diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/input/mouse/logibm.c | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c new file mode 100644 index 000000000..0aab63dbc --- /dev/null +++ b/drivers/input/mouse/logibm.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 1999-2001 Vojtech Pavlik + * + * Based on the work of: + * James Banks Matthew Dillon + * David Giller Nathan Laredo + * Linus Torvalds Johan Myreen + * Cliff Matthews Philip Blundell + * Russell King + */ + +/* + * Logitech Bus Mouse Driver for Linux + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> + +#include <asm/io.h> +#include <asm/irq.h> + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION("Logitech busmouse driver"); +MODULE_LICENSE("GPL"); + +#define LOGIBM_BASE 0x23c +#define LOGIBM_EXTENT 4 + +#define LOGIBM_DATA_PORT LOGIBM_BASE + 0 +#define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1 +#define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2 +#define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3 + +#define LOGIBM_ENABLE_IRQ 0x00 +#define LOGIBM_DISABLE_IRQ 0x10 +#define LOGIBM_READ_X_LOW 0x80 +#define LOGIBM_READ_X_HIGH 0xa0 +#define LOGIBM_READ_Y_LOW 0xc0 +#define LOGIBM_READ_Y_HIGH 0xe0 + +#define LOGIBM_DEFAULT_MODE 0x90 +#define LOGIBM_CONFIG_BYTE 0x91 +#define LOGIBM_SIGNATURE_BYTE 0xa5 + +#define LOGIBM_IRQ 5 + +static int logibm_irq = LOGIBM_IRQ; +module_param_hw_named(irq, logibm_irq, uint, irq, 0); +MODULE_PARM_DESC(irq, "IRQ number (5=default)"); + +static struct input_dev *logibm_dev; + +static irqreturn_t logibm_interrupt(int irq, void *dev_id) +{ + char dx, dy; + unsigned char buttons; + + outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT); + dx = (inb(LOGIBM_DATA_PORT) & 0xf); + outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT); + dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4; + outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT); + dy = (inb(LOGIBM_DATA_PORT) & 0xf); + outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT); + buttons = inb(LOGIBM_DATA_PORT); + dy |= (buttons & 0xf) << 4; + buttons = ~buttons >> 5; + + input_report_rel(logibm_dev, REL_X, dx); + input_report_rel(logibm_dev, REL_Y, dy); + input_report_key(logibm_dev, BTN_RIGHT, buttons & 1); + input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2); + input_report_key(logibm_dev, BTN_LEFT, buttons & 4); + input_sync(logibm_dev); + + outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); + return IRQ_HANDLED; +} + +static int logibm_open(struct input_dev *dev) +{ + if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { + printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); + return -EBUSY; + } + outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); + return 0; +} + +static void logibm_close(struct input_dev *dev) +{ + outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); + free_irq(logibm_irq, NULL); +} + +static int __init logibm_init(void) +{ + int err; + + if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { + printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE); + return -EBUSY; + } + + outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT); + outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT); + udelay(100); + + if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) { + printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); + err = -ENODEV; + goto err_release_region; + } + + outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); + outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); + + logibm_dev = input_allocate_device(); + if (!logibm_dev) { + printk(KERN_ERR "logibm.c: Not enough memory for input device\n"); + err = -ENOMEM; + goto err_release_region; + } + + logibm_dev->name = "Logitech bus mouse"; + logibm_dev->phys = "isa023c/input0"; + logibm_dev->id.bustype = BUS_ISA; + logibm_dev->id.vendor = 0x0003; + logibm_dev->id.product = 0x0001; + logibm_dev->id.version = 0x0100; + + logibm_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); + logibm_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | + BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); + logibm_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); + + logibm_dev->open = logibm_open; + logibm_dev->close = logibm_close; + + err = input_register_device(logibm_dev); + if (err) + goto err_free_dev; + + return 0; + + err_free_dev: + input_free_device(logibm_dev); + err_release_region: + release_region(LOGIBM_BASE, LOGIBM_EXTENT); + + return err; +} + +static void __exit logibm_exit(void) +{ + input_unregister_device(logibm_dev); + release_region(LOGIBM_BASE, LOGIBM_EXTENT); +} + +module_init(logibm_init); +module_exit(logibm_exit); |