diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/input/misc/Kconfig | 932 |
1 files changed, 932 insertions, 0 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig new file mode 100644 index 000000000..fa9426516 --- /dev/null +++ b/drivers/input/misc/Kconfig @@ -0,0 +1,932 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Input misc drivers configuration +# +menuconfig INPUT_MISC + bool "Miscellaneous devices" + help + Say Y here, and a list of miscellaneous input drivers will be displayed. + Everything that didn't fit into the other categories is here. This option + doesn't affect the kernel. + + If unsure, say Y. + +if INPUT_MISC + +config INPUT_88PM860X_ONKEY + tristate "88PM860x ONKEY support" + depends on MFD_88PM860X + help + Support the ONKEY of Marvell 88PM860x PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called 88pm860x_onkey. + +config INPUT_88PM80X_ONKEY + tristate "88PM80x ONKEY support" + depends on MFD_88PM800 + help + Support the ONKEY of Marvell 88PM80x PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called 88pm80x_onkey. + +config INPUT_AB8500_PONKEY + tristate "AB8500 Pon (PowerOn) Key" + depends on AB8500_CORE + help + Say Y here to use the PowerOn Key for ST-Ericsson's AB8500 + Mix-Sig PMIC. + + To compile this driver as a module, choose M here: the module + will be called ab8500-ponkey. + +config INPUT_AD714X + tristate "Analog Devices AD714x Capacitance Touch Sensor" + help + Say Y here if you want to support an AD7142/3/7/8/7A touch sensor. + + You should select a bus connection too. + + To compile this driver as a module, choose M here: the + module will be called ad714x. + +config INPUT_AD714X_I2C + tristate "support I2C bus connection" + depends on INPUT_AD714X && I2C + default y + help + Say Y here if you have AD7142/AD7147 hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad714x-i2c. + +config INPUT_AD714X_SPI + tristate "support SPI bus connection" + depends on INPUT_AD714X && SPI + default y + help + Say Y here if you have AD7142/AD7147 hooked to a SPI bus. + + To compile this driver as a module, choose M here: the + module will be called ad714x-spi. + +config INPUT_ARIEL_PWRBUTTON + tristate "Dell Wyse 3020 Power Button Driver" + depends on SPI + depends on MACH_MMP3_DT || COMPILE_TEST + help + Say Y to enable support for reporting power button status on + on Dell Wyse 3020 ("Ariel") thin client. + + To compile this driver as a module, choose M here: the module + will be called ariel-pwrbutton. + +config INPUT_ARIZONA_HAPTICS + tristate "Arizona haptics support" + depends on MFD_ARIZONA && SND_SOC + select INPUT_FF_MEMLESS + help + Say Y to enable support for the haptics module in Arizona CODECs. + + To compile this driver as a module, choose M here: the + module will be called arizona-haptics. + +config INPUT_ATC260X_ONKEY + tristate "Actions Semi ATC260x PMIC ONKEY" + depends on MFD_ATC260X + help + Support the ONKEY of ATC260x PMICs as an input device reporting + power button status. ONKEY can be used to wakeup from low power + modes and force a reset on long press. + + To compile this driver as a module, choose M here: the + module will be called atc260x-onkey. + +config INPUT_ATMEL_CAPTOUCH + tristate "Atmel Capacitive Touch Button Driver" + depends on OF || COMPILE_TEST + depends on I2C + help + Say Y here if an Atmel Capacitive Touch Button device which + implements "captouch" protocol is connected to I2C bus. Typically + this device consists of Atmel Touch sensor controlled by AtMegaXX + MCU running firmware based on Qtouch library. + One should find "atmel,captouch" node in the board specific DTS. + + To compile this driver as a module, choose M here: the + module will be called atmel_captouch. + +config INPUT_BMA150 + tristate "BMA150/SMB380 acceleration sensor support" + depends on I2C + help + Say Y here if you have Bosch Sensortec's BMA150 or SMB380 + acceleration sensor hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called bma150. + +config INPUT_E3X0_BUTTON + tristate "NI Ettus Research USRP E3xx Button support." + default n + help + Say Y here to enable support for the NI Ettus Research + USRP E3xx Button. + + To compile this driver as a module, choose M here: the + module will be called e3x0_button. + +config INPUT_PCSPKR + tristate "PC Speaker support" + depends on PCSPKR_PLATFORM + help + Say Y here if you want the standard PC Speaker to be used for + bells and whistles. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called pcspkr. + +config INPUT_PM8941_PWRKEY + tristate "Qualcomm PM8941 power key support" + depends on MFD_SPMI_PMIC + help + Say Y here if you want support for the power key usually found + on boards using a Qualcomm PM8941 compatible PMIC. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the module + will be called pm8941-pwrkey. + +config INPUT_PM8XXX_VIBRATOR + tristate "Qualcomm PM8XXX vibrator support" + depends on MFD_PM8XXX || MFD_SPMI_PMIC + select INPUT_FF_MEMLESS + help + This option enables device driver support for the vibrator + on Qualcomm PM8xxx chip. This driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called pm8xxx-vibrator. + +config INPUT_PMIC8XXX_PWRKEY + tristate "PMIC8XXX power key support" + depends on MFD_PM8XXX + help + Say Y here if you want support for the PMIC8XXX power key. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called pmic8xxx-pwrkey. + +config INPUT_SPARCSPKR + tristate "SPARC Speaker support" + depends on PCI && SPARC64 + help + Say Y here if you want the standard Speaker on Sparc PCI systems + to be used for bells and whistles. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called sparcspkr. + +config INPUT_M68K_BEEP + tristate "M68k Beeper support" + depends on M68K + +config INPUT_MAX77650_ONKEY + tristate "Maxim MAX77650 ONKEY support" + depends on MFD_MAX77650 + help + Support the ONKEY of the MAX77650 PMIC as an input device. + + To compile this driver as a module, choose M here: the module + will be called max77650-onkey. + +config INPUT_MAX77693_HAPTIC + tristate "MAXIM MAX77693/MAX77843 haptic controller support" + depends on (MFD_MAX77693 || MFD_MAX77843) && PWM + select INPUT_FF_MEMLESS + help + This option enables support for the haptic controller on + MAXIM MAX77693 and MAX77843 chips. + + To compile this driver as module, choose M here: the + module will be called max77693-haptic. + +config INPUT_MAX8925_ONKEY + tristate "MAX8925 ONKEY support" + depends on MFD_MAX8925 + help + Support the ONKEY of MAX8925 PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called max8925_onkey. + +config INPUT_MAX8997_HAPTIC + tristate "MAXIM MAX8997 haptic controller support" + depends on PWM && MFD_MAX8997 + select INPUT_FF_MEMLESS + help + This option enables device driver support for the haptic controller + on MAXIM MAX8997 chip. This driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called max8997-haptic. + +config INPUT_MC13783_PWRBUTTON + tristate "MC13783 ON buttons" + depends on MFD_MC13XXX + help + Support the ON buttons of MC13783 PMIC as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called mc13783-pwrbutton. + +config INPUT_MMA8450 + tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer" + depends on I2C + help + Say Y here if you want to support Freescale's MMA8450 Accelerometer + through I2C interface. + + To compile this driver as a module, choose M here: the + module will be called mma8450. + +config INPUT_APANEL + tristate "Fujitsu Lifebook Application Panel buttons" + depends on X86 && I2C && LEDS_CLASS + select CHECK_SIGNATURE + help + Say Y here for support of the Application Panel buttons, used on + Fujitsu Lifebook. These are attached to the mainboard through + an SMBus interface managed by the I2C Intel ICH (i801) driver, + which you should also build for this kernel. + + To compile this driver as a module, choose M here: the module will + be called apanel. + +config INPUT_GPIO_BEEPER + tristate "Generic GPIO Beeper support" + depends on GPIOLIB || COMPILE_TEST + help + Say Y here if you have a beeper connected to a GPIO pin. + + To compile this driver as a module, choose M here: the + module will be called gpio-beeper. + +config INPUT_GPIO_DECODER + tristate "Polled GPIO Decoder Input driver" + depends on GPIOLIB || COMPILE_TEST + help + Say Y here if you want driver to read status of multiple GPIO + lines and report the encoded value as an absolute integer to + input subsystem. + + To compile this driver as a module, choose M here: the module + will be called gpio_decoder. + +config INPUT_GPIO_VIBRA + tristate "GPIO vibrator support" + depends on GPIOLIB || COMPILE_TEST + select INPUT_FF_MEMLESS + help + Say Y here to get support for GPIO based vibrator devices. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module will be + called gpio-vibra. + +config INPUT_COBALT_BTNS + tristate "Cobalt button interface" + depends on MIPS_COBALT + help + Say Y here if you want to support MIPS Cobalt button interface. + + To compile this driver as a module, choose M here: the + module will be called cobalt_btns. + +config INPUT_CPCAP_PWRBUTTON + tristate "CPCAP OnKey" + depends on MFD_CPCAP + help + Say Y here if you want to enable power key reporting via the + Motorola CPCAP chip. + + To compile this driver as a module, choose M here. The module will + be called cpcap-pwrbutton. + +config INPUT_WISTRON_BTNS + tristate "x86 Wistron laptop button interface" + depends on X86_32 && !UML + select INPUT_SPARSEKMAP + select NEW_LEDS + select LEDS_CLASS + select CHECK_SIGNATURE + help + Say Y here for support of Wistron laptop button interfaces, used on + laptops of various brands, including Acer and Fujitsu-Siemens. If + available, mail and wifi LEDs will be controllable via /sys/class/leds. + + To compile this driver as a module, choose M here: the module will + be called wistron_btns. + +config INPUT_ATLAS_BTNS + tristate "x86 Atlas button interface" + depends on X86 && ACPI + help + Say Y here for support of Atlas wallmount touchscreen buttons. + The events will show up as scancodes F1 through F9 via evdev. + + To compile this driver as a module, choose M here: the module will + be called atlas_btns. + +config INPUT_ATI_REMOTE2 + tristate "ATI / Philips USB RF remote control" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use an ATI or Philips USB RF remote control. + These are RF remotes with USB receivers. + ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards + and is also available as a separate product. + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote2. + +config INPUT_KEYSPAN_REMOTE + tristate "Keyspan DMR USB remote control" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use a Keyspan DMR USB remote control. + Currently only the UIA-11 type of receiver has been tested. The tag + on the receiver that connects to the USB port should have a P/N that + will tell you what type of DMR you have. The UIA-10 type is not + supported at this time. This driver maps all buttons to keypress + events. + + To compile this driver as a module, choose M here: the module will + be called keyspan_remote. + +config INPUT_KXTJ9 + tristate "Kionix KXTJ9 tri-axis digital accelerometer" + depends on I2C + help + Say Y here to enable support for the Kionix KXTJ9 digital tri-axis + accelerometer. + + To compile this driver as a module, choose M here: the module will + be called kxtj9. + +config INPUT_POWERMATE + tristate "Griffin PowerMate and Contour Jog support" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use Griffin PowerMate or Contour Jog devices. + These are aluminum dials which can measure clockwise and anticlockwise + rotation. The dial also acts as a pushbutton. The base contains an LED + which can be instructed to pulse or to switch to a particular intensity. + + You can download userspace tools from + <http://sowerbutts.com/powermate/>. + + To compile this driver as a module, choose M here: the + module will be called powermate. + +config INPUT_YEALINK + tristate "Yealink usb-p1k voip phone" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to enable keyboard and LCD functions of the + Yealink usb-p1k usb phones. The audio part is enabled by the generic + usb sound driver, so you might want to enable that as well. + + For information about how to use these additional functions, see + <file:Documentation/input/devices/yealink.rst>. + + To compile this driver as a module, choose M here: the module will be + called yealink. + +config INPUT_CM109 + tristate "C-Media CM109 USB I/O Controller" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to enable keyboard and buzzer functions of the + C-Media CM109 usb phones. The audio part is enabled by the generic + usb sound driver, so you might want to enable that as well. + + To compile this driver as a module, choose M here: the module will be + called cm109. + +config INPUT_REGULATOR_HAPTIC + tristate "Regulator haptics support" + depends on REGULATOR + select INPUT_FF_MEMLESS + help + This option enables device driver support for the haptic controlled + by a regulator. This driver supports ff-memless interface + from input framework. + + To compile this driver as a module, choose M here: the + module will be called regulator-haptic. + +config INPUT_RETU_PWRBUTTON + tristate "Retu Power button Driver" + depends on MFD_RETU + help + Say Y here if you want to enable power key reporting via the + Retu chips found in Nokia Internet Tablets (770, N800, N810). + + To compile this driver as a module, choose M here. The module will + be called retu-pwrbutton. + +config INPUT_TPS65218_PWRBUTTON + tristate "TPS65218 Power button driver" + depends on (MFD_TPS65217 || MFD_TPS65218) + help + Say Y here if you want to enable power button reporting for + TPS65217 and TPS65218 Power Management IC devices. + + To compile this driver as a module, choose M here. The module will + be called tps65218-pwrbutton. + +config INPUT_AXP20X_PEK + tristate "X-Powers AXP20X power button driver" + depends on MFD_AXP20X + help + Say Y here if you want to enable power key reporting via the + AXP20X PMIC. + + To compile this driver as a module, choose M here. The module will + be called axp20x-pek. + + +config INPUT_TWL4030_PWRBUTTON + tristate "TWL4030 Power button Driver" + depends on TWL4030_CORE + help + Say Y here if you want to enable power key reporting via the + TWL4030 family of chips. + + To compile this driver as a module, choose M here. The module will + be called twl4030_pwrbutton. + +config INPUT_TWL4030_VIBRA + tristate "Support for TWL4030 Vibrator" + depends on TWL4030_CORE + select MFD_TWL4030_AUDIO + select INPUT_FF_MEMLESS + help + This option enables support for TWL4030 Vibrator Driver. + + To compile this driver as a module, choose M here. The module will + be called twl4030_vibra. + +config INPUT_TWL6040_VIBRA + tristate "Support for TWL6040 Vibrator" + depends on TWL6040_CORE + select INPUT_FF_MEMLESS + help + This option enables support for TWL6040 Vibrator Driver. + + To compile this driver as a module, choose M here. The module will + be called twl6040_vibra. + +config INPUT_UINPUT + tristate "User level driver support" + help + Say Y here if you want to support user level drivers for input + subsystem accessible under char device 10:223 - /dev/input/uinput. + + To compile this driver as a module, choose M here: the + module will be called uinput. + +config INPUT_SGI_BTNS + tristate "SGI Indy/O2 volume button interface" + depends on SGI_IP22 || SGI_IP32 + help + Say Y here if you want to support SGI Indy/O2 volume button interface. + + To compile this driver as a module, choose M here: the + module will be called sgi_btns. + +config HP_SDC_RTC + tristate "HP SDC Real Time Clock" + depends on (GSC || HP300) && SERIO + select HP_SDC + help + Say Y here if you want to support the built-in real time clock + of the HP SDC controller. + +config INPUT_PALMAS_PWRBUTTON + tristate "Palmas Power button Driver" + depends on MFD_PALMAS + help + Say Y here if you want to enable power key reporting via the + Palmas family of PMICs. + + To compile this driver as a module, choose M here. The module will + be called palmas_pwrbutton. + +config INPUT_PCF50633_PMU + tristate "PCF50633 PMU events" + depends on MFD_PCF50633 + help + Say Y to include support for delivering PMU events via input + layer on NXP PCF50633. + +config INPUT_PCF8574 + tristate "PCF8574 Keypad input device" + depends on I2C + help + Say Y here if you want to support a keypad connected via I2C + with a PCF8574. + + To compile this driver as a module, choose M here: the + module will be called pcf8574_keypad. + +config INPUT_PWM_BEEPER + tristate "PWM beeper support" + depends on PWM + help + Say Y here to get support for PWM based beeper devices. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module will be + called pwm-beeper. + +config INPUT_PWM_VIBRA + tristate "PWM vibrator support" + depends on PWM + select INPUT_FF_MEMLESS + help + Say Y here to get support for PWM based vibrator devices. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module will be + called pwm-vibra. + +config INPUT_RK805_PWRKEY + tristate "Rockchip RK805 PMIC power key support" + depends on MFD_RK808 + help + Select this option to enable power key driver for RK805. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module will be + called rk805_pwrkey. + +config INPUT_GPIO_ROTARY_ENCODER + tristate "Rotary encoders connected to GPIO pins" + depends on GPIOLIB || COMPILE_TEST + help + Say Y here to add support for rotary encoders connected to GPIO lines. + Check file:Documentation/input/devices/rotary-encoder.rst for more + information. + + To compile this driver as a module, choose M here: the + module will be called rotary_encoder. + +config INPUT_RB532_BUTTON + tristate "Mikrotik Routerboard 532 button interface" + depends on MIKROTIK_RB532 + depends on GPIOLIB + help + Say Y here if you want support for the S1 button built into + Mikrotik's Routerboard 532. + + To compile this driver as a module, choose M here: the + module will be called rb532_button. + +config INPUT_DA7280_HAPTICS + tristate "Dialog Semiconductor DA7280 haptics support" + depends on INPUT && I2C + select REGMAP_I2C + help + Say Y to enable support for the Dialog DA7280 haptics driver. + The haptics can be controlled by PWM or GPIO + with I2C communication. + + To compile this driver as a module, choose M here: the + module will be called da7280. + +config INPUT_DA9052_ONKEY + tristate "Dialog DA9052/DA9053 Onkey" + depends on PMIC_DA9052 + help + Support the ONKEY of Dialog DA9052 PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the + module will be called da9052_onkey. + +config INPUT_DA9055_ONKEY + tristate "Dialog Semiconductor DA9055 ONKEY" + depends on MFD_DA9055 + help + Support the ONKEY of DA9055 PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called da9055_onkey. + +config INPUT_DA9063_ONKEY + tristate "Dialog DA9063/62/61 OnKey" + depends on MFD_DA9063 || MFD_DA9062 + help + Support the ONKEY of Dialog DA9063, DA9062 and DA9061 Power + Management ICs as an input device capable of reporting the + power button status. + + To compile this driver as a module, choose M here: the module + will be called da9063_onkey. + +config INPUT_DM355EVM + tristate "TI DaVinci DM355 EVM Keypad and IR Remote" + depends on MFD_DM355EVM_MSP + select INPUT_SPARSEKMAP + help + Supports the pushbuttons and IR remote used with + the DM355 EVM board. + + To compile this driver as a module, choose M here: the + module will be called dm355evm_keys. + +config INPUT_WM831X_ON + tristate "WM831X ON pin" + depends on MFD_WM831X + help + Support the ON pin of WM831X PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called wm831x_on. + +config INPUT_PCAP + tristate "Motorola EZX PCAP misc input events" + depends on EZX_PCAP + help + Say Y here if you want to use Power key and Headphone button + on Motorola EZX phones. + + To compile this driver as a module, choose M here: the + module will be called pcap_keys. + +config INPUT_ADXL34X + tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer" + default n + help + Say Y here if you have a Accelerometer interface using the + ADXL345/6 controller, and your board-specific initialization + code includes that in its table of devices. + + This driver can use either I2C or SPI communication to the + ADXL345/6 controller. Select the appropriate method for + your system. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called adxl34x. + +config INPUT_ADXL34X_I2C + tristate "support I2C bus connection" + depends on INPUT_ADXL34X && I2C + default y + help + Say Y here if you have ADXL345/6 hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adxl34x-i2c. + +config INPUT_ADXL34X_SPI + tristate "support SPI bus connection" + depends on INPUT_ADXL34X && SPI + default y + help + Say Y here if you have ADXL345/6 hooked to a SPI bus. + + To compile this driver as a module, choose M here: the + module will be called adxl34x-spi. + +config INPUT_IBM_PANEL + tristate "IBM Operation Panel driver" + depends on I2C && I2C_SLAVE + help + Say Y here if you have an IBM Operation Panel connected to your system + over I2C. The panel is typically connected only to a system's service + processor (BMC). + + If unsure, say N. + + The Operation Panel is a controller with some buttons and an LCD + display that allows someone with physical access to the system to + perform various administrative tasks. This driver only supports the part + of the controller that sends commands to the system. + + To compile this driver as a module, choose M here: the module will be + called ibm-panel. + +config INPUT_IMS_PCU + tristate "IMS Passenger Control Unit driver" + depends on USB + depends on LEDS_CLASS + help + Say Y here if you have system with IMS Rave Passenger Control Unit. + + To compile this driver as a module, choose M here: the module will be + called ims_pcu. + +config INPUT_IQS269A + tristate "Azoteq IQS269A capacitive touch controller" + depends on I2C + select REGMAP_I2C + help + Say Y to enable support for the Azoteq IQS269A capacitive + touch controller. + + To compile this driver as a module, choose M here: the + module will be called iqs269a. + +config INPUT_IQS626A + tristate "Azoteq IQS626A capacitive touch controller" + depends on I2C + select REGMAP_I2C + help + Say Y to enable support for the Azoteq IQS626A capacitive + touch controller. + + To compile this driver as a module, choose M here: the + module will be called iqs626a. + +config INPUT_IQS7222 + tristate "Azoteq IQS7222A/B/C capacitive touch controller" + depends on I2C + help + Say Y to enable support for the Azoteq IQS7222A/B/C family + of capacitive touch controllers. + + To compile this driver as a module, choose M here: the + module will be called iqs7222. + +config INPUT_CMA3000 + tristate "VTI CMA3000 Tri-axis accelerometer" + help + Say Y here if you want to use VTI CMA3000_D0x Accelerometer + driver + + This driver currently only supports I2C interface to the + controller. Also select the I2C method. + + If unsure, say N + + To compile this driver as a module, choose M here: the + module will be called cma3000_d0x. + +config INPUT_CMA3000_I2C + tristate "Support I2C bus connection" + depends on INPUT_CMA3000 && I2C + help + Say Y here if you want to use VTI CMA3000_D0x Accelerometer + through I2C interface. + + To compile this driver as a module, choose M here: the + module will be called cma3000_d0x_i2c. + +config INPUT_XEN_KBDDEV_FRONTEND + tristate "Xen virtual keyboard and mouse support" + depends on XEN + default y + select XEN_XENBUS_FRONTEND + help + This driver implements the front-end of the Xen virtual + keyboard and mouse device driver. It communicates with a back-end + in another domain. + + To compile this driver as a module, choose M here: the + module will be called xen-kbdfront. + +config INPUT_IDEAPAD_SLIDEBAR + tristate "IdeaPad Laptop Slidebar" + depends on INPUT + depends on SERIO_I8042 + help + Say Y here if you have an IdeaPad laptop with a slidebar. + + To compile this driver as a module, choose M here: the + module will be called ideapad_slidebar. + +config INPUT_SOC_BUTTON_ARRAY + tristate "Windows-compatible SoC Button Array" + depends on KEYBOARD_GPIO && ACPI + help + Say Y here if you have a SoC-based tablet that originally runs + Windows 8 or a Microsoft Surface Book 2, Pro 5, Laptop 1 or later. + + To compile this driver as a module, choose M here: the + module will be called soc_button_array. + +config INPUT_DRV260X_HAPTICS + tristate "TI DRV260X haptics support" + depends on INPUT && I2C + depends on GPIOLIB || COMPILE_TEST + select INPUT_FF_MEMLESS + select REGMAP_I2C + help + Say Y to enable support for the TI DRV260X haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv260x-haptics. + +config INPUT_DRV2665_HAPTICS + tristate "TI DRV2665 haptics support" + depends on INPUT && I2C + select INPUT_FF_MEMLESS + select REGMAP_I2C + help + Say Y to enable support for the TI DRV2665 haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv2665-haptics. + +config INPUT_DRV2667_HAPTICS + tristate "TI DRV2667 haptics support" + depends on INPUT && I2C + select INPUT_FF_MEMLESS + select REGMAP_I2C + help + Say Y to enable support for the TI DRV2667 haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv2667-haptics. + +config INPUT_HISI_POWERKEY + tristate "Hisilicon PMIC ONKEY support" + depends on ARCH_HISI || COMPILE_TEST + help + Say Y to enable support for PMIC ONKEY. + + To compile this driver as a module, choose M here: the + module will be called hisi_powerkey. + +config INPUT_RAVE_SP_PWRBUTTON + tristate "RAVE SP Power button Driver" + depends on RAVE_SP_CORE + help + Say Y here if you want to enable power key reporting from RAVE SP + + To compile this driver as a module, choose M here: the + module will be called rave-sp-pwrbutton. + +config INPUT_SC27XX_VIBRA + tristate "Spreadtrum sc27xx vibrator support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + select INPUT_FF_MEMLESS + help + This option enables support for Spreadtrum sc27xx vibrator driver. + + To compile this driver as a module, choose M here. The module will + be called sc27xx_vibra. + +config INPUT_RT5120_PWRKEY + tristate "RT5120 PMIC power key support" + depends on MFD_RT5120 || COMPILE_TEST + help + This enables support for RT5120 PMIC power key driver. + + To compile this driver as a module, choose M here. the module will + be called rt5120-pwrkey. + +config INPUT_STPMIC1_ONKEY + tristate "STPMIC1 PMIC Onkey support" + depends on MFD_STPMIC1 + help + Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey + can be used to wakeup from low power modes and force a shut-down on + long press. + + To compile this driver as a module, choose M here: the + module will be called stpmic1_onkey. + +endif |