diff options
Diffstat (limited to 'drivers/media/dvb-frontends/drx39xyj/drx_driver.h')
| -rw-r--r-- | drivers/media/dvb-frontends/drx39xyj/drx_driver.h | 2328 |
1 files changed, 2328 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h new file mode 100644 index 000000000..15f7e58c5 --- /dev/null +++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h @@ -0,0 +1,2328 @@ +/* + Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + * Neither the name of Trident Microsystems nor Hauppauge Computer Works + nor the names of its contributors may be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +#ifndef __DRXDRIVER_H__ +#define __DRXDRIVER_H__ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/firmware.h> +#include <linux/i2c.h> + +/* + * This structure contains the I2C address, the device ID and a user_data pointer. + * The user_data pointer can be used for application specific purposes. + */ +struct i2c_device_addr { + u16 i2c_addr; /* The I2C address of the device. */ + u16 i2c_dev_id; /* The device identifier. */ + void *user_data; /* User data pointer */ +}; + +/* +* \def IS_I2C_10BIT( addr ) +* \brief Determine if I2C address 'addr' is a 10 bits address or not. +* \param addr The I2C address. +* \return int. +* \retval 0 if address is not a 10 bits I2C address. +* \retval 1 if address is a 10 bits I2C address. +*/ +#define IS_I2C_10BIT(addr) \ + (((addr) & 0xF8) == 0xF0) + +/*------------------------------------------------------------------------------ +Exported FUNCTIONS +------------------------------------------------------------------------------*/ + +/* +* \fn drxbsp_i2c_init() +* \brief Initialize I2C communication module. +* \return int Return status. +* \retval 0 Initialization successful. +* \retval -EIO Initialization failed. +*/ +int drxbsp_i2c_init(void); + +/* +* \fn drxbsp_i2c_term() +* \brief Terminate I2C communication module. +* \return int Return status. +* \retval 0 Termination successful. +* \retval -EIO Termination failed. +*/ +int drxbsp_i2c_term(void); + +/* +* \fn int drxbsp_i2c_write_read( struct i2c_device_addr *w_dev_addr, +* u16 w_count, +* u8 * wData, +* struct i2c_device_addr *r_dev_addr, +* u16 r_count, +* u8 * r_data) +* \brief Read and/or write count bytes from I2C bus, store them in data[]. +* \param w_dev_addr The device i2c address and the device ID to write to +* \param w_count The number of bytes to write +* \param wData The array to write the data to +* \param r_dev_addr The device i2c address and the device ID to read from +* \param r_count The number of bytes to read +* \param r_data The array to read the data from +* \return int Return status. +* \retval 0 Success. +* \retval -EIO Failure. +* \retval -EINVAL Parameter 'wcount' is not zero but parameter +* 'wdata' contains NULL. +* Idem for 'rcount' and 'rdata'. +* Both w_dev_addr and r_dev_addr are NULL. +* +* This function must implement an atomic write and/or read action on the I2C bus +* No other process may use the I2C bus when this function is executing. +* The critical section of this function runs from and including the I2C +* write, up to and including the I2C read action. +* +* The device ID can be useful if several devices share an I2C address. +* It can be used to control a "switch" on the I2C bus to the correct device. +*/ +int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr, + u16 w_count, + u8 *wData, + struct i2c_device_addr *r_dev_addr, + u16 r_count, u8 *r_data); + +/* +* \fn drxbsp_i2c_error_text() +* \brief Returns a human readable error. +* Counter part of numerical drx_i2c_error_g. +* +* \return char* Pointer to human readable error text. +*/ +char *drxbsp_i2c_error_text(void); + +/* +* \var drx_i2c_error_g; +* \brief I2C specific error codes, platform dependent. +*/ +extern int drx_i2c_error_g; + +#define TUNER_MODE_SUB0 0x0001 /* for sub-mode (e.g. RF-AGC setting) */ +#define TUNER_MODE_SUB1 0x0002 /* for sub-mode (e.g. RF-AGC setting) */ +#define TUNER_MODE_SUB2 0x0004 /* for sub-mode (e.g. RF-AGC setting) */ +#define TUNER_MODE_SUB3 0x0008 /* for sub-mode (e.g. RF-AGC setting) */ +#define TUNER_MODE_SUB4 0x0010 /* for sub-mode (e.g. RF-AGC setting) */ +#define TUNER_MODE_SUB5 0x0020 /* for sub-mode (e.g. RF-AGC setting) */ +#define TUNER_MODE_SUB6 0x0040 /* for sub-mode (e.g. RF-AGC setting) */ +#define TUNER_MODE_SUB7 0x0080 /* for sub-mode (e.g. RF-AGC setting) */ + +#define TUNER_MODE_DIGITAL 0x0100 /* for digital channel (e.g. DVB-T) */ +#define TUNER_MODE_ANALOG 0x0200 /* for analog channel (e.g. PAL) */ +#define TUNER_MODE_SWITCH 0x0400 /* during channel switch & scanning */ +#define TUNER_MODE_LOCK 0x0800 /* after tuner has locked */ +#define TUNER_MODE_6MHZ 0x1000 /* for 6MHz bandwidth channels */ +#define TUNER_MODE_7MHZ 0x2000 /* for 7MHz bandwidth channels */ +#define TUNER_MODE_8MHZ 0x4000 /* for 8MHz bandwidth channels */ + +#define TUNER_MODE_SUB_MAX 8 +#define TUNER_MODE_SUBALL (TUNER_MODE_SUB0 | TUNER_MODE_SUB1 | \ + TUNER_MODE_SUB2 | TUNER_MODE_SUB3 | \ + TUNER_MODE_SUB4 | TUNER_MODE_SUB5 | \ + TUNER_MODE_SUB6 | TUNER_MODE_SUB7) + + +enum tuner_lock_status { + TUNER_LOCKED, + TUNER_NOT_LOCKED +}; + +struct tuner_common { + char *name; /* Tuner brand & type name */ + s32 min_freq_rf; /* Lowest RF input frequency, in kHz */ + s32 max_freq_rf; /* Highest RF input frequency, in kHz */ + + u8 sub_mode; /* Index to sub-mode in use */ + char ***sub_mode_descriptions; /* Pointer to description of sub-modes */ + u8 sub_modes; /* Number of available sub-modes */ + + /* The following fields will be either 0, NULL or false and do not need + initialisation */ + void *self_check; /* gives proof of initialization */ + bool programmed; /* only valid if self_check is OK */ + s32 r_ffrequency; /* only valid if programmed */ + s32 i_ffrequency; /* only valid if programmed */ + + void *my_user_data; /* pointer to associated demod instance */ + u16 my_capabilities; /* value for storing application flags */ +}; + +struct tuner_instance; + +typedef int(*tuner_open_func_t) (struct tuner_instance *tuner); +typedef int(*tuner_close_func_t) (struct tuner_instance *tuner); + +typedef int(*tuner_set_frequency_func_t) (struct tuner_instance *tuner, + u32 mode, + s32 + frequency); + +typedef int(*tuner_get_frequency_func_t) (struct tuner_instance *tuner, + u32 mode, + s32 * + r_ffrequency, + s32 * + i_ffrequency); + +typedef int(*tuner_lock_status_func_t) (struct tuner_instance *tuner, + enum tuner_lock_status * + lock_stat); + +typedef int(*tune_ri2c_write_read_func_t) (struct tuner_instance *tuner, + struct i2c_device_addr * + w_dev_addr, u16 w_count, + u8 *wData, + struct i2c_device_addr * + r_dev_addr, u16 r_count, + u8 *r_data); + +struct tuner_ops { + tuner_open_func_t open_func; + tuner_close_func_t close_func; + tuner_set_frequency_func_t set_frequency_func; + tuner_get_frequency_func_t get_frequency_func; + tuner_lock_status_func_t lock_status_func; + tune_ri2c_write_read_func_t i2c_write_read_func; + +}; + +struct tuner_instance { + struct i2c_device_addr my_i2c_dev_addr; + struct tuner_common *my_common_attr; + void *my_ext_attr; + struct tuner_ops *my_funct; +}; + +int drxbsp_tuner_set_frequency(struct tuner_instance *tuner, + u32 mode, + s32 frequency); + +int drxbsp_tuner_get_frequency(struct tuner_instance *tuner, + u32 mode, + s32 *r_ffrequency, + s32 *i_ffrequency); + +int drxbsp_tuner_default_i2c_write_read(struct tuner_instance *tuner, + struct i2c_device_addr *w_dev_addr, + u16 w_count, + u8 *wData, + struct i2c_device_addr *r_dev_addr, + u16 r_count, u8 *r_data); + +/************* +* +* This section configures the DRX Data Access Protocols (DAPs). +* +**************/ + +/* +* \def DRXDAP_SINGLE_MASTER +* \brief Enable I2C single or I2C multimaster mode on host. +* +* Set to 1 to enable single master mode +* Set to 0 to enable multi master mode +* +* The actual DAP implementation may be restricted to only one of the modes. +* A compiler warning or error will be generated if the DAP implementation +* overrides or cannot handle the mode defined below. +*/ +#ifndef DRXDAP_SINGLE_MASTER +#define DRXDAP_SINGLE_MASTER 1 +#endif + +/* +* \def DRXDAP_MAX_WCHUNKSIZE +* \brief Defines maximum chunksize of an i2c write action by host. +* +* This indicates the maximum size of data the I2C device driver is able to +* write at a time. This includes I2C device address and register addressing. +* +* This maximum size may be restricted by the actual DAP implementation. +* A compiler warning or error will be generated if the DAP implementation +* overrides or cannot handle the chunksize defined below. +* +* Beware that the DAP uses DRXDAP_MAX_WCHUNKSIZE to create a temporary data +* buffer. Do not undefine or choose too large, unless your system is able to +* handle a stack buffer of that size. +* +*/ +#ifndef DRXDAP_MAX_WCHUNKSIZE +#define DRXDAP_MAX_WCHUNKSIZE 60 +#endif + +/* +* \def DRXDAP_MAX_RCHUNKSIZE +* \brief Defines maximum chunksize of an i2c read action by host. +* +* This indicates the maximum size of data the I2C device driver is able to read +* at a time. Minimum value is 2. Also, the read chunk size must be even. +* +* This maximum size may be restricted by the actual DAP implementation. +* A compiler warning or error will be generated if the DAP implementation +* overrides or cannot handle the chunksize defined below. +*/ +#ifndef DRXDAP_MAX_RCHUNKSIZE +#define DRXDAP_MAX_RCHUNKSIZE 60 +#endif + +/************* +* +* This section describes drxdriver defines. +* +**************/ + +/* +* \def DRX_UNKNOWN +* \brief Generic UNKNOWN value for DRX enumerated types. +* +* Used to indicate that the parameter value is unknown or not yet initialized. +*/ +#ifndef DRX_UNKNOWN +#define DRX_UNKNOWN (254) +#endif + +/* +* \def DRX_AUTO +* \brief Generic AUTO value for DRX enumerated types. +* +* Used to instruct the driver to automatically determine the value of the +* parameter. +*/ +#ifndef DRX_AUTO +#define DRX_AUTO (255) +#endif + +/************* +* +* This section describes flag definitions for the device capbilities. +* +**************/ + +/* +* \brief LNA capability flag +* +* Device has a Low Noise Amplifier +* +*/ +#define DRX_CAPABILITY_HAS_LNA (1UL << 0) +/* +* \brief OOB-RX capability flag +* +* Device has OOB-RX +* +*/ +#define DRX_CAPABILITY_HAS_OOBRX (1UL << 1) +/* +* \brief ATV capability flag +* +* Device has ATV +* +*/ +#define DRX_CAPABILITY_HAS_ATV (1UL << 2) +/* +* \brief DVB-T capability flag +* +* Device has DVB-T +* +*/ +#define DRX_CAPABILITY_HAS_DVBT (1UL << 3) +/* +* \brief ITU-B capability flag +* +* Device has ITU-B +* +*/ +#define DRX_CAPABILITY_HAS_ITUB (1UL << 4) +/* +* \brief Audio capability flag +* +* Device has Audio +* +*/ +#define DRX_CAPABILITY_HAS_AUD (1UL << 5) +/* +* \brief SAW switch capability flag +* +* Device has SAW switch +* +*/ +#define DRX_CAPABILITY_HAS_SAWSW (1UL << 6) +/* +* \brief GPIO1 capability flag +* +* Device has GPIO1 +* +*/ +#define DRX_CAPABILITY_HAS_GPIO1 (1UL << 7) +/* +* \brief GPIO2 capability flag +* +* Device has GPIO2 +* +*/ +#define DRX_CAPABILITY_HAS_GPIO2 (1UL << 8) +/* +* \brief IRQN capability flag +* +* Device has IRQN +* +*/ +#define DRX_CAPABILITY_HAS_IRQN (1UL << 9) +/* +* \brief 8VSB capability flag +* +* Device has 8VSB +* +*/ +#define DRX_CAPABILITY_HAS_8VSB (1UL << 10) +/* +* \brief SMA-TX capability flag +* +* Device has SMATX +* +*/ +#define DRX_CAPABILITY_HAS_SMATX (1UL << 11) +/* +* \brief SMA-RX capability flag +* +* Device has SMARX +* +*/ +#define DRX_CAPABILITY_HAS_SMARX (1UL << 12) +/* +* \brief ITU-A/C capability flag +* +* Device has ITU-A/C +* +*/ +#define DRX_CAPABILITY_HAS_ITUAC (1UL << 13) + +/*------------------------------------------------------------------------- +MACROS +-------------------------------------------------------------------------*/ +/* Macros to stringify the version number */ +#define DRX_VERSIONSTRING(MAJOR, MINOR, PATCH) \ + DRX_VERSIONSTRING_HELP(MAJOR)"." \ + DRX_VERSIONSTRING_HELP(MINOR)"." \ + DRX_VERSIONSTRING_HELP(PATCH) +#define DRX_VERSIONSTRING_HELP(NUM) #NUM + +/* +* \brief Macro to create byte array elements from 16 bit integers. +* This macro is used to create byte arrays for block writes. +* Block writes speed up I2C traffic between host and demod. +* The macro takes care of the required byte order in a 16 bits word. +* x->lowbyte(x), highbyte(x) +*/ +#define DRX_16TO8(x) ((u8) (((u16)x) & 0xFF)), \ + ((u8)((((u16)x)>>8)&0xFF)) + +/* +* \brief Macro to convert 16 bit register value to a s32 +*/ +#define DRX_U16TODRXFREQ(x) ((x & 0x8000) ? \ + ((s32) \ + (((u32) x) | 0xFFFF0000)) : \ + ((s32) x)) + +/*------------------------------------------------------------------------- +ENUM +-------------------------------------------------------------------------*/ + +/* +* \enum enum drx_standard +* \brief Modulation standards. +*/ +enum drx_standard { + DRX_STANDARD_DVBT = 0, /*< Terrestrial DVB-T. */ + DRX_STANDARD_8VSB, /*< Terrestrial 8VSB. */ + DRX_STANDARD_NTSC, /*< Terrestrial\Cable analog NTSC. */ + DRX_STANDARD_PAL_SECAM_BG, + /*< Terrestrial analog PAL/SECAM B/G */ + DRX_STANDARD_PAL_SECAM_DK, + /*< Terrestrial analog PAL/SECAM D/K */ + DRX_STANDARD_PAL_SECAM_I, + /*< Terrestrial analog PAL/SECAM I */ + DRX_STANDARD_PAL_SECAM_L, + /*< Terrestrial analog PAL/SECAM L + with negative modulation */ + DRX_STANDARD_PAL_SECAM_LP, + /*< Terrestrial analog PAL/SECAM L + with positive modulation */ + DRX_STANDARD_ITU_A, /*< Cable ITU ANNEX A. */ + DRX_STANDARD_ITU_B, /*< Cable ITU ANNEX B. */ + DRX_STANDARD_ITU_C, /*< Cable ITU ANNEX C. */ + DRX_STANDARD_ITU_D, /*< Cable ITU ANNEX D. */ + DRX_STANDARD_FM, /*< Terrestrial\Cable FM radio */ + DRX_STANDARD_DTMB, /*< Terrestrial DTMB standard (China)*/ + DRX_STANDARD_UNKNOWN = DRX_UNKNOWN, + /*< Standard unknown. */ + DRX_STANDARD_AUTO = DRX_AUTO + /*< Autodetect standard. */ +}; + +/* +* \enum enum drx_standard +* \brief Modulation sub-standards. +*/ +enum drx_substandard { + DRX_SUBSTANDARD_MAIN = 0, /*< Main subvariant of standard */ + DRX_SUBSTANDARD_ATV_BG_SCANDINAVIA, + DRX_SUBSTANDARD_ATV_DK_POLAND, + DRX_SUBSTANDARD_ATV_DK_CHINA, + DRX_SUBSTANDARD_UNKNOWN = DRX_UNKNOWN, + /*< Sub-standard unknown. */ + DRX_SUBSTANDARD_AUTO = DRX_AUTO + /*< Auto (default) sub-standard */ +}; + +/* +* \enum enum drx_bandwidth +* \brief Channel bandwidth or channel spacing. +*/ +enum drx_bandwidth { + DRX_BANDWIDTH_8MHZ = 0, /*< Bandwidth 8 MHz. */ + DRX_BANDWIDTH_7MHZ, /*< Bandwidth 7 MHz. */ + DRX_BANDWIDTH_6MHZ, /*< Bandwidth 6 MHz. */ + DRX_BANDWIDTH_UNKNOWN = DRX_UNKNOWN, + /*< Bandwidth unknown. */ + DRX_BANDWIDTH_AUTO = DRX_AUTO + /*< Auto Set Bandwidth */ +}; + +/* +* \enum enum drx_mirror +* \brief Indicate if channel spectrum is mirrored or not. +*/ +enum drx_mirror { + DRX_MIRROR_NO = 0, /*< Spectrum is not mirrored. */ + DRX_MIRROR_YES, /*< Spectrum is mirrored. */ + DRX_MIRROR_UNKNOWN = DRX_UNKNOWN, + /*< Unknown if spectrum is mirrored. */ + DRX_MIRROR_AUTO = DRX_AUTO + /*< Autodetect if spectrum is mirrored. */ +}; + +/* +* \enum enum drx_modulation +* \brief Constellation type of the channel. +*/ +enum drx_modulation { + DRX_CONSTELLATION_BPSK = 0, /*< Modulation is BPSK. */ + DRX_CONSTELLATION_QPSK, /*< Constellation is QPSK. */ + DRX_CONSTELLATION_PSK8, /*< Constellation is PSK8. */ + DRX_CONSTELLATION_QAM16, /*< Constellation is QAM16. */ + DRX_CONSTELLATION_QAM32, /*< Constellation is QAM32. */ + DRX_CONSTELLATION_QAM64, /*< Constellation is QAM64. */ + DRX_CONSTELLATION_QAM128, /*< Constellation is QAM128. */ + DRX_CONSTELLATION_QAM256, /*< Constellation is QAM256. */ + DRX_CONSTELLATION_QAM512, /*< Constellation is QAM512. */ + DRX_CONSTELLATION_QAM1024, /*< Constellation is QAM1024. */ + DRX_CONSTELLATION_QPSK_NR, /*< Constellation is QPSK_NR */ + DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN, + /*< Constellation unknown. */ + DRX_CONSTELLATION_AUTO = DRX_AUTO + /*< Autodetect constellation. */ +}; + +/* +* \enum enum drx_hierarchy +* \brief Hierarchy of the channel. +*/ +enum drx_hierarchy { + DRX_HIERARCHY_NONE = 0, /*< None hierarchical channel. */ + DRX_HIERARCHY_ALPHA1, /*< Hierarchical channel, alpha=1. */ + DRX_HIERARCHY_ALPHA2, /*< Hierarchical channel, alpha=2. */ + DRX_HIERARCHY_ALPHA4, /*< Hierarchical channel, alpha=4. */ + DRX_HIERARCHY_UNKNOWN = DRX_UNKNOWN, + /*< Hierarchy unknown. */ + DRX_HIERARCHY_AUTO = DRX_AUTO + /*< Autodetect hierarchy. */ +}; + +/* +* \enum enum drx_priority +* \brief Channel priority in case of hierarchical transmission. +*/ +enum drx_priority { + DRX_PRIORITY_LOW = 0, /*< Low priority channel. */ + DRX_PRIORITY_HIGH, /*< High priority channel. */ + DRX_PRIORITY_UNKNOWN = DRX_UNKNOWN + /*< Priority unknown. */ +}; + +/* +* \enum enum drx_coderate +* \brief Channel priority in case of hierarchical transmission. +*/ +enum drx_coderate { + DRX_CODERATE_1DIV2 = 0, /*< Code rate 1/2nd. */ + DRX_CODERATE_2DIV3, /*< Code rate 2/3nd. */ + DRX_CODERATE_3DIV4, /*< Code rate 3/4nd. */ + DRX_CODERATE_5DIV6, /*< Code rate 5/6nd. */ + DRX_CODERATE_7DIV8, /*< Code rate 7/8nd. */ + DRX_CODERATE_UNKNOWN = DRX_UNKNOWN, + /*< Code rate unknown. */ + DRX_CODERATE_AUTO = DRX_AUTO + /*< Autodetect code rate. */ +}; + +/* +* \enum enum drx_guard +* \brief Guard interval of a channel. +*/ +enum drx_guard { + DRX_GUARD_1DIV32 = 0, /*< Guard interval 1/32nd. */ + DRX_GUARD_1DIV16, /*< Guard interval 1/16th. */ + DRX_GUARD_1DIV8, /*< Guard interval 1/8th. */ + DRX_GUARD_1DIV4, /*< Guard interval 1/4th. */ + DRX_GUARD_UNKNOWN = DRX_UNKNOWN, + /*< Guard interval unknown. */ + DRX_GUARD_AUTO = DRX_AUTO + /*< Autodetect guard interval. */ +}; + +/* +* \enum enum drx_fft_mode +* \brief FFT mode. +*/ +enum drx_fft_mode { + DRX_FFTMODE_2K = 0, /*< 2K FFT mode. */ + DRX_FFTMODE_4K, /*< 4K FFT mode. */ + DRX_FFTMODE_8K, /*< 8K FFT mode. */ + DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN, + /*< FFT mode unknown. */ + DRX_FFTMODE_AUTO = DRX_AUTO + /*< Autodetect FFT mode. */ +}; + +/* +* \enum enum drx_classification +* \brief Channel classification. +*/ +enum drx_classification { + DRX_CLASSIFICATION_GAUSS = 0, /*< Gaussion noise. */ + DRX_CLASSIFICATION_HVY_GAUSS, /*< Heavy Gaussion noise. */ + DRX_CLASSIFICATION_COCHANNEL, /*< Co-channel. */ + DRX_CLASSIFICATION_STATIC, /*< Static echo. */ + DRX_CLASSIFICATION_MOVING, /*< Moving echo. */ + DRX_CLASSIFICATION_ZERODB, /*< Zero dB echo. */ + DRX_CLASSIFICATION_UNKNOWN = DRX_UNKNOWN, + /*< Unknown classification */ + DRX_CLASSIFICATION_AUTO = DRX_AUTO + /*< Autodetect classification. */ +}; + +/* +* /enum enum drx_interleave_mode +* /brief Interleave modes +*/ +enum drx_interleave_mode { + DRX_INTERLEAVEMODE_I128_J1 = 0, + DRX_INTERLEAVEMODE_I128_J1_V2, + DRX_INTERLEAVEMODE_I128_J2, + DRX_INTERLEAVEMODE_I64_J2, + DRX_INTERLEAVEMODE_I128_J3, + DRX_INTERLEAVEMODE_I32_J4, + DRX_INTERLEAVEMODE_I128_J4, + DRX_INTERLEAVEMODE_I16_J8, + DRX_INTERLEAVEMODE_I128_J5, + DRX_INTERLEAVEMODE_I8_J16, + DRX_INTERLEAVEMODE_I128_J6, + DRX_INTERLEAVEMODE_RESERVED_11, + DRX_INTERLEAVEMODE_I128_J7, + DRX_INTERLEAVEMODE_RESERVED_13, + DRX_INTERLEAVEMODE_I128_J8, + DRX_INTERLEAVEMODE_RESERVED_15, + DRX_INTERLEAVEMODE_I12_J17, + DRX_INTERLEAVEMODE_I5_J4, + DRX_INTERLEAVEMODE_B52_M240, + DRX_INTERLEAVEMODE_B52_M720, + DRX_INTERLEAVEMODE_B52_M48, + DRX_INTERLEAVEMODE_B52_M0, + DRX_INTERLEAVEMODE_UNKNOWN = DRX_UNKNOWN, + /*< Unknown interleave mode */ + DRX_INTERLEAVEMODE_AUTO = DRX_AUTO + /*< Autodetect interleave mode */ +}; + +/* +* \enum enum drx_carrier_mode +* \brief Channel Carrier Mode. +*/ +enum drx_carrier_mode { + DRX_CARRIER_MULTI = 0, /*< Multi carrier mode */ + DRX_CARRIER_SINGLE, /*< Single carrier mode */ + DRX_CARRIER_UNKNOWN = DRX_UNKNOWN, + /*< Carrier mode unknown. */ + DRX_CARRIER_AUTO = DRX_AUTO /*< Autodetect carrier mode */ +}; + +/* +* \enum enum drx_frame_mode +* \brief Channel Frame Mode. +*/ +enum drx_frame_mode { + DRX_FRAMEMODE_420 = 0, /*< 420 with variable PN */ + DRX_FRAMEMODE_595, /*< 595 */ + DRX_FRAMEMODE_945, /*< 945 with variable PN */ + DRX_FRAMEMODE_420_FIXED_PN, + /*< 420 with fixed PN */ + DRX_FRAMEMODE_945_FIXED_PN, + /*< 945 with fixed PN */ + DRX_FRAMEMODE_UNKNOWN = DRX_UNKNOWN, + /*< Frame mode unknown. */ + DRX_FRAMEMODE_AUTO = DRX_AUTO + /*< Autodetect frame mode */ +}; + +/* +* \enum enum drx_tps_frame +* \brief Frame number in current super-frame. +*/ +enum drx_tps_frame { + DRX_TPS_FRAME1 = 0, /*< TPS frame 1. */ + DRX_TPS_FRAME2, /*< TPS frame 2. */ + DRX_TPS_FRAME3, /*< TPS frame 3. */ + DRX_TPS_FRAME4, /*< TPS frame 4. */ + DRX_TPS_FRAME_UNKNOWN = DRX_UNKNOWN + /*< TPS frame unknown. */ +}; + +/* +* \enum enum drx_ldpc +* \brief TPS LDPC . +*/ +enum drx_ldpc { + DRX_LDPC_0_4 = 0, /*< LDPC 0.4 */ + DRX_LDPC_0_6, /*< LDPC 0.6 */ + DRX_LDPC_0_8, /*< LDPC 0.8 */ + DRX_LDPC_UNKNOWN = DRX_UNKNOWN, + /*< LDPC unknown. */ + DRX_LDPC_AUTO = DRX_AUTO /*< Autodetect LDPC */ +}; + +/* +* \enum enum drx_pilot_mode +* \brief Pilot modes in DTMB. +*/ +enum drx_pilot_mode { + DRX_PILOT_ON = 0, /*< Pilot On */ + DRX_PILOT_OFF, /*< Pilot Off */ + DRX_PILOT_UNKNOWN = DRX_UNKNOWN, + /*< Pilot unknown. */ + DRX_PILOT_AUTO = DRX_AUTO /*< Autodetect Pilot */ +}; + +/* + * enum drxu_code_action - indicate if firmware has to be uploaded or verified. + * @UCODE_UPLOAD: Upload the microcode image to device + * @UCODE_VERIFY: Compare microcode image with code on device + */ +enum drxu_code_action { + UCODE_UPLOAD, + UCODE_VERIFY +}; + +/* +* \enum enum drx_lock_status * \brief Used to reflect current lock status of demodulator. +* +* The generic lock states have device dependent semantics. + + DRX_NEVER_LOCK = 0, + **< Device will never lock on this signal * + DRX_NOT_LOCKED, + **< Device has no lock at all * + DRX_LOCK_STATE_1, + **< Generic lock state * + DRX_LOCK_STATE_2, + **< Generic lock state * + DRX_LOCK_STATE_3, + **< Generic lock state * + DRX_LOCK_STATE_4, + **< Generic lock state * + DRX_LOCK_STATE_5, + **< Generic lock state * + DRX_LOCK_STATE_6, + **< Generic lock state * + DRX_LOCK_STATE_7, + **< Generic lock state * + DRX_LOCK_STATE_8, + **< Generic lock state * + DRX_LOCK_STATE_9, + **< Generic lock state * + DRX_LOCKED **< Device is in lock * +*/ + +enum drx_lock_status { + DRX_NEVER_LOCK = 0, + DRX_NOT_LOCKED, + DRX_LOCK_STATE_1, + DRX_LOCK_STATE_2, + DRX_LOCK_STATE_3, + DRX_LOCK_STATE_4, + DRX_LOCK_STATE_5, + DRX_LOCK_STATE_6, + DRX_LOCK_STATE_7, + DRX_LOCK_STATE_8, + DRX_LOCK_STATE_9, + DRX_LOCKED +}; + +/* +* \enum enum drx_uio* \brief Used to address a User IO (UIO). +*/ +enum drx_uio { + DRX_UIO1, + DRX_UIO2, + DRX_UIO3, + DRX_UIO4, + DRX_UIO5, + DRX_UIO6, + DRX_UIO7, + DRX_UIO8, + DRX_UIO9, + DRX_UIO10, + DRX_UIO11, + DRX_UIO12, + DRX_UIO13, + DRX_UIO14, + DRX_UIO15, + DRX_UIO16, + DRX_UIO17, + DRX_UIO18, + DRX_UIO19, + DRX_UIO20, + DRX_UIO21, + DRX_UIO22, + DRX_UIO23, + DRX_UIO24, + DRX_UIO25, + DRX_UIO26, + DRX_UIO27, + DRX_UIO28, + DRX_UIO29, + DRX_UIO30, + DRX_UIO31, + DRX_UIO32, + DRX_UIO_MAX = DRX_UIO32 +}; + +/* +* \enum enum drxuio_mode * \brief Used to configure the modus oprandi of a UIO. +* +* DRX_UIO_MODE_FIRMWARE is an old uio mode. +* It is replaced by the modes DRX_UIO_MODE_FIRMWARE0 .. DRX_UIO_MODE_FIRMWARE9. +* To be backward compatible DRX_UIO_MODE_FIRMWARE is equivalent to +* DRX_UIO_MODE_FIRMWARE0. +*/ +enum drxuio_mode { + DRX_UIO_MODE_DISABLE = 0x01, + /*< not used, pin is configured as input */ + DRX_UIO_MODE_READWRITE = 0x02, + /*< used for read/write by application */ + DRX_UIO_MODE_FIRMWARE = 0x04, + /*< controlled by firmware, function 0 */ + DRX_UIO_MODE_FIRMWARE0 = DRX_UIO_MODE_FIRMWARE, + /*< same as above */ + DRX_UIO_MODE_FIRMWARE1 = 0x08, + /*< controlled by firmware, function 1 */ + DRX_UIO_MODE_FIRMWARE2 = 0x10, + /*< controlled by firmware, function 2 */ + DRX_UIO_MODE_FIRMWARE3 = 0x20, + /*< controlled by firmware, function 3 */ + DRX_UIO_MODE_FIRMWARE4 = 0x40, + /*< controlled by firmware, function 4 */ + DRX_UIO_MODE_FIRMWARE5 = 0x80 + /*< controlled by firmware, function 5 */ +}; + +/* +* \enum enum drxoob_downstream_standard * \brief Used to select OOB standard. +* +* Based on ANSI 55-1 and 55-2 +*/ +enum drxoob_downstream_standard { + DRX_OOB_MODE_A = 0, + /*< ANSI 55-1 */ + DRX_OOB_MODE_B_GRADE_A, + /*< ANSI 55-2 A */ + DRX_OOB_MODE_B_GRADE_B + /*< ANSI 55-2 B */ +}; + +/*------------------------------------------------------------------------- +STRUCTS +-------------------------------------------------------------------------*/ + +/*============================================================================*/ +/*============================================================================*/ +/*== CTRL CFG related data structures ========================================*/ +/*============================================================================*/ +/*============================================================================*/ + +#ifndef DRX_CFG_BASE +#define DRX_CFG_BASE 0 +#endif + +#define DRX_CFG_MPEG_OUTPUT (DRX_CFG_BASE + 0) /* MPEG TS output */ +#define DRX_CFG_PKTERR (DRX_CFG_BASE + 1) /* Packet Error */ +#define DRX_CFG_SYMCLK_OFFS (DRX_CFG_BASE + 2) /* Symbol Clk Offset */ +#define DRX_CFG_SMA (DRX_CFG_BASE + 3) /* Smart Antenna */ +#define DRX_CFG_PINSAFE (DRX_CFG_BASE + 4) /* Pin safe mode */ +#define DRX_CFG_SUBSTANDARD (DRX_CFG_BASE + 5) /* substandard */ +#define DRX_CFG_AUD_VOLUME (DRX_CFG_BASE + 6) /* volume */ +#define DRX_CFG_AUD_RDS (DRX_CFG_BASE + 7) /* rds */ +#define DRX_CFG_AUD_AUTOSOUND (DRX_CFG_BASE + 8) /* ASS & ASC */ +#define DRX_CFG_AUD_ASS_THRES (DRX_CFG_BASE + 9) /* ASS Thresholds */ +#define DRX_CFG_AUD_DEVIATION (DRX_CFG_BASE + 10) /* Deviation */ +#define DRX_CFG_AUD_PRESCALE (DRX_CFG_BASE + 11) /* Prescale */ +#define DRX_CFG_AUD_MIXER (DRX_CFG_BASE + 12) /* Mixer */ +#define DRX_CFG_AUD_AVSYNC (DRX_CFG_BASE + 13) /* AVSync */ +#define DRX_CFG_AUD_CARRIER (DRX_CFG_BASE + 14) /* Audio carriers */ +#define DRX_CFG_I2S_OUTPUT (DRX_CFG_BASE + 15) /* I2S output */ +#define DRX_CFG_ATV_STANDARD (DRX_CFG_BASE + 16) /* ATV standard */ +#define DRX_CFG_SQI_SPEED (DRX_CFG_BASE + 17) /* SQI speed */ +#define DRX_CTRL_CFG_MAX (DRX_CFG_BASE + 18) /* never to be used */ + +#define DRX_CFG_PINS_SAFE_MODE DRX_CFG_PINSAFE +/*============================================================================*/ +/*============================================================================*/ +/*== CTRL related data structures ============================================*/ +/*============================================================================*/ +/*============================================================================*/ + +/* + * struct drxu_code_info Parameters for microcode upload and verfiy. + * + * @mc_file: microcode file name + * + * Used by DRX_CTRL_LOAD_UCODE and DRX_CTRL_VERIFY_UCODE + */ +struct drxu_code_info { + char *mc_file; +}; + +/* +* \struct drx_mc_version_rec_t +* \brief Microcode version record +* Version numbers are stored in BCD format, as usual: +* o major number = bits 31-20 (first three nibbles of MSW) +* o minor number = bits 19-16 (fourth nibble of MSW) +* o patch number = bits 15-0 (remaining nibbles in LSW) +* +* The device type indicates for which the device is meant. It is based on the +* JTAG ID, using everything except the bond ID and the metal fix. +* +* Special values: +* - mc_dev_type == 0 => any device allowed +* - mc_base_version == 0.0.0 => full microcode (mc_version is the version) +* - mc_base_version != 0.0.0 => patch microcode, the base microcode version +* (mc_version is the version) +*/ +#define AUX_VER_RECORD 0x8000 + +struct drx_mc_version_rec { + u16 aux_type; /* type of aux data - 0x8000 for version record */ + u32 mc_dev_type; /* device type, based on JTAG ID */ + u32 mc_version; /* version of microcode */ + u32 mc_base_version; /* in case of patch: the original microcode version */ +}; + +/*========================================*/ + +/* +* \struct drx_filter_info_t +* \brief Parameters for loading filter coefficients +* +* Used by DRX_CTRL_LOAD_FILTER +*/ +struct drx_filter_info { + u8 *data_re; + /*< pointer to coefficients for RE */ + u8 *data_im; + /*< pointer to coefficients for IM */ + u16 size_re; + /*< size of coefficients for RE */ + u16 size_im; + /*< size of coefficients for IM */ +}; + +/*========================================*/ + +/* +* \struct struct drx_channel * \brief The set of parameters describing a single channel. +* +* Used by DRX_CTRL_SET_CHANNEL and DRX_CTRL_GET_CHANNEL. +* Only certain fields need to be used for a specific standard. +* +*/ +struct drx_channel { + s32 frequency; + /*< frequency in kHz */ + enum drx_bandwidth bandwidth; + /*< bandwidth */ + enum drx_mirror mirror; /*< mirrored or not on RF */ + enum drx_modulation constellation; + /*< constellation */ + enum drx_hierarchy hierarchy; + /*< hierarchy */ + enum drx_priority priority; /*< priority */ + enum drx_coderate coderate; /*< coderate */ + enum drx_guard guard; /*< guard interval */ + enum drx_fft_mode fftmode; /*< fftmode */ + enum drx_classification classification; + /*< classification */ + u32 symbolrate; + /*< symbolrate in symbols/sec */ + enum drx_interleave_mode interleavemode; + /*< interleaveMode QAM */ + enum drx_ldpc ldpc; /*< ldpc */ + enum drx_carrier_mode carrier; /*< carrier */ + enum drx_frame_mode framemode; + /*< frame mode */ + enum drx_pilot_mode pilot; /*< pilot mode */ +}; + +/*========================================*/ + +enum drx_cfg_sqi_speed { + DRX_SQI_SPEED_FAST = 0, + DRX_SQI_SPEED_MEDIUM, + DRX_SQI_SPEED_SLOW, + DRX_SQI_SPEED_UNKNOWN = DRX_UNKNOWN +}; + +/*========================================*/ + +/* +* \struct struct drx_complex * A complex number. +* +* Used by DRX_CTRL_CONSTEL. +*/ +struct drx_complex { + s16 im; + /*< Imaginary part. */ + s16 re; + /*< Real part. */ +}; + +/*========================================*/ + +/* +* \struct struct drx_frequency_plan * Array element of a frequency plan. +* +* Used by DRX_CTRL_SCAN_INIT. +*/ +struct drx_frequency_plan { + s32 first; + /*< First centre frequency in this band */ + s32 last; + /*< Last centre frequency in this band */ + s32 step; + /*< Stepping frequency in this band */ + enum drx_bandwidth bandwidth; + /*< Bandwidth within this frequency band */ + u16 ch_number; + /*< First channel number in this band, or first + index in ch_names */ + char **ch_names; + /*< Optional list of channel names in this + band */ +}; + +/*========================================*/ + +/* +* \struct struct drx_scan_param * Parameters for channel scan. +* +* Used by DRX_CTRL_SCAN_INIT. +*/ +struct drx_scan_param { + struct drx_frequency_plan *frequency_plan; + /*< Frequency plan (array)*/ + u16 frequency_plan_size; /*< Number of bands */ + u32 num_tries; /*< Max channels tried */ + s32 skip; /*< Minimum frequency step to take + after a channel is found */ + void *ext_params; /*< Standard specific params */ +}; + +/*========================================*/ + +/* +* \brief Scan commands. +* Used by scanning algorithms. +*/ +enum drx_scan_command { + DRX_SCAN_COMMAND_INIT = 0,/*< Initialize scanning */ + DRX_SCAN_COMMAND_NEXT, /*< Next scan */ + DRX_SCAN_COMMAND_STOP /*< Stop scanning */ +}; + +/*========================================*/ + +/* +* \brief Inner scan function prototype. +*/ +typedef int(*drx_scan_func_t) (void *scan_context, + enum drx_scan_command scan_command, + struct drx_channel *scan_channel, + bool *get_next_channel); + +/*========================================*/ + +/* +* \struct struct drxtps_info * TPS information, DVB-T specific. +* +* Used by DRX_CTRL_TPS_INFO. +*/ + struct drxtps_info { + enum drx_fft_mode fftmode; /*< Fft mode */ + enum drx_guard guard; /*< Guard interval */ + enum drx_modulation constellation; + /*< Constellation */ + enum drx_hierarchy hierarchy; + /*< Hierarchy */ + enum drx_coderate high_coderate; + /*< High code rate */ + enum drx_coderate low_coderate; + /*< Low cod rate */ + enum drx_tps_frame frame; /*< Tps frame */ + u8 length; /*< Length */ + u16 cell_id; /*< Cell id */ + }; + +/*========================================*/ + +/* +* \brief Power mode of device. +* +* Used by DRX_CTRL_SET_POWER_MODE. +*/ + enum drx_power_mode { + DRX_POWER_UP = 0, + /*< Generic , Power Up Mode */ + DRX_POWER_MODE_1, + /*< Device specific , Power Up Mode */ + DRX_POWER_MODE_2, + /*< Device specific , Power Up Mode */ + DRX_POWER_MODE_3, + /*< Device specific , Power Up Mode */ + DRX_POWER_MODE_4, + /*< Device specific , Power Up Mode */ + DRX_POWER_MODE_5, + /*< Device specific , Power Up Mode */ + DRX_POWER_MODE_6, + /*< Device specific , Power Up Mode */ + DRX_POWER_MODE_7, + /*< Device specific , Power Up Mode */ + DRX_POWER_MODE_8, + /*< Device specific , Power Up Mode */ + + DRX_POWER_MODE_9, + /*< Device specific , Power Down Mode */ + DRX_POWER_MODE_10, + /*< Device specific , Power Down Mode */ + DRX_POWER_MODE_11, + /*< Device specific , Power Down Mode */ + DRX_POWER_MODE_12, + /*< Device specific , Power Down Mode */ + DRX_POWER_MODE_13, + /*< Device specific , Power Down Mode */ + DRX_POWER_MODE_14, + /*< Device specific , Power Down Mode */ + DRX_POWER_MODE_15, + /*< Device specific , Power Down Mode */ + DRX_POWER_MODE_16, + /*< Device specific , Power Down Mode */ + DRX_POWER_DOWN = 255 + /*< Generic , Power Down Mode */ + }; + +/*========================================*/ + +/* +* \enum enum drx_module * \brief Software module identification. +* +* Used by DRX_CTRL_VERSION. +*/ + enum drx_module { + DRX_MODULE_DEVICE, + DRX_MODULE_MICROCODE, + DRX_MODULE_DRIVERCORE, + DRX_MODULE_DEVICEDRIVER, + DRX_MODULE_DAP, + DRX_MODULE_BSP_I2C, + DRX_MODULE_BSP_TUNER, + DRX_MODULE_BSP_HOST, + DRX_MODULE_UNKNOWN + }; + +/* +* \enum struct drx_version * \brief Version information of one software module. +* +* Used by DRX_CTRL_VERSION. +*/ + struct drx_version { + enum drx_module module_type; + /*< Type identifier of the module */ + char *module_name; + /*< Name or description of module */ + u16 v_major; /*< Major version number */ + u16 v_minor; /*< Minor version number */ + u16 v_patch; /*< Patch version number */ + char *v_string; /*< Version as text string */ + }; + +/* +* \enum struct drx_version_list * \brief List element of NULL terminated, linked list for version information. +* +* Used by DRX_CTRL_VERSION. +*/ +struct drx_version_list { + struct drx_version *version;/*< Version information */ + struct drx_version_list *next; + /*< Next list element */ +}; + +/*========================================*/ + +/* +* \brief Parameters needed to confiugure a UIO. +* +* Used by DRX_CTRL_UIO_CFG. +*/ + struct drxuio_cfg { + enum drx_uio uio; + /*< UIO identifier */ + enum drxuio_mode mode; + /*< UIO operational mode */ + }; + +/*========================================*/ + +/* +* \brief Parameters needed to read from or write to a UIO. +* +* Used by DRX_CTRL_UIO_READ and DRX_CTRL_UIO_WRITE. +*/ + struct drxuio_data { + enum drx_uio uio; + /*< UIO identifier */ + bool value; + /*< UIO value (true=1, false=0) */ + }; + +/*========================================*/ + +/* +* \brief Parameters needed to configure OOB. +* +* Used by DRX_CTRL_SET_OOB. +*/ + struct drxoob { + s32 frequency; /*< Frequency in kHz */ + enum drxoob_downstream_standard standard; + /*< OOB standard */ + bool spectrum_inverted; /*< If true, then spectrum + is inverted */ + }; + +/*========================================*/ + +/* +* \brief Metrics from OOB. +* +* Used by DRX_CTRL_GET_OOB. +*/ + struct drxoob_status { + s32 frequency; /*< Frequency in Khz */ + enum drx_lock_status lock; /*< Lock status */ + u32 mer; /*< MER */ + s32 symbol_rate_offset; /*< Symbolrate offset in ppm */ + }; + +/*========================================*/ + +/* +* \brief Device dependent configuration data. +* +* Used by DRX_CTRL_SET_CFG and DRX_CTRL_GET_CFG. +* A sort of nested drx_ctrl() functionality for device specific controls. +*/ + struct drx_cfg { + u32 cfg_type; + /*< Function identifier */ + void *cfg_data; + /*< Function data */ + }; + +/*========================================*/ + +/* +* /struct DRXMpegStartWidth_t +* MStart width [nr MCLK cycles] for serial MPEG output. +*/ + + enum drxmpeg_str_width { + DRX_MPEG_STR_WIDTH_1, + DRX_MPEG_STR_WIDTH_8 + }; + +/* CTRL CFG MPEG output */ +/* +* \struct struct drx_cfg_mpeg_output * \brief Configuration parameters for MPEG output control. +* +* Used by DRX_CFG_MPEG_OUTPUT, in combination with DRX_CTRL_SET_CFG and +* DRX_CTRL_GET_CFG. +*/ + + struct drx_cfg_mpeg_output { + bool enable_mpeg_output;/*< If true, enable MPEG output */ + bool insert_rs_byte; /*< If true, insert RS byte */ + bool enable_parallel; /*< If true, parallel out otherwise + serial */ + bool invert_data; /*< If true, invert DATA signals */ + bool invert_err; /*< If true, invert ERR signal */ + bool invert_str; /*< If true, invert STR signals */ + bool invert_val; /*< If true, invert VAL signals */ + bool invert_clk; /*< If true, invert CLK signals */ + bool static_clk; /*< If true, static MPEG clockrate + will be used, otherwise clockrate + will adapt to the bitrate of the + TS */ + u32 bitrate; /*< Maximum bitrate in b/s in case + static clockrate is selected */ + enum drxmpeg_str_width width_str; + /*< MPEG start width */ + }; + + +/*========================================*/ + +/* +* \struct struct drxi2c_data * \brief Data for I2C via 2nd or 3rd or etc I2C port. +* +* Used by DRX_CTRL_I2C_READWRITE. +* If port_nr is equal to primairy port_nr BSPI2C will be used. +* +*/ + struct drxi2c_data { + u16 port_nr; /*< I2C port number */ + struct i2c_device_addr *w_dev_addr; + /*< Write device address */ + u16 w_count; /*< Size of write data in bytes */ + u8 *wData; /*< Pointer to write data */ + struct i2c_device_addr *r_dev_addr; + /*< Read device address */ + u16 r_count; /*< Size of data to read in bytes */ + u8 *r_data; /*< Pointer to read buffer */ + }; + +/*========================================*/ + +/* +* \enum enum drx_aud_standard * \brief Audio standard identifier. +* +* Used by DRX_CTRL_SET_AUD. +*/ + enum drx_aud_standard { + DRX_AUD_STANDARD_BTSC, /*< set BTSC standard (USA) */ + DRX_AUD_STANDARD_A2, /*< set A2-Korea FM Stereo */ + DRX_AUD_STANDARD_EIAJ, /*< set to Japanese FM Stereo */ + DRX_AUD_STANDARD_FM_STEREO,/*< set to FM-Stereo Radio */ + DRX_AUD_STANDARD_M_MONO, /*< for 4.5 MHz mono detected */ + DRX_AUD_STANDARD_D_K_MONO, /*< for 6.5 MHz mono detected */ + DRX_AUD_STANDARD_BG_FM, /*< set BG_FM standard */ + DRX_AUD_STANDARD_D_K1, /*< set D_K1 standard */ + DRX_AUD_STANDARD_D_K2, /*< set D_K2 standard */ + DRX_AUD_STANDARD_D_K3, /*< set D_K3 standard */ + DRX_AUD_STANDARD_BG_NICAM_FM, + /*< set BG_NICAM_FM standard */ + DRX_AUD_STANDARD_L_NICAM_AM, + /*< set L_NICAM_AM standard */ + DRX_AUD_STANDARD_I_NICAM_FM, + /*< set I_NICAM_FM standard */ + DRX_AUD_STANDARD_D_K_NICAM_FM, + /*< set D_K_NICAM_FM standard */ + DRX_AUD_STANDARD_NOT_READY,/*< used to detect audio standard */ + DRX_AUD_STANDARD_AUTO = DRX_AUTO, + /*< Automatic Standard Detection */ + DRX_AUD_STANDARD_UNKNOWN = DRX_UNKNOWN + /*< used as auto and for readback */ + }; + +/* CTRL_AUD_GET_STATUS - struct drx_aud_status */ +/* +* \enum enum drx_aud_nicam_status * \brief Status of NICAM carrier. +*/ + enum drx_aud_nicam_status { + DRX_AUD_NICAM_DETECTED = 0, + /*< NICAM carrier detected */ + DRX_AUD_NICAM_NOT_DETECTED, + /*< NICAM carrier not detected */ + DRX_AUD_NICAM_BAD /*< NICAM carrier bad quality */ + }; + +/* +* \struct struct drx_aud_status * \brief Audio status characteristics. +*/ + struct drx_aud_status { + bool stereo; /*< stereo detection */ + bool carrier_a; /*< carrier A detected */ + bool carrier_b; /*< carrier B detected */ + bool sap; /*< sap / bilingual detection */ + bool rds; /*< RDS data array present */ + enum drx_aud_nicam_status nicam_status; + /*< status of NICAM carrier */ + s8 fm_ident; /*< FM Identification value */ + }; + +/* CTRL_AUD_READ_RDS - DRXRDSdata_t */ + +/* +* \struct DRXRDSdata_t +* \brief Raw RDS data array. +*/ + struct drx_cfg_aud_rds { + bool valid; /*< RDS data validation */ + u16 data[18]; /*< data from one RDS data array */ + }; + +/* DRX_CFG_AUD_VOLUME - struct drx_cfg_aud_volume - set/get */ +/* +* \enum DRXAudAVCDecayTime_t +* \brief Automatic volume control configuration. +*/ + enum drx_aud_avc_mode { + DRX_AUD_AVC_OFF, /*< Automatic volume control off */ + DRX_AUD_AVC_DECAYTIME_8S, /*< level volume in 8 seconds */ + DRX_AUD_AVC_DECAYTIME_4S, /*< level volume in 4 seconds */ + DRX_AUD_AVC_DECAYTIME_2S, /*< level volume in 2 seconds */ + DRX_AUD_AVC_DECAYTIME_20MS/*< level volume in 20 millisec */ + }; + +/* +* /enum DRXAudMaxAVCGain_t +* /brief Automatic volume control max gain in audio baseband. +*/ + enum drx_aud_avc_max_gain { + DRX_AUD_AVC_MAX_GAIN_0DB, /*< maximum AVC gain 0 dB */ + DRX_AUD_AVC_MAX_GAIN_6DB, /*< maximum AVC gain 6 dB */ + DRX_AUD_AVC_MAX_GAIN_12DB /*< maximum AVC gain 12 dB */ + }; + +/* +* /enum DRXAudMaxAVCAtten_t +* /brief Automatic volume control max attenuation in audio baseband. +*/ + enum drx_aud_avc_max_atten { + DRX_AUD_AVC_MAX_ATTEN_12DB, + /*< maximum AVC attenuation 12 dB */ + DRX_AUD_AVC_MAX_ATTEN_18DB, + /*< maximum AVC attenuation 18 dB */ + DRX_AUD_AVC_MAX_ATTEN_24DB/*< maximum AVC attenuation 24 dB */ + }; +/* +* \struct struct drx_cfg_aud_volume * \brief Audio volume configuration. +*/ + struct drx_cfg_aud_volume { + bool mute; /*< mute overrides volume setting */ + s16 volume; /*< volume, range -114 to 12 dB */ + enum drx_aud_avc_mode avc_mode; /*< AVC auto volume control mode */ + u16 avc_ref_level; /*< AVC reference level */ + enum drx_aud_avc_max_gain avc_max_gain; + /*< AVC max gain selection */ + enum drx_aud_avc_max_atten avc_max_atten; + /*< AVC max attenuation selection */ + s16 strength_left; /*< quasi-peak, left speaker */ + s16 strength_right; /*< quasi-peak, right speaker */ + }; + +/* DRX_CFG_I2S_OUTPUT - struct drx_cfg_i2s_output - set/get */ +/* +* \enum enum drxi2s_mode * \brief I2S output mode. +*/ + enum drxi2s_mode { + DRX_I2S_MODE_MASTER, /*< I2S is in master mode */ + DRX_I2S_MODE_SLAVE /*< I2S is in slave mode */ + }; + +/* +* \enum enum drxi2s_word_length * \brief Width of I2S data. +*/ + enum drxi2s_word_length { + DRX_I2S_WORDLENGTH_32 = 0,/*< I2S data is 32 bit wide */ + DRX_I2S_WORDLENGTH_16 = 1 /*< I2S data is 16 bit wide */ + }; + +/* +* \enum enum drxi2s_format * \brief Data wordstrobe alignment for I2S. +*/ + enum drxi2s_format { + DRX_I2S_FORMAT_WS_WITH_DATA, + /*< I2S data and wordstrobe are aligned */ + DRX_I2S_FORMAT_WS_ADVANCED + /*< I2S data one cycle after wordstrobe */ + }; + +/* +* \enum enum drxi2s_polarity * \brief Polarity of I2S data. +*/ + enum drxi2s_polarity { + DRX_I2S_POLARITY_RIGHT,/*< wordstrobe - right high, left low */ + DRX_I2S_POLARITY_LEFT /*< wordstrobe - right low, left high */ + }; + +/* +* \struct struct drx_cfg_i2s_output * \brief I2S output configuration. +*/ + struct drx_cfg_i2s_output { + bool output_enable; /*< I2S output enable */ + u32 frequency; /*< range from 8000-48000 Hz */ + enum drxi2s_mode mode; /*< I2S mode, master or slave */ + enum drxi2s_word_length word_length; + /*< I2S wordlength, 16 or 32 bits */ + enum drxi2s_polarity polarity;/*< I2S wordstrobe polarity */ + enum drxi2s_format format; /*< I2S wordstrobe delay to data */ + }; + +/* ------------------------------expert interface-----------------------------*/ +/* +* /enum enum drx_aud_fm_deemphasis * setting for FM-Deemphasis in audio demodulator. +* +*/ + enum drx_aud_fm_deemphasis { + DRX_AUD_FM_DEEMPH_50US, + DRX_AUD_FM_DEEMPH_75US, + DRX_AUD_FM_DEEMPH_OFF + }; + +/* +* /enum DRXAudDeviation_t +* setting for deviation mode in audio demodulator. +* +*/ + enum drx_cfg_aud_deviation { + DRX_AUD_DEVIATION_NORMAL, + DRX_AUD_DEVIATION_HIGH + }; + +/* +* /enum enum drx_no_carrier_option * setting for carrier, mute/noise. +* +*/ + enum drx_no_carrier_option { + DRX_NO_CARRIER_MUTE, + DRX_NO_CARRIER_NOISE + }; + +/* +* \enum DRXAudAutoSound_t +* \brief Automatic Sound +*/ + enum drx_cfg_aud_auto_sound { + DRX_AUD_AUTO_SOUND_OFF = 0, + DRX_AUD_AUTO_SOUND_SELECT_ON_CHANGE_ON, + DRX_AUD_AUTO_SOUND_SELECT_ON_CHANGE_OFF + }; + +/* +* \enum DRXAudASSThres_t +* \brief Automatic Sound Select Thresholds +*/ + struct drx_cfg_aud_ass_thres { + u16 a2; /* A2 Threshold for ASS configuration */ + u16 btsc; /* BTSC Threshold for ASS configuration */ + u16 nicam; /* Nicam Threshold for ASS configuration */ + }; + +/* +* \struct struct drx_aud_carrier * \brief Carrier detection related parameters +*/ + struct drx_aud_carrier { + u16 thres; /* carrier detetcion threshold for primary carrier (A) */ + enum drx_no_carrier_option opt; /* Mute or noise at no carrier detection (A) */ + s32 shift; /* DC level of incoming signal (A) */ + s32 dco; /* frequency adjustment (A) */ + }; + +/* +* \struct struct drx_cfg_aud_carriers * \brief combining carrier A & B to one struct +*/ + struct drx_cfg_aud_carriers { + struct drx_aud_carrier a; + struct drx_aud_carrier b; + }; + +/* +* /enum enum drx_aud_i2s_src * Selection of audio source +*/ + enum drx_aud_i2s_src { + DRX_AUD_SRC_MONO, + DRX_AUD_SRC_STEREO_OR_AB, + DRX_AUD_SRC_STEREO_OR_A, + DRX_AUD_SRC_STEREO_OR_B}; + +/* +* \enum enum drx_aud_i2s_matrix * \brief Used for selecting I2S output. +*/ + enum drx_aud_i2s_matrix { + DRX_AUD_I2S_MATRIX_A_MONO, + /*< A sound only, stereo or mono */ + DRX_AUD_I2S_MATRIX_B_MONO, + /*< B sound only, stereo or mono */ + DRX_AUD_I2S_MATRIX_STEREO, + /*< A+B sound, transparent */ + DRX_AUD_I2S_MATRIX_MONO /*< A+B mixed to mono sum, (L+R)/2 */}; + +/* +* /enum enum drx_aud_fm_matrix * setting for FM-Matrix in audio demodulator. +* +*/ + enum drx_aud_fm_matrix { + DRX_AUD_FM_MATRIX_NO_MATRIX, + DRX_AUD_FM_MATRIX_GERMAN, + DRX_AUD_FM_MATRIX_KOREAN, + DRX_AUD_FM_MATRIX_SOUND_A, + DRX_AUD_FM_MATRIX_SOUND_B}; + +/* +* \struct DRXAudMatrices_t +* \brief Mixer settings +*/ +struct drx_cfg_aud_mixer { + enum drx_aud_i2s_src source_i2s; + enum drx_aud_i2s_matrix matrix_i2s; + enum drx_aud_fm_matrix matrix_fm; +}; + +/* +* \enum DRXI2SVidSync_t +* \brief Audio/video synchronization, interacts with I2S mode. +* AUTO_1 and AUTO_2 are for automatic video standard detection with preference +* for NTSC or Monochrome, because the frequencies are too close (59.94 & 60 Hz) +*/ + enum drx_cfg_aud_av_sync { + DRX_AUD_AVSYNC_OFF,/*< audio/video synchronization is off */ + DRX_AUD_AVSYNC_NTSC, + /*< it is an NTSC system */ + DRX_AUD_AVSYNC_MONOCHROME, + /*< it is a MONOCHROME system */ + DRX_AUD_AVSYNC_PAL_SECAM + /*< it is a PAL/SECAM system */}; + +/* +* \struct struct drx_cfg_aud_prescale * \brief Prescalers +*/ +struct drx_cfg_aud_prescale { + u16 fm_deviation; + s16 nicam_gain; +}; + +/* +* \struct struct drx_aud_beep * \brief Beep +*/ +struct drx_aud_beep { + s16 volume; /* dB */ + u16 frequency; /* Hz */ + bool mute; +}; + +/* +* \enum enum drx_aud_btsc_detect * \brief BTSC detetcion mode +*/ + enum drx_aud_btsc_detect { + DRX_BTSC_STEREO, + DRX_BTSC_MONO_AND_SAP}; + +/* +* \struct struct drx_aud_data * \brief Audio data structure +*/ +struct drx_aud_data { + /* audio storage */ + bool audio_is_active; + enum drx_aud_standard audio_standard; + struct drx_cfg_i2s_output i2sdata; + struct drx_cfg_aud_volume volume; + enum drx_cfg_aud_auto_sound auto_sound; + struct drx_cfg_aud_ass_thres ass_thresholds; + struct drx_cfg_aud_carriers carriers; + struct drx_cfg_aud_mixer mixer; + enum drx_cfg_aud_deviation deviation; + enum drx_cfg_aud_av_sync av_sync; + struct drx_cfg_aud_prescale prescale; + enum drx_aud_fm_deemphasis deemph; + enum drx_aud_btsc_detect btsc_detect; + /* rds */ + u16 rds_data_counter; + bool rds_data_present; +}; + +/* +* \enum enum drx_qam_lock_range * \brief QAM lock range mode +*/ + enum drx_qam_lock_range { + DRX_QAM_LOCKRANGE_NORMAL, + DRX_QAM_LOCKRANGE_EXTENDED}; + +/*============================================================================*/ +/*============================================================================*/ +/*== Data access structures ==================================================*/ +/*============================================================================*/ +/*============================================================================*/ + +/* Address on device */ + typedef u32 dr_xaddr_t, *pdr_xaddr_t; + +/* Protocol specific flags */ + typedef u32 dr_xflags_t, *pdr_xflags_t; + +/* Write block of data to device */ + typedef int(*drx_write_block_func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u16 datasize, /* size of data in bytes */ + u8 *data, /* data to send */ + u32 flags); + +/* Read block of data from device */ + typedef int(*drx_read_block_func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u16 datasize, /* size of data in bytes */ + u8 *data, /* receive buffer */ + u32 flags); + +/* Write 8-bits value to device */ + typedef int(*drx_write_reg8func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u8 data, /* data to send */ + u32 flags); + +/* Read 8-bits value to device */ + typedef int(*drx_read_reg8func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u8 *data, /* receive buffer */ + u32 flags); + +/* Read modify write 8-bits value to device */ + typedef int(*drx_read_modify_write_reg8func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 waddr, /* write address of register */ + u32 raddr, /* read address of register */ + u8 wdata, /* data to write */ + u8 *rdata); /* data to read */ + +/* Write 16-bits value to device */ + typedef int(*drx_write_reg16func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u16 data, /* data to send */ + u32 flags); + +/* Read 16-bits value to device */ + typedef int(*drx_read_reg16func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u16 *data, /* receive buffer */ + u32 flags); + +/* Read modify write 16-bits value to device */ + typedef int(*drx_read_modify_write_reg16func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 waddr, /* write address of register */ + u32 raddr, /* read address of register */ + u16 wdata, /* data to write */ + u16 *rdata); /* data to read */ + +/* Write 32-bits value to device */ + typedef int(*drx_write_reg32func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u32 data, /* data to send */ + u32 flags); + +/* Read 32-bits value to device */ + typedef int(*drx_read_reg32func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 addr, /* address of register/memory */ + u32 *data, /* receive buffer */ + u32 flags); + +/* Read modify write 32-bits value to device */ + typedef int(*drx_read_modify_write_reg32func_t) (struct i2c_device_addr *dev_addr, /* address of I2C device */ + u32 waddr, /* write address of register */ + u32 raddr, /* read address of register */ + u32 wdata, /* data to write */ + u32 *rdata); /* data to read */ + +/* +* \struct struct drx_access_func * \brief Interface to an access protocol. +*/ +struct drx_access_func { + drx_write_block_func_t write_block_func; + drx_read_block_func_t read_block_func; + drx_write_reg8func_t write_reg8func; + drx_read_reg8func_t read_reg8func; + drx_read_modify_write_reg8func_t read_modify_write_reg8func; + drx_write_reg16func_t write_reg16func; + drx_read_reg16func_t read_reg16func; + drx_read_modify_write_reg16func_t read_modify_write_reg16func; + drx_write_reg32func_t write_reg32func; + drx_read_reg32func_t read_reg32func; + drx_read_modify_write_reg32func_t read_modify_write_reg32func; +}; + +/* Register address and data for register dump function */ +struct drx_reg_dump { + u32 address; + u32 data; +}; + +/*============================================================================*/ +/*============================================================================*/ +/*== Demod instance data structures ==========================================*/ +/*============================================================================*/ +/*============================================================================*/ + +/* +* \struct struct drx_common_attr * \brief Set of common attributes, shared by all DRX devices. +*/ + struct drx_common_attr { + /* Microcode (firmware) attributes */ + char *microcode_file; /*< microcode filename */ + bool verify_microcode; + /*< Use microcode verify or not. */ + struct drx_mc_version_rec mcversion; + /*< Version record of microcode from file */ + + /* Clocks and tuner attributes */ + s32 intermediate_freq; + /*< IF,if tuner instance not used. (kHz)*/ + s32 sys_clock_freq; + /*< Systemclock frequency. (kHz) */ + s32 osc_clock_freq; + /*< Oscillator clock frequency. (kHz) */ + s16 osc_clock_deviation; + /*< Oscillator clock deviation. (ppm) */ + bool mirror_freq_spect; + /*< Mirror IF frequency spectrum or not.*/ + + /* Initial MPEG output attributes */ + struct drx_cfg_mpeg_output mpeg_cfg; + /*< MPEG configuration */ + + bool is_opened; /*< if true instance is already opened. */ + + /* Channel scan */ + struct drx_scan_param *scan_param; + /*< scan parameters */ + u16 scan_freq_plan_index; + /*< next index in freq plan */ + s32 scan_next_frequency; + /*< next freq to scan */ + bool scan_ready; /*< scan ready flag */ + u32 scan_max_channels;/*< number of channels in freqplan */ + u32 scan_channels_scanned; + /*< number of channels scanned */ + /* Channel scan - inner loop: demod related */ + drx_scan_func_t scan_function; + /*< function to check channel */ + /* Channel scan - inner loop: SYSObj related */ + void *scan_context; /*< Context Pointer of SYSObj */ + /* Channel scan - parameters for default DTV scan function in core driver */ + u16 scan_demod_lock_timeout; + /*< millisecs to wait for lock */ + enum drx_lock_status scan_desired_lock; + /*< lock requirement for channel found */ + /* scan_active can be used by SetChannel to decide how to program the tuner, + fast or slow (but stable). Usually fast during scan. */ + bool scan_active; /*< true when scan routines are active */ + + /* Power management */ + enum drx_power_mode current_power_mode; + /*< current power management mode */ + + /* Tuner */ + u8 tuner_port_nr; /*< nr of I2C port to which tuner is */ + s32 tuner_min_freq_rf; + /*< minimum RF input frequency, in kHz */ + s32 tuner_max_freq_rf; + /*< maximum RF input frequency, in kHz */ + bool tuner_rf_agc_pol; /*< if true invert RF AGC polarity */ + bool tuner_if_agc_pol; /*< if true invert IF AGC polarity */ + bool tuner_slow_mode; /*< if true invert IF AGC polarity */ + + struct drx_channel current_channel; + /*< current channel parameters */ + enum drx_standard current_standard; + /*< current standard selection */ + enum drx_standard prev_standard; + /*< previous standard selection */ + enum drx_standard di_cache_standard; + /*< standard in DI cache if available */ + bool use_bootloader; /*< use bootloader in open */ + u32 capabilities; /*< capabilities flags */ + u32 product_id; /*< product ID inc. metal fix number */}; + +/* +* Generic functions for DRX devices. +*/ + +struct drx_demod_instance; + +/* +* \struct struct drx_demod_instance * \brief Top structure of demodulator instance. +*/ +struct drx_demod_instance { + /*< data access protocol functions */ + struct i2c_device_addr *my_i2c_dev_addr; + /*< i2c address and device identifier */ + struct drx_common_attr *my_common_attr; + /*< common DRX attributes */ + void *my_ext_attr; /*< device specific attributes */ + /* generic demodulator data */ + + struct i2c_adapter *i2c; + const struct firmware *firmware; +}; + +/*------------------------------------------------------------------------- +MACROS +Conversion from enum values to human readable form. +-------------------------------------------------------------------------*/ + +/* standard */ + +#define DRX_STR_STANDARD(x) ( \ + (x == DRX_STANDARD_DVBT) ? "DVB-T" : \ + (x == DRX_STANDARD_8VSB) ? "8VSB" : \ + (x == DRX_STANDARD_NTSC) ? "NTSC" : \ + (x == DRX_STANDARD_PAL_SECAM_BG) ? "PAL/SECAM B/G" : \ + (x == DRX_STANDARD_PAL_SECAM_DK) ? "PAL/SECAM D/K" : \ + (x == DRX_STANDARD_PAL_SECAM_I) ? "PAL/SECAM I" : \ + (x == DRX_STANDARD_PAL_SECAM_L) ? "PAL/SECAM L" : \ + (x == DRX_STANDARD_PAL_SECAM_LP) ? "PAL/SECAM LP" : \ + (x == DRX_STANDARD_ITU_A) ? "ITU-A" : \ + (x == DRX_STANDARD_ITU_B) ? "ITU-B" : \ + (x == DRX_STANDARD_ITU_C) ? "ITU-C" : \ + (x == DRX_STANDARD_ITU_D) ? "ITU-D" : \ + (x == DRX_STANDARD_FM) ? "FM" : \ + (x == DRX_STANDARD_DTMB) ? "DTMB" : \ + (x == DRX_STANDARD_AUTO) ? "Auto" : \ + (x == DRX_STANDARD_UNKNOWN) ? "Unknown" : \ + "(Invalid)") + +/* channel */ + +#define DRX_STR_BANDWIDTH(x) ( \ + (x == DRX_BANDWIDTH_8MHZ) ? "8 MHz" : \ + (x == DRX_BANDWIDTH_7MHZ) ? "7 MHz" : \ + (x == DRX_BANDWIDTH_6MHZ) ? "6 MHz" : \ + (x == DRX_BANDWIDTH_AUTO) ? "Auto" : \ + (x == DRX_BANDWIDTH_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_FFTMODE(x) ( \ + (x == DRX_FFTMODE_2K) ? "2k" : \ + (x == DRX_FFTMODE_4K) ? "4k" : \ + (x == DRX_FFTMODE_8K) ? "8k" : \ + (x == DRX_FFTMODE_AUTO) ? "Auto" : \ + (x == DRX_FFTMODE_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_GUARD(x) ( \ + (x == DRX_GUARD_1DIV32) ? "1/32nd" : \ + (x == DRX_GUARD_1DIV16) ? "1/16th" : \ + (x == DRX_GUARD_1DIV8) ? "1/8th" : \ + (x == DRX_GUARD_1DIV4) ? "1/4th" : \ + (x == DRX_GUARD_AUTO) ? "Auto" : \ + (x == DRX_GUARD_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_CONSTELLATION(x) ( \ + (x == DRX_CONSTELLATION_BPSK) ? "BPSK" : \ + (x == DRX_CONSTELLATION_QPSK) ? "QPSK" : \ + (x == DRX_CONSTELLATION_PSK8) ? "PSK8" : \ + (x == DRX_CONSTELLATION_QAM16) ? "QAM16" : \ + (x == DRX_CONSTELLATION_QAM32) ? "QAM32" : \ + (x == DRX_CONSTELLATION_QAM64) ? "QAM64" : \ + (x == DRX_CONSTELLATION_QAM128) ? "QAM128" : \ + (x == DRX_CONSTELLATION_QAM256) ? "QAM256" : \ + (x == DRX_CONSTELLATION_QAM512) ? "QAM512" : \ + (x == DRX_CONSTELLATION_QAM1024) ? "QAM1024" : \ + (x == DRX_CONSTELLATION_QPSK_NR) ? "QPSK_NR" : \ + (x == DRX_CONSTELLATION_AUTO) ? "Auto" : \ + (x == DRX_CONSTELLATION_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_CODERATE(x) ( \ + (x == DRX_CODERATE_1DIV2) ? "1/2nd" : \ + (x == DRX_CODERATE_2DIV3) ? "2/3rd" : \ + (x == DRX_CODERATE_3DIV4) ? "3/4th" : \ + (x == DRX_CODERATE_5DIV6) ? "5/6th" : \ + (x == DRX_CODERATE_7DIV8) ? "7/8th" : \ + (x == DRX_CODERATE_AUTO) ? "Auto" : \ + (x == DRX_CODERATE_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_HIERARCHY(x) ( \ + (x == DRX_HIERARCHY_NONE) ? "None" : \ + (x == DRX_HIERARCHY_ALPHA1) ? "Alpha=1" : \ + (x == DRX_HIERARCHY_ALPHA2) ? "Alpha=2" : \ + (x == DRX_HIERARCHY_ALPHA4) ? "Alpha=4" : \ + (x == DRX_HIERARCHY_AUTO) ? "Auto" : \ + (x == DRX_HIERARCHY_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_PRIORITY(x) ( \ + (x == DRX_PRIORITY_LOW) ? "Low" : \ + (x == DRX_PRIORITY_HIGH) ? "High" : \ + (x == DRX_PRIORITY_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_MIRROR(x) ( \ + (x == DRX_MIRROR_NO) ? "Normal" : \ + (x == DRX_MIRROR_YES) ? "Mirrored" : \ + (x == DRX_MIRROR_AUTO) ? "Auto" : \ + (x == DRX_MIRROR_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_CLASSIFICATION(x) ( \ + (x == DRX_CLASSIFICATION_GAUSS) ? "Gaussion" : \ + (x == DRX_CLASSIFICATION_HVY_GAUSS) ? "Heavy Gaussion" : \ + (x == DRX_CLASSIFICATION_COCHANNEL) ? "Co-channel" : \ + (x == DRX_CLASSIFICATION_STATIC) ? "Static echo" : \ + (x == DRX_CLASSIFICATION_MOVING) ? "Moving echo" : \ + (x == DRX_CLASSIFICATION_ZERODB) ? "Zero dB echo" : \ + (x == DRX_CLASSIFICATION_UNKNOWN) ? "Unknown" : \ + (x == DRX_CLASSIFICATION_AUTO) ? "Auto" : \ + "(Invalid)") + +#define DRX_STR_INTERLEAVEMODE(x) ( \ + (x == DRX_INTERLEAVEMODE_I128_J1) ? "I128_J1" : \ + (x == DRX_INTERLEAVEMODE_I128_J1_V2) ? "I128_J1_V2" : \ + (x == DRX_INTERLEAVEMODE_I128_J2) ? "I128_J2" : \ + (x == DRX_INTERLEAVEMODE_I64_J2) ? "I64_J2" : \ + (x == DRX_INTERLEAVEMODE_I128_J3) ? "I128_J3" : \ + (x == DRX_INTERLEAVEMODE_I32_J4) ? "I32_J4" : \ + (x == DRX_INTERLEAVEMODE_I128_J4) ? "I128_J4" : \ + (x == DRX_INTERLEAVEMODE_I16_J8) ? "I16_J8" : \ + (x == DRX_INTERLEAVEMODE_I128_J5) ? "I128_J5" : \ + (x == DRX_INTERLEAVEMODE_I8_J16) ? "I8_J16" : \ + (x == DRX_INTERLEAVEMODE_I128_J6) ? "I128_J6" : \ + (x == DRX_INTERLEAVEMODE_RESERVED_11) ? "Reserved 11" : \ + (x == DRX_INTERLEAVEMODE_I128_J7) ? "I128_J7" : \ + (x == DRX_INTERLEAVEMODE_RESERVED_13) ? "Reserved 13" : \ + (x == DRX_INTERLEAVEMODE_I128_J8) ? "I128_J8" : \ + (x == DRX_INTERLEAVEMODE_RESERVED_15) ? "Reserved 15" : \ + (x == DRX_INTERLEAVEMODE_I12_J17) ? "I12_J17" : \ + (x == DRX_INTERLEAVEMODE_I5_J4) ? "I5_J4" : \ + (x == DRX_INTERLEAVEMODE_B52_M240) ? "B52_M240" : \ + (x == DRX_INTERLEAVEMODE_B52_M720) ? "B52_M720" : \ + (x == DRX_INTERLEAVEMODE_B52_M48) ? "B52_M48" : \ + (x == DRX_INTERLEAVEMODE_B52_M0) ? "B52_M0" : \ + (x == DRX_INTERLEAVEMODE_UNKNOWN) ? "Unknown" : \ + (x == DRX_INTERLEAVEMODE_AUTO) ? "Auto" : \ + "(Invalid)") + +#define DRX_STR_LDPC(x) ( \ + (x == DRX_LDPC_0_4) ? "0.4" : \ + (x == DRX_LDPC_0_6) ? "0.6" : \ + (x == DRX_LDPC_0_8) ? "0.8" : \ + (x == DRX_LDPC_AUTO) ? "Auto" : \ + (x == DRX_LDPC_UNKNOWN) ? "Unknown" : \ + "(Invalid)") + +#define DRX_STR_CARRIER(x) ( \ + (x == DRX_CARRIER_MULTI) ? "Multi" : \ + (x == DRX_CARRIER_SINGLE) ? "Single" : \ + (x == DRX_CARRIER_AUTO) ? "Auto" : \ + (x == DRX_CARRIER_UNKNOWN) ? "Unknown" : \ + "(Invalid)") + +#define DRX_STR_FRAMEMODE(x) ( \ + (x == DRX_FRAMEMODE_420) ? "420" : \ + (x == DRX_FRAMEMODE_595) ? "595" : \ + (x == DRX_FRAMEMODE_945) ? "945" : \ + (x == DRX_FRAMEMODE_420_FIXED_PN) ? "420 with fixed PN" : \ + (x == DRX_FRAMEMODE_945_FIXED_PN) ? "945 with fixed PN" : \ + (x == DRX_FRAMEMODE_AUTO) ? "Auto" : \ + (x == DRX_FRAMEMODE_UNKNOWN) ? "Unknown" : \ + "(Invalid)") + +#define DRX_STR_PILOT(x) ( \ + (x == DRX_PILOT_ON) ? "On" : \ + (x == DRX_PILOT_OFF) ? "Off" : \ + (x == DRX_PILOT_AUTO) ? "Auto" : \ + (x == DRX_PILOT_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +/* TPS */ + +#define DRX_STR_TPS_FRAME(x) ( \ + (x == DRX_TPS_FRAME1) ? "Frame1" : \ + (x == DRX_TPS_FRAME2) ? "Frame2" : \ + (x == DRX_TPS_FRAME3) ? "Frame3" : \ + (x == DRX_TPS_FRAME4) ? "Frame4" : \ + (x == DRX_TPS_FRAME_UNKNOWN) ? "Unknown" : \ + "(Invalid)") + +/* lock status */ + +#define DRX_STR_LOCKSTATUS(x) ( \ + (x == DRX_NEVER_LOCK) ? "Never" : \ + (x == DRX_NOT_LOCKED) ? "No" : \ + (x == DRX_LOCKED) ? "Locked" : \ + (x == DRX_LOCK_STATE_1) ? "Lock state 1" : \ + (x == DRX_LOCK_STATE_2) ? "Lock state 2" : \ + (x == DRX_LOCK_STATE_3) ? "Lock state 3" : \ + (x == DRX_LOCK_STATE_4) ? "Lock state 4" : \ + (x == DRX_LOCK_STATE_5) ? "Lock state 5" : \ + (x == DRX_LOCK_STATE_6) ? "Lock state 6" : \ + (x == DRX_LOCK_STATE_7) ? "Lock state 7" : \ + (x == DRX_LOCK_STATE_8) ? "Lock state 8" : \ + (x == DRX_LOCK_STATE_9) ? "Lock state 9" : \ + "(Invalid)") + +/* version information , modules */ +#define DRX_STR_MODULE(x) ( \ + (x == DRX_MODULE_DEVICE) ? "Device" : \ + (x == DRX_MODULE_MICROCODE) ? "Microcode" : \ + (x == DRX_MODULE_DRIVERCORE) ? "CoreDriver" : \ + (x == DRX_MODULE_DEVICEDRIVER) ? "DeviceDriver" : \ + (x == DRX_MODULE_BSP_I2C) ? "BSP I2C" : \ + (x == DRX_MODULE_BSP_TUNER) ? "BSP Tuner" : \ + (x == DRX_MODULE_BSP_HOST) ? "BSP Host" : \ + (x == DRX_MODULE_DAP) ? "Data Access Protocol" : \ + (x == DRX_MODULE_UNKNOWN) ? "Unknown" : \ + "(Invalid)") + +#define DRX_STR_POWER_MODE(x) ( \ + (x == DRX_POWER_UP) ? "DRX_POWER_UP " : \ + (x == DRX_POWER_MODE_1) ? "DRX_POWER_MODE_1" : \ + (x == DRX_POWER_MODE_2) ? "DRX_POWER_MODE_2" : \ + (x == DRX_POWER_MODE_3) ? "DRX_POWER_MODE_3" : \ + (x == DRX_POWER_MODE_4) ? "DRX_POWER_MODE_4" : \ + (x == DRX_POWER_MODE_5) ? "DRX_POWER_MODE_5" : \ + (x == DRX_POWER_MODE_6) ? "DRX_POWER_MODE_6" : \ + (x == DRX_POWER_MODE_7) ? "DRX_POWER_MODE_7" : \ + (x == DRX_POWER_MODE_8) ? "DRX_POWER_MODE_8" : \ + (x == DRX_POWER_MODE_9) ? "DRX_POWER_MODE_9" : \ + (x == DRX_POWER_MODE_10) ? "DRX_POWER_MODE_10" : \ + (x == DRX_POWER_MODE_11) ? "DRX_POWER_MODE_11" : \ + (x == DRX_POWER_MODE_12) ? "DRX_POWER_MODE_12" : \ + (x == DRX_POWER_MODE_13) ? "DRX_POWER_MODE_13" : \ + (x == DRX_POWER_MODE_14) ? "DRX_POWER_MODE_14" : \ + (x == DRX_POWER_MODE_15) ? "DRX_POWER_MODE_15" : \ + (x == DRX_POWER_MODE_16) ? "DRX_POWER_MODE_16" : \ + (x == DRX_POWER_DOWN) ? "DRX_POWER_DOWN " : \ + "(Invalid)") + +#define DRX_STR_OOB_STANDARD(x) ( \ + (x == DRX_OOB_MODE_A) ? "ANSI 55-1 " : \ + (x == DRX_OOB_MODE_B_GRADE_A) ? "ANSI 55-2 A" : \ + (x == DRX_OOB_MODE_B_GRADE_B) ? "ANSI 55-2 B" : \ + "(Invalid)") + +#define DRX_STR_AUD_STANDARD(x) ( \ + (x == DRX_AUD_STANDARD_BTSC) ? "BTSC" : \ + (x == DRX_AUD_STANDARD_A2) ? "A2" : \ + (x == DRX_AUD_STANDARD_EIAJ) ? "EIAJ" : \ + (x == DRX_AUD_STANDARD_FM_STEREO) ? "FM Stereo" : \ + (x == DRX_AUD_STANDARD_AUTO) ? "Auto" : \ + (x == DRX_AUD_STANDARD_M_MONO) ? "M-Standard Mono" : \ + (x == DRX_AUD_STANDARD_D_K_MONO) ? "D/K Mono FM" : \ + (x == DRX_AUD_STANDARD_BG_FM) ? "B/G-Dual Carrier FM (A2)" : \ + (x == DRX_AUD_STANDARD_D_K1) ? "D/K1-Dual Carrier FM" : \ + (x == DRX_AUD_STANDARD_D_K2) ? "D/K2-Dual Carrier FM" : \ + (x == DRX_AUD_STANDARD_D_K3) ? "D/K3-Dual Carrier FM" : \ + (x == DRX_AUD_STANDARD_BG_NICAM_FM) ? "B/G-NICAM-FM" : \ + (x == DRX_AUD_STANDARD_L_NICAM_AM) ? "L-NICAM-AM" : \ + (x == DRX_AUD_STANDARD_I_NICAM_FM) ? "I-NICAM-FM" : \ + (x == DRX_AUD_STANDARD_D_K_NICAM_FM) ? "D/K-NICAM-FM" : \ + (x == DRX_AUD_STANDARD_UNKNOWN) ? "Unknown" : \ + "(Invalid)") +#define DRX_STR_AUD_STEREO(x) ( \ + (x == true) ? "Stereo" : \ + (x == false) ? "Mono" : \ + "(Invalid)") + +#define DRX_STR_AUD_SAP(x) ( \ + (x == true) ? "Present" : \ + (x == false) ? "Not present" : \ + "(Invalid)") + +#define DRX_STR_AUD_CARRIER(x) ( \ + (x == true) ? "Present" : \ + (x == false) ? "Not present" : \ + "(Invalid)") + +#define DRX_STR_AUD_RDS(x) ( \ + (x == true) ? "Available" : \ + (x == false) ? "Not Available" : \ + "(Invalid)") + +#define DRX_STR_AUD_NICAM_STATUS(x) ( \ + (x == DRX_AUD_NICAM_DETECTED) ? "Detected" : \ + (x == DRX_AUD_NICAM_NOT_DETECTED) ? "Not detected" : \ + (x == DRX_AUD_NICAM_BAD) ? "Bad" : \ + "(Invalid)") + +#define DRX_STR_RDS_VALID(x) ( \ + (x == true) ? "Valid" : \ + (x == false) ? "Not Valid" : \ + "(Invalid)") + +/*------------------------------------------------------------------------- +Access macros +-------------------------------------------------------------------------*/ + +/* +* \brief Create a compilable reference to the microcode attribute +* \param d pointer to demod instance +* +* Used as main reference to an attribute field. +* Used by both macro implementation and function implementation. +* These macros are defined to avoid duplication of code in macro and function +* definitions that handle access of demod common or extended attributes. +* +*/ + +#define DRX_ATTR_MCRECORD(d) ((d)->my_common_attr->mcversion) +#define DRX_ATTR_MIRRORFREQSPECT(d) ((d)->my_common_attr->mirror_freq_spect) +#define DRX_ATTR_CURRENTPOWERMODE(d)((d)->my_common_attr->current_power_mode) +#define DRX_ATTR_ISOPENED(d) ((d)->my_common_attr->is_opened) +#define DRX_ATTR_USEBOOTLOADER(d) ((d)->my_common_attr->use_bootloader) +#define DRX_ATTR_CURRENTSTANDARD(d) ((d)->my_common_attr->current_standard) +#define DRX_ATTR_PREVSTANDARD(d) ((d)->my_common_attr->prev_standard) +#define DRX_ATTR_CACHESTANDARD(d) ((d)->my_common_attr->di_cache_standard) +#define DRX_ATTR_CURRENTCHANNEL(d) ((d)->my_common_attr->current_channel) +#define DRX_ATTR_MICROCODE(d) ((d)->my_common_attr->microcode) +#define DRX_ATTR_VERIFYMICROCODE(d) ((d)->my_common_attr->verify_microcode) +#define DRX_ATTR_CAPABILITIES(d) ((d)->my_common_attr->capabilities) +#define DRX_ATTR_PRODUCTID(d) ((d)->my_common_attr->product_id) +#define DRX_ATTR_INTERMEDIATEFREQ(d) ((d)->my_common_attr->intermediate_freq) +#define DRX_ATTR_SYSCLOCKFREQ(d) ((d)->my_common_attr->sys_clock_freq) +#define DRX_ATTR_TUNERRFAGCPOL(d) ((d)->my_common_attr->tuner_rf_agc_pol) +#define DRX_ATTR_TUNERIFAGCPOL(d) ((d)->my_common_attr->tuner_if_agc_pol) +#define DRX_ATTR_TUNERSLOWMODE(d) ((d)->my_common_attr->tuner_slow_mode) +#define DRX_ATTR_TUNERSPORTNR(d) ((d)->my_common_attr->tuner_port_nr) +#define DRX_ATTR_I2CADDR(d) ((d)->my_i2c_dev_addr->i2c_addr) +#define DRX_ATTR_I2CDEVID(d) ((d)->my_i2c_dev_addr->i2c_dev_id) +#define DRX_ISMCVERTYPE(x) ((x) == AUX_VER_RECORD) + +/*************************/ + +/* Macros with device-specific handling are converted to CFG functions */ + +#define DRX_ACCESSMACRO_SET(demod, value, cfg_name, data_type) \ + do { \ + struct drx_cfg config; \ + data_type cfg_data; \ + config.cfg_type = cfg_name; \ + config.cfg_data = &cfg_data; \ + cfg_data = value; \ + drx_ctrl(demod, DRX_CTRL_SET_CFG, &config); \ + } while (0) + +#define DRX_ACCESSMACRO_GET(demod, value, cfg_name, data_type, error_value) \ + do { \ + int cfg_status; \ + struct drx_cfg config; \ + data_type cfg_data; \ + config.cfg_type = cfg_name; \ + config.cfg_data = &cfg_data; \ + cfg_status = drx_ctrl(demod, DRX_CTRL_GET_CFG, &config); \ + if (cfg_status == 0) { \ + value = cfg_data; \ + } else { \ + value = (data_type)error_value; \ + } \ + } while (0) + +/* Configuration functions for usage by Access (XS) Macros */ + +#ifndef DRX_XS_CFG_BASE +#define DRX_XS_CFG_BASE (500) +#endif + +#define DRX_XS_CFG_PRESET (DRX_XS_CFG_BASE + 0) +#define DRX_XS_CFG_AUD_BTSC_DETECT (DRX_XS_CFG_BASE + 1) +#define DRX_XS_CFG_QAM_LOCKRANGE (DRX_XS_CFG_BASE + 2) + +/* Access Macros with device-specific handling */ + +#define DRX_SET_PRESET(d, x) \ + DRX_ACCESSMACRO_SET((d), (x), DRX_XS_CFG_PRESET, char*) +#define DRX_GET_PRESET(d, x) \ + DRX_ACCESSMACRO_GET((d), (x), DRX_XS_CFG_PRESET, char*, "ERROR") + +#define DRX_SET_AUD_BTSC_DETECT(d, x) DRX_ACCESSMACRO_SET((d), (x), \ + DRX_XS_CFG_AUD_BTSC_DETECT, enum drx_aud_btsc_detect) +#define DRX_GET_AUD_BTSC_DETECT(d, x) DRX_ACCESSMACRO_GET((d), (x), \ + DRX_XS_CFG_AUD_BTSC_DETECT, enum drx_aud_btsc_detect, DRX_UNKNOWN) + +#define DRX_SET_QAM_LOCKRANGE(d, x) DRX_ACCESSMACRO_SET((d), (x), \ + DRX_XS_CFG_QAM_LOCKRANGE, enum drx_qam_lock_range) +#define DRX_GET_QAM_LOCKRANGE(d, x) DRX_ACCESSMACRO_GET((d), (x), \ + DRX_XS_CFG_QAM_LOCKRANGE, enum drx_qam_lock_range, DRX_UNKNOWN) + +/* +* \brief Macro to check if std is an ATV standard +* \retval true std is an ATV standard +* \retval false std is an ATV standard +*/ +#define DRX_ISATVSTD(std) (((std) == DRX_STANDARD_PAL_SECAM_BG) || \ + ((std) == DRX_STANDARD_PAL_SECAM_DK) || \ + ((std) == DRX_STANDARD_PAL_SECAM_I) || \ + ((std) == DRX_STANDARD_PAL_SECAM_L) || \ + ((std) == DRX_STANDARD_PAL_SECAM_LP) || \ + ((std) == DRX_STANDARD_NTSC) || \ + ((std) == DRX_STANDARD_FM)) + +/* +* \brief Macro to check if std is an QAM standard +* \retval true std is an QAM standards +* \retval false std is an QAM standards +*/ +#define DRX_ISQAMSTD(std) (((std) == DRX_STANDARD_ITU_A) || \ + ((std) == DRX_STANDARD_ITU_B) || \ + ((std) == DRX_STANDARD_ITU_C) || \ + ((std) == DRX_STANDARD_ITU_D)) + +/* +* \brief Macro to check if std is VSB standard +* \retval true std is VSB standard +* \retval false std is not VSB standard +*/ +#define DRX_ISVSBSTD(std) ((std) == DRX_STANDARD_8VSB) + +/* +* \brief Macro to check if std is DVBT standard +* \retval true std is DVBT standard +* \retval false std is not DVBT standard +*/ +#define DRX_ISDVBTSTD(std) ((std) == DRX_STANDARD_DVBT) + +/*------------------------------------------------------------------------- +THE END +-------------------------------------------------------------------------*/ +#endif /* __DRXDRIVER_H__ */ |