diff options
Diffstat (limited to 'drivers/input/misc/pmic8xxx-pwrkey.c')
| -rw-r--r-- | drivers/input/misc/pmic8xxx-pwrkey.c | 454 |
1 files changed, 454 insertions, 0 deletions
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c new file mode 100644 index 000000000..0e818a3d2 --- /dev/null +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -0,0 +1,454 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/log2.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#define PON_CNTL_1 0x1C +#define PON_CNTL_PULL_UP BIT(7) +#define PON_CNTL_TRIG_DELAY_MASK (0x7) +#define PON_CNTL_1_PULL_UP_EN 0xe0 +#define PON_CNTL_1_USB_PWR_EN 0x10 +#define PON_CNTL_1_WD_EN_RESET 0x08 + +#define PM8058_SLEEP_CTRL 0x02b +#define PM8921_SLEEP_CTRL 0x10a + +#define SLEEP_CTRL_SMPL_EN_RESET 0x04 + +/* Regulator master enable addresses */ +#define REG_PM8058_VREG_EN_MSM 0x018 +#define REG_PM8058_VREG_EN_GRP_5_4 0x1c8 + +/* Regulator control registers for shutdown/reset */ +#define PM8058_S0_CTRL 0x004 +#define PM8058_S1_CTRL 0x005 +#define PM8058_S3_CTRL 0x111 +#define PM8058_L21_CTRL 0x120 +#define PM8058_L22_CTRL 0x121 + +#define PM8058_REGULATOR_ENABLE_MASK 0x80 +#define PM8058_REGULATOR_ENABLE 0x80 +#define PM8058_REGULATOR_DISABLE 0x00 +#define PM8058_REGULATOR_PULL_DOWN_MASK 0x40 +#define PM8058_REGULATOR_PULL_DOWN_EN 0x40 + +/* Buck CTRL register */ +#define PM8058_SMPS_LEGACY_VREF_SEL 0x20 +#define PM8058_SMPS_LEGACY_VPROG_MASK 0x1f +#define PM8058_SMPS_ADVANCED_BAND_MASK 0xC0 +#define PM8058_SMPS_ADVANCED_BAND_SHIFT 6 +#define PM8058_SMPS_ADVANCED_VPROG_MASK 0x3f + +/* Buck TEST2 registers for shutdown/reset */ +#define PM8058_S0_TEST2 0x084 +#define PM8058_S1_TEST2 0x085 +#define PM8058_S3_TEST2 0x11a + +#define PM8058_REGULATOR_BANK_WRITE 0x80 +#define PM8058_REGULATOR_BANK_MASK 0x70 +#define PM8058_REGULATOR_BANK_SHIFT 4 +#define PM8058_REGULATOR_BANK_SEL(n) ((n) << PM8058_REGULATOR_BANK_SHIFT) + +/* Buck TEST2 register bank 1 */ +#define PM8058_SMPS_LEGACY_VLOW_SEL 0x01 + +/* Buck TEST2 register bank 7 */ +#define PM8058_SMPS_ADVANCED_MODE_MASK 0x02 +#define PM8058_SMPS_ADVANCED_MODE 0x02 +#define PM8058_SMPS_LEGACY_MODE 0x00 + +/** + * struct pmic8xxx_pwrkey - pmic8xxx pwrkey information + * @key_press_irq: key press irq number + * @regmap: device regmap + * @shutdown_fn: shutdown configuration function + */ +struct pmic8xxx_pwrkey { + int key_press_irq; + struct regmap *regmap; + int (*shutdown_fn)(struct pmic8xxx_pwrkey *, bool); +}; + +static irqreturn_t pwrkey_press_irq(int irq, void *_pwr) +{ + struct input_dev *pwr = _pwr; + + input_report_key(pwr, KEY_POWER, 1); + input_sync(pwr); + + return IRQ_HANDLED; +} + +static irqreturn_t pwrkey_release_irq(int irq, void *_pwr) +{ + struct input_dev *pwr = _pwr; + + input_report_key(pwr, KEY_POWER, 0); + input_sync(pwr); + + return IRQ_HANDLED; +} + +static int __maybe_unused pmic8xxx_pwrkey_suspend(struct device *dev) +{ + struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(pwrkey->key_press_irq); + + return 0; +} + +static int __maybe_unused pmic8xxx_pwrkey_resume(struct device *dev) +{ + struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(pwrkey->key_press_irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(pm8xxx_pwr_key_pm_ops, + pmic8xxx_pwrkey_suspend, pmic8xxx_pwrkey_resume); + +static void pmic8xxx_pwrkey_shutdown(struct platform_device *pdev) +{ + struct pmic8xxx_pwrkey *pwrkey = platform_get_drvdata(pdev); + int error; + u8 mask, val; + bool reset = system_state == SYSTEM_RESTART; + + if (pwrkey->shutdown_fn) { + error = pwrkey->shutdown_fn(pwrkey, reset); + if (error) + return; + } + + /* + * Select action to perform (reset or shutdown) when PS_HOLD goes low. + * Also ensure that KPD, CBL0, and CBL1 pull ups are enabled and that + * USB charging is enabled. + */ + mask = PON_CNTL_1_PULL_UP_EN | PON_CNTL_1_USB_PWR_EN; + mask |= PON_CNTL_1_WD_EN_RESET; + val = mask; + if (!reset) + val &= ~PON_CNTL_1_WD_EN_RESET; + + regmap_update_bits(pwrkey->regmap, PON_CNTL_1, mask, val); +} + +/* + * Set an SMPS regulator to be disabled in its CTRL register, but enabled + * in the master enable register. Also set it's pull down enable bit. + * Take care to make sure that the output voltage doesn't change if switching + * from advanced mode to legacy mode. + */ +static int pm8058_disable_smps_locally_set_pull_down(struct regmap *regmap, + u16 ctrl_addr, u16 test2_addr, u16 master_enable_addr, + u8 master_enable_bit) +{ + int error; + u8 vref_sel, vlow_sel, band, vprog, bank; + unsigned int reg; + + bank = PM8058_REGULATOR_BANK_SEL(7); + error = regmap_write(regmap, test2_addr, bank); + if (error) + return error; + + error = regmap_read(regmap, test2_addr, ®); + if (error) + return error; + + reg &= PM8058_SMPS_ADVANCED_MODE_MASK; + /* Check if in advanced mode. */ + if (reg == PM8058_SMPS_ADVANCED_MODE) { + /* Determine current output voltage. */ + error = regmap_read(regmap, ctrl_addr, ®); + if (error) + return error; + + band = reg & PM8058_SMPS_ADVANCED_BAND_MASK; + band >>= PM8058_SMPS_ADVANCED_BAND_SHIFT; + switch (band) { + case 3: + vref_sel = 0; + vlow_sel = 0; + break; + case 2: + vref_sel = PM8058_SMPS_LEGACY_VREF_SEL; + vlow_sel = 0; + break; + case 1: + vref_sel = PM8058_SMPS_LEGACY_VREF_SEL; + vlow_sel = PM8058_SMPS_LEGACY_VLOW_SEL; + break; + default: + pr_err("%s: regulator already disabled\n", __func__); + return -EPERM; + } + vprog = reg & PM8058_SMPS_ADVANCED_VPROG_MASK; + /* Round up if fine step is in use. */ + vprog = (vprog + 1) >> 1; + if (vprog > PM8058_SMPS_LEGACY_VPROG_MASK) + vprog = PM8058_SMPS_LEGACY_VPROG_MASK; + + /* Set VLOW_SEL bit. */ + bank = PM8058_REGULATOR_BANK_SEL(1); + error = regmap_write(regmap, test2_addr, bank); + if (error) + return error; + + error = regmap_update_bits(regmap, test2_addr, + PM8058_REGULATOR_BANK_WRITE | PM8058_REGULATOR_BANK_MASK + | PM8058_SMPS_LEGACY_VLOW_SEL, + PM8058_REGULATOR_BANK_WRITE | + PM8058_REGULATOR_BANK_SEL(1) | vlow_sel); + if (error) + return error; + + /* Switch to legacy mode */ + bank = PM8058_REGULATOR_BANK_SEL(7); + error = regmap_write(regmap, test2_addr, bank); + if (error) + return error; + + error = regmap_update_bits(regmap, test2_addr, + PM8058_REGULATOR_BANK_WRITE | + PM8058_REGULATOR_BANK_MASK | + PM8058_SMPS_ADVANCED_MODE_MASK, + PM8058_REGULATOR_BANK_WRITE | + PM8058_REGULATOR_BANK_SEL(7) | + PM8058_SMPS_LEGACY_MODE); + if (error) + return error; + + /* Enable locally, enable pull down, keep voltage the same. */ + error = regmap_update_bits(regmap, ctrl_addr, + PM8058_REGULATOR_ENABLE_MASK | + PM8058_REGULATOR_PULL_DOWN_MASK | + PM8058_SMPS_LEGACY_VREF_SEL | + PM8058_SMPS_LEGACY_VPROG_MASK, + PM8058_REGULATOR_ENABLE | PM8058_REGULATOR_PULL_DOWN_EN + | vref_sel | vprog); + if (error) + return error; + } + + /* Enable in master control register. */ + error = regmap_update_bits(regmap, master_enable_addr, + master_enable_bit, master_enable_bit); + if (error) + return error; + + /* Disable locally and enable pull down. */ + return regmap_update_bits(regmap, ctrl_addr, + PM8058_REGULATOR_ENABLE_MASK | PM8058_REGULATOR_PULL_DOWN_MASK, + PM8058_REGULATOR_DISABLE | PM8058_REGULATOR_PULL_DOWN_EN); +} + +static int pm8058_disable_ldo_locally_set_pull_down(struct regmap *regmap, + u16 ctrl_addr, u16 master_enable_addr, u8 master_enable_bit) +{ + int error; + + /* Enable LDO in master control register. */ + error = regmap_update_bits(regmap, master_enable_addr, + master_enable_bit, master_enable_bit); + if (error) + return error; + + /* Disable LDO in CTRL register and set pull down */ + return regmap_update_bits(regmap, ctrl_addr, + PM8058_REGULATOR_ENABLE_MASK | PM8058_REGULATOR_PULL_DOWN_MASK, + PM8058_REGULATOR_DISABLE | PM8058_REGULATOR_PULL_DOWN_EN); +} + +static int pm8058_pwrkey_shutdown(struct pmic8xxx_pwrkey *pwrkey, bool reset) +{ + int error; + struct regmap *regmap = pwrkey->regmap; + u8 mask, val; + + /* When shutting down, enable active pulldowns on important rails. */ + if (!reset) { + /* Disable SMPS's 0,1,3 locally and set pulldown enable bits. */ + pm8058_disable_smps_locally_set_pull_down(regmap, + PM8058_S0_CTRL, PM8058_S0_TEST2, + REG_PM8058_VREG_EN_MSM, BIT(7)); + pm8058_disable_smps_locally_set_pull_down(regmap, + PM8058_S1_CTRL, PM8058_S1_TEST2, + REG_PM8058_VREG_EN_MSM, BIT(6)); + pm8058_disable_smps_locally_set_pull_down(regmap, + PM8058_S3_CTRL, PM8058_S3_TEST2, + REG_PM8058_VREG_EN_GRP_5_4, BIT(7) | BIT(4)); + /* Disable LDO 21 locally and set pulldown enable bit. */ + pm8058_disable_ldo_locally_set_pull_down(regmap, + PM8058_L21_CTRL, REG_PM8058_VREG_EN_GRP_5_4, + BIT(1)); + } + + /* + * Fix-up: Set regulator LDO22 to 1.225 V in high power mode. Leave its + * pull-down state intact. This ensures a safe shutdown. + */ + error = regmap_update_bits(regmap, PM8058_L22_CTRL, 0xbf, 0x93); + if (error) + return error; + + /* Enable SMPL if resetting is desired */ + mask = SLEEP_CTRL_SMPL_EN_RESET; + val = 0; + if (reset) + val = mask; + return regmap_update_bits(regmap, PM8058_SLEEP_CTRL, mask, val); +} + +static int pm8921_pwrkey_shutdown(struct pmic8xxx_pwrkey *pwrkey, bool reset) +{ + struct regmap *regmap = pwrkey->regmap; + u8 mask = SLEEP_CTRL_SMPL_EN_RESET; + u8 val = 0; + + /* Enable SMPL if resetting is desired */ + if (reset) + val = mask; + return regmap_update_bits(regmap, PM8921_SLEEP_CTRL, mask, val); +} + +static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) +{ + struct input_dev *pwr; + int key_release_irq = platform_get_irq(pdev, 0); + int key_press_irq = platform_get_irq(pdev, 1); + int err; + unsigned int delay; + unsigned int pon_cntl; + struct regmap *regmap; + struct pmic8xxx_pwrkey *pwrkey; + u32 kpd_delay; + bool pull_up; + + if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay)) + kpd_delay = 15625; + + /* Valid range of pwr key trigger delay is 1/64 sec to 2 seconds. */ + if (kpd_delay > USEC_PER_SEC * 2 || kpd_delay < USEC_PER_SEC / 64) { + dev_err(&pdev->dev, "invalid power key trigger delay\n"); + return -EINVAL; + } + + pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up"); + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { + dev_err(&pdev->dev, "failed to locate regmap for the device\n"); + return -ENODEV; + } + + pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL); + if (!pwrkey) + return -ENOMEM; + + pwrkey->shutdown_fn = of_device_get_match_data(&pdev->dev); + pwrkey->regmap = regmap; + pwrkey->key_press_irq = key_press_irq; + + pwr = devm_input_allocate_device(&pdev->dev); + if (!pwr) { + dev_dbg(&pdev->dev, "Can't allocate power button\n"); + return -ENOMEM; + } + + input_set_capability(pwr, EV_KEY, KEY_POWER); + + pwr->name = "pmic8xxx_pwrkey"; + pwr->phys = "pmic8xxx_pwrkey/input0"; + + delay = (kpd_delay << 6) / USEC_PER_SEC; + delay = ilog2(delay); + + err = regmap_read(regmap, PON_CNTL_1, &pon_cntl); + if (err < 0) { + dev_err(&pdev->dev, "failed reading PON_CNTL_1 err=%d\n", err); + return err; + } + + pon_cntl &= ~PON_CNTL_TRIG_DELAY_MASK; + pon_cntl |= (delay & PON_CNTL_TRIG_DELAY_MASK); + if (pull_up) + pon_cntl |= PON_CNTL_PULL_UP; + else + pon_cntl &= ~PON_CNTL_PULL_UP; + + err = regmap_write(regmap, PON_CNTL_1, pon_cntl); + if (err < 0) { + dev_err(&pdev->dev, "failed writing PON_CNTL_1 err=%d\n", err); + return err; + } + + err = devm_request_irq(&pdev->dev, key_press_irq, pwrkey_press_irq, + IRQF_TRIGGER_RISING, + "pmic8xxx_pwrkey_press", pwr); + if (err) { + dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n", + key_press_irq, err); + return err; + } + + err = devm_request_irq(&pdev->dev, key_release_irq, pwrkey_release_irq, + IRQF_TRIGGER_RISING, + "pmic8xxx_pwrkey_release", pwr); + if (err) { + dev_err(&pdev->dev, "Can't get %d IRQ for pwrkey: %d\n", + key_release_irq, err); + return err; + } + + err = input_register_device(pwr); + if (err) { + dev_err(&pdev->dev, "Can't register power key: %d\n", err); + return err; + } + + platform_set_drvdata(pdev, pwrkey); + device_init_wakeup(&pdev->dev, 1); + + return 0; +} + +static const struct of_device_id pm8xxx_pwr_key_id_table[] = { + { .compatible = "qcom,pm8058-pwrkey", .data = &pm8058_pwrkey_shutdown }, + { .compatible = "qcom,pm8921-pwrkey", .data = &pm8921_pwrkey_shutdown }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8xxx_pwr_key_id_table); + +static struct platform_driver pmic8xxx_pwrkey_driver = { + .probe = pmic8xxx_pwrkey_probe, + .shutdown = pmic8xxx_pwrkey_shutdown, + .driver = { + .name = "pm8xxx-pwrkey", + .pm = &pm8xxx_pwr_key_pm_ops, + .of_match_table = pm8xxx_pwr_key_id_table, + }, +}; +module_platform_driver(pmic8xxx_pwrkey_driver); + +MODULE_ALIAS("platform:pmic8xxx_pwrkey"); +MODULE_DESCRIPTION("PMIC8XXX Power Key driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>"); |