR1_ERRIE \
+ | STM32F7_I2C_CR1_TCIE \
+ | STM32F7_I2C_CR1_STOPIE \
+ | STM32F7_I2C_CR1_NACKIE \
+ | STM32F7_I2C_CR1_RXIE \
+ | STM32F7_I2C_CR1_TXIE)
+#define STM32F7_I2C_XFER_IRQ_MASK (STM32F7_I2C_CR1_TCIE \
+ | STM32F7_I2C_CR1_STOPIE \
+ | STM32F7_I2C_CR1_NACKIE \
+ | STM32F7_I2C_CR1_RXIE \
+ | STM32F7_I2C_CR1_TXIE)
+
+/* STM32F7 I2C control 2 */
+#define STM32F7_I2C_CR2_PECBYTE BIT(26)
+#define STM32F7_I2C_CR2_RELOAD BIT(24)
+#define STM32F7_I2C_CR2_NBYTES_MASK GENMASK(23, 16)
+#define STM32F7_I2C_CR2_NBYTES(n) (((n) & 0xff) << 16)
+#define STM32F7_I2C_CR2_NACK BIT(15)
+#define STM32F7_I2C_CR2_STOP BIT(14)
+#define STM32F7_I2C_CR2_START BIT(13)
+#define STM32F7_I2C_CR2_HEAD10R BIT(12)
+#define STM32F7_I2C_CR2_ADD10 BIT(11)
+#define STM32F7_I2C_CR2_RD_WRN BIT(10)
+#define STM32F7_I2C_CR2_SADD10_MASK GENMASK(9, 0)
+#define STM32F7_I2C_CR2_SADD10(n) (((n) & \
+ STM32F7_I2C_CR2_SADD10_MASK))
+#define STM32F7_I2C_CR2_SADD7_MASK GENMASK(7, 1)
+#define STM32F7_I2C_CR2_SADD7(n) (((n) & 0x7f) << 1)
+
+/* STM32F7 I2C Own Address 1 */
+#define STM32F7_I2C_OAR1_OA1EN BIT(15)
+#define STM32F7_I2C_OAR1_OA1MODE BIT(10)
+#define STM32F7_I2C_OAR1_OA1_10_MASK GENMASK(9, 0)
+#define STM32F7_I2C_OAR1_OA1_10(n) (((n) & \
+ STM32F7_I2C_OAR1_OA1_10_MASK))
+#define STM32F7_I2C_OAR1_OA1_7_MASK GENMASK(7, 1)
+#define STM32F7_I2C_OAR1_OA1_7(n) (((n) & 0x7f) << 1)
+#define STM32F7_I2C_OAR1_MASK (STM32F7_I2C_OAR1_OA1_7_MASK \
+ | STM32F7_I2C_OAR1_OA1_10_MASK \
+ | STM32F7_I2C_OAR1_OA1EN \
+ | STM32F7_I2C_OAR1_OA1MODE)
+
+/* STM32F7 I2C Own Address 2 */
+#define STM32F7_I2C_OAR2_OA2EN BIT(15)
+#define STM32F7_I2C_OAR2_OA2MSK_MASK GENMASK(10, 8)
+#define STM32F7_I2C_OAR2_OA2MSK(n) (((n) & 0x7) << 8)
+#define STM32F7_I2C_OAR2_OA2_7_MASK GENMASK(7, 1)
+#define STM32F7_I2C_OAR2_OA2_7(n) (((n) & 0x7f) << 1)
+#define STM32F7_I2C_OAR2_MASK (STM32F7_I2C_OAR2_OA2MSK_MASK \
+ | STM32F7_I2C_OAR2_OA2_7_MASK \
+ | STM32F7_I2C_OAR2_OA2EN)
+
+/* STM32F7 I2C Interrupt Status */
+#define STM32F7_I2C_ISR_ADDCODE_MASK GENMASK(23, 17)
+#define STM32F7_I2C_ISR_ADDCODE_GET(n) \
+ (((n) & STM32F7_I2C_ISR_ADDCODE_MASK) >> 17)
+#define STM32F7_I2C_ISR_DIR BIT(16)
+#define STM32F7_I2C_ISR_BUSY BIT(15)
+#define STM32F7_I2C_ISR_ALERT BIT(13)
+#define STM32F7_I2C_ISR_PECERR BIT(11)
+#define STM32F7_I2C_ISR_ARLO BIT(9)
+#define STM32F7_I2C_ISR_BERR BIT(8)
+#define STM32F7_I2C_ISR_TCR BIT(7)
+#define STM32F7_I2C_ISR_TC BIT(6)
+#define STM32F7_I2C_ISR_STOPF BIT(5)
+#define STM32F7_I2C_ISR_NACKF BIT(4)
+#define STM32F7_I2C_ISR_ADDR BIT(3)
+#define STM32F7_I2C_ISR_RXNE BIT(2)
+#define STM32F7_I2C_ISR_TXIS BIT(1)
+#define STM32F7_I2C_ISR_TXE BIT(0)
+
+/* STM32F7 I2C Interrupt Clear */
+#define STM32F7_I2C_ICR_ALERTCF BIT(13)
+#define STM32F7_I2C_ICR_PECCF BIT(11)
+#define STM32F7_I2C_ICR_ARLOCF BIT(9)
+#define STM32F7_I2C_ICR_BERRCF BIT(8)
+#define STM32F7_I2C_ICR_STOPCF BIT(5)
+#define STM32F7_I2C_ICR_NACKCF BIT(4)
+#define STM32F7_I2C_ICR_ADDRCF BIT(3)
+
+/* STM32F7 I2C Timing */
+#define STM32F7_I2C_TIMINGR_PRESC(n) (((n) & 0xf) << 28)
+#define STM32F7_I2C_TIMINGR_SCLDEL(n) (((n) & 0xf) << 20)
+#define STM32F7_I2C_TIMINGR_SDADEL(n) (((n) & 0xf) << 16)
+#define STM32F7_I2C_TIMINGR_SCLH(n) (((n) & 0xff) << 8)
+#define STM32F7_I2C_TIMINGR_SCLL(n) ((n) & 0xff)
+
+#define STM32F7_I2C_MAX_LEN 0xff
+#define STM32F7_I2C_DMA_LEN_MIN 0x16
+enum {
+ STM32F7_SLAVE_HOSTNOTIFY,
+ STM32F7_SLAVE_7_10_BITS_ADDR,
+ STM32F7_SLAVE_7_BITS_ADDR,
+ STM32F7_I2C_MAX_SLAVE
+};
+
+#define STM32F7_I2C_DNF_DEFAULT 0
+#define STM32F7_I2C_DNF_MAX 15
+
+#define STM32F7_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */
+#define STM32F7_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */
+
+#define STM32F7_I2C_RISE_TIME_DEFAULT 25 /* ns */
+#define STM32F7_I2C_FALL_TIME_DEFAULT 10 /* ns */
+
+#define STM32F7_PRESC_MAX BIT(4)
+#define STM32F7_SCLDEL_MAX BIT(4)
+#define STM32F7_SDADEL_MAX BIT(4)
+#define STM32F7_SCLH_MAX BIT(8)
+#define STM32F7_SCLL_MAX BIT(8)
+
+#define STM32F7_AUTOSUSPEND_DELAY (HZ / 100)
+
+/**
+ * struct stm32f7_i2c_regs - i2c f7 registers backup
+ * @cr1: Control register 1
+ * @cr2: Control register 2
+ * @oar1: Own address 1 register
+ * @oar2: Own address 2 register
+ * @tmgr: Timing register
+ */
+struct stm32f7_i2c_regs {
+ u32 cr1;
+ u32 cr2;
+ u32 oar1;
+ u32 oar2;
+ u32 tmgr;
+};
+
+/**
+ * struct stm32f7_i2c_spec - private i2c specification timing
+ * @rate: I2C bus speed (Hz)
+ * @fall_max: Max fall time of both SDA and SCL signals (ns)
+ * @rise_max: Max rise time of both SDA and SCL signals (ns)
+ * @hddat_min: Min data hold time (ns)
+ * @vddat_max: Max data valid time (ns)
+ * @sudat_min: Min data setup time (ns)
+ * @l_min: Min low period of the SCL clock (ns)
+ * @h_min: Min high period of the SCL clock (ns)
+ */
+struct stm32f7_i2c_spec {
+ u32 rate;
+ u32 fall_max;
+ u32 rise_max;
+ u32 hddat_min;
+ u32 vddat_max;
+ u32 sudat_min;
+ u32 l_min;
+ u32 h_min;
+};
+
+/**
+ * struct stm32f7_i2c_setup - private I2C timing setup parameters
+ * @speed_freq: I2C speed frequency (Hz)
+ * @clock_src: I2C clock source frequency (Hz)
+ * @rise_time: Rise time (ns)
+ * @fall_time: Fall time (ns)
+ * @fmp_clr_offset: Fast Mode Plus clear register offset from set register
+ */
+struct stm32f7_i2c_setup {
+ u32 speed_freq;
+ u32 clock_src;
+ u32 rise_time;
+ u32 fall_time;
+ u32 fmp_clr_offset;
+};
+
+/**
+ * struct stm32f7_i2c_timings - private I2C output parameters
+ * @node: List entry
+ * @presc: Prescaler value
+ * @scldel: Data setup time
+ * @sdadel: Data hold time
+ * @sclh: SCL high period (master mode)
+ * @scll: SCL low period (master mode)
+ */
+struct stm32f7_i2c_timings {
+ struct list_head node;
+ u8 presc;
+ u8 scldel;
+ u8 sdadel;
+ u8 sclh;
+ u8 scll;
+};
+
+/**
+ * struct stm32f7_i2c_msg - client specific data
+ * @addr: 8-bit or 10-bit slave addr, including r/w bit
+ * @count: number of bytes to be transferred
+ * @buf: data buffer
+ * @result: result of the transfer
+ * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ * @smbus: boolean to know if the I2C IP is used in SMBus mode
+ * @size: type of SMBus protocol
+ * @read_write: direction of SMBus protocol
+ * SMBus block read and SMBus block write - block read process call protocols
+ * @smbus_buf: buffer to be used for SMBus protocol transfer. It will
+ * contain a maximum of 32 bytes of data + byte command + byte count + PEC
+ * This buffer has to be 32-bit aligned to be compliant with memory address
+ * register in DMA mode.
+ */
+struct stm32f7_i2c_msg {
+ u16 addr;
+ u32 count;
+ u8 *buf;
+ int result;
+ bool stop;
+ bool smbus;
+ int size;
+ char read_write;
+ u8 smbus_buf[I2C_SMBUS_BLOCK_MAX + 3] __aligned(4);
+};
+
+/**
+ * struct stm32f7_i2c_alert - SMBus alert specific data
+ * @setup: platform data for the smbus_alert i2c client
+ * @ara: I2C slave device used to respond to the SMBus Alert with Alert
+ * Response Address
+ */
+struct stm32f7_i2c_alert {
+ struct i2c_smbus_alert_setup setup;
+ struct i2c_client *ara;
+};
+
+/**
+ * struct stm32f7_i2c_dev - private data of the controller
+ * @adap: I2C adapter for this controller
+ * @dev: device for this controller
+ * @base: virtual memory area
+ * @complete: completion of I2C message
+ * @clk: hw i2c clock
+ * @bus_rate: I2C clock frequency of the controller
+ * @msg: Pointer to data to be written
+ * @msg_num: number of I2C messages to be executed
+ * @msg_id: message identifiant
+ * @f7_msg: customized i2c msg for driver usage
+ * @setup: I2C timing input setup
+ * @timing: I2C computed timings
+ * @slave: list of slave devices registered on the I2C bus
+ * @slave_running: slave device currently used
+ * @backup_regs: backup of i2c controller registers (for suspend/resume)
+ * @slave_dir: transfer direction for the current slave device
+ * @master_mode: boolean to know in which mode the I2C is running (master or
+ * slave)
+ * @dma: dma data
+ * @use_dma: boolean to know if dma is used in the current transfer
+ * @regmap: holds SYSCFG phandle for Fast Mode Plus bits
+ * @fmp_sreg: register address for setting Fast Mode Plus bits
+ * @fmp_creg: register address for clearing Fast Mode Plus bits
+ * @fmp_mask: mask for Fast Mode Plus bits in set register
+ * @wakeup_src: boolean to know if the device is a wakeup source
+ * @smbus_mode: states that the controller is configured in SMBus mode
+ * @host_notify_client: SMBus host-notify client
+ * @analog_filter: boolean to indicate enabling of the analog filter
+ * @dnf_dt: value of digital filter requested via dt
+ * @dnf: value of digital filter to apply
+ * @alert: SMBus alert specific data
+ */
+struct stm32f7_i2c_dev {
+ struct i2c_adapter adap;
+ struct device *dev;
+ void __iomem *base;
+ struct completion complete;
+ struct clk *clk;
+ unsigned int bus_rate;
+ struct i2c_msg *msg;
+ unsigned int msg_num;
+ unsigned int msg_id;
+ struct stm32f7_i2c_msg f7_msg;
+ struct stm32f7_i2c_setup setup;
+ struct stm32f7_i2c_timings timing;
+ struct i2c_client *slave[STM32F7_I2C_MAX_SLAVE];
+ struct i2c_client *slave_running;
+ struct stm32f7_i2c_regs backup_regs;
+ u32 slave_dir;
+ bool master_mode;
+ struct stm32_i2c_dma *dma;
+ bool use_dma;
+ struct regmap *regmap;
+ u32 fmp_sreg;
+ u32 fmp_creg;
+ u32 fmp_mask;
+ bool wakeup_src;
+ bool smbus_mode;
+ struct i2c_client *host_notify_client;
+ bool analog_filter;
+ u32 dnf_dt;
+ u32 dnf;
+ struct stm32f7_i2c_alert *alert;
+};
+
+/*
+ * All these values are coming from I2C Specification, Version 6.0, 4th of
+ * April 2014.
+ *
+ * Table10. Characteristics of the SDA and SCL bus lines for Standard, Fast,
+ * and Fast-mode Plus I2C-bus devices
+ */
+static struct stm32f7_i2c_spec stm32f7_i2c_specs[] = {
+ {
+ .rate = I2C_MAX_STANDARD_MODE_FREQ,
+ .fall_max = 300,
+ .rise_max = 1000,
+ .hddat_min = 0,
+ .vddat_max = 3450,
+ .sudat_min = 250,
+ .l_min = 4700,
+ .h_min = 4000,
+ },
+ {
+ .rate = I2C_MAX_FAST_MODE_FREQ,
+ .fall_max = 300,
+ .rise_max = 300,
+ .hddat_min = 0,
+ .vddat_max = 900,
+ .sudat_min = 100,
+ .l_min = 1300,
+ .h_min = 600,
+ },
+ {
+ .rate = I2C_MAX_FAST_MODE_PLUS_FREQ,
+ .fall_max = 100,
+ .rise_max = 120,
+ .hddat_min = 0,
+ .vddat_max = 450,
+ .sudat_min = 50,
+ .l_min = 500,
+ .h_min = 260,
+ },
+};
+
+static const struct stm32f7_i2c_setup stm32f7_setup = {
+ .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
+ .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
+};
+
+static const struct stm32f7_i2c_setup stm32mp15_setup = {
+ .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
+ .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
+ .fmp_clr_offset = 0x40,
+};
+
+static const struct stm32f7_i2c_setup stm32mp13_setup = {
+ .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
+ .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
+ .fmp_clr_offset = 0x4,
+};
+
+static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask)
+{
+ writel_relaxed(readl_relaxed(reg) | mask, reg);
+}
+
+static inline void stm32f7_i2c_clr_bits(void __iomem *reg, u32 mask)
+{
+ writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+}
+
+static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
+{
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
+}
+
+static struct stm32f7_i2c_spec *stm32f7_get_specs(u32 rate)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(stm32f7_i2c_specs); i++)
+ if (rate <= stm32f7_i2c_specs[i].rate)
+ return &stm32f7_i2c_specs[i];
+
+ return ERR_PTR(-EINVAL);
+}
+
+#define RATE_MIN(rate) ((rate) * 8 / 10)
+static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
+ struct stm32f7_i2c_setup *setup,
+ struct stm32f7_i2c_timings *output)
+{
+ struct stm32f7_i2c_spec *specs;
+ u32 p_prev = STM32F7_PRESC_MAX;
+ u32 i2cclk = DIV_ROUND_CLOSEST(NSEC_PER_SEC,
+ setup->clock_src);
+ u32 i2cbus = DIV_ROUND_CLOSEST(NSEC_PER_SEC,
+ setup->speed_freq);
+ u32 clk_error_prev = i2cbus;
+ u32 tsync;
+ u32 af_delay_min, af_delay_max;
+ u32 dnf_delay;
+ u32 clk_min, clk_max;
+ int sdadel_min, sdadel_max;
+ int scldel_min;
+ struct stm32f7_i2c_timings *v, *_v, *s;
+ struct list_head solutions;
+ u16 p, l, a, h;
+ int ret = 0;
+
+ specs = stm32f7_get_specs(setup->speed_freq);
+ if (specs == ERR_PTR(-EINVAL)) {
+ dev_err(i2c_dev->dev, "speed out of bound {%d}\n",
+ setup->speed_freq);
+ return -EINVAL;
+ }
+
+ if ((setup->rise_time > specs->rise_max) ||
+ (setup->fall_time > specs->fall_max)) {
+ dev_err(i2c_dev->dev,
+ "timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
+ setup->rise_time, specs->rise_max,
+ setup->fall_time, specs->fall_max);
+ return -EINVAL;
+ }
+
+ i2c_dev->dnf = DIV_ROUND_CLOSEST(i2c_dev->dnf_dt, i2cclk);
+ if (i2c_dev->dnf > STM32F7_I2C_DNF_MAX) {
+ dev_err(i2c_dev->dev,
+ "DNF out of bound %d/%d\n",
+ i2c_dev->dnf * i2cclk, STM32F7_I2C_DNF_MAX * i2cclk);
+ return -EINVAL;
+ }
+
+ /* Analog and Digital Filters */
+ af_delay_min =
+ (i2c_dev->analog_filter ?
+ STM32F7_I2C_ANALOG_FILTER_DELAY_MIN : 0);
+ af_delay_max =
+ (i2c_dev->analog_filter ?
+ STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0);
+ dnf_delay = i2c_dev->dnf * i2cclk;
+
+ sdadel_min = specs->hddat_min + setup->fall_time -
+ af_delay_min - (i2c_dev->dnf + 3) * i2cclk;
+
+ sdadel_max = specs->vddat_max - setup->rise_time -
+ af_delay_max - (i2c_dev->dnf + 4) * i2cclk;
+
+ scldel_min = setup->rise_time + specs->sudat_min;
+
+ if (sdadel_min < 0)
+ sdadel_min = 0;
+ if (sdadel_max < 0)
+ sdadel_max = 0;
+
+ dev_dbg(i2c_dev->dev, "SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n",
+ sdadel_min, sdadel_max, scldel_min);
+
+ INIT_LIST_HEAD(&solutions);
+ /* Compute possible values for PRESC, SCLDEL and SDADEL */
+ for (p = 0; p < STM32F7_PRESC_MAX; p++) {
+ for (l = 0; l < STM32F7_SCLDEL_MAX; l++) {
+ u32 scldel = (l + 1) * (p + 1) * i2cclk;
+
+ if (scldel < scldel_min)
+ continue;
+
+ for (a = 0; a < STM32F7_SDADEL_MAX; a++) {
+ u32 sdadel = (a * (p + 1) + 1) * i2cclk;
+
+ if (((sdadel >= sdadel_min) &&
+ (sdadel <= sdadel_max)) &&
+ (p != p_prev)) {
+ v = kmalloc(sizeof(*v), GFP_KERNEL);
+ if (!v) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ v->presc = p;
+ v->scldel = l;
+ v->sdadel = a;
+ p_prev = p;
+
+ list_add_tail(&v->node,
+ &solutions);
+ break;
+ }
+ }
+
+ if (p_prev == p)
+ break;
+ }
+ }
+
+ if (list_empty(&solutions)) {
+ dev_err(i2c_dev->dev, "no Prescaler solution\n");
+ ret = -EPERM;
+ goto exit;
+ }
+
+ tsync = af_delay_min + dnf_delay + (2 * i2cclk);
+ s = NULL;
+ clk_max = NSEC_PER_SEC / RATE_MIN(setup->speed_freq);
+ clk_min = NSEC_PER_SEC / setup->speed_freq;
+
+ /*
+ * Among Prescaler possibilities discovered above figures out SCL Low
+ * and High Period. Provided:
+ * - SCL Low Period has to be higher than SCL Clock Low Period
+ * defined by I2C Specification. I2C Clock has to be lower than
+ * (SCL Low Period - Analog/Digital filters) / 4.
+ * - SCL High Period has to be lower than SCL Clock High Period
+ * defined by I2C Specification
+ * - I2C Clock has to be lower than SCL High Period
+ */
+ list_for_each_entry(v, &solutions, node) {
+ u32 prescaler = (v->presc + 1) * i2cclk;
+
+ for (l = 0; l < STM32F7_SCLL_MAX; l++) {
+ u32 tscl_l = (l + 1) * prescaler + tsync;
+
+ if ((tscl_l < specs->l_min) ||
+ (i2cclk >=
+ ((tscl_l - af_delay_min - dnf_delay) / 4))) {
+ continue;
+ }
+
+ for (h = 0; h < STM32F7_SCLH_MAX; h++) {
+ u32 tscl_h = (h + 1) * prescaler + tsync;
+ u32 tscl = tscl_l + tscl_h +
+ setup->rise_time + setup->fall_time;
+
+ if ((tscl >= clk_min) && (tscl <= clk_max) &&
+ (tscl_h >= specs->h_min) &&
+ (i2cclk < tscl_h)) {
+ int clk_error = tscl - i2cbus;
+
+ if (clk_error < 0)
+ clk_error = -clk_error;
+
+ if (clk_error < clk_error_prev) {
+ clk_error_prev = clk_error;
+ v->scll = l;
+ v->sclh = h;
+ s = v;
+ }
+ }
+ }
+ }
+ }
+
+ if (!s) {
+ dev_err(i2c_dev->dev, "no solution at all\n");
+ ret = -EPERM;
+ goto exit;
+ }
+
+ output->presc = s->presc;
+ output->scldel = s->scldel;
+ output->sdadel = s->sdadel;
+ output->scll = s->scll;
+ output->sclh = s->sclh;
+
+ dev_dbg(i2c_dev->dev,
+ "Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n",
+ output->presc,
+ output->scldel, output->sdadel,
+ output->scll, output->sclh);
+
+exit:
+ /* Release list and memory */
+ list_for_each_entry_safe(v, _v, &solutions, node) {
+ list_del(&v->node);
+ kfree(v);
+ }
+
+ return ret;
+}
+
+static u32 stm32f7_get_lower_rate(u32 rate)
+{
+ int i = ARRAY_SIZE(stm32f7_i2c_specs);
+
+ while (--i)
+ if (stm32f7_i2c_specs[i].rate < rate)
+ break;
+
+ return stm32f7_i2c_specs[i].rate;
+}
+
+static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
+ struct stm32f7_i2c_setup *setup)
+{
+ struct i2c_timings timings, *t = &timings;
+ int ret = 0;
+
+ t->bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+ t->scl_rise_ns = i2c_dev->setup.rise_time;
+ t->scl_fall_ns = i2c_dev->setup.fall_time;
+
+ i2c_parse_fw_timings(i2c_dev->dev, t, false);
+
+ if (t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) {
+ dev_err(i2c_dev->dev, "Invalid bus speed (%i>%i)\n",
+ t->bus_freq_hz, I2C_MAX_FAST_MODE_PLUS_FREQ);
+ return -EINVAL;
+ }
+
+ setup->speed_freq = t->bus_freq_hz;
+ i2c_dev->setup.rise_time = t->scl_rise_ns;
+ i2c_dev->setup.fall_time = t->scl_fall_ns;
+ i2c_dev->dnf_dt = t->digital_filter_width_ns;
+ setup->clock_src = clk_get_rate(i2c_dev->clk);
+
+ if (!setup->clock_src) {
+ dev_err(i2c_dev->dev, "clock rate is 0\n");
+ return -EINVAL;
+ }
+
+ if (!of_property_read_bool(i2c_dev->dev->of_node, "i2c-digital-filter"))
+ i2c_dev->dnf_dt = STM32F7_I2C_DNF_DEFAULT;
+
+ do {
+ ret = stm32f7_i2c_compute_timing(i2c_dev, setup,
+ &i2c_dev->timing);
+ if (ret) {
+ dev_err(i2c_dev->dev,
+ "failed to compute I2C timings.\n");
+ if (setup->speed_freq <= I2C_MAX_STANDARD_MODE_FREQ)
+ break;
+ setup->speed_freq =
+ stm32f7_get_lower_rate(setup->speed_freq);
+ dev_warn(i2c_dev->dev,
+ "downgrade I2C Speed Freq to (%i)\n",
+ setup->speed_freq);
+ }
+ } while (ret);
+
+ if (ret) {
+ dev_err(i2c_dev->dev, "Impossible to compute I2C timings.\n");
+ return ret;
+ }
+
+ i2c_dev->analog_filter = of_property_read_bool(i2c_dev->dev->of_node,
+ "i2c-analog-filter");
+
+ dev_dbg(i2c_dev->dev, "I2C Speed(%i), Clk Source(%i)\n",
+ setup->speed_freq, setup->clock_src);
+ dev_dbg(i2c_dev->dev, "I2C Rise(%i) and Fall(%i) Time\n",
+ setup->rise_time, setup->fall_time);
+ dev_dbg(i2c_dev->dev, "I2C Analog Filter(%s), DNF(%i)\n",
+ (i2c_dev->analog_filter ? "On" : "Off"), i2c_dev->dnf);
+
+ i2c_dev->bus_rate = setup->speed_freq;
+
+ return 0;
+}
+
+static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+ u32 mask = STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN;
+
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+}
+
+static void stm32f7_i2c_dma_callback(void *arg)
+{
+ struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ struct device *dev = dma->chan_using->device->dev;
+
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dma_unmap_single(dev, dma->dma_buf, dma->dma_len, dma->dma_data_dir);
+ complete(&dma->dma_complete);
+}
+
+static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_timings *t = &i2c_dev->timing;
+ u32 timing = 0;
+
+ /* Timing settings */
+ timing |= STM32F7_I2C_TIMINGR_PRESC(t->presc);
+ timing |= STM32F7_I2C_TIMINGR_SCLDEL(t->scldel);
+ timing |= STM32F7_I2C_TIMINGR_SDADEL(t->sdadel);
+ timing |= STM32F7_I2C_TIMINGR_SCLH(t->sclh);
+ timing |= STM32F7_I2C_TIMINGR_SCLL(t->scll);
+ writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR);
+
+ /* Configure the Analog Filter */
+ if (i2c_dev->analog_filter)
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_ANFOFF);
+ else
+ stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_ANFOFF);
+
+ /* Program the Digital Filter */
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_DNF_MASK);
+ stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_DNF(i2c_dev->dnf));
+
+ stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_PE);
+}
+
+static void stm32f7_i2c_write_tx_data(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ void __iomem *base = i2c_dev->base;
+
+ if (f7_msg->count) {
+ writeb_relaxed(*f7_msg->buf++, base + STM32F7_I2C_TXDR);
+ f7_msg->count--;
+ }
+}
+
+static void stm32f7_i2c_read_rx_data(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ void __iomem *base = i2c_dev->base;
+
+ if (f7_msg->count) {
+ *f7_msg->buf++ = readb_relaxed(base + STM32F7_I2C_RXDR);
+ f7_msg->count--;
+ } else {
+ /* Flush RX buffer has no data is expected */
+ readb_relaxed(base + STM32F7_I2C_RXDR);
+ }
+}
+
+static void stm32f7_i2c_reload(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ u32 cr2;
+
+ if (i2c_dev->use_dma)
+ f7_msg->count -= STM32F7_I2C_MAX_LEN;
+
+ cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+
+ cr2 &= ~STM32F7_I2C_CR2_NBYTES_MASK;
+ if (f7_msg->count > STM32F7_I2C_MAX_LEN) {
+ cr2 |= STM32F7_I2C_CR2_NBYTES(STM32F7_I2C_MAX_LEN);
+ } else {
+ cr2 &= ~STM32F7_I2C_CR2_RELOAD;
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+ }
+
+ writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+}
+
+static void stm32f7_i2c_smbus_reload(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ u32 cr2;
+ u8 *val;
+
+ /*
+ * For I2C_SMBUS_BLOCK_DATA && I2C_SMBUS_BLOCK_PROC_CALL, the first
+ * data received inform us how many data will follow.
+ */
+ stm32f7_i2c_read_rx_data(i2c_dev);
+
+ /*
+ * Update NBYTES with the value read to continue the transfer
+ */
+ val = f7_msg->buf - sizeof(u8);
+ f7_msg->count = *val;
+ cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+ writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+}
+
+static void stm32f7_i2c_release_bus(struct i2c_adapter *i2c_adap)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_PE);
+
+ stm32f7_i2c_hw_config(i2c_dev);
+}
+
+static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev)
+{
+ u32 status;
+ int ret;
+
+ ret = readl_relaxed_poll_timeout(i2c_dev->base + STM32F7_I2C_ISR,
+ status,
+ !(status & STM32F7_I2C_ISR_BUSY),
+ 10, 1000);
+ if (!ret)
+ return 0;
+
+ stm32f7_i2c_release_bus(&i2c_dev->adap);
+
+ return -EBUSY;
+}
+
+static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
+ struct i2c_msg *msg)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ void __iomem *base = i2c_dev->base;
+ u32 cr1, cr2;
+ int ret;
+
+ f7_msg->addr = msg->addr;
+ f7_msg->buf = msg->buf;
+ f7_msg->count = msg->len;
+ f7_msg->result = 0;
+ f7_msg->stop = (i2c_dev->msg_id >= i2c_dev->msg_num - 1);
+
+ reinit_completion(&i2c_dev->complete);
+
+ cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+ cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+
+ /* Set transfer direction */
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ if (msg->flags & I2C_M_RD)
+ cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+ /* Set slave address */
+ cr2 &= ~(STM32F7_I2C_CR2_HEAD10R | STM32F7_I2C_CR2_ADD10);
+ if (msg->flags & I2C_M_TEN) {
+ cr2 &= ~STM32F7_I2C_CR2_SADD10_MASK;
+ cr2 |= STM32F7_I2C_CR2_SADD10(f7_msg->addr);
+ cr2 |= STM32F7_I2C_CR2_ADD10;
+ } else {
+ cr2 &= ~STM32F7_I2C_CR2_SADD7_MASK;
+ cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+ }
+
+ /* Set nb bytes to transfer and reload if needed */
+ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+ if (f7_msg->count > STM32F7_I2C_MAX_LEN) {
+ cr2 |= STM32F7_I2C_CR2_NBYTES(STM32F7_I2C_MAX_LEN);
+ cr2 |= STM32F7_I2C_CR2_RELOAD;
+ } else {
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+ }
+
+ /* Enable NACK, STOP, error and transfer complete interrupts */
+ cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE |
+ STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE;
+
+ /* Clear DMA req and TX/RX interrupt */
+ cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+ STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+ /* Configure DMA or enable RX/TX interrupt */
+ i2c_dev->use_dma = false;
+ if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+ ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+ msg->flags & I2C_M_RD,
+ f7_msg->count, f7_msg->buf,
+ stm32f7_i2c_dma_callback,
+ i2c_dev);
+ if (!ret)
+ i2c_dev->use_dma = true;
+ else
+ dev_warn(i2c_dev->dev, "can't use DMA\n");
+ }
+
+ if (!i2c_dev->use_dma) {
+ if (msg->flags & I2C_M_RD)
+ cr1 |= STM32F7_I2C_CR1_RXIE;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXIE;
+ } else {
+ if (msg->flags & I2C_M_RD)
+ cr1 |= STM32F7_I2C_CR1_RXDMAEN;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXDMAEN;
+ }
+
+ /* Configure Start/Repeated Start */
+ cr2 |= STM32F7_I2C_CR2_START;
+
+ i2c_dev->master_mode = true;
+
+ /* Write configurations registers */
+ writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+ writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+}
+
+static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
+ unsigned short flags, u8 command,
+ union i2c_smbus_data *data)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct device *dev = i2c_dev->dev;
+ void __iomem *base = i2c_dev->base;
+ u32 cr1, cr2;
+ int i, ret;
+
+ f7_msg->result = 0;
+ reinit_completion(&i2c_dev->complete);
+
+ cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+ cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+
+ /* Set transfer direction */
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ if (f7_msg->read_write)
+ cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+ /* Set slave address */
+ cr2 &= ~(STM32F7_I2C_CR2_ADD10 | STM32F7_I2C_CR2_SADD7_MASK);
+ cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+
+ f7_msg->smbus_buf[0] = command;
+ switch (f7_msg->size) {
+ case I2C_SMBUS_QUICK:
+ f7_msg->stop = true;
+ f7_msg->count = 0;
+ break;
+ case I2C_SMBUS_BYTE:
+ f7_msg->stop = true;
+ f7_msg->count = 1;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (f7_msg->read_write) {
+ f7_msg->stop = false;
+ f7_msg->count = 1;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ } else {
+ f7_msg->stop = true;
+ f7_msg->count = 2;
+ f7_msg->smbus_buf[1] = data->byte;
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (f7_msg->read_write) {
+ f7_msg->stop = false;
+ f7_msg->count = 1;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ } else {
+ f7_msg->stop = true;
+ f7_msg->count = 3;
+ f7_msg->smbus_buf[1] = data->word & 0xff;
+ f7_msg->smbus_buf[2] = data->word >> 8;
+ }
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (f7_msg->read_write) {
+ f7_msg->stop = false;
+ f7_msg->count = 1;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ } else {
+ f7_msg->stop = true;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX ||
+ !data->block[0]) {
+ dev_err(dev, "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ f7_msg->count = data->block[0] + 2;
+ for (i = 1; i < f7_msg->count; i++)
+ f7_msg->smbus_buf[i] = data->block[i - 1];
+ }
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ f7_msg->stop = false;
+ f7_msg->count = 3;
+ f7_msg->smbus_buf[1] = data->word & 0xff;
+ f7_msg->smbus_buf[2] = data->word >> 8;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ f7_msg->read_write = I2C_SMBUS_READ;
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ f7_msg->stop = false;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX - 1) {
+ dev_err(dev, "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ f7_msg->count = data->block[0] + 2;
+ for (i = 1; i < f7_msg->count; i++)
+ f7_msg->smbus_buf[i] = data->block[i - 1];
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ f7_msg->read_write = I2C_SMBUS_READ;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ /* Rely on emulated i2c transfer (through master_xfer) */
+ return -EOPNOTSUPP;
+ default:
+ dev_err(dev, "Unsupported smbus protocol %d\n", f7_msg->size);
+ return -EOPNOTSUPP;
+ }
+
+ f7_msg->buf = f7_msg->smbus_buf;
+
+ /* Configure PEC */
+ if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) {
+ cr1 |= STM32F7_I2C_CR1_PECEN;
+ if (!f7_msg->read_write) {
+ cr2 |= STM32F7_I2C_CR2_PECBYTE;
+ f7_msg->count++;
+ }
+ } else {
+ cr1 &= ~STM32F7_I2C_CR1_PECEN;
+ cr2 &= ~STM32F7_I2C_CR2_PECBYTE;
+ }
+
+ /* Set number of bytes to be transferred */
+ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+
+ /* Enable NACK, STOP, error and transfer complete interrupts */
+ cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE |
+ STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE;
+
+ /* Clear DMA req and TX/RX interrupt */
+ cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+ STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+ /* Configure DMA or enable RX/TX interrupt */
+ i2c_dev->use_dma = false;
+ if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+ ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+ cr2 & STM32F7_I2C_CR2_RD_WRN,
+ f7_msg->count, f7_msg->buf,
+ stm32f7_i2c_dma_callback,
+ i2c_dev);
+ if (!ret)
+ i2c_dev->use_dma = true;
+ else
+ dev_warn(i2c_dev->dev, "can't use DMA\n");
+ }
+
+ if (!i2c_dev->use_dma) {
+ if (cr2 & STM32F7_I2C_CR2_RD_WRN)
+ cr1 |= STM32F7_I2C_CR1_RXIE;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXIE;
+ } else {
+ if (cr2 & STM32F7_I2C_CR2_RD_WRN)
+ cr1 |= STM32F7_I2C_CR1_RXDMAEN;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXDMAEN;
+ }
+
+ /* Set Start bit */
+ cr2 |= STM32F7_I2C_CR2_START;
+
+ i2c_dev->master_mode = true;
+
+ /* Write configurations registers */
+ writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+ writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+
+ return 0;
+}
+
+static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ void __iomem *base = i2c_dev->base;
+ u32 cr1, cr2;
+ int ret;
+
+ cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+ cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+
+ /* Set transfer direction */
+ cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+ switch (f7_msg->size) {
+ case I2C_SMBUS_BYTE_DATA:
+ f7_msg->count = 1;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ f7_msg->count = 2;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ f7_msg->count = 1;
+ cr2 |= STM32F7_I2C_CR2_RELOAD;
+ break;
+ }
+
+ f7_msg->buf = f7_msg->smbus_buf;
+ f7_msg->stop = true;
+
+ /* Add one byte for PEC if needed */
+ if (cr1 & STM32F7_I2C_CR1_PECEN) {
+ cr2 |= STM32F7_I2C_CR2_PECBYTE;
+ f7_msg->count++;
+ }
+
+ /* Set number of bytes to be transferred */
+ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+
+ /*
+ * Configure RX/TX interrupt:
+ */
+ cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE);
+ cr1 |= STM32F7_I2C_CR1_RXIE;
+
+ /*
+ * Configure DMA or enable RX/TX interrupt:
+ * For I2C_SMBUS_BLOCK_DATA and I2C_SMBUS_BLOCK_PROC_CALL we don't use
+ * dma as we don't know in advance how many data will be received
+ */
+ cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+ STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+ i2c_dev->use_dma = false;
+ if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN &&
+ f7_msg->size != I2C_SMBUS_BLOCK_DATA &&
+ f7_msg->size != I2C_SMBUS_BLOCK_PROC_CALL) {
+ ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+ cr2 & STM32F7_I2C_CR2_RD_WRN,
+ f7_msg->count, f7_msg->buf,
+ stm32f7_i2c_dma_callback,
+ i2c_dev);
+
+ if (!ret)
+ i2c_dev->use_dma = true;
+ else
+ dev_warn(i2c_dev->dev, "can't use DMA\n");
+ }
+
+ if (!i2c_dev->use_dma)
+ cr1 |= STM32F7_I2C_CR1_RXIE;
+ else
+ cr1 |= STM32F7_I2C_CR1_RXDMAEN;
+
+ /* Configure Repeated Start */
+ cr2 |= STM32F7_I2C_CR2_START;
+
+ /* Write configurations registers */
+ writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+ writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+}
+
+static int stm32f7_i2c_smbus_check_pec(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ u8 count, internal_pec, received_pec;
+
+ internal_pec = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR);
+
+ switch (f7_msg->size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ received_pec = f7_msg->smbus_buf[1];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ received_pec = f7_msg->smbus_buf[2];
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ count = f7_msg->smbus_buf[0];
+ received_pec = f7_msg->smbus_buf[count];
+ break;
+ default:
+ dev_err(i2c_dev->dev, "Unsupported smbus protocol for PEC\n");
+ return -EINVAL;
+ }
+
+ if (internal_pec != received_pec) {
+ dev_err(i2c_dev->dev, "Bad PEC 0x%02x vs. 0x%02x\n",
+ internal_pec, received_pec);
+ return -EBADMSG;
+ }
+
+ return 0;
+}
+
+static bool stm32f7_i2c_is_addr_match(struct i2c_client *slave, u32 addcode)
+{
+ u32 addr;
+
+ if (!slave)
+ return false;
+
+ if (slave->flags & I2C_CLIENT_TEN) {
+ /*
+ * For 10-bit addr, addcode = 11110XY with
+ * X = Bit 9 of slave address
+ * Y = Bit 8 of slave address
+ */
+ addr = slave->addr >> 8;
+ addr |= 0x78;
+ if (addr == addcode)
+ return true;
+ } else {
+ addr = slave->addr & 0x7f;
+ if (addr == addcode)
+ return true;
+ }
+
+ return false;
+}
+
+static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct i2c_client *slave = i2c_dev->slave_running;
+ void __iomem *base = i2c_dev->base;
+ u32 mask;
+ u8 value = 0;
+
+ if (i2c_dev->slave_dir) {
+ /* Notify i2c slave that new read transfer is starting */
+ i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+
+ /*
+ * Disable slave TX config in case of I2C combined message
+ * (I2C Write followed by I2C Read)
+ */
+ mask = STM32F7_I2C_CR2_RELOAD;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, mask);
+ mask = STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE |
+ STM32F7_I2C_CR1_TCIE;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+
+ /* Enable TX empty, STOP, NACK interrupts */
+ mask = STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE |
+ STM32F7_I2C_CR1_TXIE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+
+ /* Write 1st data byte */
+ writel_relaxed(value, base + STM32F7_I2C_TXDR);
+ } else {
+ /* Notify i2c slave that new write transfer is starting */
+ i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+ /* Set reload mode to be able to ACK/NACK each received byte */
+ mask = STM32F7_I2C_CR2_RELOAD;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+
+ /*
+ * Set STOP, NACK, RX empty and transfer complete interrupts.*
+ * Set Slave Byte Control to be able to ACK/NACK each data
+ * byte received
+ */
+ mask = STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE |
+ STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE |
+ STM32F7_I2C_CR1_TCIE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+ }
+}
+
+static void stm32f7_i2c_slave_addr(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+ u32 isr, addcode, dir, mask;
+ int i;
+
+ isr = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+ addcode = STM32F7_I2C_ISR_ADDCODE_GET(isr);
+ dir = isr & STM32F7_I2C_ISR_DIR;
+
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (stm32f7_i2c_is_addr_match(i2c_dev->slave[i], addcode)) {
+ i2c_dev->slave_running = i2c_dev->slave[i];
+ i2c_dev->slave_dir = dir;
+
+ /* Start I2C slave processing */
+ stm32f7_i2c_slave_start(i2c_dev);
+
+ /* Clear ADDR flag */
+ mask = STM32F7_I2C_ICR_ADDRCF;
+ writel_relaxed(mask, base + STM32F7_I2C_ICR);
+ break;
+ }
+ }
+}
+
+static int stm32f7_i2c_get_slave_id(struct stm32f7_i2c_dev *i2c_dev,
+ struct i2c_client *slave, int *id)
+{
+ int i;
+
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (i2c_dev->slave[i] == slave) {
+ *id = i;
+ return 0;
+ }
+ }
+
+ dev_err(i2c_dev->dev, "Slave 0x%x not registered\n", slave->addr);
+
+ return -ENODEV;
+}
+
+static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
+ struct i2c_client *slave, int *id)
+{
+ struct device *dev = i2c_dev->dev;
+ int i;
+
+ /*
+ * slave[STM32F7_SLAVE_HOSTNOTIFY] support only SMBus Host address (0x8)
+ * slave[STM32F7_SLAVE_7_10_BITS_ADDR] supports 7-bit and 10-bit slave address
+ * slave[STM32F7_SLAVE_7_BITS_ADDR] supports 7-bit slave address only
+ */
+ if (i2c_dev->smbus_mode && (slave->addr == 0x08)) {
+ if (i2c_dev->slave[STM32F7_SLAVE_HOSTNOTIFY])
+ goto fail;
+ *id = STM32F7_SLAVE_HOSTNOTIFY;
+ return 0;
+ }
+
+ for (i = STM32F7_I2C_MAX_SLAVE - 1; i > STM32F7_SLAVE_HOSTNOTIFY; i--) {
+ if ((i == STM32F7_SLAVE_7_BITS_ADDR) &&
+ (slave->flags & I2C_CLIENT_TEN))
+ continue;
+ if (!i2c_dev->slave[i]) {
+ *id = i;
+ return 0;
+ }
+ }
+
+fail:
+ dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr);
+
+ return -EINVAL;
+}
+
+static bool stm32f7_i2c_is_slave_registered(struct stm32f7_i2c_dev *i2c_dev)
+{
+ int i;
+
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (i2c_dev->slave[i])
+ return true;
+ }
+
+ return false;
+}
+
+static bool stm32f7_i2c_is_slave_busy(struct stm32f7_i2c_dev *i2c_dev)
+{
+ int i, busy;
+
+ busy = 0;
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (i2c_dev->slave[i])
+ busy++;
+ }
+
+ return i == busy;
+}
+
+static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+ u32 cr2, status, mask;
+ u8 val;
+ int ret;
+
+ status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+ /* Slave transmitter mode */
+ if (status & STM32F7_I2C_ISR_TXIS) {
+ i2c_slave_event(i2c_dev->slave_running,
+ I2C_SLAVE_READ_PROCESSED,
+ &val);
+
+ /* Write data byte */
+ writel_relaxed(val, base + STM32F7_I2C_TXDR);
+ }
+
+ /* Transfer Complete Reload for Slave receiver mode */
+ if (status & STM32F7_I2C_ISR_TCR || status & STM32F7_I2C_ISR_RXNE) {
+ /*
+ * Read data byte then set NBYTES to receive next byte or NACK
+ * the current received byte
+ */
+ val = readb_relaxed(i2c_dev->base + STM32F7_I2C_RXDR);
+ ret = i2c_slave_event(i2c_dev->slave_running,
+ I2C_SLAVE_WRITE_RECEIVED,
+ &val);
+ if (!ret) {
+ cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(1);
+ writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+ } else {
+ mask = STM32F7_I2C_CR2_NACK;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+ }
+ }
+
+ /* NACK received */
+ if (status & STM32F7_I2C_ISR_NACKF) {
+ dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__);
+ writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
+ }
+
+ /* STOP received */
+ if (status & STM32F7_I2C_ISR_STOPF) {
+ /* Disable interrupts */
+ stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_XFER_IRQ_MASK);
+
+ if (i2c_dev->slave_dir) {
+ /*
+ * Flush TX buffer in order to not used the byte in
+ * TXDR for the next transfer
+ */
+ mask = STM32F7_I2C_ISR_TXE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_ISR, mask);
+ }
+
+ /* Clear STOP flag */
+ writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
+
+ /* Notify i2c slave that a STOP flag has been detected */
+ i2c_slave_event(i2c_dev->slave_running, I2C_SLAVE_STOP, &val);
+
+ i2c_dev->slave_running = NULL;
+ }
+
+ /* Address match received */
+ if (status & STM32F7_I2C_ISR_ADDR)
+ stm32f7_i2c_slave_addr(i2c_dev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
+{
+ struct stm32f7_i2c_dev *i2c_dev = data;
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ void __iomem *base = i2c_dev->base;
+ u32 status, mask;
+ int ret = IRQ_HANDLED;
+
+ /* Check if the interrupt if for a slave device */
+ if (!i2c_dev->master_mode) {
+ ret = stm32f7_i2c_slave_isr_event(i2c_dev);
+ return ret;
+ }
+
+ status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+ /* Tx empty */
+ if (status & STM32F7_I2C_ISR_TXIS)
+ stm32f7_i2c_write_tx_data(i2c_dev);
+
+ /* RX not empty */
+ if (status & STM32F7_I2C_ISR_RXNE)
+ stm32f7_i2c_read_rx_data(i2c_dev);
+
+ /* NACK received */
+ if (status & STM32F7_I2C_ISR_NACKF) {
+ dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
+ __func__, f7_msg->addr);
+ writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
+ if (i2c_dev->use_dma) {
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
+ }
+ f7_msg->result = -ENXIO;
+ }
+
+ /* STOP detection flag */
+ if (status & STM32F7_I2C_ISR_STOPF) {
+ /* Disable interrupts */
+ if (stm32f7_i2c_is_slave_registered(i2c_dev))
+ mask = STM32F7_I2C_XFER_IRQ_MASK;
+ else
+ mask = STM32F7_I2C_ALL_IRQ_MASK;
+ stm32f7_i2c_disable_irq(i2c_dev, mask);
+
+ /* Clear STOP flag */
+ writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
+
+ if (i2c_dev->use_dma && !f7_msg->result) {
+ ret = IRQ_WAKE_THREAD;
+ } else {
+ i2c_dev->master_mode = false;
+ complete(&i2c_dev->complete);
+ }
+ }
+
+ /* Transfer complete */
+ if (status & STM32F7_I2C_ISR_TC) {
+ if (f7_msg->stop) {
+ mask = STM32F7_I2C_CR2_STOP;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+ } else if (i2c_dev->use_dma && !f7_msg->result) {
+ ret = IRQ_WAKE_THREAD;
+ } else if (f7_msg->smbus) {
+ stm32f7_i2c_smbus_rep_start(i2c_dev);
+ } else {
+ i2c_dev->msg_id++;
+ i2c_dev->msg++;
+ stm32f7_i2c_xfer_msg(i2c_dev, i2c_dev->msg);
+ }
+ }
+
+ if (status & STM32F7_I2C_ISR_TCR) {
+ if (f7_msg->smbus)
+ stm32f7_i2c_smbus_reload(i2c_dev);
+ else
+ stm32f7_i2c_reload(i2c_dev);
+ }
+
+ return ret;
+}
+
+static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
+{
+ struct stm32f7_i2c_dev *i2c_dev = data;
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ u32 status;
+ int ret;
+
+ /*
+ * Wait for dma transfer completion before sending next message or
+ * notity the end of xfer to the client
+ */
+ ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
+ if (!ret) {
+ dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
+ f7_msg->result = -ETIMEDOUT;
+ }
+
+ status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+ if (status & STM32F7_I2C_ISR_TC) {
+ if (f7_msg->smbus) {
+ stm32f7_i2c_smbus_rep_start(i2c_dev);
+ } else {
+ i2c_dev->msg_id++;
+ i2c_dev->msg++;
+ stm32f7_i2c_xfer_msg(i2c_dev, i2c_dev->msg);
+ }
+ } else {
+ i2c_dev->master_mode = false;
+ complete(&i2c_dev->complete);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
+{
+ struct stm32f7_i2c_dev *i2c_dev = data;
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ void __iomem *base = i2c_dev->base;
+ struct device *dev = i2c_dev->dev;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ u32 status;
+
+ status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+ /* Bus error */
+ if (status & STM32F7_I2C_ISR_BERR) {
+ dev_err(dev, "<%s>: Bus error accessing addr 0x%x\n",
+ __func__, f7_msg->addr);
+ writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
+ stm32f7_i2c_release_bus(&i2c_dev->adap);
+ f7_msg->result = -EIO;
+ }
+
+ /* Arbitration loss */
+ if (status & STM32F7_I2C_ISR_ARLO) {
+ dev_dbg(dev, "<%s>: Arbitration loss accessing addr 0x%x\n",
+ __func__, f7_msg->addr);
+ writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR);
+ f7_msg->result = -EAGAIN;
+ }
+
+ if (status & STM32F7_I2C_ISR_PECERR) {
+ dev_err(dev, "<%s>: PEC error in reception accessing addr 0x%x\n",
+ __func__, f7_msg->addr);
+ writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR);
+ f7_msg->result = -EINVAL;
+ }
+
+ if (status & STM32F7_I2C_ISR_ALERT) {
+ dev_dbg(dev, "<%s>: SMBus alert received\n", __func__);
+ writel_relaxed(STM32F7_I2C_ICR_ALERTCF, base + STM32F7_I2C_ICR);
+ i2c_handle_smbus_alert(i2c_dev->alert->ara);
+ return IRQ_HANDLED;
+ }
+
+ if (!i2c_dev->slave_running) {
+ u32 mask;
+ /* Disable interrupts */
+ if (stm32f7_i2c_is_slave_registered(i2c_dev))
+ mask = STM32F7_I2C_XFER_IRQ_MASK;
+ else
+ mask = STM32F7_I2C_ALL_IRQ_MASK;
+ stm32f7_i2c_disable_irq(i2c_dev, mask);
+ }
+
+ /* Disable dma */
+ if (i2c_dev->use_dma) {
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_async(dma->chan_using);
+ }
+
+ i2c_dev->master_mode = false;
+ complete(&i2c_dev->complete);
+
+ return IRQ_HANDLED;
+}
+
+static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ unsigned long time_left;
+ int ret;
+
+ i2c_dev->msg = msgs;
+ i2c_dev->msg_num = num;
+ i2c_dev->msg_id = 0;
+ f7_msg->smbus = false;
+
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = stm32f7_i2c_wait_free_bus(i2c_dev);
+ if (ret)
+ goto pm_free;
+
+ stm32f7_i2c_xfer_msg(i2c_dev, msgs);
+
+ time_left = wait_for_completion_timeout(&i2c_dev->complete,
+ i2c_dev->adap.timeout);
+ ret = f7_msg->result;
+ if (ret) {
+ if (i2c_dev->use_dma)
+ dmaengine_synchronize(dma->chan_using);
+
+ /*
+ * It is possible that some unsent data have already been
+ * written into TXDR. To avoid sending old data in a
+ * further transfer, flush TXDR in case of any error
+ */
+ writel_relaxed(STM32F7_I2C_ISR_TXE,
+ i2c_dev->base + STM32F7_I2C_ISR);
+ goto pm_free;
+ }
+
+ if (!time_left) {
+ dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
+ i2c_dev->msg->addr);
+ if (i2c_dev->use_dma)
+ dmaengine_terminate_sync(dma->chan_using);
+ stm32f7_i2c_wait_free_bus(i2c_dev);
+ ret = -ETIMEDOUT;
+ }
+
+pm_free:
+ pm_runtime_mark_last_busy(i2c_dev->dev);
+ pm_runtime_put_autosuspend(i2c_dev->dev);
+
+ return (ret < 0) ? ret : num;
+}
+
+static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adapter);
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ struct device *dev = i2c_dev->dev;
+ unsigned long timeout;
+ int i, ret;
+
+ f7_msg->addr = addr;
+ f7_msg->size = size;
+ f7_msg->read_write = read_write;
+ f7_msg->smbus = true;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ return ret;
+
+ ret = stm32f7_i2c_wait_free_bus(i2c_dev);
+ if (ret)
+ goto pm_free;
+
+ ret = stm32f7_i2c_smbus_xfer_msg(i2c_dev, flags, command, data);
+ if (ret)
+ goto pm_free;
+
+ timeout = wait_for_completion_timeout(&i2c_dev->complete,
+ i2c_dev->adap.timeout);
+ ret = f7_msg->result;
+ if (ret) {
+ if (i2c_dev->use_dma)
+ dmaengine_synchronize(dma->chan_using);
+
+ /*
+ * It is possible that some unsent data have already been
+ * written into TXDR. To avoid sending old data in a
+ * further transfer, flush TXDR in case of any error
+ */
+ writel_relaxed(STM32F7_I2C_ISR_TXE,
+ i2c_dev->base + STM32F7_I2C_ISR);
+ goto pm_free;
+ }
+
+ if (!timeout) {
+ dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
+ if (i2c_dev->use_dma)
+ dmaengine_terminate_sync(dma->chan_using);
+ stm32f7_i2c_wait_free_bus(i2c_dev);
+ ret = -ETIMEDOUT;
+ goto pm_free;
+ }
+
+ /* Check PEC */
+ if ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && read_write) {
+ ret = stm32f7_i2c_smbus_check_pec(i2c_dev);
+ if (ret)
+ goto pm_free;
+ }
+
+ if (read_write && size != I2C_SMBUS_QUICK) {
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = f7_msg->smbus_buf[0];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ data->word = f7_msg->smbus_buf[0] |
+ (f7_msg->smbus_buf[1] << 8);
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ for (i = 0; i <= f7_msg->smbus_buf[0]; i++)
+ data->block[i] = f7_msg->smbus_buf[i];
+ break;
+ default:
+ dev_err(dev, "Unsupported smbus transaction\n");
+ ret = -EINVAL;
+ }
+ }
+
+pm_free:
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+ return ret;
+}
+
+static void stm32f7_i2c_enable_wakeup(struct stm32f7_i2c_dev *i2c_dev,
+ bool enable)
+{
+ void __iomem *base = i2c_dev->base;
+ u32 mask = STM32F7_I2C_CR1_WUPEN;
+
+ if (!i2c_dev->wakeup_src)
+ return;
+
+ if (enable) {
+ device_set_wakeup_enable(i2c_dev->dev, true);
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+ } else {
+ device_set_wakeup_enable(i2c_dev->dev, false);
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+ }
+}
+
+static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter);
+ void __iomem *base = i2c_dev->base;
+ struct device *dev = i2c_dev->dev;
+ u32 oar1, oar2, mask;
+ int id, ret;
+
+ if (slave->flags & I2C_CLIENT_PEC) {
+ dev_err(dev, "SMBus PEC not supported in slave mode\n");
+ return -EINVAL;
+ }
+
+ if (stm32f7_i2c_is_slave_busy(i2c_dev)) {
+ dev_err(dev, "Too much slave registered\n");
+ return -EBUSY;
+ }
+
+ ret = stm32f7_i2c_get_free_slave_id(i2c_dev, slave, &id);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ return ret;
+
+ if (!stm32f7_i2c_is_slave_registered(i2c_dev))
+ stm32f7_i2c_enable_wakeup(i2c_dev, true);
+
+ switch (id) {
+ case 0:
+ /* Slave SMBus Host */
+ i2c_dev->slave[id] = slave;
+ break;
+
+ case 1:
+ /* Configure Own Address 1 */
+ oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
+ oar1 &= ~STM32F7_I2C_OAR1_MASK;
+ if (slave->flags & I2C_CLIENT_TEN) {
+ oar1 |= STM32F7_I2C_OAR1_OA1_10(slave->addr);
+ oar1 |= STM32F7_I2C_OAR1_OA1MODE;
+ } else {
+ oar1 |= STM32F7_I2C_OAR1_OA1_7(slave->addr);
+ }
+ oar1 |= STM32F7_I2C_OAR1_OA1EN;
+ i2c_dev->slave[id] = slave;
+ writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1);
+ break;
+
+ case 2:
+ /* Configure Own Address 2 */
+ oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
+ oar2 &= ~STM32F7_I2C_OAR2_MASK;
+ if (slave->flags & I2C_CLIENT_TEN) {
+ ret = -EOPNOTSUPP;
+ goto pm_free;
+ }
+
+ oar2 |= STM32F7_I2C_OAR2_OA2_7(slave->addr);
+ oar2 |= STM32F7_I2C_OAR2_OA2EN;
+ i2c_dev->slave[id] = slave;
+ writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2);
+ break;
+
+ default:
+ dev_err(dev, "I2C slave id not supported\n");
+ ret = -ENODEV;
+ goto pm_free;
+ }
+
+ /* Enable ACK */
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, STM32F7_I2C_CR2_NACK);
+
+ /* Enable Address match interrupt, error interrupt and enable I2C */
+ mask = STM32F7_I2C_CR1_ADDRIE | STM32F7_I2C_CR1_ERRIE |
+ STM32F7_I2C_CR1_PE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+
+ ret = 0;
+pm_free:
+ if (!stm32f7_i2c_is_slave_registered(i2c_dev))
+ stm32f7_i2c_enable_wakeup(i2c_dev, false);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
+}
+
+static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter);
+ void __iomem *base = i2c_dev->base;
+ u32 mask;
+ int id, ret;
+
+ ret = stm32f7_i2c_get_slave_id(i2c_dev, slave, &id);
+ if (ret)
+ return ret;
+
+ WARN_ON(!i2c_dev->slave[id]);
+
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ if (id == 1) {
+ mask = STM32F7_I2C_OAR1_OA1EN;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask);
+ } else if (id == 2) {
+ mask = STM32F7_I2C_OAR2_OA2EN;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask);
+ }
+
+ i2c_dev->slave[id] = NULL;
+
+ if (!stm32f7_i2c_is_slave_registered(i2c_dev)) {
+ stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+ stm32f7_i2c_enable_wakeup(i2c_dev, false);
+ }
+
+ pm_runtime_mark_last_busy(i2c_dev->dev);
+ pm_runtime_put_autosuspend(i2c_dev->dev);
+
+ return 0;
+}
+
+static int stm32f7_i2c_write_fm_plus_bits(struct stm32f7_i2c_dev *i2c_dev,
+ bool enable)
+{
+ int ret;
+
+ if (i2c_dev->bus_rate <= I2C_MAX_FAST_MODE_FREQ ||
+ IS_ERR_OR_NULL(i2c_dev->regmap))
+ /* Optional */
+ return 0;
+
+ if (i2c_dev->fmp_sreg == i2c_dev->fmp_creg)
+ ret = regmap_update_bits(i2c_dev->regmap,
+ i2c_dev->fmp_sreg,
+ i2c_dev->fmp_mask,
+ enable ? i2c_dev->fmp_mask : 0);
+ else
+ ret = regmap_write(i2c_dev->regmap,
+ enable ? i2c_dev->fmp_sreg :
+ i2c_dev->fmp_creg,
+ i2c_dev->fmp_mask);
+
+ return ret;
+}
+
+static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev,
+ struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp");
+ if (IS_ERR(i2c_dev->regmap))
+ /* Optional */
+ return 0;
+
+ ret = of_property_read_u32_index(np, "st,syscfg-fmp", 1,
+ &i2c_dev->fmp_sreg);
+ if (ret)
+ return ret;
+
+ i2c_dev->fmp_creg = i2c_dev->fmp_sreg +
+ i2c_dev->setup.fmp_clr_offset;
+
+ return of_property_read_u32_index(np, "st,syscfg-fmp", 2,
+ &i2c_dev->fmp_mask);
+}
+
+static int stm32f7_i2c_enable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct i2c_adapter *adap = &i2c_dev->adap;
+ void __iomem *base = i2c_dev->base;
+ struct i2c_client *client;
+
+ client = i2c_new_slave_host_notify_device(adap);
+ if (IS_ERR(client))
+ return PTR_ERR(client);
+
+ i2c_dev->host_notify_client = client;
+
+ /* Enable SMBus Host address */
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_SMBHEN);
+
+ return 0;
+}
+
+static void stm32f7_i2c_disable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+
+ if (i2c_dev->host_notify_client) {
+ /* Disable SMBus Host address */
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_SMBHEN);
+ i2c_free_slave_host_notify_device(i2c_dev->host_notify_client);
+ }
+}
+
+static int stm32f7_i2c_enable_smbus_alert(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_alert *alert;
+ struct i2c_adapter *adap = &i2c_dev->adap;
+ struct device *dev = i2c_dev->dev;
+ void __iomem *base = i2c_dev->base;
+
+ alert = devm_kzalloc(dev, sizeof(*alert), GFP_KERNEL);
+ if (!alert)
+ return -ENOMEM;
+
+ alert->ara = i2c_new_smbus_alert_device(adap, &alert->setup);
+ if (IS_ERR(alert->ara))
+ return PTR_ERR(alert->ara);
+
+ i2c_dev->alert = alert;
+
+ /* Enable SMBus Alert */
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_ALERTEN);
+
+ return 0;
+}
+
+static void stm32f7_i2c_disable_smbus_alert(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_alert *alert = i2c_dev->alert;
+ void __iomem *base = i2c_dev->base;
+
+ if (alert) {
+ /* Disable SMBus Alert */
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_ALERTEN);
+ i2c_unregister_device(alert->ara);
+ }
+}
+
+static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+
+ u32 func = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
+ I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+
+ if (i2c_dev->smbus_mode)
+ func |= I2C_FUNC_SMBUS_HOST_NOTIFY;
+
+ return func;
+}
+
+static const struct i2c_algorithm stm32f7_i2c_algo = {
+ .master_xfer = stm32f7_i2c_xfer,
+ .smbus_xfer = stm32f7_i2c_smbus_xfer,
+ .functionality = stm32f7_i2c_func,
+ .reg_slave = stm32f7_i2c_reg_slave,
+ .unreg_slave = stm32f7_i2c_unreg_slave,
+};
+
+static int stm32f7_i2c_probe(struct platform_device *pdev)
+{
+ struct stm32f7_i2c_dev *i2c_dev;
+ const struct stm32f7_i2c_setup *setup;
+ struct resource *res;
+ struct i2c_adapter *adap;
+ struct reset_control *rst;
+ dma_addr_t phy_addr;
+ int irq_error, irq_event, ret;
+
+ i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+ if (!i2c_dev)
+ return -ENOMEM;
+
+ i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(i2c_dev->base))
+ return PTR_ERR(i2c_dev->base);
+ phy_addr = (dma_addr_t)res->start;
+
+ irq_event = platform_get_irq(pdev, 0);
+ if (irq_event <= 0)
+ return irq_event ? : -ENOENT;
+
+ irq_error = platform_get_irq(pdev, 1);
+ if (irq_error <= 0)
+ return irq_error ? : -ENOENT;
+
+ i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node,
+ "wakeup-source");
+
+ i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(i2c_dev->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->clk),
+ "Failed to get controller clock\n");
+
+ ret = clk_prepare_enable(i2c_dev->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to prepare_enable clock\n");
+ return ret;
+ }
+
+ rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(rst)) {
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
+ "Error: Missing reset ctrl\n");
+ goto clk_free;
+ }
+ reset_control_assert(rst);
+ udelay(2);
+ reset_control_deassert(rst);
+
+ i2c_dev->dev = &pdev->dev;
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq_event,
+ stm32f7_i2c_isr_event,
+ stm32f7_i2c_isr_event_thread,
+ IRQF_ONESHOT,
+ pdev->name, i2c_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq event %i\n",
+ irq_event);
+ goto clk_free;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq_error, stm32f7_i2c_isr_error, 0,
+ pdev->name, i2c_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq error %i\n",
+ irq_error);
+ goto clk_free;
+ }
+
+ setup = of_device_get_match_data(&pdev->dev);
+ if (!setup) {
+ dev_err(&pdev->dev, "Can't get device data\n");
+ ret = -ENODEV;
+ goto clk_free;
+ }
+ i2c_dev->setup = *setup;
+
+ ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
+ if (ret)
+ goto clk_free;
+
+ /* Setup Fast mode plus if necessary */
+ if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) {
+ ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
+ if (ret)
+ goto clk_free;
+ ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
+ if (ret)
+ goto clk_free;
+ }
+
+ adap = &i2c_dev->adap;
+ i2c_set_adapdata(adap, i2c_dev);
+ snprintf(adap->name, sizeof(adap->name), "STM32F7 I2C(%pa)",
+ &res->start);
+ adap->owner = THIS_MODULE;
+ adap->timeout = 2 * HZ;
+ adap->retries = 3;
+ adap->algo = &stm32f7_i2c_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
+
+ init_completion(&i2c_dev->complete);
+
+ /* Init DMA config if supported */
+ i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
+ STM32F7_I2C_TXDR,
+ STM32F7_I2C_RXDR);
+ if (IS_ERR(i2c_dev->dma)) {
+ ret = PTR_ERR(i2c_dev->dma);
+ /* DMA support is optional, only report other errors */
+ if (ret != -ENODEV)
+ goto fmp_clear;
+ dev_dbg(i2c_dev->dev, "No DMA option: fallback using interrupts\n");
+ i2c_dev->dma = NULL;
+ }
+
+ if (i2c_dev->wakeup_src) {
+ device_set_wakeup_capable(i2c_dev->dev, true);
+
+ ret = dev_pm_set_wake_irq(i2c_dev->dev, irq_event);
+ if (ret) {
+ dev_err(i2c_dev->dev, "Failed to set wake up irq\n");
+ goto clr_wakeup_capable;
+ }
+ }
+
+ platform_set_drvdata(pdev, i2c_dev);
+
+ pm_runtime_set_autosuspend_delay(i2c_dev->dev,
+ STM32F7_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(i2c_dev->dev);
+ pm_runtime_set_active(i2c_dev->dev);
+ pm_runtime_enable(i2c_dev->dev);
+
+ pm_runtime_get_noresume(&pdev->dev);
+
+ stm32f7_i2c_hw_config(i2c_dev);
+
+ i2c_dev->smbus_mode = of_property_read_bool(pdev->dev.of_node, "smbus");
+
+ ret = i2c_add_adapter(adap);
+ if (ret)
+ goto pm_disable;
+
+ if (i2c_dev->smbus_mode) {
+ ret = stm32f7_i2c_enable_smbus_host(i2c_dev);
+ if (ret) {
+ dev_err(i2c_dev->dev,
+ "failed to enable SMBus Host-Notify protocol (%d)\n",
+ ret);
+ goto i2c_adapter_remove;
+ }
+ }
+
+ if (of_property_read_bool(pdev->dev.of_node, "smbus-alert")) {
+ ret = stm32f7_i2c_enable_smbus_alert(i2c_dev);
+ if (ret) {
+ dev_err(i2c_dev->dev,
+ "failed to enable SMBus alert protocol (%d)\n",
+ ret);
+ goto i2c_disable_smbus_host;
+ }
+ }
+
+ dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr);
+
+ pm_runtime_mark_last_busy(i2c_dev->dev);
+ pm_runtime_put_autosuspend(i2c_dev->dev);
+
+ return 0;
+
+i2c_disable_smbus_host:
+ stm32f7_i2c_disable_smbus_host(i2c_dev);
+
+i2c_adapter_remove:
+ i2c_del_adapter(adap);
+
+pm_disable:
+ pm_runtime_put_noidle(i2c_dev->dev);
+ pm_runtime_disable(i2c_dev->dev);
+ pm_runtime_set_suspended(i2c_dev->dev);
+ pm_runtime_dont_use_autosuspend(i2c_dev->dev);
+
+ if (i2c_dev->wakeup_src)
+ dev_pm_clear_wake_irq(i2c_dev->dev);
+
+clr_wakeup_capable:
+ if (i2c_dev->wakeup_src)
+ device_set_wakeup_capable(i2c_dev->dev, false);
+
+ if (i2c_dev->dma) {
+ stm32_i2c_dma_free(i2c_dev->dma);
+ i2c_dev->dma = NULL;
+ }
+
+fmp_clear:
+ stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
+
+clk_free:
+ clk_disable_unprepare(i2c_dev->clk);
+
+ return ret;
+}
+
+static int stm32f7_i2c_remove(struct platform_device *pdev)
+{
+ struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+ stm32f7_i2c_disable_smbus_alert(i2c_dev);
+ stm32f7_i2c_disable_smbus_host(i2c_dev);
+
+ i2c_del_adapter(&i2c_dev->adap);
+ pm_runtime_get_sync(i2c_dev->dev);
+
+ if (i2c_dev->wakeup_src) {
+ dev_pm_clear_wake_irq(i2c_dev->dev);
+ /*
+ * enforce that wakeup is disabled and that the device
+ * is marked as non wakeup capable
+ */
+ device_init_wakeup(i2c_dev->dev, false);
+ }
+
+ pm_runtime_put_noidle(i2c_dev->dev);
+ pm_runtime_disable(i2c_dev->dev);
+ pm_runtime_set_suspended(i2c_dev->dev);
+ pm_runtime_dont_use_autosuspend(i2c_dev->dev);
+
+ if (i2c_dev->dma) {
+ stm32_i2c_dma_free(i2c_dev->dma);
+ i2c_dev->dma = NULL;
+ }
+
+ stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
+
+ clk_disable_unprepare(i2c_dev->clk);
+
+ return 0;
+}
+
+static int __maybe_unused stm32f7_i2c_runtime_suspend(struct device *dev)
+{
+ struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+ if (!stm32f7_i2c_is_slave_registered(i2c_dev))
+ clk_disable_unprepare(i2c_dev->clk);
+
+ return 0;
+}
+
+static int __maybe_unused stm32f7_i2c_runtime_resume(struct device *dev)
+{
+ struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+ int ret;
+
+ if (!stm32f7_i2c_is_slave_registered(i2c_dev)) {
+ ret = clk_prepare_enable(i2c_dev->clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare_enable clock\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int __maybe_unused stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
+{
+ int ret;
+ struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
+
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ backup_regs->cr1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR1);
+ backup_regs->cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+ backup_regs->oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
+ backup_regs->oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
+ backup_regs->tmgr = readl_relaxed(i2c_dev->base + STM32F7_I2C_TIMINGR);
+ stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
+
+ pm_runtime_put_sync(i2c_dev->dev);
+
+ return ret;
+}
+
+static int __maybe_unused stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
+{
+ u32 cr1;
+ int ret;
+ struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
+
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ cr1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR1);
+ if (cr1 & STM32F7_I2C_CR1_PE)
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_PE);
+
+ writel_relaxed(backup_regs->tmgr, i2c_dev->base + STM32F7_I2C_TIMINGR);
+ writel_relaxed(backup_regs->cr1 & ~STM32F7_I2C_CR1_PE,
+ i2c_dev->base + STM32F7_I2C_CR1);
+ if (backup_regs->cr1 & STM32F7_I2C_CR1_PE)
+ stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_PE);
+ writel_relaxed(backup_regs->cr2, i2c_dev->base + STM32F7_I2C_CR2);
+ writel_relaxed(backup_regs->oar1, i2c_dev->base + STM32F7_I2C_OAR1);
+ writel_relaxed(backup_regs->oar2, i2c_dev->base + STM32F7_I2C_OAR2);
+ stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
+
+ pm_runtime_put_sync(i2c_dev->dev);
+
+ return ret;
+}
+
+static int __maybe_unused stm32f7_i2c_suspend(struct device *dev)
+{
+ struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+ int ret;
+
+ i2c_mark_adapter_suspended(&i2c_dev->adap);
+
+ if (!device_may_wakeup(dev) && !device_wakeup_path(dev)) {
+ ret = stm32f7_i2c_regs_backup(i2c_dev);
+ if (ret < 0) {
+ i2c_mark_adapter_resumed(&i2c_dev->adap);
+ return ret;
+ }
+
+ pinctrl_pm_select_sleep_state(dev);
+ pm_runtime_force_suspend(dev);
+ }
+
+ return 0;
+}
+
+static int __maybe_unused stm32f7_i2c_resume(struct device *dev)
+{
+ struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+ int ret;
+
+ if (!device_may_wakeup(dev) && !device_wakeup_path(dev)) {
+ ret = pm_runtime_force_resume(dev);
+ if (ret < 0)
+ return ret;
+ pinctrl_pm_select_default_state(dev);
+
+ ret = stm32f7_i2c_regs_restore(i2c_dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ i2c_mark_adapter_resumed(&i2c_dev->adap);
+
+ return 0;
+}
+
+static const struct dev_pm_ops stm32f7_i2c_pm_ops = {
+ SET_RUNTIME_PM_OPS(stm32f7_i2c_runtime_suspend,
+ stm32f7_i2c_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(stm32f7_i2c_suspend, stm32f7_i2c_resume)
+};
+
+static const struct of_device_id stm32f7_i2c_match[] = {
+ { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup},
+ { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup},
+ { .compatible = "st,stm32mp13-i2c", .data = &stm32mp13_setup},
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32f7_i2c_match);
+
+static struct platform_driver stm32f7_i2c_driver = {
+ .driver = {
+ .name = "stm32f7-i2c",
+ .of_match_table = stm32f7_i2c_match,
+ .pm = &stm32f7_i2c_pm_ops,
+ },
+ .probe = stm32f7_i2c_probe,
+ .remove = stm32f7_i2c_remove,
+};
+
+module_platform_driver(stm32f7_i2c_driver);
+
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32F7 I2C driver");
+MODULE_LICENSE("GPL v2");