diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/i2c/busses/i2c-synquacer.c | 659 |
1 files changed, 659 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c new file mode 100644 index 000000000..e4026c541 --- /dev/null +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -0,0 +1,659 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 FUJITSU SEMICONDUCTOR LIMITED + */ + +#include <linux/acpi.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define WAIT_PCLK(n, rate) \ + ndelay(DIV_ROUND_UP(DIV_ROUND_UP(1000000000, rate), n) + 10) + +/* I2C register address definitions */ +#define SYNQUACER_I2C_REG_BSR (0x00 << 2) // Bus Status +#define SYNQUACER_I2C_REG_BCR (0x01 << 2) // Bus Control +#define SYNQUACER_I2C_REG_CCR (0x02 << 2) // Clock Control +#define SYNQUACER_I2C_REG_ADR (0x03 << 2) // Address +#define SYNQUACER_I2C_REG_DAR (0x04 << 2) // Data +#define SYNQUACER_I2C_REG_CSR (0x05 << 2) // Expansion CS +#define SYNQUACER_I2C_REG_FSR (0x06 << 2) // Bus Clock Freq +#define SYNQUACER_I2C_REG_BC2R (0x07 << 2) // Bus Control 2 + +/* I2C register bit definitions */ +#define SYNQUACER_I2C_BSR_FBT BIT(0) // First Byte Transfer +#define SYNQUACER_I2C_BSR_GCA BIT(1) // General Call Address +#define SYNQUACER_I2C_BSR_AAS BIT(2) // Address as Slave +#define SYNQUACER_I2C_BSR_TRX BIT(3) // Transfer/Receive +#define SYNQUACER_I2C_BSR_LRB BIT(4) // Last Received Bit +#define SYNQUACER_I2C_BSR_AL BIT(5) // Arbitration Lost +#define SYNQUACER_I2C_BSR_RSC BIT(6) // Repeated Start Cond. +#define SYNQUACER_I2C_BSR_BB BIT(7) // Bus Busy + +#define SYNQUACER_I2C_BCR_INT BIT(0) // Interrupt +#define SYNQUACER_I2C_BCR_INTE BIT(1) // Interrupt Enable +#define SYNQUACER_I2C_BCR_GCAA BIT(2) // Gen. Call Access Ack. +#define SYNQUACER_I2C_BCR_ACK BIT(3) // Acknowledge +#define SYNQUACER_I2C_BCR_MSS BIT(4) // Master Slave Select +#define SYNQUACER_I2C_BCR_SCC BIT(5) // Start Condition Cont. +#define SYNQUACER_I2C_BCR_BEIE BIT(6) // Bus Error Int Enable +#define SYNQUACER_I2C_BCR_BER BIT(7) // Bus Error + +#define SYNQUACER_I2C_CCR_CS_MASK (0x1f) // CCR Clock Period Sel. +#define SYNQUACER_I2C_CCR_EN BIT(5) // Enable +#define SYNQUACER_I2C_CCR_FM BIT(6) // Speed Mode Select + +#define SYNQUACER_I2C_CSR_CS_MASK (0x3f) // CSR Clock Period Sel. + +#define SYNQUACER_I2C_BC2R_SCLL BIT(0) // SCL Low Drive +#define SYNQUACER_I2C_BC2R_SDAL BIT(1) // SDA Low Drive +#define SYNQUACER_I2C_BC2R_SCLS BIT(4) // SCL Status +#define SYNQUACER_I2C_BC2R_SDAS BIT(5) // SDA Status + +/* PCLK frequency */ +#define SYNQUACER_I2C_BUS_CLK_FR(rate) (((rate) / 20000000) + 1) + +/* STANDARD MODE frequency */ +#define SYNQUACER_I2C_CLK_MASTER_STD(rate) \ + DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_MAX_STANDARD_MODE_FREQ) - 2, 2) +/* FAST MODE frequency */ +#define SYNQUACER_I2C_CLK_MASTER_FAST(rate) \ + DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_MAX_FAST_MODE_FREQ) - 2) * 2, 3) + +/* (clkrate <= 18000000) */ +/* calculate the value of CS bits in CCR register on standard mode */ +#define SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rate) \ + ((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 65) \ + & SYNQUACER_I2C_CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on standard mode */ +#define SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rate) 0x00 + +/* calculate the value of CS bits in CCR register on fast mode */ +#define SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rate) \ + ((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \ + & SYNQUACER_I2C_CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on fast mode */ +#define SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rate) 0x00 + +/* (clkrate > 18000000) */ +/* calculate the value of CS bits in CCR register on standard mode */ +#define SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rate) \ + ((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) \ + & SYNQUACER_I2C_CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on standard mode */ +#define SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rate) \ + (((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) >> 5) \ + & SYNQUACER_I2C_CSR_CS_MASK) + +/* calculate the value of CS bits in CCR register on fast mode */ +#define SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rate) \ + ((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \ + & SYNQUACER_I2C_CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register on fast mode */ +#define SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rate) \ + (((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) >> 5) \ + & SYNQUACER_I2C_CSR_CS_MASK) + +/* min I2C clock frequency 14M */ +#define SYNQUACER_I2C_MIN_CLK_RATE (14 * 1000000) +/* max I2C clock frequency 200M */ +#define SYNQUACER_I2C_MAX_CLK_RATE (200 * 1000000) +/* I2C clock frequency 18M */ +#define SYNQUACER_I2C_CLK_RATE_18M (18 * 1000000) + +#define SYNQUACER_I2C_SPEED_FM 400 // Fast Mode +#define SYNQUACER_I2C_SPEED_SM 100 // Standard Mode + +enum i2c_state { + STATE_IDLE, + STATE_START, + STATE_READ, + STATE_WRITE +}; + +struct synquacer_i2c { + struct completion completion; + + struct i2c_msg *msg; + u32 msg_num; + u32 msg_idx; + u32 msg_ptr; + + int irq; + struct device *dev; + void __iomem *base; + struct clk *pclk; + u32 pclkrate; + u32 speed_khz; + u32 timeout_ms; + enum i2c_state state; + struct i2c_adapter adapter; +}; + +static inline int is_lastmsg(struct synquacer_i2c *i2c) +{ + return i2c->msg_idx >= (i2c->msg_num - 1); +} + +static inline int is_msglast(struct synquacer_i2c *i2c) +{ + return i2c->msg_ptr == (i2c->msg->len - 1); +} + +static inline int is_msgend(struct synquacer_i2c *i2c) +{ + return i2c->msg_ptr >= i2c->msg->len; +} + +static inline unsigned long calc_timeout_ms(struct synquacer_i2c *i2c, + struct i2c_msg *msgs, + int num) +{ + unsigned long bit_count = 0; + int i; + + for (i = 0; i < num; i++, msgs++) + bit_count += msgs->len; + + return DIV_ROUND_UP((bit_count * 9 + num * 10) * 3, 200) + 10; +} + +static void synquacer_i2c_stop(struct synquacer_i2c *i2c, int ret) +{ + /* + * clear IRQ (INT=0, BER=0) + * set Stop Condition (MSS=0) + * Interrupt Disable + */ + writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR); + + i2c->state = STATE_IDLE; + + i2c->msg_ptr = 0; + i2c->msg = NULL; + i2c->msg_idx++; + i2c->msg_num = 0; + if (ret) + i2c->msg_idx = ret; + + complete(&i2c->completion); +} + +static void synquacer_i2c_hw_init(struct synquacer_i2c *i2c) +{ + unsigned char ccr_cs, csr_cs; + u32 rt = i2c->pclkrate; + + /* Set own Address */ + writeb(0, i2c->base + SYNQUACER_I2C_REG_ADR); + + /* Set PCLK frequency */ + writeb(SYNQUACER_I2C_BUS_CLK_FR(i2c->pclkrate), + i2c->base + SYNQUACER_I2C_REG_FSR); + + switch (i2c->speed_khz) { + case SYNQUACER_I2C_SPEED_FM: + if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) { + ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rt); + csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rt); + } else { + ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rt); + csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rt); + } + + /* Set Clock and enable, Set fast mode */ + writeb(ccr_cs | SYNQUACER_I2C_CCR_FM | + SYNQUACER_I2C_CCR_EN, + i2c->base + SYNQUACER_I2C_REG_CCR); + writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR); + break; + case SYNQUACER_I2C_SPEED_SM: + if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) { + ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rt); + csr_cs = SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rt); + } else { + ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rt); + csr_cs = SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rt); + } + + /* Set Clock and enable, Set standard mode */ + writeb(ccr_cs | SYNQUACER_I2C_CCR_EN, + i2c->base + SYNQUACER_I2C_REG_CCR); + writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR); + break; + default: + WARN_ON(1); + } + + /* clear IRQ (INT=0, BER=0), Interrupt Disable */ + writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR); + writeb(0, i2c->base + SYNQUACER_I2C_REG_BC2R); +} + +static void synquacer_i2c_hw_reset(struct synquacer_i2c *i2c) +{ + /* Disable clock */ + writeb(0, i2c->base + SYNQUACER_I2C_REG_CCR); + writeb(0, i2c->base + SYNQUACER_I2C_REG_CSR); + + WAIT_PCLK(100, i2c->pclkrate); +} + +static int synquacer_i2c_master_start(struct synquacer_i2c *i2c, + struct i2c_msg *pmsg) +{ + unsigned char bsr, bcr; + + writeb(i2c_8bit_addr_from_msg(pmsg), i2c->base + SYNQUACER_I2C_REG_DAR); + + dev_dbg(i2c->dev, "slave:0x%02x\n", pmsg->addr); + + /* Generate Start Condition */ + bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); + bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR); + dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr); + + if ((bsr & SYNQUACER_I2C_BSR_BB) && + !(bcr & SYNQUACER_I2C_BCR_MSS)) { + dev_dbg(i2c->dev, "bus is busy"); + return -EBUSY; + } + + if (bsr & SYNQUACER_I2C_BSR_BB) { /* Bus is busy */ + dev_dbg(i2c->dev, "Continuous Start"); + writeb(bcr | SYNQUACER_I2C_BCR_SCC, + i2c->base + SYNQUACER_I2C_REG_BCR); + } else { + if (bcr & SYNQUACER_I2C_BCR_MSS) { + dev_dbg(i2c->dev, "not in master mode"); + return -EAGAIN; + } + dev_dbg(i2c->dev, "Start Condition"); + /* Start Condition + Enable Interrupts */ + writeb(bcr | SYNQUACER_I2C_BCR_MSS | + SYNQUACER_I2C_BCR_INTE | SYNQUACER_I2C_BCR_BEIE, + i2c->base + SYNQUACER_I2C_REG_BCR); + } + + WAIT_PCLK(10, i2c->pclkrate); + + /* get BSR & BCR registers */ + bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); + bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR); + dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr); + + if ((bsr & SYNQUACER_I2C_BSR_AL) || + !(bcr & SYNQUACER_I2C_BCR_MSS)) { + dev_dbg(i2c->dev, "arbitration lost\n"); + return -EAGAIN; + } + + return 0; +} + +static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c, + struct i2c_msg *msgs, int num) +{ + unsigned char bsr; + unsigned long timeout; + int ret; + + synquacer_i2c_hw_init(i2c); + bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); + if (bsr & SYNQUACER_I2C_BSR_BB) { + dev_err(i2c->dev, "cannot get bus (bus busy)\n"); + return -EBUSY; + } + + reinit_completion(&i2c->completion); + + i2c->msg = msgs; + i2c->msg_num = num; + i2c->msg_ptr = 0; + i2c->msg_idx = 0; + i2c->state = STATE_START; + + ret = synquacer_i2c_master_start(i2c, i2c->msg); + if (ret < 0) { + dev_dbg(i2c->dev, "Address failed: (%d)\n", ret); + return ret; + } + + timeout = wait_for_completion_timeout(&i2c->completion, + msecs_to_jiffies(i2c->timeout_ms)); + if (timeout == 0) { + dev_dbg(i2c->dev, "timeout\n"); + return -EAGAIN; + } + + ret = i2c->msg_idx; + if (ret != num) { + dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); + return -EAGAIN; + } + + /* wait 2 clock periods to ensure the stop has been through the bus */ + udelay(DIV_ROUND_UP(2 * 1000, i2c->speed_khz)); + + return ret; +} + +static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id) +{ + struct synquacer_i2c *i2c = dev_id; + + unsigned char byte; + unsigned char bsr, bcr; + int ret; + + bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR); + bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR); + dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr); + + if (bcr & SYNQUACER_I2C_BCR_BER) { + dev_err(i2c->dev, "bus error\n"); + synquacer_i2c_stop(i2c, -EAGAIN); + goto out; + } + if ((bsr & SYNQUACER_I2C_BSR_AL) || + !(bcr & SYNQUACER_I2C_BCR_MSS)) { + dev_dbg(i2c->dev, "arbitration lost\n"); + synquacer_i2c_stop(i2c, -EAGAIN); + goto out; + } + + switch (i2c->state) { + case STATE_START: + if (bsr & SYNQUACER_I2C_BSR_LRB) { + dev_dbg(i2c->dev, "ack was not received\n"); + synquacer_i2c_stop(i2c, -EAGAIN); + goto out; + } + + if (i2c->msg->flags & I2C_M_RD) + i2c->state = STATE_READ; + else + i2c->state = STATE_WRITE; + + if (is_lastmsg(i2c) && i2c->msg->len == 0) { + synquacer_i2c_stop(i2c, 0); + goto out; + } + + if (i2c->state == STATE_READ) + goto prepare_read; + fallthrough; + + case STATE_WRITE: + if (bsr & SYNQUACER_I2C_BSR_LRB) { + dev_dbg(i2c->dev, "WRITE: No Ack\n"); + synquacer_i2c_stop(i2c, -EAGAIN); + goto out; + } + + if (!is_msgend(i2c)) { + writeb(i2c->msg->buf[i2c->msg_ptr++], + i2c->base + SYNQUACER_I2C_REG_DAR); + + /* clear IRQ, and continue */ + writeb(SYNQUACER_I2C_BCR_BEIE | + SYNQUACER_I2C_BCR_MSS | + SYNQUACER_I2C_BCR_INTE, + i2c->base + SYNQUACER_I2C_REG_BCR); + break; + } + if (is_lastmsg(i2c)) { + synquacer_i2c_stop(i2c, 0); + break; + } + dev_dbg(i2c->dev, "WRITE: Next Message\n"); + + i2c->msg_ptr = 0; + i2c->msg_idx++; + i2c->msg++; + + /* send the new start */ + ret = synquacer_i2c_master_start(i2c, i2c->msg); + if (ret < 0) { + dev_dbg(i2c->dev, "restart error (%d)\n", ret); + synquacer_i2c_stop(i2c, -EAGAIN); + break; + } + i2c->state = STATE_START; + break; + + case STATE_READ: + byte = readb(i2c->base + SYNQUACER_I2C_REG_DAR); + if (!(bsr & SYNQUACER_I2C_BSR_FBT)) /* data */ + i2c->msg->buf[i2c->msg_ptr++] = byte; + else /* address */ + dev_dbg(i2c->dev, "address:0x%02x. ignore it.\n", byte); + +prepare_read: + if (is_msglast(i2c)) { + writeb(SYNQUACER_I2C_BCR_MSS | + SYNQUACER_I2C_BCR_BEIE | + SYNQUACER_I2C_BCR_INTE, + i2c->base + SYNQUACER_I2C_REG_BCR); + break; + } + if (!is_msgend(i2c)) { + writeb(SYNQUACER_I2C_BCR_MSS | + SYNQUACER_I2C_BCR_BEIE | + SYNQUACER_I2C_BCR_INTE | + SYNQUACER_I2C_BCR_ACK, + i2c->base + SYNQUACER_I2C_REG_BCR); + break; + } + if (is_lastmsg(i2c)) { + /* last message, send stop and complete */ + dev_dbg(i2c->dev, "READ: Send Stop\n"); + synquacer_i2c_stop(i2c, 0); + break; + } + dev_dbg(i2c->dev, "READ: Next Transfer\n"); + + i2c->msg_ptr = 0; + i2c->msg_idx++; + i2c->msg++; + + ret = synquacer_i2c_master_start(i2c, i2c->msg); + if (ret < 0) { + dev_dbg(i2c->dev, "restart error (%d)\n", ret); + synquacer_i2c_stop(i2c, -EAGAIN); + } else { + i2c->state = STATE_START; + } + break; + default: + dev_err(i2c->dev, "called in err STATE (%d)\n", i2c->state); + break; + } + +out: + WAIT_PCLK(10, i2c->pclkrate); + return IRQ_HANDLED; +} + +static int synquacer_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) +{ + struct synquacer_i2c *i2c; + int retry; + int ret; + + i2c = i2c_get_adapdata(adap); + i2c->timeout_ms = calc_timeout_ms(i2c, msgs, num); + + dev_dbg(i2c->dev, "calculated timeout %d ms\n", i2c->timeout_ms); + + for (retry = 0; retry <= adap->retries; retry++) { + ret = synquacer_i2c_doxfer(i2c, msgs, num); + if (ret != -EAGAIN) + return ret; + + dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry); + + synquacer_i2c_hw_reset(i2c); + } + return -EIO; +} + +static u32 synquacer_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm synquacer_i2c_algo = { + .master_xfer = synquacer_i2c_xfer, + .functionality = synquacer_i2c_functionality, +}; + +static const struct i2c_adapter synquacer_i2c_ops = { + .owner = THIS_MODULE, + .name = "synquacer_i2c-adapter", + .algo = &synquacer_i2c_algo, + .retries = 5, +}; + +static int synquacer_i2c_probe(struct platform_device *pdev) +{ + struct synquacer_i2c *i2c; + u32 bus_speed; + int ret; + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + bus_speed = i2c_acpi_find_bus_speed(&pdev->dev); + if (!bus_speed) + device_property_read_u32(&pdev->dev, "clock-frequency", + &bus_speed); + + device_property_read_u32(&pdev->dev, "socionext,pclk-rate", + &i2c->pclkrate); + + i2c->pclk = devm_clk_get(&pdev->dev, "pclk"); + if (PTR_ERR(i2c->pclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!IS_ERR_OR_NULL(i2c->pclk)) { + dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk); + + ret = clk_prepare_enable(i2c->pclk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock (%d)\n", + ret); + return ret; + } + i2c->pclkrate = clk_get_rate(i2c->pclk); + } + + if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE || + i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) { + dev_err(&pdev->dev, "PCLK missing or out of range (%d)\n", + i2c->pclkrate); + return -EINVAL; + } + + i2c->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(i2c->base)) + return PTR_ERR(i2c->base); + + i2c->irq = platform_get_irq(pdev, 0); + if (i2c->irq < 0) + return i2c->irq; + + ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr, + 0, dev_name(&pdev->dev), i2c); + if (ret < 0) { + dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); + return ret; + } + + i2c->state = STATE_IDLE; + i2c->dev = &pdev->dev; + i2c->adapter = synquacer_i2c_ops; + i2c_set_adapdata(&i2c->adapter, i2c); + i2c->adapter.dev.parent = &pdev->dev; + i2c->adapter.dev.of_node = pdev->dev.of_node; + ACPI_COMPANION_SET(&i2c->adapter.dev, ACPI_COMPANION(&pdev->dev)); + i2c->adapter.nr = pdev->id; + init_completion(&i2c->completion); + + if (bus_speed < I2C_MAX_FAST_MODE_FREQ) + i2c->speed_khz = SYNQUACER_I2C_SPEED_SM; + else + i2c->speed_khz = SYNQUACER_I2C_SPEED_FM; + + synquacer_i2c_hw_init(i2c); + + ret = i2c_add_numbered_adapter(&i2c->adapter); + if (ret) { + dev_err(&pdev->dev, "failed to add bus to i2c core\n"); + return ret; + } + + platform_set_drvdata(pdev, i2c); + + dev_info(&pdev->dev, "%s: synquacer_i2c adapter\n", + dev_name(&i2c->adapter.dev)); + + return 0; +} + +static int synquacer_i2c_remove(struct platform_device *pdev) +{ + struct synquacer_i2c *i2c = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c->adapter); + if (!IS_ERR(i2c->pclk)) + clk_disable_unprepare(i2c->pclk); + + return 0; +}; + +static const struct of_device_id synquacer_i2c_dt_ids[] = { + { .compatible = "socionext,synquacer-i2c" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, synquacer_i2c_dt_ids); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id synquacer_i2c_acpi_ids[] = { + { "SCX0003" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(acpi, synquacer_i2c_acpi_ids); +#endif + +static struct platform_driver synquacer_i2c_driver = { + .probe = synquacer_i2c_probe, + .remove = synquacer_i2c_remove, + .driver = { + .name = "synquacer_i2c", + .of_match_table = of_match_ptr(synquacer_i2c_dt_ids), + .acpi_match_table = ACPI_PTR(synquacer_i2c_acpi_ids), + }, +}; +module_platform_driver(synquacer_i2c_driver); + +MODULE_AUTHOR("Fujitsu Semiconductor Ltd"); +MODULE_DESCRIPTION("Socionext SynQuacer I2C Driver"); +MODULE_LICENSE("GPL v2"); |