diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_eeprom.c')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_eeprom.c | 271 |
1 files changed, 271 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_eeprom.c b/drivers/infiniband/hw/qib/qib_eeprom.c new file mode 100644 index 000000000..bf660c001 --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_eeprom.c @@ -0,0 +1,271 @@ +/* + * Copyright (c) 2012 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/vmalloc.h> + +#include "qib.h" + +/* + * Functions specific to the serial EEPROM on cards handled by ib_qib. + * The actual serail interface code is in qib_twsi.c. This file is a client + */ + +/** + * qib_eeprom_read - receives bytes from the eeprom via I2C + * @dd: the qlogic_ib device + * @eeprom_offset: address to read from + * @buff: where to store result + * @len: number of bytes to receive + */ +int qib_eeprom_read(struct qib_devdata *dd, u8 eeprom_offset, + void *buff, int len) +{ + int ret; + + ret = mutex_lock_interruptible(&dd->eep_lock); + if (!ret) { + ret = qib_twsi_reset(dd); + if (ret) + qib_dev_err(dd, "EEPROM Reset for read failed\n"); + else + ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev, + eeprom_offset, buff, len); + mutex_unlock(&dd->eep_lock); + } + + return ret; +} + +/* + * Actually update the eeprom, first doing write enable if + * needed, then restoring write enable state. + * Must be called with eep_lock held + */ +static int eeprom_write_with_enable(struct qib_devdata *dd, u8 offset, + const void *buf, int len) +{ + int ret, pwen; + + pwen = dd->f_eeprom_wen(dd, 1); + ret = qib_twsi_reset(dd); + if (ret) + qib_dev_err(dd, "EEPROM Reset for write failed\n"); + else + ret = qib_twsi_blk_wr(dd, dd->twsi_eeprom_dev, + offset, buf, len); + dd->f_eeprom_wen(dd, pwen); + return ret; +} + +/** + * qib_eeprom_write - writes data to the eeprom via I2C + * @dd: the qlogic_ib device + * @eeprom_offset: where to place data + * @buff: data to write + * @len: number of bytes to write + */ +int qib_eeprom_write(struct qib_devdata *dd, u8 eeprom_offset, + const void *buff, int len) +{ + int ret; + + ret = mutex_lock_interruptible(&dd->eep_lock); + if (!ret) { + ret = eeprom_write_with_enable(dd, eeprom_offset, buff, len); + mutex_unlock(&dd->eep_lock); + } + + return ret; +} + +static u8 flash_csum(struct qib_flash *ifp, int adjust) +{ + u8 *ip = (u8 *) ifp; + u8 csum = 0, len; + + /* + * Limit length checksummed to max length of actual data. + * Checksum of erased eeprom will still be bad, but we avoid + * reading past the end of the buffer we were passed. + */ + len = ifp->if_length; + if (len > sizeof(struct qib_flash)) + len = sizeof(struct qib_flash); + while (len--) + csum += *ip++; + csum -= ifp->if_csum; + csum = ~csum; + if (adjust) + ifp->if_csum = csum; + + return csum; +} + +/** + * qib_get_eeprom_info- get the GUID et al. from the TSWI EEPROM device + * @dd: the qlogic_ib device + * + * We have the capability to use the nguid field, and get + * the guid from the first chip's flash, to use for all of them. + */ +void qib_get_eeprom_info(struct qib_devdata *dd) +{ + void *buf; + struct qib_flash *ifp; + __be64 guid; + int len, eep_stat; + u8 csum, *bguid; + int t = dd->unit; + struct qib_devdata *dd0 = qib_lookup(0); + + if (t && dd0->nguid > 1 && t <= dd0->nguid) { + u8 oguid; + + dd->base_guid = dd0->base_guid; + bguid = (u8 *) &dd->base_guid; + + oguid = bguid[7]; + bguid[7] += t; + if (oguid > bguid[7]) { + if (bguid[6] == 0xff) { + if (bguid[5] == 0xff) { + qib_dev_err(dd, + "Can't set GUID from base, wraps to OUI!\n"); + dd->base_guid = 0; + goto bail; + } + bguid[5]++; + } + bguid[6]++; + } + dd->nguid = 1; + goto bail; + } + + /* + * Read full flash, not just currently used part, since it may have + * been written with a newer definition. + * */ + len = sizeof(struct qib_flash); + buf = vmalloc(len); + if (!buf) + goto bail; + + /* + * Use "public" eeprom read function, which does locking and + * figures out device. This will migrate to chip-specific. + */ + eep_stat = qib_eeprom_read(dd, 0, buf, len); + + if (eep_stat) { + qib_dev_err(dd, "Failed reading GUID from eeprom\n"); + goto done; + } + ifp = (struct qib_flash *)buf; + + csum = flash_csum(ifp, 0); + if (csum != ifp->if_csum) { + qib_devinfo(dd->pcidev, + "Bad I2C flash checksum: 0x%x, not 0x%x\n", + csum, ifp->if_csum); + goto done; + } + if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) || + *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) { + qib_dev_err(dd, + "Invalid GUID %llx from flash; ignoring\n", + *(unsigned long long *) ifp->if_guid); + /* don't allow GUID if all 0 or all 1's */ + goto done; + } + + /* complain, but allow it */ + if (*(u64 *) ifp->if_guid == 0x100007511000000ULL) + qib_devinfo(dd->pcidev, + "Warning, GUID %llx is default, probably not correct!\n", + *(unsigned long long *) ifp->if_guid); + + bguid = ifp->if_guid; + if (!bguid[0] && !bguid[1] && !bguid[2]) { + /* + * Original incorrect GUID format in flash; fix in + * core copy, by shifting up 2 octets; don't need to + * change top octet, since both it and shifted are 0. + */ + bguid[1] = bguid[3]; + bguid[2] = bguid[4]; + bguid[3] = 0; + bguid[4] = 0; + guid = *(__be64 *) ifp->if_guid; + } else + guid = *(__be64 *) ifp->if_guid; + dd->base_guid = guid; + dd->nguid = ifp->if_numguid; + /* + * Things are slightly complicated by the desire to transparently + * support both the Pathscale 10-digit serial number and the QLogic + * 13-character version. + */ + if ((ifp->if_fversion > 1) && ifp->if_sprefix[0] && + ((u8 *) ifp->if_sprefix)[0] != 0xFF) { + char *snp = dd->serial; + + /* + * This board has a Serial-prefix, which is stored + * elsewhere for backward-compatibility. + */ + memcpy(snp, ifp->if_sprefix, sizeof(ifp->if_sprefix)); + snp[sizeof(ifp->if_sprefix)] = '\0'; + len = strlen(snp); + snp += len; + len = sizeof(dd->serial) - len; + if (len > sizeof(ifp->if_serial)) + len = sizeof(ifp->if_serial); + memcpy(snp, ifp->if_serial, len); + } else { + memcpy(dd->serial, ifp->if_serial, sizeof(ifp->if_serial)); + } + if (!strstr(ifp->if_comment, "Tested successfully")) + qib_dev_err(dd, + "Board SN %s did not pass functional test: %s\n", + dd->serial, ifp->if_comment); + +done: + vfree(buf); + +bail:; +} + |