diff options
Diffstat (limited to 'drivers/iio/amplifiers')
| -rw-r--r-- | drivers/iio/amplifiers/Kconfig | 47 | ||||
| -rw-r--r-- | drivers/iio/amplifiers/Makefile | 9 | ||||
| -rw-r--r-- | drivers/iio/amplifiers/ad8366.c | 335 | ||||
| -rw-r--r-- | drivers/iio/amplifiers/ada4250.c | 403 | ||||
| -rw-r--r-- | drivers/iio/amplifiers/hmc425a.c | 244 |
5 files changed, 1038 insertions, 0 deletions
diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig new file mode 100644 index 000000000..f217a2a1e --- /dev/null +++ b/drivers/iio/amplifiers/Kconfig @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Gain Amplifiers, etc. +# +# When adding new entries keep the list in alphabetical order + +menu "Amplifiers" + +config AD8366 + tristate "Analog Devices AD8366 and similar Gain Amplifiers" + depends on SPI + depends on GPIOLIB + select BITREVERSE + help + Say yes here to build support for Analog Devices AD8366 and similar + gain amplifiers. This driver supports the following gain amplifiers + from Analog Devices: + AD8366 Dual-Digital Variable Gain Amplifier (VGA) + ADA4961 BiCMOS RF Digital Gain Amplifier (DGA) + ADL5240 Digitally controlled variable gain amplifier (VGA) + HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator + + To compile this driver as a module, choose M here: the + module will be called ad8366. + +config ADA4250 + tristate "Analog Devices ADA4250 Instrumentation Amplifier" + depends on SPI + help + Say yes here to build support for Analog Devices ADA4250 + SPI Amplifier's support. The driver provides direct access via + sysfs. + + To compile this driver as a module, choose M here: the + module will be called ada4250. + +config HMC425 + tristate "Analog Devices HMC425A and similar GPIO Gain Amplifiers" + depends on GPIOLIB + help + Say yes here to build support for Analog Devices HMC425A and similar + gain amplifiers or step attenuators. + + To compile this driver as a module, choose M here: the + module will be called hmc425a. + +endmenu diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile new file mode 100644 index 000000000..212633112 --- /dev/null +++ b/drivers/iio/amplifiers/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile iio/amplifiers +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AD8366) += ad8366.o +obj-$(CONFIG_ADA4250) += ada4250.o +obj-$(CONFIG_HMC425) += hmc425a.o diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c new file mode 100644 index 000000000..f2c2ea79a --- /dev/null +++ b/drivers/iio/amplifiers/ad8366.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD8366 and similar Gain Amplifiers + * This driver supports the following gain amplifiers: + * AD8366 Dual-Digital Variable Gain Amplifier (VGA) + * ADA4961 BiCMOS RF Digital Gain Amplifier (DGA) + * ADL5240 Digitally controlled variable gain amplifier (VGA) + * HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator + * + * Copyright 2012-2019 Analog Devices Inc. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/bitrev.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +enum ad8366_type { + ID_AD8366, + ID_ADA4961, + ID_ADL5240, + ID_HMC1119, +}; + +struct ad8366_info { + int gain_min; + int gain_max; +}; + +struct ad8366_state { + struct spi_device *spi; + struct regulator *reg; + struct mutex lock; /* protect sensor state */ + struct gpio_desc *reset_gpio; + unsigned char ch[2]; + enum ad8366_type type; + struct ad8366_info *info; + /* + * DMA (thus cache coherency maintenance) may require the + * transfer buffers to live in their own cache lines. + */ + unsigned char data[2] __aligned(IIO_DMA_MINALIGN); +}; + +static struct ad8366_info ad8366_infos[] = { + [ID_AD8366] = { + .gain_min = 4500, + .gain_max = 20500, + }, + [ID_ADA4961] = { + .gain_min = -6000, + .gain_max = 15000, + }, + [ID_ADL5240] = { + .gain_min = -11500, + .gain_max = 20000, + }, + [ID_HMC1119] = { + .gain_min = -31750, + .gain_max = 0, + }, +}; + +static int ad8366_write(struct iio_dev *indio_dev, + unsigned char ch_a, unsigned char ch_b) +{ + struct ad8366_state *st = iio_priv(indio_dev); + int ret; + + switch (st->type) { + case ID_AD8366: + ch_a = bitrev8(ch_a & 0x3F); + ch_b = bitrev8(ch_b & 0x3F); + + st->data[0] = ch_b >> 4; + st->data[1] = (ch_b << 4) | (ch_a >> 2); + break; + case ID_ADA4961: + st->data[0] = ch_a & 0x1F; + break; + case ID_ADL5240: + st->data[0] = (ch_a & 0x3F); + break; + case ID_HMC1119: + st->data[0] = ch_a; + break; + } + + ret = spi_write(st->spi, st->data, indio_dev->num_channels); + if (ret < 0) + dev_err(&indio_dev->dev, "write failed (%d)", ret); + + return ret; +} + +static int ad8366_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ad8366_state *st = iio_priv(indio_dev); + int ret; + int code, gain = 0; + + mutex_lock(&st->lock); + switch (m) { + case IIO_CHAN_INFO_HARDWAREGAIN: + code = st->ch[chan->channel]; + + switch (st->type) { + case ID_AD8366: + gain = code * 253 + 4500; + break; + case ID_ADA4961: + gain = 15000 - code * 1000; + break; + case ID_ADL5240: + gain = 20000 - 31500 + code * 500; + break; + case ID_HMC1119: + gain = -1 * code * 250; + break; + } + + /* Values in dB */ + *val = gain / 1000; + *val2 = (gain % 1000) * 1000; + + ret = IIO_VAL_INT_PLUS_MICRO_DB; + break; + default: + ret = -EINVAL; + } + mutex_unlock(&st->lock); + + return ret; +}; + +static int ad8366_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad8366_state *st = iio_priv(indio_dev); + struct ad8366_info *inf = st->info; + int code = 0, gain; + int ret; + + /* Values in dB */ + if (val < 0) + gain = (val * 1000) - (val2 / 1000); + else + gain = (val * 1000) + (val2 / 1000); + + if (gain > inf->gain_max || gain < inf->gain_min) + return -EINVAL; + + switch (st->type) { + case ID_AD8366: + code = (gain - 4500) / 253; + break; + case ID_ADA4961: + code = (15000 - gain) / 1000; + break; + case ID_ADL5240: + code = ((gain - 500 - 20000) / 500) & 0x3F; + break; + case ID_HMC1119: + code = (abs(gain) / 250) & 0x7F; + break; + } + + mutex_lock(&st->lock); + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + st->ch[chan->channel] = code; + ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]); + break; + default: + ret = -EINVAL; + } + mutex_unlock(&st->lock); + + return ret; +} + +static int ad8366_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + return IIO_VAL_INT_PLUS_MICRO_DB; + default: + return -EINVAL; + } +} + +static const struct iio_info ad8366_info = { + .read_raw = &ad8366_read_raw, + .write_raw = &ad8366_write_raw, + .write_raw_get_fmt = &ad8366_write_raw_get_fmt, +}; + +#define AD8366_CHAN(_channel) { \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .indexed = 1, \ + .channel = _channel, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),\ +} + +static const struct iio_chan_spec ad8366_channels[] = { + AD8366_CHAN(0), + AD8366_CHAN(1), +}; + +static const struct iio_chan_spec ada4961_channels[] = { + AD8366_CHAN(0), +}; + +static int ad8366_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct ad8366_state *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (indio_dev == NULL) + return -ENOMEM; + + st = iio_priv(indio_dev); + + st->reg = devm_regulator_get(&spi->dev, "vcc"); + if (!IS_ERR(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + return ret; + } + + spi_set_drvdata(spi, indio_dev); + mutex_init(&st->lock); + st->spi = spi; + st->type = spi_get_device_id(spi)->driver_data; + + switch (st->type) { + case ID_AD8366: + indio_dev->channels = ad8366_channels; + indio_dev->num_channels = ARRAY_SIZE(ad8366_channels); + break; + case ID_ADA4961: + case ID_ADL5240: + case ID_HMC1119: + st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(st->reset_gpio)) { + ret = PTR_ERR(st->reset_gpio); + goto error_disable_reg; + } + indio_dev->channels = ada4961_channels; + indio_dev->num_channels = ARRAY_SIZE(ada4961_channels); + break; + default: + dev_err(&spi->dev, "Invalid device ID\n"); + ret = -EINVAL; + goto error_disable_reg; + } + + st->info = &ad8366_infos[st->type]; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->info = &ad8366_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = ad8366_write(indio_dev, 0 , 0); + if (ret < 0) + goto error_disable_reg; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_disable_reg; + + return 0; + +error_disable_reg: + if (!IS_ERR(st->reg)) + regulator_disable(st->reg); + + return ret; +} + +static void ad8366_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ad8366_state *st = iio_priv(indio_dev); + struct regulator *reg = st->reg; + + iio_device_unregister(indio_dev); + + if (!IS_ERR(reg)) + regulator_disable(reg); +} + +static const struct spi_device_id ad8366_id[] = { + {"ad8366", ID_AD8366}, + {"ada4961", ID_ADA4961}, + {"adl5240", ID_ADL5240}, + {"hmc1119", ID_HMC1119}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad8366_id); + +static struct spi_driver ad8366_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = ad8366_probe, + .remove = ad8366_remove, + .id_table = ad8366_id, +}; + +module_spi_driver(ad8366_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD8366 and similar Gain Amplifiers"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/amplifiers/ada4250.c b/drivers/iio/amplifiers/ada4250.c new file mode 100644 index 000000000..4b32d350d --- /dev/null +++ b/drivers/iio/amplifiers/ada4250.c @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ADA4250 driver + * + * Copyright 2022 Analog Devices Inc. + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/device.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <asm/unaligned.h> + +/* ADA4250 Register Map */ +#define ADA4250_REG_GAIN_MUX 0x00 +#define ADA4250_REG_REFBUF_EN 0x01 +#define ADA4250_REG_RESET 0x02 +#define ADA4250_REG_SNSR_CAL_VAL 0x04 +#define ADA4250_REG_SNSR_CAL_CNFG 0x05 +#define ADA4250_REG_DIE_REV 0x18 +#define ADA4250_REG_CHIP_ID 0x19 + +/* ADA4250_REG_GAIN_MUX Map */ +#define ADA4250_GAIN_MUX_MSK GENMASK(2, 0) + +/* ADA4250_REG_REFBUF Map */ +#define ADA4250_REFBUF_MSK BIT(0) + +/* ADA4250_REG_RESET Map */ +#define ADA4250_RESET_MSK BIT(0) + +/* ADA4250_REG_SNSR_CAL_VAL Map */ +#define ADA4250_CAL_CFG_BIAS_MSK GENMASK(7, 0) + +/* ADA4250_REG_SNSR_CAL_CNFG Bit Definition */ +#define ADA4250_BIAS_SET_MSK GENMASK(3, 2) +#define ADA4250_RANGE_SET_MSK GENMASK(1, 0) + +/* Miscellaneous definitions */ +#define ADA4250_CHIP_ID 0x4250 +#define ADA4250_RANGE1 0 +#define ADA4250_RANGE4 3 + +/* ADA4250 current bias set */ +enum ada4250_current_bias { + ADA4250_BIAS_DISABLED, + ADA4250_BIAS_BANDGAP, + ADA4250_BIAS_AVDD, +}; + +struct ada4250_state { + struct spi_device *spi; + struct regmap *regmap; + struct regulator *reg; + /* Protect against concurrent accesses to the device and data content */ + struct mutex lock; + u8 bias; + u8 gain; + int offset_uv; + bool refbuf_en; +}; + +/* ADA4250 Current Bias Source Settings: Disabled, Bandgap Reference, AVDD */ +static const int calibbias_table[] = {0, 1, 2}; + +/* ADA4250 Gain (V/V) values: 1, 2, 4, 8, 16, 32, 64, 128 */ +static const int hwgain_table[] = {1, 2, 4, 8, 16, 32, 64, 128}; + +static const struct regmap_config ada4250_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = BIT(7), + .max_register = 0x1A, +}; + +static int ada4250_set_offset_uv(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int offset_uv) +{ + struct ada4250_state *st = iio_priv(indio_dev); + + int i, ret, x[8], max_vos, min_vos, voltage_v, vlsb = 0; + u8 offset_raw, range = ADA4250_RANGE1; + u32 lsb_coeff[6] = {1333, 2301, 4283, 8289, 16311, 31599}; + + if (st->bias == 0 || st->bias == 3) + return -EINVAL; + + voltage_v = regulator_get_voltage(st->reg); + voltage_v = DIV_ROUND_CLOSEST(voltage_v, 1000000); + + if (st->bias == ADA4250_BIAS_AVDD) + x[0] = voltage_v; + else + x[0] = 5; + + x[1] = 126 * (x[0] - 1); + + for (i = 0; i < 6; i++) + x[i + 2] = DIV_ROUND_CLOSEST(x[1] * 1000, lsb_coeff[i]); + + if (st->gain == 0) + return -EINVAL; + + /* + * Compute Range and Voltage per LSB for the Sensor Offset Calibration + * Example of computation for Range 1 and Range 2 (Curren Bias Set = AVDD): + * Range 1 Range 2 + * Gain | Max Vos(mV) | LSB(mV) | Max Vos(mV) | LSB(mV) | + * 2 | X1*127 | X1=0.126(AVDD-1) | X1*3*127 | X1*3 | + * 4 | X2*127 | X2=X1/1.3333 | X2*3*127 | X2*3 | + * 8 | X3*127 | X3=X1/2.301 | X3*3*127 | X3*3 | + * 16 | X4*127 | X4=X1/4.283 | X4*3*127 | X4*3 | + * 32 | X5*127 | X5=X1/8.289 | X5*3*127 | X5*3 | + * 64 | X6*127 | X6=X1/16.311 | X6*3*127 | X6*3 | + * 128 | X7*127 | X7=X1/31.599 | X7*3*127 | X7*3 | + */ + for (i = ADA4250_RANGE1; i <= ADA4250_RANGE4; i++) { + max_vos = x[st->gain] * 127 * ((1 << (i + 1)) - 1); + min_vos = -1 * max_vos; + if (offset_uv > min_vos && offset_uv < max_vos) { + range = i; + vlsb = x[st->gain] * ((1 << (i + 1)) - 1); + break; + } + } + + if (vlsb <= 0) + return -EINVAL; + + offset_raw = DIV_ROUND_CLOSEST(abs(offset_uv), vlsb); + + mutex_lock(&st->lock); + ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, + ADA4250_RANGE_SET_MSK, + FIELD_PREP(ADA4250_RANGE_SET_MSK, range)); + if (ret) + goto exit; + + st->offset_uv = offset_raw * vlsb; + + /* + * To set the offset calibration value, use bits [6:0] and bit 7 as the + * polarity bit (set to "0" for a negative offset and "1" for a positive + * offset). + */ + if (offset_uv < 0) { + offset_raw |= BIT(7); + st->offset_uv *= (-1); + } + + ret = regmap_write(st->regmap, ADA4250_REG_SNSR_CAL_VAL, offset_raw); + +exit: + mutex_unlock(&st->lock); + + return ret; +} + +static int ada4250_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long info) +{ + struct ada4250_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_HARDWAREGAIN: + ret = regmap_read(st->regmap, ADA4250_REG_GAIN_MUX, val); + if (ret) + return ret; + + *val = BIT(*val); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + *val = st->offset_uv; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBBIAS: + ret = regmap_read(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, val); + if (ret) + return ret; + + *val = FIELD_GET(ADA4250_BIAS_SET_MSK, *val); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 1; + *val2 = 1000000; + + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } +} + +static int ada4250_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + struct ada4250_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_HARDWAREGAIN: + ret = regmap_write(st->regmap, ADA4250_REG_GAIN_MUX, + FIELD_PREP(ADA4250_GAIN_MUX_MSK, ilog2(val))); + if (ret) + return ret; + + st->gain = ilog2(val); + + return ret; + case IIO_CHAN_INFO_OFFSET: + return ada4250_set_offset_uv(indio_dev, chan, val); + case IIO_CHAN_INFO_CALIBBIAS: + ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, + ADA4250_BIAS_SET_MSK, + FIELD_PREP(ADA4250_BIAS_SET_MSK, val)); + if (ret) + return ret; + + st->bias = val; + + return ret; + default: + return -EINVAL; + } +} + +static int ada4250_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_CALIBBIAS: + *vals = calibbias_table; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(calibbias_table); + + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_HARDWAREGAIN: + *vals = hwgain_table; + *type = IIO_VAL_INT; + *length = ARRAY_SIZE(hwgain_table); + + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int ada4250_reg_access(struct iio_dev *indio_dev, + unsigned int reg, + unsigned int write_val, + unsigned int *read_val) +{ + struct ada4250_state *st = iio_priv(indio_dev); + + if (read_val) + return regmap_read(st->regmap, reg, read_val); + else + return regmap_write(st->regmap, reg, write_val); +} + +static const struct iio_info ada4250_info = { + .read_raw = ada4250_read_raw, + .write_raw = ada4250_write_raw, + .read_avail = &ada4250_read_avail, + .debugfs_reg_access = &ada4250_reg_access, +}; + +static const struct iio_chan_spec ada4250_channels[] = { + { + .type = IIO_VOLTAGE, + .output = 1, + .indexed = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_CALIBBIAS) | + BIT(IIO_CHAN_INFO_HARDWAREGAIN), + } +}; + +static void ada4250_reg_disable(void *data) +{ + regulator_disable(data); +} + +static int ada4250_init(struct ada4250_state *st) +{ + int ret; + u16 chip_id; + u8 data[2] __aligned(8) = {}; + struct spi_device *spi = st->spi; + + st->refbuf_en = device_property_read_bool(&spi->dev, "adi,refbuf-enable"); + + st->reg = devm_regulator_get(&spi->dev, "avdd"); + if (IS_ERR(st->reg)) + return dev_err_probe(&spi->dev, PTR_ERR(st->reg), + "failed to get the AVDD voltage\n"); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified AVDD supply\n"); + return ret; + } + + ret = devm_add_action_or_reset(&spi->dev, ada4250_reg_disable, st->reg); + if (ret) + return ret; + + ret = regmap_write(st->regmap, ADA4250_REG_RESET, + FIELD_PREP(ADA4250_RESET_MSK, 1)); + if (ret) + return ret; + + ret = regmap_bulk_read(st->regmap, ADA4250_REG_CHIP_ID, data, 2); + if (ret) + return ret; + + chip_id = get_unaligned_le16(data); + + if (chip_id != ADA4250_CHIP_ID) { + dev_err(&spi->dev, "Invalid chip ID.\n"); + return -EINVAL; + } + + return regmap_write(st->regmap, ADA4250_REG_REFBUF_EN, + FIELD_PREP(ADA4250_REFBUF_MSK, st->refbuf_en)); +} + +static int ada4250_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct regmap *regmap; + struct ada4250_state *st; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + regmap = devm_regmap_init_spi(spi, &ada4250_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + st = iio_priv(indio_dev); + st->regmap = regmap; + st->spi = spi; + + indio_dev->info = &ada4250_info; + indio_dev->name = "ada4250"; + indio_dev->channels = ada4250_channels; + indio_dev->num_channels = ARRAY_SIZE(ada4250_channels); + + mutex_init(&st->lock); + + ret = ada4250_init(st); + if (ret) { + dev_err(&spi->dev, "ADA4250 init failed\n"); + return ret; + } + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id ada4250_id[] = { + { "ada4250", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, ada4250_id); + +static const struct of_device_id ada4250_of_match[] = { + { .compatible = "adi,ada4250" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ada4250_of_match); + +static struct spi_driver ada4250_driver = { + .driver = { + .name = "ada4250", + .of_match_table = ada4250_of_match, + }, + .probe = ada4250_probe, + .id_table = ada4250_id, +}; +module_spi_driver(ada4250_driver); + +MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com"); +MODULE_DESCRIPTION("Analog Devices ADA4250"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c new file mode 100644 index 000000000..ce80e0c91 --- /dev/null +++ b/drivers/iio/amplifiers/hmc425a.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * HMC425A and similar Gain Amplifiers + * + * Copyright 2020 Analog Devices Inc. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/sysfs.h> + +enum hmc425a_type { + ID_HMC425A, +}; + +struct hmc425a_chip_info { + const char *name; + const struct iio_chan_spec *channels; + unsigned int num_channels; + unsigned int num_gpios; + int gain_min; + int gain_max; + int default_gain; +}; + +struct hmc425a_state { + struct regulator *reg; + struct mutex lock; /* protect sensor state */ + struct hmc425a_chip_info *chip_info; + struct gpio_descs *gpios; + enum hmc425a_type type; + u32 gain; +}; + +static int hmc425a_write(struct iio_dev *indio_dev, u32 value) +{ + struct hmc425a_state *st = iio_priv(indio_dev); + DECLARE_BITMAP(values, BITS_PER_TYPE(value)); + + values[0] = value; + + gpiod_set_array_value_cansleep(st->gpios->ndescs, st->gpios->desc, + NULL, values); + return 0; +} + +static int hmc425a_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long m) +{ + struct hmc425a_state *st = iio_priv(indio_dev); + int code, gain = 0; + int ret; + + mutex_lock(&st->lock); + switch (m) { + case IIO_CHAN_INFO_HARDWAREGAIN: + code = st->gain; + + switch (st->type) { + case ID_HMC425A: + gain = ~code * -500; + break; + } + + *val = gain / 1000; + *val2 = (gain % 1000) * 1000; + + ret = IIO_VAL_INT_PLUS_MICRO_DB; + break; + default: + ret = -EINVAL; + } + mutex_unlock(&st->lock); + + return ret; +}; + +static int hmc425a_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct hmc425a_state *st = iio_priv(indio_dev); + struct hmc425a_chip_info *inf = st->chip_info; + int code = 0, gain; + int ret; + + if (val < 0) + gain = (val * 1000) - (val2 / 1000); + else + gain = (val * 1000) + (val2 / 1000); + + if (gain > inf->gain_max || gain < inf->gain_min) + return -EINVAL; + + switch (st->type) { + case ID_HMC425A: + code = ~((abs(gain) / 500) & 0x3F); + break; + } + + mutex_lock(&st->lock); + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + st->gain = code; + + ret = hmc425a_write(indio_dev, st->gain); + break; + default: + ret = -EINVAL; + } + mutex_unlock(&st->lock); + + return ret; +} + +static int hmc425a_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + return IIO_VAL_INT_PLUS_MICRO_DB; + default: + return -EINVAL; + } +} + +static const struct iio_info hmc425a_info = { + .read_raw = &hmc425a_read_raw, + .write_raw = &hmc425a_write_raw, + .write_raw_get_fmt = &hmc425a_write_raw_get_fmt, +}; + +#define HMC425A_CHAN(_channel) \ +{ \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .indexed = 1, \ + .channel = _channel, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ +} + +static const struct iio_chan_spec hmc425a_channels[] = { + HMC425A_CHAN(0), +}; + +/* Match table for of_platform binding */ +static const struct of_device_id hmc425a_of_match[] = { + { .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A }, + {}, +}; +MODULE_DEVICE_TABLE(of, hmc425a_of_match); + +static void hmc425a_reg_disable(void *data) +{ + struct hmc425a_state *st = data; + + regulator_disable(st->reg); +} + +static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { + [ID_HMC425A] = { + .name = "hmc425a", + .channels = hmc425a_channels, + .num_channels = ARRAY_SIZE(hmc425a_channels), + .num_gpios = 6, + .gain_min = -31500, + .gain_max = 0, + .default_gain = -0x40, /* set default gain -31.5db*/ + }, +}; + +static int hmc425a_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct hmc425a_state *st; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->type = (uintptr_t)device_get_match_data(&pdev->dev); + + st->chip_info = &hmc425a_chip_info_tbl[st->type]; + indio_dev->num_channels = st->chip_info->num_channels; + indio_dev->channels = st->chip_info->channels; + indio_dev->name = st->chip_info->name; + st->gain = st->chip_info->default_gain; + + st->gpios = devm_gpiod_get_array(&pdev->dev, "ctrl", GPIOD_OUT_LOW); + if (IS_ERR(st->gpios)) + return dev_err_probe(&pdev->dev, PTR_ERR(st->gpios), + "failed to get gpios\n"); + + if (st->gpios->ndescs != st->chip_info->num_gpios) { + dev_err(&pdev->dev, "%d GPIOs needed to operate\n", + st->chip_info->num_gpios); + return -ENODEV; + } + + st->reg = devm_regulator_get(&pdev->dev, "vcc-supply"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + ret = regulator_enable(st->reg); + if (ret) + return ret; + ret = devm_add_action_or_reset(&pdev->dev, hmc425a_reg_disable, st); + if (ret) + return ret; + + mutex_init(&st->lock); + + indio_dev->info = &hmc425a_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(&pdev->dev, indio_dev); +} + +static struct platform_driver hmc425a_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = hmc425a_of_match, + }, + .probe = hmc425a_probe, +}; +module_platform_driver(hmc425a_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices HMC425A and similar GPIO control Gain Amplifiers"); +MODULE_LICENSE("GPL v2"); |