summaryrefslogtreecommitdiffstats
path: root/drivers/input/misc/iqs7222.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/misc/iqs7222.c')
-rw-r--r--drivers/input/misc/iqs7222.c2602
1 files changed, 2602 insertions, 0 deletions
diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c
new file mode 100644
index 000000000..f24b174c7
--- /dev/null
+++ b/drivers/input/misc/iqs7222.c
@@ -0,0 +1,2602 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Azoteq IQS7222A/B/C Capacitive Touch Controller
+ *
+ * Copyright (C) 2022 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#define IQS7222_PROD_NUM 0x00
+#define IQS7222_PROD_NUM_A 840
+#define IQS7222_PROD_NUM_B 698
+#define IQS7222_PROD_NUM_C 863
+
+#define IQS7222_SYS_STATUS 0x10
+#define IQS7222_SYS_STATUS_RESET BIT(3)
+#define IQS7222_SYS_STATUS_ATI_ERROR BIT(1)
+#define IQS7222_SYS_STATUS_ATI_ACTIVE BIT(0)
+
+#define IQS7222_CHAN_SETUP_0_REF_MODE_MASK GENMASK(15, 14)
+#define IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW BIT(15)
+#define IQS7222_CHAN_SETUP_0_REF_MODE_REF BIT(14)
+#define IQS7222_CHAN_SETUP_0_CHAN_EN BIT(8)
+
+#define IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK GENMASK(2, 0)
+#define IQS7222_SLDR_SETUP_2_RES_MASK GENMASK(15, 8)
+#define IQS7222_SLDR_SETUP_2_RES_SHIFT 8
+#define IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK GENMASK(7, 0)
+
+#define IQS7222_GPIO_SETUP_0_GPIO_EN BIT(0)
+
+#define IQS7222_SYS_SETUP 0xD0
+#define IQS7222_SYS_SETUP_INTF_MODE_MASK GENMASK(7, 6)
+#define IQS7222_SYS_SETUP_INTF_MODE_TOUCH BIT(7)
+#define IQS7222_SYS_SETUP_INTF_MODE_EVENT BIT(6)
+#define IQS7222_SYS_SETUP_PWR_MODE_MASK GENMASK(5, 4)
+#define IQS7222_SYS_SETUP_PWR_MODE_AUTO IQS7222_SYS_SETUP_PWR_MODE_MASK
+#define IQS7222_SYS_SETUP_REDO_ATI BIT(2)
+#define IQS7222_SYS_SETUP_ACK_RESET BIT(0)
+
+#define IQS7222_EVENT_MASK_ATI BIT(12)
+#define IQS7222_EVENT_MASK_SLDR BIT(10)
+#define IQS7222_EVENT_MASK_TOUCH BIT(1)
+#define IQS7222_EVENT_MASK_PROX BIT(0)
+
+#define IQS7222_COMMS_HOLD BIT(0)
+#define IQS7222_COMMS_ERROR 0xEEEE
+#define IQS7222_COMMS_RETRY_MS 50
+#define IQS7222_COMMS_TIMEOUT_MS 100
+#define IQS7222_RESET_TIMEOUT_MS 250
+#define IQS7222_ATI_TIMEOUT_MS 2000
+
+#define IQS7222_MAX_COLS_STAT 8
+#define IQS7222_MAX_COLS_CYCLE 3
+#define IQS7222_MAX_COLS_GLBL 3
+#define IQS7222_MAX_COLS_BTN 3
+#define IQS7222_MAX_COLS_CHAN 6
+#define IQS7222_MAX_COLS_FILT 2
+#define IQS7222_MAX_COLS_SLDR 11
+#define IQS7222_MAX_COLS_GPIO 3
+#define IQS7222_MAX_COLS_SYS 13
+
+#define IQS7222_MAX_CHAN 20
+#define IQS7222_MAX_SLDR 2
+
+#define IQS7222_NUM_RETRIES 5
+#define IQS7222_REG_OFFSET 0x100
+
+enum iqs7222_reg_key_id {
+ IQS7222_REG_KEY_NONE,
+ IQS7222_REG_KEY_PROX,
+ IQS7222_REG_KEY_TOUCH,
+ IQS7222_REG_KEY_DEBOUNCE,
+ IQS7222_REG_KEY_TAP,
+ IQS7222_REG_KEY_TAP_LEGACY,
+ IQS7222_REG_KEY_AXIAL,
+ IQS7222_REG_KEY_AXIAL_LEGACY,
+ IQS7222_REG_KEY_WHEEL,
+ IQS7222_REG_KEY_NO_WHEEL,
+ IQS7222_REG_KEY_RESERVED
+};
+
+enum iqs7222_reg_grp_id {
+ IQS7222_REG_GRP_STAT,
+ IQS7222_REG_GRP_FILT,
+ IQS7222_REG_GRP_CYCLE,
+ IQS7222_REG_GRP_GLBL,
+ IQS7222_REG_GRP_BTN,
+ IQS7222_REG_GRP_CHAN,
+ IQS7222_REG_GRP_SLDR,
+ IQS7222_REG_GRP_GPIO,
+ IQS7222_REG_GRP_SYS,
+ IQS7222_NUM_REG_GRPS
+};
+
+static const char * const iqs7222_reg_grp_names[IQS7222_NUM_REG_GRPS] = {
+ [IQS7222_REG_GRP_CYCLE] = "cycle",
+ [IQS7222_REG_GRP_CHAN] = "channel",
+ [IQS7222_REG_GRP_SLDR] = "slider",
+ [IQS7222_REG_GRP_GPIO] = "gpio",
+};
+
+static const unsigned int iqs7222_max_cols[IQS7222_NUM_REG_GRPS] = {
+ [IQS7222_REG_GRP_STAT] = IQS7222_MAX_COLS_STAT,
+ [IQS7222_REG_GRP_CYCLE] = IQS7222_MAX_COLS_CYCLE,
+ [IQS7222_REG_GRP_GLBL] = IQS7222_MAX_COLS_GLBL,
+ [IQS7222_REG_GRP_BTN] = IQS7222_MAX_COLS_BTN,
+ [IQS7222_REG_GRP_CHAN] = IQS7222_MAX_COLS_CHAN,
+ [IQS7222_REG_GRP_FILT] = IQS7222_MAX_COLS_FILT,
+ [IQS7222_REG_GRP_SLDR] = IQS7222_MAX_COLS_SLDR,
+ [IQS7222_REG_GRP_GPIO] = IQS7222_MAX_COLS_GPIO,
+ [IQS7222_REG_GRP_SYS] = IQS7222_MAX_COLS_SYS,
+};
+
+static const unsigned int iqs7222_gpio_links[] = { 2, 5, 6, };
+
+struct iqs7222_event_desc {
+ const char *name;
+ u16 mask;
+ u16 val;
+ u16 enable;
+ enum iqs7222_reg_key_id reg_key;
+};
+
+static const struct iqs7222_event_desc iqs7222_kp_events[] = {
+ {
+ .name = "event-prox",
+ .enable = IQS7222_EVENT_MASK_PROX,
+ .reg_key = IQS7222_REG_KEY_PROX,
+ },
+ {
+ .name = "event-touch",
+ .enable = IQS7222_EVENT_MASK_TOUCH,
+ .reg_key = IQS7222_REG_KEY_TOUCH,
+ },
+};
+
+static const struct iqs7222_event_desc iqs7222_sl_events[] = {
+ { .name = "event-press", },
+ {
+ .name = "event-tap",
+ .mask = BIT(0),
+ .val = BIT(0),
+ .enable = BIT(0),
+ .reg_key = IQS7222_REG_KEY_TAP,
+ },
+ {
+ .name = "event-swipe-pos",
+ .mask = BIT(5) | BIT(1),
+ .val = BIT(1),
+ .enable = BIT(1),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-swipe-neg",
+ .mask = BIT(5) | BIT(1),
+ .val = BIT(5) | BIT(1),
+ .enable = BIT(1),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-flick-pos",
+ .mask = BIT(5) | BIT(2),
+ .val = BIT(2),
+ .enable = BIT(2),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+ {
+ .name = "event-flick-neg",
+ .mask = BIT(5) | BIT(2),
+ .val = BIT(5) | BIT(2),
+ .enable = BIT(2),
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ },
+};
+
+struct iqs7222_reg_grp_desc {
+ u16 base;
+ int num_row;
+ int num_col;
+};
+
+struct iqs7222_dev_desc {
+ u16 prod_num;
+ u16 fw_major;
+ u16 fw_minor;
+ u16 sldr_res;
+ u16 touch_link;
+ u16 wheel_enable;
+ int allow_offset;
+ int event_offset;
+ int comms_offset;
+ bool legacy_gesture;
+ struct iqs7222_reg_grp_desc reg_grps[IQS7222_NUM_REG_GRPS];
+};
+
+static const struct iqs7222_dev_desc iqs7222_devs[] = {
+ {
+ .prod_num = IQS7222_PROD_NUM_A,
+ .fw_major = 1,
+ .fw_minor = 13,
+ .sldr_res = U8_MAX * 16,
+ .touch_link = 1768,
+ .allow_offset = 9,
+ .event_offset = 10,
+ .comms_offset = 12,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 8,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 7,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8700,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 12,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xA000,
+ .num_row = 12,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xAC00,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_SLDR] = {
+ .base = 0xB000,
+ .num_row = 2,
+ .num_col = 11,
+ },
+ [IQS7222_REG_GRP_GPIO] = {
+ .base = 0xC000,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 13,
+ },
+ },
+ },
+ {
+ .prod_num = IQS7222_PROD_NUM_A,
+ .fw_major = 1,
+ .fw_minor = 12,
+ .sldr_res = U8_MAX * 16,
+ .touch_link = 1768,
+ .allow_offset = 9,
+ .event_offset = 10,
+ .comms_offset = 12,
+ .legacy_gesture = true,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 8,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 7,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8700,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 12,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xA000,
+ .num_row = 12,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xAC00,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_SLDR] = {
+ .base = 0xB000,
+ .num_row = 2,
+ .num_col = 11,
+ },
+ [IQS7222_REG_GRP_GPIO] = {
+ .base = 0xC000,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 13,
+ },
+ },
+ },
+ {
+ .prod_num = IQS7222_PROD_NUM_B,
+ .fw_major = 1,
+ .fw_minor = 43,
+ .event_offset = 10,
+ .comms_offset = 11,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 10,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8A00,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 20,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xB000,
+ .num_row = 20,
+ .num_col = 4,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xC400,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 13,
+ },
+ },
+ },
+ {
+ .prod_num = IQS7222_PROD_NUM_B,
+ .fw_major = 1,
+ .fw_minor = 27,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 10,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8A00,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 20,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xB000,
+ .num_row = 20,
+ .num_col = 4,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xC400,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 10,
+ },
+ },
+ },
+ {
+ .prod_num = IQS7222_PROD_NUM_C,
+ .fw_major = 2,
+ .fw_minor = 6,
+ .sldr_res = U16_MAX,
+ .touch_link = 1686,
+ .wheel_enable = BIT(3),
+ .event_offset = 9,
+ .comms_offset = 10,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 5,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8500,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 10,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xA000,
+ .num_row = 10,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xAA00,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_SLDR] = {
+ .base = 0xB000,
+ .num_row = 2,
+ .num_col = 10,
+ },
+ [IQS7222_REG_GRP_GPIO] = {
+ .base = 0xC000,
+ .num_row = 3,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 12,
+ },
+ },
+ },
+ {
+ .prod_num = IQS7222_PROD_NUM_C,
+ .fw_major = 1,
+ .fw_minor = 13,
+ .sldr_res = U16_MAX,
+ .touch_link = 1674,
+ .wheel_enable = BIT(3),
+ .event_offset = 9,
+ .comms_offset = 10,
+ .reg_grps = {
+ [IQS7222_REG_GRP_STAT] = {
+ .base = IQS7222_SYS_STATUS,
+ .num_row = 1,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_CYCLE] = {
+ .base = 0x8000,
+ .num_row = 5,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_GLBL] = {
+ .base = 0x8500,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_BTN] = {
+ .base = 0x9000,
+ .num_row = 10,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_CHAN] = {
+ .base = 0xA000,
+ .num_row = 10,
+ .num_col = 6,
+ },
+ [IQS7222_REG_GRP_FILT] = {
+ .base = 0xAA00,
+ .num_row = 1,
+ .num_col = 2,
+ },
+ [IQS7222_REG_GRP_SLDR] = {
+ .base = 0xB000,
+ .num_row = 2,
+ .num_col = 10,
+ },
+ [IQS7222_REG_GRP_GPIO] = {
+ .base = 0xC000,
+ .num_row = 1,
+ .num_col = 3,
+ },
+ [IQS7222_REG_GRP_SYS] = {
+ .base = IQS7222_SYS_SETUP,
+ .num_row = 1,
+ .num_col = 11,
+ },
+ },
+ },
+};
+
+struct iqs7222_prop_desc {
+ const char *name;
+ enum iqs7222_reg_grp_id reg_grp;
+ enum iqs7222_reg_key_id reg_key;
+ int reg_offset;
+ int reg_shift;
+ int reg_width;
+ int val_pitch;
+ int val_min;
+ int val_max;
+ bool invert;
+ const char *label;
+};
+
+static const struct iqs7222_prop_desc iqs7222_props[] = {
+ {
+ .name = "azoteq,conv-period",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 0,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .label = "conversion period",
+ },
+ {
+ .name = "azoteq,conv-frac",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 0,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .label = "conversion frequency fractional divider",
+ },
+ {
+ .name = "azoteq,rx-float-inactive",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 1,
+ .reg_shift = 6,
+ .reg_width = 1,
+ .invert = true,
+ },
+ {
+ .name = "azoteq,dead-time-enable",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 1,
+ .reg_shift = 5,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,tx-freq-fosc",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 1,
+ .reg_shift = 4,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,vbias-enable",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 1,
+ .reg_shift = 3,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,sense-mode",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 3,
+ .val_max = 3,
+ .label = "sensing mode",
+ },
+ {
+ .name = "azoteq,iref-enable",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 2,
+ .reg_shift = 10,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,iref-level",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 2,
+ .reg_shift = 4,
+ .reg_width = 4,
+ .label = "current reference level",
+ },
+ {
+ .name = "azoteq,iref-trim",
+ .reg_grp = IQS7222_REG_GRP_CYCLE,
+ .reg_offset = 2,
+ .reg_shift = 0,
+ .reg_width = 4,
+ .label = "current reference trim",
+ },
+ {
+ .name = "azoteq,max-counts",
+ .reg_grp = IQS7222_REG_GRP_GLBL,
+ .reg_offset = 0,
+ .reg_shift = 13,
+ .reg_width = 2,
+ .label = "maximum counts",
+ },
+ {
+ .name = "azoteq,auto-mode",
+ .reg_grp = IQS7222_REG_GRP_GLBL,
+ .reg_offset = 0,
+ .reg_shift = 2,
+ .reg_width = 2,
+ .label = "number of conversions",
+ },
+ {
+ .name = "azoteq,ati-frac-div-fine",
+ .reg_grp = IQS7222_REG_GRP_GLBL,
+ .reg_offset = 1,
+ .reg_shift = 9,
+ .reg_width = 5,
+ .label = "ATI fine fractional divider",
+ },
+ {
+ .name = "azoteq,ati-frac-div-coarse",
+ .reg_grp = IQS7222_REG_GRP_GLBL,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 5,
+ .label = "ATI coarse fractional divider",
+ },
+ {
+ .name = "azoteq,ati-comp-select",
+ .reg_grp = IQS7222_REG_GRP_GLBL,
+ .reg_offset = 2,
+ .reg_shift = 0,
+ .reg_width = 10,
+ .label = "ATI compensation selection",
+ },
+ {
+ .name = "azoteq,ati-band",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 0,
+ .reg_shift = 12,
+ .reg_width = 2,
+ .label = "ATI band",
+ },
+ {
+ .name = "azoteq,global-halt",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 0,
+ .reg_shift = 11,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,invert-enable",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 0,
+ .reg_shift = 10,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,dual-direction",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 0,
+ .reg_shift = 9,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,samp-cap-double",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 0,
+ .reg_shift = 3,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,vref-half",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 0,
+ .reg_shift = 2,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,proj-bias",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 0,
+ .reg_shift = 0,
+ .reg_width = 2,
+ .label = "projected bias current",
+ },
+ {
+ .name = "azoteq,ati-target",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 1,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 8,
+ .label = "ATI target",
+ },
+ {
+ .name = "azoteq,ati-base",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 1,
+ .reg_shift = 3,
+ .reg_width = 5,
+ .val_pitch = 16,
+ .label = "ATI base",
+ },
+ {
+ .name = "azoteq,ati-mode",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 3,
+ .val_max = 5,
+ .label = "ATI mode",
+ },
+ {
+ .name = "azoteq,ati-frac-div-fine",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 2,
+ .reg_shift = 9,
+ .reg_width = 5,
+ .label = "ATI fine fractional divider",
+ },
+ {
+ .name = "azoteq,ati-frac-mult-coarse",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 2,
+ .reg_shift = 5,
+ .reg_width = 4,
+ .label = "ATI coarse fractional multiplier",
+ },
+ {
+ .name = "azoteq,ati-frac-div-coarse",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 2,
+ .reg_shift = 0,
+ .reg_width = 5,
+ .label = "ATI coarse fractional divider",
+ },
+ {
+ .name = "azoteq,ati-comp-div",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 3,
+ .reg_shift = 11,
+ .reg_width = 5,
+ .label = "ATI compensation divider",
+ },
+ {
+ .name = "azoteq,ati-comp-select",
+ .reg_grp = IQS7222_REG_GRP_CHAN,
+ .reg_offset = 3,
+ .reg_shift = 0,
+ .reg_width = 10,
+ .label = "ATI compensation selection",
+ },
+ {
+ .name = "azoteq,debounce-exit",
+ .reg_grp = IQS7222_REG_GRP_BTN,
+ .reg_key = IQS7222_REG_KEY_DEBOUNCE,
+ .reg_offset = 0,
+ .reg_shift = 12,
+ .reg_width = 4,
+ .label = "debounce exit factor",
+ },
+ {
+ .name = "azoteq,debounce-enter",
+ .reg_grp = IQS7222_REG_GRP_BTN,
+ .reg_key = IQS7222_REG_KEY_DEBOUNCE,
+ .reg_offset = 0,
+ .reg_shift = 8,
+ .reg_width = 4,
+ .label = "debounce entrance factor",
+ },
+ {
+ .name = "azoteq,thresh",
+ .reg_grp = IQS7222_REG_GRP_BTN,
+ .reg_key = IQS7222_REG_KEY_PROX,
+ .reg_offset = 0,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .val_max = 127,
+ .label = "threshold",
+ },
+ {
+ .name = "azoteq,thresh",
+ .reg_grp = IQS7222_REG_GRP_BTN,
+ .reg_key = IQS7222_REG_KEY_TOUCH,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .label = "threshold",
+ },
+ {
+ .name = "azoteq,hyst",
+ .reg_grp = IQS7222_REG_GRP_BTN,
+ .reg_key = IQS7222_REG_KEY_TOUCH,
+ .reg_offset = 1,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .label = "hysteresis",
+ },
+ {
+ .name = "azoteq,lta-beta-lp",
+ .reg_grp = IQS7222_REG_GRP_FILT,
+ .reg_offset = 0,
+ .reg_shift = 12,
+ .reg_width = 4,
+ .label = "low-power mode long-term average beta",
+ },
+ {
+ .name = "azoteq,lta-beta-np",
+ .reg_grp = IQS7222_REG_GRP_FILT,
+ .reg_offset = 0,
+ .reg_shift = 8,
+ .reg_width = 4,
+ .label = "normal-power mode long-term average beta",
+ },
+ {
+ .name = "azoteq,counts-beta-lp",
+ .reg_grp = IQS7222_REG_GRP_FILT,
+ .reg_offset = 0,
+ .reg_shift = 4,
+ .reg_width = 4,
+ .label = "low-power mode counts beta",
+ },
+ {
+ .name = "azoteq,counts-beta-np",
+ .reg_grp = IQS7222_REG_GRP_FILT,
+ .reg_offset = 0,
+ .reg_shift = 0,
+ .reg_width = 4,
+ .label = "normal-power mode counts beta",
+ },
+ {
+ .name = "azoteq,lta-fast-beta-lp",
+ .reg_grp = IQS7222_REG_GRP_FILT,
+ .reg_offset = 1,
+ .reg_shift = 4,
+ .reg_width = 4,
+ .label = "low-power mode long-term average fast beta",
+ },
+ {
+ .name = "azoteq,lta-fast-beta-np",
+ .reg_grp = IQS7222_REG_GRP_FILT,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 4,
+ .label = "normal-power mode long-term average fast beta",
+ },
+ {
+ .name = "azoteq,lower-cal",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_offset = 0,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .label = "lower calibration",
+ },
+ {
+ .name = "azoteq,static-beta",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_NO_WHEEL,
+ .reg_offset = 0,
+ .reg_shift = 6,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,bottom-beta",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_NO_WHEEL,
+ .reg_offset = 0,
+ .reg_shift = 3,
+ .reg_width = 3,
+ .label = "bottom beta",
+ },
+ {
+ .name = "azoteq,static-beta",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_WHEEL,
+ .reg_offset = 0,
+ .reg_shift = 7,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,bottom-beta",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_WHEEL,
+ .reg_offset = 0,
+ .reg_shift = 4,
+ .reg_width = 3,
+ .label = "bottom beta",
+ },
+ {
+ .name = "azoteq,bottom-speed",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_offset = 1,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .label = "bottom speed",
+ },
+ {
+ .name = "azoteq,upper-cal",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .label = "upper calibration",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_TAP,
+ .reg_offset = 9,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_TAP_LEGACY,
+ .reg_offset = 9,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 4,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-min-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_TAP,
+ .reg_offset = 9,
+ .reg_shift = 3,
+ .reg_width = 5,
+ .val_pitch = 16,
+ .label = "minimum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-min-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_TAP_LEGACY,
+ .reg_offset = 9,
+ .reg_shift = 3,
+ .reg_width = 5,
+ .val_pitch = 4,
+ .label = "minimum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-dist",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ .reg_offset = 10,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "gesture distance",
+ },
+ {
+ .name = "azoteq,gesture-dist",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_AXIAL_LEGACY,
+ .reg_offset = 10,
+ .reg_shift = 8,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "gesture distance",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_AXIAL,
+ .reg_offset = 10,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .val_pitch = 16,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "azoteq,gesture-max-ms",
+ .reg_grp = IQS7222_REG_GRP_SLDR,
+ .reg_key = IQS7222_REG_KEY_AXIAL_LEGACY,
+ .reg_offset = 10,
+ .reg_shift = 0,
+ .reg_width = 8,
+ .val_pitch = 4,
+ .label = "maximum gesture time",
+ },
+ {
+ .name = "drive-open-drain",
+ .reg_grp = IQS7222_REG_GRP_GPIO,
+ .reg_offset = 0,
+ .reg_shift = 1,
+ .reg_width = 1,
+ },
+ {
+ .name = "azoteq,timeout-ati-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 1,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .val_pitch = 500,
+ .label = "ATI error timeout",
+ },
+ {
+ .name = "azoteq,rate-ati-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 2,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .label = "ATI report rate",
+ },
+ {
+ .name = "azoteq,timeout-np-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 3,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .label = "normal-power mode timeout",
+ },
+ {
+ .name = "azoteq,rate-np-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 4,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .val_max = 3000,
+ .label = "normal-power mode report rate",
+ },
+ {
+ .name = "azoteq,timeout-lp-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 5,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .label = "low-power mode timeout",
+ },
+ {
+ .name = "azoteq,rate-lp-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 6,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .val_max = 3000,
+ .label = "low-power mode report rate",
+ },
+ {
+ .name = "azoteq,timeout-ulp-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 7,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .label = "ultra-low-power mode timeout",
+ },
+ {
+ .name = "azoteq,rate-ulp-ms",
+ .reg_grp = IQS7222_REG_GRP_SYS,
+ .reg_offset = 8,
+ .reg_shift = 0,
+ .reg_width = 16,
+ .val_max = 3000,
+ .label = "ultra-low-power mode report rate",
+ },
+};
+
+struct iqs7222_private {
+ const struct iqs7222_dev_desc *dev_desc;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *irq_gpio;
+ struct i2c_client *client;
+ struct input_dev *keypad;
+ unsigned int kp_type[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)];
+ unsigned int kp_code[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)];
+ unsigned int sl_code[IQS7222_MAX_SLDR][ARRAY_SIZE(iqs7222_sl_events)];
+ unsigned int sl_axis[IQS7222_MAX_SLDR];
+ u16 cycle_setup[IQS7222_MAX_CHAN / 2][IQS7222_MAX_COLS_CYCLE];
+ u16 glbl_setup[IQS7222_MAX_COLS_GLBL];
+ u16 btn_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_BTN];
+ u16 chan_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_CHAN];
+ u16 filt_setup[IQS7222_MAX_COLS_FILT];
+ u16 sldr_setup[IQS7222_MAX_SLDR][IQS7222_MAX_COLS_SLDR];
+ u16 gpio_setup[ARRAY_SIZE(iqs7222_gpio_links)][IQS7222_MAX_COLS_GPIO];
+ u16 sys_setup[IQS7222_MAX_COLS_SYS];
+};
+
+static u16 *iqs7222_setup(struct iqs7222_private *iqs7222,
+ enum iqs7222_reg_grp_id reg_grp, int row)
+{
+ switch (reg_grp) {
+ case IQS7222_REG_GRP_CYCLE:
+ return iqs7222->cycle_setup[row];
+
+ case IQS7222_REG_GRP_GLBL:
+ return iqs7222->glbl_setup;
+
+ case IQS7222_REG_GRP_BTN:
+ return iqs7222->btn_setup[row];
+
+ case IQS7222_REG_GRP_CHAN:
+ return iqs7222->chan_setup[row];
+
+ case IQS7222_REG_GRP_FILT:
+ return iqs7222->filt_setup;
+
+ case IQS7222_REG_GRP_SLDR:
+ return iqs7222->sldr_setup[row];
+
+ case IQS7222_REG_GRP_GPIO:
+ return iqs7222->gpio_setup[row];
+
+ case IQS7222_REG_GRP_SYS:
+ return iqs7222->sys_setup;
+
+ default:
+ return NULL;
+ }
+}
+
+static int iqs7222_irq_poll(struct iqs7222_private *iqs7222, u16 timeout_ms)
+{
+ ktime_t irq_timeout = ktime_add_ms(ktime_get(), timeout_ms);
+ int ret;
+
+ do {
+ usleep_range(1000, 1100);
+
+ ret = gpiod_get_value_cansleep(iqs7222->irq_gpio);
+ if (ret < 0)
+ return ret;
+ else if (ret > 0)
+ return 0;
+ } while (ktime_compare(ktime_get(), irq_timeout) < 0);
+
+ return -EBUSY;
+}
+
+static int iqs7222_hard_reset(struct iqs7222_private *iqs7222)
+{
+ struct i2c_client *client = iqs7222->client;
+ int error;
+
+ if (!iqs7222->reset_gpio)
+ return 0;
+
+ gpiod_set_value_cansleep(iqs7222->reset_gpio, 1);
+ usleep_range(1000, 1100);
+
+ gpiod_set_value_cansleep(iqs7222->reset_gpio, 0);
+
+ error = iqs7222_irq_poll(iqs7222, IQS7222_RESET_TIMEOUT_MS);
+ if (error)
+ dev_err(&client->dev, "Failed to reset device: %d\n", error);
+
+ return error;
+}
+
+static int iqs7222_force_comms(struct iqs7222_private *iqs7222)
+{
+ u8 msg_buf[] = { 0xFF, };
+ int ret;
+
+ /*
+ * The device cannot communicate until it asserts its interrupt (RDY)
+ * pin. Attempts to do so while RDY is deasserted return an ACK; how-
+ * ever all write data is ignored, and all read data returns 0xEE.
+ *
+ * Unsolicited communication must be preceded by a special force com-
+ * munication command, after which the device eventually asserts its
+ * RDY pin and agrees to communicate.
+ *
+ * Regardless of whether communication is forced or the result of an
+ * interrupt, the device automatically deasserts its RDY pin once it
+ * detects an I2C stop condition, or a timeout expires.
+ */
+ ret = gpiod_get_value_cansleep(iqs7222->irq_gpio);
+ if (ret < 0)
+ return ret;
+ else if (ret > 0)
+ return 0;
+
+ ret = i2c_master_send(iqs7222->client, msg_buf, sizeof(msg_buf));
+ if (ret < (int)sizeof(msg_buf)) {
+ if (ret >= 0)
+ ret = -EIO;
+
+ /*
+ * The datasheet states that the host must wait to retry any
+ * failed attempt to communicate over I2C.
+ */
+ msleep(IQS7222_COMMS_RETRY_MS);
+ return ret;
+ }
+
+ return iqs7222_irq_poll(iqs7222, IQS7222_COMMS_TIMEOUT_MS);
+}
+
+static int iqs7222_read_burst(struct iqs7222_private *iqs7222,
+ u16 reg, void *val, u16 num_val)
+{
+ u8 reg_buf[sizeof(__be16)];
+ int ret, i;
+ struct i2c_client *client = iqs7222->client;
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = reg > U8_MAX ? sizeof(reg) : sizeof(u8),
+ .buf = reg_buf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = num_val * sizeof(__le16),
+ .buf = (u8 *)val,
+ },
+ };
+
+ if (reg > U8_MAX)
+ put_unaligned_be16(reg, reg_buf);
+ else
+ *reg_buf = (u8)reg;
+
+ /*
+ * The following loop protects against an edge case in which the RDY
+ * pin is automatically deasserted just as the read is initiated. In
+ * that case, the read must be retried using forced communication.
+ */
+ for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
+ ret = iqs7222_force_comms(iqs7222);
+ if (ret < 0)
+ continue;
+
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret < (int)ARRAY_SIZE(msg)) {
+ if (ret >= 0)
+ ret = -EIO;
+
+ msleep(IQS7222_COMMS_RETRY_MS);
+ continue;
+ }
+
+ if (get_unaligned_le16(msg[1].buf) == IQS7222_COMMS_ERROR) {
+ ret = -ENODATA;
+ continue;
+ }
+
+ ret = 0;
+ break;
+ }
+
+ /*
+ * The following delay ensures the device has deasserted the RDY pin
+ * following the I2C stop condition.
+ */
+ usleep_range(50, 100);
+
+ if (ret < 0)
+ dev_err(&client->dev,
+ "Failed to read from address 0x%04X: %d\n", reg, ret);
+
+ return ret;
+}
+
+static int iqs7222_read_word(struct iqs7222_private *iqs7222, u16 reg, u16 *val)
+{
+ __le16 val_buf;
+ int error;
+
+ error = iqs7222_read_burst(iqs7222, reg, &val_buf, 1);
+ if (error)
+ return error;
+
+ *val = le16_to_cpu(val_buf);
+
+ return 0;
+}
+
+static int iqs7222_write_burst(struct iqs7222_private *iqs7222,
+ u16 reg, const void *val, u16 num_val)
+{
+ int reg_len = reg > U8_MAX ? sizeof(reg) : sizeof(u8);
+ int val_len = num_val * sizeof(__le16);
+ int msg_len = reg_len + val_len;
+ int ret, i;
+ struct i2c_client *client = iqs7222->client;
+ u8 *msg_buf;
+
+ msg_buf = kzalloc(msg_len, GFP_KERNEL);
+ if (!msg_buf)
+ return -ENOMEM;
+
+ if (reg > U8_MAX)
+ put_unaligned_be16(reg, msg_buf);
+ else
+ *msg_buf = (u8)reg;
+
+ memcpy(msg_buf + reg_len, val, val_len);
+
+ /*
+ * The following loop protects against an edge case in which the RDY
+ * pin is automatically asserted just before the force communication
+ * command is sent.
+ *
+ * In that case, the subsequent I2C stop condition tricks the device
+ * into preemptively deasserting the RDY pin and the command must be
+ * sent again.
+ */
+ for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
+ ret = iqs7222_force_comms(iqs7222);
+ if (ret < 0)
+ continue;
+
+ ret = i2c_master_send(client, msg_buf, msg_len);
+ if (ret < msg_len) {
+ if (ret >= 0)
+ ret = -EIO;
+
+ msleep(IQS7222_COMMS_RETRY_MS);
+ continue;
+ }
+
+ ret = 0;
+ break;
+ }
+
+ kfree(msg_buf);
+
+ usleep_range(50, 100);
+
+ if (ret < 0)
+ dev_err(&client->dev,
+ "Failed to write to address 0x%04X: %d\n", reg, ret);
+
+ return ret;
+}
+
+static int iqs7222_write_word(struct iqs7222_private *iqs7222, u16 reg, u16 val)
+{
+ __le16 val_buf = cpu_to_le16(val);
+
+ return iqs7222_write_burst(iqs7222, reg, &val_buf, 1);
+}
+
+static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222)
+{
+ struct i2c_client *client = iqs7222->client;
+ ktime_t ati_timeout;
+ u16 sys_status = 0;
+ u16 sys_setup;
+ int error, i;
+
+ /*
+ * The reserved fields of the system setup register may have changed
+ * as a result of other registers having been written. As such, read
+ * the register's latest value to avoid unexpected behavior when the
+ * register is written in the loop that follows.
+ */
+ error = iqs7222_read_word(iqs7222, IQS7222_SYS_SETUP, &sys_setup);
+ if (error)
+ return error;
+
+ for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
+ /*
+ * Trigger ATI from streaming and normal-power modes so that
+ * the RDY pin continues to be asserted during ATI.
+ */
+ error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
+ sys_setup |
+ IQS7222_SYS_SETUP_REDO_ATI);
+ if (error)
+ return error;
+
+ ati_timeout = ktime_add_ms(ktime_get(), IQS7222_ATI_TIMEOUT_MS);
+
+ do {
+ error = iqs7222_irq_poll(iqs7222,
+ IQS7222_COMMS_TIMEOUT_MS);
+ if (error)
+ continue;
+
+ error = iqs7222_read_word(iqs7222, IQS7222_SYS_STATUS,
+ &sys_status);
+ if (error)
+ return error;
+
+ if (sys_status & IQS7222_SYS_STATUS_RESET)
+ return 0;
+
+ if (sys_status & IQS7222_SYS_STATUS_ATI_ERROR)
+ break;
+
+ if (sys_status & IQS7222_SYS_STATUS_ATI_ACTIVE)
+ continue;
+
+ /*
+ * Use stream-in-touch mode if either slider reports
+ * absolute position.
+ */
+ sys_setup |= test_bit(EV_ABS, iqs7222->keypad->evbit)
+ ? IQS7222_SYS_SETUP_INTF_MODE_TOUCH
+ : IQS7222_SYS_SETUP_INTF_MODE_EVENT;
+ sys_setup |= IQS7222_SYS_SETUP_PWR_MODE_AUTO;
+
+ return iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
+ sys_setup);
+ } while (ktime_compare(ktime_get(), ati_timeout) < 0);
+
+ dev_err(&client->dev,
+ "ATI attempt %d of %d failed with status 0x%02X, %s\n",
+ i + 1, IQS7222_NUM_RETRIES, (u8)sys_status,
+ i + 1 < IQS7222_NUM_RETRIES ? "retrying" : "stopping");
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir)
+{
+ const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
+ int comms_offset = dev_desc->comms_offset;
+ int error, i, j, k;
+
+ /*
+ * Acknowledge reset before writing any registers in case the device
+ * suffers a spurious reset during initialization. Because this step
+ * may change the reserved fields of the second filter beta register,
+ * its cache must be updated.
+ *
+ * Writing the second filter beta register, in turn, may clobber the
+ * system status register. As such, the filter beta register pair is
+ * written first to protect against this hazard.
+ */
+ if (dir == WRITE) {
+ u16 reg = dev_desc->reg_grps[IQS7222_REG_GRP_FILT].base + 1;
+ u16 filt_setup;
+
+ error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
+ iqs7222->sys_setup[0] |
+ IQS7222_SYS_SETUP_ACK_RESET);
+ if (error)
+ return error;
+
+ error = iqs7222_read_word(iqs7222, reg, &filt_setup);
+ if (error)
+ return error;
+
+ iqs7222->filt_setup[1] &= GENMASK(7, 0);
+ iqs7222->filt_setup[1] |= (filt_setup & ~GENMASK(7, 0));
+ }
+
+ /*
+ * Take advantage of the stop-bit disable function, if available, to
+ * save the trouble of having to reopen a communication window after
+ * each burst read or write.
+ */
+ if (comms_offset) {
+ u16 comms_setup;
+
+ error = iqs7222_read_word(iqs7222,
+ IQS7222_SYS_SETUP + comms_offset,
+ &comms_setup);
+ if (error)
+ return error;
+
+ error = iqs7222_write_word(iqs7222,
+ IQS7222_SYS_SETUP + comms_offset,
+ comms_setup | IQS7222_COMMS_HOLD);
+ if (error)
+ return error;
+ }
+
+ for (i = 0; i < IQS7222_NUM_REG_GRPS; i++) {
+ int num_row = dev_desc->reg_grps[i].num_row;
+ int num_col = dev_desc->reg_grps[i].num_col;
+ u16 reg = dev_desc->reg_grps[i].base;
+ __le16 *val_buf;
+ u16 *val;
+
+ if (!num_col)
+ continue;
+
+ val = iqs7222_setup(iqs7222, i, 0);
+ if (!val)
+ continue;
+
+ val_buf = kcalloc(num_col, sizeof(__le16), GFP_KERNEL);
+ if (!val_buf)
+ return -ENOMEM;
+
+ for (j = 0; j < num_row; j++) {
+ switch (dir) {
+ case READ:
+ error = iqs7222_read_burst(iqs7222, reg,
+ val_buf, num_col);
+ for (k = 0; k < num_col; k++)
+ val[k] = le16_to_cpu(val_buf[k]);
+ break;
+
+ case WRITE:
+ for (k = 0; k < num_col; k++)
+ val_buf[k] = cpu_to_le16(val[k]);
+ error = iqs7222_write_burst(iqs7222, reg,
+ val_buf, num_col);
+ break;
+
+ default:
+ error = -EINVAL;
+ }
+
+ if (error)
+ break;
+
+ reg += IQS7222_REG_OFFSET;
+ val += iqs7222_max_cols[i];
+ }
+
+ kfree(val_buf);
+
+ if (error)
+ return error;
+ }
+
+ if (comms_offset) {
+ u16 comms_setup;
+
+ error = iqs7222_read_word(iqs7222,
+ IQS7222_SYS_SETUP + comms_offset,
+ &comms_setup);
+ if (error)
+ return error;
+
+ error = iqs7222_write_word(iqs7222,
+ IQS7222_SYS_SETUP + comms_offset,
+ comms_setup & ~IQS7222_COMMS_HOLD);
+ if (error)
+ return error;
+ }
+
+ if (dir == READ) {
+ iqs7222->sys_setup[0] &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK;
+ iqs7222->sys_setup[0] &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK;
+ return 0;
+ }
+
+ return iqs7222_ati_trigger(iqs7222);
+}
+
+static int iqs7222_dev_info(struct iqs7222_private *iqs7222)
+{
+ struct i2c_client *client = iqs7222->client;
+ bool prod_num_valid = false;
+ __le16 dev_id[3];
+ int error, i;
+
+ error = iqs7222_read_burst(iqs7222, IQS7222_PROD_NUM, dev_id,
+ ARRAY_SIZE(dev_id));
+ if (error)
+ return error;
+
+ for (i = 0; i < ARRAY_SIZE(iqs7222_devs); i++) {
+ if (le16_to_cpu(dev_id[0]) != iqs7222_devs[i].prod_num)
+ continue;
+
+ prod_num_valid = true;
+
+ if (le16_to_cpu(dev_id[1]) < iqs7222_devs[i].fw_major)
+ continue;
+
+ if (le16_to_cpu(dev_id[2]) < iqs7222_devs[i].fw_minor)
+ continue;
+
+ iqs7222->dev_desc = &iqs7222_devs[i];
+ return 0;
+ }
+
+ if (prod_num_valid)
+ dev_err(&client->dev, "Unsupported firmware revision: %u.%u\n",
+ le16_to_cpu(dev_id[1]), le16_to_cpu(dev_id[2]));
+ else
+ dev_err(&client->dev, "Unrecognized product number: %u\n",
+ le16_to_cpu(dev_id[0]));
+
+ return -EINVAL;
+}
+
+static int iqs7222_gpio_select(struct iqs7222_private *iqs7222,
+ struct fwnode_handle *child_node,
+ int child_enable, u16 child_link)
+{
+ const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
+ struct i2c_client *client = iqs7222->client;
+ int num_gpio = dev_desc->reg_grps[IQS7222_REG_GRP_GPIO].num_row;
+ int error, count, i;
+ unsigned int gpio_sel[ARRAY_SIZE(iqs7222_gpio_links)];
+
+ if (!num_gpio)
+ return 0;
+
+ if (!fwnode_property_present(child_node, "azoteq,gpio-select"))
+ return 0;
+
+ count = fwnode_property_count_u32(child_node, "azoteq,gpio-select");
+ if (count > num_gpio) {
+ dev_err(&client->dev, "Invalid number of %s GPIOs\n",
+ fwnode_get_name(child_node));
+ return -EINVAL;
+ } else if (count < 0) {
+ dev_err(&client->dev, "Failed to count %s GPIOs: %d\n",
+ fwnode_get_name(child_node), count);
+ return count;
+ }
+
+ error = fwnode_property_read_u32_array(child_node,
+ "azoteq,gpio-select",
+ gpio_sel, count);
+ if (error) {
+ dev_err(&client->dev, "Failed to read %s GPIOs: %d\n",
+ fwnode_get_name(child_node), error);
+ return error;
+ }
+
+ for (i = 0; i < count; i++) {
+ u16 *gpio_setup;
+
+ if (gpio_sel[i] >= num_gpio) {
+ dev_err(&client->dev, "Invalid %s GPIO: %u\n",
+ fwnode_get_name(child_node), gpio_sel[i]);
+ return -EINVAL;
+ }
+
+ gpio_setup = iqs7222->gpio_setup[gpio_sel[i]];
+
+ if (gpio_setup[2] && child_link != gpio_setup[2]) {
+ dev_err(&client->dev,
+ "Conflicting GPIO %u event types\n",
+ gpio_sel[i]);
+ return -EINVAL;
+ }
+
+ gpio_setup[0] |= IQS7222_GPIO_SETUP_0_GPIO_EN;
+ gpio_setup[1] |= child_enable;
+ gpio_setup[2] = child_link;
+ }
+
+ return 0;
+}
+
+static int iqs7222_parse_props(struct iqs7222_private *iqs7222,
+ struct fwnode_handle *reg_grp_node,
+ int reg_grp_index,
+ enum iqs7222_reg_grp_id reg_grp,
+ enum iqs7222_reg_key_id reg_key)
+{
+ u16 *setup = iqs7222_setup(iqs7222, reg_grp, reg_grp_index);
+ struct i2c_client *client = iqs7222->client;
+ int i;
+
+ if (!setup)
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(iqs7222_props); i++) {
+ const char *name = iqs7222_props[i].name;
+ int reg_offset = iqs7222_props[i].reg_offset;
+ int reg_shift = iqs7222_props[i].reg_shift;
+ int reg_width = iqs7222_props[i].reg_width;
+ int val_pitch = iqs7222_props[i].val_pitch ? : 1;
+ int val_min = iqs7222_props[i].val_min;
+ int val_max = iqs7222_props[i].val_max;
+ bool invert = iqs7222_props[i].invert;
+ const char *label = iqs7222_props[i].label ? : name;
+ unsigned int val;
+ int error;
+
+ if (iqs7222_props[i].reg_grp != reg_grp ||
+ iqs7222_props[i].reg_key != reg_key)
+ continue;
+
+ /*
+ * Boolean register fields are one bit wide; they are forcibly
+ * reset to provide a means to undo changes by a bootloader if
+ * necessary.
+ *
+ * Scalar fields, on the other hand, are left untouched unless
+ * their corresponding properties are present.
+ */
+ if (reg_width == 1) {
+ if (invert)
+ setup[reg_offset] |= BIT(reg_shift);
+ else
+ setup[reg_offset] &= ~BIT(reg_shift);
+ }
+
+ if (!fwnode_property_present(reg_grp_node, name))
+ continue;
+
+ if (reg_width == 1) {
+ if (invert)
+ setup[reg_offset] &= ~BIT(reg_shift);
+ else
+ setup[reg_offset] |= BIT(reg_shift);
+
+ continue;
+ }
+
+ error = fwnode_property_read_u32(reg_grp_node, name, &val);
+ if (error) {
+ dev_err(&client->dev, "Failed to read %s %s: %d\n",
+ fwnode_get_name(reg_grp_node), label, error);
+ return error;
+ }
+
+ if (!val_max)
+ val_max = GENMASK(reg_width - 1, 0) * val_pitch;
+
+ if (val < val_min || val > val_max) {
+ dev_err(&client->dev, "Invalid %s %s: %u\n",
+ fwnode_get_name(reg_grp_node), label, val);
+ return -EINVAL;
+ }
+
+ setup[reg_offset] &= ~GENMASK(reg_shift + reg_width - 1,
+ reg_shift);
+ setup[reg_offset] |= (val / val_pitch << reg_shift);
+ }
+
+ return 0;
+}
+
+static int iqs7222_parse_event(struct iqs7222_private *iqs7222,
+ struct fwnode_handle *event_node,
+ int reg_grp_index,
+ enum iqs7222_reg_grp_id reg_grp,
+ enum iqs7222_reg_key_id reg_key,
+ u16 event_enable, u16 event_link,
+ unsigned int *event_type,
+ unsigned int *event_code)
+{
+ struct i2c_client *client = iqs7222->client;
+ int error;
+
+ error = iqs7222_parse_props(iqs7222, event_node, reg_grp_index,
+ reg_grp, reg_key);
+ if (error)
+ return error;
+
+ error = iqs7222_gpio_select(iqs7222, event_node, event_enable,
+ event_link);
+ if (error)
+ return error;
+
+ error = fwnode_property_read_u32(event_node, "linux,code", event_code);
+ if (error == -EINVAL) {
+ return 0;
+ } else if (error) {
+ dev_err(&client->dev, "Failed to read %s code: %d\n",
+ fwnode_get_name(event_node), error);
+ return error;
+ }
+
+ if (!event_type) {
+ input_set_capability(iqs7222->keypad, EV_KEY, *event_code);
+ return 0;
+ }
+
+ error = fwnode_property_read_u32(event_node, "linux,input-type",
+ event_type);
+ if (error == -EINVAL) {
+ *event_type = EV_KEY;
+ } else if (error) {
+ dev_err(&client->dev, "Failed to read %s input type: %d\n",
+ fwnode_get_name(event_node), error);
+ return error;
+ } else if (*event_type != EV_KEY && *event_type != EV_SW) {
+ dev_err(&client->dev, "Invalid %s input type: %d\n",
+ fwnode_get_name(event_node), *event_type);
+ return -EINVAL;
+ }
+
+ input_set_capability(iqs7222->keypad, *event_type, *event_code);
+
+ return 0;
+}
+
+static int iqs7222_parse_cycle(struct iqs7222_private *iqs7222,
+ struct fwnode_handle *cycle_node, int cycle_index)
+{
+ u16 *cycle_setup = iqs7222->cycle_setup[cycle_index];
+ struct i2c_client *client = iqs7222->client;
+ unsigned int pins[9];
+ int error, count, i;
+
+ /*
+ * Each channel shares a cycle with one other channel; the mapping of
+ * channels to cycles is fixed. Properties defined for a cycle impact
+ * both channels tied to the cycle.
+ *
+ * Unlike channels which are restricted to a select range of CRx pins
+ * based on channel number, any cycle can claim any of the device's 9
+ * CTx pins (CTx0-8).
+ */
+ if (!fwnode_property_present(cycle_node, "azoteq,tx-enable"))
+ return 0;
+
+ count = fwnode_property_count_u32(cycle_node, "azoteq,tx-enable");
+ if (count < 0) {
+ dev_err(&client->dev, "Failed to count %s CTx pins: %d\n",
+ fwnode_get_name(cycle_node), count);
+ return count;
+ } else if (count > ARRAY_SIZE(pins)) {
+ dev_err(&client->dev, "Invalid number of %s CTx pins\n",
+ fwnode_get_name(cycle_node));
+ return -EINVAL;
+ }
+
+ error = fwnode_property_read_u32_array(cycle_node, "azoteq,tx-enable",
+ pins, count);
+ if (error) {
+ dev_err(&client->dev, "Failed to read %s CTx pins: %d\n",
+ fwnode_get_name(cycle_node), error);
+ return error;
+ }
+
+ cycle_setup[1] &= ~GENMASK(7 + ARRAY_SIZE(pins) - 1, 7);
+
+ for (i = 0; i < count; i++) {
+ if (pins[i] > 8) {
+ dev_err(&client->dev, "Invalid %s CTx pin: %u\n",
+ fwnode_get_name(cycle_node), pins[i]);
+ return -EINVAL;
+ }
+
+ cycle_setup[1] |= BIT(pins[i] + 7);
+ }
+
+ return 0;
+}
+
+static int iqs7222_parse_chan(struct iqs7222_private *iqs7222,
+ struct fwnode_handle *chan_node, int chan_index)
+{
+ const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
+ struct i2c_client *client = iqs7222->client;
+ int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
+ int ext_chan = rounddown(num_chan, 10);
+ int error, i;
+ u16 *chan_setup = iqs7222->chan_setup[chan_index];
+ u16 *sys_setup = iqs7222->sys_setup;
+ unsigned int val;
+
+ if (dev_desc->allow_offset &&
+ fwnode_property_present(chan_node, "azoteq,ulp-allow"))
+ sys_setup[dev_desc->allow_offset] &= ~BIT(chan_index);
+
+ chan_setup[0] |= IQS7222_CHAN_SETUP_0_CHAN_EN;
+
+ /*
+ * The reference channel function allows for differential measurements
+ * and is only available in the case of IQS7222A or IQS7222C.
+ */
+ if (dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_col > 4 &&
+ fwnode_property_present(chan_node, "azoteq,ref-select")) {
+ u16 *ref_setup;
+
+ error = fwnode_property_read_u32(chan_node, "azoteq,ref-select",
+ &val);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s reference channel: %d\n",
+ fwnode_get_name(chan_node), error);
+ return error;
+ }
+
+ if (val >= ext_chan) {
+ dev_err(&client->dev,
+ "Invalid %s reference channel: %u\n",
+ fwnode_get_name(chan_node), val);
+ return -EINVAL;
+ }
+
+ ref_setup = iqs7222->chan_setup[val];
+
+ /*
+ * Configure the current channel as a follower of the selected
+ * reference channel.
+ */
+ chan_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW;
+ chan_setup[4] = val * 42 + 1048;
+
+ error = fwnode_property_read_u32(chan_node, "azoteq,ref-weight",
+ &val);
+ if (!error) {
+ if (val > U16_MAX) {
+ dev_err(&client->dev,
+ "Invalid %s reference weight: %u\n",
+ fwnode_get_name(chan_node), val);
+ return -EINVAL;
+ }
+
+ chan_setup[5] = val;
+ } else if (error != -EINVAL) {
+ dev_err(&client->dev,
+ "Failed to read %s reference weight: %d\n",
+ fwnode_get_name(chan_node), error);
+ return error;
+ }
+
+ /*
+ * Configure the selected channel as a reference channel which
+ * serves the current channel.
+ */
+ ref_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_REF;
+ ref_setup[5] |= BIT(chan_index);
+
+ ref_setup[4] = dev_desc->touch_link;
+ if (fwnode_property_present(chan_node, "azoteq,use-prox"))
+ ref_setup[4] -= 2;
+ }
+
+ if (fwnode_property_present(chan_node, "azoteq,rx-enable")) {
+ /*
+ * Each channel can claim up to 4 CRx pins. The first half of
+ * the channels can use CRx0-3, while the second half can use
+ * CRx4-7.
+ */
+ unsigned int pins[4];
+ int count;
+
+ count = fwnode_property_count_u32(chan_node,
+ "azoteq,rx-enable");
+ if (count < 0) {
+ dev_err(&client->dev,
+ "Failed to count %s CRx pins: %d\n",
+ fwnode_get_name(chan_node), count);
+ return count;
+ } else if (count > ARRAY_SIZE(pins)) {
+ dev_err(&client->dev,
+ "Invalid number of %s CRx pins\n",
+ fwnode_get_name(chan_node));
+ return -EINVAL;
+ }
+
+ error = fwnode_property_read_u32_array(chan_node,
+ "azoteq,rx-enable",
+ pins, count);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to read %s CRx pins: %d\n",
+ fwnode_get_name(chan_node), error);
+ return error;
+ }
+
+ chan_setup[0] &= ~GENMASK(4 + ARRAY_SIZE(pins) - 1, 4);
+
+ for (i = 0; i < count; i++) {
+ int min_crx = chan_index < ext_chan / 2 ? 0 : 4;
+
+ if (pins[i] < min_crx || pins[i] > min_crx + 3) {
+ dev_err(&client->dev,
+ "Invalid %s CRx pin: %u\n",
+ fwnode_get_name(chan_node), pins[i]);
+ return -EINVAL;
+ }
+
+ chan_setup[0] |= BIT(pins[i] + 4 - min_crx);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(iqs7222_kp_events); i++) {
+ const char *event_name = iqs7222_kp_events[i].name;
+ u16 event_enable = iqs7222_kp_events[i].enable;
+ struct fwnode_handle *event_node;
+
+ event_node = fwnode_get_named_child_node(chan_node, event_name);
+ if (!event_node)
+ continue;
+
+ error = fwnode_property_read_u32(event_node,
+ "azoteq,timeout-press-ms",
+ &val);
+ if (!error) {
+ /*
+ * The IQS7222B employs a global pair of press timeout
+ * registers as opposed to channel-specific registers.
+ */
+ u16 *setup = dev_desc->reg_grps
+ [IQS7222_REG_GRP_BTN].num_col > 2 ?
+ &iqs7222->btn_setup[chan_index][2] :
+ &sys_setup[9];
+
+ if (val > U8_MAX * 500) {
+ dev_err(&client->dev,
+ "Invalid %s press timeout: %u\n",
+ fwnode_get_name(event_node), val);
+ fwnode_handle_put(event_node);
+ return -EINVAL;
+ }
+
+ *setup &= ~(U8_MAX << i * 8);
+ *setup |= (val / 500 << i * 8);
+ } else if (error != -EINVAL) {
+ dev_err(&client->dev,
+ "Failed to read %s press timeout: %d\n",
+ fwnode_get_name(event_node), error);
+ fwnode_handle_put(event_node);
+ return error;
+ }
+
+ error = iqs7222_parse_event(iqs7222, event_node, chan_index,
+ IQS7222_REG_GRP_BTN,
+ iqs7222_kp_events[i].reg_key,
+ BIT(chan_index),
+ dev_desc->touch_link - (i ? 0 : 2),
+ &iqs7222->kp_type[chan_index][i],
+ &iqs7222->kp_code[chan_index][i]);
+ fwnode_handle_put(event_node);
+ if (error)
+ return error;
+
+ if (!dev_desc->event_offset)
+ continue;
+
+ sys_setup[dev_desc->event_offset] |= event_enable;
+ }
+
+ /*
+ * The following call handles a special pair of properties that apply
+ * to a channel node, but reside within the button (event) group.
+ */
+ return iqs7222_parse_props(iqs7222, chan_node, chan_index,
+ IQS7222_REG_GRP_BTN,
+ IQS7222_REG_KEY_DEBOUNCE);
+}
+
+static int iqs7222_parse_sldr(struct iqs7222_private *iqs7222,
+ struct fwnode_handle *sldr_node, int sldr_index)
+{
+ const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
+ struct i2c_client *client = iqs7222->client;
+ int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
+ int ext_chan = rounddown(num_chan, 10);
+ int count, error, reg_offset, i;
+ u16 *event_mask = &iqs7222->sys_setup[dev_desc->event_offset];
+ u16 *sldr_setup = iqs7222->sldr_setup[sldr_index];
+ unsigned int chan_sel[4], val;
+
+ /*
+ * Each slider can be spread across 3 to 4 channels. It is possible to
+ * select only 2 channels, but doing so prevents the slider from using
+ * the specified resolution.
+ */
+ count = fwnode_property_count_u32(sldr_node, "azoteq,channel-select");
+ if (count < 0) {
+ dev_err(&client->dev, "Failed to count %s channels: %d\n",
+ fwnode_get_name(sldr_node), count);
+ return count;
+ } else if (count < 3 || count > ARRAY_SIZE(chan_sel)) {
+ dev_err(&client->dev, "Invalid number of %s channels\n",
+ fwnode_get_name(sldr_node));
+ return -EINVAL;
+ }
+
+ error = fwnode_property_read_u32_array(sldr_node,
+ "azoteq,channel-select",
+ chan_sel, count);
+ if (error) {
+ dev_err(&client->dev, "Failed to read %s channels: %d\n",
+ fwnode_get_name(sldr_node), error);
+ return error;
+ }
+
+ /*
+ * Resolution and top speed, if small enough, are packed into a single
+ * register. Otherwise, each occupies its own register and the rest of
+ * the slider-related register addresses are offset by one.
+ */
+ reg_offset = dev_desc->sldr_res < U16_MAX ? 0 : 1;
+
+ sldr_setup[0] |= count;
+ sldr_setup[3 + reg_offset] &= ~GENMASK(ext_chan - 1, 0);
+
+ for (i = 0; i < ARRAY_SIZE(chan_sel); i++) {
+ sldr_setup[5 + reg_offset + i] = 0;
+ if (i >= count)
+ continue;
+
+ if (chan_sel[i] >= ext_chan) {
+ dev_err(&client->dev, "Invalid %s channel: %u\n",
+ fwnode_get_name(sldr_node), chan_sel[i]);
+ return -EINVAL;
+ }
+
+ /*
+ * The following fields indicate which channels participate in
+ * the slider, as well as each channel's relative placement.
+ */
+ sldr_setup[3 + reg_offset] |= BIT(chan_sel[i]);
+ sldr_setup[5 + reg_offset + i] = chan_sel[i] * 42 + 1080;
+ }
+
+ sldr_setup[4 + reg_offset] = dev_desc->touch_link;
+ if (fwnode_property_present(sldr_node, "azoteq,use-prox"))
+ sldr_setup[4 + reg_offset] -= 2;
+
+ error = fwnode_property_read_u32(sldr_node, "azoteq,slider-size", &val);
+ if (!error) {
+ if (val > dev_desc->sldr_res) {
+ dev_err(&client->dev, "Invalid %s size: %u\n",
+ fwnode_get_name(sldr_node), val);
+ return -EINVAL;
+ }
+
+ if (reg_offset) {
+ sldr_setup[3] = val;
+ } else {
+ sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_RES_MASK;
+ sldr_setup[2] |= (val / 16 <<
+ IQS7222_SLDR_SETUP_2_RES_SHIFT);
+ }
+ } else if (error != -EINVAL) {
+ dev_err(&client->dev, "Failed to read %s size: %d\n",
+ fwnode_get_name(sldr_node), error);
+ return error;
+ }
+
+ if (!(reg_offset ? sldr_setup[3]
+ : sldr_setup[2] & IQS7222_SLDR_SETUP_2_RES_MASK)) {
+ dev_err(&client->dev, "Undefined %s size\n",
+ fwnode_get_name(sldr_node));
+ return -EINVAL;
+ }
+
+ error = fwnode_property_read_u32(sldr_node, "azoteq,top-speed", &val);
+ if (!error) {
+ if (val > (reg_offset ? U16_MAX : U8_MAX * 4)) {
+ dev_err(&client->dev, "Invalid %s top speed: %u\n",
+ fwnode_get_name(sldr_node), val);
+ return -EINVAL;
+ }
+
+ if (reg_offset) {
+ sldr_setup[2] = val;
+ } else {
+ sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK;
+ sldr_setup[2] |= (val / 4);
+ }
+ } else if (error != -EINVAL) {
+ dev_err(&client->dev, "Failed to read %s top speed: %d\n",
+ fwnode_get_name(sldr_node), error);
+ return error;
+ }
+
+ error = fwnode_property_read_u32(sldr_node, "linux,axis", &val);
+ if (!error) {
+ u16 sldr_max = sldr_setup[3] - 1;
+
+ if (!reg_offset) {
+ sldr_max = sldr_setup[2];
+
+ sldr_max &= IQS7222_SLDR_SETUP_2_RES_MASK;
+ sldr_max >>= IQS7222_SLDR_SETUP_2_RES_SHIFT;
+
+ sldr_max = sldr_max * 16 - 1;
+ }
+
+ input_set_abs_params(iqs7222->keypad, val, 0, sldr_max, 0, 0);
+ iqs7222->sl_axis[sldr_index] = val;
+ } else if (error != -EINVAL) {
+ dev_err(&client->dev, "Failed to read %s axis: %d\n",
+ fwnode_get_name(sldr_node), error);
+ return error;
+ }
+
+ if (dev_desc->wheel_enable) {
+ sldr_setup[0] &= ~dev_desc->wheel_enable;
+ if (iqs7222->sl_axis[sldr_index] == ABS_WHEEL)
+ sldr_setup[0] |= dev_desc->wheel_enable;
+ }
+
+ /*
+ * The absence of a register offset makes it safe to assume the device
+ * supports gestures, each of which is first disabled until explicitly
+ * enabled.
+ */
+ if (!reg_offset)
+ for (i = 0; i < ARRAY_SIZE(iqs7222_sl_events); i++)
+ sldr_setup[9] &= ~iqs7222_sl_events[i].enable;
+
+ for (i = 0; i < ARRAY_SIZE(iqs7222_sl_events); i++) {
+ const char *event_name = iqs7222_sl_events[i].name;
+ struct fwnode_handle *event_node;
+ enum iqs7222_reg_key_id reg_key;
+
+ event_node = fwnode_get_named_child_node(sldr_node, event_name);
+ if (!event_node)
+ continue;
+
+ /*
+ * Depending on the device, gestures are either offered using
+ * one of two timing resolutions, or are not supported at all.
+ */
+ if (reg_offset)
+ reg_key = IQS7222_REG_KEY_RESERVED;
+ else if (dev_desc->legacy_gesture &&
+ iqs7222_sl_events[i].reg_key == IQS7222_REG_KEY_TAP)
+ reg_key = IQS7222_REG_KEY_TAP_LEGACY;
+ else if (dev_desc->legacy_gesture &&
+ iqs7222_sl_events[i].reg_key == IQS7222_REG_KEY_AXIAL)
+ reg_key = IQS7222_REG_KEY_AXIAL_LEGACY;
+ else
+ reg_key = iqs7222_sl_events[i].reg_key;
+
+ /*
+ * The press/release event does not expose a direct GPIO link,
+ * but one can be emulated by tying each of the participating
+ * channels to the same GPIO.
+ */
+ error = iqs7222_parse_event(iqs7222, event_node, sldr_index,
+ IQS7222_REG_GRP_SLDR, reg_key,
+ i ? iqs7222_sl_events[i].enable
+ : sldr_setup[3 + reg_offset],
+ i ? 1568 + sldr_index * 30
+ : sldr_setup[4 + reg_offset],
+ NULL,
+ &iqs7222->sl_code[sldr_index][i]);
+ fwnode_handle_put(event_node);
+ if (error)
+ return error;
+
+ if (!reg_offset)
+ sldr_setup[9] |= iqs7222_sl_events[i].enable;
+
+ if (!dev_desc->event_offset)
+ continue;
+
+ /*
+ * The press/release event is determined based on whether the
+ * coordinate field reports 0xFFFF and solely relies on touch
+ * or proximity interrupts to be unmasked.
+ */
+ if (i && !reg_offset)
+ *event_mask |= (IQS7222_EVENT_MASK_SLDR << sldr_index);
+ else if (sldr_setup[4 + reg_offset] == dev_desc->touch_link)
+ *event_mask |= IQS7222_EVENT_MASK_TOUCH;
+ else
+ *event_mask |= IQS7222_EVENT_MASK_PROX;
+ }
+
+ /*
+ * The following call handles a special pair of properties that shift
+ * to make room for a wheel enable control in the case of IQS7222C.
+ */
+ return iqs7222_parse_props(iqs7222, sldr_node, sldr_index,
+ IQS7222_REG_GRP_SLDR,
+ dev_desc->wheel_enable ?
+ IQS7222_REG_KEY_WHEEL :
+ IQS7222_REG_KEY_NO_WHEEL);
+}
+
+static int (*iqs7222_parse_extra[IQS7222_NUM_REG_GRPS])
+ (struct iqs7222_private *iqs7222,
+ struct fwnode_handle *reg_grp_node,
+ int reg_grp_index) = {
+ [IQS7222_REG_GRP_CYCLE] = iqs7222_parse_cycle,
+ [IQS7222_REG_GRP_CHAN] = iqs7222_parse_chan,
+ [IQS7222_REG_GRP_SLDR] = iqs7222_parse_sldr,
+};
+
+static int iqs7222_parse_reg_grp(struct iqs7222_private *iqs7222,
+ enum iqs7222_reg_grp_id reg_grp,
+ int reg_grp_index)
+{
+ struct i2c_client *client = iqs7222->client;
+ struct fwnode_handle *reg_grp_node;
+ int error;
+
+ if (iqs7222_reg_grp_names[reg_grp]) {
+ char reg_grp_name[16];
+
+ snprintf(reg_grp_name, sizeof(reg_grp_name), "%s-%d",
+ iqs7222_reg_grp_names[reg_grp], reg_grp_index);
+
+ reg_grp_node = device_get_named_child_node(&client->dev,
+ reg_grp_name);
+ } else {
+ reg_grp_node = fwnode_handle_get(dev_fwnode(&client->dev));
+ }
+
+ if (!reg_grp_node)
+ return 0;
+
+ error = iqs7222_parse_props(iqs7222, reg_grp_node, reg_grp_index,
+ reg_grp, IQS7222_REG_KEY_NONE);
+
+ if (!error && iqs7222_parse_extra[reg_grp])
+ error = iqs7222_parse_extra[reg_grp](iqs7222, reg_grp_node,
+ reg_grp_index);
+
+ fwnode_handle_put(reg_grp_node);
+
+ return error;
+}
+
+static int iqs7222_parse_all(struct iqs7222_private *iqs7222)
+{
+ const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
+ const struct iqs7222_reg_grp_desc *reg_grps = dev_desc->reg_grps;
+ u16 *sys_setup = iqs7222->sys_setup;
+ int error, i, j;
+
+ if (dev_desc->allow_offset)
+ sys_setup[dev_desc->allow_offset] = U16_MAX;
+
+ if (dev_desc->event_offset)
+ sys_setup[dev_desc->event_offset] = IQS7222_EVENT_MASK_ATI;
+
+ for (i = 0; i < reg_grps[IQS7222_REG_GRP_GPIO].num_row; i++) {
+ u16 *gpio_setup = iqs7222->gpio_setup[i];
+
+ gpio_setup[0] &= ~IQS7222_GPIO_SETUP_0_GPIO_EN;
+ gpio_setup[1] = 0;
+ gpio_setup[2] = 0;
+
+ if (reg_grps[IQS7222_REG_GRP_GPIO].num_row == 1)
+ continue;
+
+ /*
+ * The IQS7222C exposes multiple GPIO and must be informed
+ * as to which GPIO this group represents.
+ */
+ for (j = 0; j < ARRAY_SIZE(iqs7222_gpio_links); j++)
+ gpio_setup[0] &= ~BIT(iqs7222_gpio_links[j]);
+
+ gpio_setup[0] |= BIT(iqs7222_gpio_links[i]);
+ }
+
+ for (i = 0; i < reg_grps[IQS7222_REG_GRP_CHAN].num_row; i++) {
+ u16 *chan_setup = iqs7222->chan_setup[i];
+
+ chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_REF_MODE_MASK;
+ chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_CHAN_EN;
+
+ chan_setup[5] = 0;
+ }
+
+ for (i = 0; i < reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) {
+ u16 *sldr_setup = iqs7222->sldr_setup[i];
+
+ sldr_setup[0] &= ~IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK;
+ }
+
+ for (i = 0; i < IQS7222_NUM_REG_GRPS; i++) {
+ for (j = 0; j < reg_grps[i].num_row; j++) {
+ error = iqs7222_parse_reg_grp(iqs7222, i, j);
+ if (error)
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+static int iqs7222_report(struct iqs7222_private *iqs7222)
+{
+ const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
+ struct i2c_client *client = iqs7222->client;
+ int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
+ int num_stat = dev_desc->reg_grps[IQS7222_REG_GRP_STAT].num_col;
+ int error, i, j;
+ __le16 status[IQS7222_MAX_COLS_STAT];
+
+ error = iqs7222_read_burst(iqs7222, IQS7222_SYS_STATUS, status,
+ num_stat);
+ if (error)
+ return error;
+
+ if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_RESET) {
+ dev_err(&client->dev, "Unexpected device reset\n");
+ return iqs7222_dev_init(iqs7222, WRITE);
+ }
+
+ if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_ATI_ERROR) {
+ dev_err(&client->dev, "Unexpected ATI error\n");
+ return iqs7222_ati_trigger(iqs7222);
+ }
+
+ if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_ATI_ACTIVE)
+ return 0;
+
+ for (i = 0; i < num_chan; i++) {
+ u16 *chan_setup = iqs7222->chan_setup[i];
+
+ if (!(chan_setup[0] & IQS7222_CHAN_SETUP_0_CHAN_EN))
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(iqs7222_kp_events); j++) {
+ /*
+ * Proximity state begins at offset 2 and spills into
+ * offset 3 for devices with more than 16 channels.
+ *
+ * Touch state begins at the first offset immediately
+ * following proximity state.
+ */
+ int k = 2 + j * (num_chan > 16 ? 2 : 1);
+ u16 state = le16_to_cpu(status[k + i / 16]);
+
+ if (!iqs7222->kp_type[i][j])
+ continue;
+
+ input_event(iqs7222->keypad,
+ iqs7222->kp_type[i][j],
+ iqs7222->kp_code[i][j],
+ !!(state & BIT(i % 16)));
+ }
+ }
+
+ for (i = 0; i < dev_desc->reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) {
+ u16 *sldr_setup = iqs7222->sldr_setup[i];
+ u16 sldr_pos = le16_to_cpu(status[4 + i]);
+ u16 state = le16_to_cpu(status[6 + i]);
+
+ if (!(sldr_setup[0] & IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK))
+ continue;
+
+ if (sldr_pos < dev_desc->sldr_res)
+ input_report_abs(iqs7222->keypad, iqs7222->sl_axis[i],
+ sldr_pos);
+
+ input_report_key(iqs7222->keypad, iqs7222->sl_code[i][0],
+ sldr_pos < dev_desc->sldr_res);
+
+ /*
+ * A maximum resolution indicates the device does not support
+ * gestures, in which case the remaining fields are ignored.
+ */
+ if (dev_desc->sldr_res == U16_MAX)
+ continue;
+
+ if (!(le16_to_cpu(status[1]) & IQS7222_EVENT_MASK_SLDR << i))
+ continue;
+
+ /*
+ * Skip the press/release event, as it does not have separate
+ * status fields and is handled separately.
+ */
+ for (j = 1; j < ARRAY_SIZE(iqs7222_sl_events); j++) {
+ u16 mask = iqs7222_sl_events[j].mask;
+ u16 val = iqs7222_sl_events[j].val;
+
+ input_report_key(iqs7222->keypad,
+ iqs7222->sl_code[i][j],
+ (state & mask) == val);
+ }
+
+ input_sync(iqs7222->keypad);
+
+ for (j = 1; j < ARRAY_SIZE(iqs7222_sl_events); j++)
+ input_report_key(iqs7222->keypad,
+ iqs7222->sl_code[i][j], 0);
+ }
+
+ input_sync(iqs7222->keypad);
+
+ return 0;
+}
+
+static irqreturn_t iqs7222_irq(int irq, void *context)
+{
+ struct iqs7222_private *iqs7222 = context;
+
+ return iqs7222_report(iqs7222) ? IRQ_NONE : IRQ_HANDLED;
+}
+
+static int iqs7222_probe(struct i2c_client *client)
+{
+ struct iqs7222_private *iqs7222;
+ unsigned long irq_flags;
+ int error, irq;
+
+ iqs7222 = devm_kzalloc(&client->dev, sizeof(*iqs7222), GFP_KERNEL);
+ if (!iqs7222)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, iqs7222);
+ iqs7222->client = client;
+
+ iqs7222->keypad = devm_input_allocate_device(&client->dev);
+ if (!iqs7222->keypad)
+ return -ENOMEM;
+
+ iqs7222->keypad->name = client->name;
+ iqs7222->keypad->id.bustype = BUS_I2C;
+
+ /*
+ * The RDY pin behaves as an interrupt, but must also be polled ahead
+ * of unsolicited I2C communication. As such, it is first opened as a
+ * GPIO and then passed to gpiod_to_irq() to register the interrupt.
+ */
+ iqs7222->irq_gpio = devm_gpiod_get(&client->dev, "irq", GPIOD_IN);
+ if (IS_ERR(iqs7222->irq_gpio)) {
+ error = PTR_ERR(iqs7222->irq_gpio);
+ dev_err(&client->dev, "Failed to request IRQ GPIO: %d\n",
+ error);
+ return error;
+ }
+
+ iqs7222->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(iqs7222->reset_gpio)) {
+ error = PTR_ERR(iqs7222->reset_gpio);
+ dev_err(&client->dev, "Failed to request reset GPIO: %d\n",
+ error);
+ return error;
+ }
+
+ error = iqs7222_hard_reset(iqs7222);
+ if (error)
+ return error;
+
+ error = iqs7222_dev_info(iqs7222);
+ if (error)
+ return error;
+
+ error = iqs7222_dev_init(iqs7222, READ);
+ if (error)
+ return error;
+
+ error = iqs7222_parse_all(iqs7222);
+ if (error)
+ return error;
+
+ error = iqs7222_dev_init(iqs7222, WRITE);
+ if (error)
+ return error;
+
+ error = iqs7222_report(iqs7222);
+ if (error)
+ return error;
+
+ error = input_register_device(iqs7222->keypad);
+ if (error) {
+ dev_err(&client->dev, "Failed to register device: %d\n", error);
+ return error;
+ }
+
+ irq = gpiod_to_irq(iqs7222->irq_gpio);
+ if (irq < 0)
+ return irq;
+
+ irq_flags = gpiod_is_active_low(iqs7222->irq_gpio) ? IRQF_TRIGGER_LOW
+ : IRQF_TRIGGER_HIGH;
+ irq_flags |= IRQF_ONESHOT;
+
+ error = devm_request_threaded_irq(&client->dev, irq, NULL, iqs7222_irq,
+ irq_flags, client->name, iqs7222);
+ if (error)
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+
+ return error;
+}
+
+static const struct of_device_id iqs7222_of_match[] = {
+ { .compatible = "azoteq,iqs7222a" },
+ { .compatible = "azoteq,iqs7222b" },
+ { .compatible = "azoteq,iqs7222c" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, iqs7222_of_match);
+
+static struct i2c_driver iqs7222_i2c_driver = {
+ .driver = {
+ .name = "iqs7222",
+ .of_match_table = iqs7222_of_match,
+ },
+ .probe_new = iqs7222_probe,
+};
+module_i2c_driver(iqs7222_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS7222A/B/C Capacitive Touch Controller");
+MODULE_LICENSE("GPL");