diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/media/dvb-frontends/mt352_priv.h | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/mt352_priv.h b/drivers/media/dvb-frontends/mt352_priv.h new file mode 100644 index 000000000..3ec4552ef --- /dev/null +++ b/drivers/media/dvb-frontends/mt352_priv.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Driver for Zarlink DVB-T MT352 demodulator + * + * Written by Holger Waechtler <holger@qanu.de> + * and Daniel Mack <daniel@qanu.de> + * + * AVerMedia AVerTV DVB-T 771 support by + * Wolfram Joost <dbox2@frokaschwei.de> + * + * Support for Samsung TDTC9251DH01C(M) tuner + * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it> + * Amauri Celani <acelani@essegi.net> + * + * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by + * Christopher Pascoe <c.pascoe@itee.uq.edu.au> + */ + +#ifndef _MT352_PRIV_ +#define _MT352_PRIV_ + +#define ID_MT352 0x13 + +#define msb(x) (((x) >> 8) & 0xff) +#define lsb(x) ((x) & 0xff) + +enum mt352_reg_addr { + STATUS_0 = 0x00, + STATUS_1 = 0x01, + STATUS_2 = 0x02, + STATUS_3 = 0x03, + STATUS_4 = 0x04, + INTERRUPT_0 = 0x05, + INTERRUPT_1 = 0x06, + INTERRUPT_2 = 0x07, + INTERRUPT_3 = 0x08, + SNR = 0x09, + VIT_ERR_CNT_2 = 0x0A, + VIT_ERR_CNT_1 = 0x0B, + VIT_ERR_CNT_0 = 0x0C, + RS_ERR_CNT_2 = 0x0D, + RS_ERR_CNT_1 = 0x0E, + RS_ERR_CNT_0 = 0x0F, + RS_UBC_1 = 0x10, + RS_UBC_0 = 0x11, + AGC_GAIN_3 = 0x12, + AGC_GAIN_2 = 0x13, + AGC_GAIN_1 = 0x14, + AGC_GAIN_0 = 0x15, + FREQ_OFFSET_2 = 0x17, + FREQ_OFFSET_1 = 0x18, + FREQ_OFFSET_0 = 0x19, + TIMING_OFFSET_1 = 0x1A, + TIMING_OFFSET_0 = 0x1B, + CHAN_FREQ_1 = 0x1C, + CHAN_FREQ_0 = 0x1D, + TPS_RECEIVED_1 = 0x1E, + TPS_RECEIVED_0 = 0x1F, + TPS_CURRENT_1 = 0x20, + TPS_CURRENT_0 = 0x21, + TPS_CELL_ID_1 = 0x22, + TPS_CELL_ID_0 = 0x23, + TPS_MISC_DATA_2 = 0x24, + TPS_MISC_DATA_1 = 0x25, + TPS_MISC_DATA_0 = 0x26, + RESET = 0x50, + TPS_GIVEN_1 = 0x51, + TPS_GIVEN_0 = 0x52, + ACQ_CTL = 0x53, + TRL_NOMINAL_RATE_1 = 0x54, + TRL_NOMINAL_RATE_0 = 0x55, + INPUT_FREQ_1 = 0x56, + INPUT_FREQ_0 = 0x57, + TUNER_ADDR = 0x58, + CHAN_START_1 = 0x59, + CHAN_START_0 = 0x5A, + CONT_1 = 0x5B, + CONT_0 = 0x5C, + TUNER_GO = 0x5D, + STATUS_EN_0 = 0x5F, + STATUS_EN_1 = 0x60, + INTERRUPT_EN_0 = 0x61, + INTERRUPT_EN_1 = 0x62, + INTERRUPT_EN_2 = 0x63, + INTERRUPT_EN_3 = 0x64, + AGC_TARGET = 0x67, + AGC_CTL = 0x68, + CAPT_RANGE = 0x75, + SNR_SELECT_1 = 0x79, + SNR_SELECT_0 = 0x7A, + RS_ERR_PER_1 = 0x7C, + RS_ERR_PER_0 = 0x7D, + CHIP_ID = 0x7F, + CHAN_STOP_1 = 0x80, + CHAN_STOP_0 = 0x81, + CHAN_STEP_1 = 0x82, + CHAN_STEP_0 = 0x83, + FEC_LOCK_TIME = 0x85, + OFDM_LOCK_TIME = 0x86, + ACQ_DELAY = 0x87, + SCAN_CTL = 0x88, + CLOCK_CTL = 0x89, + CONFIG = 0x8A, + MCLK_RATIO = 0x8B, + GPP_CTL = 0x8C, + ADC_CTL_1 = 0x8E, + ADC_CTL_0 = 0x8F +}; + +/* here we assume 1/6MHz == 166.66kHz stepsize */ +#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ + +#endif /* _MT352_PRIV_ */ |