diff options
Diffstat (limited to 'drivers/input/serio/ams_delta_serio.c')
| -rw-r--r-- | drivers/input/serio/ams_delta_serio.c | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c new file mode 100644 index 000000000..ec93cb457 --- /dev/null +++ b/drivers/input/serio/ams_delta_serio.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Amstrad E3 (Delta) keyboard port driver + * + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * Thanks to Cliff Lawson for his help + * + * The Amstrad Delta keyboard (aka mailboard) uses normal PC-AT style serial + * transmission. The keyboard port is formed of two GPIO lines, for clock + * and data. Due to strict timing requirements of the interface, + * the serial data stream is read and processed by a FIQ handler. + * The resulting words are fetched by this driver from a circular buffer. + * + * Standard AT keyboard driver (atkbd) is used for handling the keyboard data. + * However, when used with the E3 mailboard that producecs non-standard + * scancodes, a custom key table must be prepared and loaded from userspace. + */ +#include <linux/irq.h> +#include <linux/platform_data/ams-delta-fiq.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/serio.h> +#include <linux/slab.h> +#include <linux/module.h> + +#define DRIVER_NAME "ams-delta-serio" + +MODULE_AUTHOR("Matt Callow"); +MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver"); +MODULE_LICENSE("GPL"); + +struct ams_delta_serio { + struct serio *serio; + struct regulator *vcc; + unsigned int *fiq_buffer; +}; + +static int check_data(struct serio *serio, int data) +{ + int i, parity = 0; + + /* check valid stop bit */ + if (!(data & 0x400)) { + dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data); + return SERIO_FRAME; + } + /* calculate the parity */ + for (i = 1; i < 10; i++) { + if (data & (1 << i)) + parity++; + } + /* it should be odd */ + if (!(parity & 0x01)) { + dev_warn(&serio->dev, + "parity check failed, data=0x%X parity=0x%X\n", data, + parity); + return SERIO_PARITY; + } + return 0; +} + +static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) +{ + struct ams_delta_serio *priv = dev_id; + int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF]; + int data, dfl; + u8 scancode; + + priv->fiq_buffer[FIQ_IRQ_PEND] = 0; + + /* + * Read data from the circular buffer, check it + * and then pass it on the serio + */ + while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) { + + data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++]; + priv->fiq_buffer[FIQ_KEYS_CNT]--; + if (priv->fiq_buffer[FIQ_HEAD_OFFSET] == + priv->fiq_buffer[FIQ_BUF_LEN]) + priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0; + + dfl = check_data(priv->serio, data); + scancode = (u8) (data >> 1) & 0xFF; + serio_interrupt(priv->serio, scancode, dfl); + } + return IRQ_HANDLED; +} + +static int ams_delta_serio_open(struct serio *serio) +{ + struct ams_delta_serio *priv = serio->port_data; + + /* enable keyboard */ + return regulator_enable(priv->vcc); +} + +static void ams_delta_serio_close(struct serio *serio) +{ + struct ams_delta_serio *priv = serio->port_data; + + /* disable keyboard */ + regulator_disable(priv->vcc); +} + +static int ams_delta_serio_init(struct platform_device *pdev) +{ + struct ams_delta_serio *priv; + struct serio *serio; + int irq, err; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->fiq_buffer = pdev->dev.platform_data; + if (!priv->fiq_buffer) + return -EINVAL; + + priv->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(priv->vcc)) { + err = PTR_ERR(priv->vcc); + dev_err(&pdev->dev, "regulator request failed (%d)\n", err); + /* + * When running on a non-dt platform and requested regulator + * is not available, devm_regulator_get() never returns + * -EPROBE_DEFER as it is not able to justify if the regulator + * may still appear later. On the other hand, the board can + * still set full constriants flag at late_initcall in order + * to instruct devm_regulator_get() to returnn a dummy one + * if sufficient. Hence, if we get -ENODEV here, let's convert + * it to -EPROBE_DEFER and wait for the board to decide or + * let Deferred Probe infrastructure handle this error. + */ + if (err == -ENODEV) + err = -EPROBE_DEFER; + return err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENXIO; + + err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt, + IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv); + if (err < 0) { + dev_err(&pdev->dev, "IRQ request failed (%d)\n", err); + return err; + } + + serio = kzalloc(sizeof(*serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + priv->serio = serio; + + serio->id.type = SERIO_8042; + serio->open = ams_delta_serio_open; + serio->close = ams_delta_serio_close; + strscpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name)); + strscpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys)); + serio->dev.parent = &pdev->dev; + serio->port_data = priv; + + serio_register_port(serio); + + platform_set_drvdata(pdev, priv); + + dev_info(&serio->dev, "%s\n", serio->name); + + return 0; +} + +static int ams_delta_serio_exit(struct platform_device *pdev) +{ + struct ams_delta_serio *priv = platform_get_drvdata(pdev); + + serio_unregister_port(priv->serio); + + return 0; +} + +static struct platform_driver ams_delta_serio_driver = { + .probe = ams_delta_serio_init, + .remove = ams_delta_serio_exit, + .driver = { + .name = DRIVER_NAME + }, +}; +module_platform_driver(ams_delta_serio_driver); |