summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/qib/qib.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/infiniband/hw/qib/qib.h1493
1 files changed, 1493 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
new file mode 100644
index 000000000..26c615772
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -0,0 +1,1493 @@
+#ifndef _QIB_KERNEL_H
+#define _QIB_KERNEL_H
+/*
+ * Copyright (c) 2012 - 2017 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This header file is the base header file for qlogic_ib kernel code
+ * qib_user.h serves a similar purpose for user code.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/fs.h>
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/xarray.h>
+#include <rdma/ib_hdrs.h>
+#include <rdma/rdma_vt.h>
+
+#include "qib_common.h"
+#include "qib_verbs.h"
+
+/* only s/w major version of QLogic_IB we can handle */
+#define QIB_CHIP_VERS_MAJ 2U
+
+/* don't care about this except printing */
+#define QIB_CHIP_VERS_MIN 0U
+
+/* The Organization Unique Identifier (Mfg code), and its position in GUID */
+#define QIB_OUI 0x001175
+#define QIB_OUI_LSB 40
+
+/*
+ * per driver stats, either not device nor port-specific, or
+ * summed over all of the devices and ports.
+ * They are described by name via ipathfs filesystem, so layout
+ * and number of elements can change without breaking compatibility.
+ * If members are added or deleted qib_statnames[] in qib_fs.c must
+ * change to match.
+ */
+struct qlogic_ib_stats {
+ __u64 sps_ints; /* number of interrupts handled */
+ __u64 sps_errints; /* number of error interrupts */
+ __u64 sps_txerrs; /* tx-related packet errors */
+ __u64 sps_rcverrs; /* non-crc rcv packet errors */
+ __u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */
+ __u64 sps_nopiobufs; /* no pio bufs avail from kernel */
+ __u64 sps_ctxts; /* number of contexts currently open */
+ __u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */
+ __u64 sps_buffull;
+ __u64 sps_hdrfull;
+};
+
+extern struct qlogic_ib_stats qib_stats;
+extern const struct pci_error_handlers qib_pci_err_handler;
+
+#define QIB_CHIP_SWVERSION QIB_CHIP_VERS_MAJ
+/*
+ * First-cut critierion for "device is active" is
+ * two thousand dwords combined Tx, Rx traffic per
+ * 5-second interval. SMA packets are 64 dwords,
+ * and occur "a few per second", presumably each way.
+ */
+#define QIB_TRAFFIC_ACTIVE_THRESHOLD (2000)
+
+/*
+ * Below contains all data related to a single context (formerly called port).
+ */
+
+#ifdef CONFIG_DEBUG_FS
+struct qib_opcode_stats_perctx;
+#endif
+
+struct qib_ctxtdata {
+ void **rcvegrbuf;
+ dma_addr_t *rcvegrbuf_phys;
+ /* rcvhdrq base, needs mmap before useful */
+ void *rcvhdrq;
+ /* kernel virtual address where hdrqtail is updated */
+ void *rcvhdrtail_kvaddr;
+ /*
+ * temp buffer for expected send setup, allocated at open, instead
+ * of each setup call
+ */
+ void *tid_pg_list;
+ /*
+ * Shared page for kernel to signal user processes that send buffers
+ * need disarming. The process should call QIB_CMD_DISARM_BUFS
+ * or QIB_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set.
+ */
+ unsigned long *user_event_mask;
+ /* when waiting for rcv or pioavail */
+ wait_queue_head_t wait;
+ /*
+ * rcvegr bufs base, physical, must fit
+ * in 44 bits so 32 bit programs mmap64 44 bit works)
+ */
+ dma_addr_t rcvegr_phys;
+ /* mmap of hdrq, must fit in 44 bits */
+ dma_addr_t rcvhdrq_phys;
+ dma_addr_t rcvhdrqtailaddr_phys;
+
+ /*
+ * number of opens (including slave sub-contexts) on this instance
+ * (ignoring forks, dup, etc. for now)
+ */
+ int cnt;
+ /*
+ * how much space to leave at start of eager TID entries for
+ * protocol use, on each TID
+ */
+ /* instead of calculating it */
+ unsigned ctxt;
+ /* local node of context */
+ int node_id;
+ /* non-zero if ctxt is being shared. */
+ u16 subctxt_cnt;
+ /* non-zero if ctxt is being shared. */
+ u16 subctxt_id;
+ /* number of eager TID entries. */
+ u16 rcvegrcnt;
+ /* index of first eager TID entry. */
+ u16 rcvegr_tid_base;
+ /* number of pio bufs for this ctxt (all procs, if shared) */
+ u32 piocnt;
+ /* first pio buffer for this ctxt */
+ u32 pio_base;
+ /* chip offset of PIO buffers for this ctxt */
+ u32 piobufs;
+ /* how many alloc_pages() chunks in rcvegrbuf_pages */
+ u32 rcvegrbuf_chunks;
+ /* how many egrbufs per chunk */
+ u16 rcvegrbufs_perchunk;
+ /* ilog2 of above */
+ u16 rcvegrbufs_perchunk_shift;
+ /* order for rcvegrbuf_pages */
+ size_t rcvegrbuf_size;
+ /* rcvhdrq size (for freeing) */
+ size_t rcvhdrq_size;
+ /* per-context flags for fileops/intr communication */
+ unsigned long flag;
+ /* next expected TID to check when looking for free */
+ u32 tidcursor;
+ /* WAIT_RCV that timed out, no interrupt */
+ u32 rcvwait_to;
+ /* WAIT_PIO that timed out, no interrupt */
+ u32 piowait_to;
+ /* WAIT_RCV already happened, no wait */
+ u32 rcvnowait;
+ /* WAIT_PIO already happened, no wait */
+ u32 pionowait;
+ /* total number of polled urgent packets */
+ u32 urgent;
+ /* saved total number of polled urgent packets for poll edge trigger */
+ u32 urgent_poll;
+ /* pid of process using this ctxt */
+ pid_t pid;
+ pid_t subpid[QLOGIC_IB_MAX_SUBCTXT];
+ /* same size as task_struct .comm[], command that opened context */
+ char comm[TASK_COMM_LEN];
+ /* pkeys set by this use of this ctxt */
+ u16 pkeys[4];
+ /* so file ops can get at unit */
+ struct qib_devdata *dd;
+ /* so funcs that need physical port can get it easily */
+ struct qib_pportdata *ppd;
+ /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
+ void *subctxt_uregbase;
+ /* An array of pages for the eager receive buffers * N */
+ void *subctxt_rcvegrbuf;
+ /* An array of pages for the eager header queue entries * N */
+ void *subctxt_rcvhdr_base;
+ /* The version of the library which opened this ctxt */
+ u32 userversion;
+ /* Bitmask of active slaves */
+ u32 active_slaves;
+ /* Type of packets or conditions we want to poll for */
+ u16 poll_type;
+ /* receive packet sequence counter */
+ u8 seq_cnt;
+ u8 redirect_seq_cnt;
+ /* ctxt rcvhdrq head offset */
+ u32 head;
+ /* QPs waiting for context processing */
+ struct list_head qp_wait_list;
+#ifdef CONFIG_DEBUG_FS
+ /* verbs stats per CTX */
+ struct qib_opcode_stats_perctx *opstats;
+#endif
+};
+
+struct rvt_sge_state;
+
+struct qib_sdma_txreq {
+ int flags;
+ int sg_count;
+ dma_addr_t addr;
+ void (*callback)(struct qib_sdma_txreq *, int);
+ u16 start_idx; /* sdma private */
+ u16 next_descq_idx; /* sdma private */
+ struct list_head list; /* sdma private */
+};
+
+struct qib_sdma_desc {
+ __le64 qw[2];
+};
+
+struct qib_verbs_txreq {
+ struct qib_sdma_txreq txreq;
+ struct rvt_qp *qp;
+ struct rvt_swqe *wqe;
+ u32 dwords;
+ u16 hdr_dwords;
+ u16 hdr_inx;
+ struct qib_pio_header *align_buf;
+ struct rvt_mregion *mr;
+ struct rvt_sge_state *ss;
+};
+
+#define QIB_SDMA_TXREQ_F_USELARGEBUF 0x1
+#define QIB_SDMA_TXREQ_F_HEADTOHOST 0x2
+#define QIB_SDMA_TXREQ_F_INTREQ 0x4
+#define QIB_SDMA_TXREQ_F_FREEBUF 0x8
+#define QIB_SDMA_TXREQ_F_FREEDESC 0x10
+
+#define QIB_SDMA_TXREQ_S_OK 0
+#define QIB_SDMA_TXREQ_S_SENDERROR 1
+#define QIB_SDMA_TXREQ_S_ABORTED 2
+#define QIB_SDMA_TXREQ_S_SHUTDOWN 3
+
+/*
+ * Get/Set IB link-level config parameters for f_get/set_ib_cfg()
+ * Mostly for MADs that set or query link parameters, also ipath
+ * config interfaces
+ */
+#define QIB_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */
+#define QIB_IB_CFG_LWID_ENB 2 /* allowed Link-width */
+#define QIB_IB_CFG_LWID 3 /* currently active Link-width */
+#define QIB_IB_CFG_SPD_ENB 4 /* allowed Link speeds */
+#define QIB_IB_CFG_SPD 5 /* current Link spd */
+#define QIB_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */
+#define QIB_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */
+#define QIB_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */
+#define QIB_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */
+#define QIB_IB_CFG_OP_VLS 10 /* operational VLs */
+#define QIB_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */
+#define QIB_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */
+#define QIB_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */
+#define QIB_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */
+#define QIB_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */
+#define QIB_IB_CFG_PKEYS 16 /* update partition keys */
+#define QIB_IB_CFG_MTU 17 /* update MTU in IBC */
+#define QIB_IB_CFG_LSTATE 18 /* update linkcmd and linkinitcmd in IBC */
+#define QIB_IB_CFG_VL_HIGH_LIMIT 19
+#define QIB_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */
+#define QIB_IB_CFG_PORT 21 /* switch port we are connected to */
+
+/*
+ * for CFG_LSTATE: LINKCMD in upper 16 bits, LINKINITCMD in lower 16
+ * IB_LINKINITCMD_POLL and SLEEP are also used as set/get values for
+ * QIB_IB_CFG_LINKDEFAULT cmd
+ */
+#define IB_LINKCMD_DOWN (0 << 16)
+#define IB_LINKCMD_ARMED (1 << 16)
+#define IB_LINKCMD_ACTIVE (2 << 16)
+#define IB_LINKINITCMD_NOP 0
+#define IB_LINKINITCMD_POLL 1
+#define IB_LINKINITCMD_SLEEP 2
+#define IB_LINKINITCMD_DISABLE 3
+
+/*
+ * valid states passed to qib_set_linkstate() user call
+ */
+#define QIB_IB_LINKDOWN 0
+#define QIB_IB_LINKARM 1
+#define QIB_IB_LINKACTIVE 2
+#define QIB_IB_LINKDOWN_ONLY 3
+#define QIB_IB_LINKDOWN_SLEEP 4
+#define QIB_IB_LINKDOWN_DISABLE 5
+
+/*
+ * These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
+ * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
+ * with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
+ * are also the possible values for qib_link_speed_enabled and active
+ * The values were chosen to match values used within the IB spec.
+ */
+#define QIB_IB_SDR 1
+#define QIB_IB_DDR 2
+#define QIB_IB_QDR 4
+
+#define QIB_DEFAULT_MTU 4096
+
+/* max number of IB ports supported per HCA */
+#define QIB_MAX_IB_PORTS 2
+
+/*
+ * Possible IB config parameters for f_get/set_ib_table()
+ */
+#define QIB_IB_TBL_VL_HIGH_ARB 1 /* Get/set VL high priority weights */
+#define QIB_IB_TBL_VL_LOW_ARB 2 /* Get/set VL low priority weights */
+
+/*
+ * Possible "operations" for f_rcvctrl(ppd, op, ctxt)
+ * these are bits so they can be combined, e.g.
+ * QIB_RCVCTRL_INTRAVAIL_ENB | QIB_RCVCTRL_CTXT_ENB
+ */
+#define QIB_RCVCTRL_TAILUPD_ENB 0x01
+#define QIB_RCVCTRL_TAILUPD_DIS 0x02
+#define QIB_RCVCTRL_CTXT_ENB 0x04
+#define QIB_RCVCTRL_CTXT_DIS 0x08
+#define QIB_RCVCTRL_INTRAVAIL_ENB 0x10
+#define QIB_RCVCTRL_INTRAVAIL_DIS 0x20
+#define QIB_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */
+#define QIB_RCVCTRL_PKEY_DIS 0x80
+#define QIB_RCVCTRL_BP_ENB 0x0100
+#define QIB_RCVCTRL_BP_DIS 0x0200
+#define QIB_RCVCTRL_TIDFLOW_ENB 0x0400
+#define QIB_RCVCTRL_TIDFLOW_DIS 0x0800
+
+/*
+ * Possible "operations" for f_sendctrl(ppd, op, var)
+ * these are bits so they can be combined, e.g.
+ * QIB_SENDCTRL_BUFAVAIL_ENB | QIB_SENDCTRL_ENB
+ * Some operations (e.g. DISARM, ABORT) are known to
+ * be "one-shot", so do not modify shadow.
+ */
+#define QIB_SENDCTRL_DISARM (0x1000)
+#define QIB_SENDCTRL_DISARM_BUF(bufn) ((bufn) | QIB_SENDCTRL_DISARM)
+ /* available (0x2000) */
+#define QIB_SENDCTRL_AVAIL_DIS (0x4000)
+#define QIB_SENDCTRL_AVAIL_ENB (0x8000)
+#define QIB_SENDCTRL_AVAIL_BLIP (0x10000)
+#define QIB_SENDCTRL_SEND_DIS (0x20000)
+#define QIB_SENDCTRL_SEND_ENB (0x40000)
+#define QIB_SENDCTRL_FLUSH (0x80000)
+#define QIB_SENDCTRL_CLEAR (0x100000)
+#define QIB_SENDCTRL_DISARM_ALL (0x200000)
+
+/*
+ * These are the generic indices for requesting per-port
+ * counter values via the f_portcntr function. They
+ * are always returned as 64 bit values, although most
+ * are 32 bit counters.
+ */
+/* send-related counters */
+#define QIBPORTCNTR_PKTSEND 0U
+#define QIBPORTCNTR_WORDSEND 1U
+#define QIBPORTCNTR_PSXMITDATA 2U
+#define QIBPORTCNTR_PSXMITPKTS 3U
+#define QIBPORTCNTR_PSXMITWAIT 4U
+#define QIBPORTCNTR_SENDSTALL 5U
+/* receive-related counters */
+#define QIBPORTCNTR_PKTRCV 6U
+#define QIBPORTCNTR_PSRCVDATA 7U
+#define QIBPORTCNTR_PSRCVPKTS 8U
+#define QIBPORTCNTR_RCVEBP 9U
+#define QIBPORTCNTR_RCVOVFL 10U
+#define QIBPORTCNTR_WORDRCV 11U
+/* IB link related error counters */
+#define QIBPORTCNTR_RXLOCALPHYERR 12U
+#define QIBPORTCNTR_RXVLERR 13U
+#define QIBPORTCNTR_ERRICRC 14U
+#define QIBPORTCNTR_ERRVCRC 15U
+#define QIBPORTCNTR_ERRLPCRC 16U
+#define QIBPORTCNTR_BADFORMAT 17U
+#define QIBPORTCNTR_ERR_RLEN 18U
+#define QIBPORTCNTR_IBSYMBOLERR 19U
+#define QIBPORTCNTR_INVALIDRLEN 20U
+#define QIBPORTCNTR_UNSUPVL 21U
+#define QIBPORTCNTR_EXCESSBUFOVFL 22U
+#define QIBPORTCNTR_ERRLINK 23U
+#define QIBPORTCNTR_IBLINKDOWN 24U
+#define QIBPORTCNTR_IBLINKERRRECOV 25U
+#define QIBPORTCNTR_LLI 26U
+/* other error counters */
+#define QIBPORTCNTR_RXDROPPKT 27U
+#define QIBPORTCNTR_VL15PKTDROP 28U
+#define QIBPORTCNTR_ERRPKEY 29U
+#define QIBPORTCNTR_KHDROVFL 30U
+/* sampling counters (these are actually control registers) */
+#define QIBPORTCNTR_PSINTERVAL 31U
+#define QIBPORTCNTR_PSSTART 32U
+#define QIBPORTCNTR_PSSTAT 33U
+
+/* how often we check for packet activity for "power on hours (in seconds) */
+#define ACTIVITY_TIMER 5
+
+#define MAX_NAME_SIZE 64
+
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+struct qib_irq_notify;
+#endif
+
+struct qib_msix_entry {
+ void *arg;
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+ int dca;
+ int rcv;
+ struct qib_irq_notify *notifier;
+#endif
+ cpumask_var_t mask;
+};
+
+/* Below is an opaque struct. Each chip (device) can maintain
+ * private data needed for its operation, but not germane to the
+ * rest of the driver. For convenience, we define another that
+ * is chip-specific, per-port
+ */
+struct qib_chip_specific;
+struct qib_chipport_specific;
+
+enum qib_sdma_states {
+ qib_sdma_state_s00_hw_down,
+ qib_sdma_state_s10_hw_start_up_wait,
+ qib_sdma_state_s20_idle,
+ qib_sdma_state_s30_sw_clean_up_wait,
+ qib_sdma_state_s40_hw_clean_up_wait,
+ qib_sdma_state_s50_hw_halt_wait,
+ qib_sdma_state_s99_running,
+};
+
+enum qib_sdma_events {
+ qib_sdma_event_e00_go_hw_down,
+ qib_sdma_event_e10_go_hw_start,
+ qib_sdma_event_e20_hw_started,
+ qib_sdma_event_e30_go_running,
+ qib_sdma_event_e40_sw_cleaned,
+ qib_sdma_event_e50_hw_cleaned,
+ qib_sdma_event_e60_hw_halted,
+ qib_sdma_event_e70_go_idle,
+ qib_sdma_event_e7220_err_halted,
+ qib_sdma_event_e7322_err_halted,
+ qib_sdma_event_e90_timer_tick,
+};
+
+struct sdma_set_state_action {
+ unsigned op_enable:1;
+ unsigned op_intenable:1;
+ unsigned op_halt:1;
+ unsigned op_drain:1;
+ unsigned go_s99_running_tofalse:1;
+ unsigned go_s99_running_totrue:1;
+};
+
+struct qib_sdma_state {
+ struct kref kref;
+ struct completion comp;
+ enum qib_sdma_states current_state;
+ struct sdma_set_state_action *set_state_action;
+ unsigned current_op;
+ unsigned go_s99_running;
+ unsigned first_sendbuf;
+ unsigned last_sendbuf; /* really last +1 */
+ /* debugging/devel */
+ enum qib_sdma_states previous_state;
+ unsigned previous_op;
+ enum qib_sdma_events last_event;
+};
+
+struct xmit_wait {
+ struct timer_list timer;
+ u64 counter;
+ u8 flags;
+ struct cache {
+ u64 psxmitdata;
+ u64 psrcvdata;
+ u64 psxmitpkts;
+ u64 psrcvpkts;
+ u64 psxmitwait;
+ } counter_cache;
+};
+
+/*
+ * The structure below encapsulates data relevant to a physical IB Port.
+ * Current chips support only one such port, but the separation
+ * clarifies things a bit. Note that to conform to IB conventions,
+ * port-numbers are one-based. The first or only port is port1.
+ */
+struct qib_pportdata {
+ struct qib_ibport ibport_data;
+
+ struct qib_devdata *dd;
+ struct qib_chippport_specific *cpspec; /* chip-specific per-port */
+
+ /* GUID for this interface, in network order */
+ __be64 guid;
+
+ /* QIB_POLL, etc. link-state specific flags, per port */
+ u32 lflags;
+ /* qib_lflags driver is waiting for */
+ u32 state_wanted;
+ spinlock_t lflags_lock;
+
+ /* ref count for each pkey */
+ atomic_t pkeyrefs[4];
+
+ /*
+ * this address is mapped readonly into user processes so they can
+ * get status cheaply, whenever they want. One qword of status per port
+ */
+ u64 *statusp;
+
+ /* SendDMA related entries */
+
+ /* read mostly */
+ struct qib_sdma_desc *sdma_descq;
+ struct workqueue_struct *qib_wq;
+ struct qib_sdma_state sdma_state;
+ dma_addr_t sdma_descq_phys;
+ volatile __le64 *sdma_head_dma; /* DMA'ed by chip */
+ dma_addr_t sdma_head_phys;
+ u16 sdma_descq_cnt;
+
+ /* read/write using lock */
+ spinlock_t sdma_lock ____cacheline_aligned_in_smp;
+ struct list_head sdma_activelist;
+ struct list_head sdma_userpending;
+ u64 sdma_descq_added;
+ u64 sdma_descq_removed;
+ u16 sdma_descq_tail;
+ u16 sdma_descq_head;
+ u8 sdma_generation;
+ u8 sdma_intrequest;
+
+ struct tasklet_struct sdma_sw_clean_up_task
+ ____cacheline_aligned_in_smp;
+
+ wait_queue_head_t state_wait; /* for state_wanted */
+
+ /* HoL blocking for SMP replies */
+ unsigned hol_state;
+ struct timer_list hol_timer;
+
+ /*
+ * Shadow copies of registers; size indicates read access size.
+ * Most of them are readonly, but some are write-only register,
+ * where we manipulate the bits in the shadow copy, and then write
+ * the shadow copy to qlogic_ib.
+ *
+ * We deliberately make most of these 32 bits, since they have
+ * restricted range. For any that we read, we won't to generate 32
+ * bit accesses, since Opteron will generate 2 separate 32 bit HT
+ * transactions for a 64 bit read, and we want to avoid unnecessary
+ * bus transactions.
+ */
+
+ /* This is the 64 bit group */
+ /* last ibcstatus. opaque outside chip-specific code */
+ u64 lastibcstat;
+
+ /* these are the "32 bit" regs */
+
+ /*
+ * the following two are 32-bit bitmasks, but {test,clear,set}_bit
+ * all expect bit fields to be "unsigned long"
+ */
+ unsigned long p_rcvctrl; /* shadow per-port rcvctrl */
+ unsigned long p_sendctrl; /* shadow per-port sendctrl */
+
+ u32 ibmtu; /* The MTU programmed for this unit */
+ /*
+ * Current max size IB packet (in bytes) including IB headers, that
+ * we can send. Changes when ibmtu changes.
+ */
+ u32 ibmaxlen;
+ /*
+ * ibmaxlen at init time, limited by chip and by receive buffer
+ * size. Not changed after init.
+ */
+ u32 init_ibmaxlen;
+ /* LID programmed for this instance */
+ u16 lid;
+ /* list of pkeys programmed; 0 if not set */
+ u16 pkeys[4];
+ /* LID mask control */
+ u8 lmc;
+ u8 link_width_supported;
+ u16 link_speed_supported;
+ u8 link_width_enabled;
+ u16 link_speed_enabled;
+ u8 link_width_active;
+ u16 link_speed_active;
+ u8 vls_supported;
+ u8 vls_operational;
+ /* Rx Polarity inversion (compensate for ~tx on partner) */
+ u8 rx_pol_inv;
+
+ u8 hw_pidx; /* physical port index */
+ u32 port; /* IB port number and index into dd->pports - 1 */
+
+ u8 delay_mult;
+
+ /* used to override LED behavior */
+ u8 led_override; /* Substituted for normal value, if non-zero */
+ u16 led_override_timeoff; /* delta to next timer event */
+ u8 led_override_vals[2]; /* Alternates per blink-frame */
+ u8 led_override_phase; /* Just counts, LSB picks from vals[] */
+ atomic_t led_override_timer_active;
+ /* Used to flash LEDs in override mode */
+ struct timer_list led_override_timer;
+ struct xmit_wait cong_stats;
+ struct timer_list symerr_clear_timer;
+
+ /* Synchronize access between driver writes and sysfs reads */
+ spinlock_t cc_shadow_lock
+ ____cacheline_aligned_in_smp;
+
+ /* Shadow copy of the congestion control table */
+ struct cc_table_shadow *ccti_entries_shadow;
+
+ /* Shadow copy of the congestion control entries */
+ struct ib_cc_congestion_setting_attr_shadow *congestion_entries_shadow;
+
+ /* List of congestion control table entries */
+ struct ib_cc_table_entry_shadow *ccti_entries;
+
+ /* 16 congestion entries with each entry corresponding to a SL */
+ struct ib_cc_congestion_entry_shadow *congestion_entries;
+
+ /* Maximum number of congestion control entries that the agent expects
+ * the manager to send.
+ */
+ u16 cc_supported_table_entries;
+
+ /* Total number of congestion control table entries */
+ u16 total_cct_entry;
+
+ /* Bit map identifying service level */
+ u16 cc_sl_control_map;
+
+ /* maximum congestion control table index */
+ u16 ccti_limit;
+
+ /* CA's max number of 64 entry units in the congestion control table */
+ u8 cc_max_table_entries;
+};
+
+/* Observers. Not to be taken lightly, possibly not to ship. */
+/*
+ * If a diag read or write is to (bottom <= offset <= top),
+ * the "hook" is called, allowing, e.g. shadows to be
+ * updated in sync with the driver. struct diag_observer
+ * is the "visible" part.
+ */
+struct diag_observer;
+
+typedef int (*diag_hook) (struct qib_devdata *dd,
+ const struct diag_observer *op,
+ u32 offs, u64 *data, u64 mask, int only_32);
+
+struct diag_observer {
+ diag_hook hook;
+ u32 bottom;
+ u32 top;
+};
+
+extern int qib_register_observer(struct qib_devdata *dd,
+ const struct diag_observer *op);
+
+/* Only declared here, not defined. Private to diags */
+struct diag_observer_list_elt;
+
+/* device data struct now contains only "general per-device" info.
+ * fields related to a physical IB port are in a qib_pportdata struct,
+ * described above) while fields only used by a particular chip-type are in
+ * a qib_chipdata struct, whose contents are opaque to this file.
+ */
+struct qib_devdata {
+ struct qib_ibdev verbs_dev; /* must be first */
+ struct list_head list;
+ /* pointers to related structs for this device */
+ /* pci access data structure */
+ struct pci_dev *pcidev;
+ struct cdev *user_cdev;
+ struct cdev *diag_cdev;
+ struct device *user_device;
+ struct device *diag_device;
+
+ /* mem-mapped pointer to base of chip regs */
+ u64 __iomem *kregbase;
+ /* end of mem-mapped chip space excluding sendbuf and user regs */
+ u64 __iomem *kregend;
+ /* physical address of chip for io_remap, etc. */
+ resource_size_t physaddr;
+ /* qib_cfgctxts pointers */
+ struct qib_ctxtdata **rcd; /* Receive Context Data */
+
+ /* qib_pportdata, points to array of (physical) port-specific
+ * data structs, indexed by pidx (0..n-1)
+ */
+ struct qib_pportdata *pport;
+ struct qib_chip_specific *cspec; /* chip-specific */
+
+ /* kvirt address of 1st 2k pio buffer */
+ void __iomem *pio2kbase;
+ /* kvirt address of 1st 4k pio buffer */
+ void __iomem *pio4kbase;
+ /* mem-mapped pointer to base of PIO buffers (if using WC PAT) */
+ void __iomem *piobase;
+ /* mem-mapped pointer to base of user chip regs (if using WC PAT) */
+ u64 __iomem *userbase;
+ void __iomem *piovl15base; /* base of VL15 buffers, if not WC */
+ /*
+ * points to area where PIOavail registers will be DMA'ed.
+ * Has to be on a page of it's own, because the page will be
+ * mapped into user program space. This copy is *ONLY* ever
+ * written by DMA, not by the driver! Need a copy per device
+ * when we get to multiple devices
+ */
+ volatile __le64 *pioavailregs_dma; /* DMA'ed by chip */
+ /* physical address where updates occur */
+ dma_addr_t pioavailregs_phys;
+
+ /* device-specific implementations of functions needed by
+ * common code. Contrary to previous consensus, we can't
+ * really just point to a device-specific table, because we
+ * may need to "bend", e.g. *_f_put_tid
+ */
+ /* fallback to alternate interrupt type if possible */
+ int (*f_intr_fallback)(struct qib_devdata *);
+ /* hard reset chip */
+ int (*f_reset)(struct qib_devdata *);
+ void (*f_quiet_serdes)(struct qib_pportdata *);
+ int (*f_bringup_serdes)(struct qib_pportdata *);
+ int (*f_early_init)(struct qib_devdata *);
+ void (*f_clear_tids)(struct qib_devdata *, struct qib_ctxtdata *);
+ void (*f_put_tid)(struct qib_devdata *, u64 __iomem*,
+ u32, unsigned long);
+ void (*f_cleanup)(struct qib_devdata *);
+ void (*f_setextled)(struct qib_pportdata *, u32);
+ /* fill out chip-specific fields */
+ int (*f_get_base_info)(struct qib_ctxtdata *, struct qib_base_info *);
+ /* free irq */
+ void (*f_free_irq)(struct qib_devdata *);
+ struct qib_message_header *(*f_get_msgheader)
+ (struct qib_devdata *, __le32 *);
+ void (*f_config_ctxts)(struct qib_devdata *);
+ int (*f_get_ib_cfg)(struct qib_pportdata *, int);
+ int (*f_set_ib_cfg)(struct qib_pportdata *, int, u32);
+ int (*f_set_ib_loopback)(struct qib_pportdata *, const char *);
+ int (*f_get_ib_table)(struct qib_pportdata *, int, void *);
+ int (*f_set_ib_table)(struct qib_pportdata *, int, void *);
+ u32 (*f_iblink_state)(u64);
+ u8 (*f_ibphys_portstate)(u64);
+ void (*f_xgxs_reset)(struct qib_pportdata *);
+ /* per chip actions needed for IB Link up/down changes */
+ int (*f_ib_updown)(struct qib_pportdata *, int, u64);
+ u32 __iomem *(*f_getsendbuf)(struct qib_pportdata *, u64, u32 *);
+ /* Read/modify/write of GPIO pins (potentially chip-specific */
+ int (*f_gpio_mod)(struct qib_devdata *dd, u32 out, u32 dir,
+ u32 mask);
+ /* Enable writes to config EEPROM (if supported) */
+ int (*f_eeprom_wen)(struct qib_devdata *dd, int wen);
+ /*
+ * modify rcvctrl shadow[s] and write to appropriate chip-regs.
+ * see above QIB_RCVCTRL_xxx_ENB/DIS for operations.
+ * (ctxt == -1) means "all contexts", only meaningful for
+ * clearing. Could remove if chip_spec shutdown properly done.
+ */
+ void (*f_rcvctrl)(struct qib_pportdata *, unsigned int op,
+ int ctxt);
+ /* Read/modify/write sendctrl appropriately for op and port. */
+ void (*f_sendctrl)(struct qib_pportdata *, u32 op);
+ void (*f_set_intr_state)(struct qib_devdata *, u32);
+ void (*f_set_armlaunch)(struct qib_devdata *, u32);
+ void (*f_wantpiobuf_intr)(struct qib_devdata *, u32);
+ int (*f_late_initreg)(struct qib_devdata *);
+ int (*f_init_sdma_regs)(struct qib_pportdata *);
+ u16 (*f_sdma_gethead)(struct qib_pportdata *);
+ int (*f_sdma_busy)(struct qib_pportdata *);
+ void (*f_sdma_update_tail)(struct qib_pportdata *, u16);
+ void (*f_sdma_set_desc_cnt)(struct qib_pportdata *, unsigned);
+ void (*f_sdma_sendctrl)(struct qib_pportdata *, unsigned);
+ void (*f_sdma_hw_clean_up)(struct qib_pportdata *);
+ void (*f_sdma_hw_start_up)(struct qib_pportdata *);
+ void (*f_sdma_init_early)(struct qib_pportdata *);
+ void (*f_set_cntr_sample)(struct qib_pportdata *, u32, u32);
+ void (*f_update_usrhead)(struct qib_ctxtdata *, u64, u32, u32, u32);
+ u32 (*f_hdrqempty)(struct qib_ctxtdata *);
+ u64 (*f_portcntr)(struct qib_pportdata *, u32);
+ u32 (*f_read_cntrs)(struct qib_devdata *, loff_t, char **,
+ u64 **);
+ u32 (*f_read_portcntrs)(struct qib_devdata *, loff_t, u32,
+ char **, u64 **);
+ u32 (*f_setpbc_control)(struct qib_pportdata *, u32, u8, u8);
+ void (*f_initvl15_bufs)(struct qib_devdata *);
+ void (*f_init_ctxt)(struct qib_ctxtdata *);
+ void (*f_txchk_change)(struct qib_devdata *, u32, u32, u32,
+ struct qib_ctxtdata *);
+ void (*f_writescratch)(struct qib_devdata *, u32);
+ int (*f_tempsense_rd)(struct qib_devdata *, int regnum);
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+ int (*f_notify_dca)(struct qib_devdata *, unsigned long event);
+#endif
+
+ char *boardname; /* human readable board info */
+
+ /* template for writing TIDs */
+ u64 tidtemplate;
+ /* value to write to free TIDs */
+ u64 tidinvalid;
+
+ /* number of registers used for pioavail */
+ u32 pioavregs;
+ /* device (not port) flags, basically device capabilities */
+ u32 flags;
+ /* last buffer for user use */
+ u32 lastctxt_piobuf;
+
+ /* reset value */
+ u64 z_int_counter;
+ /* percpu intcounter */
+ u64 __percpu *int_counter;
+
+ /* pio bufs allocated per ctxt */
+ u32 pbufsctxt;
+ /* if remainder on bufs/ctxt, ctxts < extrabuf get 1 extra */
+ u32 ctxts_extrabuf;
+ /*
+ * number of ctxts configured as max; zero is set to number chip
+ * supports, less gives more pio bufs/ctxt, etc.
+ */
+ u32 cfgctxts;
+ /*
+ * number of ctxts available for PSM open
+ */
+ u32 freectxts;
+
+ /*
+ * hint that we should update pioavailshadow before
+ * looking for a PIO buffer
+ */
+ u32 upd_pio_shadow;
+
+ /* internal debugging stats */
+ u32 maxpkts_call;
+ u32 avgpkts_call;
+ u64 nopiobufs;
+
+ /* PCI Vendor ID (here for NodeInfo) */
+ u16 vendorid;
+ /* PCI Device ID (here for NodeInfo) */
+ u16 deviceid;
+ /* for write combining settings */
+ int wc_cookie;
+ unsigned long wc_base;
+ unsigned long wc_len;
+
+ /* shadow copy of struct page *'s for exp tid pages */
+ struct page **pageshadow;
+ /* shadow copy of dma handles for exp tid pages */
+ dma_addr_t *physshadow;
+ u64 __iomem *egrtidbase;
+ spinlock_t sendctrl_lock; /* protect changes to sendctrl shadow */
+ /* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */
+ spinlock_t uctxt_lock; /* rcd and user context changes */
+ /*
+ * per unit status, see also portdata statusp
+ * mapped readonly into user processes so they can get unit and
+ * IB link status cheaply
+ */
+ u64 *devstatusp;
+ char *freezemsg; /* freeze msg if hw error put chip in freeze */
+ u32 freezelen; /* max length of freezemsg */
+ /* timer used to prevent stats overflow, error throttling, etc. */
+ struct timer_list stats_timer;
+
+ /* timer to verify interrupts work, and fallback if possible */
+ struct timer_list intrchk_timer;
+ unsigned long ureg_align; /* user register alignment */
+
+ /*
+ * Protects pioavailshadow, pioavailkernel, pio_need_disarm, and
+ * pio_writing.
+ */
+ spinlock_t pioavail_lock;
+ /*
+ * index of last buffer to optimize search for next
+ */
+ u32 last_pio;
+ /*
+ * min kernel pio buffer to optimize search
+ */
+ u32 min_kernel_pio;
+ /*
+ * Shadow copies of registers; size indicates read access size.
+ * Most of them are readonly, but some are write-only register,
+ * where we manipulate the bits in the shadow copy, and then write
+ * the shadow copy to qlogic_ib.
+ *
+ * We deliberately make most of these 32 bits, since they have
+ * restricted range. For any that we read, we won't to generate 32
+ * bit accesses, since Opteron will generate 2 separate 32 bit HT
+ * transactions for a 64 bit read, and we want to avoid unnecessary
+ * bus transactions.
+ */
+
+ /* This is the 64 bit group */
+
+ unsigned long pioavailshadow[6];
+ /* bitmap of send buffers available for the kernel to use with PIO. */
+ unsigned long pioavailkernel[6];
+ /* bitmap of send buffers which need to be disarmed. */
+ unsigned long pio_need_disarm[3];
+ /* bitmap of send buffers which are being written to. */
+ unsigned long pio_writing[3];
+ /* kr_revision shadow */
+ u64 revision;
+ /* Base GUID for device (from eeprom, network order) */
+ __be64 base_guid;
+
+ /*
+ * kr_sendpiobufbase value (chip offset of pio buffers), and the
+ * base of the 2KB buffer s(user processes only use 2K)
+ */
+ u64 piobufbase;
+ u32 pio2k_bufbase;
+
+ /* these are the "32 bit" regs */
+
+ /* number of GUIDs in the flash for this interface */
+ u32 nguid;
+ /*
+ * the following two are 32-bit bitmasks, but {test,clear,set}_bit
+ * all expect bit fields to be "unsigned long"
+ */
+ unsigned long rcvctrl; /* shadow per device rcvctrl */
+ unsigned long sendctrl; /* shadow per device sendctrl */
+
+ /* value we put in kr_rcvhdrcnt */
+ u32 rcvhdrcnt;
+ /* value we put in kr_rcvhdrsize */
+ u32 rcvhdrsize;
+ /* value we put in kr_rcvhdrentsize */
+ u32 rcvhdrentsize;
+ /* kr_ctxtcnt value */
+ u32 ctxtcnt;
+ /* kr_pagealign value */
+ u32 palign;
+ /* number of "2KB" PIO buffers */
+ u32 piobcnt2k;
+ /* size in bytes of "2KB" PIO buffers */
+ u32 piosize2k;
+ /* max usable size in dwords of a "2KB" PIO buffer before going "4KB" */
+ u32 piosize2kmax_dwords;
+ /* number of "4KB" PIO buffers */
+ u32 piobcnt4k;
+ /* size in bytes of "4KB" PIO buffers */
+ u32 piosize4k;
+ /* kr_rcvegrbase value */
+ u32 rcvegrbase;
+ /* kr_rcvtidbase value */
+ u32 rcvtidbase;
+ /* kr_rcvtidcnt value */
+ u32 rcvtidcnt;
+ /* kr_userregbase */
+ u32 uregbase;
+ /* shadow the control register contents */
+ u32 control;
+
+ /* chip address space used by 4k pio buffers */
+ u32 align4k;
+ /* size of each rcvegrbuffer */
+ u16 rcvegrbufsize;
+ /* log2 of above */
+ u16 rcvegrbufsize_shift;
+ /* localbus width (1, 2,4,8,16,32) from config space */
+ u32 lbus_width;
+ /* localbus speed in MHz */
+ u32 lbus_speed;
+ int unit; /* unit # of this chip */
+
+ /* start of CHIP_SPEC move to chipspec, but need code changes */
+ /* low and high portions of MSI capability/vector */
+ u32 msi_lo;
+ /* saved after PCIe init for restore after reset */
+ u32 msi_hi;
+ /* MSI data (vector) saved for restore */
+ u16 msi_data;
+ /* so we can rewrite it after a chip reset */
+ u32 pcibar0;
+ /* so we can rewrite it after a chip reset */
+ u32 pcibar1;
+ u64 rhdrhead_intr_off;
+
+ /*
+ * ASCII serial number, from flash, large enough for original
+ * all digit strings, and longer QLogic serial number format
+ */
+ u8 serial[16];
+ /* human readable board version */
+ u8 boardversion[96];
+ u8 lbus_info[32]; /* human readable localbus info */
+ /* chip major rev, from qib_revision */
+ u8 majrev;
+ /* chip minor rev, from qib_revision */
+ u8 minrev;
+
+ /* Misc small ints */
+ /* Number of physical ports available */
+ u8 num_pports;
+ /* Lowest context number which can be used by user processes */
+ u8 first_user_ctxt;
+ u8 n_krcv_queues;
+ u8 qpn_mask;
+ u8 skip_kctxt_mask;
+
+ u16 rhf_offset; /* offset of RHF within receive header entry */
+
+ /*
+ * GPIO pins for twsi-connected devices, and device code for eeprom
+ */
+ u8 gpio_sda_num;
+ u8 gpio_scl_num;
+ u8 twsi_eeprom_dev;
+ u8 board_atten;
+
+ /* Support (including locks) for EEPROM logging of errors and time */
+ /* control access to actual counters, timer */
+ spinlock_t eep_st_lock;
+ /* control high-level access to EEPROM */
+ struct mutex eep_lock;
+ uint64_t traffic_wds;
+ struct qib_diag_client *diag_client;
+ spinlock_t qib_diag_trans_lock; /* protect diag observer ops */
+ struct diag_observer_list_elt *diag_observer_list;
+
+ u8 psxmitwait_supported;
+ /* cycle length of PS* counters in HW (in picoseconds) */
+ u16 psxmitwait_check_rate;
+ /* high volume overflow errors defered to tasklet */
+ struct tasklet_struct error_tasklet;
+
+ int assigned_node_id; /* NUMA node closest to HCA */
+};
+
+/* hol_state values */
+#define QIB_HOL_UP 0
+#define QIB_HOL_INIT 1
+
+#define QIB_SDMA_SENDCTRL_OP_ENABLE (1U << 0)
+#define QIB_SDMA_SENDCTRL_OP_INTENABLE (1U << 1)
+#define QIB_SDMA_SENDCTRL_OP_HALT (1U << 2)
+#define QIB_SDMA_SENDCTRL_OP_CLEANUP (1U << 3)
+#define QIB_SDMA_SENDCTRL_OP_DRAIN (1U << 4)
+
+/* operation types for f_txchk_change() */
+#define TXCHK_CHG_TYPE_DIS1 3
+#define TXCHK_CHG_TYPE_ENAB1 2
+#define TXCHK_CHG_TYPE_KERN 1
+#define TXCHK_CHG_TYPE_USER 0
+
+#define QIB_CHASE_TIME msecs_to_jiffies(145)
+#define QIB_CHASE_DIS_TIME msecs_to_jiffies(160)
+
+/* Private data for file operations */
+struct qib_filedata {
+ struct qib_ctxtdata *rcd;
+ unsigned subctxt;
+ unsigned tidcursor;
+ struct qib_user_sdma_queue *pq;
+ int rec_cpu_num; /* for cpu affinity; -1 if none */
+};
+
+extern struct xarray qib_dev_table;
+extern struct qib_devdata *qib_lookup(int unit);
+extern u32 qib_cpulist_count;
+extern unsigned long *qib_cpulist;
+extern unsigned qib_cc_table_size;
+
+int qib_init(struct qib_devdata *, int);
+int init_chip_wc_pat(struct qib_devdata *dd, u32);
+int qib_enable_wc(struct qib_devdata *dd);
+void qib_disable_wc(struct qib_devdata *dd);
+int qib_count_units(int *npresentp, int *nupp);
+int qib_count_active_units(void);
+
+int qib_cdev_init(int minor, const char *name,
+ const struct file_operations *fops,
+ struct cdev **cdevp, struct device **devp);
+void qib_cdev_cleanup(struct cdev **cdevp, struct device **devp);
+int qib_dev_init(void);
+void qib_dev_cleanup(void);
+
+int qib_diag_add(struct qib_devdata *);
+void qib_diag_remove(struct qib_devdata *);
+void qib_handle_e_ibstatuschanged(struct qib_pportdata *, u64);
+void qib_sdma_update_tail(struct qib_pportdata *, u16); /* hold sdma_lock */
+
+int qib_decode_err(struct qib_devdata *dd, char *buf, size_t blen, u64 err);
+void qib_bad_intrstatus(struct qib_devdata *);
+void qib_handle_urcv(struct qib_devdata *, u64);
+
+/* clean up any per-chip chip-specific stuff */
+void qib_chip_cleanup(struct qib_devdata *);
+/* clean up any chip type-specific stuff */
+void qib_chip_done(void);
+
+/* check to see if we have to force ordering for write combining */
+int qib_unordered_wc(void);
+void qib_pio_copy(void __iomem *to, const void *from, size_t count);
+
+void qib_disarm_piobufs(struct qib_devdata *, unsigned, unsigned);
+int qib_disarm_piobufs_ifneeded(struct qib_ctxtdata *);
+void qib_disarm_piobufs_set(struct qib_devdata *, unsigned long *, unsigned);
+void qib_cancel_sends(struct qib_pportdata *);
+
+int qib_create_rcvhdrq(struct qib_devdata *, struct qib_ctxtdata *);
+int qib_setup_eagerbufs(struct qib_ctxtdata *);
+void qib_set_ctxtcnt(struct qib_devdata *);
+int qib_create_ctxts(struct qib_devdata *dd);
+struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *, u32, int);
+int qib_init_pportdata(struct qib_pportdata *, struct qib_devdata *, u8, u8);
+void qib_free_ctxtdata(struct qib_devdata *, struct qib_ctxtdata *);
+
+u32 qib_kreceive(struct qib_ctxtdata *, u32 *, u32 *);
+int qib_reset_device(int);
+int qib_wait_linkstate(struct qib_pportdata *, u32, int);
+int qib_set_linkstate(struct qib_pportdata *, u8);
+int qib_set_mtu(struct qib_pportdata *, u16);
+int qib_set_lid(struct qib_pportdata *, u32, u8);
+void qib_hol_down(struct qib_pportdata *);
+void qib_hol_init(struct qib_pportdata *);
+void qib_hol_up(struct qib_pportdata *);
+void qib_hol_event(struct timer_list *);
+void qib_disable_after_error(struct qib_devdata *);
+int qib_set_uevent_bits(struct qib_pportdata *, const int);
+
+/* for use in system calls, where we want to know device type, etc. */
+#define ctxt_fp(fp) \
+ (((struct qib_filedata *)(fp)->private_data)->rcd)
+#define subctxt_fp(fp) \
+ (((struct qib_filedata *)(fp)->private_data)->subctxt)
+#define tidcursor_fp(fp) \
+ (((struct qib_filedata *)(fp)->private_data)->tidcursor)
+#define user_sdma_queue_fp(fp) \
+ (((struct qib_filedata *)(fp)->private_data)->pq)
+
+static inline struct qib_devdata *dd_from_ppd(struct qib_pportdata *ppd)
+{
+ return ppd->dd;
+}
+
+static inline struct qib_devdata *dd_from_dev(struct qib_ibdev *dev)
+{
+ return container_of(dev, struct qib_devdata, verbs_dev);
+}
+
+static inline struct qib_devdata *dd_from_ibdev(struct ib_device *ibdev)
+{
+ return dd_from_dev(to_idev(ibdev));
+}
+
+static inline struct qib_pportdata *ppd_from_ibp(struct qib_ibport *ibp)
+{
+ return container_of(ibp, struct qib_pportdata, ibport_data);
+}
+
+static inline struct qib_ibport *to_iport(struct ib_device *ibdev, u32 port)
+{
+ struct qib_devdata *dd = dd_from_ibdev(ibdev);
+ u32 pidx = port - 1; /* IB number port from 1, hdw from 0 */
+
+ WARN_ON(pidx >= dd->num_pports);
+ return &dd->pport[pidx].ibport_data;
+}
+
+/*
+ * values for dd->flags (_device_ related flags) and
+ */
+#define QIB_HAS_LINK_LATENCY 0x1 /* supports link latency (IB 1.2) */
+#define QIB_INITTED 0x2 /* chip and driver up and initted */
+#define QIB_DOING_RESET 0x4 /* in the middle of doing chip reset */
+#define QIB_PRESENT 0x8 /* chip accesses can be done */
+#define QIB_PIO_FLUSH_WC 0x10 /* Needs Write combining flush for PIO */
+#define QIB_HAS_THRESH_UPDATE 0x40
+#define QIB_HAS_SDMA_TIMEOUT 0x80
+#define QIB_USE_SPCL_TRIG 0x100 /* SpecialTrigger launch enabled */
+#define QIB_NODMA_RTAIL 0x200 /* rcvhdrtail register DMA enabled */
+#define QIB_HAS_INTX 0x800 /* Supports INTx interrupts */
+#define QIB_HAS_SEND_DMA 0x1000 /* Supports Send DMA */
+#define QIB_HAS_VLSUPP 0x2000 /* Supports multiple VLs; PBC different */
+#define QIB_HAS_HDRSUPP 0x4000 /* Supports header suppression */
+#define QIB_BADINTR 0x8000 /* severe interrupt problems */
+#define QIB_DCA_ENABLED 0x10000 /* Direct Cache Access enabled */
+#define QIB_HAS_QSFP 0x20000 /* device (card instance) has QSFP */
+#define QIB_SHUTDOWN 0x40000 /* device is shutting down */
+
+/*
+ * values for ppd->lflags (_ib_port_ related flags)
+ */
+#define QIBL_LINKV 0x1 /* IB link state valid */
+#define QIBL_LINKDOWN 0x8 /* IB link is down */
+#define QIBL_LINKINIT 0x10 /* IB link level is up */
+#define QIBL_LINKARMED 0x20 /* IB link is ARMED */
+#define QIBL_LINKACTIVE 0x40 /* IB link is ACTIVE */
+/* leave a gap for more IB-link state */
+#define QIBL_IB_AUTONEG_INPROG 0x1000 /* non-IBTA DDR/QDR neg active */
+#define QIBL_IB_AUTONEG_FAILED 0x2000 /* non-IBTA DDR/QDR neg failed */
+#define QIBL_IB_LINK_DISABLED 0x4000 /* Linkdown-disable forced,
+ * Do not try to bring up */
+#define QIBL_IB_FORCE_NOTIFY 0x8000 /* force notify on next ib change */
+
+/* IB dword length mask in PBC (lower 11 bits); same for all chips */
+#define QIB_PBC_LENGTH_MASK ((1 << 11) - 1)
+
+
+/* ctxt_flag bit offsets */
+ /* waiting for a packet to arrive */
+#define QIB_CTXT_WAITING_RCV 2
+ /* master has not finished initializing */
+#define QIB_CTXT_MASTER_UNINIT 4
+ /* waiting for an urgent packet to arrive */
+#define QIB_CTXT_WAITING_URG 5
+
+/* free up any allocated data at closes */
+void qib_free_data(struct qib_ctxtdata *dd);
+void qib_chg_pioavailkernel(struct qib_devdata *, unsigned, unsigned,
+ u32, struct qib_ctxtdata *);
+struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *,
+ const struct pci_device_id *);
+struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *,
+ const struct pci_device_id *);
+struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *,
+ const struct pci_device_id *);
+void qib_free_devdata(struct qib_devdata *);
+struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra);
+
+#define QIB_TWSI_NO_DEV 0xFF
+/* Below qib_twsi_ functions must be called with eep_lock held */
+int qib_twsi_reset(struct qib_devdata *dd);
+int qib_twsi_blk_rd(struct qib_devdata *dd, int dev, int addr, void *buffer,
+ int len);
+int qib_twsi_blk_wr(struct qib_devdata *dd, int dev, int addr,
+ const void *buffer, int len);
+void qib_get_eeprom_info(struct qib_devdata *);
+void qib_dump_lookup_output_queue(struct qib_devdata *);
+void qib_force_pio_avail_update(struct qib_devdata *);
+void qib_clear_symerror_on_linkup(struct timer_list *t);
+
+/*
+ * Set LED override, only the two LSBs have "public" meaning, but
+ * any non-zero value substitutes them for the Link and LinkTrain
+ * LED states.
+ */
+#define QIB_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
+#define QIB_LED_LOG 2 /* Logical (link) YELLOW LED */
+void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val);
+
+/* send dma routines */
+int qib_setup_sdma(struct qib_pportdata *);
+void qib_teardown_sdma(struct qib_pportdata *);
+void __qib_sdma_intr(struct qib_pportdata *);
+void qib_sdma_intr(struct qib_pportdata *);
+void qib_user_sdma_send_desc(struct qib_pportdata *dd,
+ struct list_head *pktlist);
+int qib_sdma_verbs_send(struct qib_pportdata *, struct rvt_sge_state *,
+ u32, struct qib_verbs_txreq *);
+/* ppd->sdma_lock should be locked before calling this. */
+int qib_sdma_make_progress(struct qib_pportdata *dd);
+
+/* must be called under qib_sdma_lock */
+static inline u16 qib_sdma_descq_freecnt(const struct qib_pportdata *ppd)
+{
+ return ppd->sdma_descq_cnt -
+ (ppd->sdma_descq_added - ppd->sdma_descq_removed) - 1;
+}
+
+static inline int __qib_sdma_running(struct qib_pportdata *ppd)
+{
+ return ppd->sdma_state.current_state == qib_sdma_state_s99_running;
+}
+int qib_sdma_running(struct qib_pportdata *);
+void dump_sdma_state(struct qib_pportdata *ppd);
+void __qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events);
+void qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events);
+
+/*
+ * number of words used for protocol header if not set by qib_userinit();
+ */
+#define QIB_DFLT_RCVHDRSIZE 9
+
+/*
+ * We need to be able to handle an IB header of at least 24 dwords.
+ * We need the rcvhdrq large enough to handle largest IB header, but
+ * still have room for a 2KB MTU standard IB packet.
+ * Additionally, some processor/memory controller combinations
+ * benefit quite strongly from having the DMA'ed data be cacheline
+ * aligned and a cacheline multiple, so we set the size to 32 dwords
+ * (2 64-byte primary cachelines for pretty much all processors of
+ * interest). The alignment hurts nothing, other than using somewhat
+ * more memory.
+ */
+#define QIB_RCVHDR_ENTSIZE 32
+
+int qib_get_user_pages(unsigned long, size_t, struct page **);
+void qib_release_user_pages(struct page **, size_t);
+int qib_eeprom_read(struct qib_devdata *, u8, void *, int);
+int qib_eeprom_write(struct qib_devdata *, u8, const void *, int);
+u32 __iomem *qib_getsendbuf_range(struct qib_devdata *, u32 *, u32, u32);
+void qib_sendbuf_done(struct qib_devdata *, unsigned);
+
+static inline void qib_clear_rcvhdrtail(const struct qib_ctxtdata *rcd)
+{
+ *((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL;
+}
+
+static inline u32 qib_get_rcvhdrtail(const struct qib_ctxtdata *rcd)
+{
+ /*
+ * volatile because it's a DMA target from the chip, routine is
+ * inlined, and don't want register caching or reordering.
+ */
+ return (u32) le64_to_cpu(
+ *((volatile __le64 *)rcd->rcvhdrtail_kvaddr)); /* DMA'ed */
+}
+
+/*
+ * sysfs interface.
+ */
+
+extern const char ib_qib_version[];
+extern const struct attribute_group qib_attr_group;
+extern const struct attribute_group *qib_attr_port_groups[];
+
+int qib_device_create(struct qib_devdata *);
+void qib_device_remove(struct qib_devdata *);
+
+/* Hook for sysfs read of QSFP */
+extern int qib_qsfp_dump(struct qib_pportdata *ppd, char *buf, int len);
+
+int __init qib_init_qibfs(void);
+int __exit qib_exit_qibfs(void);
+
+int qibfs_add(struct qib_devdata *);
+int qibfs_remove(struct qib_devdata *);
+
+int qib_pcie_init(struct pci_dev *, const struct pci_device_id *);
+int qib_pcie_ddinit(struct qib_devdata *, struct pci_dev *,
+ const struct pci_device_id *);
+void qib_pcie_ddcleanup(struct qib_devdata *);
+int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent);
+void qib_free_irq(struct qib_devdata *dd);
+int qib_reinit_intr(struct qib_devdata *dd);
+void qib_pcie_getcmd(struct qib_devdata *, u16 *, u8 *, u8 *);
+void qib_pcie_reenable(struct qib_devdata *, u16, u8, u8);
+/* interrupts for device */
+u64 qib_int_counter(struct qib_devdata *);
+/* interrupt for all devices */
+u64 qib_sps_ints(void);
+
+/*
+ * dma_addr wrappers - all 0's invalid for hw
+ */
+int qib_map_page(struct pci_dev *d, struct page *p, dma_addr_t *daddr);
+struct pci_dev *qib_get_pci_dev(struct rvt_dev_info *rdi);
+
+/*
+ * Flush write combining store buffers (if present) and perform a write
+ * barrier.
+ */
+static inline void qib_flush_wc(void)
+{
+#if defined(CONFIG_X86_64)
+ asm volatile("sfence" : : : "memory");
+#else
+ wmb(); /* no reorder around wc flush */
+#endif
+}
+
+/* global module parameter variables */
+extern unsigned qib_ibmtu;
+extern ushort qib_cfgctxts;
+extern ushort qib_num_cfg_vls;
+extern ushort qib_mini_init; /* If set, do few (ideally 0) writes to chip */
+extern unsigned qib_n_krcv_queues;
+extern unsigned qib_sdma_fetch_arb;
+extern unsigned qib_compat_ddr_negotiate;
+extern int qib_special_trigger;
+extern unsigned qib_numa_aware;
+
+extern struct mutex qib_mutex;
+
+/* Number of seconds before our card status check... */
+#define STATUS_TIMEOUT 60
+
+#define QIB_DRV_NAME "ib_qib"
+#define QIB_USER_MINOR_BASE 0
+#define QIB_TRACE_MINOR 127
+#define QIB_DIAGPKT_MINOR 128
+#define QIB_DIAG_MINOR_BASE 129
+#define QIB_NMINORS 255
+
+#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
+#define PCI_VENDOR_ID_QLOGIC 0x1077
+#define PCI_DEVICE_ID_QLOGIC_IB_6120 0x10
+#define PCI_DEVICE_ID_QLOGIC_IB_7220 0x7220
+#define PCI_DEVICE_ID_QLOGIC_IB_7322 0x7322
+
+/*
+ * qib_early_err is used (only!) to print early errors before devdata is
+ * allocated, or when dd->pcidev may not be valid, and at the tail end of
+ * cleanup when devdata may have been freed, etc. qib_dev_porterr is
+ * the same as qib_dev_err, but is used when the message really needs
+ * the IB port# to be definitive as to what's happening..
+ * All of these go to the trace log, and the trace log entry is done
+ * first to avoid possible serial port delays from printk.
+ */
+#define qib_early_err(dev, fmt, ...) \
+ dev_err(dev, fmt, ##__VA_ARGS__)
+
+#define qib_dev_err(dd, fmt, ...) \
+ dev_err(&(dd)->pcidev->dev, "%s: " fmt, \
+ rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
+
+#define qib_dev_warn(dd, fmt, ...) \
+ dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \
+ rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
+
+#define qib_dev_porterr(dd, port, fmt, ...) \
+ dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \
+ rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), (dd)->unit, (port), \
+ ##__VA_ARGS__)
+
+#define qib_devinfo(pcidev, fmt, ...) \
+ dev_info(&(pcidev)->dev, fmt, ##__VA_ARGS__)
+
+/*
+ * this is used for formatting hw error messages...
+ */
+struct qib_hwerror_msgs {
+ u64 mask;
+ const char *msg;
+ size_t sz;
+};
+
+#define QLOGIC_IB_HWE_MSG(a, b) { .mask = a, .msg = b }
+
+/* in qib_intr.c... */
+void qib_format_hwerrors(u64 hwerrs,
+ const struct qib_hwerror_msgs *hwerrmsgs,
+ size_t nhwerrmsgs, char *msg, size_t lmsg);
+
+void qib_stop_send_queue(struct rvt_qp *qp);
+void qib_quiesce_qp(struct rvt_qp *qp);
+void qib_flush_qp_waiters(struct rvt_qp *qp);
+int qib_mtu_to_path_mtu(u32 mtu);
+u32 qib_mtu_from_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp, u32 pmtu);
+void qib_notify_error_qp(struct rvt_qp *qp);
+int qib_get_pmtu_from_attr(struct rvt_dev_info *rdi, struct rvt_qp *qp,
+ struct ib_qp_attr *attr);
+
+#endif /* _QIB_KERNEL_H */