diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/input/touchscreen/wacom_w8001.c | 709 |
1 files changed, 709 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c new file mode 100644 index 000000000..928c5ee3a --- /dev/null +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -0,0 +1,709 @@ +/* + * Wacom W8001 penabled serial touchscreen driver + * + * Copyright (c) 2008 Jaya Kumar + * Copyright (c) 2010 Red Hat, Inc. + * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout based on Elo serial touchscreen driver by Vojtech Pavlik + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input/mt.h> +#include <linux/serio.h> +#include <linux/ctype.h> +#include <linux/delay.h> + +#define DRIVER_DESC "Wacom W8001 serial touchscreen driver" + +MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +#define W8001_MAX_PHYS 42 + +#define W8001_MAX_LENGTH 13 +#define W8001_LEAD_MASK 0x80 +#define W8001_LEAD_BYTE 0x80 +#define W8001_TAB_MASK 0x40 +#define W8001_TAB_BYTE 0x40 +/* set in first byte of touch data packets */ +#define W8001_TOUCH_MASK (0x10 | W8001_LEAD_MASK) +#define W8001_TOUCH_BYTE (0x10 | W8001_LEAD_BYTE) + +#define W8001_QUERY_PACKET 0x20 + +#define W8001_CMD_STOP '0' +#define W8001_CMD_START '1' +#define W8001_CMD_QUERY '*' +#define W8001_CMD_TOUCHQUERY '%' + +/* length of data packets in bytes, depends on device. */ +#define W8001_PKTLEN_TOUCH93 5 +#define W8001_PKTLEN_TOUCH9A 7 +#define W8001_PKTLEN_TPCPEN 9 +#define W8001_PKTLEN_TPCCTL 11 /* control packet */ +#define W8001_PKTLEN_TOUCH2FG 13 + +/* resolution in points/mm */ +#define W8001_PEN_RESOLUTION 100 +#define W8001_TOUCH_RESOLUTION 10 + +struct w8001_coord { + u8 rdy; + u8 tsw; + u8 f1; + u8 f2; + u16 x; + u16 y; + u16 pen_pressure; + u8 tilt_x; + u8 tilt_y; +}; + +/* touch query reply packet */ +struct w8001_touch_query { + u16 x; + u16 y; + u8 panel_res; + u8 capacity_res; + u8 sensor_id; +}; + +/* + * Per-touchscreen data. + */ + +struct w8001 { + struct input_dev *pen_dev; + struct input_dev *touch_dev; + struct serio *serio; + struct completion cmd_done; + int id; + int idx; + unsigned char response_type; + unsigned char response[W8001_MAX_LENGTH]; + unsigned char data[W8001_MAX_LENGTH]; + char phys[W8001_MAX_PHYS]; + int type; + unsigned int pktlen; + u16 max_touch_x; + u16 max_touch_y; + u16 max_pen_x; + u16 max_pen_y; + char pen_name[64]; + char touch_name[64]; + int open_count; + struct mutex mutex; +}; + +static void parse_pen_data(u8 *data, struct w8001_coord *coord) +{ + memset(coord, 0, sizeof(*coord)); + + coord->rdy = data[0] & 0x20; + coord->tsw = data[0] & 0x01; + coord->f1 = data[0] & 0x02; + coord->f2 = data[0] & 0x04; + + coord->x = (data[1] & 0x7F) << 9; + coord->x |= (data[2] & 0x7F) << 2; + coord->x |= (data[6] & 0x60) >> 5; + + coord->y = (data[3] & 0x7F) << 9; + coord->y |= (data[4] & 0x7F) << 2; + coord->y |= (data[6] & 0x18) >> 3; + + coord->pen_pressure = data[5] & 0x7F; + coord->pen_pressure |= (data[6] & 0x07) << 7 ; + + coord->tilt_x = data[7] & 0x7F; + coord->tilt_y = data[8] & 0x7F; +} + +static void parse_single_touch(u8 *data, struct w8001_coord *coord) +{ + coord->x = (data[1] << 7) | data[2]; + coord->y = (data[3] << 7) | data[4]; + coord->tsw = data[0] & 0x01; +} + +static void scale_touch_coordinates(struct w8001 *w8001, + unsigned int *x, unsigned int *y) +{ + if (w8001->max_pen_x && w8001->max_touch_x) + *x = *x * w8001->max_pen_x / w8001->max_touch_x; + + if (w8001->max_pen_y && w8001->max_touch_y) + *y = *y * w8001->max_pen_y / w8001->max_touch_y; +} + +static void parse_multi_touch(struct w8001 *w8001) +{ + struct input_dev *dev = w8001->touch_dev; + unsigned char *data = w8001->data; + unsigned int x, y; + int i; + int count = 0; + + for (i = 0; i < 2; i++) { + bool touch = data[0] & (1 << i); + + input_mt_slot(dev, i); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch); + if (touch) { + x = (data[6 * i + 1] << 7) | data[6 * i + 2]; + y = (data[6 * i + 3] << 7) | data[6 * i + 4]; + /* data[5,6] and [11,12] is finger capacity */ + + /* scale to pen maximum */ + scale_touch_coordinates(w8001, &x, &y); + + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + count++; + } + } + + /* emulate single touch events when stylus is out of proximity. + * This is to make single touch backward support consistent + * across all Wacom single touch devices. + */ + if (w8001->type != BTN_TOOL_PEN && + w8001->type != BTN_TOOL_RUBBER) { + w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED; + input_mt_report_pointer_emulation(dev, true); + } + + input_sync(dev); +} + +static void parse_touchquery(u8 *data, struct w8001_touch_query *query) +{ + memset(query, 0, sizeof(*query)); + + query->panel_res = data[1]; + query->sensor_id = data[2] & 0x7; + query->capacity_res = data[7]; + + query->x = data[3] << 9; + query->x |= data[4] << 2; + query->x |= (data[2] >> 5) & 0x3; + + query->y = data[5] << 9; + query->y |= data[6] << 2; + query->y |= (data[2] >> 3) & 0x3; + + /* Early days' single-finger touch models need the following defaults */ + if (!query->x && !query->y) { + query->x = 1024; + query->y = 1024; + if (query->panel_res) + query->x = query->y = (1 << query->panel_res); + query->panel_res = W8001_TOUCH_RESOLUTION; + } +} + +static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord) +{ + struct input_dev *dev = w8001->pen_dev; + + /* + * We have 1 bit for proximity (rdy) and 3 bits for tip, side, + * side2/eraser. If rdy && f2 are set, this can be either pen + side2, + * or eraser. Assume: + * - if dev is already in proximity and f2 is toggled → pen + side2 + * - if dev comes into proximity with f2 set → eraser + * If f2 disappears after assuming eraser, fake proximity out for + * eraser and in for pen. + */ + + switch (w8001->type) { + case BTN_TOOL_RUBBER: + if (!coord->f2) { + input_report_abs(dev, ABS_PRESSURE, 0); + input_report_key(dev, BTN_TOUCH, 0); + input_report_key(dev, BTN_STYLUS, 0); + input_report_key(dev, BTN_STYLUS2, 0); + input_report_key(dev, BTN_TOOL_RUBBER, 0); + input_sync(dev); + w8001->type = BTN_TOOL_PEN; + } + break; + + case BTN_TOOL_FINGER: + case KEY_RESERVED: + w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + break; + + default: + input_report_key(dev, BTN_STYLUS2, coord->f2); + break; + } + + input_report_abs(dev, ABS_X, coord->x); + input_report_abs(dev, ABS_Y, coord->y); + input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure); + input_report_key(dev, BTN_TOUCH, coord->tsw); + input_report_key(dev, BTN_STYLUS, coord->f1); + input_report_key(dev, w8001->type, coord->rdy); + input_sync(dev); + + if (!coord->rdy) + w8001->type = KEY_RESERVED; +} + +static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord) +{ + struct input_dev *dev = w8001->touch_dev; + unsigned int x = coord->x; + unsigned int y = coord->y; + + /* scale to pen maximum */ + scale_touch_coordinates(w8001, &x, &y); + + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_report_key(dev, BTN_TOUCH, coord->tsw); + + input_sync(dev); + + w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED; +} + +static irqreturn_t w8001_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct w8001 *w8001 = serio_get_drvdata(serio); + struct w8001_coord coord; + unsigned char tmp; + + w8001->data[w8001->idx] = data; + switch (w8001->idx++) { + case 0: + if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) { + pr_debug("w8001: unsynchronized data: 0x%02x\n", data); + w8001->idx = 0; + } + break; + + case W8001_PKTLEN_TOUCH93 - 1: + case W8001_PKTLEN_TOUCH9A - 1: + tmp = w8001->data[0] & W8001_TOUCH_BYTE; + if (tmp != W8001_TOUCH_BYTE) + break; + + if (w8001->pktlen == w8001->idx) { + w8001->idx = 0; + if (w8001->type != BTN_TOOL_PEN && + w8001->type != BTN_TOOL_RUBBER) { + parse_single_touch(w8001->data, &coord); + report_single_touch(w8001, &coord); + } + } + break; + + /* Pen coordinates packet */ + case W8001_PKTLEN_TPCPEN - 1: + tmp = w8001->data[0] & W8001_TAB_MASK; + if (unlikely(tmp == W8001_TAB_BYTE)) + break; + + tmp = w8001->data[0] & W8001_TOUCH_BYTE; + if (tmp == W8001_TOUCH_BYTE) + break; + + w8001->idx = 0; + parse_pen_data(w8001->data, &coord); + report_pen_events(w8001, &coord); + break; + + /* control packet */ + case W8001_PKTLEN_TPCCTL - 1: + tmp = w8001->data[0] & W8001_TOUCH_MASK; + if (tmp == W8001_TOUCH_BYTE) + break; + + w8001->idx = 0; + memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH); + w8001->response_type = W8001_QUERY_PACKET; + complete(&w8001->cmd_done); + break; + + /* 2 finger touch packet */ + case W8001_PKTLEN_TOUCH2FG - 1: + w8001->idx = 0; + parse_multi_touch(w8001); + break; + + default: + /* + * ThinkPad X60 Tablet PC (pen only device) sometimes + * sends invalid data packets that are larger than + * W8001_PKTLEN_TPCPEN. Let's start over again. + */ + if (!w8001->touch_dev && w8001->idx > W8001_PKTLEN_TPCPEN - 1) + w8001->idx = 0; + } + + return IRQ_HANDLED; +} + +static int w8001_command(struct w8001 *w8001, unsigned char command, + bool wait_response) +{ + int rc; + + w8001->response_type = 0; + init_completion(&w8001->cmd_done); + + rc = serio_write(w8001->serio, command); + if (rc == 0 && wait_response) { + + wait_for_completion_timeout(&w8001->cmd_done, HZ); + if (w8001->response_type != W8001_QUERY_PACKET) + rc = -EIO; + } + + return rc; +} + +static int w8001_open(struct input_dev *dev) +{ + struct w8001 *w8001 = input_get_drvdata(dev); + int err; + + err = mutex_lock_interruptible(&w8001->mutex); + if (err) + return err; + + if (w8001->open_count++ == 0) { + err = w8001_command(w8001, W8001_CMD_START, false); + if (err) + w8001->open_count--; + } + + mutex_unlock(&w8001->mutex); + return err; +} + +static void w8001_close(struct input_dev *dev) +{ + struct w8001 *w8001 = input_get_drvdata(dev); + + mutex_lock(&w8001->mutex); + + if (--w8001->open_count == 0) + w8001_command(w8001, W8001_CMD_STOP, false); + + mutex_unlock(&w8001->mutex); +} + +static int w8001_detect(struct w8001 *w8001) +{ + int error; + + error = w8001_command(w8001, W8001_CMD_STOP, false); + if (error) + return error; + + msleep(250); /* wait 250ms before querying the device */ + + return 0; +} + +static int w8001_setup_pen(struct w8001 *w8001, char *basename, + size_t basename_sz) +{ + struct input_dev *dev = w8001->pen_dev; + struct w8001_coord coord; + int error; + + /* penabled? */ + error = w8001_command(w8001, W8001_CMD_QUERY, true); + if (error) + return error; + + __set_bit(EV_KEY, dev->evbit); + __set_bit(EV_ABS, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_PEN, dev->keybit); + __set_bit(BTN_TOOL_RUBBER, dev->keybit); + __set_bit(BTN_STYLUS, dev->keybit); + __set_bit(BTN_STYLUS2, dev->keybit); + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + + parse_pen_data(w8001->response, &coord); + w8001->max_pen_x = coord.x; + w8001->max_pen_y = coord.y; + + input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); + input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION); + input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION); + input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0); + if (coord.tilt_x && coord.tilt_y) { + input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); + input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0); + } + + w8001->id = 0x90; + strlcat(basename, " Penabled", basename_sz); + + return 0; +} + +static int w8001_setup_touch(struct w8001 *w8001, char *basename, + size_t basename_sz) +{ + struct input_dev *dev = w8001->touch_dev; + struct w8001_touch_query touch; + int error; + + + /* Touch enabled? */ + error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true); + if (error) + return error; + /* + * Some non-touch devices may reply to the touch query. But their + * second byte is empty, which indicates touch is not supported. + */ + if (!w8001->response[1]) + return -ENXIO; + + __set_bit(EV_KEY, dev->evbit); + __set_bit(EV_ABS, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + + parse_touchquery(w8001->response, &touch); + w8001->max_touch_x = touch.x; + w8001->max_touch_y = touch.y; + + if (w8001->max_pen_x && w8001->max_pen_y) { + /* if pen is supported scale to pen maximum */ + touch.x = w8001->max_pen_x; + touch.y = w8001->max_pen_y; + touch.panel_res = W8001_PEN_RESOLUTION; + } + + input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0); + input_abs_set_res(dev, ABS_X, touch.panel_res); + input_abs_set_res(dev, ABS_Y, touch.panel_res); + + switch (touch.sensor_id) { + case 0: + case 2: + w8001->pktlen = W8001_PKTLEN_TOUCH93; + w8001->id = 0x93; + strlcat(basename, " 1FG", basename_sz); + break; + + case 1: + case 3: + case 4: + w8001->pktlen = W8001_PKTLEN_TOUCH9A; + strlcat(basename, " 1FG", basename_sz); + w8001->id = 0x9a; + break; + + case 5: + w8001->pktlen = W8001_PKTLEN_TOUCH2FG; + + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + error = input_mt_init_slots(dev, 2, 0); + if (error) { + dev_err(&w8001->serio->dev, + "failed to initialize MT slots: %d\n", error); + return error; + } + + input_set_abs_params(dev, ABS_MT_POSITION_X, + 0, touch.x, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, + 0, touch.y, 0, 0); + input_set_abs_params(dev, ABS_MT_TOOL_TYPE, + 0, MT_TOOL_MAX, 0, 0); + input_abs_set_res(dev, ABS_MT_POSITION_X, touch.panel_res); + input_abs_set_res(dev, ABS_MT_POSITION_Y, touch.panel_res); + + strlcat(basename, " 2FG", basename_sz); + if (w8001->max_pen_x && w8001->max_pen_y) + w8001->id = 0xE3; + else + w8001->id = 0xE2; + break; + } + + strlcat(basename, " Touchscreen", basename_sz); + + return 0; +} + +static void w8001_set_devdata(struct input_dev *dev, struct w8001 *w8001, + struct serio *serio) +{ + dev->phys = w8001->phys; + dev->id.bustype = BUS_RS232; + dev->id.product = w8001->id; + dev->id.vendor = 0x056a; + dev->id.version = 0x0100; + dev->open = w8001_open; + dev->close = w8001_close; + + dev->dev.parent = &serio->dev; + + input_set_drvdata(dev, w8001); +} + +/* + * w8001_disconnect() is the opposite of w8001_connect() + */ + +static void w8001_disconnect(struct serio *serio) +{ + struct w8001 *w8001 = serio_get_drvdata(serio); + + serio_close(serio); + + if (w8001->pen_dev) + input_unregister_device(w8001->pen_dev); + if (w8001->touch_dev) + input_unregister_device(w8001->touch_dev); + kfree(w8001); + + serio_set_drvdata(serio, NULL); +} + +/* + * w8001_connect() is the routine that is called when someone adds a + * new serio device that supports the w8001 protocol and registers it as + * an input device. + */ + +static int w8001_connect(struct serio *serio, struct serio_driver *drv) +{ + struct w8001 *w8001; + struct input_dev *input_dev_pen; + struct input_dev *input_dev_touch; + char basename[64]; + int err, err_pen, err_touch; + + w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL); + input_dev_pen = input_allocate_device(); + input_dev_touch = input_allocate_device(); + if (!w8001 || !input_dev_pen || !input_dev_touch) { + err = -ENOMEM; + goto fail1; + } + + w8001->serio = serio; + w8001->pen_dev = input_dev_pen; + w8001->touch_dev = input_dev_touch; + mutex_init(&w8001->mutex); + init_completion(&w8001->cmd_done); + snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys); + + serio_set_drvdata(serio, w8001); + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = w8001_detect(w8001); + if (err) + goto fail3; + + /* For backwards-compatibility we compose the basename based on + * capabilities and then just append the tool type + */ + strscpy(basename, "Wacom Serial", sizeof(basename)); + + err_pen = w8001_setup_pen(w8001, basename, sizeof(basename)); + err_touch = w8001_setup_touch(w8001, basename, sizeof(basename)); + if (err_pen && err_touch) { + err = -ENXIO; + goto fail3; + } + + if (!err_pen) { + strscpy(w8001->pen_name, basename, sizeof(w8001->pen_name)); + strlcat(w8001->pen_name, " Pen", sizeof(w8001->pen_name)); + input_dev_pen->name = w8001->pen_name; + + w8001_set_devdata(input_dev_pen, w8001, serio); + + err = input_register_device(w8001->pen_dev); + if (err) + goto fail3; + } else { + input_free_device(input_dev_pen); + input_dev_pen = NULL; + w8001->pen_dev = NULL; + } + + if (!err_touch) { + strscpy(w8001->touch_name, basename, sizeof(w8001->touch_name)); + strlcat(w8001->touch_name, " Finger", + sizeof(w8001->touch_name)); + input_dev_touch->name = w8001->touch_name; + + w8001_set_devdata(input_dev_touch, w8001, serio); + + err = input_register_device(w8001->touch_dev); + if (err) + goto fail4; + } else { + input_free_device(input_dev_touch); + input_dev_touch = NULL; + w8001->touch_dev = NULL; + } + + return 0; + +fail4: + if (w8001->pen_dev) + input_unregister_device(w8001->pen_dev); +fail3: + serio_close(serio); +fail2: + serio_set_drvdata(serio, NULL); +fail1: + input_free_device(input_dev_pen); + input_free_device(input_dev_touch); + kfree(w8001); + return err; +} + +static const struct serio_device_id w8001_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_W8001, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, w8001_serio_ids); + +static struct serio_driver w8001_drv = { + .driver = { + .name = "w8001", + }, + .description = DRIVER_DESC, + .id_table = w8001_serio_ids, + .interrupt = w8001_interrupt, + .connect = w8001_connect, + .disconnect = w8001_disconnect, +}; + +module_serio_driver(w8001_drv); |