summaryrefslogtreecommitdiffstats
path: root/drivers/iio/accel/sca3000.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/accel/sca3000.c')
-rw-r--r--drivers/iio/accel/sca3000.c1560
1 files changed, 1560 insertions, 0 deletions
diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
new file mode 100644
index 000000000..87c54e41f
--- /dev/null
+++ b/drivers/iio/accel/sca3000.c
@@ -0,0 +1,1560 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sca3000_core.c -- support VTI sca3000 series accelerometers via SPI
+ *
+ * Copyright (c) 2009 Jonathan Cameron <jic23@kernel.org>
+ *
+ * See industrialio/accels/sca3000.h for comments.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+
+#define SCA3000_WRITE_REG(a) (((a) << 2) | 0x02)
+#define SCA3000_READ_REG(a) ((a) << 2)
+
+#define SCA3000_REG_REVID_ADDR 0x00
+#define SCA3000_REG_REVID_MAJOR_MASK GENMASK(8, 4)
+#define SCA3000_REG_REVID_MINOR_MASK GENMASK(3, 0)
+
+#define SCA3000_REG_STATUS_ADDR 0x02
+#define SCA3000_LOCKED BIT(5)
+#define SCA3000_EEPROM_CS_ERROR BIT(1)
+#define SCA3000_SPI_FRAME_ERROR BIT(0)
+
+/* All reads done using register decrement so no need to directly access LSBs */
+#define SCA3000_REG_X_MSB_ADDR 0x05
+#define SCA3000_REG_Y_MSB_ADDR 0x07
+#define SCA3000_REG_Z_MSB_ADDR 0x09
+
+#define SCA3000_REG_RING_OUT_ADDR 0x0f
+
+/* Temp read untested - the e05 doesn't have the sensor */
+#define SCA3000_REG_TEMP_MSB_ADDR 0x13
+
+#define SCA3000_REG_MODE_ADDR 0x14
+#define SCA3000_MODE_PROT_MASK 0x28
+#define SCA3000_REG_MODE_RING_BUF_ENABLE BIT(7)
+#define SCA3000_REG_MODE_RING_BUF_8BIT BIT(6)
+
+/*
+ * Free fall detection triggers an interrupt if the acceleration
+ * is below a threshold for equivalent of 25cm drop
+ */
+#define SCA3000_REG_MODE_FREE_FALL_DETECT BIT(4)
+#define SCA3000_REG_MODE_MEAS_MODE_NORMAL 0x00
+#define SCA3000_REG_MODE_MEAS_MODE_OP_1 0x01
+#define SCA3000_REG_MODE_MEAS_MODE_OP_2 0x02
+
+/*
+ * In motion detection mode the accelerations are band pass filtered
+ * (approx 1 - 25Hz) and then a programmable threshold used to trigger
+ * and interrupt.
+ */
+#define SCA3000_REG_MODE_MEAS_MODE_MOT_DET 0x03
+#define SCA3000_REG_MODE_MODE_MASK 0x03
+
+#define SCA3000_REG_BUF_COUNT_ADDR 0x15
+
+#define SCA3000_REG_INT_STATUS_ADDR 0x16
+#define SCA3000_REG_INT_STATUS_THREE_QUARTERS BIT(7)
+#define SCA3000_REG_INT_STATUS_HALF BIT(6)
+
+#define SCA3000_INT_STATUS_FREE_FALL BIT(3)
+#define SCA3000_INT_STATUS_Y_TRIGGER BIT(2)
+#define SCA3000_INT_STATUS_X_TRIGGER BIT(1)
+#define SCA3000_INT_STATUS_Z_TRIGGER BIT(0)
+
+/* Used to allow access to multiplexed registers */
+#define SCA3000_REG_CTRL_SEL_ADDR 0x18
+/* Only available for SCA3000-D03 and SCA3000-D01 */
+#define SCA3000_REG_CTRL_SEL_I2C_DISABLE 0x01
+#define SCA3000_REG_CTRL_SEL_MD_CTRL 0x02
+#define SCA3000_REG_CTRL_SEL_MD_Y_TH 0x03
+#define SCA3000_REG_CTRL_SEL_MD_X_TH 0x04
+#define SCA3000_REG_CTRL_SEL_MD_Z_TH 0x05
+/*
+ * BE VERY CAREFUL WITH THIS, IF 3 BITS ARE NOT SET the device
+ * will not function
+ */
+#define SCA3000_REG_CTRL_SEL_OUT_CTRL 0x0B
+
+#define SCA3000_REG_OUT_CTRL_PROT_MASK 0xE0
+#define SCA3000_REG_OUT_CTRL_BUF_X_EN 0x10
+#define SCA3000_REG_OUT_CTRL_BUF_Y_EN 0x08
+#define SCA3000_REG_OUT_CTRL_BUF_Z_EN 0x04
+#define SCA3000_REG_OUT_CTRL_BUF_DIV_MASK 0x03
+#define SCA3000_REG_OUT_CTRL_BUF_DIV_4 0x02
+#define SCA3000_REG_OUT_CTRL_BUF_DIV_2 0x01
+
+
+/*
+ * Control which motion detector interrupts are on.
+ * For now only OR combinations are supported.
+ */
+#define SCA3000_MD_CTRL_PROT_MASK 0xC0
+#define SCA3000_MD_CTRL_OR_Y BIT(0)
+#define SCA3000_MD_CTRL_OR_X BIT(1)
+#define SCA3000_MD_CTRL_OR_Z BIT(2)
+/* Currently unsupported */
+#define SCA3000_MD_CTRL_AND_Y BIT(3)
+#define SCA3000_MD_CTRL_AND_X BIT(4)
+#define SCA3000_MD_CTRL_AND_Z BIT(5)
+
+/*
+ * Some control registers of complex access methods requiring this register to
+ * be used to remove a lock.
+ */
+#define SCA3000_REG_UNLOCK_ADDR 0x1e
+
+#define SCA3000_REG_INT_MASK_ADDR 0x21
+#define SCA3000_REG_INT_MASK_PROT_MASK 0x1C
+
+#define SCA3000_REG_INT_MASK_RING_THREE_QUARTER BIT(7)
+#define SCA3000_REG_INT_MASK_RING_HALF BIT(6)
+
+#define SCA3000_REG_INT_MASK_ALL_INTS 0x02
+#define SCA3000_REG_INT_MASK_ACTIVE_HIGH 0x01
+#define SCA3000_REG_INT_MASK_ACTIVE_LOW 0x00
+/* Values of multiplexed registers (write to ctrl_data after select) */
+#define SCA3000_REG_CTRL_DATA_ADDR 0x22
+
+/*
+ * Measurement modes available on some sca3000 series chips. Code assumes others
+ * may become available in the future.
+ *
+ * Bypass - Bypass the low-pass filter in the signal channel so as to increase
+ * signal bandwidth.
+ *
+ * Narrow - Narrow low-pass filtering of the signal channel and half output
+ * data rate by decimation.
+ *
+ * Wide - Widen low-pass filtering of signal channel to increase bandwidth
+ */
+#define SCA3000_OP_MODE_BYPASS 0x01
+#define SCA3000_OP_MODE_NARROW 0x02
+#define SCA3000_OP_MODE_WIDE 0x04
+#define SCA3000_MAX_TX 6
+#define SCA3000_MAX_RX 2
+
+/**
+ * struct sca3000_state - device instance state information
+ * @us: the associated spi device
+ * @info: chip variant information
+ * @last_timestamp: the timestamp of the last event
+ * @mo_det_use_count: reference counter for the motion detection unit
+ * @lock: lock used to protect elements of sca3000_state
+ * and the underlying device state.
+ * @tx: dma-able transmit buffer
+ * @rx: dma-able receive buffer
+ **/
+struct sca3000_state {
+ struct spi_device *us;
+ const struct sca3000_chip_info *info;
+ s64 last_timestamp;
+ int mo_det_use_count;
+ struct mutex lock;
+ /* Can these share a cacheline ? */
+ u8 rx[384] __aligned(IIO_DMA_MINALIGN);
+ u8 tx[6] __aligned(IIO_DMA_MINALIGN);
+};
+
+/**
+ * struct sca3000_chip_info - model dependent parameters
+ * @scale: scale * 10^-6
+ * @temp_output: some devices have temperature sensors.
+ * @measurement_mode_freq: normal mode sampling frequency
+ * @measurement_mode_3db_freq: 3db cutoff frequency of the low pass filter for
+ * the normal measurement mode.
+ * @option_mode_1: first optional mode. Not all models have one
+ * @option_mode_1_freq: option mode 1 sampling frequency
+ * @option_mode_1_3db_freq: 3db cutoff frequency of the low pass filter for
+ * the first option mode.
+ * @option_mode_2: second optional mode. Not all chips have one
+ * @option_mode_2_freq: option mode 2 sampling frequency
+ * @option_mode_2_3db_freq: 3db cutoff frequency of the low pass filter for
+ * the second option mode.
+ * @mot_det_mult_xz: Bit wise multipliers to calculate the threshold
+ * for motion detection in the x and z axis.
+ * @mot_det_mult_y: Bit wise multipliers to calculate the threshold
+ * for motion detection in the y axis.
+ *
+ * This structure is used to hold information about the functionality of a given
+ * sca3000 variant.
+ **/
+struct sca3000_chip_info {
+ unsigned int scale;
+ bool temp_output;
+ int measurement_mode_freq;
+ int measurement_mode_3db_freq;
+ int option_mode_1;
+ int option_mode_1_freq;
+ int option_mode_1_3db_freq;
+ int option_mode_2;
+ int option_mode_2_freq;
+ int option_mode_2_3db_freq;
+ int mot_det_mult_xz[6];
+ int mot_det_mult_y[7];
+};
+
+enum sca3000_variant {
+ d01,
+ e02,
+ e04,
+ e05,
+};
+
+/*
+ * Note where option modes are not defined, the chip simply does not
+ * support any.
+ * Other chips in the sca3000 series use i2c and are not included here.
+ *
+ * Some of these devices are only listed in the family data sheet and
+ * do not actually appear to be available.
+ */
+static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = {
+ [d01] = {
+ .scale = 7357,
+ .temp_output = true,
+ .measurement_mode_freq = 250,
+ .measurement_mode_3db_freq = 45,
+ .option_mode_1 = SCA3000_OP_MODE_BYPASS,
+ .option_mode_1_freq = 250,
+ .option_mode_1_3db_freq = 70,
+ .mot_det_mult_xz = {50, 100, 200, 350, 650, 1300},
+ .mot_det_mult_y = {50, 100, 150, 250, 450, 850, 1750},
+ },
+ [e02] = {
+ .scale = 9810,
+ .measurement_mode_freq = 125,
+ .measurement_mode_3db_freq = 40,
+ .option_mode_1 = SCA3000_OP_MODE_NARROW,
+ .option_mode_1_freq = 63,
+ .option_mode_1_3db_freq = 11,
+ .mot_det_mult_xz = {100, 150, 300, 550, 1050, 2050},
+ .mot_det_mult_y = {50, 100, 200, 350, 700, 1350, 2700},
+ },
+ [e04] = {
+ .scale = 19620,
+ .measurement_mode_freq = 100,
+ .measurement_mode_3db_freq = 38,
+ .option_mode_1 = SCA3000_OP_MODE_NARROW,
+ .option_mode_1_freq = 50,
+ .option_mode_1_3db_freq = 9,
+ .option_mode_2 = SCA3000_OP_MODE_WIDE,
+ .option_mode_2_freq = 400,
+ .option_mode_2_3db_freq = 70,
+ .mot_det_mult_xz = {200, 300, 600, 1100, 2100, 4100},
+ .mot_det_mult_y = {100, 200, 400, 7000, 1400, 2700, 54000},
+ },
+ [e05] = {
+ .scale = 61313,
+ .measurement_mode_freq = 200,
+ .measurement_mode_3db_freq = 60,
+ .option_mode_1 = SCA3000_OP_MODE_NARROW,
+ .option_mode_1_freq = 50,
+ .option_mode_1_3db_freq = 9,
+ .option_mode_2 = SCA3000_OP_MODE_WIDE,
+ .option_mode_2_freq = 400,
+ .option_mode_2_3db_freq = 75,
+ .mot_det_mult_xz = {600, 900, 1700, 3200, 6100, 11900},
+ .mot_det_mult_y = {300, 600, 1200, 2000, 4100, 7800, 15600},
+ },
+};
+
+static int sca3000_write_reg(struct sca3000_state *st, u8 address, u8 val)
+{
+ st->tx[0] = SCA3000_WRITE_REG(address);
+ st->tx[1] = val;
+ return spi_write(st->us, st->tx, 2);
+}
+
+static int sca3000_read_data_short(struct sca3000_state *st,
+ u8 reg_address_high,
+ int len)
+{
+ struct spi_transfer xfer[2] = {
+ {
+ .len = 1,
+ .tx_buf = st->tx,
+ }, {
+ .len = len,
+ .rx_buf = st->rx,
+ }
+ };
+ st->tx[0] = SCA3000_READ_REG(reg_address_high);
+
+ return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
+}
+
+/**
+ * sca3000_reg_lock_on() - test if the ctrl register lock is on
+ * @st: Driver specific device instance data.
+ *
+ * Lock must be held.
+ **/
+static int sca3000_reg_lock_on(struct sca3000_state *st)
+{
+ int ret;
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_STATUS_ADDR, 1);
+ if (ret < 0)
+ return ret;
+
+ return !(st->rx[0] & SCA3000_LOCKED);
+}
+
+/**
+ * __sca3000_unlock_reg_lock() - unlock the control registers
+ * @st: Driver specific device instance data.
+ *
+ * Note the device does not appear to support doing this in a single transfer.
+ * This should only ever be used as part of ctrl reg read.
+ * Lock must be held before calling this
+ */
+static int __sca3000_unlock_reg_lock(struct sca3000_state *st)
+{
+ struct spi_transfer xfer[3] = {
+ {
+ .len = 2,
+ .cs_change = 1,
+ .tx_buf = st->tx,
+ }, {
+ .len = 2,
+ .cs_change = 1,
+ .tx_buf = st->tx + 2,
+ }, {
+ .len = 2,
+ .tx_buf = st->tx + 4,
+ },
+ };
+ st->tx[0] = SCA3000_WRITE_REG(SCA3000_REG_UNLOCK_ADDR);
+ st->tx[1] = 0x00;
+ st->tx[2] = SCA3000_WRITE_REG(SCA3000_REG_UNLOCK_ADDR);
+ st->tx[3] = 0x50;
+ st->tx[4] = SCA3000_WRITE_REG(SCA3000_REG_UNLOCK_ADDR);
+ st->tx[5] = 0xA0;
+
+ return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
+}
+
+/**
+ * sca3000_write_ctrl_reg() - write to a lock protect ctrl register
+ * @st: Driver specific device instance data.
+ * @sel: selects which registers we wish to write to
+ * @val: the value to be written
+ *
+ * Certain control registers are protected against overwriting by the lock
+ * register and use a shared write address. This function allows writing of
+ * these registers.
+ * Lock must be held.
+ */
+static int sca3000_write_ctrl_reg(struct sca3000_state *st,
+ u8 sel,
+ uint8_t val)
+{
+ int ret;
+
+ ret = sca3000_reg_lock_on(st);
+ if (ret < 0)
+ goto error_ret;
+ if (ret) {
+ ret = __sca3000_unlock_reg_lock(st);
+ if (ret)
+ goto error_ret;
+ }
+
+ /* Set the control select register */
+ ret = sca3000_write_reg(st, SCA3000_REG_CTRL_SEL_ADDR, sel);
+ if (ret)
+ goto error_ret;
+
+ /* Write the actual value into the register */
+ ret = sca3000_write_reg(st, SCA3000_REG_CTRL_DATA_ADDR, val);
+
+error_ret:
+ return ret;
+}
+
+/**
+ * sca3000_read_ctrl_reg() - read from lock protected control register.
+ * @st: Driver specific device instance data.
+ * @ctrl_reg: Which ctrl register do we want to read.
+ *
+ * Lock must be held.
+ */
+static int sca3000_read_ctrl_reg(struct sca3000_state *st,
+ u8 ctrl_reg)
+{
+ int ret;
+
+ ret = sca3000_reg_lock_on(st);
+ if (ret < 0)
+ goto error_ret;
+ if (ret) {
+ ret = __sca3000_unlock_reg_lock(st);
+ if (ret)
+ goto error_ret;
+ }
+ /* Set the control select register */
+ ret = sca3000_write_reg(st, SCA3000_REG_CTRL_SEL_ADDR, ctrl_reg);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_read_data_short(st, SCA3000_REG_CTRL_DATA_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ return st->rx[0];
+error_ret:
+ return ret;
+}
+
+/**
+ * sca3000_print_rev() - sysfs interface to read the chip revision number
+ * @indio_dev: Device instance specific generic IIO data.
+ * Driver specific device instance data can be obtained via
+ * iio_priv(indio_dev)
+ */
+static int sca3000_print_rev(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_REVID_ADDR, 1);
+ if (ret < 0)
+ goto error_ret;
+ dev_info(&indio_dev->dev,
+ "sca3000 revision major=%lu, minor=%lu\n",
+ st->rx[0] & SCA3000_REG_REVID_MAJOR_MASK,
+ st->rx[0] & SCA3000_REG_REVID_MINOR_MASK);
+error_ret:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static ssize_t
+sca3000_show_available_3db_freqs(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int len;
+
+ len = sprintf(buf, "%d", st->info->measurement_mode_3db_freq);
+ if (st->info->option_mode_1)
+ len += sprintf(buf + len, " %d",
+ st->info->option_mode_1_3db_freq);
+ if (st->info->option_mode_2)
+ len += sprintf(buf + len, " %d",
+ st->info->option_mode_2_3db_freq);
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR(in_accel_filter_low_pass_3db_frequency_available,
+ S_IRUGO, sca3000_show_available_3db_freqs,
+ NULL, 0);
+
+static const struct iio_event_spec sca3000_event = {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+};
+
+/*
+ * Note the hack in the number of bits to pretend we have 2 more than
+ * we do in the fifo.
+ */
+#define SCA3000_CHAN(index, mod) \
+ { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = mod, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |\
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),\
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+ .address = index, \
+ .scan_index = index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 13, \
+ .storagebits = 16, \
+ .shift = 3, \
+ .endianness = IIO_BE, \
+ }, \
+ .event_spec = &sca3000_event, \
+ .num_event_specs = 1, \
+ }
+
+static const struct iio_event_spec sca3000_freefall_event_spec = {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_PERIOD),
+};
+
+static const struct iio_chan_spec sca3000_channels[] = {
+ SCA3000_CHAN(0, IIO_MOD_X),
+ SCA3000_CHAN(1, IIO_MOD_Y),
+ SCA3000_CHAN(2, IIO_MOD_Z),
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X_AND_Y_AND_Z,
+ .scan_index = -1, /* Fake channel */
+ .event_spec = &sca3000_freefall_event_spec,
+ .num_event_specs = 1,
+ },
+};
+
+static const struct iio_chan_spec sca3000_channels_with_temp[] = {
+ SCA3000_CHAN(0, IIO_MOD_X),
+ SCA3000_CHAN(1, IIO_MOD_Y),
+ SCA3000_CHAN(2, IIO_MOD_Z),
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ /* No buffer support */
+ .scan_index = -1,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 9,
+ .storagebits = 16,
+ .shift = 5,
+ .endianness = IIO_BE,
+ },
+ },
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X_AND_Y_AND_Z,
+ .scan_index = -1, /* Fake channel */
+ .event_spec = &sca3000_freefall_event_spec,
+ .num_event_specs = 1,
+ },
+};
+
+static u8 sca3000_addresses[3][3] = {
+ [0] = {SCA3000_REG_X_MSB_ADDR, SCA3000_REG_CTRL_SEL_MD_X_TH,
+ SCA3000_MD_CTRL_OR_X},
+ [1] = {SCA3000_REG_Y_MSB_ADDR, SCA3000_REG_CTRL_SEL_MD_Y_TH,
+ SCA3000_MD_CTRL_OR_Y},
+ [2] = {SCA3000_REG_Z_MSB_ADDR, SCA3000_REG_CTRL_SEL_MD_Z_TH,
+ SCA3000_MD_CTRL_OR_Z},
+};
+
+/**
+ * __sca3000_get_base_freq() - obtain mode specific base frequency
+ * @st: Private driver specific device instance specific state.
+ * @info: chip type specific information.
+ * @base_freq: Base frequency for the current measurement mode.
+ *
+ * lock must be held
+ */
+static inline int __sca3000_get_base_freq(struct sca3000_state *st,
+ const struct sca3000_chip_info *info,
+ int *base_freq)
+{
+ int ret;
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ switch (SCA3000_REG_MODE_MODE_MASK & st->rx[0]) {
+ case SCA3000_REG_MODE_MEAS_MODE_NORMAL:
+ *base_freq = info->measurement_mode_freq;
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_1:
+ *base_freq = info->option_mode_1_freq;
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_2:
+ *base_freq = info->option_mode_2_freq;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+error_ret:
+ return ret;
+}
+
+/**
+ * sca3000_read_raw_samp_freq() - read_raw handler for IIO_CHAN_INFO_SAMP_FREQ
+ * @st: Private driver specific device instance specific state.
+ * @val: The frequency read back.
+ *
+ * lock must be held
+ **/
+static int sca3000_read_raw_samp_freq(struct sca3000_state *st, int *val)
+{
+ int ret;
+
+ ret = __sca3000_get_base_freq(st, st->info, val);
+ if (ret)
+ return ret;
+
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+ if (ret < 0)
+ return ret;
+
+ if (*val > 0) {
+ ret &= SCA3000_REG_OUT_CTRL_BUF_DIV_MASK;
+ switch (ret) {
+ case SCA3000_REG_OUT_CTRL_BUF_DIV_2:
+ *val /= 2;
+ break;
+ case SCA3000_REG_OUT_CTRL_BUF_DIV_4:
+ *val /= 4;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * sca3000_write_raw_samp_freq() - write_raw handler for IIO_CHAN_INFO_SAMP_FREQ
+ * @st: Private driver specific device instance specific state.
+ * @val: The frequency desired.
+ *
+ * lock must be held
+ */
+static int sca3000_write_raw_samp_freq(struct sca3000_state *st, int val)
+{
+ int ret, base_freq, ctrlval;
+
+ ret = __sca3000_get_base_freq(st, st->info, &base_freq);
+ if (ret)
+ return ret;
+
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+ if (ret < 0)
+ return ret;
+
+ ctrlval = ret & ~SCA3000_REG_OUT_CTRL_BUF_DIV_MASK;
+
+ if (val == base_freq / 2)
+ ctrlval |= SCA3000_REG_OUT_CTRL_BUF_DIV_2;
+ if (val == base_freq / 4)
+ ctrlval |= SCA3000_REG_OUT_CTRL_BUF_DIV_4;
+ else if (val != base_freq)
+ return -EINVAL;
+
+ return sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL,
+ ctrlval);
+}
+
+static int sca3000_read_3db_freq(struct sca3000_state *st, int *val)
+{
+ int ret;
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+
+ /* mask bottom 2 bits - only ones that are relevant */
+ st->rx[0] &= SCA3000_REG_MODE_MODE_MASK;
+ switch (st->rx[0]) {
+ case SCA3000_REG_MODE_MEAS_MODE_NORMAL:
+ *val = st->info->measurement_mode_3db_freq;
+ return IIO_VAL_INT;
+ case SCA3000_REG_MODE_MEAS_MODE_MOT_DET:
+ return -EBUSY;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_1:
+ *val = st->info->option_mode_1_3db_freq;
+ return IIO_VAL_INT;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_2:
+ *val = st->info->option_mode_2_3db_freq;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sca3000_write_3db_freq(struct sca3000_state *st, int val)
+{
+ int ret;
+ int mode;
+
+ if (val == st->info->measurement_mode_3db_freq)
+ mode = SCA3000_REG_MODE_MEAS_MODE_NORMAL;
+ else if (st->info->option_mode_1 &&
+ (val == st->info->option_mode_1_3db_freq))
+ mode = SCA3000_REG_MODE_MEAS_MODE_OP_1;
+ else if (st->info->option_mode_2 &&
+ (val == st->info->option_mode_2_3db_freq))
+ mode = SCA3000_REG_MODE_MEAS_MODE_OP_2;
+ else
+ return -EINVAL;
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+
+ st->rx[0] &= ~SCA3000_REG_MODE_MODE_MASK;
+ st->rx[0] |= (mode & SCA3000_REG_MODE_MODE_MASK);
+
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR, st->rx[0]);
+}
+
+static int sca3000_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+ u8 address;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&st->lock);
+ if (chan->type == IIO_ACCEL) {
+ if (st->mo_det_use_count) {
+ mutex_unlock(&st->lock);
+ return -EBUSY;
+ }
+ address = sca3000_addresses[chan->address][0];
+ ret = sca3000_read_data_short(st, address, 2);
+ if (ret < 0) {
+ mutex_unlock(&st->lock);
+ return ret;
+ }
+ *val = sign_extend32(be16_to_cpup((__be16 *)st->rx) >>
+ chan->scan_type.shift,
+ chan->scan_type.realbits - 1);
+ } else {
+ /* get the temperature when available */
+ ret = sca3000_read_data_short(st,
+ SCA3000_REG_TEMP_MSB_ADDR,
+ 2);
+ if (ret < 0) {
+ mutex_unlock(&st->lock);
+ return ret;
+ }
+ *val = (be16_to_cpup((__be16 *)st->rx) >>
+ chan->scan_type.shift) &
+ GENMASK(chan->scan_type.realbits - 1, 0);
+ }
+ mutex_unlock(&st->lock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ if (chan->type == IIO_ACCEL)
+ *val2 = st->info->scale;
+ else /* temperature */
+ *val2 = 555556;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = -214;
+ *val2 = 600000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ mutex_lock(&st->lock);
+ ret = sca3000_read_raw_samp_freq(st, val);
+ mutex_unlock(&st->lock);
+ return ret ? ret : IIO_VAL_INT;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ mutex_lock(&st->lock);
+ ret = sca3000_read_3db_freq(st, val);
+ mutex_unlock(&st->lock);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sca3000_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (val2)
+ return -EINVAL;
+ mutex_lock(&st->lock);
+ ret = sca3000_write_raw_samp_freq(st, val);
+ mutex_unlock(&st->lock);
+ return ret;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ if (val2)
+ return -EINVAL;
+ mutex_lock(&st->lock);
+ ret = sca3000_write_3db_freq(st, val);
+ mutex_unlock(&st->lock);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * sca3000_read_av_freq() - sysfs function to get available frequencies
+ * @dev: Device structure for this device.
+ * @attr: Description of the attribute.
+ * @buf: Incoming string
+ *
+ * The later modes are only relevant to the ring buffer - and depend on current
+ * mode. Note that data sheet gives rather wide tolerances for these so integer
+ * division will give good enough answer and not all chips have them specified
+ * at all.
+ **/
+static ssize_t sca3000_read_av_freq(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int len = 0, ret, val;
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ val = st->rx[0];
+ mutex_unlock(&st->lock);
+ if (ret)
+ goto error_ret;
+
+ switch (val & SCA3000_REG_MODE_MODE_MASK) {
+ case SCA3000_REG_MODE_MEAS_MODE_NORMAL:
+ len += sprintf(buf + len, "%d %d %d\n",
+ st->info->measurement_mode_freq,
+ st->info->measurement_mode_freq / 2,
+ st->info->measurement_mode_freq / 4);
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_1:
+ len += sprintf(buf + len, "%d %d %d\n",
+ st->info->option_mode_1_freq,
+ st->info->option_mode_1_freq / 2,
+ st->info->option_mode_1_freq / 4);
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_2:
+ len += sprintf(buf + len, "%d %d %d\n",
+ st->info->option_mode_2_freq,
+ st->info->option_mode_2_freq / 2,
+ st->info->option_mode_2_freq / 4);
+ break;
+ }
+ return len;
+error_ret:
+ return ret;
+}
+
+/*
+ * Should only really be registered if ring buffer support is compiled in.
+ * Does no harm however and doing it right would add a fair bit of complexity
+ */
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq);
+
+/*
+ * sca3000_read_event_value() - query of a threshold or period
+ */
+static int sca3000_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ long ret;
+ int i;
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ mutex_lock(&st->lock);
+ ret = sca3000_read_ctrl_reg(st,
+ sca3000_addresses[chan->address][1]);
+ mutex_unlock(&st->lock);
+ if (ret < 0)
+ return ret;
+ *val = 0;
+ if (chan->channel2 == IIO_MOD_Y)
+ for_each_set_bit(i, &ret,
+ ARRAY_SIZE(st->info->mot_det_mult_y))
+ *val += st->info->mot_det_mult_y[i];
+ else
+ for_each_set_bit(i, &ret,
+ ARRAY_SIZE(st->info->mot_det_mult_xz))
+ *val += st->info->mot_det_mult_xz[i];
+
+ return IIO_VAL_INT;
+ case IIO_EV_INFO_PERIOD:
+ *val = 0;
+ *val2 = 226000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * sca3000_write_event_value() - control of threshold and period
+ * @indio_dev: Device instance specific IIO information.
+ * @chan: Description of the channel for which the event is being
+ * configured.
+ * @type: The type of event being configured, here magnitude rising
+ * as everything else is read only.
+ * @dir: Direction of the event (here rising)
+ * @info: What information about the event are we configuring.
+ * Here the threshold only.
+ * @val: Integer part of the value being written..
+ * @val2: Non integer part of the value being written. Here always 0.
+ */
+static int sca3000_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+ int i;
+ u8 nonlinear = 0;
+
+ if (chan->channel2 == IIO_MOD_Y) {
+ i = ARRAY_SIZE(st->info->mot_det_mult_y);
+ while (i > 0)
+ if (val >= st->info->mot_det_mult_y[--i]) {
+ nonlinear |= (1 << i);
+ val -= st->info->mot_det_mult_y[i];
+ }
+ } else {
+ i = ARRAY_SIZE(st->info->mot_det_mult_xz);
+ while (i > 0)
+ if (val >= st->info->mot_det_mult_xz[--i]) {
+ nonlinear |= (1 << i);
+ val -= st->info->mot_det_mult_xz[i];
+ }
+ }
+
+ mutex_lock(&st->lock);
+ ret = sca3000_write_ctrl_reg(st,
+ sca3000_addresses[chan->address][1],
+ nonlinear);
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static struct attribute *sca3000_attributes[] = {
+ &iio_dev_attr_in_accel_filter_low_pass_3db_frequency_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group sca3000_attribute_group = {
+ .attrs = sca3000_attributes,
+};
+
+static int sca3000_read_data(struct sca3000_state *st,
+ u8 reg_address_high,
+ u8 *rx,
+ int len)
+{
+ int ret;
+ struct spi_transfer xfer[2] = {
+ {
+ .len = 1,
+ .tx_buf = st->tx,
+ }, {
+ .len = len,
+ .rx_buf = rx,
+ }
+ };
+
+ st->tx[0] = SCA3000_READ_REG(reg_address_high);
+ ret = spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
+ if (ret) {
+ dev_err(&st->us->dev, "problem reading register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * sca3000_ring_int_process() - ring specific interrupt handling.
+ * @val: Value of the interrupt status register.
+ * @indio_dev: Device instance specific IIO device structure.
+ */
+static void sca3000_ring_int_process(u8 val, struct iio_dev *indio_dev)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret, i, num_available;
+
+ mutex_lock(&st->lock);
+
+ if (val & SCA3000_REG_INT_STATUS_HALF) {
+ ret = sca3000_read_data_short(st, SCA3000_REG_BUF_COUNT_ADDR,
+ 1);
+ if (ret)
+ goto error_ret;
+ num_available = st->rx[0];
+ /*
+ * num_available is the total number of samples available
+ * i.e. number of time points * number of channels.
+ */
+ ret = sca3000_read_data(st, SCA3000_REG_RING_OUT_ADDR, st->rx,
+ num_available * 2);
+ if (ret)
+ goto error_ret;
+ for (i = 0; i < num_available / 3; i++) {
+ /*
+ * Dirty hack to cover for 11 bit in fifo, 13 bit
+ * direct reading.
+ *
+ * In theory the bottom two bits are undefined.
+ * In reality they appear to always be 0.
+ */
+ iio_push_to_buffers(indio_dev, st->rx + i * 3 * 2);
+ }
+ }
+error_ret:
+ mutex_unlock(&st->lock);
+}
+
+/**
+ * sca3000_event_handler() - handling ring and non ring events
+ * @irq: The irq being handled.
+ * @private: struct iio_device pointer for the device.
+ *
+ * Ring related interrupt handler. Depending on event, push to
+ * the ring buffer event chrdev or the event one.
+ *
+ * This function is complicated by the fact that the devices can signify ring
+ * and non ring events via the same interrupt line and they can only
+ * be distinguished via a read of the relevant status register.
+ */
+static irqreturn_t sca3000_event_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret, val;
+ s64 last_timestamp = iio_get_time_ns(indio_dev);
+
+ /*
+ * Could lead if badly timed to an extra read of status reg,
+ * but ensures no interrupt is missed.
+ */
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_STATUS_ADDR, 1);
+ val = st->rx[0];
+ mutex_unlock(&st->lock);
+ if (ret)
+ goto done;
+
+ sca3000_ring_int_process(val, indio_dev);
+
+ if (val & SCA3000_INT_STATUS_FREE_FALL)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_X_AND_Y_AND_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_FALLING),
+ last_timestamp);
+
+ if (val & SCA3000_INT_STATUS_Y_TRIGGER)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_Y,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ last_timestamp);
+
+ if (val & SCA3000_INT_STATUS_X_TRIGGER)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_X,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ last_timestamp);
+
+ if (val & SCA3000_INT_STATUS_Z_TRIGGER)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ last_timestamp);
+
+done:
+ return IRQ_HANDLED;
+}
+
+/*
+ * sca3000_read_event_config() what events are enabled
+ */
+static int sca3000_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+ /* read current value of mode register */
+ mutex_lock(&st->lock);
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+
+ switch (chan->channel2) {
+ case IIO_MOD_X_AND_Y_AND_Z:
+ ret = !!(st->rx[0] & SCA3000_REG_MODE_FREE_FALL_DETECT);
+ break;
+ case IIO_MOD_X:
+ case IIO_MOD_Y:
+ case IIO_MOD_Z:
+ /*
+ * Motion detection mode cannot run at the same time as
+ * acceleration data being read.
+ */
+ if ((st->rx[0] & SCA3000_REG_MODE_MODE_MASK)
+ != SCA3000_REG_MODE_MEAS_MODE_MOT_DET) {
+ ret = 0;
+ } else {
+ ret = sca3000_read_ctrl_reg(st,
+ SCA3000_REG_CTRL_SEL_MD_CTRL);
+ if (ret < 0)
+ goto error_ret;
+ /* only supporting logical or's for now */
+ ret = !!(ret & sca3000_addresses[chan->address][2]);
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+error_ret:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int sca3000_freefall_set_state(struct iio_dev *indio_dev, int state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ /* read current value of mode register */
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+
+ /* if off and should be on */
+ if (state && !(st->rx[0] & SCA3000_REG_MODE_FREE_FALL_DETECT))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ st->rx[0] | SCA3000_REG_MODE_FREE_FALL_DETECT);
+ /* if on and should be off */
+ else if (!state && (st->rx[0] & SCA3000_REG_MODE_FREE_FALL_DETECT))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ st->rx[0] & ~SCA3000_REG_MODE_FREE_FALL_DETECT);
+ else
+ return 0;
+}
+
+static int sca3000_motion_detect_set_state(struct iio_dev *indio_dev, int axis,
+ int state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret, ctrlval;
+
+ /*
+ * First read the motion detector config to find out if
+ * this axis is on
+ */
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL);
+ if (ret < 0)
+ return ret;
+ ctrlval = ret;
+ /* if off and should be on */
+ if (state && !(ctrlval & sca3000_addresses[axis][2])) {
+ ret = sca3000_write_ctrl_reg(st,
+ SCA3000_REG_CTRL_SEL_MD_CTRL,
+ ctrlval |
+ sca3000_addresses[axis][2]);
+ if (ret)
+ return ret;
+ st->mo_det_use_count++;
+ } else if (!state && (ctrlval & sca3000_addresses[axis][2])) {
+ ret = sca3000_write_ctrl_reg(st,
+ SCA3000_REG_CTRL_SEL_MD_CTRL,
+ ctrlval &
+ ~(sca3000_addresses[axis][2]));
+ if (ret)
+ return ret;
+ st->mo_det_use_count--;
+ }
+
+ /* read current value of mode register */
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+ /* if off and should be on */
+ if ((st->mo_det_use_count) &&
+ ((st->rx[0] & SCA3000_REG_MODE_MODE_MASK)
+ != SCA3000_REG_MODE_MEAS_MODE_MOT_DET))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ (st->rx[0] & ~SCA3000_REG_MODE_MODE_MASK)
+ | SCA3000_REG_MODE_MEAS_MODE_MOT_DET);
+ /* if on and should be off */
+ else if (!(st->mo_det_use_count) &&
+ ((st->rx[0] & SCA3000_REG_MODE_MODE_MASK)
+ == SCA3000_REG_MODE_MEAS_MODE_MOT_DET))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ st->rx[0] & SCA3000_REG_MODE_MODE_MASK);
+ else
+ return 0;
+}
+
+/**
+ * sca3000_write_event_config() - simple on off control for motion detector
+ * @indio_dev: IIO device instance specific structure. Data specific to this
+ * particular driver may be accessed via iio_priv(indio_dev).
+ * @chan: Description of the channel whose event we are configuring.
+ * @type: The type of event.
+ * @dir: The direction of the event.
+ * @state: Desired state of event being configured.
+ *
+ * This is a per axis control, but enabling any will result in the
+ * motion detector unit being enabled.
+ * N.B. enabling motion detector stops normal data acquisition.
+ * There is a complexity in knowing which mode to return to when
+ * this mode is disabled. Currently normal mode is assumed.
+ **/
+static int sca3000_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ int state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+ switch (chan->channel2) {
+ case IIO_MOD_X_AND_Y_AND_Z:
+ ret = sca3000_freefall_set_state(indio_dev, state);
+ break;
+
+ case IIO_MOD_X:
+ case IIO_MOD_Y:
+ case IIO_MOD_Z:
+ ret = sca3000_motion_detect_set_state(indio_dev,
+ chan->address,
+ state);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static inline
+int __sca3000_hw_ring_state_set(struct iio_dev *indio_dev, bool state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ if (state) {
+ dev_info(&indio_dev->dev, "supposedly enabling ring buffer\n");
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_MODE_ADDR,
+ (st->rx[0] | SCA3000_REG_MODE_RING_BUF_ENABLE));
+ } else
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_MODE_ADDR,
+ (st->rx[0] & ~SCA3000_REG_MODE_RING_BUF_ENABLE));
+error_ret:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+/**
+ * sca3000_hw_ring_preenable() - hw ring buffer preenable function
+ * @indio_dev: structure representing the IIO device. Device instance
+ * specific state can be accessed via iio_priv(indio_dev).
+ *
+ * Very simple enable function as the chip will allows normal reads
+ * during ring buffer operation so as long as it is indeed running
+ * before we notify the core, the precise ordering does not matter.
+ */
+static int sca3000_hw_ring_preenable(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&st->lock);
+
+ /* Enable the 50% full interrupt */
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto error_unlock;
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_INT_MASK_ADDR,
+ st->rx[0] | SCA3000_REG_INT_MASK_RING_HALF);
+ if (ret)
+ goto error_unlock;
+
+ mutex_unlock(&st->lock);
+
+ return __sca3000_hw_ring_state_set(indio_dev, 1);
+
+error_unlock:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int sca3000_hw_ring_postdisable(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ ret = __sca3000_hw_ring_state_set(indio_dev, 0);
+ if (ret)
+ return ret;
+
+ /* Disable the 50% full interrupt */
+ mutex_lock(&st->lock);
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto unlock;
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_INT_MASK_ADDR,
+ st->rx[0] & ~SCA3000_REG_INT_MASK_RING_HALF);
+unlock:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static const struct iio_buffer_setup_ops sca3000_ring_setup_ops = {
+ .preenable = &sca3000_hw_ring_preenable,
+ .postdisable = &sca3000_hw_ring_postdisable,
+};
+
+/**
+ * sca3000_clean_setup() - get the device into a predictable state
+ * @st: Device instance specific private data structure
+ *
+ * Devices use flash memory to store many of the register values
+ * and hence can come up in somewhat unpredictable states.
+ * Hence reset everything on driver load.
+ */
+static int sca3000_clean_setup(struct sca3000_state *st)
+{
+ int ret;
+
+ mutex_lock(&st->lock);
+ /* Ensure all interrupts have been acknowledged */
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_STATUS_ADDR, 1);
+ if (ret)
+ goto error_ret;
+
+ /* Turn off all motion detection channels */
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL);
+ if (ret < 0)
+ goto error_ret;
+ ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL,
+ ret & SCA3000_MD_CTRL_PROT_MASK);
+ if (ret)
+ goto error_ret;
+
+ /* Disable ring buffer */
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+ if (ret < 0)
+ goto error_ret;
+ ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL,
+ (ret & SCA3000_REG_OUT_CTRL_PROT_MASK)
+ | SCA3000_REG_OUT_CTRL_BUF_X_EN
+ | SCA3000_REG_OUT_CTRL_BUF_Y_EN
+ | SCA3000_REG_OUT_CTRL_BUF_Z_EN
+ | SCA3000_REG_OUT_CTRL_BUF_DIV_4);
+ if (ret)
+ goto error_ret;
+ /* Enable interrupts, relevant to mode and set up as active low */
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_INT_MASK_ADDR,
+ (ret & SCA3000_REG_INT_MASK_PROT_MASK)
+ | SCA3000_REG_INT_MASK_ACTIVE_LOW);
+ if (ret)
+ goto error_ret;
+ /*
+ * Select normal measurement mode, free fall off, ring off
+ * Ring in 12 bit mode - it is fine to overwrite reserved bits 3,5
+ * as that occurs in one of the example on the datasheet
+ */
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ (st->rx[0] & SCA3000_MODE_PROT_MASK));
+
+error_ret:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static const struct iio_info sca3000_info = {
+ .attrs = &sca3000_attribute_group,
+ .read_raw = &sca3000_read_raw,
+ .write_raw = &sca3000_write_raw,
+ .read_event_value = &sca3000_read_event_value,
+ .write_event_value = &sca3000_write_event_value,
+ .read_event_config = &sca3000_read_event_config,
+ .write_event_config = &sca3000_write_event_config,
+};
+
+static int sca3000_probe(struct spi_device *spi)
+{
+ int ret;
+ struct sca3000_state *st;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+ st->us = spi;
+ mutex_init(&st->lock);
+ st->info = &sca3000_spi_chip_info_tbl[spi_get_device_id(spi)
+ ->driver_data];
+
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->info = &sca3000_info;
+ if (st->info->temp_output) {
+ indio_dev->channels = sca3000_channels_with_temp;
+ indio_dev->num_channels =
+ ARRAY_SIZE(sca3000_channels_with_temp);
+ } else {
+ indio_dev->channels = sca3000_channels;
+ indio_dev->num_channels = ARRAY_SIZE(sca3000_channels);
+ }
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = devm_iio_kfifo_buffer_setup(&spi->dev, indio_dev,
+ &sca3000_ring_setup_ops);
+ if (ret)
+ return ret;
+
+ if (spi->irq) {
+ ret = request_threaded_irq(spi->irq,
+ NULL,
+ &sca3000_event_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "sca3000",
+ indio_dev);
+ if (ret)
+ return ret;
+ }
+ ret = sca3000_clean_setup(st);
+ if (ret)
+ goto error_free_irq;
+
+ ret = sca3000_print_rev(indio_dev);
+ if (ret)
+ goto error_free_irq;
+
+ return iio_device_register(indio_dev);
+
+error_free_irq:
+ if (spi->irq)
+ free_irq(spi->irq, indio_dev);
+
+ return ret;
+}
+
+static int sca3000_stop_all_interrupts(struct sca3000_state *st)
+{
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_write_reg(st, SCA3000_REG_INT_MASK_ADDR,
+ (st->rx[0] &
+ ~(SCA3000_REG_INT_MASK_RING_THREE_QUARTER |
+ SCA3000_REG_INT_MASK_RING_HALF |
+ SCA3000_REG_INT_MASK_ALL_INTS)));
+error_ret:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static void sca3000_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ /* Must ensure no interrupts can be generated after this! */
+ sca3000_stop_all_interrupts(st);
+ if (spi->irq)
+ free_irq(spi->irq, indio_dev);
+}
+
+static const struct spi_device_id sca3000_id[] = {
+ {"sca3000_d01", d01},
+ {"sca3000_e02", e02},
+ {"sca3000_e04", e04},
+ {"sca3000_e05", e05},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, sca3000_id);
+
+static struct spi_driver sca3000_driver = {
+ .driver = {
+ .name = "sca3000",
+ },
+ .probe = sca3000_probe,
+ .remove = sca3000_remove,
+ .id_table = sca3000_id,
+};
+module_spi_driver(sca3000_driver);
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
+MODULE_DESCRIPTION("VTI SCA3000 Series Accelerometers SPI driver");
+MODULE_LICENSE("GPL v2");