summaryrefslogtreecommitdiffstats
path: root/drivers/iio/imu/inv_mpu6050
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/imu/inv_mpu6050')
-rw-r--r--drivers/iio/imu/inv_mpu6050/Kconfig34
-rw-r--r--drivers/iio/imu/inv_mpu6050/Makefile14
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c198
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c204
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h19
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c1778
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c278
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h474
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c365
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h39
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c208
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c165
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c251
13 files changed, 4027 insertions, 0 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
new file mode 100644
index 000000000..3636b1bc9
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# inv-mpu6050 drivers for Invensense MPU devices and combos
+#
+
+config INV_MPU6050_IIO
+ tristate
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+config INV_MPU6050_I2C
+ tristate "Invensense MPU6050 devices (I2C)"
+ depends on I2C
+ select I2C_MUX
+ select INV_MPU6050_IIO
+ select REGMAP_I2C
+ help
+ This driver supports the Invensense MPU6050/9150,
+ MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20602/ICM20690
+ and IAM20680 motion tracking devices over I2C.
+ This driver can be built as a module. The module will be called
+ inv-mpu6050-i2c.
+
+config INV_MPU6050_SPI
+ tristate "Invensense MPU6050 devices (SPI)"
+ depends on SPI_MASTER
+ select INV_MPU6050_IIO
+ select REGMAP_SPI
+ help
+ This driver supports the Invensense MPU6000,
+ MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20602/ICM20690
+ and IAM20680 motion tracking devices over SPI.
+ This driver can be built as a module. The module will be called
+ inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile
new file mode 100644
index 000000000..c103441a9
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Invensense MPU6050 device.
+#
+
+obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o
+inv-mpu6050-y := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o \
+ inv_mpu_aux.o inv_mpu_magn.o
+
+obj-$(CONFIG_INV_MPU6050_I2C) += inv-mpu6050-i2c.o
+inv-mpu6050-i2c-y := inv_mpu_i2c.o inv_mpu_acpi.o
+
+obj-$(CONFIG_INV_MPU6050_SPI) += inv-mpu6050-spi.o
+inv-mpu6050-spi-y := inv_mpu_spi.o
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
new file mode 100644
index 000000000..f7bce428d
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * inv_mpu_acpi: ACPI processing for creating client devices
+ * Copyright (c) 2015, Intel Corporation.
+ */
+
+#ifdef CONFIG_ACPI
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include "inv_mpu_iio.h"
+
+enum inv_mpu_product_name {
+ INV_MPU_NOT_MATCHED,
+ INV_MPU_ASUS_T100TA,
+};
+
+static enum inv_mpu_product_name matched_product_name;
+
+static int __init asus_t100_matched(const struct dmi_system_id *d)
+{
+ matched_product_name = INV_MPU_ASUS_T100TA;
+
+ return 0;
+}
+
+static const struct dmi_system_id inv_mpu_dev_list[] = {
+ {
+ .callback = asus_t100_matched,
+ .ident = "Asus Transformer Book T100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
+ },
+ },
+ /* Add more matching tables here..*/
+ {}
+};
+
+static int asus_acpi_get_sensor_info(struct acpi_device *adev,
+ struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ int i;
+ acpi_status status;
+ union acpi_object *cpm;
+ int ret;
+
+ status = acpi_evaluate_object(adev->handle, "CNF0", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ cpm = buffer.pointer;
+ for (i = 0; i < cpm->package.count; ++i) {
+ union acpi_object *elem;
+ int j;
+
+ elem = &cpm->package.elements[i];
+ for (j = 0; j < elem->package.count; ++j) {
+ union acpi_object *sub_elem;
+
+ sub_elem = &elem->package.elements[j];
+ if (sub_elem->type == ACPI_TYPE_STRING)
+ strscpy(info->type, sub_elem->string.pointer,
+ sizeof(info->type));
+ else if (sub_elem->type == ACPI_TYPE_INTEGER) {
+ if (sub_elem->integer.value != client->addr) {
+ info->addr = sub_elem->integer.value;
+ break; /* Not a MPU6500 primary */
+ }
+ }
+ }
+ }
+ ret = cpm->package.count;
+ kfree(buffer.pointer);
+
+ return ret;
+}
+
+static int acpi_i2c_check_resource(struct acpi_resource *ares, void *data)
+{
+ struct acpi_resource_i2c_serialbus *sb;
+ u32 *addr = data;
+
+ if (i2c_acpi_get_i2c_resource(ares, &sb)) {
+ if (*addr)
+ *addr |= (sb->slave_address << 16);
+ else
+ *addr = sb->slave_address;
+ }
+
+ /* Tell the ACPI core that we already copied this address */
+ return 1;
+}
+
+static int inv_mpu_process_acpi_config(struct i2c_client *client,
+ unsigned short *primary_addr,
+ unsigned short *secondary_addr)
+{
+ struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+ const struct acpi_device_id *id;
+ u32 i2c_addr = 0;
+ LIST_HEAD(resources);
+ int ret;
+
+ id = acpi_match_device(client->dev.driver->acpi_match_table,
+ &client->dev);
+ if (!id)
+ return -ENODEV;
+
+ ret = acpi_dev_get_resources(adev, &resources,
+ acpi_i2c_check_resource, &i2c_addr);
+ if (ret < 0)
+ return ret;
+
+ acpi_dev_free_resource_list(&resources);
+ *primary_addr = i2c_addr & 0x0000ffff;
+ *secondary_addr = (i2c_addr & 0xffff0000) >> 16;
+
+ return 0;
+}
+
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
+ struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+
+ st->mux_client = NULL;
+ if (adev) {
+ struct i2c_board_info info;
+ struct i2c_client *mux_client;
+ int ret = -1;
+
+ memset(&info, 0, sizeof(info));
+
+ dmi_check_system(inv_mpu_dev_list);
+ switch (matched_product_name) {
+ case INV_MPU_ASUS_T100TA:
+ ret = asus_acpi_get_sensor_info(adev, client,
+ &info);
+ break;
+ /* Add more matched product processing here */
+ default:
+ break;
+ }
+
+ if (ret < 0) {
+ /* No matching DMI, so create device on INV6XX type */
+ unsigned short primary, secondary;
+
+ ret = inv_mpu_process_acpi_config(client, &primary,
+ &secondary);
+ if (!ret && secondary) {
+ char *name;
+
+ info.addr = secondary;
+ strscpy(info.type, dev_name(&adev->dev),
+ sizeof(info.type));
+ name = strchr(info.type, ':');
+ if (name)
+ *name = '\0';
+ strlcat(info.type, "-client",
+ sizeof(info.type));
+ } else
+ return 0; /* no secondary addr, which is OK */
+ }
+ mux_client = i2c_new_client_device(st->muxc->adapter[0], &info);
+ if (IS_ERR(mux_client))
+ return PTR_ERR(mux_client);
+ st->mux_client = mux_client;
+ }
+
+ return 0;
+}
+
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
+
+ i2c_unregister_device(st->mux_client);
+}
+#else
+
+#include "inv_mpu_iio.h"
+
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
+{
+ return 0;
+}
+
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
+{
+}
+#endif
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
new file mode 100644
index 000000000..7327e5723
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+
+#include "inv_mpu_aux.h"
+#include "inv_mpu_iio.h"
+
+/*
+ * i2c master auxiliary bus transfer function.
+ * Requires the i2c operations to be correctly setup before.
+ */
+static int inv_mpu_i2c_master_xfer(const struct inv_mpu6050_state *st)
+{
+ /* use 50hz frequency for xfer */
+ const unsigned int freq = 50;
+ const unsigned int period_ms = 1000 / freq;
+ uint8_t d;
+ unsigned int user_ctrl;
+ int ret;
+
+ /* set sample rate */
+ d = INV_MPU6050_FIFO_RATE_TO_DIVIDER(freq);
+ ret = regmap_write(st->map, st->reg->sample_rate_div, d);
+ if (ret)
+ return ret;
+
+ /* start i2c master */
+ user_ctrl = st->chip_config.user_ctrl | INV_MPU6050_BIT_I2C_MST_EN;
+ ret = regmap_write(st->map, st->reg->user_ctrl, user_ctrl);
+ if (ret)
+ goto error_restore_rate;
+
+ /* wait for xfer: 1 period + half-period margin */
+ msleep(period_ms + period_ms / 2);
+
+ /* stop i2c master */
+ user_ctrl = st->chip_config.user_ctrl;
+ ret = regmap_write(st->map, st->reg->user_ctrl, user_ctrl);
+ if (ret)
+ goto error_stop_i2c;
+
+ /* restore sample rate */
+ d = st->chip_config.divider;
+ ret = regmap_write(st->map, st->reg->sample_rate_div, d);
+ if (ret)
+ goto error_restore_rate;
+
+ return 0;
+
+error_stop_i2c:
+ regmap_write(st->map, st->reg->user_ctrl, st->chip_config.user_ctrl);
+error_restore_rate:
+ regmap_write(st->map, st->reg->sample_rate_div, st->chip_config.divider);
+ return ret;
+}
+
+/**
+ * inv_mpu_aux_init() - init i2c auxiliary bus
+ * @st: driver internal state
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
+{
+ unsigned int val;
+ int ret;
+
+ /* configure i2c master */
+ val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
+ INV_MPU6050_BIT_WAIT_FOR_ES;
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_MST_CTRL, val);
+ if (ret)
+ return ret;
+
+ /* configure i2c master delay */
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV4_CTRL, 0);
+ if (ret)
+ return ret;
+
+ val = INV_MPU6050_BIT_I2C_SLV0_DLY_EN |
+ INV_MPU6050_BIT_I2C_SLV1_DLY_EN |
+ INV_MPU6050_BIT_I2C_SLV2_DLY_EN |
+ INV_MPU6050_BIT_I2C_SLV3_DLY_EN |
+ INV_MPU6050_BIT_DELAY_ES_SHADOW;
+ return regmap_write(st->map, INV_MPU6050_REG_I2C_MST_DELAY_CTRL, val);
+}
+
+/**
+ * inv_mpu_aux_read() - read register function for i2c auxiliary bus
+ * @st: driver internal state.
+ * @addr: chip i2c Address
+ * @reg: chip register address
+ * @val: buffer for storing read bytes
+ * @size: number of bytes to read
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+int inv_mpu_aux_read(const struct inv_mpu6050_state *st, uint8_t addr,
+ uint8_t reg, uint8_t *val, size_t size)
+{
+ unsigned int status;
+ int ret;
+
+ if (size > 0x0F)
+ return -EINVAL;
+
+ /* setup i2c SLV0 control: i2c addr, register, enable + size */
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(0),
+ INV_MPU6050_BIT_I2C_SLV_RNW | addr);
+ if (ret)
+ return ret;
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(0), reg);
+ if (ret)
+ return ret;
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0),
+ INV_MPU6050_BIT_SLV_EN | size);
+ if (ret)
+ return ret;
+
+ /* do i2c xfer */
+ ret = inv_mpu_i2c_master_xfer(st);
+ if (ret)
+ goto error_disable_i2c;
+
+ /* disable i2c slave */
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+ if (ret)
+ goto error_disable_i2c;
+
+ /* check i2c status */
+ ret = regmap_read(st->map, INV_MPU6050_REG_I2C_MST_STATUS, &status);
+ if (ret)
+ return ret;
+ if (status & INV_MPU6050_BIT_I2C_SLV0_NACK)
+ return -EIO;
+
+ /* read data in registers */
+ return regmap_bulk_read(st->map, INV_MPU6050_REG_EXT_SENS_DATA,
+ val, size);
+
+error_disable_i2c:
+ regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+ return ret;
+}
+
+/**
+ * inv_mpu_aux_write() - write register function for i2c auxiliary bus
+ * @st: driver internal state.
+ * @addr: chip i2c Address
+ * @reg: chip register address
+ * @val: 1 byte value to write
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+int inv_mpu_aux_write(const struct inv_mpu6050_state *st, uint8_t addr,
+ uint8_t reg, uint8_t val)
+{
+ unsigned int status;
+ int ret;
+
+ /* setup i2c SLV0 control: i2c addr, register, value, enable + size */
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(0), addr);
+ if (ret)
+ return ret;
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(0), reg);
+ if (ret)
+ return ret;
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_DO(0), val);
+ if (ret)
+ return ret;
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0),
+ INV_MPU6050_BIT_SLV_EN | 1);
+ if (ret)
+ return ret;
+
+ /* do i2c xfer */
+ ret = inv_mpu_i2c_master_xfer(st);
+ if (ret)
+ goto error_disable_i2c;
+
+ /* disable i2c slave */
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+ if (ret)
+ goto error_disable_i2c;
+
+ /* check i2c status */
+ ret = regmap_read(st->map, INV_MPU6050_REG_I2C_MST_STATUS, &status);
+ if (ret)
+ return ret;
+ if (status & INV_MPU6050_BIT_I2C_SLV0_NACK)
+ return -EIO;
+
+ return 0;
+
+error_disable_i2c:
+ regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0), 0);
+ return ret;
+}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h
new file mode 100644
index 000000000..b66997545
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#ifndef INV_MPU_AUX_H_
+#define INV_MPU_AUX_H_
+
+#include "inv_mpu_iio.h"
+
+int inv_mpu_aux_init(const struct inv_mpu6050_state *st);
+
+int inv_mpu_aux_read(const struct inv_mpu6050_state *st, uint8_t addr,
+ uint8_t reg, uint8_t *val, size_t size);
+
+int inv_mpu_aux_write(const struct inv_mpu6050_state *st, uint8_t addr,
+ uint8_t reg, uint8_t val);
+
+#endif /* INV_MPU_AUX_H_ */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
new file mode 100644
index 000000000..19a1ef535
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -0,0 +1,1778 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/iio/iio.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include "inv_mpu_iio.h"
+#include "inv_mpu_magn.h"
+
+/*
+ * this is the gyro scale translated from dynamic range plus/minus
+ * {250, 500, 1000, 2000} to rad/s
+ */
+static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724};
+
+/*
+ * this is the accel scale translated from dynamic range plus/minus
+ * {2, 4, 8, 16} to m/s^2
+ */
+static const int accel_scale[] = {598, 1196, 2392, 4785};
+
+static const struct inv_mpu6050_reg_map reg_set_icm20602 = {
+ .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
+ .lpf = INV_MPU6050_REG_CONFIG,
+ .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2,
+ .user_ctrl = INV_MPU6050_REG_USER_CTRL,
+ .fifo_en = INV_MPU6050_REG_FIFO_EN,
+ .gyro_config = INV_MPU6050_REG_GYRO_CONFIG,
+ .accl_config = INV_MPU6050_REG_ACCEL_CONFIG,
+ .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H,
+ .fifo_r_w = INV_MPU6050_REG_FIFO_R_W,
+ .raw_gyro = INV_MPU6050_REG_RAW_GYRO,
+ .raw_accl = INV_MPU6050_REG_RAW_ACCEL,
+ .temperature = INV_MPU6050_REG_TEMPERATURE,
+ .int_enable = INV_MPU6050_REG_INT_ENABLE,
+ .int_status = INV_MPU6050_REG_INT_STATUS,
+ .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1,
+ .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2,
+ .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
+ .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET,
+ .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
+ .i2c_if = INV_ICM20602_REG_I2C_IF,
+};
+
+static const struct inv_mpu6050_reg_map reg_set_6500 = {
+ .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
+ .lpf = INV_MPU6050_REG_CONFIG,
+ .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2,
+ .user_ctrl = INV_MPU6050_REG_USER_CTRL,
+ .fifo_en = INV_MPU6050_REG_FIFO_EN,
+ .gyro_config = INV_MPU6050_REG_GYRO_CONFIG,
+ .accl_config = INV_MPU6050_REG_ACCEL_CONFIG,
+ .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H,
+ .fifo_r_w = INV_MPU6050_REG_FIFO_R_W,
+ .raw_gyro = INV_MPU6050_REG_RAW_GYRO,
+ .raw_accl = INV_MPU6050_REG_RAW_ACCEL,
+ .temperature = INV_MPU6050_REG_TEMPERATURE,
+ .int_enable = INV_MPU6050_REG_INT_ENABLE,
+ .int_status = INV_MPU6050_REG_INT_STATUS,
+ .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1,
+ .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2,
+ .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
+ .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET,
+ .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
+ .i2c_if = 0,
+};
+
+static const struct inv_mpu6050_reg_map reg_set_6050 = {
+ .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
+ .lpf = INV_MPU6050_REG_CONFIG,
+ .user_ctrl = INV_MPU6050_REG_USER_CTRL,
+ .fifo_en = INV_MPU6050_REG_FIFO_EN,
+ .gyro_config = INV_MPU6050_REG_GYRO_CONFIG,
+ .accl_config = INV_MPU6050_REG_ACCEL_CONFIG,
+ .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H,
+ .fifo_r_w = INV_MPU6050_REG_FIFO_R_W,
+ .raw_gyro = INV_MPU6050_REG_RAW_GYRO,
+ .raw_accl = INV_MPU6050_REG_RAW_ACCEL,
+ .temperature = INV_MPU6050_REG_TEMPERATURE,
+ .int_enable = INV_MPU6050_REG_INT_ENABLE,
+ .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1,
+ .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2,
+ .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
+ .accl_offset = INV_MPU6050_REG_ACCEL_OFFSET,
+ .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
+ .i2c_if = 0,
+};
+
+static const struct inv_mpu6050_chip_config chip_config_6050 = {
+ .clk = INV_CLK_INTERNAL,
+ .fsr = INV_MPU6050_FSR_2000DPS,
+ .lpf = INV_MPU6050_FILTER_20HZ,
+ .divider = INV_MPU6050_FIFO_RATE_TO_DIVIDER(50),
+ .gyro_en = true,
+ .accl_en = true,
+ .temp_en = true,
+ .magn_en = false,
+ .gyro_fifo_enable = false,
+ .accl_fifo_enable = false,
+ .temp_fifo_enable = false,
+ .magn_fifo_enable = false,
+ .accl_fs = INV_MPU6050_FS_02G,
+ .user_ctrl = 0,
+};
+
+static const struct inv_mpu6050_chip_config chip_config_6500 = {
+ .clk = INV_CLK_PLL,
+ .fsr = INV_MPU6050_FSR_2000DPS,
+ .lpf = INV_MPU6050_FILTER_20HZ,
+ .divider = INV_MPU6050_FIFO_RATE_TO_DIVIDER(50),
+ .gyro_en = true,
+ .accl_en = true,
+ .temp_en = true,
+ .magn_en = false,
+ .gyro_fifo_enable = false,
+ .accl_fifo_enable = false,
+ .temp_fifo_enable = false,
+ .magn_fifo_enable = false,
+ .accl_fs = INV_MPU6050_FS_02G,
+ .user_ctrl = 0,
+};
+
+/* Indexed by enum inv_devices */
+static const struct inv_mpu6050_hw hw_info[] = {
+ {
+ .whoami = INV_MPU6050_WHOAMI_VALUE,
+ .name = "MPU6050",
+ .reg = &reg_set_6050,
+ .config = &chip_config_6050,
+ .fifo_size = 1024,
+ .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
+ .startup_time = {INV_MPU6050_GYRO_STARTUP_TIME, INV_MPU6050_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_MPU6500_WHOAMI_VALUE,
+ .name = "MPU6500",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_MPU6515_WHOAMI_VALUE,
+ .name = "MPU6515",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_MPU6880_WHOAMI_VALUE,
+ .name = "MPU6880",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 4096,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_MPU6000_WHOAMI_VALUE,
+ .name = "MPU6000",
+ .reg = &reg_set_6050,
+ .config = &chip_config_6050,
+ .fifo_size = 1024,
+ .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
+ .startup_time = {INV_MPU6050_GYRO_STARTUP_TIME, INV_MPU6050_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_MPU9150_WHOAMI_VALUE,
+ .name = "MPU9150",
+ .reg = &reg_set_6050,
+ .config = &chip_config_6050,
+ .fifo_size = 1024,
+ .temp = {INV_MPU6050_TEMP_OFFSET, INV_MPU6050_TEMP_SCALE},
+ .startup_time = {INV_MPU6050_GYRO_STARTUP_TIME, INV_MPU6050_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_MPU9250_WHOAMI_VALUE,
+ .name = "MPU9250",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_MPU9255_WHOAMI_VALUE,
+ .name = "MPU9255",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 512,
+ .temp = {INV_MPU6500_TEMP_OFFSET, INV_MPU6500_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_ICM20608_WHOAMI_VALUE,
+ .name = "ICM20608",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 512,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_ICM20608D_WHOAMI_VALUE,
+ .name = "ICM20608D",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 512,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_ICM20609_WHOAMI_VALUE,
+ .name = "ICM20609",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 4 * 1024,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_ICM20689_WHOAMI_VALUE,
+ .name = "ICM20689",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 4 * 1024,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_ICM20602_WHOAMI_VALUE,
+ .name = "ICM20602",
+ .reg = &reg_set_icm20602,
+ .config = &chip_config_6500,
+ .fifo_size = 1008,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_ICM20602_GYRO_STARTUP_TIME, INV_ICM20602_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_ICM20690_WHOAMI_VALUE,
+ .name = "ICM20690",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 1024,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_ICM20690_GYRO_STARTUP_TIME, INV_ICM20690_ACCEL_STARTUP_TIME},
+ },
+ {
+ .whoami = INV_IAM20680_WHOAMI_VALUE,
+ .name = "IAM20680",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6500,
+ .fifo_size = 512,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
+};
+
+static int inv_mpu6050_pwr_mgmt_1_write(struct inv_mpu6050_state *st, bool sleep,
+ int clock, int temp_dis)
+{
+ u8 val;
+
+ if (clock < 0)
+ clock = st->chip_config.clk;
+ if (temp_dis < 0)
+ temp_dis = !st->chip_config.temp_en;
+
+ val = clock & INV_MPU6050_BIT_CLK_MASK;
+ if (temp_dis)
+ val |= INV_MPU6050_BIT_TEMP_DIS;
+ if (sleep)
+ val |= INV_MPU6050_BIT_SLEEP;
+
+ dev_dbg(regmap_get_device(st->map), "pwr_mgmt_1: 0x%x\n", val);
+ return regmap_write(st->map, st->reg->pwr_mgmt_1, val);
+}
+
+static int inv_mpu6050_clock_switch(struct inv_mpu6050_state *st,
+ unsigned int clock)
+{
+ int ret;
+
+ switch (st->chip_type) {
+ case INV_MPU6050:
+ case INV_MPU6000:
+ case INV_MPU9150:
+ /* old chips: switch clock manually */
+ ret = inv_mpu6050_pwr_mgmt_1_write(st, false, clock, -1);
+ if (ret)
+ return ret;
+ st->chip_config.clk = clock;
+ break;
+ default:
+ /* automatic clock switching, nothing to do */
+ break;
+ }
+
+ return 0;
+}
+
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en,
+ unsigned int mask)
+{
+ unsigned int sleep;
+ u8 pwr_mgmt2, user_ctrl;
+ int ret;
+
+ /* delete useless requests */
+ if (mask & INV_MPU6050_SENSOR_ACCL && en == st->chip_config.accl_en)
+ mask &= ~INV_MPU6050_SENSOR_ACCL;
+ if (mask & INV_MPU6050_SENSOR_GYRO && en == st->chip_config.gyro_en)
+ mask &= ~INV_MPU6050_SENSOR_GYRO;
+ if (mask & INV_MPU6050_SENSOR_TEMP && en == st->chip_config.temp_en)
+ mask &= ~INV_MPU6050_SENSOR_TEMP;
+ if (mask & INV_MPU6050_SENSOR_MAGN && en == st->chip_config.magn_en)
+ mask &= ~INV_MPU6050_SENSOR_MAGN;
+ if (mask == 0)
+ return 0;
+
+ /* turn on/off temperature sensor */
+ if (mask & INV_MPU6050_SENSOR_TEMP) {
+ ret = inv_mpu6050_pwr_mgmt_1_write(st, false, -1, !en);
+ if (ret)
+ return ret;
+ st->chip_config.temp_en = en;
+ }
+
+ /* update user_crtl for driving magnetometer */
+ if (mask & INV_MPU6050_SENSOR_MAGN) {
+ user_ctrl = st->chip_config.user_ctrl;
+ if (en)
+ user_ctrl |= INV_MPU6050_BIT_I2C_MST_EN;
+ else
+ user_ctrl &= ~INV_MPU6050_BIT_I2C_MST_EN;
+ ret = regmap_write(st->map, st->reg->user_ctrl, user_ctrl);
+ if (ret)
+ return ret;
+ st->chip_config.user_ctrl = user_ctrl;
+ st->chip_config.magn_en = en;
+ }
+
+ /* manage accel & gyro engines */
+ if (mask & (INV_MPU6050_SENSOR_ACCL | INV_MPU6050_SENSOR_GYRO)) {
+ /* compute power management 2 current value */
+ pwr_mgmt2 = 0;
+ if (!st->chip_config.accl_en)
+ pwr_mgmt2 |= INV_MPU6050_BIT_PWR_ACCL_STBY;
+ if (!st->chip_config.gyro_en)
+ pwr_mgmt2 |= INV_MPU6050_BIT_PWR_GYRO_STBY;
+
+ /* update to new requested value */
+ if (mask & INV_MPU6050_SENSOR_ACCL) {
+ if (en)
+ pwr_mgmt2 &= ~INV_MPU6050_BIT_PWR_ACCL_STBY;
+ else
+ pwr_mgmt2 |= INV_MPU6050_BIT_PWR_ACCL_STBY;
+ }
+ if (mask & INV_MPU6050_SENSOR_GYRO) {
+ if (en)
+ pwr_mgmt2 &= ~INV_MPU6050_BIT_PWR_GYRO_STBY;
+ else
+ pwr_mgmt2 |= INV_MPU6050_BIT_PWR_GYRO_STBY;
+ }
+
+ /* switch clock to internal when turning gyro off */
+ if (mask & INV_MPU6050_SENSOR_GYRO && !en) {
+ ret = inv_mpu6050_clock_switch(st, INV_CLK_INTERNAL);
+ if (ret)
+ return ret;
+ }
+
+ /* update sensors engine */
+ dev_dbg(regmap_get_device(st->map), "pwr_mgmt_2: 0x%x\n",
+ pwr_mgmt2);
+ ret = regmap_write(st->map, st->reg->pwr_mgmt_2, pwr_mgmt2);
+ if (ret)
+ return ret;
+ if (mask & INV_MPU6050_SENSOR_ACCL)
+ st->chip_config.accl_en = en;
+ if (mask & INV_MPU6050_SENSOR_GYRO)
+ st->chip_config.gyro_en = en;
+
+ /* compute required time to have sensors stabilized */
+ sleep = 0;
+ if (en) {
+ if (mask & INV_MPU6050_SENSOR_ACCL) {
+ if (sleep < st->hw->startup_time.accel)
+ sleep = st->hw->startup_time.accel;
+ }
+ if (mask & INV_MPU6050_SENSOR_GYRO) {
+ if (sleep < st->hw->startup_time.gyro)
+ sleep = st->hw->startup_time.gyro;
+ }
+ } else {
+ if (mask & INV_MPU6050_SENSOR_GYRO) {
+ if (sleep < INV_MPU6050_GYRO_DOWN_TIME)
+ sleep = INV_MPU6050_GYRO_DOWN_TIME;
+ }
+ }
+ if (sleep)
+ msleep(sleep);
+
+ /* switch clock to PLL when turning gyro on */
+ if (mask & INV_MPU6050_SENSOR_GYRO && en) {
+ ret = inv_mpu6050_clock_switch(st, INV_CLK_PLL);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st,
+ bool power_on)
+{
+ int result;
+
+ result = inv_mpu6050_pwr_mgmt_1_write(st, !power_on, -1, -1);
+ if (result)
+ return result;
+
+ if (power_on)
+ usleep_range(INV_MPU6050_REG_UP_TIME_MIN,
+ INV_MPU6050_REG_UP_TIME_MAX);
+
+ return 0;
+}
+
+static int inv_mpu6050_set_gyro_fsr(struct inv_mpu6050_state *st,
+ enum inv_mpu6050_fsr_e val)
+{
+ unsigned int gyro_shift;
+ u8 data;
+
+ switch (st->chip_type) {
+ case INV_ICM20690:
+ gyro_shift = INV_ICM20690_GYRO_CONFIG_FSR_SHIFT;
+ break;
+ default:
+ gyro_shift = INV_MPU6050_GYRO_CONFIG_FSR_SHIFT;
+ break;
+ }
+
+ data = val << gyro_shift;
+ return regmap_write(st->map, st->reg->gyro_config, data);
+}
+
+/*
+ * inv_mpu6050_set_lpf_regs() - set low pass filter registers, chip dependent
+ *
+ * MPU60xx/MPU9150 use only 1 register for accelerometer + gyroscope
+ * MPU6500 and above have a dedicated register for accelerometer
+ */
+static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st,
+ enum inv_mpu6050_filter_e val)
+{
+ int result;
+
+ result = regmap_write(st->map, st->reg->lpf, val);
+ if (result)
+ return result;
+
+ /* set accel lpf */
+ switch (st->chip_type) {
+ case INV_MPU6050:
+ case INV_MPU6000:
+ case INV_MPU9150:
+ /* old chips, nothing to do */
+ return 0;
+ case INV_ICM20689:
+ case INV_ICM20690:
+ /* set FIFO size to maximum value */
+ val |= INV_ICM20689_BITS_FIFO_SIZE_MAX;
+ break;
+ default:
+ break;
+ }
+
+ return regmap_write(st->map, st->reg->accel_lpf, val);
+}
+
+/*
+ * inv_mpu6050_init_config() - Initialize hardware, disable FIFO.
+ *
+ * Initial configuration:
+ * FSR: ± 2000DPS
+ * DLPF: 20Hz
+ * FIFO rate: 50Hz
+ * Clock source: Gyro PLL
+ */
+static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
+{
+ int result;
+ u8 d;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ result = inv_mpu6050_set_gyro_fsr(st, st->chip_config.fsr);
+ if (result)
+ return result;
+
+ result = inv_mpu6050_set_lpf_regs(st, st->chip_config.lpf);
+ if (result)
+ return result;
+
+ d = st->chip_config.divider;
+ result = regmap_write(st->map, st->reg->sample_rate_div, d);
+ if (result)
+ return result;
+
+ d = (st->chip_config.accl_fs << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
+ result = regmap_write(st->map, st->reg->accl_config, d);
+ if (result)
+ return result;
+
+ result = regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask);
+ if (result)
+ return result;
+
+ /*
+ * Internal chip period is 1ms (1kHz).
+ * Let's use at the beginning the theorical value before measuring
+ * with interrupt timestamps.
+ */
+ st->chip_period = NSEC_PER_MSEC;
+
+ /* magn chip init, noop if not present in the chip */
+ result = inv_mpu_magn_probe(st);
+ if (result)
+ return result;
+
+ return 0;
+}
+
+static int inv_mpu6050_sensor_set(struct inv_mpu6050_state *st, int reg,
+ int axis, int val)
+{
+ int ind, result;
+ __be16 d = cpu_to_be16(val);
+
+ ind = (axis - IIO_MOD_X) * 2;
+ result = regmap_bulk_write(st->map, reg + ind, &d, sizeof(d));
+ if (result)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
+ int axis, int *val)
+{
+ int ind, result;
+ __be16 d;
+
+ ind = (axis - IIO_MOD_X) * 2;
+ result = regmap_bulk_read(st->map, reg + ind, &d, sizeof(d));
+ if (result)
+ return -EINVAL;
+ *val = (short)be16_to_cpup(&d);
+
+ return IIO_VAL_INT;
+}
+
+static int inv_mpu6050_read_channel_data(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct device *pdev = regmap_get_device(st->map);
+ unsigned int freq_hz, period_us, min_sleep_us, max_sleep_us;
+ int result;
+ int ret;
+
+ /* compute sample period */
+ freq_hz = INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+ period_us = 1000000 / freq_hz;
+
+ result = pm_runtime_resume_and_get(pdev);
+ if (result)
+ return result;
+
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ if (!st->chip_config.gyro_en) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_SENSOR_GYRO);
+ if (result)
+ goto error_power_off;
+ /* need to wait 2 periods to have first valid sample */
+ min_sleep_us = 2 * period_us;
+ max_sleep_us = 2 * (period_us + period_us / 2);
+ usleep_range(min_sleep_us, max_sleep_us);
+ }
+ ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
+ chan->channel2, val);
+ break;
+ case IIO_ACCEL:
+ if (!st->chip_config.accl_en) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_SENSOR_ACCL);
+ if (result)
+ goto error_power_off;
+ /* wait 1 period for first sample availability */
+ min_sleep_us = period_us;
+ max_sleep_us = period_us + period_us / 2;
+ usleep_range(min_sleep_us, max_sleep_us);
+ }
+ ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
+ chan->channel2, val);
+ break;
+ case IIO_TEMP:
+ /* temperature sensor work only with accel and/or gyro */
+ if (!st->chip_config.accl_en && !st->chip_config.gyro_en) {
+ result = -EBUSY;
+ goto error_power_off;
+ }
+ if (!st->chip_config.temp_en) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_SENSOR_TEMP);
+ if (result)
+ goto error_power_off;
+ /* wait 1 period for first sample availability */
+ min_sleep_us = period_us;
+ max_sleep_us = period_us + period_us / 2;
+ usleep_range(min_sleep_us, max_sleep_us);
+ }
+ ret = inv_mpu6050_sensor_show(st, st->reg->temperature,
+ IIO_MOD_X, val);
+ break;
+ case IIO_MAGN:
+ if (!st->chip_config.magn_en) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_SENSOR_MAGN);
+ if (result)
+ goto error_power_off;
+ /* frequency is limited for magnetometer */
+ if (freq_hz > INV_MPU_MAGN_FREQ_HZ_MAX) {
+ freq_hz = INV_MPU_MAGN_FREQ_HZ_MAX;
+ period_us = 1000000 / freq_hz;
+ }
+ /* need to wait 2 periods to have first valid sample */
+ min_sleep_us = 2 * period_us;
+ max_sleep_us = 2 * (period_us + period_us / 2);
+ usleep_range(min_sleep_us, max_sleep_us);
+ }
+ ret = inv_mpu_magn_read(st, chan->channel2, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ pm_runtime_mark_last_busy(pdev);
+ pm_runtime_put_autosuspend(pdev);
+
+ return ret;
+
+error_power_off:
+ pm_runtime_put_autosuspend(pdev);
+ return result;
+}
+
+static int
+inv_mpu6050_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret = 0;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
+ ret = inv_mpu6050_read_channel_data(indio_dev, chan, val);
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ mutex_lock(&st->lock);
+ *val = 0;
+ *val2 = gyro_scale_6050[st->chip_config.fsr];
+ mutex_unlock(&st->lock);
+
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_ACCEL:
+ mutex_lock(&st->lock);
+ *val = 0;
+ *val2 = accel_scale[st->chip_config.accl_fs];
+ mutex_unlock(&st->lock);
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_TEMP:
+ *val = st->hw->temp.scale / 1000000;
+ *val2 = st->hw->temp.scale % 1000000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_MAGN:
+ return inv_mpu_magn_get_scale(st, chan, val, val2);
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = st->hw->temp.offset;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ mutex_lock(&st->lock);
+ ret = inv_mpu6050_sensor_show(st, st->reg->gyro_offset,
+ chan->channel2, val);
+ mutex_unlock(&st->lock);
+ return ret;
+ case IIO_ACCEL:
+ mutex_lock(&st->lock);
+ ret = inv_mpu6050_sensor_show(st, st->reg->accl_offset,
+ chan->channel2, val);
+ mutex_unlock(&st->lock);
+ return ret;
+
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val,
+ int val2)
+{
+ int result, i;
+
+ if (val != 0)
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) {
+ if (gyro_scale_6050[i] == val2) {
+ result = inv_mpu6050_set_gyro_fsr(st, i);
+ if (result)
+ return result;
+
+ st->chip_config.fsr = i;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int inv_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+ default:
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+}
+
+static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val,
+ int val2)
+{
+ int result, i;
+ u8 d;
+
+ if (val != 0)
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) {
+ if (accel_scale[i] == val2) {
+ d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
+ result = regmap_write(st->map, st->reg->accl_config, d);
+ if (result)
+ return result;
+
+ st->chip_config.accl_fs = i;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct device *pdev = regmap_get_device(st->map);
+ int result;
+
+ /*
+ * we should only update scale when the chip is disabled, i.e.
+ * not running
+ */
+ result = iio_device_claim_direct_mode(indio_dev);
+ if (result)
+ return result;
+
+ mutex_lock(&st->lock);
+ result = pm_runtime_resume_and_get(pdev);
+ if (result)
+ goto error_write_raw_unlock;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ result = inv_mpu6050_write_gyro_scale(st, val, val2);
+ break;
+ case IIO_ACCEL:
+ result = inv_mpu6050_write_accel_scale(st, val, val2);
+ break;
+ default:
+ result = -EINVAL;
+ break;
+ }
+ break;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ result = inv_mpu6050_sensor_set(st,
+ st->reg->gyro_offset,
+ chan->channel2, val);
+ break;
+ case IIO_ACCEL:
+ result = inv_mpu6050_sensor_set(st,
+ st->reg->accl_offset,
+ chan->channel2, val);
+ break;
+ default:
+ result = -EINVAL;
+ break;
+ }
+ break;
+ default:
+ result = -EINVAL;
+ break;
+ }
+
+ pm_runtime_mark_last_busy(pdev);
+ pm_runtime_put_autosuspend(pdev);
+error_write_raw_unlock:
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
+
+ return result;
+}
+
+/*
+ * inv_mpu6050_set_lpf() - set low pass filer based on fifo rate.
+ *
+ * Based on the Nyquist principle, the bandwidth of the low
+ * pass filter must not exceed the signal sampling rate divided
+ * by 2, or there would be aliasing.
+ * This function basically search for the correct low pass
+ * parameters based on the fifo rate, e.g, sampling frequency.
+ *
+ * lpf is set automatically when setting sampling rate to avoid any aliases.
+ */
+static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
+{
+ static const int hz[] = {400, 200, 90, 40, 20, 10};
+ static const int d[] = {
+ INV_MPU6050_FILTER_200HZ, INV_MPU6050_FILTER_100HZ,
+ INV_MPU6050_FILTER_45HZ, INV_MPU6050_FILTER_20HZ,
+ INV_MPU6050_FILTER_10HZ, INV_MPU6050_FILTER_5HZ
+ };
+ int i, result;
+ u8 data;
+
+ data = INV_MPU6050_FILTER_5HZ;
+ for (i = 0; i < ARRAY_SIZE(hz); ++i) {
+ if (rate >= hz[i]) {
+ data = d[i];
+ break;
+ }
+ }
+ result = inv_mpu6050_set_lpf_regs(st, data);
+ if (result)
+ return result;
+ st->chip_config.lpf = data;
+
+ return 0;
+}
+
+/*
+ * inv_mpu6050_fifo_rate_store() - Set fifo rate.
+ */
+static ssize_t
+inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int fifo_rate;
+ u8 d;
+ int result;
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct device *pdev = regmap_get_device(st->map);
+
+ if (kstrtoint(buf, 10, &fifo_rate))
+ return -EINVAL;
+ if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE ||
+ fifo_rate > INV_MPU6050_MAX_FIFO_RATE)
+ return -EINVAL;
+
+ /* compute the chip sample rate divider */
+ d = INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate);
+ /* compute back the fifo rate to handle truncation cases */
+ fifo_rate = INV_MPU6050_DIVIDER_TO_FIFO_RATE(d);
+
+ mutex_lock(&st->lock);
+ if (d == st->chip_config.divider) {
+ result = 0;
+ goto fifo_rate_fail_unlock;
+ }
+ result = pm_runtime_resume_and_get(pdev);
+ if (result)
+ goto fifo_rate_fail_unlock;
+
+ result = regmap_write(st->map, st->reg->sample_rate_div, d);
+ if (result)
+ goto fifo_rate_fail_power_off;
+ st->chip_config.divider = d;
+
+ result = inv_mpu6050_set_lpf(st, fifo_rate);
+ if (result)
+ goto fifo_rate_fail_power_off;
+
+ /* update rate for magn, noop if not present in chip */
+ result = inv_mpu_magn_set_rate(st, fifo_rate);
+ if (result)
+ goto fifo_rate_fail_power_off;
+
+ pm_runtime_mark_last_busy(pdev);
+fifo_rate_fail_power_off:
+ pm_runtime_put_autosuspend(pdev);
+fifo_rate_fail_unlock:
+ mutex_unlock(&st->lock);
+ if (result)
+ return result;
+
+ return count;
+}
+
+/*
+ * inv_fifo_rate_show() - Get the current sampling rate.
+ */
+static ssize_t
+inv_fifo_rate_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
+ unsigned fifo_rate;
+
+ mutex_lock(&st->lock);
+ fifo_rate = INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+ mutex_unlock(&st->lock);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", fifo_rate);
+}
+
+/*
+ * inv_attr_show() - calling this function will show current
+ * parameters.
+ *
+ * Deprecated in favor of IIO mounting matrix API.
+ *
+ * See inv_get_mount_matrix()
+ */
+static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ s8 *m;
+
+ switch (this_attr->address) {
+ /*
+ * In MPU6050, the two matrix are the same because gyro and accel
+ * are integrated in one chip
+ */
+ case ATTR_GYRO_MATRIX:
+ case ATTR_ACCL_MATRIX:
+ m = st->plat_data.orientation;
+
+ return scnprintf(buf, PAGE_SIZE,
+ "%d, %d, %d; %d, %d, %d; %d, %d, %d\n",
+ m[0], m[1], m[2], m[3], m[4], m[5], m[6], m[7], m[8]);
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * inv_mpu6050_validate_trigger() - validate_trigger callback for invensense
+ * MPU6050 device.
+ * @indio_dev: The IIO device
+ * @trig: The new trigger
+ *
+ * Returns: 0 if the 'trig' matches the trigger registered by the MPU6050
+ * device, -EINVAL otherwise.
+ */
+static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev,
+ struct iio_trigger *trig)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ if (st->trig != trig)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct iio_mount_matrix *
+inv_get_mount_matrix(const struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct inv_mpu6050_state *data = iio_priv(indio_dev);
+ const struct iio_mount_matrix *matrix;
+
+ if (chan->type == IIO_MAGN)
+ matrix = &data->magn_orient;
+ else
+ matrix = &data->orientation;
+
+ return matrix;
+}
+
+static const struct iio_chan_spec_ext_info inv_ext_info[] = {
+ IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, inv_get_mount_matrix),
+ { }
+};
+
+#define INV_MPU6050_CHAN(_type, _channel2, _index) \
+ { \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = _channel2, \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_CALIBBIAS), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .shift = 0, \
+ .endianness = IIO_BE, \
+ }, \
+ .ext_info = inv_ext_info, \
+ }
+
+#define INV_MPU6050_TEMP_CHAN(_index) \
+ { \
+ .type = IIO_TEMP, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \
+ | BIT(IIO_CHAN_INFO_OFFSET) \
+ | BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .shift = 0, \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+static const struct iio_chan_spec inv_mpu_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(INV_MPU6050_SCAN_TIMESTAMP),
+
+ INV_MPU6050_TEMP_CHAN(INV_MPU6050_SCAN_TEMP),
+
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+};
+
+#define INV_MPU6050_SCAN_MASK_3AXIS_ACCEL \
+ (BIT(INV_MPU6050_SCAN_ACCL_X) \
+ | BIT(INV_MPU6050_SCAN_ACCL_Y) \
+ | BIT(INV_MPU6050_SCAN_ACCL_Z))
+
+#define INV_MPU6050_SCAN_MASK_3AXIS_GYRO \
+ (BIT(INV_MPU6050_SCAN_GYRO_X) \
+ | BIT(INV_MPU6050_SCAN_GYRO_Y) \
+ | BIT(INV_MPU6050_SCAN_GYRO_Z))
+
+#define INV_MPU6050_SCAN_MASK_TEMP (BIT(INV_MPU6050_SCAN_TEMP))
+
+static const unsigned long inv_mpu_scan_masks[] = {
+ /* 3-axis accel */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL,
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 3-axis gyro */
+ INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+ INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 6-axis accel + gyro */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+ | INV_MPU6050_SCAN_MASK_TEMP,
+ 0,
+};
+
+#define INV_MPU9X50_MAGN_CHAN(_chan2, _bits, _index) \
+ { \
+ .type = IIO_MAGN, \
+ .modified = 1, \
+ .channel2 = _chan2, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_RAW), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = _bits, \
+ .storagebits = 16, \
+ .shift = 0, \
+ .endianness = IIO_BE, \
+ }, \
+ .ext_info = inv_ext_info, \
+ }
+
+static const struct iio_chan_spec inv_mpu9150_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(INV_MPU9X50_SCAN_TIMESTAMP),
+
+ INV_MPU6050_TEMP_CHAN(INV_MPU6050_SCAN_TEMP),
+
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+
+ /* Magnetometer resolution is 13 bits */
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_X, 13, INV_MPU9X50_SCAN_MAGN_X),
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_Y, 13, INV_MPU9X50_SCAN_MAGN_Y),
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_Z, 13, INV_MPU9X50_SCAN_MAGN_Z),
+};
+
+static const struct iio_chan_spec inv_mpu9250_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(INV_MPU9X50_SCAN_TIMESTAMP),
+
+ INV_MPU6050_TEMP_CHAN(INV_MPU6050_SCAN_TEMP),
+
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+
+ /* Magnetometer resolution is 16 bits */
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_X, 16, INV_MPU9X50_SCAN_MAGN_X),
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_Y, 16, INV_MPU9X50_SCAN_MAGN_Y),
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_Z, 16, INV_MPU9X50_SCAN_MAGN_Z),
+};
+
+#define INV_MPU9X50_SCAN_MASK_3AXIS_MAGN \
+ (BIT(INV_MPU9X50_SCAN_MAGN_X) \
+ | BIT(INV_MPU9X50_SCAN_MAGN_Y) \
+ | BIT(INV_MPU9X50_SCAN_MAGN_Z))
+
+static const unsigned long inv_mpu9x50_scan_masks[] = {
+ /* 3-axis accel */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL,
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 3-axis gyro */
+ INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+ INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 3-axis magn */
+ INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+ INV_MPU9X50_SCAN_MASK_3AXIS_MAGN | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 6-axis accel + gyro */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO,
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+ | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 6-axis accel + magn */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN
+ | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 6-axis gyro + magn */
+ INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+ INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN
+ | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 9-axis accel + gyro + magn */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+ | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN,
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+ | INV_MPU9X50_SCAN_MASK_3AXIS_MAGN
+ | INV_MPU6050_SCAN_MASK_TEMP,
+ 0,
+};
+
+static const unsigned long inv_icm20602_scan_masks[] = {
+ /* 3-axis accel + temp (mandatory) */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 3-axis gyro + temp (mandatory) */
+ INV_MPU6050_SCAN_MASK_3AXIS_GYRO | INV_MPU6050_SCAN_MASK_TEMP,
+ /* 6-axis accel + gyro + temp (mandatory) */
+ INV_MPU6050_SCAN_MASK_3AXIS_ACCEL | INV_MPU6050_SCAN_MASK_3AXIS_GYRO
+ | INV_MPU6050_SCAN_MASK_TEMP,
+ 0,
+};
+
+/*
+ * The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
+ * INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
+ * low-pass filter. Specifically, each of these sampling rates are about twice
+ * the bandwidth of a corresponding low-pass filter, which should eliminate
+ * aliasing following the Nyquist principle. By picking a frequency different
+ * from these, the user risks aliasing effects.
+ */
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 20 50 100 200 500");
+static IIO_CONST_ATTR(in_anglvel_scale_available,
+ "0.000133090 0.000266181 0.000532362 0.001064724");
+static IIO_CONST_ATTR(in_accel_scale_available,
+ "0.000598 0.001196 0.002392 0.004785");
+static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show,
+ inv_mpu6050_fifo_rate_store);
+
+/* Deprecated: kept for userspace backward compatibility. */
+static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL,
+ ATTR_GYRO_MATRIX);
+static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL,
+ ATTR_ACCL_MATRIX);
+
+static struct attribute *inv_attributes[] = {
+ &iio_dev_attr_in_gyro_matrix.dev_attr.attr, /* deprecated */
+ &iio_dev_attr_in_accel_matrix.dev_attr.attr, /* deprecated */
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_const_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group inv_attribute_group = {
+ .attrs = inv_attributes
+};
+
+static int inv_mpu6050_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg,
+ unsigned int writeval,
+ unsigned int *readval)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+ if (readval)
+ ret = regmap_read(st->map, reg, readval);
+ else
+ ret = regmap_write(st->map, reg, writeval);
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static const struct iio_info mpu_info = {
+ .read_raw = &inv_mpu6050_read_raw,
+ .write_raw = &inv_mpu6050_write_raw,
+ .write_raw_get_fmt = &inv_write_raw_get_fmt,
+ .attrs = &inv_attribute_group,
+ .validate_trigger = inv_mpu6050_validate_trigger,
+ .debugfs_reg_access = &inv_mpu6050_reg_access,
+};
+
+/*
+ * inv_check_and_setup_chip() - check and setup chip.
+ */
+static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
+{
+ int result;
+ unsigned int regval, mask;
+ int i;
+
+ st->hw = &hw_info[st->chip_type];
+ st->reg = hw_info[st->chip_type].reg;
+ memcpy(&st->chip_config, hw_info[st->chip_type].config,
+ sizeof(st->chip_config));
+
+ /* check chip self-identification */
+ result = regmap_read(st->map, INV_MPU6050_REG_WHOAMI, &regval);
+ if (result)
+ return result;
+ if (regval != st->hw->whoami) {
+ /* check whoami against all possible values */
+ for (i = 0; i < INV_NUM_PARTS; ++i) {
+ if (regval == hw_info[i].whoami) {
+ dev_warn(regmap_get_device(st->map),
+ "whoami mismatch got 0x%02x (%s) expected 0x%02x (%s)\n",
+ regval, hw_info[i].name,
+ st->hw->whoami, st->hw->name);
+ break;
+ }
+ }
+ if (i >= INV_NUM_PARTS) {
+ dev_err(regmap_get_device(st->map),
+ "invalid whoami 0x%02x expected 0x%02x (%s)\n",
+ regval, st->hw->whoami, st->hw->name);
+ return -ENODEV;
+ }
+ }
+
+ /* reset to make sure previous state are not there */
+ result = regmap_write(st->map, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_H_RESET);
+ if (result)
+ return result;
+ msleep(INV_MPU6050_POWER_UP_TIME);
+ switch (st->chip_type) {
+ case INV_MPU6000:
+ case INV_MPU6500:
+ case INV_MPU6515:
+ case INV_MPU6880:
+ case INV_MPU9250:
+ case INV_MPU9255:
+ /* reset signal path (required for spi connection) */
+ regval = INV_MPU6050_BIT_TEMP_RST | INV_MPU6050_BIT_ACCEL_RST |
+ INV_MPU6050_BIT_GYRO_RST;
+ result = regmap_write(st->map, INV_MPU6050_REG_SIGNAL_PATH_RESET,
+ regval);
+ if (result)
+ return result;
+ msleep(INV_MPU6050_POWER_UP_TIME);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Turn power on. After reset, the sleep bit could be on
+ * or off depending on the OTP settings. Turning power on
+ * make it in a definite state as well as making the hardware
+ * state align with the software state
+ */
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ return result;
+ mask = INV_MPU6050_SENSOR_ACCL | INV_MPU6050_SENSOR_GYRO |
+ INV_MPU6050_SENSOR_TEMP | INV_MPU6050_SENSOR_MAGN;
+ result = inv_mpu6050_switch_engine(st, false, mask);
+ if (result)
+ goto error_power_off;
+
+ return 0;
+
+error_power_off:
+ inv_mpu6050_set_power_itg(st, false);
+ return result;
+}
+
+static int inv_mpu_core_enable_regulator_vddio(struct inv_mpu6050_state *st)
+{
+ int result;
+
+ result = regulator_enable(st->vddio_supply);
+ if (result) {
+ dev_err(regmap_get_device(st->map),
+ "Failed to enable vddio regulator: %d\n", result);
+ } else {
+ /* Give the device a little bit of time to start up. */
+ usleep_range(3000, 5000);
+ }
+
+ return result;
+}
+
+static int inv_mpu_core_disable_regulator_vddio(struct inv_mpu6050_state *st)
+{
+ int result;
+
+ result = regulator_disable(st->vddio_supply);
+ if (result)
+ dev_err(regmap_get_device(st->map),
+ "Failed to disable vddio regulator: %d\n", result);
+
+ return result;
+}
+
+static void inv_mpu_core_disable_regulator_action(void *_data)
+{
+ struct inv_mpu6050_state *st = _data;
+ int result;
+
+ result = regulator_disable(st->vdd_supply);
+ if (result)
+ dev_err(regmap_get_device(st->map),
+ "Failed to disable vdd regulator: %d\n", result);
+
+ inv_mpu_core_disable_regulator_vddio(st);
+}
+
+static void inv_mpu_pm_disable(void *data)
+{
+ struct device *dev = data;
+
+ pm_runtime_disable(dev);
+}
+
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+ int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type)
+{
+ struct inv_mpu6050_state *st;
+ struct iio_dev *indio_dev;
+ struct inv_mpu6050_platform_data *pdata;
+ struct device *dev = regmap_get_device(regmap);
+ int result;
+ struct irq_data *desc;
+ int irq_type;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ BUILD_BUG_ON(ARRAY_SIZE(hw_info) != INV_NUM_PARTS);
+ if (chip_type < 0 || chip_type >= INV_NUM_PARTS) {
+ dev_err(dev, "Bad invensense chip_type=%d name=%s\n",
+ chip_type, name);
+ return -ENODEV;
+ }
+ st = iio_priv(indio_dev);
+ mutex_init(&st->lock);
+ st->chip_type = chip_type;
+ st->irq = irq;
+ st->map = regmap;
+
+ pdata = dev_get_platdata(dev);
+ if (!pdata) {
+ result = iio_read_mount_matrix(dev, &st->orientation);
+ if (result) {
+ dev_err(dev, "Failed to retrieve mounting matrix %d\n",
+ result);
+ return result;
+ }
+ } else {
+ st->plat_data = *pdata;
+ }
+
+ if (irq > 0) {
+ desc = irq_get_irq_data(irq);
+ if (!desc) {
+ dev_err(dev, "Could not find IRQ %d\n", irq);
+ return -EINVAL;
+ }
+
+ irq_type = irqd_get_trigger_type(desc);
+ if (!irq_type)
+ irq_type = IRQF_TRIGGER_RISING;
+ } else {
+ /* Doesn't really matter, use the default */
+ irq_type = IRQF_TRIGGER_RISING;
+ }
+
+ if (irq_type & IRQF_TRIGGER_RISING) // rising or both-edge
+ st->irq_mask = INV_MPU6050_ACTIVE_HIGH;
+ else if (irq_type == IRQF_TRIGGER_FALLING)
+ st->irq_mask = INV_MPU6050_ACTIVE_LOW;
+ else if (irq_type == IRQF_TRIGGER_HIGH)
+ st->irq_mask = INV_MPU6050_ACTIVE_HIGH |
+ INV_MPU6050_LATCH_INT_EN;
+ else if (irq_type == IRQF_TRIGGER_LOW)
+ st->irq_mask = INV_MPU6050_ACTIVE_LOW |
+ INV_MPU6050_LATCH_INT_EN;
+ else {
+ dev_err(dev, "Invalid interrupt type 0x%x specified\n",
+ irq_type);
+ return -EINVAL;
+ }
+
+ st->vdd_supply = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(st->vdd_supply))
+ return dev_err_probe(dev, PTR_ERR(st->vdd_supply),
+ "Failed to get vdd regulator\n");
+
+ st->vddio_supply = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(st->vddio_supply))
+ return dev_err_probe(dev, PTR_ERR(st->vddio_supply),
+ "Failed to get vddio regulator\n");
+
+ result = regulator_enable(st->vdd_supply);
+ if (result) {
+ dev_err(dev, "Failed to enable vdd regulator: %d\n", result);
+ return result;
+ }
+ msleep(INV_MPU6050_POWER_UP_TIME);
+
+ result = inv_mpu_core_enable_regulator_vddio(st);
+ if (result) {
+ regulator_disable(st->vdd_supply);
+ return result;
+ }
+
+ result = devm_add_action_or_reset(dev, inv_mpu_core_disable_regulator_action,
+ st);
+ if (result) {
+ dev_err(dev, "Failed to setup regulator cleanup action %d\n",
+ result);
+ return result;
+ }
+
+ /* fill magnetometer orientation */
+ result = inv_mpu_magn_set_orient(st);
+ if (result)
+ return result;
+
+ /* power is turned on inside check chip type*/
+ result = inv_check_and_setup_chip(st);
+ if (result)
+ return result;
+
+ result = inv_mpu6050_init_config(indio_dev);
+ if (result) {
+ dev_err(dev, "Could not initialize device.\n");
+ goto error_power_off;
+ }
+
+ dev_set_drvdata(dev, indio_dev);
+ /* name will be NULL when enumerated via ACPI */
+ if (name)
+ indio_dev->name = name;
+ else
+ indio_dev->name = dev_name(dev);
+
+ /* requires parent device set in indio_dev */
+ if (inv_mpu_bus_setup) {
+ result = inv_mpu_bus_setup(indio_dev);
+ if (result)
+ goto error_power_off;
+ }
+
+ /* chip init is done, turning on runtime power management */
+ result = pm_runtime_set_active(dev);
+ if (result)
+ goto error_power_off;
+ pm_runtime_get_noresume(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, INV_MPU6050_SUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_put(dev);
+ result = devm_add_action_or_reset(dev, inv_mpu_pm_disable, dev);
+ if (result)
+ return result;
+
+ switch (chip_type) {
+ case INV_MPU9150:
+ indio_dev->channels = inv_mpu9150_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu9150_channels);
+ indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
+ break;
+ case INV_MPU9250:
+ case INV_MPU9255:
+ indio_dev->channels = inv_mpu9250_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu9250_channels);
+ indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
+ break;
+ case INV_ICM20602:
+ indio_dev->channels = inv_mpu_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+ indio_dev->available_scan_masks = inv_icm20602_scan_masks;
+ break;
+ default:
+ indio_dev->channels = inv_mpu_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+ indio_dev->available_scan_masks = inv_mpu_scan_masks;
+ break;
+ }
+ /*
+ * Use magnetometer inside the chip only if there is no i2c
+ * auxiliary device in use. Otherwise Going back to 6-axis only.
+ */
+ if (st->magn_disabled) {
+ indio_dev->channels = inv_mpu_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+ indio_dev->available_scan_masks = inv_mpu_scan_masks;
+ }
+
+ indio_dev->info = &mpu_info;
+
+ if (irq > 0) {
+ /*
+ * The driver currently only supports buffered capture with its
+ * own trigger. So no IRQ, no trigger, no buffer
+ */
+ result = devm_iio_triggered_buffer_setup(dev, indio_dev,
+ iio_pollfunc_store_time,
+ inv_mpu6050_read_fifo,
+ NULL);
+ if (result) {
+ dev_err(dev, "configure buffer fail %d\n", result);
+ return result;
+ }
+
+ result = inv_mpu6050_probe_trigger(indio_dev, irq_type);
+ if (result) {
+ dev_err(dev, "trigger probe fail %d\n", result);
+ return result;
+ }
+ }
+
+ result = devm_iio_device_register(dev, indio_dev);
+ if (result) {
+ dev_err(dev, "IIO register fail %d\n", result);
+ return result;
+ }
+
+ return 0;
+
+error_power_off:
+ inv_mpu6050_set_power_itg(st, false);
+ return result;
+}
+EXPORT_SYMBOL_GPL(inv_mpu_core_probe);
+
+static int __maybe_unused inv_mpu_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int result;
+
+ mutex_lock(&st->lock);
+ result = inv_mpu_core_enable_regulator_vddio(st);
+ if (result)
+ goto out_unlock;
+
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ goto out_unlock;
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ result = inv_mpu6050_switch_engine(st, true, st->suspended_sensors);
+ if (result)
+ goto out_unlock;
+
+ if (iio_buffer_enabled(indio_dev))
+ result = inv_mpu6050_prepare_fifo(st, true);
+
+out_unlock:
+ mutex_unlock(&st->lock);
+
+ return result;
+}
+
+static int __maybe_unused inv_mpu_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int result;
+
+ mutex_lock(&st->lock);
+
+ st->suspended_sensors = 0;
+ if (pm_runtime_suspended(dev)) {
+ result = 0;
+ goto out_unlock;
+ }
+
+ if (iio_buffer_enabled(indio_dev)) {
+ result = inv_mpu6050_prepare_fifo(st, false);
+ if (result)
+ goto out_unlock;
+ }
+
+ if (st->chip_config.accl_en)
+ st->suspended_sensors |= INV_MPU6050_SENSOR_ACCL;
+ if (st->chip_config.gyro_en)
+ st->suspended_sensors |= INV_MPU6050_SENSOR_GYRO;
+ if (st->chip_config.temp_en)
+ st->suspended_sensors |= INV_MPU6050_SENSOR_TEMP;
+ if (st->chip_config.magn_en)
+ st->suspended_sensors |= INV_MPU6050_SENSOR_MAGN;
+ result = inv_mpu6050_switch_engine(st, false, st->suspended_sensors);
+ if (result)
+ goto out_unlock;
+
+ result = inv_mpu6050_set_power_itg(st, false);
+ if (result)
+ goto out_unlock;
+
+ inv_mpu_core_disable_regulator_vddio(st);
+out_unlock:
+ mutex_unlock(&st->lock);
+
+ return result;
+}
+
+static int __maybe_unused inv_mpu_runtime_suspend(struct device *dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
+ unsigned int sensors;
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ sensors = INV_MPU6050_SENSOR_ACCL | INV_MPU6050_SENSOR_GYRO |
+ INV_MPU6050_SENSOR_TEMP | INV_MPU6050_SENSOR_MAGN;
+ ret = inv_mpu6050_switch_engine(st, false, sensors);
+ if (ret)
+ goto out_unlock;
+
+ ret = inv_mpu6050_set_power_itg(st, false);
+ if (ret)
+ goto out_unlock;
+
+ inv_mpu_core_disable_regulator_vddio(st);
+
+out_unlock:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static int __maybe_unused inv_mpu_runtime_resume(struct device *dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
+ int ret;
+
+ ret = inv_mpu_core_enable_regulator_vddio(st);
+ if (ret)
+ return ret;
+
+ return inv_mpu6050_set_power_itg(st, true);
+}
+
+const struct dev_pm_ops inv_mpu_pmops = {
+ SET_SYSTEM_SLEEP_PM_OPS(inv_mpu_suspend, inv_mpu_resume)
+ SET_RUNTIME_PM_OPS(inv_mpu_runtime_suspend, inv_mpu_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(inv_mpu_pmops);
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Invensense device MPU6050 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
new file mode 100644
index 000000000..14255a918
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int inv_mpu6050_select_bypass(struct i2c_mux_core *muxc, u32 chan_id)
+{
+ return 0;
+}
+
+static bool inv_mpu_i2c_aux_bus(struct device *dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(dev));
+
+ switch (st->chip_type) {
+ case INV_ICM20608:
+ case INV_ICM20608D:
+ case INV_ICM20609:
+ case INV_ICM20689:
+ case INV_ICM20602:
+ case INV_IAM20680:
+ /* no i2c auxiliary bus on the chip */
+ return false;
+ case INV_MPU9150:
+ case INV_MPU9250:
+ case INV_MPU9255:
+ if (st->magn_disabled)
+ return true;
+ else
+ return false;
+ default:
+ return true;
+ }
+}
+
+static int inv_mpu_i2c_aux_setup(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct device *dev = indio_dev->dev.parent;
+ struct fwnode_handle *mux_node;
+ int ret;
+
+ /*
+ * MPU9xxx magnetometer support requires to disable i2c auxiliary bus.
+ * To ensure backward compatibility with existing setups, do not disable
+ * i2c auxiliary bus if it used.
+ * Check for i2c-gate node in devicetree and set magnetometer disabled.
+ * Only MPU6500 is supported by ACPI, no need to check.
+ */
+ switch (st->chip_type) {
+ case INV_MPU9150:
+ case INV_MPU9250:
+ case INV_MPU9255:
+ mux_node = device_get_named_child_node(dev, "i2c-gate");
+ if (mux_node != NULL) {
+ st->magn_disabled = true;
+ dev_warn(dev, "disable internal use of magnetometer\n");
+ }
+ fwnode_handle_put(mux_node);
+ break;
+ default:
+ break;
+ }
+
+ /* enable i2c bypass when using i2c auxiliary bus */
+ if (inv_mpu_i2c_aux_bus(dev)) {
+ ret = regmap_write(st->map, st->reg->int_pin_cfg,
+ st->irq_mask | INV_MPU6050_BIT_BYPASS_EN);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * inv_mpu_probe() - probe function.
+ * @client: i2c client.
+ * @id: i2c device id.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_mpu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const void *match;
+ struct inv_mpu6050_state *st;
+ int result;
+ enum inv_devices chip_type;
+ struct regmap *regmap;
+ const char *name;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -EOPNOTSUPP;
+
+ match = device_get_match_data(&client->dev);
+ if (match) {
+ chip_type = (uintptr_t)match;
+ name = client->name;
+ } else if (id) {
+ chip_type = (enum inv_devices)
+ id->driver_data;
+ name = id->name;
+ } else {
+ return -ENOSYS;
+ }
+
+ regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+ regmap);
+ return PTR_ERR(regmap);
+ }
+
+ result = inv_mpu_core_probe(regmap, client->irq, name,
+ inv_mpu_i2c_aux_setup, chip_type);
+ if (result < 0)
+ return result;
+
+ st = iio_priv(dev_get_drvdata(&client->dev));
+ if (inv_mpu_i2c_aux_bus(&client->dev)) {
+ /* declare i2c auxiliary bus */
+ st->muxc = i2c_mux_alloc(client->adapter, &client->dev,
+ 1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
+ inv_mpu6050_select_bypass, NULL);
+ if (!st->muxc)
+ return -ENOMEM;
+ st->muxc->priv = dev_get_drvdata(&client->dev);
+ result = i2c_mux_add_adapter(st->muxc, 0, 0, 0);
+ if (result)
+ return result;
+ result = inv_mpu_acpi_create_mux_client(client);
+ if (result)
+ goto out_del_mux;
+ }
+
+ return 0;
+
+out_del_mux:
+ i2c_mux_del_adapters(st->muxc);
+ return result;
+}
+
+static void inv_mpu_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ if (st->muxc) {
+ inv_mpu_acpi_delete_mux_client(client);
+ i2c_mux_del_adapters(st->muxc);
+ }
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id inv_mpu_id[] = {
+ {"mpu6050", INV_MPU6050},
+ {"mpu6500", INV_MPU6500},
+ {"mpu6515", INV_MPU6515},
+ {"mpu6880", INV_MPU6880},
+ {"mpu9150", INV_MPU9150},
+ {"mpu9250", INV_MPU9250},
+ {"mpu9255", INV_MPU9255},
+ {"icm20608", INV_ICM20608},
+ {"icm20608d", INV_ICM20608D},
+ {"icm20609", INV_ICM20609},
+ {"icm20689", INV_ICM20689},
+ {"icm20602", INV_ICM20602},
+ {"icm20690", INV_ICM20690},
+ {"iam20680", INV_IAM20680},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
+
+static const struct of_device_id inv_of_match[] = {
+ {
+ .compatible = "invensense,mpu6050",
+ .data = (void *)INV_MPU6050
+ },
+ {
+ .compatible = "invensense,mpu6500",
+ .data = (void *)INV_MPU6500
+ },
+ {
+ .compatible = "invensense,mpu6515",
+ .data = (void *)INV_MPU6515
+ },
+ {
+ .compatible = "invensense,mpu6880",
+ .data = (void *)INV_MPU6880
+ },
+ {
+ .compatible = "invensense,mpu9150",
+ .data = (void *)INV_MPU9150
+ },
+ {
+ .compatible = "invensense,mpu9250",
+ .data = (void *)INV_MPU9250
+ },
+ {
+ .compatible = "invensense,mpu9255",
+ .data = (void *)INV_MPU9255
+ },
+ {
+ .compatible = "invensense,icm20608",
+ .data = (void *)INV_ICM20608
+ },
+ {
+ .compatible = "invensense,icm20608d",
+ .data = (void *)INV_ICM20608D
+ },
+ {
+ .compatible = "invensense,icm20609",
+ .data = (void *)INV_ICM20609
+ },
+ {
+ .compatible = "invensense,icm20689",
+ .data = (void *)INV_ICM20689
+ },
+ {
+ .compatible = "invensense,icm20602",
+ .data = (void *)INV_ICM20602
+ },
+ {
+ .compatible = "invensense,icm20690",
+ .data = (void *)INV_ICM20690
+ },
+ {
+ .compatible = "invensense,iam20680",
+ .data = (void *)INV_IAM20680
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, inv_of_match);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+ {"INVN6500", INV_MPU6500},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct i2c_driver inv_mpu_driver = {
+ .probe = inv_mpu_probe,
+ .remove = inv_mpu_remove,
+ .id_table = inv_mpu_id,
+ .driver = {
+ .of_match_table = inv_of_match,
+ .acpi_match_table = inv_acpi_match,
+ .name = "inv-mpu6050-i2c",
+ .pm = &inv_mpu_pmops,
+ },
+};
+
+module_i2c_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Invensense device MPU6050 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
new file mode 100644
index 000000000..94b54c501
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -0,0 +1,474 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#ifndef INV_MPU_IIO_H_
+#define INV_MPU_IIO_H_
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/mutex.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/regmap.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/platform_data/invensense_mpu6050.h>
+
+/**
+ * struct inv_mpu6050_reg_map - Notable registers.
+ * @sample_rate_div: Divider applied to gyro output rate.
+ * @lpf: Configures internal low pass filter.
+ * @accel_lpf: Configures accelerometer low pass filter.
+ * @user_ctrl: Enables/resets the FIFO.
+ * @fifo_en: Determines which data will appear in FIFO.
+ * @gyro_config: gyro config register.
+ * @accl_config: accel config register
+ * @fifo_count_h: Upper byte of FIFO count.
+ * @fifo_r_w: FIFO register.
+ * @raw_gyro: Address of first gyro register.
+ * @raw_accl: Address of first accel register.
+ * @temperature: temperature register
+ * @int_enable: Interrupt enable register.
+ * @int_status: Interrupt status register.
+ * @pwr_mgmt_1: Controls chip's power state and clock source.
+ * @pwr_mgmt_2: Controls power state of individual sensors.
+ * @int_pin_cfg; Controls interrupt pin configuration.
+ * @accl_offset: Controls the accelerometer calibration offset.
+ * @gyro_offset: Controls the gyroscope calibration offset.
+ * @i2c_if: Controls the i2c interface
+ */
+struct inv_mpu6050_reg_map {
+ u8 sample_rate_div;
+ u8 lpf;
+ u8 accel_lpf;
+ u8 user_ctrl;
+ u8 fifo_en;
+ u8 gyro_config;
+ u8 accl_config;
+ u8 fifo_count_h;
+ u8 fifo_r_w;
+ u8 raw_gyro;
+ u8 raw_accl;
+ u8 temperature;
+ u8 int_enable;
+ u8 int_status;
+ u8 pwr_mgmt_1;
+ u8 pwr_mgmt_2;
+ u8 int_pin_cfg;
+ u8 accl_offset;
+ u8 gyro_offset;
+ u8 i2c_if;
+};
+
+/*device enum */
+enum inv_devices {
+ INV_MPU6050,
+ INV_MPU6500,
+ INV_MPU6515,
+ INV_MPU6880,
+ INV_MPU6000,
+ INV_MPU9150,
+ INV_MPU9250,
+ INV_MPU9255,
+ INV_ICM20608,
+ INV_ICM20608D,
+ INV_ICM20609,
+ INV_ICM20689,
+ INV_ICM20602,
+ INV_ICM20690,
+ INV_IAM20680,
+ INV_NUM_PARTS
+};
+
+/* chip sensors mask: accelerometer, gyroscope, temperature, magnetometer */
+#define INV_MPU6050_SENSOR_ACCL BIT(0)
+#define INV_MPU6050_SENSOR_GYRO BIT(1)
+#define INV_MPU6050_SENSOR_TEMP BIT(2)
+#define INV_MPU6050_SENSOR_MAGN BIT(3)
+
+/**
+ * struct inv_mpu6050_chip_config - Cached chip configuration data.
+ * @clk: selected chip clock
+ * @fsr: Full scale range.
+ * @lpf: Digital low pass filter frequency.
+ * @accl_fs: accel full scale range.
+ * @accl_en: accel engine enabled
+ * @gyro_en: gyro engine enabled
+ * @temp_en: temperature sensor enabled
+ * @magn_en: magn engine (i2c master) enabled
+ * @accl_fifo_enable: enable accel data output
+ * @gyro_fifo_enable: enable gyro data output
+ * @temp_fifo_enable: enable temp data output
+ * @magn_fifo_enable: enable magn data output
+ * @divider: chip sample rate divider (sample rate divider - 1)
+ */
+struct inv_mpu6050_chip_config {
+ unsigned int clk:3;
+ unsigned int fsr:2;
+ unsigned int lpf:3;
+ unsigned int accl_fs:2;
+ unsigned int accl_en:1;
+ unsigned int gyro_en:1;
+ unsigned int temp_en:1;
+ unsigned int magn_en:1;
+ unsigned int accl_fifo_enable:1;
+ unsigned int gyro_fifo_enable:1;
+ unsigned int temp_fifo_enable:1;
+ unsigned int magn_fifo_enable:1;
+ u8 divider;
+ u8 user_ctrl;
+};
+
+/*
+ * Maximum of 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8.
+ * May be less if fewer channels are enabled, as long as the timestamp
+ * remains 8 byte aligned
+ */
+#define INV_MPU6050_OUTPUT_DATA_SIZE 32
+
+/**
+ * struct inv_mpu6050_hw - Other important hardware information.
+ * @whoami: Self identification byte from WHO_AM_I register
+ * @name: name of the chip.
+ * @reg: register map of the chip.
+ * @config: configuration of the chip.
+ * @fifo_size: size of the FIFO in bytes.
+ * @temp: offset and scale to apply to raw temperature.
+ */
+struct inv_mpu6050_hw {
+ u8 whoami;
+ u8 *name;
+ const struct inv_mpu6050_reg_map *reg;
+ const struct inv_mpu6050_chip_config *config;
+ size_t fifo_size;
+ struct {
+ int offset;
+ int scale;
+ } temp;
+ struct {
+ unsigned int accel;
+ unsigned int gyro;
+ } startup_time;
+};
+
+/*
+ * struct inv_mpu6050_state - Driver state variables.
+ * @lock: Chip access lock.
+ * @trig: IIO trigger.
+ * @chip_config: Cached attribute information.
+ * @reg: Map of important registers.
+ * @hw: Other hardware-specific information.
+ * @chip_type: chip type.
+ * @plat_data: platform data (deprecated in favor of @orientation).
+ * @orientation: sensor chip orientation relative to main hardware.
+ * @map regmap pointer.
+ * @irq interrupt number.
+ * @irq_mask the int_pin_cfg mask to configure interrupt type.
+ * @chip_period: chip internal period estimation (~1kHz).
+ * @it_timestamp: timestamp from previous interrupt.
+ * @data_timestamp: timestamp for next data sample.
+ * @vdd_supply: VDD voltage regulator for the chip.
+ * @vddio_supply I/O voltage regulator for the chip.
+ * @magn_disabled: magnetometer disabled for backward compatibility reason.
+ * @magn_raw_to_gauss: coefficient to convert mag raw value to Gauss.
+ * @magn_orient: magnetometer sensor chip orientation if available.
+ * @suspended_sensors: sensors mask of sensors turned off for suspend
+ * @data: dma safe buffer used for bulk reads.
+ */
+struct inv_mpu6050_state {
+ struct mutex lock;
+ struct iio_trigger *trig;
+ struct inv_mpu6050_chip_config chip_config;
+ const struct inv_mpu6050_reg_map *reg;
+ const struct inv_mpu6050_hw *hw;
+ enum inv_devices chip_type;
+ struct i2c_mux_core *muxc;
+ struct i2c_client *mux_client;
+ struct inv_mpu6050_platform_data plat_data;
+ struct iio_mount_matrix orientation;
+ struct regmap *map;
+ int irq;
+ u8 irq_mask;
+ unsigned skip_samples;
+ s64 chip_period;
+ s64 it_timestamp;
+ s64 data_timestamp;
+ struct regulator *vdd_supply;
+ struct regulator *vddio_supply;
+ bool magn_disabled;
+ s32 magn_raw_to_gauss[3];
+ struct iio_mount_matrix magn_orient;
+ unsigned int suspended_sensors;
+ u8 data[INV_MPU6050_OUTPUT_DATA_SIZE] __aligned(IIO_DMA_MINALIGN);
+};
+
+/*register and associated bit definition*/
+#define INV_MPU6050_REG_ACCEL_OFFSET 0x06
+#define INV_MPU6050_REG_GYRO_OFFSET 0x13
+
+#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
+#define INV_MPU6050_REG_CONFIG 0x1A
+#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
+#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
+
+#define INV_MPU6050_REG_FIFO_EN 0x23
+#define INV_MPU6050_BIT_SLAVE_0 0x01
+#define INV_MPU6050_BIT_SLAVE_1 0x02
+#define INV_MPU6050_BIT_SLAVE_2 0x04
+#define INV_MPU6050_BIT_ACCEL_OUT 0x08
+#define INV_MPU6050_BITS_GYRO_OUT 0x70
+#define INV_MPU6050_BIT_TEMP_OUT 0x80
+
+#define INV_MPU6050_REG_I2C_MST_CTRL 0x24
+#define INV_MPU6050_BITS_I2C_MST_CLK_400KHZ 0x0D
+#define INV_MPU6050_BIT_I2C_MST_P_NSR 0x10
+#define INV_MPU6050_BIT_SLV3_FIFO_EN 0x20
+#define INV_MPU6050_BIT_WAIT_FOR_ES 0x40
+#define INV_MPU6050_BIT_MULT_MST_EN 0x80
+
+/* control I2C slaves from 0 to 3 */
+#define INV_MPU6050_REG_I2C_SLV_ADDR(_x) (0x25 + 3 * (_x))
+#define INV_MPU6050_BIT_I2C_SLV_RNW 0x80
+
+#define INV_MPU6050_REG_I2C_SLV_REG(_x) (0x26 + 3 * (_x))
+
+#define INV_MPU6050_REG_I2C_SLV_CTRL(_x) (0x27 + 3 * (_x))
+#define INV_MPU6050_BIT_SLV_GRP 0x10
+#define INV_MPU6050_BIT_SLV_REG_DIS 0x20
+#define INV_MPU6050_BIT_SLV_BYTE_SW 0x40
+#define INV_MPU6050_BIT_SLV_EN 0x80
+
+/* I2C master delay register */
+#define INV_MPU6050_REG_I2C_SLV4_CTRL 0x34
+#define INV_MPU6050_BITS_I2C_MST_DLY(_x) ((_x) & 0x1F)
+
+#define INV_MPU6050_REG_I2C_MST_STATUS 0x36
+#define INV_MPU6050_BIT_I2C_SLV0_NACK 0x01
+#define INV_MPU6050_BIT_I2C_SLV1_NACK 0x02
+#define INV_MPU6050_BIT_I2C_SLV2_NACK 0x04
+#define INV_MPU6050_BIT_I2C_SLV3_NACK 0x08
+
+#define INV_MPU6050_REG_INT_ENABLE 0x38
+#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
+#define INV_MPU6050_BIT_DMP_INT_EN 0x02
+
+#define INV_MPU6050_REG_RAW_ACCEL 0x3B
+#define INV_MPU6050_REG_TEMPERATURE 0x41
+#define INV_MPU6050_REG_RAW_GYRO 0x43
+
+#define INV_MPU6050_REG_INT_STATUS 0x3A
+#define INV_MPU6050_BIT_FIFO_OVERFLOW_INT 0x10
+#define INV_MPU6050_BIT_RAW_DATA_RDY_INT 0x01
+
+#define INV_MPU6050_REG_EXT_SENS_DATA 0x49
+
+/* I2C slaves data output from 0 to 3 */
+#define INV_MPU6050_REG_I2C_SLV_DO(_x) (0x63 + (_x))
+
+#define INV_MPU6050_REG_I2C_MST_DELAY_CTRL 0x67
+#define INV_MPU6050_BIT_I2C_SLV0_DLY_EN 0x01
+#define INV_MPU6050_BIT_I2C_SLV1_DLY_EN 0x02
+#define INV_MPU6050_BIT_I2C_SLV2_DLY_EN 0x04
+#define INV_MPU6050_BIT_I2C_SLV3_DLY_EN 0x08
+#define INV_MPU6050_BIT_DELAY_ES_SHADOW 0x80
+
+#define INV_MPU6050_REG_SIGNAL_PATH_RESET 0x68
+#define INV_MPU6050_BIT_TEMP_RST BIT(0)
+#define INV_MPU6050_BIT_ACCEL_RST BIT(1)
+#define INV_MPU6050_BIT_GYRO_RST BIT(2)
+
+#define INV_MPU6050_REG_USER_CTRL 0x6A
+#define INV_MPU6050_BIT_SIG_COND_RST 0x01
+#define INV_MPU6050_BIT_FIFO_RST 0x04
+#define INV_MPU6050_BIT_DMP_RST 0x08
+#define INV_MPU6050_BIT_I2C_MST_EN 0x20
+#define INV_MPU6050_BIT_FIFO_EN 0x40
+#define INV_MPU6050_BIT_DMP_EN 0x80
+#define INV_MPU6050_BIT_I2C_IF_DIS 0x10
+
+#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
+#define INV_MPU6050_BIT_H_RESET 0x80
+#define INV_MPU6050_BIT_SLEEP 0x40
+#define INV_MPU6050_BIT_TEMP_DIS 0x08
+#define INV_MPU6050_BIT_CLK_MASK 0x7
+
+#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
+#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
+
+/* ICM20602 register */
+#define INV_ICM20602_REG_I2C_IF 0x70
+#define INV_ICM20602_BIT_I2C_IF_DIS 0x40
+
+#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
+#define INV_MPU6050_REG_FIFO_R_W 0x74
+
+#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
+#define INV_MPU6050_FIFO_COUNT_BYTE 2
+
+/* MPU9X50 9-axis magnetometer */
+#define INV_MPU9X50_BYTES_MAGN 7
+
+/* FIFO temperature sample size */
+#define INV_MPU6050_BYTES_PER_TEMP_SENSOR 2
+
+/* mpu6500 registers */
+#define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D
+#define INV_ICM20689_BITS_FIFO_SIZE_MAX 0xC0
+#define INV_MPU6500_REG_ACCEL_OFFSET 0x77
+
+/* delay time in milliseconds */
+#define INV_MPU6050_POWER_UP_TIME 100
+#define INV_MPU6050_TEMP_UP_TIME 100
+#define INV_MPU6050_ACCEL_STARTUP_TIME 20
+#define INV_MPU6050_GYRO_STARTUP_TIME 60
+#define INV_MPU6050_GYRO_DOWN_TIME 150
+#define INV_MPU6050_SUSPEND_DELAY_MS 2000
+
+#define INV_MPU6500_GYRO_STARTUP_TIME 70
+#define INV_MPU6500_ACCEL_STARTUP_TIME 30
+
+#define INV_ICM20602_GYRO_STARTUP_TIME 100
+#define INV_ICM20602_ACCEL_STARTUP_TIME 20
+
+#define INV_ICM20690_GYRO_STARTUP_TIME 80
+#define INV_ICM20690_ACCEL_STARTUP_TIME 10
+
+
+/* delay time in microseconds */
+#define INV_MPU6050_REG_UP_TIME_MIN 5000
+#define INV_MPU6050_REG_UP_TIME_MAX 10000
+
+#define INV_MPU6050_TEMP_OFFSET 12420
+#define INV_MPU6050_TEMP_SCALE 2941176
+#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
+#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
+#define INV_MPU6050_THREE_AXIS 3
+#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
+#define INV_ICM20690_GYRO_CONFIG_FSR_SHIFT 2
+#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
+
+#define INV_MPU6500_TEMP_OFFSET 7011
+#define INV_MPU6500_TEMP_SCALE 2995178
+
+#define INV_ICM20608_TEMP_OFFSET 8170
+#define INV_ICM20608_TEMP_SCALE 3059976
+
+#define INV_MPU6050_REG_INT_PIN_CFG 0x37
+#define INV_MPU6050_ACTIVE_HIGH 0x00
+#define INV_MPU6050_ACTIVE_LOW 0x80
+/* enable level triggering */
+#define INV_MPU6050_LATCH_INT_EN 0x20
+#define INV_MPU6050_BIT_BYPASS_EN 0x2
+
+/* Allowed timestamp period jitter in percent */
+#define INV_MPU6050_TS_PERIOD_JITTER 4
+
+/* init parameters */
+#define INV_MPU6050_MAX_FIFO_RATE 1000
+#define INV_MPU6050_MIN_FIFO_RATE 4
+
+/* chip internal frequency: 1KHz */
+#define INV_MPU6050_INTERNAL_FREQ_HZ 1000
+/* return the frequency divider (chip sample rate divider + 1) */
+#define INV_MPU6050_FREQ_DIVIDER(st) \
+ ((st)->chip_config.divider + 1)
+/* chip sample rate divider to fifo rate */
+#define INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate) \
+ ((INV_MPU6050_INTERNAL_FREQ_HZ / (fifo_rate)) - 1)
+#define INV_MPU6050_DIVIDER_TO_FIFO_RATE(divider) \
+ (INV_MPU6050_INTERNAL_FREQ_HZ / ((divider) + 1))
+
+#define INV_MPU6050_REG_WHOAMI 117
+
+#define INV_MPU6000_WHOAMI_VALUE 0x68
+#define INV_MPU6050_WHOAMI_VALUE 0x68
+#define INV_MPU6500_WHOAMI_VALUE 0x70
+#define INV_MPU6880_WHOAMI_VALUE 0x78
+#define INV_MPU9150_WHOAMI_VALUE 0x68
+#define INV_MPU9250_WHOAMI_VALUE 0x71
+#define INV_MPU9255_WHOAMI_VALUE 0x73
+#define INV_MPU6515_WHOAMI_VALUE 0x74
+#define INV_ICM20608_WHOAMI_VALUE 0xAF
+#define INV_ICM20608D_WHOAMI_VALUE 0xAE
+#define INV_ICM20609_WHOAMI_VALUE 0xA6
+#define INV_ICM20689_WHOAMI_VALUE 0x98
+#define INV_ICM20602_WHOAMI_VALUE 0x12
+#define INV_ICM20690_WHOAMI_VALUE 0x20
+#define INV_IAM20680_WHOAMI_VALUE 0xA9
+
+/* scan element definition for generic MPU6xxx devices */
+enum inv_mpu6050_scan {
+ INV_MPU6050_SCAN_ACCL_X,
+ INV_MPU6050_SCAN_ACCL_Y,
+ INV_MPU6050_SCAN_ACCL_Z,
+ INV_MPU6050_SCAN_TEMP,
+ INV_MPU6050_SCAN_GYRO_X,
+ INV_MPU6050_SCAN_GYRO_Y,
+ INV_MPU6050_SCAN_GYRO_Z,
+ INV_MPU6050_SCAN_TIMESTAMP,
+
+ INV_MPU9X50_SCAN_MAGN_X = INV_MPU6050_SCAN_GYRO_Z + 1,
+ INV_MPU9X50_SCAN_MAGN_Y,
+ INV_MPU9X50_SCAN_MAGN_Z,
+ INV_MPU9X50_SCAN_TIMESTAMP,
+};
+
+enum inv_mpu6050_filter_e {
+ INV_MPU6050_FILTER_NOLPF2 = 0,
+ INV_MPU6050_FILTER_200HZ,
+ INV_MPU6050_FILTER_100HZ,
+ INV_MPU6050_FILTER_45HZ,
+ INV_MPU6050_FILTER_20HZ,
+ INV_MPU6050_FILTER_10HZ,
+ INV_MPU6050_FILTER_5HZ,
+ INV_MPU6050_FILTER_NOLPF,
+ NUM_MPU6050_FILTER
+};
+
+/* IIO attribute address */
+enum INV_MPU6050_IIO_ATTR_ADDR {
+ ATTR_GYRO_MATRIX,
+ ATTR_ACCL_MATRIX,
+};
+
+enum inv_mpu6050_accl_fs_e {
+ INV_MPU6050_FS_02G = 0,
+ INV_MPU6050_FS_04G,
+ INV_MPU6050_FS_08G,
+ INV_MPU6050_FS_16G,
+ NUM_ACCL_FSR
+};
+
+enum inv_mpu6050_fsr_e {
+ INV_MPU6050_FSR_250DPS = 0,
+ INV_MPU6050_FSR_500DPS,
+ INV_MPU6050_FSR_1000DPS,
+ INV_MPU6050_FSR_2000DPS,
+ NUM_MPU6050_FSR
+};
+
+enum inv_mpu6050_clock_sel_e {
+ INV_CLK_INTERNAL = 0,
+ INV_CLK_PLL,
+ NUM_CLK
+};
+
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type);
+int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable);
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en,
+ unsigned int mask);
+int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client);
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client);
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+ int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type);
+extern const struct dev_pm_ops inv_mpu_pmops;
+
+#endif
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
new file mode 100644
index 000000000..6aee6c989
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/string.h>
+
+#include "inv_mpu_aux.h"
+#include "inv_mpu_iio.h"
+#include "inv_mpu_magn.h"
+
+/*
+ * MPU9xxx magnetometer are AKM chips on I2C aux bus
+ * MPU9150 is AK8975
+ * MPU9250 is AK8963
+ */
+#define INV_MPU_MAGN_I2C_ADDR 0x0C
+
+#define INV_MPU_MAGN_REG_WIA 0x00
+#define INV_MPU_MAGN_BITS_WIA 0x48
+
+#define INV_MPU_MAGN_REG_ST1 0x02
+#define INV_MPU_MAGN_BIT_DRDY 0x01
+#define INV_MPU_MAGN_BIT_DOR 0x02
+
+#define INV_MPU_MAGN_REG_DATA 0x03
+
+#define INV_MPU_MAGN_REG_ST2 0x09
+#define INV_MPU_MAGN_BIT_HOFL 0x08
+#define INV_MPU_MAGN_BIT_BITM 0x10
+
+#define INV_MPU_MAGN_REG_CNTL1 0x0A
+#define INV_MPU_MAGN_BITS_MODE_PWDN 0x00
+#define INV_MPU_MAGN_BITS_MODE_SINGLE 0x01
+#define INV_MPU_MAGN_BITS_MODE_FUSE 0x0F
+#define INV_MPU9250_MAGN_BIT_OUTPUT_BIT 0x10
+
+#define INV_MPU9250_MAGN_REG_CNTL2 0x0B
+#define INV_MPU9250_MAGN_BIT_SRST 0x01
+
+#define INV_MPU_MAGN_REG_ASAX 0x10
+#define INV_MPU_MAGN_REG_ASAY 0x11
+#define INV_MPU_MAGN_REG_ASAZ 0x12
+
+static bool inv_magn_supported(const struct inv_mpu6050_state *st)
+{
+ switch (st->chip_type) {
+ case INV_MPU9150:
+ case INV_MPU9250:
+ case INV_MPU9255:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* init magnetometer chip */
+static int inv_magn_init(struct inv_mpu6050_state *st)
+{
+ uint8_t val;
+ uint8_t asa[3];
+ int32_t sensitivity;
+ int ret;
+
+ /* check whoami */
+ ret = inv_mpu_aux_read(st, INV_MPU_MAGN_I2C_ADDR, INV_MPU_MAGN_REG_WIA,
+ &val, sizeof(val));
+ if (ret)
+ return ret;
+ if (val != INV_MPU_MAGN_BITS_WIA)
+ return -ENODEV;
+
+ /* software reset for MPU925x only */
+ switch (st->chip_type) {
+ case INV_MPU9250:
+ case INV_MPU9255:
+ ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
+ INV_MPU9250_MAGN_REG_CNTL2,
+ INV_MPU9250_MAGN_BIT_SRST);
+ if (ret)
+ return ret;
+ break;
+ default:
+ break;
+ }
+
+ /* read fuse ROM data */
+ ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
+ INV_MPU_MAGN_REG_CNTL1,
+ INV_MPU_MAGN_BITS_MODE_FUSE);
+ if (ret)
+ return ret;
+
+ ret = inv_mpu_aux_read(st, INV_MPU_MAGN_I2C_ADDR, INV_MPU_MAGN_REG_ASAX,
+ asa, sizeof(asa));
+ if (ret)
+ return ret;
+
+ /* switch back to power-down */
+ ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
+ INV_MPU_MAGN_REG_CNTL1,
+ INV_MPU_MAGN_BITS_MODE_PWDN);
+ if (ret)
+ return ret;
+
+ /*
+ * Sensor sentivity
+ * 1 uT = 0.01 G and value is in micron (1e6)
+ * sensitvity = x uT * 0.01 * 1e6
+ */
+ switch (st->chip_type) {
+ case INV_MPU9150:
+ /* sensor sensitivity is 0.3 uT */
+ sensitivity = 3000;
+ break;
+ case INV_MPU9250:
+ case INV_MPU9255:
+ /* sensor sensitivity in 16 bits mode: 0.15 uT */
+ sensitivity = 1500;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Sensitivity adjustement and scale to Gauss
+ *
+ * Hadj = H * (((ASA - 128) * 0.5 / 128) + 1)
+ * Factor simplification:
+ * Hadj = H * ((ASA + 128) / 256)
+ *
+ * raw_to_gauss = Hadj * sensitivity
+ */
+ st->magn_raw_to_gauss[0] = (((int32_t)asa[0] + 128) * sensitivity) / 256;
+ st->magn_raw_to_gauss[1] = (((int32_t)asa[1] + 128) * sensitivity) / 256;
+ st->magn_raw_to_gauss[2] = (((int32_t)asa[2] + 128) * sensitivity) / 256;
+
+ return 0;
+}
+
+/**
+ * inv_mpu_magn_probe() - probe and setup magnetometer chip
+ * @st: driver internal state
+ *
+ * Returns 0 on success, a negative error code otherwise
+ *
+ * It is probing the chip and setting up all needed i2c transfers.
+ * Noop if there is no magnetometer in the chip.
+ */
+int inv_mpu_magn_probe(struct inv_mpu6050_state *st)
+{
+ uint8_t val;
+ int ret;
+
+ /* quit if chip is not supported */
+ if (!inv_magn_supported(st))
+ return 0;
+
+ /* configure i2c master aux port */
+ ret = inv_mpu_aux_init(st);
+ if (ret)
+ return ret;
+
+ /* check and init mag chip */
+ ret = inv_magn_init(st);
+ if (ret)
+ return ret;
+
+ /*
+ * configure mpu i2c master accesses
+ * i2c SLV0: read sensor data, 7 bytes data(6)-ST2
+ * Byte swap data to store them in big-endian in impair address groups
+ */
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(0),
+ INV_MPU6050_BIT_I2C_SLV_RNW | INV_MPU_MAGN_I2C_ADDR);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(0),
+ INV_MPU_MAGN_REG_DATA);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(0),
+ INV_MPU6050_BIT_SLV_EN |
+ INV_MPU6050_BIT_SLV_BYTE_SW |
+ INV_MPU6050_BIT_SLV_GRP |
+ INV_MPU9X50_BYTES_MAGN);
+ if (ret)
+ return ret;
+
+ /* i2c SLV1: launch single measurement */
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_ADDR(1),
+ INV_MPU_MAGN_I2C_ADDR);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_REG(1),
+ INV_MPU_MAGN_REG_CNTL1);
+ if (ret)
+ return ret;
+
+ /* add 16 bits mode for MPU925x */
+ val = INV_MPU_MAGN_BITS_MODE_SINGLE;
+ switch (st->chip_type) {
+ case INV_MPU9250:
+ case INV_MPU9255:
+ val |= INV_MPU9250_MAGN_BIT_OUTPUT_BIT;
+ break;
+ default:
+ break;
+ }
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_DO(1), val);
+ if (ret)
+ return ret;
+
+ return regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_CTRL(1),
+ INV_MPU6050_BIT_SLV_EN | 1);
+}
+
+/**
+ * inv_mpu_magn_set_rate() - set magnetometer sampling rate
+ * @st: driver internal state
+ * @fifo_rate: mpu set fifo rate
+ *
+ * Returns 0 on success, a negative error code otherwise
+ *
+ * Limit sampling frequency to the maximum value supported by the
+ * magnetometer chip. Resulting in duplicated data for higher frequencies.
+ * Noop if there is no magnetometer in the chip.
+ */
+int inv_mpu_magn_set_rate(const struct inv_mpu6050_state *st, int fifo_rate)
+{
+ uint8_t d;
+
+ /* quit if chip is not supported */
+ if (!inv_magn_supported(st))
+ return 0;
+
+ /*
+ * update i2c master delay to limit mag sampling to max frequency
+ * compute fifo_rate divider d: rate = fifo_rate / (d + 1)
+ */
+ if (fifo_rate > INV_MPU_MAGN_FREQ_HZ_MAX)
+ d = fifo_rate / INV_MPU_MAGN_FREQ_HZ_MAX - 1;
+ else
+ d = 0;
+
+ return regmap_write(st->map, INV_MPU6050_REG_I2C_SLV4_CTRL, d);
+}
+
+/**
+ * inv_mpu_magn_set_orient() - fill magnetometer mounting matrix
+ * @st: driver internal state
+ *
+ * Returns 0 on success, a negative error code otherwise
+ *
+ * Fill magnetometer mounting matrix using the provided chip matrix.
+ */
+int inv_mpu_magn_set_orient(struct inv_mpu6050_state *st)
+{
+ struct device *dev = regmap_get_device(st->map);
+ const char *orient;
+ char *str;
+ int i;
+
+ /* fill magnetometer orientation */
+ switch (st->chip_type) {
+ case INV_MPU9150:
+ case INV_MPU9250:
+ case INV_MPU9255:
+ /* x <- y */
+ st->magn_orient.rotation[0] = st->orientation.rotation[3];
+ st->magn_orient.rotation[1] = st->orientation.rotation[4];
+ st->magn_orient.rotation[2] = st->orientation.rotation[5];
+ /* y <- x */
+ st->magn_orient.rotation[3] = st->orientation.rotation[0];
+ st->magn_orient.rotation[4] = st->orientation.rotation[1];
+ st->magn_orient.rotation[5] = st->orientation.rotation[2];
+ /* z <- -z */
+ for (i = 6; i < 9; ++i) {
+ orient = st->orientation.rotation[i];
+
+ /*
+ * The value is negated according to one of the following
+ * rules:
+ *
+ * 1) Drop leading minus.
+ * 2) Leave 0 as is.
+ * 3) Add leading minus.
+ */
+ if (orient[0] == '-')
+ str = devm_kstrdup(dev, orient + 1, GFP_KERNEL);
+ else if (!strcmp(orient, "0"))
+ str = devm_kstrdup(dev, orient, GFP_KERNEL);
+ else
+ str = devm_kasprintf(dev, GFP_KERNEL, "-%s", orient);
+ if (!str)
+ return -ENOMEM;
+
+ st->magn_orient.rotation[i] = str;
+ }
+ break;
+ default:
+ st->magn_orient = st->orientation;
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * inv_mpu_magn_read() - read magnetometer data
+ * @st: driver internal state
+ * @axis: IIO modifier axis value
+ * @val: store corresponding axis value
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+int inv_mpu_magn_read(struct inv_mpu6050_state *st, int axis, int *val)
+{
+ unsigned int status;
+ __be16 data;
+ uint8_t addr;
+ int ret;
+
+ /* quit if chip is not supported */
+ if (!inv_magn_supported(st))
+ return -ENODEV;
+
+ /* Mag data: XH,XL,YH,YL,ZH,ZL */
+ switch (axis) {
+ case IIO_MOD_X:
+ addr = 0;
+ break;
+ case IIO_MOD_Y:
+ addr = 2;
+ break;
+ case IIO_MOD_Z:
+ addr = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+ addr += INV_MPU6050_REG_EXT_SENS_DATA;
+
+ /* check i2c status and read raw data */
+ ret = regmap_read(st->map, INV_MPU6050_REG_I2C_MST_STATUS, &status);
+ if (ret)
+ return ret;
+
+ if (status & INV_MPU6050_BIT_I2C_SLV0_NACK ||
+ status & INV_MPU6050_BIT_I2C_SLV1_NACK)
+ return -EIO;
+
+ ret = regmap_bulk_read(st->map, addr, &data, sizeof(data));
+ if (ret)
+ return ret;
+
+ *val = (int16_t)be16_to_cpu(data);
+
+ return IIO_VAL_INT;
+}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h
new file mode 100644
index 000000000..185c000c6
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 TDK-InvenSense, Inc.
+ */
+
+#ifndef INV_MPU_MAGN_H_
+#define INV_MPU_MAGN_H_
+
+#include <linux/kernel.h>
+
+#include "inv_mpu_iio.h"
+
+/* Magnetometer maximum frequency */
+#define INV_MPU_MAGN_FREQ_HZ_MAX 50
+
+int inv_mpu_magn_probe(struct inv_mpu6050_state *st);
+
+/**
+ * inv_mpu_magn_get_scale() - get magnetometer scale value
+ * @st: driver internal state
+ *
+ * Returns IIO data format.
+ */
+static inline int inv_mpu_magn_get_scale(const struct inv_mpu6050_state *st,
+ const struct iio_chan_spec *chan,
+ int *val, int *val2)
+{
+ *val = 0;
+ *val2 = st->magn_raw_to_gauss[chan->address];
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+int inv_mpu_magn_set_rate(const struct inv_mpu6050_state *st, int fifo_rate);
+
+int inv_mpu_magn_set_orient(struct inv_mpu6050_state *st);
+
+int inv_mpu_magn_read(struct inv_mpu6050_state *st, int axis, int *val);
+
+#endif /* INV_MPU_MAGN_H_ */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
new file mode 100644
index 000000000..45c37525c
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/poll.h>
+#include <linux/math64.h>
+#include "inv_mpu_iio.h"
+
+/**
+ * inv_mpu6050_update_period() - Update chip internal period estimation
+ *
+ * @st: driver state
+ * @timestamp: the interrupt timestamp
+ * @nb: number of data set in the fifo
+ *
+ * This function uses interrupt timestamps to estimate the chip period and
+ * to choose the data timestamp to come.
+ */
+static void inv_mpu6050_update_period(struct inv_mpu6050_state *st,
+ s64 timestamp, size_t nb)
+{
+ /* Period boundaries for accepting timestamp */
+ const s64 period_min =
+ (NSEC_PER_MSEC * (100 - INV_MPU6050_TS_PERIOD_JITTER)) / 100;
+ const s64 period_max =
+ (NSEC_PER_MSEC * (100 + INV_MPU6050_TS_PERIOD_JITTER)) / 100;
+ const s32 divider = INV_MPU6050_FREQ_DIVIDER(st);
+ s64 delta, interval;
+ bool use_it_timestamp = false;
+
+ if (st->it_timestamp == 0) {
+ /* not initialized, forced to use it_timestamp */
+ use_it_timestamp = true;
+ } else if (nb == 1) {
+ /*
+ * Validate the use of it timestamp by checking if interrupt
+ * has been delayed.
+ * nb > 1 means interrupt was delayed for more than 1 sample,
+ * so it's obviously not good.
+ * Compute the chip period between 2 interrupts for validating.
+ */
+ delta = div_s64(timestamp - st->it_timestamp, divider);
+ if (delta > period_min && delta < period_max) {
+ /* update chip period and use it timestamp */
+ st->chip_period = (st->chip_period + delta) / 2;
+ use_it_timestamp = true;
+ }
+ }
+
+ if (use_it_timestamp) {
+ /*
+ * Manage case of multiple samples in the fifo (nb > 1):
+ * compute timestamp corresponding to the first sample using
+ * estimated chip period.
+ */
+ interval = (nb - 1) * st->chip_period * divider;
+ st->data_timestamp = timestamp - interval;
+ }
+
+ /* save it timestamp */
+ st->it_timestamp = timestamp;
+}
+
+/**
+ * inv_mpu6050_get_timestamp() - Return the current data timestamp
+ *
+ * @st: driver state
+ * @return: current data timestamp
+ *
+ * This function returns the current data timestamp and prepares for next one.
+ */
+static s64 inv_mpu6050_get_timestamp(struct inv_mpu6050_state *st)
+{
+ s64 ts;
+
+ /* return current data timestamp and increment */
+ ts = st->data_timestamp;
+ st->data_timestamp += st->chip_period * INV_MPU6050_FREQ_DIVIDER(st);
+
+ return ts;
+}
+
+static int inv_reset_fifo(struct iio_dev *indio_dev)
+{
+ int result;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ /* disable fifo and reenable it */
+ inv_mpu6050_prepare_fifo(st, false);
+ result = inv_mpu6050_prepare_fifo(st, true);
+ if (result)
+ goto reset_fifo_fail;
+
+ return 0;
+
+reset_fifo_fail:
+ dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result);
+ result = regmap_write(st->map, st->reg->int_enable,
+ INV_MPU6050_BIT_DATA_RDY_EN);
+
+ return result;
+}
+
+/*
+ * inv_mpu6050_read_fifo() - Transfer data from hardware FIFO to KFIFO.
+ */
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ size_t bytes_per_datum;
+ int result;
+ u16 fifo_count;
+ s64 timestamp;
+ int int_status;
+ size_t i, nb;
+
+ mutex_lock(&st->lock);
+
+ /* ack interrupt and check status */
+ result = regmap_read(st->map, st->reg->int_status, &int_status);
+ if (result) {
+ dev_err(regmap_get_device(st->map),
+ "failed to ack interrupt\n");
+ goto flush_fifo;
+ }
+ if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT))
+ goto end_session;
+
+ if (!(st->chip_config.accl_fifo_enable |
+ st->chip_config.gyro_fifo_enable |
+ st->chip_config.magn_fifo_enable))
+ goto end_session;
+ bytes_per_datum = 0;
+ if (st->chip_config.accl_fifo_enable)
+ bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
+
+ if (st->chip_config.gyro_fifo_enable)
+ bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
+
+ if (st->chip_config.temp_fifo_enable)
+ bytes_per_datum += INV_MPU6050_BYTES_PER_TEMP_SENSOR;
+
+ if (st->chip_config.magn_fifo_enable)
+ bytes_per_datum += INV_MPU9X50_BYTES_MAGN;
+
+ /*
+ * read fifo_count register to know how many bytes are inside the FIFO
+ * right now
+ */
+ result = regmap_bulk_read(st->map, st->reg->fifo_count_h,
+ st->data, INV_MPU6050_FIFO_COUNT_BYTE);
+ if (result)
+ goto end_session;
+ fifo_count = be16_to_cpup((__be16 *)&st->data[0]);
+
+ /*
+ * Handle fifo overflow by resetting fifo.
+ * Reset if there is only 3 data set free remaining to mitigate
+ * possible delay between reading fifo count and fifo data.
+ */
+ nb = 3 * bytes_per_datum;
+ if (fifo_count >= st->hw->fifo_size - nb) {
+ dev_warn(regmap_get_device(st->map), "fifo overflow reset\n");
+ goto flush_fifo;
+ }
+
+ /* compute and process all complete datum */
+ nb = fifo_count / bytes_per_datum;
+ inv_mpu6050_update_period(st, pf->timestamp, nb);
+ for (i = 0; i < nb; ++i) {
+ result = regmap_noinc_read(st->map, st->reg->fifo_r_w,
+ st->data, bytes_per_datum);
+ if (result)
+ goto flush_fifo;
+ /* skip first samples if needed */
+ if (st->skip_samples) {
+ st->skip_samples--;
+ continue;
+ }
+ timestamp = inv_mpu6050_get_timestamp(st);
+ iio_push_to_buffers_with_timestamp(indio_dev, st->data, timestamp);
+ }
+
+end_session:
+ mutex_unlock(&st->lock);
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+
+flush_fifo:
+ /* Flush HW and SW FIFOs. */
+ inv_reset_fifo(indio_dev);
+ mutex_unlock(&st->lock);
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
new file mode 100644
index 000000000..e6107b0cc
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2015 Intel Corporation Inc.
+*/
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int inv_mpu_i2c_disable(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret = 0;
+
+ if (st->reg->i2c_if) {
+ ret = regmap_write(st->map, st->reg->i2c_if,
+ INV_ICM20602_BIT_I2C_IF_DIS);
+ } else {
+ st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS;
+ ret = regmap_write(st->map, st->reg->user_ctrl,
+ st->chip_config.user_ctrl);
+ }
+
+ return ret;
+}
+
+static int inv_mpu_probe(struct spi_device *spi)
+{
+ const void *match;
+ struct regmap *regmap;
+ const struct spi_device_id *spi_id;
+ const char *name = NULL;
+ enum inv_devices chip_type;
+
+ if ((spi_id = spi_get_device_id(spi))) {
+ chip_type = (enum inv_devices)spi_id->driver_data;
+ name = spi_id->name;
+ } else if ((match = device_get_match_data(&spi->dev))) {
+ chip_type = (uintptr_t)match;
+ name = dev_name(&spi->dev);
+ } else {
+ return -ENODEV;
+ }
+
+ regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+ regmap);
+ return PTR_ERR(regmap);
+ }
+
+ return inv_mpu_core_probe(regmap, spi->irq, name,
+ inv_mpu_i2c_disable, chip_type);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct spi_device_id inv_mpu_id[] = {
+ {"mpu6000", INV_MPU6000},
+ {"mpu6500", INV_MPU6500},
+ {"mpu6515", INV_MPU6515},
+ {"mpu6880", INV_MPU6880},
+ {"mpu9250", INV_MPU9250},
+ {"mpu9255", INV_MPU9255},
+ {"icm20608", INV_ICM20608},
+ {"icm20608d", INV_ICM20608D},
+ {"icm20609", INV_ICM20609},
+ {"icm20689", INV_ICM20689},
+ {"icm20602", INV_ICM20602},
+ {"icm20690", INV_ICM20690},
+ {"iam20680", INV_IAM20680},
+ {}
+};
+
+MODULE_DEVICE_TABLE(spi, inv_mpu_id);
+
+static const struct of_device_id inv_of_match[] = {
+ {
+ .compatible = "invensense,mpu6000",
+ .data = (void *)INV_MPU6000
+ },
+ {
+ .compatible = "invensense,mpu6500",
+ .data = (void *)INV_MPU6500
+ },
+ {
+ .compatible = "invensense,mpu6515",
+ .data = (void *)INV_MPU6515
+ },
+ {
+ .compatible = "invensense,mpu6880",
+ .data = (void *)INV_MPU6880
+ },
+ {
+ .compatible = "invensense,mpu9250",
+ .data = (void *)INV_MPU9250
+ },
+ {
+ .compatible = "invensense,mpu9255",
+ .data = (void *)INV_MPU9255
+ },
+ {
+ .compatible = "invensense,icm20608",
+ .data = (void *)INV_ICM20608
+ },
+ {
+ .compatible = "invensense,icm20608d",
+ .data = (void *)INV_ICM20608D
+ },
+ {
+ .compatible = "invensense,icm20609",
+ .data = (void *)INV_ICM20609
+ },
+ {
+ .compatible = "invensense,icm20689",
+ .data = (void *)INV_ICM20689
+ },
+ {
+ .compatible = "invensense,icm20602",
+ .data = (void *)INV_ICM20602
+ },
+ {
+ .compatible = "invensense,icm20690",
+ .data = (void *)INV_ICM20690
+ },
+ {
+ .compatible = "invensense,iam20680",
+ .data = (void *)INV_IAM20680
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, inv_of_match);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+ {"INVN6000", INV_MPU6000},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct spi_driver inv_mpu_driver = {
+ .probe = inv_mpu_probe,
+ .id_table = inv_mpu_id,
+ .driver = {
+ .of_match_table = inv_of_match,
+ .acpi_match_table = inv_acpi_match,
+ .name = "inv-mpu6000-spi",
+ .pm = &inv_mpu_pmops,
+ },
+};
+
+module_spi_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Adriana Reus <adriana.reus@intel.com>");
+MODULE_DESCRIPTION("Invensense device MPU6000 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
new file mode 100644
index 000000000..882546897
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*/
+
+#include <linux/pm_runtime.h>
+#include "inv_mpu_iio.h"
+
+static unsigned int inv_scan_query_mpu6050(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ unsigned int mask;
+
+ /*
+ * If the MPU6050 is just used as a trigger, then the scan mask
+ * is not allocated so we simply enable the temperature channel
+ * as a dummy and bail out.
+ */
+ if (!indio_dev->active_scan_mask) {
+ st->chip_config.temp_fifo_enable = true;
+ return INV_MPU6050_SENSOR_TEMP;
+ }
+
+ st->chip_config.gyro_fifo_enable =
+ test_bit(INV_MPU6050_SCAN_GYRO_X,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_GYRO_Y,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_GYRO_Z,
+ indio_dev->active_scan_mask);
+
+ st->chip_config.accl_fifo_enable =
+ test_bit(INV_MPU6050_SCAN_ACCL_X,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_ACCL_Y,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_ACCL_Z,
+ indio_dev->active_scan_mask);
+
+ st->chip_config.temp_fifo_enable =
+ test_bit(INV_MPU6050_SCAN_TEMP, indio_dev->active_scan_mask);
+
+ mask = 0;
+ if (st->chip_config.gyro_fifo_enable)
+ mask |= INV_MPU6050_SENSOR_GYRO;
+ if (st->chip_config.accl_fifo_enable)
+ mask |= INV_MPU6050_SENSOR_ACCL;
+ if (st->chip_config.temp_fifo_enable)
+ mask |= INV_MPU6050_SENSOR_TEMP;
+
+ return mask;
+}
+
+static unsigned int inv_scan_query_mpu9x50(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ unsigned int mask;
+
+ mask = inv_scan_query_mpu6050(indio_dev);
+
+ /* no magnetometer if i2c auxiliary bus is used */
+ if (st->magn_disabled)
+ return mask;
+
+ st->chip_config.magn_fifo_enable =
+ test_bit(INV_MPU9X50_SCAN_MAGN_X,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU9X50_SCAN_MAGN_Y,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU9X50_SCAN_MAGN_Z,
+ indio_dev->active_scan_mask);
+ if (st->chip_config.magn_fifo_enable)
+ mask |= INV_MPU6050_SENSOR_MAGN;
+
+ return mask;
+}
+
+static unsigned int inv_scan_query(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ switch (st->chip_type) {
+ case INV_MPU9150:
+ case INV_MPU9250:
+ case INV_MPU9255:
+ return inv_scan_query_mpu9x50(indio_dev);
+ default:
+ return inv_scan_query_mpu6050(indio_dev);
+ }
+}
+
+static unsigned int inv_compute_skip_samples(const struct inv_mpu6050_state *st)
+{
+ unsigned int skip_samples = 0;
+
+ /* mag first sample is always not ready, skip it */
+ if (st->chip_config.magn_fifo_enable)
+ skip_samples = 1;
+
+ return skip_samples;
+}
+
+int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
+{
+ uint8_t d;
+ int ret;
+
+ if (enable) {
+ st->it_timestamp = 0;
+ /* reset FIFO */
+ d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
+ ret = regmap_write(st->map, st->reg->user_ctrl, d);
+ if (ret)
+ return ret;
+ /* enable sensor output to FIFO */
+ d = 0;
+ if (st->chip_config.gyro_fifo_enable)
+ d |= INV_MPU6050_BITS_GYRO_OUT;
+ if (st->chip_config.accl_fifo_enable)
+ d |= INV_MPU6050_BIT_ACCEL_OUT;
+ if (st->chip_config.temp_fifo_enable)
+ d |= INV_MPU6050_BIT_TEMP_OUT;
+ if (st->chip_config.magn_fifo_enable)
+ d |= INV_MPU6050_BIT_SLAVE_0;
+ ret = regmap_write(st->map, st->reg->fifo_en, d);
+ if (ret)
+ return ret;
+ /* enable FIFO reading */
+ d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_EN;
+ ret = regmap_write(st->map, st->reg->user_ctrl, d);
+ if (ret)
+ return ret;
+ /* enable interrupt */
+ ret = regmap_write(st->map, st->reg->int_enable,
+ INV_MPU6050_BIT_DATA_RDY_EN);
+ } else {
+ ret = regmap_write(st->map, st->reg->int_enable, 0);
+ if (ret)
+ return ret;
+ ret = regmap_write(st->map, st->reg->fifo_en, 0);
+ if (ret)
+ return ret;
+ /* restore user_ctrl for disabling FIFO reading */
+ ret = regmap_write(st->map, st->reg->user_ctrl,
+ st->chip_config.user_ctrl);
+ }
+
+ return ret;
+}
+
+/**
+ * inv_mpu6050_set_enable() - enable chip functions.
+ * @indio_dev: Device driver instance.
+ * @enable: enable/disable
+ */
+static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct device *pdev = regmap_get_device(st->map);
+ unsigned int scan;
+ int result;
+
+ if (enable) {
+ scan = inv_scan_query(indio_dev);
+ result = pm_runtime_resume_and_get(pdev);
+ if (result)
+ return result;
+ /*
+ * In case autosuspend didn't trigger, turn off first not
+ * required sensors.
+ */
+ result = inv_mpu6050_switch_engine(st, false, ~scan);
+ if (result)
+ goto error_power_off;
+ result = inv_mpu6050_switch_engine(st, true, scan);
+ if (result)
+ goto error_power_off;
+ st->skip_samples = inv_compute_skip_samples(st);
+ result = inv_mpu6050_prepare_fifo(st, true);
+ if (result)
+ goto error_power_off;
+ } else {
+ result = inv_mpu6050_prepare_fifo(st, false);
+ if (result)
+ goto error_power_off;
+ pm_runtime_mark_last_busy(pdev);
+ pm_runtime_put_autosuspend(pdev);
+ }
+
+ return 0;
+
+error_power_off:
+ pm_runtime_put_autosuspend(pdev);
+ return result;
+}
+
+/**
+ * inv_mpu_data_rdy_trigger_set_state() - set data ready interrupt state
+ * @trig: Trigger instance
+ * @state: Desired trigger state
+ */
+static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int result;
+
+ mutex_lock(&st->lock);
+ result = inv_mpu6050_set_enable(indio_dev, state);
+ mutex_unlock(&st->lock);
+
+ return result;
+}
+
+static const struct iio_trigger_ops inv_mpu_trigger_ops = {
+ .set_trigger_state = &inv_mpu_data_rdy_trigger_set_state,
+};
+
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type)
+{
+ int ret;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ st->trig = devm_iio_trigger_alloc(&indio_dev->dev,
+ "%s-dev%d",
+ indio_dev->name,
+ iio_device_id(indio_dev));
+ if (!st->trig)
+ return -ENOMEM;
+
+ ret = devm_request_irq(&indio_dev->dev, st->irq,
+ &iio_trigger_generic_data_rdy_poll,
+ irq_type,
+ "inv_mpu",
+ st->trig);
+ if (ret)
+ return ret;
+
+ st->trig->dev.parent = regmap_get_device(st->map);
+ st->trig->ops = &inv_mpu_trigger_ops;
+ iio_trigger_set_drvdata(st->trig, indio_dev);
+
+ ret = devm_iio_trigger_register(&indio_dev->dev, st->trig);
+ if (ret)
+ return ret;
+
+ indio_dev->trig = iio_trigger_get(st->trig);
+
+ return 0;
+}