summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb-frontends/cx24120.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb-frontends/cx24120.c')
-rw-r--r--drivers/media/dvb-frontends/cx24120.c1591
1 files changed, 1591 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/cx24120.c b/drivers/media/dvb-frontends/cx24120.c
new file mode 100644
index 000000000..44515fdbe
--- /dev/null
+++ b/drivers/media/dvb-frontends/cx24120.c
@@ -0,0 +1,1591 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner driver
+
+ Copyright (C) 2008 Patrick Boettcher <pb@linuxtv.org>
+ Copyright (C) 2009 Sergey Tyurin <forum.free-x.de>
+ Updated 2012 by Jannis Achstetter <jannis_achstetter@web.de>
+ Copyright (C) 2015 Jemma Denson <jdenson@gmail.com>
+ April 2015
+ Refactored & simplified driver
+ Updated to work with delivery system supplied by DVBv5
+ Add frequency, fec & pilot to get_frontend
+
+ Cards supported: Technisat Skystar S2
+
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <media/dvb_frontend.h>
+#include "cx24120.h"
+
+#define CX24120_SEARCH_RANGE_KHZ 5000
+#define CX24120_FIRMWARE "dvb-fe-cx24120-1.20.58.2.fw"
+
+/* cx24120 i2c registers */
+#define CX24120_REG_CMD_START 0x00 /* write cmd_id */
+#define CX24120_REG_CMD_ARGS 0x01 /* write command arguments */
+#define CX24120_REG_CMD_END 0x1f /* write 0x01 for end */
+
+#define CX24120_REG_MAILBOX 0x33
+#define CX24120_REG_FREQ3 0x34 /* frequency */
+#define CX24120_REG_FREQ2 0x35
+#define CX24120_REG_FREQ1 0x36
+
+#define CX24120_REG_FECMODE 0x39 /* FEC status */
+#define CX24120_REG_STATUS 0x3a /* Tuner status */
+#define CX24120_REG_SIGSTR_H 0x3a /* Signal strength high */
+#define CX24120_REG_SIGSTR_L 0x3b /* Signal strength low byte */
+#define CX24120_REG_QUALITY_H 0x40 /* SNR high byte */
+#define CX24120_REG_QUALITY_L 0x41 /* SNR low byte */
+
+#define CX24120_REG_BER_HH 0x47 /* BER high byte of high word */
+#define CX24120_REG_BER_HL 0x48 /* BER low byte of high word */
+#define CX24120_REG_BER_LH 0x49 /* BER high byte of low word */
+#define CX24120_REG_BER_LL 0x4a /* BER low byte of low word */
+
+#define CX24120_REG_UCB_H 0x50 /* UCB high byte */
+#define CX24120_REG_UCB_L 0x51 /* UCB low byte */
+
+#define CX24120_REG_CLKDIV 0xe6
+#define CX24120_REG_RATEDIV 0xf0
+
+#define CX24120_REG_REVISION 0xff /* Chip revision (ro) */
+
+/* Command messages */
+enum command_message_id {
+ CMD_VCO_SET = 0x10, /* cmd.len = 12; */
+ CMD_TUNEREQUEST = 0x11, /* cmd.len = 15; */
+
+ CMD_MPEG_ONOFF = 0x13, /* cmd.len = 4; */
+ CMD_MPEG_INIT = 0x14, /* cmd.len = 7; */
+ CMD_BANDWIDTH = 0x15, /* cmd.len = 12; */
+ CMD_CLOCK_READ = 0x16, /* read clock */
+ CMD_CLOCK_SET = 0x17, /* cmd.len = 10; */
+
+ CMD_DISEQC_MSG1 = 0x20, /* cmd.len = 11; */
+ CMD_DISEQC_MSG2 = 0x21, /* cmd.len = d->msg_len + 6; */
+ CMD_SETVOLTAGE = 0x22, /* cmd.len = 2; */
+ CMD_SETTONE = 0x23, /* cmd.len = 4; */
+ CMD_DISEQC_BURST = 0x24, /* cmd.len not used !!! */
+
+ CMD_READ_SNR = 0x1a, /* Read signal strength */
+ CMD_START_TUNER = 0x1b, /* ??? */
+
+ CMD_FWVERSION = 0x35,
+
+ CMD_BER_CTRL = 0x3c, /* cmd.len = 0x03; */
+};
+
+#define CX24120_MAX_CMD_LEN 30
+
+/* pilot mask */
+#define CX24120_PILOT_OFF 0x00
+#define CX24120_PILOT_ON 0x40
+#define CX24120_PILOT_AUTO 0x80
+
+/* signal status */
+#define CX24120_HAS_SIGNAL 0x01
+#define CX24120_HAS_CARRIER 0x02
+#define CX24120_HAS_VITERBI 0x04
+#define CX24120_HAS_LOCK 0x08
+#define CX24120_HAS_UNK1 0x10
+#define CX24120_HAS_UNK2 0x20
+#define CX24120_STATUS_MASK 0x0f
+#define CX24120_SIGNAL_MASK 0xc0
+
+/* ber window */
+#define CX24120_BER_WINDOW 16
+#define CX24120_BER_WSIZE ((1 << CX24120_BER_WINDOW) * 208 * 8)
+
+#define info(args...) pr_info("cx24120: " args)
+#define err(args...) pr_err("cx24120: ### ERROR: " args)
+
+/* The Demod/Tuner can't easily provide these, we cache them */
+struct cx24120_tuning {
+ u32 frequency;
+ u32 symbol_rate;
+ enum fe_spectral_inversion inversion;
+ enum fe_code_rate fec;
+
+ enum fe_delivery_system delsys;
+ enum fe_modulation modulation;
+ enum fe_pilot pilot;
+
+ /* Demod values */
+ u8 fec_val;
+ u8 fec_mask;
+ u8 clkdiv;
+ u8 ratediv;
+ u8 inversion_val;
+ u8 pilot_val;
+};
+
+/* Private state */
+struct cx24120_state {
+ struct i2c_adapter *i2c;
+ const struct cx24120_config *config;
+ struct dvb_frontend frontend;
+
+ u8 cold_init;
+ u8 mpeg_enabled;
+ u8 need_clock_set;
+
+ /* current and next tuning parameters */
+ struct cx24120_tuning dcur;
+ struct cx24120_tuning dnxt;
+
+ enum fe_status fe_status;
+
+ /* dvbv5 stats calculations */
+ u32 bitrate;
+ u32 berw_usecs;
+ u32 ber_prev;
+ u32 ucb_offset;
+ unsigned long ber_jiffies_stats;
+ unsigned long per_jiffies_stats;
+};
+
+/* Command message to firmware */
+struct cx24120_cmd {
+ u8 id;
+ u8 len;
+ u8 arg[CX24120_MAX_CMD_LEN];
+};
+
+/* Read single register */
+static int cx24120_readreg(struct cx24120_state *state, u8 reg)
+{
+ int ret;
+ u8 buf = 0;
+ struct i2c_msg msg[] = {
+ {
+ .addr = state->config->i2c_addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &reg
+ }, {
+ .addr = state->config->i2c_addr,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = &buf
+ }
+ };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+ if (ret != 2) {
+ err("Read error: reg=0x%02x, ret=%i)\n", reg, ret);
+ return ret;
+ }
+
+ dev_dbg(&state->i2c->dev, "reg=0x%02x; data=0x%02x\n", reg, buf);
+
+ return buf;
+}
+
+/* Write single register */
+static int cx24120_writereg(struct cx24120_state *state, u8 reg, u8 data)
+{
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = {
+ .addr = state->config->i2c_addr,
+ .flags = 0,
+ .buf = buf,
+ .len = 2
+ };
+ int ret;
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1) {
+ err("Write error: i2c_write error(err == %i, 0x%02x: 0x%02x)\n",
+ ret, reg, data);
+ return ret;
+ }
+
+ dev_dbg(&state->i2c->dev, "reg=0x%02x; data=0x%02x\n", reg, data);
+
+ return 0;
+}
+
+/* Write multiple registers in chunks of i2c_wr_max-sized buffers */
+static int cx24120_writeregs(struct cx24120_state *state,
+ u8 reg, const u8 *values, u16 len, u8 incr)
+{
+ int ret;
+ u16 max = state->config->i2c_wr_max > 0 ?
+ state->config->i2c_wr_max :
+ len;
+
+ struct i2c_msg msg = {
+ .addr = state->config->i2c_addr,
+ .flags = 0,
+ };
+
+ msg.buf = kmalloc(max + 1, GFP_KERNEL);
+ if (!msg.buf)
+ return -ENOMEM;
+
+ while (len) {
+ msg.buf[0] = reg;
+ msg.len = len > max ? max : len;
+ memcpy(&msg.buf[1], values, msg.len);
+
+ len -= msg.len; /* data length revers counter */
+ values += msg.len; /* incr data pointer */
+
+ if (incr)
+ reg += msg.len;
+ msg.len++; /* don't forget the addr byte */
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1) {
+ err("i2c_write error(err == %i, 0x%02x)\n", ret, reg);
+ goto out;
+ }
+
+ dev_dbg(&state->i2c->dev, "reg=0x%02x; data=%*ph\n",
+ reg, msg.len - 1, msg.buf + 1);
+ }
+
+ ret = 0;
+
+out:
+ kfree(msg.buf);
+ return ret;
+}
+
+static const struct dvb_frontend_ops cx24120_ops;
+
+struct dvb_frontend *cx24120_attach(const struct cx24120_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct cx24120_state *state;
+ int demod_rev;
+
+ info("Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner\n");
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state) {
+ err("Unable to allocate memory for cx24120_state\n");
+ goto error;
+ }
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+
+ /* check if the demod is present and has proper type */
+ demod_rev = cx24120_readreg(state, CX24120_REG_REVISION);
+ switch (demod_rev) {
+ case 0x07:
+ info("Demod cx24120 rev. 0x07 detected.\n");
+ break;
+ case 0x05:
+ info("Demod cx24120 rev. 0x05 detected.\n");
+ break;
+ default:
+ err("Unsupported demod revision: 0x%x detected.\n", demod_rev);
+ goto error;
+ }
+
+ /* create dvb_frontend */
+ state->cold_init = 0;
+ memcpy(&state->frontend.ops, &cx24120_ops,
+ sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+
+ info("Conexant cx24120/cx24118 attached.\n");
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(cx24120_attach);
+
+static int cx24120_test_rom(struct cx24120_state *state)
+{
+ int err, ret;
+
+ err = cx24120_readreg(state, 0xfd);
+ if (err & 4) {
+ ret = cx24120_readreg(state, 0xdf) & 0xfe;
+ err = cx24120_writereg(state, 0xdf, ret);
+ }
+ return err;
+}
+
+static int cx24120_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ if (c->cnr.stat[0].scale != FE_SCALE_DECIBEL)
+ *snr = 0;
+ else
+ *snr = div_s64(c->cnr.stat[0].svalue, 100);
+
+ return 0;
+}
+
+static int cx24120_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ if (c->post_bit_error.stat[0].scale != FE_SCALE_COUNTER) {
+ *ber = 0;
+ return 0;
+ }
+
+ *ber = c->post_bit_error.stat[0].uvalue - state->ber_prev;
+ state->ber_prev = c->post_bit_error.stat[0].uvalue;
+
+ return 0;
+}
+
+static int cx24120_msg_mpeg_output_global_config(struct cx24120_state *state,
+ u8 flag);
+
+/* Check if we're running a command that needs to disable mpeg out */
+static void cx24120_check_cmd(struct cx24120_state *state, u8 id)
+{
+ switch (id) {
+ case CMD_TUNEREQUEST:
+ case CMD_CLOCK_READ:
+ case CMD_DISEQC_MSG1:
+ case CMD_DISEQC_MSG2:
+ case CMD_SETVOLTAGE:
+ case CMD_SETTONE:
+ case CMD_DISEQC_BURST:
+ cx24120_msg_mpeg_output_global_config(state, 0);
+ /* Old driver would do a msleep(100) here */
+ return;
+ default:
+ return;
+ }
+}
+
+/* Send a message to the firmware */
+static int cx24120_message_send(struct cx24120_state *state,
+ struct cx24120_cmd *cmd)
+{
+ int ficus;
+
+ if (state->mpeg_enabled) {
+ /* Disable mpeg out on certain commands */
+ cx24120_check_cmd(state, cmd->id);
+ }
+
+ cx24120_writereg(state, CX24120_REG_CMD_START, cmd->id);
+ cx24120_writeregs(state, CX24120_REG_CMD_ARGS, &cmd->arg[0],
+ cmd->len, 1);
+ cx24120_writereg(state, CX24120_REG_CMD_END, 0x01);
+
+ ficus = 1000;
+ while (cx24120_readreg(state, CX24120_REG_CMD_END)) {
+ msleep(20);
+ ficus -= 20;
+ if (ficus == 0) {
+ err("Error sending message to firmware\n");
+ return -EREMOTEIO;
+ }
+ }
+ dev_dbg(&state->i2c->dev, "sent message 0x%02x\n", cmd->id);
+
+ return 0;
+}
+
+/* Send a message and fill arg[] with the results */
+static int cx24120_message_sendrcv(struct cx24120_state *state,
+ struct cx24120_cmd *cmd, u8 numreg)
+{
+ int ret, i;
+
+ if (numreg > CX24120_MAX_CMD_LEN) {
+ err("Too many registers to read. cmd->reg = %d", numreg);
+ return -EREMOTEIO;
+ }
+
+ ret = cx24120_message_send(state, cmd);
+ if (ret != 0)
+ return ret;
+
+ if (!numreg)
+ return 0;
+
+ /* Read numreg registers starting from register cmd->len */
+ for (i = 0; i < numreg; i++)
+ cmd->arg[i] = cx24120_readreg(state, (cmd->len + i + 1));
+
+ return 0;
+}
+
+static int cx24120_read_signal_strength(struct dvb_frontend *fe,
+ u16 *signal_strength)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ if (c->strength.stat[0].scale != FE_SCALE_RELATIVE)
+ *signal_strength = 0;
+ else
+ *signal_strength = c->strength.stat[0].uvalue;
+
+ return 0;
+}
+
+static int cx24120_msg_mpeg_output_global_config(struct cx24120_state *state,
+ u8 enable)
+{
+ struct cx24120_cmd cmd;
+ int ret;
+
+ cmd.id = CMD_MPEG_ONOFF;
+ cmd.len = 4;
+ cmd.arg[0] = 0x01;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = enable ? 0 : (u8)(-1);
+ cmd.arg[3] = 0x01;
+
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0) {
+ dev_dbg(&state->i2c->dev, "failed to %s MPEG output\n",
+ enable ? "enable" : "disable");
+ return ret;
+ }
+
+ state->mpeg_enabled = enable;
+ dev_dbg(&state->i2c->dev, "MPEG output %s\n",
+ enable ? "enabled" : "disabled");
+
+ return 0;
+}
+
+static int cx24120_msg_mpeg_output_config(struct cx24120_state *state, u8 seq)
+{
+ struct cx24120_cmd cmd;
+ struct cx24120_initial_mpeg_config i =
+ state->config->initial_mpeg_config;
+
+ cmd.id = CMD_MPEG_INIT;
+ cmd.len = 7;
+ cmd.arg[0] = seq; /* sequental number - can be 0,1,2 */
+ cmd.arg[1] = ((i.x1 & 0x01) << 1) | ((i.x1 >> 1) & 0x01);
+ cmd.arg[2] = 0x05;
+ cmd.arg[3] = 0x02;
+ cmd.arg[4] = ((i.x2 >> 1) & 0x01);
+ cmd.arg[5] = (i.x2 & 0xf0) | (i.x3 & 0x0f);
+ cmd.arg[6] = 0x10;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+static int cx24120_diseqc_send_burst(struct dvb_frontend *fe,
+ enum fe_sec_mini_cmd burst)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+
+ dev_dbg(&state->i2c->dev, "\n");
+
+ /*
+ * Yes, cmd.len is set to zero. The old driver
+ * didn't specify any len, but also had a
+ * memset 0 before every use of the cmd struct
+ * which would have set it to zero.
+ * This quite probably needs looking into.
+ */
+ cmd.id = CMD_DISEQC_BURST;
+ cmd.len = 0;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = (burst == SEC_MINI_B) ? 0x01 : 0x00;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+static int cx24120_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+
+ dev_dbg(&state->i2c->dev, "(%d)\n", tone);
+
+ if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
+ err("Invalid tone=%d\n", tone);
+ return -EINVAL;
+ }
+
+ cmd.id = CMD_SETTONE;
+ cmd.len = 4;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x00;
+ cmd.arg[3] = (tone == SEC_TONE_ON) ? 0x01 : 0x00;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+static int cx24120_set_voltage(struct dvb_frontend *fe,
+ enum fe_sec_voltage voltage)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+
+ dev_dbg(&state->i2c->dev, "(%d)\n", voltage);
+
+ cmd.id = CMD_SETVOLTAGE;
+ cmd.len = 2;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = (voltage == SEC_VOLTAGE_18) ? 0x01 : 0x00;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+static int cx24120_send_diseqc_msg(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *d)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ int back_count;
+
+ dev_dbg(&state->i2c->dev, "\n");
+
+ cmd.id = CMD_DISEQC_MSG1;
+ cmd.len = 11;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x03;
+ cmd.arg[3] = 0x16;
+ cmd.arg[4] = 0x28;
+ cmd.arg[5] = 0x01;
+ cmd.arg[6] = 0x01;
+ cmd.arg[7] = 0x14;
+ cmd.arg[8] = 0x19;
+ cmd.arg[9] = 0x14;
+ cmd.arg[10] = 0x1e;
+
+ if (cx24120_message_send(state, &cmd)) {
+ err("send 1st message(0x%x) failed\n", cmd.id);
+ return -EREMOTEIO;
+ }
+
+ cmd.id = CMD_DISEQC_MSG2;
+ cmd.len = d->msg_len + 6;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x01;
+ cmd.arg[2] = 0x02;
+ cmd.arg[3] = 0x00;
+ cmd.arg[4] = 0x00;
+ cmd.arg[5] = d->msg_len;
+
+ memcpy(&cmd.arg[6], &d->msg, d->msg_len);
+
+ if (cx24120_message_send(state, &cmd)) {
+ err("send 2nd message(0x%x) failed\n", cmd.id);
+ return -EREMOTEIO;
+ }
+
+ back_count = 500;
+ do {
+ if (!(cx24120_readreg(state, 0x93) & 0x01)) {
+ dev_dbg(&state->i2c->dev, "diseqc sequence sent\n");
+ return 0;
+ }
+ msleep(20);
+ back_count -= 20;
+ } while (back_count);
+
+ err("Too long waiting for diseqc.\n");
+ return -ETIMEDOUT;
+}
+
+static void cx24120_get_stats(struct cx24120_state *state)
+{
+ struct dvb_frontend *fe = &state->frontend;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_cmd cmd;
+ int ret, cnr, msecs;
+ u16 sig, ucb;
+ u32 ber;
+
+ dev_dbg(&state->i2c->dev, "\n");
+
+ /* signal strength */
+ if (state->fe_status & FE_HAS_SIGNAL) {
+ cmd.id = CMD_READ_SNR;
+ cmd.len = 1;
+ cmd.arg[0] = 0x00;
+
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0) {
+ err("error reading signal strength\n");
+ return;
+ }
+
+ /* raw */
+ sig = cx24120_readreg(state, CX24120_REG_SIGSTR_H) >> 6;
+ sig = sig << 8;
+ sig |= cx24120_readreg(state, CX24120_REG_SIGSTR_L);
+ dev_dbg(&state->i2c->dev,
+ "signal strength from firmware = 0x%x\n", sig);
+
+ /* cooked */
+ sig = -100 * sig + 94324;
+
+ c->strength.stat[0].scale = FE_SCALE_RELATIVE;
+ c->strength.stat[0].uvalue = sig;
+ } else {
+ c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ }
+
+ /* CNR */
+ if (state->fe_status & FE_HAS_VITERBI) {
+ cnr = cx24120_readreg(state, CX24120_REG_QUALITY_H) << 8;
+ cnr |= cx24120_readreg(state, CX24120_REG_QUALITY_L);
+ dev_dbg(&state->i2c->dev, "read SNR index = %d\n", cnr);
+
+ /* guessed - seems about right */
+ cnr = cnr * 100;
+
+ c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
+ c->cnr.stat[0].svalue = cnr;
+ } else {
+ c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ }
+
+ /* BER & UCB require lock */
+ if (!(state->fe_status & FE_HAS_LOCK)) {
+ c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ return;
+ }
+
+ /* BER */
+ if (time_after(jiffies, state->ber_jiffies_stats)) {
+ msecs = (state->berw_usecs + 500) / 1000;
+ state->ber_jiffies_stats = jiffies + msecs_to_jiffies(msecs);
+
+ ber = cx24120_readreg(state, CX24120_REG_BER_HH) << 24;
+ ber |= cx24120_readreg(state, CX24120_REG_BER_HL) << 16;
+ ber |= cx24120_readreg(state, CX24120_REG_BER_LH) << 8;
+ ber |= cx24120_readreg(state, CX24120_REG_BER_LL);
+ dev_dbg(&state->i2c->dev, "read BER index = %d\n", ber);
+
+ c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+ c->post_bit_error.stat[0].uvalue += ber;
+
+ c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+ c->post_bit_count.stat[0].uvalue += CX24120_BER_WSIZE;
+ }
+
+ /* UCB */
+ if (time_after(jiffies, state->per_jiffies_stats)) {
+ state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
+
+ ucb = cx24120_readreg(state, CX24120_REG_UCB_H) << 8;
+ ucb |= cx24120_readreg(state, CX24120_REG_UCB_L);
+ dev_dbg(&state->i2c->dev, "ucblocks = %d\n", ucb);
+
+ /* handle reset */
+ if (ucb < state->ucb_offset)
+ state->ucb_offset = c->block_error.stat[0].uvalue;
+
+ c->block_error.stat[0].scale = FE_SCALE_COUNTER;
+ c->block_error.stat[0].uvalue = ucb + state->ucb_offset;
+
+ c->block_count.stat[0].scale = FE_SCALE_COUNTER;
+ c->block_count.stat[0].uvalue += state->bitrate / 8 / 208;
+ }
+}
+
+static void cx24120_set_clock_ratios(struct dvb_frontend *fe);
+
+/* Read current tuning status */
+static int cx24120_read_status(struct dvb_frontend *fe, enum fe_status *status)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ int lock;
+
+ lock = cx24120_readreg(state, CX24120_REG_STATUS);
+
+ dev_dbg(&state->i2c->dev, "status = 0x%02x\n", lock);
+
+ *status = 0;
+
+ if (lock & CX24120_HAS_SIGNAL)
+ *status = FE_HAS_SIGNAL;
+ if (lock & CX24120_HAS_CARRIER)
+ *status |= FE_HAS_CARRIER;
+ if (lock & CX24120_HAS_VITERBI)
+ *status |= FE_HAS_VITERBI | FE_HAS_SYNC;
+ if (lock & CX24120_HAS_LOCK)
+ *status |= FE_HAS_LOCK;
+
+ /*
+ * TODO: is FE_HAS_SYNC in the right place?
+ * Other cx241xx drivers have this slightly
+ * different
+ */
+
+ state->fe_status = *status;
+ cx24120_get_stats(state);
+
+ /* Set the clock once tuned in */
+ if (state->need_clock_set && *status & FE_HAS_LOCK) {
+ /* Set clock ratios */
+ cx24120_set_clock_ratios(fe);
+
+ /* Old driver would do a msleep(200) here */
+
+ /* Renable mpeg output */
+ if (!state->mpeg_enabled)
+ cx24120_msg_mpeg_output_global_config(state, 1);
+
+ state->need_clock_set = 0;
+ }
+
+ return 0;
+}
+
+/*
+ * FEC & modulation lookup table
+ * Used for decoding the REG_FECMODE register
+ * once tuned in.
+ */
+struct cx24120_modfec {
+ enum fe_delivery_system delsys;
+ enum fe_modulation mod;
+ enum fe_code_rate fec;
+ u8 val;
+};
+
+static const struct cx24120_modfec modfec_lookup_table[] = {
+ /*delsys mod fec val */
+ { SYS_DVBS, QPSK, FEC_1_2, 0x01 },
+ { SYS_DVBS, QPSK, FEC_2_3, 0x02 },
+ { SYS_DVBS, QPSK, FEC_3_4, 0x03 },
+ { SYS_DVBS, QPSK, FEC_4_5, 0x04 },
+ { SYS_DVBS, QPSK, FEC_5_6, 0x05 },
+ { SYS_DVBS, QPSK, FEC_6_7, 0x06 },
+ { SYS_DVBS, QPSK, FEC_7_8, 0x07 },
+
+ { SYS_DVBS2, QPSK, FEC_1_2, 0x04 },
+ { SYS_DVBS2, QPSK, FEC_3_5, 0x05 },
+ { SYS_DVBS2, QPSK, FEC_2_3, 0x06 },
+ { SYS_DVBS2, QPSK, FEC_3_4, 0x07 },
+ { SYS_DVBS2, QPSK, FEC_4_5, 0x08 },
+ { SYS_DVBS2, QPSK, FEC_5_6, 0x09 },
+ { SYS_DVBS2, QPSK, FEC_8_9, 0x0a },
+ { SYS_DVBS2, QPSK, FEC_9_10, 0x0b },
+
+ { SYS_DVBS2, PSK_8, FEC_3_5, 0x0c },
+ { SYS_DVBS2, PSK_8, FEC_2_3, 0x0d },
+ { SYS_DVBS2, PSK_8, FEC_3_4, 0x0e },
+ { SYS_DVBS2, PSK_8, FEC_5_6, 0x0f },
+ { SYS_DVBS2, PSK_8, FEC_8_9, 0x10 },
+ { SYS_DVBS2, PSK_8, FEC_9_10, 0x11 },
+};
+
+/* Retrieve current fec, modulation & pilot values */
+static int cx24120_get_fec(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ int idx;
+ int ret;
+ int fec;
+
+ ret = cx24120_readreg(state, CX24120_REG_FECMODE);
+ fec = ret & 0x3f; /* Lower 6 bits */
+
+ dev_dbg(&state->i2c->dev, "raw fec = %d\n", fec);
+
+ for (idx = 0; idx < ARRAY_SIZE(modfec_lookup_table); idx++) {
+ if (modfec_lookup_table[idx].delsys != state->dcur.delsys)
+ continue;
+ if (modfec_lookup_table[idx].val != fec)
+ continue;
+
+ break; /* found */
+ }
+
+ if (idx >= ARRAY_SIZE(modfec_lookup_table)) {
+ dev_dbg(&state->i2c->dev, "couldn't find fec!\n");
+ return -EINVAL;
+ }
+
+ /* save values back to cache */
+ c->modulation = modfec_lookup_table[idx].mod;
+ c->fec_inner = modfec_lookup_table[idx].fec;
+ c->pilot = (ret & 0x80) ? PILOT_ON : PILOT_OFF;
+
+ dev_dbg(&state->i2c->dev, "mod(%d), fec(%d), pilot(%d)\n",
+ c->modulation, c->fec_inner, c->pilot);
+
+ return 0;
+}
+
+/* Calculate ber window time */
+static void cx24120_calculate_ber_window(struct cx24120_state *state, u32 rate)
+{
+ struct dvb_frontend *fe = &state->frontend;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u64 tmp;
+
+ /*
+ * Calculate bitrate from rate in the clock ratios table.
+ * This isn't *exactly* right but close enough.
+ */
+ tmp = (u64)c->symbol_rate * rate;
+ do_div(tmp, 256);
+ state->bitrate = tmp;
+
+ /* usecs per ber window */
+ tmp = 1000000ULL * CX24120_BER_WSIZE;
+ do_div(tmp, state->bitrate);
+ state->berw_usecs = tmp;
+
+ dev_dbg(&state->i2c->dev, "bitrate: %u, berw_usecs: %u\n",
+ state->bitrate, state->berw_usecs);
+}
+
+/*
+ * Clock ratios lookup table
+ *
+ * Values obtained from much larger table in old driver
+ * which had numerous entries which would never match.
+ *
+ * There's probably some way of calculating these but I
+ * can't determine the pattern
+ */
+struct cx24120_clock_ratios_table {
+ enum fe_delivery_system delsys;
+ enum fe_pilot pilot;
+ enum fe_modulation mod;
+ enum fe_code_rate fec;
+ u32 m_rat;
+ u32 n_rat;
+ u32 rate;
+};
+
+static const struct cx24120_clock_ratios_table clock_ratios_table[] = {
+ /*delsys pilot mod fec m_rat n_rat rate */
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_1_2, 273088, 254505, 274 },
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_3_5, 17272, 13395, 330 },
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_2_3, 24344, 16967, 367 },
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_3_4, 410788, 254505, 413 },
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_4_5, 438328, 254505, 440 },
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_5_6, 30464, 16967, 459 },
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_8_9, 487832, 254505, 490 },
+ { SYS_DVBS2, PILOT_OFF, QPSK, FEC_9_10, 493952, 254505, 496 },
+ { SYS_DVBS2, PILOT_OFF, PSK_8, FEC_3_5, 328168, 169905, 494 },
+ { SYS_DVBS2, PILOT_OFF, PSK_8, FEC_2_3, 24344, 11327, 550 },
+ { SYS_DVBS2, PILOT_OFF, PSK_8, FEC_3_4, 410788, 169905, 618 },
+ { SYS_DVBS2, PILOT_OFF, PSK_8, FEC_5_6, 30464, 11327, 688 },
+ { SYS_DVBS2, PILOT_OFF, PSK_8, FEC_8_9, 487832, 169905, 735 },
+ { SYS_DVBS2, PILOT_OFF, PSK_8, FEC_9_10, 493952, 169905, 744 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_1_2, 273088, 260709, 268 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_3_5, 328168, 260709, 322 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_2_3, 121720, 86903, 358 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_3_4, 410788, 260709, 403 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_4_5, 438328, 260709, 430 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_5_6, 152320, 86903, 448 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_8_9, 487832, 260709, 479 },
+ { SYS_DVBS2, PILOT_ON, QPSK, FEC_9_10, 493952, 260709, 485 },
+ { SYS_DVBS2, PILOT_ON, PSK_8, FEC_3_5, 328168, 173853, 483 },
+ { SYS_DVBS2, PILOT_ON, PSK_8, FEC_2_3, 121720, 57951, 537 },
+ { SYS_DVBS2, PILOT_ON, PSK_8, FEC_3_4, 410788, 173853, 604 },
+ { SYS_DVBS2, PILOT_ON, PSK_8, FEC_5_6, 152320, 57951, 672 },
+ { SYS_DVBS2, PILOT_ON, PSK_8, FEC_8_9, 487832, 173853, 718 },
+ { SYS_DVBS2, PILOT_ON, PSK_8, FEC_9_10, 493952, 173853, 727 },
+ { SYS_DVBS, PILOT_OFF, QPSK, FEC_1_2, 152592, 152592, 256 },
+ { SYS_DVBS, PILOT_OFF, QPSK, FEC_2_3, 305184, 228888, 341 },
+ { SYS_DVBS, PILOT_OFF, QPSK, FEC_3_4, 457776, 305184, 384 },
+ { SYS_DVBS, PILOT_OFF, QPSK, FEC_5_6, 762960, 457776, 427 },
+ { SYS_DVBS, PILOT_OFF, QPSK, FEC_7_8, 1068144, 610368, 448 },
+};
+
+/* Set clock ratio from lookup table */
+static void cx24120_set_clock_ratios(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ int ret, idx;
+
+ /* Find fec, modulation, pilot */
+ ret = cx24120_get_fec(fe);
+ if (ret != 0)
+ return;
+
+ /* Find the clock ratios in the lookup table */
+ for (idx = 0; idx < ARRAY_SIZE(clock_ratios_table); idx++) {
+ if (clock_ratios_table[idx].delsys != state->dcur.delsys)
+ continue;
+ if (clock_ratios_table[idx].mod != c->modulation)
+ continue;
+ if (clock_ratios_table[idx].fec != c->fec_inner)
+ continue;
+ if (clock_ratios_table[idx].pilot != c->pilot)
+ continue;
+
+ break; /* found */
+ }
+
+ if (idx >= ARRAY_SIZE(clock_ratios_table)) {
+ info("Clock ratio not found - data reception in danger\n");
+ return;
+ }
+
+ /* Read current values? */
+ cmd.id = CMD_CLOCK_READ;
+ cmd.len = 1;
+ cmd.arg[0] = 0x00;
+ ret = cx24120_message_sendrcv(state, &cmd, 6);
+ if (ret != 0)
+ return;
+ /* in cmd[0]-[5] - result */
+
+ dev_dbg(&state->i2c->dev, "m=%d, n=%d; idx: %d m=%d, n=%d, rate=%d\n",
+ cmd.arg[2] | (cmd.arg[1] << 8) | (cmd.arg[0] << 16),
+ cmd.arg[5] | (cmd.arg[4] << 8) | (cmd.arg[3] << 16),
+ idx,
+ clock_ratios_table[idx].m_rat,
+ clock_ratios_table[idx].n_rat,
+ clock_ratios_table[idx].rate);
+
+ /* Set the clock */
+ cmd.id = CMD_CLOCK_SET;
+ cmd.len = 10;
+ cmd.arg[0] = 0;
+ cmd.arg[1] = 0x10;
+ cmd.arg[2] = (clock_ratios_table[idx].m_rat >> 16) & 0xff;
+ cmd.arg[3] = (clock_ratios_table[idx].m_rat >> 8) & 0xff;
+ cmd.arg[4] = (clock_ratios_table[idx].m_rat >> 0) & 0xff;
+ cmd.arg[5] = (clock_ratios_table[idx].n_rat >> 16) & 0xff;
+ cmd.arg[6] = (clock_ratios_table[idx].n_rat >> 8) & 0xff;
+ cmd.arg[7] = (clock_ratios_table[idx].n_rat >> 0) & 0xff;
+ cmd.arg[8] = (clock_ratios_table[idx].rate >> 8) & 0xff;
+ cmd.arg[9] = (clock_ratios_table[idx].rate >> 0) & 0xff;
+
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0)
+ return;
+
+ /* Calculate ber window rates for stat work */
+ cx24120_calculate_ber_window(state, clock_ratios_table[idx].rate);
+}
+
+/* Set inversion value */
+static int cx24120_set_inversion(struct cx24120_state *state,
+ enum fe_spectral_inversion inversion)
+{
+ dev_dbg(&state->i2c->dev, "(%d)\n", inversion);
+
+ switch (inversion) {
+ case INVERSION_OFF:
+ state->dnxt.inversion_val = 0x00;
+ break;
+ case INVERSION_ON:
+ state->dnxt.inversion_val = 0x04;
+ break;
+ case INVERSION_AUTO:
+ state->dnxt.inversion_val = 0x0c;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ state->dnxt.inversion = inversion;
+
+ return 0;
+}
+
+/* FEC lookup table for tuning */
+struct cx24120_modfec_table {
+ enum fe_delivery_system delsys;
+ enum fe_modulation mod;
+ enum fe_code_rate fec;
+ u8 val;
+};
+
+static const struct cx24120_modfec_table modfec_table[] = {
+ /*delsys mod fec val */
+ { SYS_DVBS, QPSK, FEC_1_2, 0x2e },
+ { SYS_DVBS, QPSK, FEC_2_3, 0x2f },
+ { SYS_DVBS, QPSK, FEC_3_4, 0x30 },
+ { SYS_DVBS, QPSK, FEC_5_6, 0x31 },
+ { SYS_DVBS, QPSK, FEC_6_7, 0x32 },
+ { SYS_DVBS, QPSK, FEC_7_8, 0x33 },
+
+ { SYS_DVBS2, QPSK, FEC_1_2, 0x04 },
+ { SYS_DVBS2, QPSK, FEC_3_5, 0x05 },
+ { SYS_DVBS2, QPSK, FEC_2_3, 0x06 },
+ { SYS_DVBS2, QPSK, FEC_3_4, 0x07 },
+ { SYS_DVBS2, QPSK, FEC_4_5, 0x08 },
+ { SYS_DVBS2, QPSK, FEC_5_6, 0x09 },
+ { SYS_DVBS2, QPSK, FEC_8_9, 0x0a },
+ { SYS_DVBS2, QPSK, FEC_9_10, 0x0b },
+
+ { SYS_DVBS2, PSK_8, FEC_3_5, 0x0c },
+ { SYS_DVBS2, PSK_8, FEC_2_3, 0x0d },
+ { SYS_DVBS2, PSK_8, FEC_3_4, 0x0e },
+ { SYS_DVBS2, PSK_8, FEC_5_6, 0x0f },
+ { SYS_DVBS2, PSK_8, FEC_8_9, 0x10 },
+ { SYS_DVBS2, PSK_8, FEC_9_10, 0x11 },
+};
+
+/* Set fec_val & fec_mask values from delsys, modulation & fec */
+static int cx24120_set_fec(struct cx24120_state *state, enum fe_modulation mod,
+ enum fe_code_rate fec)
+{
+ int idx;
+
+ dev_dbg(&state->i2c->dev, "(0x%02x,0x%02x)\n", mod, fec);
+
+ state->dnxt.fec = fec;
+
+ /* Lookup fec_val from modfec table */
+ for (idx = 0; idx < ARRAY_SIZE(modfec_table); idx++) {
+ if (modfec_table[idx].delsys != state->dnxt.delsys)
+ continue;
+ if (modfec_table[idx].mod != mod)
+ continue;
+ if (modfec_table[idx].fec != fec)
+ continue;
+
+ /* found */
+ state->dnxt.fec_mask = 0x00;
+ state->dnxt.fec_val = modfec_table[idx].val;
+ return 0;
+ }
+
+ if (state->dnxt.delsys == SYS_DVBS2) {
+ /* DVBS2 auto is 0x00/0x00 */
+ state->dnxt.fec_mask = 0x00;
+ state->dnxt.fec_val = 0x00;
+ } else {
+ /* Set DVB-S to auto */
+ state->dnxt.fec_val = 0x2e;
+ state->dnxt.fec_mask = 0xac;
+ }
+
+ return 0;
+}
+
+/* Set pilot */
+static int cx24120_set_pilot(struct cx24120_state *state, enum fe_pilot pilot)
+{
+ dev_dbg(&state->i2c->dev, "(%d)\n", pilot);
+
+ /* Pilot only valid in DVBS2 */
+ if (state->dnxt.delsys != SYS_DVBS2) {
+ state->dnxt.pilot_val = CX24120_PILOT_OFF;
+ return 0;
+ }
+
+ switch (pilot) {
+ case PILOT_OFF:
+ state->dnxt.pilot_val = CX24120_PILOT_OFF;
+ break;
+ case PILOT_ON:
+ state->dnxt.pilot_val = CX24120_PILOT_ON;
+ break;
+ case PILOT_AUTO:
+ default:
+ state->dnxt.pilot_val = CX24120_PILOT_AUTO;
+ }
+
+ return 0;
+}
+
+/* Set symbol rate */
+static int cx24120_set_symbolrate(struct cx24120_state *state, u32 rate)
+{
+ dev_dbg(&state->i2c->dev, "(%d)\n", rate);
+
+ state->dnxt.symbol_rate = rate;
+
+ /* Check symbol rate */
+ if (rate > 31000000) {
+ state->dnxt.clkdiv = (-(rate < 31000001) & 3) + 2;
+ state->dnxt.ratediv = (-(rate < 31000001) & 6) + 4;
+ } else {
+ state->dnxt.clkdiv = 3;
+ state->dnxt.ratediv = 6;
+ }
+
+ return 0;
+}
+
+/* Overwrite the current tuning params, we are about to tune */
+static void cx24120_clone_params(struct dvb_frontend *fe)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+
+ state->dcur = state->dnxt;
+}
+
+static int cx24120_set_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ int ret;
+
+ switch (c->delivery_system) {
+ case SYS_DVBS2:
+ dev_dbg(&state->i2c->dev, "DVB-S2\n");
+ break;
+ case SYS_DVBS:
+ dev_dbg(&state->i2c->dev, "DVB-S\n");
+ break;
+ default:
+ dev_dbg(&state->i2c->dev,
+ "delivery system(%d) not supported\n",
+ c->delivery_system);
+ return -EINVAL;
+ }
+
+ state->dnxt.delsys = c->delivery_system;
+ state->dnxt.modulation = c->modulation;
+ state->dnxt.frequency = c->frequency;
+ state->dnxt.pilot = c->pilot;
+
+ ret = cx24120_set_inversion(state, c->inversion);
+ if (ret != 0)
+ return ret;
+
+ ret = cx24120_set_fec(state, c->modulation, c->fec_inner);
+ if (ret != 0)
+ return ret;
+
+ ret = cx24120_set_pilot(state, c->pilot);
+ if (ret != 0)
+ return ret;
+
+ ret = cx24120_set_symbolrate(state, c->symbol_rate);
+ if (ret != 0)
+ return ret;
+
+ /* discard the 'current' tuning parameters and prepare to tune */
+ cx24120_clone_params(fe);
+
+ dev_dbg(&state->i2c->dev,
+ "delsys = %d\n", state->dcur.delsys);
+ dev_dbg(&state->i2c->dev,
+ "modulation = %d\n", state->dcur.modulation);
+ dev_dbg(&state->i2c->dev,
+ "frequency = %d\n", state->dcur.frequency);
+ dev_dbg(&state->i2c->dev,
+ "pilot = %d (val = 0x%02x)\n",
+ state->dcur.pilot, state->dcur.pilot_val);
+ dev_dbg(&state->i2c->dev,
+ "symbol_rate = %d (clkdiv/ratediv = 0x%02x/0x%02x)\n",
+ state->dcur.symbol_rate,
+ state->dcur.clkdiv, state->dcur.ratediv);
+ dev_dbg(&state->i2c->dev,
+ "FEC = %d (mask/val = 0x%02x/0x%02x)\n",
+ state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val);
+ dev_dbg(&state->i2c->dev,
+ "Inversion = %d (val = 0x%02x)\n",
+ state->dcur.inversion, state->dcur.inversion_val);
+
+ /* Flag that clock needs to be set after tune */
+ state->need_clock_set = 1;
+
+ /* Tune in */
+ cmd.id = CMD_TUNEREQUEST;
+ cmd.len = 15;
+ cmd.arg[0] = 0;
+ cmd.arg[1] = (state->dcur.frequency & 0xff0000) >> 16;
+ cmd.arg[2] = (state->dcur.frequency & 0x00ff00) >> 8;
+ cmd.arg[3] = (state->dcur.frequency & 0x0000ff);
+ cmd.arg[4] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8;
+ cmd.arg[5] = ((state->dcur.symbol_rate / 1000) & 0x00ff);
+ cmd.arg[6] = state->dcur.inversion;
+ cmd.arg[7] = state->dcur.fec_val | state->dcur.pilot_val;
+ cmd.arg[8] = CX24120_SEARCH_RANGE_KHZ >> 8;
+ cmd.arg[9] = CX24120_SEARCH_RANGE_KHZ & 0xff;
+ cmd.arg[10] = 0; /* maybe rolloff? */
+ cmd.arg[11] = state->dcur.fec_mask;
+ cmd.arg[12] = state->dcur.ratediv;
+ cmd.arg[13] = state->dcur.clkdiv;
+ cmd.arg[14] = 0;
+
+ /* Send tune command */
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0)
+ return ret;
+
+ /* Write symbol rate values */
+ ret = cx24120_writereg(state, CX24120_REG_CLKDIV, state->dcur.clkdiv);
+ ret = cx24120_readreg(state, CX24120_REG_RATEDIV);
+ ret &= 0xfffffff0;
+ ret |= state->dcur.ratediv;
+ ret = cx24120_writereg(state, CX24120_REG_RATEDIV, ret);
+
+ return 0;
+}
+
+/* Set vco from config */
+static int cx24120_set_vco(struct cx24120_state *state)
+{
+ struct cx24120_cmd cmd;
+ u32 nxtal_khz, vco;
+ u64 inv_vco;
+ u32 xtal_khz = state->config->xtal_khz;
+
+ nxtal_khz = xtal_khz * 4;
+ vco = nxtal_khz * 10;
+ inv_vco = DIV_ROUND_CLOSEST_ULL(0x400000000ULL, vco);
+
+ dev_dbg(&state->i2c->dev, "xtal=%d, vco=%d, inv_vco=%lld\n",
+ xtal_khz, vco, inv_vco);
+
+ cmd.id = CMD_VCO_SET;
+ cmd.len = 12;
+ cmd.arg[0] = (vco >> 16) & 0xff;
+ cmd.arg[1] = (vco >> 8) & 0xff;
+ cmd.arg[2] = vco & 0xff;
+ cmd.arg[3] = (inv_vco >> 8) & 0xff;
+ cmd.arg[4] = (inv_vco) & 0xff;
+ cmd.arg[5] = 0x03;
+ cmd.arg[6] = (nxtal_khz >> 8) & 0xff;
+ cmd.arg[7] = nxtal_khz & 0xff;
+ cmd.arg[8] = 0x06;
+ cmd.arg[9] = 0x03;
+ cmd.arg[10] = (xtal_khz >> 16) & 0xff;
+ cmd.arg[11] = xtal_khz & 0xff;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+static int cx24120_init(struct dvb_frontend *fe)
+{
+ const struct firmware *fw;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ u8 reg;
+ int ret, i;
+ unsigned char vers[4];
+
+ if (state->cold_init)
+ return 0;
+
+ /* ???? */
+ cx24120_writereg(state, 0xea, 0x00);
+ cx24120_test_rom(state);
+ reg = cx24120_readreg(state, 0xfb) & 0xfe;
+ cx24120_writereg(state, 0xfb, reg);
+ reg = cx24120_readreg(state, 0xfc) & 0xfe;
+ cx24120_writereg(state, 0xfc, reg);
+ cx24120_writereg(state, 0xc3, 0x04);
+ cx24120_writereg(state, 0xc4, 0x04);
+ cx24120_writereg(state, 0xce, 0x00);
+ cx24120_writereg(state, 0xcf, 0x00);
+ reg = cx24120_readreg(state, 0xea) & 0xfe;
+ cx24120_writereg(state, 0xea, reg);
+ cx24120_writereg(state, 0xeb, 0x0c);
+ cx24120_writereg(state, 0xec, 0x06);
+ cx24120_writereg(state, 0xed, 0x05);
+ cx24120_writereg(state, 0xee, 0x03);
+ cx24120_writereg(state, 0xef, 0x05);
+ cx24120_writereg(state, 0xf3, 0x03);
+ cx24120_writereg(state, 0xf4, 0x44);
+
+ for (i = 0; i < 3; i++) {
+ cx24120_writereg(state, 0xf0 + i, 0x04);
+ cx24120_writereg(state, 0xe6 + i, 0x02);
+ }
+
+ cx24120_writereg(state, 0xea, (reg | 0x01));
+ for (i = 0; i < 6; i += 2) {
+ cx24120_writereg(state, 0xc5 + i, 0x00);
+ cx24120_writereg(state, 0xc6 + i, 0x00);
+ }
+
+ cx24120_writereg(state, 0xe4, 0x03);
+ cx24120_writereg(state, 0xeb, 0x0a);
+
+ dev_dbg(&state->i2c->dev, "requesting firmware (%s) to download...\n",
+ CX24120_FIRMWARE);
+
+ ret = state->config->request_firmware(fe, &fw, CX24120_FIRMWARE);
+ if (ret) {
+ err("Could not load firmware (%s): %d\n", CX24120_FIRMWARE,
+ ret);
+ return ret;
+ }
+
+ dev_dbg(&state->i2c->dev,
+ "Firmware found, size %d bytes (%02x %02x .. %02x %02x)\n",
+ (int)fw->size, /* firmware_size in bytes */
+ fw->data[0], /* fw 1st byte */
+ fw->data[1], /* fw 2d byte */
+ fw->data[fw->size - 2], /* fw before last byte */
+ fw->data[fw->size - 1]); /* fw last byte */
+
+ cx24120_test_rom(state);
+ reg = cx24120_readreg(state, 0xfb) & 0xfe;
+ cx24120_writereg(state, 0xfb, reg);
+ cx24120_writereg(state, 0xe0, 0x76);
+ cx24120_writereg(state, 0xf7, 0x81);
+ cx24120_writereg(state, 0xf8, 0x00);
+ cx24120_writereg(state, 0xf9, 0x00);
+ cx24120_writeregs(state, 0xfa, fw->data, (fw->size - 1), 0x00);
+ cx24120_writereg(state, 0xf7, 0xc0);
+ cx24120_writereg(state, 0xe0, 0x00);
+ reg = (fw->size - 2) & 0x00ff;
+ cx24120_writereg(state, 0xf8, reg);
+ reg = ((fw->size - 2) >> 8) & 0x00ff;
+ cx24120_writereg(state, 0xf9, reg);
+ cx24120_writereg(state, 0xf7, 0x00);
+ cx24120_writereg(state, 0xdc, 0x00);
+ cx24120_writereg(state, 0xdc, 0x07);
+ msleep(500);
+
+ /* Check final byte matches final byte of firmware */
+ reg = cx24120_readreg(state, 0xe1);
+ if (reg == fw->data[fw->size - 1]) {
+ dev_dbg(&state->i2c->dev, "Firmware uploaded successfully\n");
+ ret = 0;
+ } else {
+ err("Firmware upload failed. Last byte returned=0x%x\n", ret);
+ ret = -EREMOTEIO;
+ }
+ cx24120_writereg(state, 0xdc, 0x00);
+ release_firmware(fw);
+ if (ret != 0)
+ return ret;
+
+ /* Start tuner */
+ cmd.id = CMD_START_TUNER;
+ cmd.len = 3;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x00;
+
+ if (cx24120_message_send(state, &cmd) != 0) {
+ err("Error tuner start! :(\n");
+ return -EREMOTEIO;
+ }
+
+ /* Set VCO */
+ ret = cx24120_set_vco(state);
+ if (ret != 0) {
+ err("Error set VCO! :(\n");
+ return ret;
+ }
+
+ /* set bandwidth */
+ cmd.id = CMD_BANDWIDTH;
+ cmd.len = 12;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x00;
+ cmd.arg[3] = 0x00;
+ cmd.arg[4] = 0x05;
+ cmd.arg[5] = 0x02;
+ cmd.arg[6] = 0x02;
+ cmd.arg[7] = 0x00;
+ cmd.arg[8] = 0x05;
+ cmd.arg[9] = 0x02;
+ cmd.arg[10] = 0x02;
+ cmd.arg[11] = 0x00;
+
+ if (cx24120_message_send(state, &cmd)) {
+ err("Error set bandwidth!\n");
+ return -EREMOTEIO;
+ }
+
+ reg = cx24120_readreg(state, 0xba);
+ if (reg > 3) {
+ dev_dbg(&state->i2c->dev, "Reset-readreg 0xba: %x\n", ret);
+ err("Error initialising tuner!\n");
+ return -EREMOTEIO;
+ }
+
+ dev_dbg(&state->i2c->dev, "Tuner initialised correctly.\n");
+
+ /* Initialise mpeg outputs */
+ cx24120_writereg(state, 0xeb, 0x0a);
+ if (cx24120_msg_mpeg_output_global_config(state, 0) ||
+ cx24120_msg_mpeg_output_config(state, 0) ||
+ cx24120_msg_mpeg_output_config(state, 1) ||
+ cx24120_msg_mpeg_output_config(state, 2)) {
+ err("Error initialising mpeg output. :(\n");
+ return -EREMOTEIO;
+ }
+
+ /* Set size of BER window */
+ cmd.id = CMD_BER_CTRL;
+ cmd.len = 3;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = CX24120_BER_WINDOW;
+ cmd.arg[2] = CX24120_BER_WINDOW;
+ if (cx24120_message_send(state, &cmd)) {
+ err("Error setting ber window\n");
+ return -EREMOTEIO;
+ }
+
+ /* Firmware CMD 35: Get firmware version */
+ cmd.id = CMD_FWVERSION;
+ cmd.len = 1;
+ for (i = 0; i < 4; i++) {
+ cmd.arg[0] = i;
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0)
+ return ret;
+ vers[i] = cx24120_readreg(state, CX24120_REG_MAILBOX);
+ }
+ info("FW version %i.%i.%i.%i\n", vers[0], vers[1], vers[2], vers[3]);
+
+ /* init stats here in order signal app which stats are supported */
+ c->strength.len = 1;
+ c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->cnr.len = 1;
+ c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->post_bit_error.len = 1;
+ c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->post_bit_count.len = 1;
+ c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->block_error.len = 1;
+ c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+ c->block_count.len = 1;
+ c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+ state->cold_init = 1;
+
+ return 0;
+}
+
+static int cx24120_tune(struct dvb_frontend *fe, bool re_tune,
+ unsigned int mode_flags, unsigned int *delay,
+ enum fe_status *status)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ int ret;
+
+ dev_dbg(&state->i2c->dev, "(%d)\n", re_tune);
+
+ /* TODO: Do we need to set delay? */
+
+ if (re_tune) {
+ ret = cx24120_set_frontend(fe);
+ if (ret)
+ return ret;
+ }
+
+ return cx24120_read_status(fe, status);
+}
+
+static enum dvbfe_algo cx24120_get_algo(struct dvb_frontend *fe)
+{
+ return DVBFE_ALGO_HW;
+}
+
+static int cx24120_sleep(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+static int cx24120_get_frontend(struct dvb_frontend *fe,
+ struct dtv_frontend_properties *c)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ u8 freq1, freq2, freq3;
+ int status;
+
+ dev_dbg(&state->i2c->dev, "\n");
+
+ /* don't return empty data if we're not tuned in */
+ status = cx24120_readreg(state, CX24120_REG_STATUS);
+ if (!(status & CX24120_HAS_LOCK))
+ return 0;
+
+ /* Get frequency */
+ freq1 = cx24120_readreg(state, CX24120_REG_FREQ1);
+ freq2 = cx24120_readreg(state, CX24120_REG_FREQ2);
+ freq3 = cx24120_readreg(state, CX24120_REG_FREQ3);
+ c->frequency = (freq3 << 16) | (freq2 << 8) | freq1;
+ dev_dbg(&state->i2c->dev, "frequency = %d\n", c->frequency);
+
+ /* Get modulation, fec, pilot */
+ cx24120_get_fec(fe);
+
+ return 0;
+}
+
+static void cx24120_release(struct dvb_frontend *fe)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+
+ dev_dbg(&state->i2c->dev, "Clear state structure\n");
+ kfree(state);
+}
+
+static int cx24120_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ if (c->block_error.stat[0].scale != FE_SCALE_COUNTER) {
+ *ucblocks = 0;
+ return 0;
+ }
+
+ *ucblocks = c->block_error.stat[0].uvalue - state->ucb_offset;
+
+ return 0;
+}
+
+static const struct dvb_frontend_ops cx24120_ops = {
+ .delsys = { SYS_DVBS, SYS_DVBS2 },
+ .info = {
+ .name = "Conexant CX24120/CX24118",
+ .frequency_min_hz = 950 * MHz,
+ .frequency_max_hz = 2150 * MHz,
+ .frequency_stepsize_hz = 1011 * kHz,
+ .frequency_tolerance_hz = 5 * MHz,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_2G_MODULATION |
+ FE_CAN_QPSK | FE_CAN_RECOVER
+ },
+ .release = cx24120_release,
+
+ .init = cx24120_init,
+ .sleep = cx24120_sleep,
+
+ .tune = cx24120_tune,
+ .get_frontend_algo = cx24120_get_algo,
+ .set_frontend = cx24120_set_frontend,
+
+ .get_frontend = cx24120_get_frontend,
+ .read_status = cx24120_read_status,
+ .read_ber = cx24120_read_ber,
+ .read_signal_strength = cx24120_read_signal_strength,
+ .read_snr = cx24120_read_snr,
+ .read_ucblocks = cx24120_read_ucblocks,
+
+ .diseqc_send_master_cmd = cx24120_send_diseqc_msg,
+
+ .diseqc_send_burst = cx24120_diseqc_send_burst,
+ .set_tone = cx24120_set_tone,
+ .set_voltage = cx24120_set_voltage,
+};
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant CX24120/CX24118 hardware");
+MODULE_AUTHOR("Jemma Denson");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 04:58:10 +0000