summaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen/goodix.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
-rw-r--r--drivers/input/touchscreen/goodix.c1582
1 files changed, 1582 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
new file mode 100644
index 000000000..3f0732db7
--- /dev/null
+++ b/drivers/input/touchscreen/goodix.c
@@ -0,0 +1,1582 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Goodix Touchscreens
+ *
+ * Copyright (c) 2014 Red Hat Inc.
+ * Copyright (c) 2015 K. Merker <merker@debian.org>
+ *
+ * This code is based on gt9xx.c authored by andrew@goodix.com:
+ *
+ * 2010 - 2012 Goodix Technology.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/dmi.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_data/x86/soc.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <asm/unaligned.h>
+#include "goodix.h"
+
+#define GOODIX_GPIO_INT_NAME "irq"
+#define GOODIX_GPIO_RST_NAME "reset"
+
+#define GOODIX_MAX_HEIGHT 4096
+#define GOODIX_MAX_WIDTH 4096
+#define GOODIX_INT_TRIGGER 1
+#define GOODIX_CONTACT_SIZE 8
+#define GOODIX_MAX_CONTACT_SIZE 9
+#define GOODIX_MAX_CONTACTS 10
+
+#define GOODIX_CONFIG_MIN_LENGTH 186
+#define GOODIX_CONFIG_911_LENGTH 186
+#define GOODIX_CONFIG_967_LENGTH 228
+#define GOODIX_CONFIG_GT9X_LENGTH 240
+
+#define GOODIX_BUFFER_STATUS_READY BIT(7)
+#define GOODIX_HAVE_KEY BIT(4)
+#define GOODIX_BUFFER_STATUS_TIMEOUT 20
+
+#define RESOLUTION_LOC 1
+#define MAX_CONTACTS_LOC 5
+#define TRIGGER_LOC 6
+
+/* Our special handling for GPIO accesses through ACPI is x86 specific */
+#if defined CONFIG_X86 && defined CONFIG_ACPI
+#define ACPI_GPIO_SUPPORT
+#endif
+
+struct goodix_chip_id {
+ const char *id;
+ const struct goodix_chip_data *data;
+};
+
+static int goodix_check_cfg_8(struct goodix_ts_data *ts,
+ const u8 *cfg, int len);
+static int goodix_check_cfg_16(struct goodix_ts_data *ts,
+ const u8 *cfg, int len);
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts);
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts);
+
+static const struct goodix_chip_data gt1x_chip_data = {
+ .config_addr = GOODIX_GT1X_REG_CONFIG_DATA,
+ .config_len = GOODIX_CONFIG_GT9X_LENGTH,
+ .check_config = goodix_check_cfg_16,
+ .calc_config_checksum = goodix_calc_cfg_checksum_16,
+};
+
+static const struct goodix_chip_data gt911_chip_data = {
+ .config_addr = GOODIX_GT9X_REG_CONFIG_DATA,
+ .config_len = GOODIX_CONFIG_911_LENGTH,
+ .check_config = goodix_check_cfg_8,
+ .calc_config_checksum = goodix_calc_cfg_checksum_8,
+};
+
+static const struct goodix_chip_data gt967_chip_data = {
+ .config_addr = GOODIX_GT9X_REG_CONFIG_DATA,
+ .config_len = GOODIX_CONFIG_967_LENGTH,
+ .check_config = goodix_check_cfg_8,
+ .calc_config_checksum = goodix_calc_cfg_checksum_8,
+};
+
+static const struct goodix_chip_data gt9x_chip_data = {
+ .config_addr = GOODIX_GT9X_REG_CONFIG_DATA,
+ .config_len = GOODIX_CONFIG_GT9X_LENGTH,
+ .check_config = goodix_check_cfg_8,
+ .calc_config_checksum = goodix_calc_cfg_checksum_8,
+};
+
+static const struct goodix_chip_id goodix_chip_ids[] = {
+ { .id = "1151", .data = &gt1x_chip_data },
+ { .id = "1158", .data = &gt1x_chip_data },
+ { .id = "5663", .data = &gt1x_chip_data },
+ { .id = "5688", .data = &gt1x_chip_data },
+ { .id = "917S", .data = &gt1x_chip_data },
+ { .id = "9286", .data = &gt1x_chip_data },
+
+ { .id = "911", .data = &gt911_chip_data },
+ { .id = "9271", .data = &gt911_chip_data },
+ { .id = "9110", .data = &gt911_chip_data },
+ { .id = "9111", .data = &gt911_chip_data },
+ { .id = "927", .data = &gt911_chip_data },
+ { .id = "928", .data = &gt911_chip_data },
+
+ { .id = "912", .data = &gt967_chip_data },
+ { .id = "9147", .data = &gt967_chip_data },
+ { .id = "967", .data = &gt967_chip_data },
+ { }
+};
+
+static const unsigned long goodix_irq_flags[] = {
+ IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_LEVEL_LOW,
+ IRQ_TYPE_LEVEL_HIGH,
+};
+
+static const struct dmi_system_id nine_bytes_report[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ /* Lenovo Yoga Book X90F / X90L */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"),
+ }
+ },
+ {
+ /* Lenovo Yoga Book X91F / X91L */
+ .matches = {
+ /* Non exact match to match F + L versions */
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"),
+ }
+ },
+#endif
+ {}
+};
+
+/*
+ * Those tablets have their x coordinate inverted
+ */
+static const struct dmi_system_id inverted_x_screen[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ .ident = "Cube I15-TC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Cube"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "I15-TC")
+ },
+ },
+#endif
+ {}
+};
+
+/**
+ * goodix_i2c_read - read data from a register of the i2c slave device.
+ *
+ * @client: i2c device.
+ * @reg: the register to read from.
+ * @buf: raw write data buffer.
+ * @len: length of the buffer to write
+ */
+int goodix_i2c_read(struct i2c_client *client, u16 reg, u8 *buf, int len)
+{
+ struct i2c_msg msgs[2];
+ __be16 wbuf = cpu_to_be16(reg);
+ int ret;
+
+ msgs[0].flags = 0;
+ msgs[0].addr = client->addr;
+ msgs[0].len = 2;
+ msgs[0].buf = (u8 *)&wbuf;
+
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].addr = client->addr;
+ msgs[1].len = len;
+ msgs[1].buf = buf;
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret >= 0)
+ ret = (ret == ARRAY_SIZE(msgs) ? 0 : -EIO);
+
+ if (ret)
+ dev_err(&client->dev, "Error reading %d bytes from 0x%04x: %d\n",
+ len, reg, ret);
+ return ret;
+}
+
+/**
+ * goodix_i2c_write - write data to a register of the i2c slave device.
+ *
+ * @client: i2c device.
+ * @reg: the register to write to.
+ * @buf: raw data buffer to write.
+ * @len: length of the buffer to write
+ */
+int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, int len)
+{
+ u8 *addr_buf;
+ struct i2c_msg msg;
+ int ret;
+
+ addr_buf = kmalloc(len + 2, GFP_KERNEL);
+ if (!addr_buf)
+ return -ENOMEM;
+
+ addr_buf[0] = reg >> 8;
+ addr_buf[1] = reg & 0xFF;
+ memcpy(&addr_buf[2], buf, len);
+
+ msg.flags = 0;
+ msg.addr = client->addr;
+ msg.buf = addr_buf;
+ msg.len = len + 2;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret >= 0)
+ ret = (ret == 1 ? 0 : -EIO);
+
+ kfree(addr_buf);
+
+ if (ret)
+ dev_err(&client->dev, "Error writing %d bytes to 0x%04x: %d\n",
+ len, reg, ret);
+ return ret;
+}
+
+int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value)
+{
+ return goodix_i2c_write(client, reg, &value, sizeof(value));
+}
+
+static const struct goodix_chip_data *goodix_get_chip_data(const char *id)
+{
+ unsigned int i;
+
+ for (i = 0; goodix_chip_ids[i].id; i++) {
+ if (!strcmp(goodix_chip_ids[i].id, id))
+ return goodix_chip_ids[i].data;
+ }
+
+ return &gt9x_chip_data;
+}
+
+static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
+{
+ unsigned long max_timeout;
+ int touch_num;
+ int error;
+ u16 addr = GOODIX_READ_COOR_ADDR;
+ /*
+ * We are going to read 1-byte header,
+ * ts->contact_size * max(1, touch_num) bytes of coordinates
+ * and 1-byte footer which contains the touch-key code.
+ */
+ const int header_contact_keycode_size = 1 + ts->contact_size + 1;
+
+ /*
+ * The 'buffer status' bit, which indicates that the data is valid, is
+ * not set as soon as the interrupt is raised, but slightly after.
+ * This takes around 10 ms to happen, so we poll for 20 ms.
+ */
+ max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
+ do {
+ error = goodix_i2c_read(ts->client, addr, data,
+ header_contact_keycode_size);
+ if (error)
+ return error;
+
+ if (data[0] & GOODIX_BUFFER_STATUS_READY) {
+ touch_num = data[0] & 0x0f;
+ if (touch_num > ts->max_touch_num)
+ return -EPROTO;
+
+ if (touch_num > 1) {
+ addr += header_contact_keycode_size;
+ data += header_contact_keycode_size;
+ error = goodix_i2c_read(ts->client,
+ addr, data,
+ ts->contact_size *
+ (touch_num - 1));
+ if (error)
+ return error;
+ }
+
+ return touch_num;
+ }
+
+ if (data[0] == 0 && ts->firmware_name) {
+ if (goodix_handle_fw_request(ts))
+ return 0;
+ }
+
+ usleep_range(1000, 2000); /* Poll every 1 - 2 ms */
+ } while (time_before(jiffies, max_timeout));
+
+ /*
+ * The Goodix panel will send spurious interrupts after a
+ * 'finger up' event, which will always cause a timeout.
+ */
+ return -ENOMSG;
+}
+
+static int goodix_create_pen_input(struct goodix_ts_data *ts)
+{
+ struct device *dev = &ts->client->dev;
+ struct input_dev *input;
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ input_copy_abs(input, ABS_X, ts->input_dev, ABS_MT_POSITION_X);
+ input_copy_abs(input, ABS_Y, ts->input_dev, ABS_MT_POSITION_Y);
+ /*
+ * The resolution of these touchscreens is about 10 units/mm, the actual
+ * resolution does not matter much since we set INPUT_PROP_DIRECT.
+ * Userspace wants something here though, so just set it to 10 units/mm.
+ */
+ input_abs_set_res(input, ABS_X, 10);
+ input_abs_set_res(input, ABS_Y, 10);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0);
+
+ input_set_capability(input, EV_KEY, BTN_TOUCH);
+ input_set_capability(input, EV_KEY, BTN_TOOL_PEN);
+ input_set_capability(input, EV_KEY, BTN_STYLUS);
+ input_set_capability(input, EV_KEY, BTN_STYLUS2);
+ __set_bit(INPUT_PROP_DIRECT, input->propbit);
+
+ input->name = "Goodix Active Pen";
+ input->phys = "input/pen";
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x0416;
+ if (kstrtou16(ts->id, 10, &input->id.product))
+ input->id.product = 0x1001;
+ input->id.version = ts->version;
+
+ ts->input_pen = input;
+ return 0;
+}
+
+static void goodix_ts_report_pen_down(struct goodix_ts_data *ts, u8 *data)
+{
+ int input_x, input_y, input_w, error;
+ u8 key_value;
+
+ if (!ts->pen_input_registered) {
+ error = input_register_device(ts->input_pen);
+ ts->pen_input_registered = (error == 0) ? 1 : error;
+ }
+
+ if (ts->pen_input_registered < 0)
+ return;
+
+ if (ts->contact_size == 9) {
+ input_x = get_unaligned_le16(&data[4]);
+ input_y = get_unaligned_le16(&data[6]);
+ input_w = get_unaligned_le16(&data[8]);
+ } else {
+ input_x = get_unaligned_le16(&data[2]);
+ input_y = get_unaligned_le16(&data[4]);
+ input_w = get_unaligned_le16(&data[6]);
+ }
+
+ touchscreen_report_pos(ts->input_pen, &ts->prop, input_x, input_y, false);
+ input_report_abs(ts->input_pen, ABS_PRESSURE, input_w);
+
+ input_report_key(ts->input_pen, BTN_TOUCH, 1);
+ input_report_key(ts->input_pen, BTN_TOOL_PEN, 1);
+
+ if (data[0] & GOODIX_HAVE_KEY) {
+ key_value = data[1 + ts->contact_size];
+ input_report_key(ts->input_pen, BTN_STYLUS, key_value & 0x10);
+ input_report_key(ts->input_pen, BTN_STYLUS2, key_value & 0x20);
+ } else {
+ input_report_key(ts->input_pen, BTN_STYLUS, 0);
+ input_report_key(ts->input_pen, BTN_STYLUS2, 0);
+ }
+
+ input_sync(ts->input_pen);
+}
+
+static void goodix_ts_report_pen_up(struct goodix_ts_data *ts)
+{
+ if (!ts->input_pen)
+ return;
+
+ input_report_key(ts->input_pen, BTN_TOUCH, 0);
+ input_report_key(ts->input_pen, BTN_TOOL_PEN, 0);
+ input_report_key(ts->input_pen, BTN_STYLUS, 0);
+ input_report_key(ts->input_pen, BTN_STYLUS2, 0);
+
+ input_sync(ts->input_pen);
+}
+
+static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data)
+{
+ int id = coor_data[0] & 0x0F;
+ int input_x = get_unaligned_le16(&coor_data[1]);
+ int input_y = get_unaligned_le16(&coor_data[3]);
+ int input_w = get_unaligned_le16(&coor_data[5]);
+
+ input_mt_slot(ts->input_dev, id);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
+ touchscreen_report_pos(ts->input_dev, &ts->prop,
+ input_x, input_y, true);
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
+ input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
+}
+
+static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data)
+{
+ int id = coor_data[1] & 0x0F;
+ int input_x = get_unaligned_le16(&coor_data[3]);
+ int input_y = get_unaligned_le16(&coor_data[5]);
+ int input_w = get_unaligned_le16(&coor_data[7]);
+
+ input_mt_slot(ts->input_dev, id);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
+ touchscreen_report_pos(ts->input_dev, &ts->prop,
+ input_x, input_y, true);
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
+ input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
+}
+
+static void goodix_ts_release_keys(struct goodix_ts_data *ts)
+{
+ int i;
+
+ for (i = 0; i < GOODIX_MAX_KEYS; i++)
+ input_report_key(ts->input_dev, ts->keymap[i], 0);
+}
+
+static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data)
+{
+ int touch_num;
+ u8 key_value;
+ int i;
+
+ if (data[0] & GOODIX_HAVE_KEY) {
+ touch_num = data[0] & 0x0f;
+ key_value = data[1 + ts->contact_size * touch_num];
+ for (i = 0; i < GOODIX_MAX_KEYS; i++)
+ if (key_value & BIT(i))
+ input_report_key(ts->input_dev,
+ ts->keymap[i], 1);
+ } else {
+ goodix_ts_release_keys(ts);
+ }
+}
+
+/**
+ * goodix_process_events - Process incoming events
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Called when the IRQ is triggered. Read the current device state, and push
+ * the input events to the user space.
+ */
+static void goodix_process_events(struct goodix_ts_data *ts)
+{
+ u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+ int touch_num;
+ int i;
+
+ touch_num = goodix_ts_read_input_report(ts, point_data);
+ if (touch_num < 0)
+ return;
+
+ /* The pen being down is always reported as a single touch */
+ if (touch_num == 1 && (point_data[1] & 0x80)) {
+ goodix_ts_report_pen_down(ts, point_data);
+ goodix_ts_release_keys(ts);
+ goto sync; /* Release any previously registered touches */
+ } else {
+ goodix_ts_report_pen_up(ts);
+ }
+
+ goodix_ts_report_key(ts, point_data);
+
+ for (i = 0; i < touch_num; i++)
+ if (ts->contact_size == 9)
+ goodix_ts_report_touch_9b(ts,
+ &point_data[1 + ts->contact_size * i]);
+ else
+ goodix_ts_report_touch_8b(ts,
+ &point_data[1 + ts->contact_size * i]);
+
+sync:
+ input_mt_sync_frame(ts->input_dev);
+ input_sync(ts->input_dev);
+}
+
+/**
+ * goodix_ts_irq_handler - The IRQ handler
+ *
+ * @irq: interrupt number.
+ * @dev_id: private data pointer.
+ */
+static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
+{
+ struct goodix_ts_data *ts = dev_id;
+
+ goodix_process_events(ts);
+ goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0);
+
+ return IRQ_HANDLED;
+}
+
+static void goodix_free_irq(struct goodix_ts_data *ts)
+{
+ devm_free_irq(&ts->client->dev, ts->client->irq, ts);
+}
+
+static int goodix_request_irq(struct goodix_ts_data *ts)
+{
+ return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
+ NULL, goodix_ts_irq_handler,
+ ts->irq_flags, ts->client->name, ts);
+}
+
+static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len)
+{
+ int i, raw_cfg_len = len - 2;
+ u8 check_sum = 0;
+
+ for (i = 0; i < raw_cfg_len; i++)
+ check_sum += cfg[i];
+ check_sum = (~check_sum) + 1;
+ if (check_sum != cfg[raw_cfg_len]) {
+ dev_err(&ts->client->dev,
+ "The checksum of the config fw is not correct");
+ return -EINVAL;
+ }
+
+ if (cfg[raw_cfg_len + 1] != 1) {
+ dev_err(&ts->client->dev,
+ "Config fw must have Config_Fresh register set");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void goodix_calc_cfg_checksum_8(struct goodix_ts_data *ts)
+{
+ int i, raw_cfg_len = ts->chip->config_len - 2;
+ u8 check_sum = 0;
+
+ for (i = 0; i < raw_cfg_len; i++)
+ check_sum += ts->config[i];
+ check_sum = (~check_sum) + 1;
+
+ ts->config[raw_cfg_len] = check_sum;
+ ts->config[raw_cfg_len + 1] = 1; /* Set "config_fresh" bit */
+}
+
+static int goodix_check_cfg_16(struct goodix_ts_data *ts, const u8 *cfg,
+ int len)
+{
+ int i, raw_cfg_len = len - 3;
+ u16 check_sum = 0;
+
+ for (i = 0; i < raw_cfg_len; i += 2)
+ check_sum += get_unaligned_be16(&cfg[i]);
+ check_sum = (~check_sum) + 1;
+ if (check_sum != get_unaligned_be16(&cfg[raw_cfg_len])) {
+ dev_err(&ts->client->dev,
+ "The checksum of the config fw is not correct");
+ return -EINVAL;
+ }
+
+ if (cfg[raw_cfg_len + 2] != 1) {
+ dev_err(&ts->client->dev,
+ "Config fw must have Config_Fresh register set");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void goodix_calc_cfg_checksum_16(struct goodix_ts_data *ts)
+{
+ int i, raw_cfg_len = ts->chip->config_len - 3;
+ u16 check_sum = 0;
+
+ for (i = 0; i < raw_cfg_len; i += 2)
+ check_sum += get_unaligned_be16(&ts->config[i]);
+ check_sum = (~check_sum) + 1;
+
+ put_unaligned_be16(check_sum, &ts->config[raw_cfg_len]);
+ ts->config[raw_cfg_len + 2] = 1; /* Set "config_fresh" bit */
+}
+
+/**
+ * goodix_check_cfg - Checks if config fw is valid
+ *
+ * @ts: goodix_ts_data pointer
+ * @cfg: firmware config data
+ * @len: config data length
+ */
+static int goodix_check_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len)
+{
+ if (len < GOODIX_CONFIG_MIN_LENGTH ||
+ len > GOODIX_CONFIG_MAX_LENGTH) {
+ dev_err(&ts->client->dev,
+ "The length of the config fw is not correct");
+ return -EINVAL;
+ }
+
+ return ts->chip->check_config(ts, cfg, len);
+}
+
+/**
+ * goodix_send_cfg - Write fw config to device
+ *
+ * @ts: goodix_ts_data pointer
+ * @cfg: config firmware to write to device
+ * @len: config data length
+ */
+int goodix_send_cfg(struct goodix_ts_data *ts, const u8 *cfg, int len)
+{
+ int error;
+
+ error = goodix_check_cfg(ts, cfg, len);
+ if (error)
+ return error;
+
+ error = goodix_i2c_write(ts->client, ts->chip->config_addr, cfg, len);
+ if (error)
+ return error;
+
+ dev_dbg(&ts->client->dev, "Config sent successfully.");
+
+ /* Let the firmware reconfigure itself, so sleep for 10ms */
+ usleep_range(10000, 11000);
+
+ return 0;
+}
+
+#ifdef ACPI_GPIO_SUPPORT
+static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts)
+{
+ acpi_handle handle = ACPI_HANDLE(&ts->client->dev);
+ acpi_status status;
+
+ status = acpi_evaluate_object(handle, "INTI", NULL, NULL);
+ return ACPI_SUCCESS(status) ? 0 : -EIO;
+}
+
+static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value)
+{
+ acpi_handle handle = ACPI_HANDLE(&ts->client->dev);
+ acpi_status status;
+
+ status = acpi_execute_simple_method(handle, "INTO", value);
+ return ACPI_SUCCESS(status) ? 0 : -EIO;
+}
+#else
+static int goodix_pin_acpi_direction_input(struct goodix_ts_data *ts)
+{
+ dev_err(&ts->client->dev,
+ "%s called on device without ACPI support\n", __func__);
+ return -EINVAL;
+}
+
+static int goodix_pin_acpi_output_method(struct goodix_ts_data *ts, int value)
+{
+ dev_err(&ts->client->dev,
+ "%s called on device without ACPI support\n", __func__);
+ return -EINVAL;
+}
+#endif
+
+static int goodix_irq_direction_output(struct goodix_ts_data *ts, int value)
+{
+ switch (ts->irq_pin_access_method) {
+ case IRQ_PIN_ACCESS_NONE:
+ dev_err(&ts->client->dev,
+ "%s called without an irq_pin_access_method set\n",
+ __func__);
+ return -EINVAL;
+ case IRQ_PIN_ACCESS_GPIO:
+ return gpiod_direction_output(ts->gpiod_int, value);
+ case IRQ_PIN_ACCESS_ACPI_GPIO:
+ /*
+ * The IRQ pin triggers on a falling edge, so its gets marked
+ * as active-low, use output_raw to avoid the value inversion.
+ */
+ return gpiod_direction_output_raw(ts->gpiod_int, value);
+ case IRQ_PIN_ACCESS_ACPI_METHOD:
+ return goodix_pin_acpi_output_method(ts, value);
+ }
+
+ return -EINVAL; /* Never reached */
+}
+
+static int goodix_irq_direction_input(struct goodix_ts_data *ts)
+{
+ switch (ts->irq_pin_access_method) {
+ case IRQ_PIN_ACCESS_NONE:
+ dev_err(&ts->client->dev,
+ "%s called without an irq_pin_access_method set\n",
+ __func__);
+ return -EINVAL;
+ case IRQ_PIN_ACCESS_GPIO:
+ return gpiod_direction_input(ts->gpiod_int);
+ case IRQ_PIN_ACCESS_ACPI_GPIO:
+ return gpiod_direction_input(ts->gpiod_int);
+ case IRQ_PIN_ACCESS_ACPI_METHOD:
+ return goodix_pin_acpi_direction_input(ts);
+ }
+
+ return -EINVAL; /* Never reached */
+}
+
+int goodix_int_sync(struct goodix_ts_data *ts)
+{
+ int error;
+
+ error = goodix_irq_direction_output(ts, 0);
+ if (error)
+ goto error;
+
+ msleep(50); /* T5: 50ms */
+
+ error = goodix_irq_direction_input(ts);
+ if (error)
+ goto error;
+
+ return 0;
+
+error:
+ dev_err(&ts->client->dev, "Controller irq sync failed.\n");
+ return error;
+}
+
+/**
+ * goodix_reset_no_int_sync - Reset device, leaving interrupt line in output mode
+ *
+ * @ts: goodix_ts_data pointer
+ */
+int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
+{
+ int error;
+
+ /* begin select I2C slave addr */
+ error = gpiod_direction_output(ts->gpiod_rst, 0);
+ if (error)
+ goto error;
+
+ msleep(20); /* T2: > 10ms */
+
+ /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
+ error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
+ if (error)
+ goto error;
+
+ usleep_range(100, 2000); /* T3: > 100us */
+
+ error = gpiod_direction_output(ts->gpiod_rst, 1);
+ if (error)
+ goto error;
+
+ usleep_range(6000, 10000); /* T4: > 5ms */
+
+ /*
+ * Put the reset pin back in to input / high-impedance mode to save
+ * power. Only do this in the non ACPI case since some ACPI boards
+ * don't have a pull-up, so there the reset pin must stay active-high.
+ */
+ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) {
+ error = gpiod_direction_input(ts->gpiod_rst);
+ if (error)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ dev_err(&ts->client->dev, "Controller reset failed.\n");
+ return error;
+}
+
+/**
+ * goodix_reset - Reset device during power on
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_reset(struct goodix_ts_data *ts)
+{
+ int error;
+
+ error = goodix_reset_no_int_sync(ts);
+ if (error)
+ return error;
+
+ return goodix_int_sync(ts);
+}
+
+#ifdef ACPI_GPIO_SUPPORT
+static const struct acpi_gpio_params first_gpio = { 0, 0, false };
+static const struct acpi_gpio_params second_gpio = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_goodix_int_first_gpios[] = {
+ { GOODIX_GPIO_INT_NAME "-gpios", &first_gpio, 1 },
+ { GOODIX_GPIO_RST_NAME "-gpios", &second_gpio, 1 },
+ { },
+};
+
+static const struct acpi_gpio_mapping acpi_goodix_int_last_gpios[] = {
+ { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 },
+ { GOODIX_GPIO_INT_NAME "-gpios", &second_gpio, 1 },
+ { },
+};
+
+static const struct acpi_gpio_mapping acpi_goodix_reset_only_gpios[] = {
+ { GOODIX_GPIO_RST_NAME "-gpios", &first_gpio, 1 },
+ { },
+};
+
+static int goodix_resource(struct acpi_resource *ares, void *data)
+{
+ struct goodix_ts_data *ts = data;
+ struct device *dev = &ts->client->dev;
+ struct acpi_resource_gpio *gpio;
+
+ if (acpi_gpio_get_irq_resource(ares, &gpio)) {
+ if (ts->gpio_int_idx == -1) {
+ ts->gpio_int_idx = ts->gpio_count;
+ } else {
+ dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n");
+ ts->gpio_int_idx = -2;
+ }
+ ts->gpio_count++;
+ } else if (acpi_gpio_get_io_resource(ares, &gpio))
+ ts->gpio_count++;
+
+ return 0;
+}
+
+/*
+ * This function gets called in case we fail to get the irq GPIO directly
+ * because the ACPI tables lack GPIO-name to APCI _CRS index mappings
+ * (no _DSD UUID daffd814-6eba-4d8c-8a91-bc9bbf4aa301 data).
+ * In that case we add our own mapping and then goodix_get_gpio_config()
+ * retries to get the GPIOs based on the added mapping.
+ */
+static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
+{
+ const struct acpi_gpio_mapping *gpio_mapping = NULL;
+ struct device *dev = &ts->client->dev;
+ LIST_HEAD(resources);
+ int irq, ret;
+
+ ts->gpio_count = 0;
+ ts->gpio_int_idx = -1;
+ ret = acpi_dev_get_resources(ACPI_COMPANION(dev), &resources,
+ goodix_resource, ts);
+ if (ret < 0) {
+ dev_err(dev, "Error getting ACPI resources: %d\n", ret);
+ return ret;
+ }
+
+ acpi_dev_free_resource_list(&resources);
+
+ /*
+ * CHT devices should have a GpioInt + a regular GPIO ACPI resource.
+ * Some CHT devices have a bug (where the also is bogus Interrupt
+ * resource copied from a previous BYT based generation). i2c-core-acpi
+ * will use the non-working Interrupt resource, fix this up.
+ */
+ if (soc_intel_is_cht() && ts->gpio_count == 2 && ts->gpio_int_idx != -1) {
+ irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
+ if (irq > 0 && irq != ts->client->irq) {
+ dev_warn(dev, "Overriding IRQ %d -> %d\n", ts->client->irq, irq);
+ ts->client->irq = irq;
+ }
+ }
+
+ if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+ gpio_mapping = acpi_goodix_int_first_gpios;
+ } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+ gpio_mapping = acpi_goodix_int_last_gpios;
+ } else if (ts->gpio_count == 1 && ts->gpio_int_idx == -1 &&
+ acpi_has_method(ACPI_HANDLE(dev), "INTI") &&
+ acpi_has_method(ACPI_HANDLE(dev), "INTO")) {
+ dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n");
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD;
+ gpio_mapping = acpi_goodix_reset_only_gpios;
+ } else if (soc_intel_is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) {
+ dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n");
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
+ gpio_mapping = acpi_goodix_int_last_gpios;
+ } else if (ts->gpio_count == 1 && ts->gpio_int_idx == 0) {
+ /*
+ * On newer devices there is only 1 GpioInt resource and _PS0
+ * does the whole reset sequence for us.
+ */
+ acpi_device_fix_up_power(ACPI_COMPANION(dev));
+
+ /*
+ * Before the _PS0 call the int GPIO may have been in output
+ * mode and the call should have put the int GPIO in input mode,
+ * but the GPIO subsys cached state may still think it is
+ * in output mode, causing gpiochip_lock_as_irq() failure.
+ *
+ * Add a mapping for the int GPIO to make the
+ * gpiod_int = gpiod_get(..., GPIOD_IN) call succeed,
+ * which will explicitly set the direction to input.
+ */
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+ gpio_mapping = acpi_goodix_int_first_gpios;
+ } else {
+ dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n",
+ ts->gpio_count, ts->gpio_int_idx);
+ /*
+ * On some devices _PS0 does a reset for us and
+ * sometimes this is necessary for things to work.
+ */
+ acpi_device_fix_up_power(ACPI_COMPANION(dev));
+ return -EINVAL;
+ }
+
+ /*
+ * Normally we put the reset pin in input / high-impedance mode to save
+ * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI
+ * case, leave the pin as is. This results in the pin not being touched
+ * at all on x86/ACPI boards, except when needed for error-recover.
+ */
+ ts->gpiod_rst_flags = GPIOD_ASIS;
+
+ return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping);
+}
+#else
+static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
+{
+ return -EINVAL;
+}
+#endif /* CONFIG_X86 && CONFIG_ACPI */
+
+/**
+ * goodix_get_gpio_config - Get GPIO config from ACPI/DT
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_get_gpio_config(struct goodix_ts_data *ts)
+{
+ int error;
+ struct device *dev;
+ struct gpio_desc *gpiod;
+ bool added_acpi_mappings = false;
+
+ if (!ts->client)
+ return -EINVAL;
+ dev = &ts->client->dev;
+
+ /*
+ * By default we request the reset pin as input, leaving it in
+ * high-impedance when not resetting the controller to save power.
+ */
+ ts->gpiod_rst_flags = GPIOD_IN;
+
+ ts->avdd28 = devm_regulator_get(dev, "AVDD28");
+ if (IS_ERR(ts->avdd28)) {
+ error = PTR_ERR(ts->avdd28);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to get AVDD28 regulator: %d\n", error);
+ return error;
+ }
+
+ ts->vddio = devm_regulator_get(dev, "VDDIO");
+ if (IS_ERR(ts->vddio)) {
+ error = PTR_ERR(ts->vddio);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to get VDDIO regulator: %d\n", error);
+ return error;
+ }
+
+retry_get_irq_gpio:
+ /* Get the interrupt GPIO pin number */
+ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
+ if (IS_ERR(gpiod)) {
+ error = PTR_ERR(gpiod);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get %s GPIO: %d\n",
+ GOODIX_GPIO_INT_NAME, error);
+ return error;
+ }
+ if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) {
+ added_acpi_mappings = true;
+ if (goodix_add_acpi_gpio_mappings(ts) == 0)
+ goto retry_get_irq_gpio;
+ }
+
+ ts->gpiod_int = gpiod;
+
+ /* Get the reset line GPIO pin number */
+ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags);
+ if (IS_ERR(gpiod)) {
+ error = PTR_ERR(gpiod);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get %s GPIO: %d\n",
+ GOODIX_GPIO_RST_NAME, error);
+ return error;
+ }
+
+ ts->gpiod_rst = gpiod;
+
+ switch (ts->irq_pin_access_method) {
+ case IRQ_PIN_ACCESS_ACPI_GPIO:
+ /*
+ * We end up here if goodix_add_acpi_gpio_mappings() has
+ * called devm_acpi_dev_add_driver_gpios() because the ACPI
+ * tables did not contain name to index mappings.
+ * Check that we successfully got both GPIOs after we've
+ * added our own acpi_gpio_mapping and if we did not get both
+ * GPIOs reset irq_pin_access_method to IRQ_PIN_ACCESS_NONE.
+ */
+ if (!ts->gpiod_int || !ts->gpiod_rst)
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+ break;
+ case IRQ_PIN_ACCESS_ACPI_METHOD:
+ if (!ts->gpiod_rst)
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE;
+ break;
+ default:
+ if (ts->gpiod_int && ts->gpiod_rst) {
+ ts->reset_controller_at_probe = true;
+ ts->load_cfg_from_disk = true;
+ ts->irq_pin_access_method = IRQ_PIN_ACCESS_GPIO;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * goodix_read_config - Read the embedded configuration of the panel
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Must be called during probe
+ */
+static void goodix_read_config(struct goodix_ts_data *ts)
+{
+ int x_max, y_max;
+ int error;
+
+ /*
+ * On controllers where we need to upload the firmware
+ * (controllers without flash) ts->config already has the config
+ * at this point and the controller itself does not have it yet!
+ */
+ if (!ts->firmware_name) {
+ error = goodix_i2c_read(ts->client, ts->chip->config_addr,
+ ts->config, ts->chip->config_len);
+ if (error) {
+ ts->int_trigger_type = GOODIX_INT_TRIGGER;
+ ts->max_touch_num = GOODIX_MAX_CONTACTS;
+ return;
+ }
+ }
+
+ ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03;
+ ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
+
+ x_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC]);
+ y_max = get_unaligned_le16(&ts->config[RESOLUTION_LOC + 2]);
+ if (x_max && y_max) {
+ input_abs_set_max(ts->input_dev, ABS_MT_POSITION_X, x_max - 1);
+ input_abs_set_max(ts->input_dev, ABS_MT_POSITION_Y, y_max - 1);
+ }
+
+ ts->chip->calc_config_checksum(ts);
+}
+
+/**
+ * goodix_read_version - Read goodix touchscreen version
+ *
+ * @ts: our goodix_ts_data pointer
+ */
+static int goodix_read_version(struct goodix_ts_data *ts)
+{
+ int error;
+ u8 buf[6];
+ char id_str[GOODIX_ID_MAX_LEN + 1];
+
+ error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf));
+ if (error)
+ return error;
+
+ memcpy(id_str, buf, GOODIX_ID_MAX_LEN);
+ id_str[GOODIX_ID_MAX_LEN] = 0;
+ strscpy(ts->id, id_str, GOODIX_ID_MAX_LEN + 1);
+
+ ts->version = get_unaligned_le16(&buf[4]);
+
+ dev_info(&ts->client->dev, "ID %s, version: %04x\n", ts->id,
+ ts->version);
+
+ return 0;
+}
+
+/**
+ * goodix_i2c_test - I2C test function to check if the device answers.
+ *
+ * @client: the i2c client
+ */
+static int goodix_i2c_test(struct i2c_client *client)
+{
+ int retry = 0;
+ int error;
+ u8 test;
+
+ while (retry++ < 2) {
+ error = goodix_i2c_read(client, GOODIX_REG_ID, &test, 1);
+ if (!error)
+ return 0;
+
+ msleep(20);
+ }
+
+ return error;
+}
+
+/**
+ * goodix_configure_dev - Finish device initialization
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Must be called from probe to finish initialization of the device.
+ * Contains the common initialization code for both devices that
+ * declare gpio pins and devices that do not. It is either called
+ * directly from probe or from request_firmware_wait callback.
+ */
+static int goodix_configure_dev(struct goodix_ts_data *ts)
+{
+ int error;
+ int i;
+
+ ts->int_trigger_type = GOODIX_INT_TRIGGER;
+ ts->max_touch_num = GOODIX_MAX_CONTACTS;
+
+ ts->input_dev = devm_input_allocate_device(&ts->client->dev);
+ if (!ts->input_dev) {
+ dev_err(&ts->client->dev, "Failed to allocate input device.");
+ return -ENOMEM;
+ }
+
+ ts->input_dev->name = "Goodix Capacitive TouchScreen";
+ ts->input_dev->phys = "input/ts";
+ ts->input_dev->id.bustype = BUS_I2C;
+ ts->input_dev->id.vendor = 0x0416;
+ if (kstrtou16(ts->id, 10, &ts->input_dev->id.product))
+ ts->input_dev->id.product = 0x1001;
+ ts->input_dev->id.version = ts->version;
+
+ ts->input_dev->keycode = ts->keymap;
+ ts->input_dev->keycodesize = sizeof(ts->keymap[0]);
+ ts->input_dev->keycodemax = GOODIX_MAX_KEYS;
+
+ /* Capacitive Windows/Home button on some devices */
+ for (i = 0; i < GOODIX_MAX_KEYS; ++i) {
+ if (i == 0)
+ ts->keymap[i] = KEY_LEFTMETA;
+ else
+ ts->keymap[i] = KEY_F1 + (i - 1);
+
+ input_set_capability(ts->input_dev, EV_KEY, ts->keymap[i]);
+ }
+
+ input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+retry_read_config:
+ /* Read configuration and apply touchscreen parameters */
+ goodix_read_config(ts);
+
+ /* Try overriding touchscreen parameters via device properties */
+ touchscreen_parse_properties(ts->input_dev, true, &ts->prop);
+
+ if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) {
+ if (!ts->reset_controller_at_probe &&
+ ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) {
+ dev_info(&ts->client->dev, "Config not set, resetting controller\n");
+ /* Retry after a controller reset */
+ ts->reset_controller_at_probe = true;
+ error = goodix_reset(ts);
+ if (error)
+ return error;
+ goto retry_read_config;
+ }
+ dev_err(&ts->client->dev,
+ "Invalid config (%d, %d, %d), using defaults\n",
+ ts->prop.max_x, ts->prop.max_y, ts->max_touch_num);
+ ts->prop.max_x = GOODIX_MAX_WIDTH - 1;
+ ts->prop.max_y = GOODIX_MAX_HEIGHT - 1;
+ ts->max_touch_num = GOODIX_MAX_CONTACTS;
+ input_abs_set_max(ts->input_dev,
+ ABS_MT_POSITION_X, ts->prop.max_x);
+ input_abs_set_max(ts->input_dev,
+ ABS_MT_POSITION_Y, ts->prop.max_y);
+ }
+
+ if (dmi_check_system(nine_bytes_report)) {
+ ts->contact_size = 9;
+
+ dev_dbg(&ts->client->dev,
+ "Non-standard 9-bytes report format quirk\n");
+ }
+
+ if (dmi_check_system(inverted_x_screen)) {
+ ts->prop.invert_x = true;
+ dev_dbg(&ts->client->dev,
+ "Applying 'inverted x screen' quirk\n");
+ }
+
+ error = input_mt_init_slots(ts->input_dev, ts->max_touch_num,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to initialize MT slots: %d", error);
+ return error;
+ }
+
+ error = input_register_device(ts->input_dev);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to register input device: %d", error);
+ return error;
+ }
+
+ /*
+ * Create the input_pen device before goodix_request_irq() calls
+ * devm_request_threaded_irq() so that the devm framework frees
+ * it after disabling the irq.
+ * Unfortunately there is no way to detect if the touchscreen has pen
+ * support, so registering the dev is delayed till the first pen event.
+ */
+ error = goodix_create_pen_input(ts);
+ if (error)
+ return error;
+
+ ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
+ error = goodix_request_irq(ts);
+ if (error) {
+ dev_err(&ts->client->dev, "request IRQ failed: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+/**
+ * goodix_config_cb - Callback to finish device init
+ *
+ * @cfg: firmware config
+ * @ctx: our goodix_ts_data pointer
+ *
+ * request_firmware_wait callback that finishes
+ * initialization of the device.
+ */
+static void goodix_config_cb(const struct firmware *cfg, void *ctx)
+{
+ struct goodix_ts_data *ts = ctx;
+ int error;
+
+ if (ts->firmware_name) {
+ if (!cfg)
+ goto err_release_cfg;
+
+ error = goodix_check_cfg(ts, cfg->data, cfg->size);
+ if (error)
+ goto err_release_cfg;
+
+ memcpy(ts->config, cfg->data, cfg->size);
+ } else if (cfg) {
+ /* send device configuration to the firmware */
+ error = goodix_send_cfg(ts, cfg->data, cfg->size);
+ if (error)
+ goto err_release_cfg;
+ }
+
+ goodix_configure_dev(ts);
+
+err_release_cfg:
+ release_firmware(cfg);
+ complete_all(&ts->firmware_loading_complete);
+}
+
+static void goodix_disable_regulators(void *arg)
+{
+ struct goodix_ts_data *ts = arg;
+
+ regulator_disable(ts->vddio);
+ regulator_disable(ts->avdd28);
+}
+
+static int goodix_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct goodix_ts_data *ts;
+ const char *cfg_name;
+ int error;
+
+ dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "I2C check functionality failed.\n");
+ return -ENXIO;
+ }
+
+ ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+ init_completion(&ts->firmware_loading_complete);
+ ts->contact_size = GOODIX_CONTACT_SIZE;
+
+ error = goodix_get_gpio_config(ts);
+ if (error)
+ return error;
+
+ /* power up the controller */
+ error = regulator_enable(ts->avdd28);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to enable AVDD28 regulator: %d\n",
+ error);
+ return error;
+ }
+
+ error = regulator_enable(ts->vddio);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to enable VDDIO regulator: %d\n",
+ error);
+ regulator_disable(ts->avdd28);
+ return error;
+ }
+
+ error = devm_add_action_or_reset(&client->dev,
+ goodix_disable_regulators, ts);
+ if (error)
+ return error;
+
+reset:
+ if (ts->reset_controller_at_probe) {
+ /* reset the controller */
+ error = goodix_reset(ts);
+ if (error)
+ return error;
+ }
+
+ error = goodix_i2c_test(client);
+ if (error) {
+ if (!ts->reset_controller_at_probe &&
+ ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) {
+ /* Retry after a controller reset */
+ ts->reset_controller_at_probe = true;
+ goto reset;
+ }
+ dev_err(&client->dev, "I2C communication failure: %d\n", error);
+ return error;
+ }
+
+ error = goodix_firmware_check(ts);
+ if (error)
+ return error;
+
+ error = goodix_read_version(ts);
+ if (error)
+ return error;
+
+ ts->chip = goodix_get_chip_data(ts->id);
+
+ if (ts->load_cfg_from_disk) {
+ /* update device config */
+ error = device_property_read_string(&client->dev,
+ "goodix,config-name",
+ &cfg_name);
+ if (!error)
+ snprintf(ts->cfg_name, sizeof(ts->cfg_name),
+ "goodix/%s", cfg_name);
+ else
+ snprintf(ts->cfg_name, sizeof(ts->cfg_name),
+ "goodix_%s_cfg.bin", ts->id);
+
+ error = request_firmware_nowait(THIS_MODULE, true, ts->cfg_name,
+ &client->dev, GFP_KERNEL, ts,
+ goodix_config_cb);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to invoke firmware loader: %d\n",
+ error);
+ return error;
+ }
+
+ return 0;
+ } else {
+ error = goodix_configure_dev(ts);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static void goodix_ts_remove(struct i2c_client *client)
+{
+ struct goodix_ts_data *ts = i2c_get_clientdata(client);
+
+ if (ts->load_cfg_from_disk)
+ wait_for_completion(&ts->firmware_loading_complete);
+}
+
+static int __maybe_unused goodix_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct goodix_ts_data *ts = i2c_get_clientdata(client);
+ int error;
+
+ if (ts->load_cfg_from_disk)
+ wait_for_completion(&ts->firmware_loading_complete);
+
+ /* We need gpio pins to suspend/resume */
+ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
+ disable_irq(client->irq);
+ return 0;
+ }
+
+ /* Free IRQ as IRQ pin is used as output in the suspend sequence */
+ goodix_free_irq(ts);
+
+ /* Save reference (calibration) info if necessary */
+ goodix_save_bak_ref(ts);
+
+ /* Output LOW on the INT pin for 5 ms */
+ error = goodix_irq_direction_output(ts, 0);
+ if (error) {
+ goodix_request_irq(ts);
+ return error;
+ }
+
+ usleep_range(5000, 6000);
+
+ error = goodix_i2c_write_u8(ts->client, GOODIX_REG_COMMAND,
+ GOODIX_CMD_SCREEN_OFF);
+ if (error) {
+ goodix_irq_direction_input(ts);
+ goodix_request_irq(ts);
+ return -EAGAIN;
+ }
+
+ /*
+ * The datasheet specifies that the interval between sending screen-off
+ * command and wake-up should be longer than 58 ms. To avoid waking up
+ * sooner, delay 58ms here.
+ */
+ msleep(58);
+ return 0;
+}
+
+static int __maybe_unused goodix_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct goodix_ts_data *ts = i2c_get_clientdata(client);
+ u8 config_ver;
+ int error;
+
+ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
+ enable_irq(client->irq);
+ return 0;
+ }
+
+ /*
+ * Exit sleep mode by outputting HIGH level to INT pin
+ * for 2ms~5ms.
+ */
+ error = goodix_irq_direction_output(ts, 1);
+ if (error)
+ return error;
+
+ usleep_range(2000, 5000);
+
+ error = goodix_int_sync(ts);
+ if (error)
+ return error;
+
+ error = goodix_i2c_read(ts->client, ts->chip->config_addr,
+ &config_ver, 1);
+ if (!error && config_ver != ts->config[0])
+ dev_info(dev, "Config version mismatch %d != %d, resetting controller\n",
+ config_ver, ts->config[0]);
+
+ if (error != 0 || config_ver != ts->config[0]) {
+ error = goodix_reset(ts);
+ if (error)
+ return error;
+
+ error = goodix_send_cfg(ts, ts->config, ts->chip->config_len);
+ if (error)
+ return error;
+ }
+
+ error = goodix_request_irq(ts);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume);
+
+static const struct i2c_device_id goodix_ts_id[] = {
+ { "GDIX1001:00", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, goodix_ts_id);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id goodix_acpi_match[] = {
+ { "GDIX1001", 0 },
+ { "GDIX1002", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id goodix_of_match[] = {
+ { .compatible = "goodix,gt1151" },
+ { .compatible = "goodix,gt1158" },
+ { .compatible = "goodix,gt5663" },
+ { .compatible = "goodix,gt5688" },
+ { .compatible = "goodix,gt911" },
+ { .compatible = "goodix,gt9110" },
+ { .compatible = "goodix,gt912" },
+ { .compatible = "goodix,gt9147" },
+ { .compatible = "goodix,gt917s" },
+ { .compatible = "goodix,gt927" },
+ { .compatible = "goodix,gt9271" },
+ { .compatible = "goodix,gt928" },
+ { .compatible = "goodix,gt9286" },
+ { .compatible = "goodix,gt967" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, goodix_of_match);
+#endif
+
+static struct i2c_driver goodix_ts_driver = {
+ .probe = goodix_ts_probe,
+ .remove = goodix_ts_remove,
+ .id_table = goodix_ts_id,
+ .driver = {
+ .name = "Goodix-TS",
+ .acpi_match_table = ACPI_PTR(goodix_acpi_match),
+ .of_match_table = of_match_ptr(goodix_of_match),
+ .pm = &goodix_pm_ops,
+ },
+};
+module_i2c_driver(goodix_ts_driver);
+
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
+MODULE_DESCRIPTION("Goodix touchscreen driver");
+MODULE_LICENSE("GPL v2");