diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_init.c')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_init.c | 1798 |
1 files changed, 1798 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c new file mode 100644 index 000000000..452110084 --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_init.c @@ -0,0 +1,1798 @@ +/* + * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved. + * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/printk.h> +#ifdef CONFIG_INFINIBAND_QIB_DCA +#include <linux/dca.h> +#endif +#include <rdma/rdma_vt.h> + +#include "qib.h" +#include "qib_common.h" +#include "qib_mad.h" +#ifdef CONFIG_DEBUG_FS +#include "qib_debugfs.h" +#include "qib_verbs.h" +#endif + +#undef pr_fmt +#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt + +/* + * min buffers we want to have per context, after driver + */ +#define QIB_MIN_USER_CTXT_BUFCNT 7 + +#define QLOGIC_IB_R_SOFTWARE_MASK 0xFF +#define QLOGIC_IB_R_SOFTWARE_SHIFT 24 +#define QLOGIC_IB_R_EMULATOR_MASK (1ULL<<62) + +/* + * Number of ctxts we are configured to use (to allow for more pio + * buffers per ctxt, etc.) Zero means use chip value. + */ +ushort qib_cfgctxts; +module_param_named(cfgctxts, qib_cfgctxts, ushort, S_IRUGO); +MODULE_PARM_DESC(cfgctxts, "Set max number of contexts to use"); + +unsigned qib_numa_aware; +module_param_named(numa_aware, qib_numa_aware, uint, S_IRUGO); +MODULE_PARM_DESC(numa_aware, + "0 -> PSM allocation close to HCA, 1 -> PSM allocation local to process"); + +/* + * If set, do not write to any regs if avoidable, hack to allow + * check for deranged default register values. + */ +ushort qib_mini_init; +module_param_named(mini_init, qib_mini_init, ushort, S_IRUGO); +MODULE_PARM_DESC(mini_init, "If set, do minimal diag init"); + +unsigned qib_n_krcv_queues; +module_param_named(krcvqs, qib_n_krcv_queues, uint, S_IRUGO); +MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port"); + +unsigned qib_cc_table_size; +module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO); +MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984"); + +static void verify_interrupt(struct timer_list *); + +DEFINE_XARRAY_FLAGS(qib_dev_table, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ); +u32 qib_cpulist_count; +unsigned long *qib_cpulist; + +/* set number of contexts we'll actually use */ +void qib_set_ctxtcnt(struct qib_devdata *dd) +{ + if (!qib_cfgctxts) { + dd->cfgctxts = dd->first_user_ctxt + num_online_cpus(); + if (dd->cfgctxts > dd->ctxtcnt) + dd->cfgctxts = dd->ctxtcnt; + } else if (qib_cfgctxts < dd->num_pports) + dd->cfgctxts = dd->ctxtcnt; + else if (qib_cfgctxts <= dd->ctxtcnt) + dd->cfgctxts = qib_cfgctxts; + else + dd->cfgctxts = dd->ctxtcnt; + dd->freectxts = (dd->first_user_ctxt > dd->cfgctxts) ? 0 : + dd->cfgctxts - dd->first_user_ctxt; +} + +/* + * Common code for creating the receive context array. + */ +int qib_create_ctxts(struct qib_devdata *dd) +{ + unsigned i; + int local_node_id = pcibus_to_node(dd->pcidev->bus); + + if (local_node_id < 0) + local_node_id = numa_node_id(); + dd->assigned_node_id = local_node_id; + + /* + * Allocate full ctxtcnt array, rather than just cfgctxts, because + * cleanup iterates across all possible ctxts. + */ + dd->rcd = kcalloc(dd->ctxtcnt, sizeof(*dd->rcd), GFP_KERNEL); + if (!dd->rcd) + return -ENOMEM; + + /* create (one or more) kctxt */ + for (i = 0; i < dd->first_user_ctxt; ++i) { + struct qib_pportdata *ppd; + struct qib_ctxtdata *rcd; + + if (dd->skip_kctxt_mask & (1 << i)) + continue; + + ppd = dd->pport + (i % dd->num_pports); + + rcd = qib_create_ctxtdata(ppd, i, dd->assigned_node_id); + if (!rcd) { + qib_dev_err(dd, + "Unable to allocate ctxtdata for Kernel ctxt, failing\n"); + kfree(dd->rcd); + dd->rcd = NULL; + return -ENOMEM; + } + rcd->pkeys[0] = QIB_DEFAULT_P_KEY; + rcd->seq_cnt = 1; + } + return 0; +} + +/* + * Common code for user and kernel context setup. + */ +struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *ppd, u32 ctxt, + int node_id) +{ + struct qib_devdata *dd = ppd->dd; + struct qib_ctxtdata *rcd; + + rcd = kzalloc_node(sizeof(*rcd), GFP_KERNEL, node_id); + if (rcd) { + INIT_LIST_HEAD(&rcd->qp_wait_list); + rcd->node_id = node_id; + rcd->ppd = ppd; + rcd->dd = dd; + rcd->cnt = 1; + rcd->ctxt = ctxt; + dd->rcd[ctxt] = rcd; +#ifdef CONFIG_DEBUG_FS + if (ctxt < dd->first_user_ctxt) { /* N/A for PSM contexts */ + rcd->opstats = kzalloc_node(sizeof(*rcd->opstats), + GFP_KERNEL, node_id); + if (!rcd->opstats) { + kfree(rcd); + qib_dev_err(dd, + "Unable to allocate per ctxt stats buffer\n"); + return NULL; + } + } +#endif + dd->f_init_ctxt(rcd); + + /* + * To avoid wasting a lot of memory, we allocate 32KB chunks + * of physically contiguous memory, advance through it until + * used up and then allocate more. Of course, we need + * memory to store those extra pointers, now. 32KB seems to + * be the most that is "safe" under memory pressure + * (creating large files and then copying them over + * NFS while doing lots of MPI jobs). The OOM killer can + * get invoked, even though we say we can sleep and this can + * cause significant system problems.... + */ + rcd->rcvegrbuf_size = 0x8000; + rcd->rcvegrbufs_perchunk = + rcd->rcvegrbuf_size / dd->rcvegrbufsize; + rcd->rcvegrbuf_chunks = (rcd->rcvegrcnt + + rcd->rcvegrbufs_perchunk - 1) / + rcd->rcvegrbufs_perchunk; + rcd->rcvegrbufs_perchunk_shift = + ilog2(rcd->rcvegrbufs_perchunk); + } + return rcd; +} + +/* + * Common code for initializing the physical port structure. + */ +int qib_init_pportdata(struct qib_pportdata *ppd, struct qib_devdata *dd, + u8 hw_pidx, u8 port) +{ + int size; + + ppd->dd = dd; + ppd->hw_pidx = hw_pidx; + ppd->port = port; /* IB port number, not index */ + + spin_lock_init(&ppd->sdma_lock); + spin_lock_init(&ppd->lflags_lock); + spin_lock_init(&ppd->cc_shadow_lock); + init_waitqueue_head(&ppd->state_wait); + + timer_setup(&ppd->symerr_clear_timer, qib_clear_symerror_on_linkup, 0); + + ppd->qib_wq = NULL; + ppd->ibport_data.pmastats = + alloc_percpu(struct qib_pma_counters); + if (!ppd->ibport_data.pmastats) + return -ENOMEM; + ppd->ibport_data.rvp.rc_acks = alloc_percpu(u64); + ppd->ibport_data.rvp.rc_qacks = alloc_percpu(u64); + ppd->ibport_data.rvp.rc_delayed_comp = alloc_percpu(u64); + if (!(ppd->ibport_data.rvp.rc_acks) || + !(ppd->ibport_data.rvp.rc_qacks) || + !(ppd->ibport_data.rvp.rc_delayed_comp)) + return -ENOMEM; + + if (qib_cc_table_size < IB_CCT_MIN_ENTRIES) + goto bail; + + ppd->cc_supported_table_entries = min(max_t(int, qib_cc_table_size, + IB_CCT_MIN_ENTRIES), IB_CCT_ENTRIES*IB_CC_TABLE_CAP_DEFAULT); + + ppd->cc_max_table_entries = + ppd->cc_supported_table_entries/IB_CCT_ENTRIES; + + size = IB_CC_TABLE_CAP_DEFAULT * sizeof(struct ib_cc_table_entry) + * IB_CCT_ENTRIES; + ppd->ccti_entries = kzalloc(size, GFP_KERNEL); + if (!ppd->ccti_entries) + goto bail; + + size = IB_CC_CCS_ENTRIES * sizeof(struct ib_cc_congestion_entry); + ppd->congestion_entries = kzalloc(size, GFP_KERNEL); + if (!ppd->congestion_entries) + goto bail_1; + + size = sizeof(struct cc_table_shadow); + ppd->ccti_entries_shadow = kzalloc(size, GFP_KERNEL); + if (!ppd->ccti_entries_shadow) + goto bail_2; + + size = sizeof(struct ib_cc_congestion_setting_attr); + ppd->congestion_entries_shadow = kzalloc(size, GFP_KERNEL); + if (!ppd->congestion_entries_shadow) + goto bail_3; + + return 0; + +bail_3: + kfree(ppd->ccti_entries_shadow); + ppd->ccti_entries_shadow = NULL; +bail_2: + kfree(ppd->congestion_entries); + ppd->congestion_entries = NULL; +bail_1: + kfree(ppd->ccti_entries); + ppd->ccti_entries = NULL; +bail: + /* User is intentionally disabling the congestion control agent */ + if (!qib_cc_table_size) + return 0; + + if (qib_cc_table_size < IB_CCT_MIN_ENTRIES) { + qib_cc_table_size = 0; + qib_dev_err(dd, + "Congestion Control table size %d less than minimum %d for port %d\n", + qib_cc_table_size, IB_CCT_MIN_ENTRIES, port); + } + + qib_dev_err(dd, "Congestion Control Agent disabled for port %d\n", + port); + return 0; +} + +static int init_pioavailregs(struct qib_devdata *dd) +{ + int ret, pidx; + u64 *status_page; + + dd->pioavailregs_dma = dma_alloc_coherent( + &dd->pcidev->dev, PAGE_SIZE, &dd->pioavailregs_phys, + GFP_KERNEL); + if (!dd->pioavailregs_dma) { + qib_dev_err(dd, + "failed to allocate PIOavail reg area in memory\n"); + ret = -ENOMEM; + goto done; + } + + /* + * We really want L2 cache aligned, but for current CPUs of + * interest, they are the same. + */ + status_page = (u64 *) + ((char *) dd->pioavailregs_dma + + ((2 * L1_CACHE_BYTES + + dd->pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES)); + /* device status comes first, for backwards compatibility */ + dd->devstatusp = status_page; + *status_page++ = 0; + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + dd->pport[pidx].statusp = status_page; + *status_page++ = 0; + } + + /* + * Setup buffer to hold freeze and other messages, accessible to + * apps, following statusp. This is per-unit, not per port. + */ + dd->freezemsg = (char *) status_page; + *dd->freezemsg = 0; + /* length of msg buffer is "whatever is left" */ + ret = (char *) status_page - (char *) dd->pioavailregs_dma; + dd->freezelen = PAGE_SIZE - ret; + + ret = 0; + +done: + return ret; +} + +/** + * init_shadow_tids - allocate the shadow TID array + * @dd: the qlogic_ib device + * + * allocate the shadow TID array, so we can qib_munlock previous + * entries. It may make more sense to move the pageshadow to the + * ctxt data structure, so we only allocate memory for ctxts actually + * in use, since we at 8k per ctxt, now. + * We don't want failures here to prevent use of the driver/chip, + * so no return value. + */ +static void init_shadow_tids(struct qib_devdata *dd) +{ + struct page **pages; + dma_addr_t *addrs; + + pages = vzalloc(array_size(sizeof(struct page *), + dd->cfgctxts * dd->rcvtidcnt)); + if (!pages) + goto bail; + + addrs = vzalloc(array_size(sizeof(dma_addr_t), + dd->cfgctxts * dd->rcvtidcnt)); + if (!addrs) + goto bail_free; + + dd->pageshadow = pages; + dd->physshadow = addrs; + return; + +bail_free: + vfree(pages); +bail: + dd->pageshadow = NULL; +} + +/* + * Do initialization for device that is only needed on + * first detect, not on resets. + */ +static int loadtime_init(struct qib_devdata *dd) +{ + int ret = 0; + + if (((dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) & + QLOGIC_IB_R_SOFTWARE_MASK) != QIB_CHIP_SWVERSION) { + qib_dev_err(dd, + "Driver only handles version %d, chip swversion is %d (%llx), failing\n", + QIB_CHIP_SWVERSION, + (int)(dd->revision >> + QLOGIC_IB_R_SOFTWARE_SHIFT) & + QLOGIC_IB_R_SOFTWARE_MASK, + (unsigned long long) dd->revision); + ret = -ENOSYS; + goto done; + } + + if (dd->revision & QLOGIC_IB_R_EMULATOR_MASK) + qib_devinfo(dd->pcidev, "%s", dd->boardversion); + + spin_lock_init(&dd->pioavail_lock); + spin_lock_init(&dd->sendctrl_lock); + spin_lock_init(&dd->uctxt_lock); + spin_lock_init(&dd->qib_diag_trans_lock); + spin_lock_init(&dd->eep_st_lock); + mutex_init(&dd->eep_lock); + + if (qib_mini_init) + goto done; + + ret = init_pioavailregs(dd); + init_shadow_tids(dd); + + qib_get_eeprom_info(dd); + + /* setup time (don't start yet) to verify we got interrupt */ + timer_setup(&dd->intrchk_timer, verify_interrupt, 0); +done: + return ret; +} + +/** + * init_after_reset - re-initialize after a reset + * @dd: the qlogic_ib device + * + * sanity check at least some of the values after reset, and + * ensure no receive or transmit (explicitly, in case reset + * failed + */ +static int init_after_reset(struct qib_devdata *dd) +{ + int i; + + /* + * Ensure chip does no sends or receives, tail updates, or + * pioavail updates while we re-initialize. This is mostly + * for the driver data structures, not chip registers. + */ + for (i = 0; i < dd->num_pports; ++i) { + /* + * ctxt == -1 means "all contexts". Only really safe for + * _dis_abling things, as here. + */ + dd->f_rcvctrl(dd->pport + i, QIB_RCVCTRL_CTXT_DIS | + QIB_RCVCTRL_INTRAVAIL_DIS | + QIB_RCVCTRL_TAILUPD_DIS, -1); + /* Redundant across ports for some, but no big deal. */ + dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_DIS | + QIB_SENDCTRL_AVAIL_DIS); + } + + return 0; +} + +static void enable_chip(struct qib_devdata *dd) +{ + u64 rcvmask; + int i; + + /* + * Enable PIO send, and update of PIOavail regs to memory. + */ + for (i = 0; i < dd->num_pports; ++i) + dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_ENB | + QIB_SENDCTRL_AVAIL_ENB); + /* + * Enable kernel ctxts' receive and receive interrupt. + * Other ctxts done as user opens and inits them. + */ + rcvmask = QIB_RCVCTRL_CTXT_ENB | QIB_RCVCTRL_INTRAVAIL_ENB; + rcvmask |= (dd->flags & QIB_NODMA_RTAIL) ? + QIB_RCVCTRL_TAILUPD_DIS : QIB_RCVCTRL_TAILUPD_ENB; + for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) { + struct qib_ctxtdata *rcd = dd->rcd[i]; + + if (rcd) + dd->f_rcvctrl(rcd->ppd, rcvmask, i); + } +} + +static void verify_interrupt(struct timer_list *t) +{ + struct qib_devdata *dd = from_timer(dd, t, intrchk_timer); + u64 int_counter; + + if (!dd) + return; /* being torn down */ + + /* + * If we don't have a lid or any interrupts, let the user know and + * don't bother checking again. + */ + int_counter = qib_int_counter(dd) - dd->z_int_counter; + if (int_counter == 0) { + if (!dd->f_intr_fallback(dd)) + dev_err(&dd->pcidev->dev, + "No interrupts detected, not usable.\n"); + else /* re-arm the timer to see if fallback works */ + mod_timer(&dd->intrchk_timer, jiffies + HZ/2); + } +} + +static void init_piobuf_state(struct qib_devdata *dd) +{ + int i, pidx; + u32 uctxts; + + /* + * Ensure all buffers are free, and fifos empty. Buffers + * are common, so only do once for port 0. + * + * After enable and qib_chg_pioavailkernel so we can safely + * enable pioavail updates and PIOENABLE. After this, packets + * are ready and able to go out. + */ + dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_ALL); + for (pidx = 0; pidx < dd->num_pports; ++pidx) + dd->f_sendctrl(dd->pport + pidx, QIB_SENDCTRL_FLUSH); + + /* + * If not all sendbufs are used, add the one to each of the lower + * numbered contexts. pbufsctxt and lastctxt_piobuf are + * calculated in chip-specific code because it may cause some + * chip-specific adjustments to be made. + */ + uctxts = dd->cfgctxts - dd->first_user_ctxt; + dd->ctxts_extrabuf = dd->pbufsctxt ? + dd->lastctxt_piobuf - (dd->pbufsctxt * uctxts) : 0; + + /* + * Set up the shadow copies of the piobufavail registers, + * which we compare against the chip registers for now, and + * the in memory DMA'ed copies of the registers. + * By now pioavail updates to memory should have occurred, so + * copy them into our working/shadow registers; this is in + * case something went wrong with abort, but mostly to get the + * initial values of the generation bit correct. + */ + for (i = 0; i < dd->pioavregs; i++) { + __le64 tmp; + + tmp = dd->pioavailregs_dma[i]; + /* + * Don't need to worry about pioavailkernel here + * because we will call qib_chg_pioavailkernel() later + * in initialization, to busy out buffers as needed. + */ + dd->pioavailshadow[i] = le64_to_cpu(tmp); + } + while (i < ARRAY_SIZE(dd->pioavailshadow)) + dd->pioavailshadow[i++] = 0; /* for debugging sanity */ + + /* after pioavailshadow is setup */ + qib_chg_pioavailkernel(dd, 0, dd->piobcnt2k + dd->piobcnt4k, + TXCHK_CHG_TYPE_KERN, NULL); + dd->f_initvl15_bufs(dd); +} + +/** + * qib_create_workqueues - create per port workqueues + * @dd: the qlogic_ib device + */ +static int qib_create_workqueues(struct qib_devdata *dd) +{ + int pidx; + struct qib_pportdata *ppd; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (!ppd->qib_wq) { + char wq_name[8]; /* 3 + 2 + 1 + 1 + 1 */ + + snprintf(wq_name, sizeof(wq_name), "qib%d_%d", + dd->unit, pidx); + ppd->qib_wq = alloc_ordered_workqueue(wq_name, + WQ_MEM_RECLAIM); + if (!ppd->qib_wq) + goto wq_error; + } + } + return 0; +wq_error: + pr_err("create_singlethread_workqueue failed for port %d\n", + pidx + 1); + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->qib_wq) { + destroy_workqueue(ppd->qib_wq); + ppd->qib_wq = NULL; + } + } + return -ENOMEM; +} + +static void qib_free_pportdata(struct qib_pportdata *ppd) +{ + free_percpu(ppd->ibport_data.pmastats); + free_percpu(ppd->ibport_data.rvp.rc_acks); + free_percpu(ppd->ibport_data.rvp.rc_qacks); + free_percpu(ppd->ibport_data.rvp.rc_delayed_comp); + ppd->ibport_data.pmastats = NULL; +} + +/** + * qib_init - do the actual initialization sequence on the chip + * @dd: the qlogic_ib device + * @reinit: reinitializing, so don't allocate new memory + * + * Do the actual initialization sequence on the chip. This is done + * both from the init routine called from the PCI infrastructure, and + * when we reset the chip, or detect that it was reset internally, + * or it's administratively re-enabled. + * + * Memory allocation here and in called routines is only done in + * the first case (reinit == 0). We have to be careful, because even + * without memory allocation, we need to re-write all the chip registers + * TIDs, etc. after the reset or enable has completed. + */ +int qib_init(struct qib_devdata *dd, int reinit) +{ + int ret = 0, pidx, lastfail = 0; + u32 portok = 0; + unsigned i; + struct qib_ctxtdata *rcd; + struct qib_pportdata *ppd; + unsigned long flags; + + /* Set linkstate to unknown, so we can watch for a transition. */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~(QIBL_LINKACTIVE | QIBL_LINKARMED | + QIBL_LINKDOWN | QIBL_LINKINIT | + QIBL_LINKV); + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } + + if (reinit) + ret = init_after_reset(dd); + else + ret = loadtime_init(dd); + if (ret) + goto done; + + /* Bypass most chip-init, to get to device creation */ + if (qib_mini_init) + return 0; + + ret = dd->f_late_initreg(dd); + if (ret) + goto done; + + /* dd->rcd can be NULL if early init failed */ + for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) { + /* + * Set up the (kernel) rcvhdr queue and egr TIDs. If doing + * re-init, the simplest way to handle this is to free + * existing, and re-allocate. + * Need to re-create rest of ctxt 0 ctxtdata as well. + */ + rcd = dd->rcd[i]; + if (!rcd) + continue; + + lastfail = qib_create_rcvhdrq(dd, rcd); + if (!lastfail) + lastfail = qib_setup_eagerbufs(rcd); + if (lastfail) + qib_dev_err(dd, + "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n"); + } + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + int mtu; + + if (lastfail) + ret = lastfail; + ppd = dd->pport + pidx; + mtu = ib_mtu_enum_to_int(qib_ibmtu); + if (mtu == -1) { + mtu = QIB_DEFAULT_MTU; + qib_ibmtu = 0; /* don't leave invalid value */ + } + /* set max we can ever have for this driver load */ + ppd->init_ibmaxlen = min(mtu > 2048 ? + dd->piosize4k : dd->piosize2k, + dd->rcvegrbufsize + + (dd->rcvhdrentsize << 2)); + /* + * Have to initialize ibmaxlen, but this will normally + * change immediately in qib_set_mtu(). + */ + ppd->ibmaxlen = ppd->init_ibmaxlen; + qib_set_mtu(ppd, mtu); + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_LINK_DISABLED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + + lastfail = dd->f_bringup_serdes(ppd); + if (lastfail) { + qib_devinfo(dd->pcidev, + "Failed to bringup IB port %u\n", ppd->port); + lastfail = -ENETDOWN; + continue; + } + + portok++; + } + + if (!portok) { + /* none of the ports initialized */ + if (!ret && lastfail) + ret = lastfail; + else if (!ret) + ret = -ENETDOWN; + /* but continue on, so we can debug cause */ + } + + enable_chip(dd); + + init_piobuf_state(dd); + +done: + if (!ret) { + /* chip is OK for user apps; mark it as initialized */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + /* + * Set status even if port serdes is not initialized + * so that diags will work. + */ + *ppd->statusp |= QIB_STATUS_CHIP_PRESENT | + QIB_STATUS_INITTED; + if (!ppd->link_speed_enabled) + continue; + if (dd->flags & QIB_HAS_SEND_DMA) + ret = qib_setup_sdma(ppd); + timer_setup(&ppd->hol_timer, qib_hol_event, 0); + ppd->hol_state = QIB_HOL_UP; + } + + /* now we can enable all interrupts from the chip */ + dd->f_set_intr_state(dd, 1); + + /* + * Setup to verify we get an interrupt, and fallback + * to an alternate if necessary and possible. + */ + mod_timer(&dd->intrchk_timer, jiffies + HZ/2); + /* start stats retrieval timer */ + mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); + } + + /* if ret is non-zero, we probably should do some cleanup here... */ + return ret; +} + +/* + * These next two routines are placeholders in case we don't have per-arch + * code for controlling write combining. If explicit control of write + * combining is not available, performance will probably be awful. + */ + +int __attribute__((weak)) qib_enable_wc(struct qib_devdata *dd) +{ + return -EOPNOTSUPP; +} + +void __attribute__((weak)) qib_disable_wc(struct qib_devdata *dd) +{ +} + +struct qib_devdata *qib_lookup(int unit) +{ + return xa_load(&qib_dev_table, unit); +} + +/* + * Stop the timers during unit shutdown, or after an error late + * in initialization. + */ +static void qib_stop_timers(struct qib_devdata *dd) +{ + struct qib_pportdata *ppd; + int pidx; + + if (dd->stats_timer.function) + del_timer_sync(&dd->stats_timer); + if (dd->intrchk_timer.function) + del_timer_sync(&dd->intrchk_timer); + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + if (ppd->hol_timer.function) + del_timer_sync(&ppd->hol_timer); + if (ppd->led_override_timer.function) { + del_timer_sync(&ppd->led_override_timer); + atomic_set(&ppd->led_override_timer_active, 0); + } + if (ppd->symerr_clear_timer.function) + del_timer_sync(&ppd->symerr_clear_timer); + } +} + +/** + * qib_shutdown_device - shut down a device + * @dd: the qlogic_ib device + * + * This is called to make the device quiet when we are about to + * unload the driver, and also when the device is administratively + * disabled. It does not free any data structures. + * Everything it does has to be setup again by qib_init(dd, 1) + */ +static void qib_shutdown_device(struct qib_devdata *dd) +{ + struct qib_pportdata *ppd; + unsigned pidx; + + if (dd->flags & QIB_SHUTDOWN) + return; + dd->flags |= QIB_SHUTDOWN; + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + + spin_lock_irq(&ppd->lflags_lock); + ppd->lflags &= ~(QIBL_LINKDOWN | QIBL_LINKINIT | + QIBL_LINKARMED | QIBL_LINKACTIVE | + QIBL_LINKV); + spin_unlock_irq(&ppd->lflags_lock); + *ppd->statusp &= ~(QIB_STATUS_IB_CONF | QIB_STATUS_IB_READY); + } + dd->flags &= ~QIB_INITTED; + + /* mask interrupts, but not errors */ + dd->f_set_intr_state(dd, 0); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + dd->f_rcvctrl(ppd, QIB_RCVCTRL_TAILUPD_DIS | + QIB_RCVCTRL_CTXT_DIS | + QIB_RCVCTRL_INTRAVAIL_DIS | + QIB_RCVCTRL_PKEY_ENB, -1); + /* + * Gracefully stop all sends allowing any in progress to + * trickle out first. + */ + dd->f_sendctrl(ppd, QIB_SENDCTRL_CLEAR); + } + + /* + * Enough for anything that's going to trickle out to have actually + * done so. + */ + udelay(20); + + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + ppd = dd->pport + pidx; + dd->f_setextled(ppd, 0); /* make sure LEDs are off */ + + if (dd->flags & QIB_HAS_SEND_DMA) + qib_teardown_sdma(ppd); + + dd->f_sendctrl(ppd, QIB_SENDCTRL_AVAIL_DIS | + QIB_SENDCTRL_SEND_DIS); + /* + * Clear SerdesEnable. + * We can't count on interrupts since we are stopping. + */ + dd->f_quiet_serdes(ppd); + + if (ppd->qib_wq) { + destroy_workqueue(ppd->qib_wq); + ppd->qib_wq = NULL; + } + qib_free_pportdata(ppd); + } + +} + +/** + * qib_free_ctxtdata - free a context's allocated data + * @dd: the qlogic_ib device + * @rcd: the ctxtdata structure + * + * free up any allocated data for a context + * This should not touch anything that would affect a simultaneous + * re-allocation of context data, because it is called after qib_mutex + * is released (and can be called from reinit as well). + * It should never change any chip state, or global driver state. + */ +void qib_free_ctxtdata(struct qib_devdata *dd, struct qib_ctxtdata *rcd) +{ + if (!rcd) + return; + + if (rcd->rcvhdrq) { + dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size, + rcd->rcvhdrq, rcd->rcvhdrq_phys); + rcd->rcvhdrq = NULL; + if (rcd->rcvhdrtail_kvaddr) { + dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, + rcd->rcvhdrtail_kvaddr, + rcd->rcvhdrqtailaddr_phys); + rcd->rcvhdrtail_kvaddr = NULL; + } + } + if (rcd->rcvegrbuf) { + unsigned e; + + for (e = 0; e < rcd->rcvegrbuf_chunks; e++) { + void *base = rcd->rcvegrbuf[e]; + size_t size = rcd->rcvegrbuf_size; + + dma_free_coherent(&dd->pcidev->dev, size, + base, rcd->rcvegrbuf_phys[e]); + } + kfree(rcd->rcvegrbuf); + rcd->rcvegrbuf = NULL; + kfree(rcd->rcvegrbuf_phys); + rcd->rcvegrbuf_phys = NULL; + rcd->rcvegrbuf_chunks = 0; + } + + kfree(rcd->tid_pg_list); + vfree(rcd->user_event_mask); + vfree(rcd->subctxt_uregbase); + vfree(rcd->subctxt_rcvegrbuf); + vfree(rcd->subctxt_rcvhdr_base); +#ifdef CONFIG_DEBUG_FS + kfree(rcd->opstats); + rcd->opstats = NULL; +#endif + kfree(rcd); +} + +/* + * Perform a PIO buffer bandwidth write test, to verify proper system + * configuration. Even when all the setup calls work, occasionally + * BIOS or other issues can prevent write combining from working, or + * can cause other bandwidth problems to the chip. + * + * This test simply writes the same buffer over and over again, and + * measures close to the peak bandwidth to the chip (not testing + * data bandwidth to the wire). On chips that use an address-based + * trigger to send packets to the wire, this is easy. On chips that + * use a count to trigger, we want to make sure that the packet doesn't + * go out on the wire, or trigger flow control checks. + */ +static void qib_verify_pioperf(struct qib_devdata *dd) +{ + u32 pbnum, cnt, lcnt; + u32 __iomem *piobuf; + u32 *addr; + u64 msecs, emsecs; + + piobuf = dd->f_getsendbuf(dd->pport, 0ULL, &pbnum); + if (!piobuf) { + qib_devinfo(dd->pcidev, + "No PIObufs for checking perf, skipping\n"); + return; + } + + /* + * Enough to give us a reasonable test, less than piobuf size, and + * likely multiple of store buffer length. + */ + cnt = 1024; + + addr = vmalloc(cnt); + if (!addr) + goto done; + + preempt_disable(); /* we want reasonably accurate elapsed time */ + msecs = 1 + jiffies_to_msecs(jiffies); + for (lcnt = 0; lcnt < 10000U; lcnt++) { + /* wait until we cross msec boundary */ + if (jiffies_to_msecs(jiffies) >= msecs) + break; + udelay(1); + } + + dd->f_set_armlaunch(dd, 0); + + /* + * length 0, no dwords actually sent + */ + writeq(0, piobuf); + qib_flush_wc(); + + /* + * This is only roughly accurate, since even with preempt we + * still take interrupts that could take a while. Running for + * >= 5 msec seems to get us "close enough" to accurate values. + */ + msecs = jiffies_to_msecs(jiffies); + for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) { + qib_pio_copy(piobuf + 64, addr, cnt >> 2); + emsecs = jiffies_to_msecs(jiffies) - msecs; + } + + /* 1 GiB/sec, slightly over IB SDR line rate */ + if (lcnt < (emsecs * 1024U)) + qib_dev_err(dd, + "Performance problem: bandwidth to PIO buffers is only %u MiB/sec\n", + lcnt / (u32) emsecs); + + preempt_enable(); + + vfree(addr); + +done: + /* disarm piobuf, so it's available again */ + dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbnum)); + qib_sendbuf_done(dd, pbnum); + dd->f_set_armlaunch(dd, 1); +} + +void qib_free_devdata(struct qib_devdata *dd) +{ + unsigned long flags; + + xa_lock_irqsave(&qib_dev_table, flags); + __xa_erase(&qib_dev_table, dd->unit); + xa_unlock_irqrestore(&qib_dev_table, flags); + +#ifdef CONFIG_DEBUG_FS + qib_dbg_ibdev_exit(&dd->verbs_dev); +#endif + free_percpu(dd->int_counter); + rvt_dealloc_device(&dd->verbs_dev.rdi); +} + +u64 qib_int_counter(struct qib_devdata *dd) +{ + int cpu; + u64 int_counter = 0; + + for_each_possible_cpu(cpu) + int_counter += *per_cpu_ptr(dd->int_counter, cpu); + return int_counter; +} + +u64 qib_sps_ints(void) +{ + unsigned long index, flags; + struct qib_devdata *dd; + u64 sps_ints = 0; + + xa_lock_irqsave(&qib_dev_table, flags); + xa_for_each(&qib_dev_table, index, dd) { + sps_ints += qib_int_counter(dd); + } + xa_unlock_irqrestore(&qib_dev_table, flags); + return sps_ints; +} + +/* + * Allocate our primary per-unit data structure. Must be done via verbs + * allocator, because the verbs cleanup process both does cleanup and + * free of the data structure. + * "extra" is for chip-specific data. + */ +struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra) +{ + struct qib_devdata *dd; + int ret, nports; + + /* extra is * number of ports */ + nports = extra / sizeof(struct qib_pportdata); + dd = (struct qib_devdata *)rvt_alloc_device(sizeof(*dd) + extra, + nports); + if (!dd) + return ERR_PTR(-ENOMEM); + + ret = xa_alloc_irq(&qib_dev_table, &dd->unit, dd, xa_limit_32b, + GFP_KERNEL); + if (ret < 0) { + qib_early_err(&pdev->dev, + "Could not allocate unit ID: error %d\n", -ret); + goto bail; + } + rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s%d", "qib", dd->unit); + + dd->int_counter = alloc_percpu(u64); + if (!dd->int_counter) { + ret = -ENOMEM; + qib_early_err(&pdev->dev, + "Could not allocate per-cpu int_counter\n"); + goto bail; + } + + if (!qib_cpulist_count) { + u32 count = num_online_cpus(); + + qib_cpulist = bitmap_zalloc(count, GFP_KERNEL); + if (qib_cpulist) + qib_cpulist_count = count; + } +#ifdef CONFIG_DEBUG_FS + qib_dbg_ibdev_init(&dd->verbs_dev); +#endif + return dd; +bail: + if (!list_empty(&dd->list)) + list_del_init(&dd->list); + rvt_dealloc_device(&dd->verbs_dev.rdi); + return ERR_PTR(ret); +} + +/* + * Called from freeze mode handlers, and from PCI error + * reporting code. Should be paranoid about state of + * system and data structures. + */ +void qib_disable_after_error(struct qib_devdata *dd) +{ + if (dd->flags & QIB_INITTED) { + u32 pidx; + + dd->flags &= ~QIB_INITTED; + if (dd->pport) + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + struct qib_pportdata *ppd; + + ppd = dd->pport + pidx; + if (dd->flags & QIB_PRESENT) { + qib_set_linkstate(ppd, + QIB_IB_LINKDOWN_DISABLE); + dd->f_setextled(ppd, 0); + } + *ppd->statusp &= ~QIB_STATUS_IB_READY; + } + } + + /* + * Mark as having had an error for driver, and also + * for /sys and status word mapped to user programs. + * This marks unit as not usable, until reset. + */ + if (dd->devstatusp) + *dd->devstatusp |= QIB_STATUS_HWERROR; +} + +static void qib_remove_one(struct pci_dev *); +static int qib_init_one(struct pci_dev *, const struct pci_device_id *); +static void qib_shutdown_one(struct pci_dev *); + +#define DRIVER_LOAD_MSG "Intel " QIB_DRV_NAME " loaded: " +#define PFX QIB_DRV_NAME ": " + +static const struct pci_device_id qib_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_QLOGIC_IB_6120) }, + { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7220) }, + { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7322) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, qib_pci_tbl); + +static struct pci_driver qib_driver = { + .name = QIB_DRV_NAME, + .probe = qib_init_one, + .remove = qib_remove_one, + .shutdown = qib_shutdown_one, + .id_table = qib_pci_tbl, + .err_handler = &qib_pci_err_handler, +}; + +#ifdef CONFIG_INFINIBAND_QIB_DCA + +static int qib_notify_dca(struct notifier_block *, unsigned long, void *); +static struct notifier_block dca_notifier = { + .notifier_call = qib_notify_dca, + .next = NULL, + .priority = 0 +}; + +static int qib_notify_dca_device(struct device *device, void *data) +{ + struct qib_devdata *dd = dev_get_drvdata(device); + unsigned long event = *(unsigned long *)data; + + return dd->f_notify_dca(dd, event); +} + +static int qib_notify_dca(struct notifier_block *nb, unsigned long event, + void *p) +{ + int rval; + + rval = driver_for_each_device(&qib_driver.driver, NULL, + &event, qib_notify_dca_device); + return rval ? NOTIFY_BAD : NOTIFY_DONE; +} + +#endif + +/* + * Do all the generic driver unit- and chip-independent memory + * allocation and initialization. + */ +static int __init qib_ib_init(void) +{ + int ret; + + ret = qib_dev_init(); + if (ret) + goto bail; + + /* + * These must be called before the driver is registered with + * the PCI subsystem. + */ +#ifdef CONFIG_INFINIBAND_QIB_DCA + dca_register_notify(&dca_notifier); +#endif +#ifdef CONFIG_DEBUG_FS + qib_dbg_init(); +#endif + ret = pci_register_driver(&qib_driver); + if (ret < 0) { + pr_err("Unable to register driver: error %d\n", -ret); + goto bail_dev; + } + + /* not fatal if it doesn't work */ + if (qib_init_qibfs()) + pr_err("Unable to register ipathfs\n"); + goto bail; /* all OK */ + +bail_dev: +#ifdef CONFIG_INFINIBAND_QIB_DCA + dca_unregister_notify(&dca_notifier); +#endif +#ifdef CONFIG_DEBUG_FS + qib_dbg_exit(); +#endif + qib_dev_cleanup(); +bail: + return ret; +} + +module_init(qib_ib_init); + +/* + * Do the non-unit driver cleanup, memory free, etc. at unload. + */ +static void __exit qib_ib_cleanup(void) +{ + int ret; + + ret = qib_exit_qibfs(); + if (ret) + pr_err( + "Unable to cleanup counter filesystem: error %d\n", + -ret); + +#ifdef CONFIG_INFINIBAND_QIB_DCA + dca_unregister_notify(&dca_notifier); +#endif + pci_unregister_driver(&qib_driver); +#ifdef CONFIG_DEBUG_FS + qib_dbg_exit(); +#endif + + qib_cpulist_count = 0; + bitmap_free(qib_cpulist); + + WARN_ON(!xa_empty(&qib_dev_table)); + qib_dev_cleanup(); +} + +module_exit(qib_ib_cleanup); + +/* this can only be called after a successful initialization */ +static void cleanup_device_data(struct qib_devdata *dd) +{ + int ctxt; + int pidx; + struct qib_ctxtdata **tmp; + unsigned long flags; + + /* users can't do anything more with chip */ + for (pidx = 0; pidx < dd->num_pports; ++pidx) { + if (dd->pport[pidx].statusp) + *dd->pport[pidx].statusp &= ~QIB_STATUS_CHIP_PRESENT; + + spin_lock(&dd->pport[pidx].cc_shadow_lock); + + kfree(dd->pport[pidx].congestion_entries); + dd->pport[pidx].congestion_entries = NULL; + kfree(dd->pport[pidx].ccti_entries); + dd->pport[pidx].ccti_entries = NULL; + kfree(dd->pport[pidx].ccti_entries_shadow); + dd->pport[pidx].ccti_entries_shadow = NULL; + kfree(dd->pport[pidx].congestion_entries_shadow); + dd->pport[pidx].congestion_entries_shadow = NULL; + + spin_unlock(&dd->pport[pidx].cc_shadow_lock); + } + + qib_disable_wc(dd); + + if (dd->pioavailregs_dma) { + dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, + (void *) dd->pioavailregs_dma, + dd->pioavailregs_phys); + dd->pioavailregs_dma = NULL; + } + + if (dd->pageshadow) { + struct page **tmpp = dd->pageshadow; + dma_addr_t *tmpd = dd->physshadow; + int i; + + for (ctxt = 0; ctxt < dd->cfgctxts; ctxt++) { + int ctxt_tidbase = ctxt * dd->rcvtidcnt; + int maxtid = ctxt_tidbase + dd->rcvtidcnt; + + for (i = ctxt_tidbase; i < maxtid; i++) { + if (!tmpp[i]) + continue; + dma_unmap_page(&dd->pcidev->dev, tmpd[i], + PAGE_SIZE, DMA_FROM_DEVICE); + qib_release_user_pages(&tmpp[i], 1); + tmpp[i] = NULL; + } + } + + dd->pageshadow = NULL; + vfree(tmpp); + dd->physshadow = NULL; + vfree(tmpd); + } + + /* + * Free any resources still in use (usually just kernel contexts) + * at unload; we do for ctxtcnt, because that's what we allocate. + * We acquire lock to be really paranoid that rcd isn't being + * accessed from some interrupt-related code (that should not happen, + * but best to be sure). + */ + spin_lock_irqsave(&dd->uctxt_lock, flags); + tmp = dd->rcd; + dd->rcd = NULL; + spin_unlock_irqrestore(&dd->uctxt_lock, flags); + for (ctxt = 0; tmp && ctxt < dd->ctxtcnt; ctxt++) { + struct qib_ctxtdata *rcd = tmp[ctxt]; + + tmp[ctxt] = NULL; /* debugging paranoia */ + qib_free_ctxtdata(dd, rcd); + } + kfree(tmp); +} + +/* + * Clean up on unit shutdown, or error during unit load after + * successful initialization. + */ +static void qib_postinit_cleanup(struct qib_devdata *dd) +{ + /* + * Clean up chip-specific stuff. + * We check for NULL here, because it's outside + * the kregbase check, and we need to call it + * after the free_irq. Thus it's possible that + * the function pointers were never initialized. + */ + if (dd->f_cleanup) + dd->f_cleanup(dd); + + qib_pcie_ddcleanup(dd); + + cleanup_device_data(dd); + + qib_free_devdata(dd); +} + +static int qib_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret, j, pidx, initfail; + struct qib_devdata *dd = NULL; + + ret = qib_pcie_init(pdev, ent); + if (ret) + goto bail; + + /* + * Do device-specific initialiation, function table setup, dd + * allocation, etc. + */ + switch (ent->device) { + case PCI_DEVICE_ID_QLOGIC_IB_6120: +#ifdef CONFIG_PCI_MSI + dd = qib_init_iba6120_funcs(pdev, ent); +#else + qib_early_err(&pdev->dev, + "Intel PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n", + ent->device); + dd = ERR_PTR(-ENODEV); +#endif + break; + + case PCI_DEVICE_ID_QLOGIC_IB_7220: + dd = qib_init_iba7220_funcs(pdev, ent); + break; + + case PCI_DEVICE_ID_QLOGIC_IB_7322: + dd = qib_init_iba7322_funcs(pdev, ent); + break; + + default: + qib_early_err(&pdev->dev, + "Failing on unknown Intel deviceid 0x%x\n", + ent->device); + ret = -ENODEV; + } + + if (IS_ERR(dd)) + ret = PTR_ERR(dd); + if (ret) + goto bail; /* error already printed */ + + ret = qib_create_workqueues(dd); + if (ret) + goto bail; + + /* do the generic initialization */ + initfail = qib_init(dd, 0); + + ret = qib_register_ib_device(dd); + + /* + * Now ready for use. this should be cleared whenever we + * detect a reset, or initiate one. If earlier failure, + * we still create devices, so diags, etc. can be used + * to determine cause of problem. + */ + if (!qib_mini_init && !initfail && !ret) + dd->flags |= QIB_INITTED; + + j = qib_device_create(dd); + if (j) + qib_dev_err(dd, "Failed to create /dev devices: %d\n", -j); + j = qibfs_add(dd); + if (j) + qib_dev_err(dd, "Failed filesystem setup for counters: %d\n", + -j); + + if (qib_mini_init || initfail || ret) { + qib_stop_timers(dd); + flush_workqueue(ib_wq); + for (pidx = 0; pidx < dd->num_pports; ++pidx) + dd->f_quiet_serdes(dd->pport + pidx); + if (qib_mini_init) + goto bail; + if (!j) { + (void) qibfs_remove(dd); + qib_device_remove(dd); + } + if (!ret) + qib_unregister_ib_device(dd); + qib_postinit_cleanup(dd); + if (initfail) + ret = initfail; + goto bail; + } + + ret = qib_enable_wc(dd); + if (ret) { + qib_dev_err(dd, + "Write combining not enabled (err %d): performance may be poor\n", + -ret); + ret = 0; + } + + qib_verify_pioperf(dd); +bail: + return ret; +} + +static void qib_remove_one(struct pci_dev *pdev) +{ + struct qib_devdata *dd = pci_get_drvdata(pdev); + int ret; + + /* unregister from IB core */ + qib_unregister_ib_device(dd); + + /* + * Disable the IB link, disable interrupts on the device, + * clear dma engines, etc. + */ + if (!qib_mini_init) + qib_shutdown_device(dd); + + qib_stop_timers(dd); + + /* wait until all of our (qsfp) queue_work() calls complete */ + flush_workqueue(ib_wq); + + ret = qibfs_remove(dd); + if (ret) + qib_dev_err(dd, "Failed counters filesystem cleanup: %d\n", + -ret); + + qib_device_remove(dd); + + qib_postinit_cleanup(dd); +} + +static void qib_shutdown_one(struct pci_dev *pdev) +{ + struct qib_devdata *dd = pci_get_drvdata(pdev); + + qib_shutdown_device(dd); +} + +/** + * qib_create_rcvhdrq - create a receive header queue + * @dd: the qlogic_ib device + * @rcd: the context data + * + * This must be contiguous memory (from an i/o perspective), and must be + * DMA'able (which means for some systems, it will go through an IOMMU, + * or be forced into a low address range). + */ +int qib_create_rcvhdrq(struct qib_devdata *dd, struct qib_ctxtdata *rcd) +{ + unsigned amt; + int old_node_id; + + if (!rcd->rcvhdrq) { + dma_addr_t phys_hdrqtail; + gfp_t gfp_flags; + + amt = ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize * + sizeof(u32), PAGE_SIZE); + gfp_flags = (rcd->ctxt >= dd->first_user_ctxt) ? + GFP_USER : GFP_KERNEL; + + old_node_id = dev_to_node(&dd->pcidev->dev); + set_dev_node(&dd->pcidev->dev, rcd->node_id); + rcd->rcvhdrq = dma_alloc_coherent( + &dd->pcidev->dev, amt, &rcd->rcvhdrq_phys, + gfp_flags | __GFP_COMP); + set_dev_node(&dd->pcidev->dev, old_node_id); + + if (!rcd->rcvhdrq) { + qib_dev_err(dd, + "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n", + amt, rcd->ctxt); + goto bail; + } + + if (rcd->ctxt >= dd->first_user_ctxt) { + rcd->user_event_mask = vmalloc_user(PAGE_SIZE); + if (!rcd->user_event_mask) + goto bail_free_hdrq; + } + + if (!(dd->flags & QIB_NODMA_RTAIL)) { + set_dev_node(&dd->pcidev->dev, rcd->node_id); + rcd->rcvhdrtail_kvaddr = dma_alloc_coherent( + &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, + gfp_flags); + set_dev_node(&dd->pcidev->dev, old_node_id); + if (!rcd->rcvhdrtail_kvaddr) + goto bail_free; + rcd->rcvhdrqtailaddr_phys = phys_hdrqtail; + } + + rcd->rcvhdrq_size = amt; + } + + /* clear for security and sanity on each use */ + memset(rcd->rcvhdrq, 0, rcd->rcvhdrq_size); + if (rcd->rcvhdrtail_kvaddr) + memset(rcd->rcvhdrtail_kvaddr, 0, PAGE_SIZE); + return 0; + +bail_free: + qib_dev_err(dd, + "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n", + rcd->ctxt); + vfree(rcd->user_event_mask); + rcd->user_event_mask = NULL; +bail_free_hdrq: + dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq, + rcd->rcvhdrq_phys); + rcd->rcvhdrq = NULL; +bail: + return -ENOMEM; +} + +/** + * qib_setup_eagerbufs - allocate eager buffers, both kernel and user contexts. + * @rcd: the context we are setting up. + * + * Allocate the eager TID buffers and program them into hip. + * They are no longer completely contiguous, we do multiple allocation + * calls. Otherwise we get the OOM code involved, by asking for too + * much per call, with disastrous results on some kernels. + */ +int qib_setup_eagerbufs(struct qib_ctxtdata *rcd) +{ + struct qib_devdata *dd = rcd->dd; + unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff; + size_t size; + gfp_t gfp_flags; + int old_node_id; + + /* + * GFP_USER, but without GFP_FS, so buffer cache can be + * coalesced (we hope); otherwise, even at order 4, + * heavy filesystem activity makes these fail, and we can + * use compound pages. + */ + gfp_flags = __GFP_RECLAIM | __GFP_IO | __GFP_COMP; + + egrcnt = rcd->rcvegrcnt; + egroff = rcd->rcvegr_tid_base; + egrsize = dd->rcvegrbufsize; + + chunk = rcd->rcvegrbuf_chunks; + egrperchunk = rcd->rcvegrbufs_perchunk; + size = rcd->rcvegrbuf_size; + if (!rcd->rcvegrbuf) { + rcd->rcvegrbuf = + kcalloc_node(chunk, sizeof(rcd->rcvegrbuf[0]), + GFP_KERNEL, rcd->node_id); + if (!rcd->rcvegrbuf) + goto bail; + } + if (!rcd->rcvegrbuf_phys) { + rcd->rcvegrbuf_phys = + kmalloc_array_node(chunk, + sizeof(rcd->rcvegrbuf_phys[0]), + GFP_KERNEL, rcd->node_id); + if (!rcd->rcvegrbuf_phys) + goto bail_rcvegrbuf; + } + for (e = 0; e < rcd->rcvegrbuf_chunks; e++) { + if (rcd->rcvegrbuf[e]) + continue; + + old_node_id = dev_to_node(&dd->pcidev->dev); + set_dev_node(&dd->pcidev->dev, rcd->node_id); + rcd->rcvegrbuf[e] = + dma_alloc_coherent(&dd->pcidev->dev, size, + &rcd->rcvegrbuf_phys[e], + gfp_flags); + set_dev_node(&dd->pcidev->dev, old_node_id); + if (!rcd->rcvegrbuf[e]) + goto bail_rcvegrbuf_phys; + } + + rcd->rcvegr_phys = rcd->rcvegrbuf_phys[0]; + + for (e = chunk = 0; chunk < rcd->rcvegrbuf_chunks; chunk++) { + dma_addr_t pa = rcd->rcvegrbuf_phys[chunk]; + unsigned i; + + /* clear for security and sanity on each use */ + memset(rcd->rcvegrbuf[chunk], 0, size); + + for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) { + dd->f_put_tid(dd, e + egroff + + (u64 __iomem *) + ((char __iomem *) + dd->kregbase + + dd->rcvegrbase), + RCVHQ_RCV_TYPE_EAGER, pa); + pa += egrsize; + } + cond_resched(); /* don't hog the cpu */ + } + + return 0; + +bail_rcvegrbuf_phys: + for (e = 0; e < rcd->rcvegrbuf_chunks && rcd->rcvegrbuf[e]; e++) + dma_free_coherent(&dd->pcidev->dev, size, + rcd->rcvegrbuf[e], rcd->rcvegrbuf_phys[e]); + kfree(rcd->rcvegrbuf_phys); + rcd->rcvegrbuf_phys = NULL; +bail_rcvegrbuf: + kfree(rcd->rcvegrbuf); + rcd->rcvegrbuf = NULL; +bail: + return -ENOMEM; +} + +/* + * Note: Changes to this routine should be mirrored + * for the diagnostics routine qib_remap_ioaddr32(). + * There is also related code for VL15 buffers in qib_init_7322_variables(). + * The teardown code that unmaps is in qib_pcie_ddcleanup() + */ +int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen) +{ + u64 __iomem *qib_kregbase = NULL; + void __iomem *qib_piobase = NULL; + u64 __iomem *qib_userbase = NULL; + u64 qib_kreglen; + u64 qib_pio2koffset = dd->piobufbase & 0xffffffff; + u64 qib_pio4koffset = dd->piobufbase >> 32; + u64 qib_pio2klen = dd->piobcnt2k * dd->palign; + u64 qib_pio4klen = dd->piobcnt4k * dd->align4k; + u64 qib_physaddr = dd->physaddr; + u64 qib_piolen; + u64 qib_userlen = 0; + + /* + * Free the old mapping because the kernel will try to reuse the + * old mapping and not create a new mapping with the + * write combining attribute. + */ + iounmap(dd->kregbase); + dd->kregbase = NULL; + + /* + * Assumes chip address space looks like: + * - kregs + sregs + cregs + uregs (in any order) + * - piobufs (2K and 4K bufs in either order) + * or: + * - kregs + sregs + cregs (in any order) + * - piobufs (2K and 4K bufs in either order) + * - uregs + */ + if (dd->piobcnt4k == 0) { + qib_kreglen = qib_pio2koffset; + qib_piolen = qib_pio2klen; + } else if (qib_pio2koffset < qib_pio4koffset) { + qib_kreglen = qib_pio2koffset; + qib_piolen = qib_pio4koffset + qib_pio4klen - qib_kreglen; + } else { + qib_kreglen = qib_pio4koffset; + qib_piolen = qib_pio2koffset + qib_pio2klen - qib_kreglen; + } + qib_piolen += vl15buflen; + /* Map just the configured ports (not all hw ports) */ + if (dd->uregbase > qib_kreglen) + qib_userlen = dd->ureg_align * dd->cfgctxts; + + /* Sanity checks passed, now create the new mappings */ + qib_kregbase = ioremap(qib_physaddr, qib_kreglen); + if (!qib_kregbase) + goto bail; + + qib_piobase = ioremap_wc(qib_physaddr + qib_kreglen, qib_piolen); + if (!qib_piobase) + goto bail_kregbase; + + if (qib_userlen) { + qib_userbase = ioremap(qib_physaddr + dd->uregbase, + qib_userlen); + if (!qib_userbase) + goto bail_piobase; + } + + dd->kregbase = qib_kregbase; + dd->kregend = (u64 __iomem *) + ((char __iomem *) qib_kregbase + qib_kreglen); + dd->piobase = qib_piobase; + dd->pio2kbase = (void __iomem *) + (((char __iomem *) dd->piobase) + + qib_pio2koffset - qib_kreglen); + if (dd->piobcnt4k) + dd->pio4kbase = (void __iomem *) + (((char __iomem *) dd->piobase) + + qib_pio4koffset - qib_kreglen); + if (qib_userlen) + /* ureg will now be accessed relative to dd->userbase */ + dd->userbase = qib_userbase; + return 0; + +bail_piobase: + iounmap(qib_piobase); +bail_kregbase: + iounmap(qib_kregbase); +bail: + return -ENOMEM; +} |