diff options
Diffstat (limited to 'drivers/iio/magnetometer/Kconfig')
| -rw-r--r-- | drivers/iio/magnetometer/Kconfig | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig new file mode 100644 index 000000000..b91fc5e6a --- /dev/null +++ b/drivers/iio/magnetometer/Kconfig @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Magnetometer sensors +# +# When adding new entries keep the list in alphabetical order + +menu "Magnetometer sensors" + +config AK8974 + tristate "Asahi Kasei AK8974 3-Axis Magnetometer" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Asahi Kasei AK8974, AMI305 or + AMI306 I2C-based 3-axis magnetometer chips. + + To compile this driver as a module, choose M here: the module + will be called ak8974. + +config AK8975 + tristate "Asahi Kasei AK8975 3-Axis Magnetometer" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Asahi Kasei AK8975, AK8963, + AK09911, AK09912 or AK09916 3-Axis Magnetometer. + + To compile this driver as a module, choose M here: the module + will be called ak8975. + +config AK09911 + tristate "Asahi Kasei AK09911 3-axis Compass" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select AK8975 + help + Deprecated: AK09911 is now supported by AK8975 driver. + +config BMC150_MAGN + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config BMC150_MAGN_I2C + tristate "Bosch BMC150 I2C Magnetometer Driver" + depends on I2C + select BMC150_MAGN + select REGMAP_I2C + help + Say yes here to build support for the BMC150 magnetometer with + I2C interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing magnetometer part, which has + its own address and register map. + + This driver also supports I2C Bosch BMC156 and BMM150 chips. + To compile this driver as a module, choose M here: the module will be + called bmc150_magn_i2c. + +config BMC150_MAGN_SPI + tristate "Bosch BMC150 SPI Magnetometer Driver" + depends on SPI + select BMC150_MAGN + select REGMAP_SPI + help + Say yes here to build support for the BMC150 magnetometer with + SPI interface. + + This is a combo module with both accelerometer and magnetometer. + This driver is only implementing magnetometer part, which has + its own address and register map. + + This driver also supports SPI Bosch BMC156 and BMM150 chips. + To compile this driver as a module, choose M here: the module will be + called bmc150_magn_spi. + +config MAG3110 + tristate "Freescale MAG3110 3-Axis Magnetometer" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Freescale MAG3110 3-Axis + magnetometer. + + To compile this driver as a module, choose M here: the module + will be called mag3110. + +config HID_SENSOR_MAGNETOMETER_3D + depends on HID_SENSOR_HUB + select IIO_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID Magenetometer 3D" + help + Say yes here to build support for the HID SENSOR + Magnetometer 3D. + +config MMC35240 + tristate "MEMSIC MMC35240 3-axis magnetic sensor" + select REGMAP_I2C + depends on I2C + help + Say yes here to build support for the MEMSIC MMC35240 3-axis + magnetic sensor. + + To compile this driver as a module, choose M here: the module + will be called mmc35240. + +config IIO_ST_MAGN_3AXIS + tristate "STMicroelectronics magnetometers 3-Axis Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + help + Say yes here to build support for STMicroelectronics magnetometers: + LSM303DLHC, LSM303DLM, LIS3MDL. + + Also need to enable at least one of I2C and SPI interface drivers + below. + +config IIO_ST_MAGN_I2C_3AXIS + tristate "STMicroelectronics magnetometers 3-Axis I2C Interface" + depends on I2C && IIO_ST_MAGN_3AXIS + default I2C && IIO_ST_MAGN_3AXIS + select IIO_ST_SENSORS_I2C + help + Build support for STMicroelectronics magnetometers I2C interface. + + To compile this driver as a module, choose M here. The module + will be called st_magn_i2c. + +config IIO_ST_MAGN_SPI_3AXIS + tristate "STMicroelectronics magnetometers 3-Axis SPI Interface" + depends on SPI_MASTER && IIO_ST_MAGN_3AXIS + default SPI_MASTER && IIO_ST_MAGN_3AXIS + select IIO_ST_SENSORS_SPI + help + Build support for STMicroelectronics magnetometers SPI interface. + + To compile this driver as a module, choose M here. The module + will be called st_magn_spi. + +config SENSORS_HMC5843 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SENSORS_HMC5843_I2C + tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" + depends on I2C + select SENSORS_HMC5843 + select REGMAP_I2C + help + Say Y here to add support for the Honeywell HMC5843, HMC5883 and + HMC5883L 3-Axis Magnetometer (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) + +config SENSORS_HMC5843_SPI + tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" + depends on SPI_MASTER + select SENSORS_HMC5843 + select REGMAP_SPI + help + Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer + (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_spi (support for HMC5983) + +config SENSORS_RM3100 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SENSORS_RM3100_I2C + tristate "PNI RM3100 3-Axis Magnetometer (I2C)" + depends on I2C + select SENSORS_RM3100 + select REGMAP_I2C + help + Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called rm3100-i2c. + +config SENSORS_RM3100_SPI + tristate "PNI RM3100 3-Axis Magnetometer (SPI)" + depends on SPI_MASTER + select SENSORS_RM3100 + select REGMAP_SPI + help + Say Y here to add support for the PNI RM3100 3-Axis Magnetometer. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called rm3100-spi. + +config YAMAHA_YAS530 + tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to add support for the Yamaha YAS530 series of + 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are + supported. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called yamaha-yas. + +endmenu |