diff options
Diffstat (limited to 'drivers/media/dvb-frontends/rtl2832.c')
| -rw-r--r-- | drivers/media/dvb-frontends/rtl2832.c | 1149 |
1 files changed, 1149 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c new file mode 100644 index 000000000..4fa884eda --- /dev/null +++ b/drivers/media/dvb-frontends/rtl2832.c @@ -0,0 +1,1149 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Realtek RTL2832 DVB-T demodulator driver + * + * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com> + * Copyright (C) 2012-2014 Antti Palosaari <crope@iki.fi> + */ + +#include "rtl2832_priv.h" + +#define REG_MASK(b) (BIT(b + 1) - 1) + +static const struct rtl2832_reg_entry registers[] = { + [DVBT_SOFT_RST] = {0x101, 2, 2}, + [DVBT_IIC_REPEAT] = {0x101, 3, 3}, + [DVBT_TR_WAIT_MIN_8K] = {0x188, 11, 2}, + [DVBT_RSD_BER_FAIL_VAL] = {0x18f, 15, 0}, + [DVBT_EN_BK_TRK] = {0x1a6, 7, 7}, + [DVBT_AD_EN_REG] = {0x008, 7, 7}, + [DVBT_AD_EN_REG1] = {0x008, 6, 6}, + [DVBT_EN_BBIN] = {0x1b1, 0, 0}, + [DVBT_MGD_THD0] = {0x195, 7, 0}, + [DVBT_MGD_THD1] = {0x196, 7, 0}, + [DVBT_MGD_THD2] = {0x197, 7, 0}, + [DVBT_MGD_THD3] = {0x198, 7, 0}, + [DVBT_MGD_THD4] = {0x199, 7, 0}, + [DVBT_MGD_THD5] = {0x19a, 7, 0}, + [DVBT_MGD_THD6] = {0x19b, 7, 0}, + [DVBT_MGD_THD7] = {0x19c, 7, 0}, + [DVBT_EN_CACQ_NOTCH] = {0x161, 4, 4}, + [DVBT_AD_AV_REF] = {0x009, 6, 0}, + [DVBT_REG_PI] = {0x00a, 2, 0}, + [DVBT_PIP_ON] = {0x021, 3, 3}, + [DVBT_SCALE1_B92] = {0x292, 7, 0}, + [DVBT_SCALE1_B93] = {0x293, 7, 0}, + [DVBT_SCALE1_BA7] = {0x2a7, 7, 0}, + [DVBT_SCALE1_BA9] = {0x2a9, 7, 0}, + [DVBT_SCALE1_BAA] = {0x2aa, 7, 0}, + [DVBT_SCALE1_BAB] = {0x2ab, 7, 0}, + [DVBT_SCALE1_BAC] = {0x2ac, 7, 0}, + [DVBT_SCALE1_BB0] = {0x2b0, 7, 0}, + [DVBT_SCALE1_BB1] = {0x2b1, 7, 0}, + [DVBT_KB_P1] = {0x164, 3, 1}, + [DVBT_KB_P2] = {0x164, 6, 4}, + [DVBT_KB_P3] = {0x165, 2, 0}, + [DVBT_OPT_ADC_IQ] = {0x006, 5, 4}, + [DVBT_AD_AVI] = {0x009, 1, 0}, + [DVBT_AD_AVQ] = {0x009, 3, 2}, + [DVBT_K1_CR_STEP12] = {0x2ad, 9, 4}, + [DVBT_TRK_KS_P2] = {0x16f, 2, 0}, + [DVBT_TRK_KS_I2] = {0x170, 5, 3}, + [DVBT_TR_THD_SET2] = {0x172, 3, 0}, + [DVBT_TRK_KC_P2] = {0x173, 5, 3}, + [DVBT_TRK_KC_I2] = {0x175, 2, 0}, + [DVBT_CR_THD_SET2] = {0x176, 7, 6}, + [DVBT_PSET_IFFREQ] = {0x119, 21, 0}, + [DVBT_SPEC_INV] = {0x115, 0, 0}, + [DVBT_RSAMP_RATIO] = {0x19f, 27, 2}, + [DVBT_CFREQ_OFF_RATIO] = {0x19d, 23, 4}, + [DVBT_FSM_STAGE] = {0x351, 6, 3}, + [DVBT_RX_CONSTEL] = {0x33c, 3, 2}, + [DVBT_RX_HIER] = {0x33c, 6, 4}, + [DVBT_RX_C_RATE_LP] = {0x33d, 2, 0}, + [DVBT_RX_C_RATE_HP] = {0x33d, 5, 3}, + [DVBT_GI_IDX] = {0x351, 1, 0}, + [DVBT_FFT_MODE_IDX] = {0x351, 2, 2}, + [DVBT_RSD_BER_EST] = {0x34e, 15, 0}, + [DVBT_CE_EST_EVM] = {0x40c, 15, 0}, + [DVBT_RF_AGC_VAL] = {0x35b, 13, 0}, + [DVBT_IF_AGC_VAL] = {0x359, 13, 0}, + [DVBT_DAGC_VAL] = {0x305, 7, 0}, + [DVBT_SFREQ_OFF] = {0x318, 13, 0}, + [DVBT_CFREQ_OFF] = {0x35f, 17, 0}, + [DVBT_POLAR_RF_AGC] = {0x00e, 1, 1}, + [DVBT_POLAR_IF_AGC] = {0x00e, 0, 0}, + [DVBT_AAGC_HOLD] = {0x104, 5, 5}, + [DVBT_EN_RF_AGC] = {0x104, 6, 6}, + [DVBT_EN_IF_AGC] = {0x104, 7, 7}, + [DVBT_IF_AGC_MIN] = {0x108, 7, 0}, + [DVBT_IF_AGC_MAX] = {0x109, 7, 0}, + [DVBT_RF_AGC_MIN] = {0x10a, 7, 0}, + [DVBT_RF_AGC_MAX] = {0x10b, 7, 0}, + [DVBT_IF_AGC_MAN] = {0x10c, 6, 6}, + [DVBT_IF_AGC_MAN_VAL] = {0x10c, 13, 0}, + [DVBT_RF_AGC_MAN] = {0x10e, 6, 6}, + [DVBT_RF_AGC_MAN_VAL] = {0x10e, 13, 0}, + [DVBT_DAGC_TRG_VAL] = {0x112, 7, 0}, + [DVBT_AGC_TARG_VAL_0] = {0x102, 0, 0}, + [DVBT_AGC_TARG_VAL_8_1] = {0x103, 7, 0}, + [DVBT_AAGC_LOOP_GAIN] = {0x1c7, 5, 1}, + [DVBT_LOOP_GAIN2_3_0] = {0x104, 4, 1}, + [DVBT_LOOP_GAIN2_4] = {0x105, 7, 7}, + [DVBT_LOOP_GAIN3] = {0x1c8, 4, 0}, + [DVBT_VTOP1] = {0x106, 5, 0}, + [DVBT_VTOP2] = {0x1c9, 5, 0}, + [DVBT_VTOP3] = {0x1ca, 5, 0}, + [DVBT_KRF1] = {0x1cb, 7, 0}, + [DVBT_KRF2] = {0x107, 7, 0}, + [DVBT_KRF3] = {0x1cd, 7, 0}, + [DVBT_KRF4] = {0x1ce, 7, 0}, + [DVBT_EN_GI_PGA] = {0x1e5, 0, 0}, + [DVBT_THD_LOCK_UP] = {0x1d9, 8, 0}, + [DVBT_THD_LOCK_DW] = {0x1db, 8, 0}, + [DVBT_THD_UP1] = {0x1dd, 7, 0}, + [DVBT_THD_DW1] = {0x1de, 7, 0}, + [DVBT_INTER_CNT_LEN] = {0x1d8, 3, 0}, + [DVBT_GI_PGA_STATE] = {0x1e6, 3, 3}, + [DVBT_EN_AGC_PGA] = {0x1d7, 0, 0}, + [DVBT_CKOUTPAR] = {0x17b, 5, 5}, + [DVBT_CKOUT_PWR] = {0x17b, 6, 6}, + [DVBT_SYNC_DUR] = {0x17b, 7, 7}, + [DVBT_ERR_DUR] = {0x17c, 0, 0}, + [DVBT_SYNC_LVL] = {0x17c, 1, 1}, + [DVBT_ERR_LVL] = {0x17c, 2, 2}, + [DVBT_VAL_LVL] = {0x17c, 3, 3}, + [DVBT_SERIAL] = {0x17c, 4, 4}, + [DVBT_SER_LSB] = {0x17c, 5, 5}, + [DVBT_CDIV_PH0] = {0x17d, 3, 0}, + [DVBT_CDIV_PH1] = {0x17d, 7, 4}, + [DVBT_MPEG_IO_OPT_2_2] = {0x006, 7, 7}, + [DVBT_MPEG_IO_OPT_1_0] = {0x007, 7, 6}, + [DVBT_CKOUTPAR_PIP] = {0x0b7, 4, 4}, + [DVBT_CKOUT_PWR_PIP] = {0x0b7, 3, 3}, + [DVBT_SYNC_LVL_PIP] = {0x0b7, 2, 2}, + [DVBT_ERR_LVL_PIP] = {0x0b7, 1, 1}, + [DVBT_VAL_LVL_PIP] = {0x0b7, 0, 0}, + [DVBT_CKOUTPAR_PID] = {0x0b9, 4, 4}, + [DVBT_CKOUT_PWR_PID] = {0x0b9, 3, 3}, + [DVBT_SYNC_LVL_PID] = {0x0b9, 2, 2}, + [DVBT_ERR_LVL_PID] = {0x0b9, 1, 1}, + [DVBT_VAL_LVL_PID] = {0x0b9, 0, 0}, + [DVBT_SM_PASS] = {0x193, 11, 0}, + [DVBT_AD7_SETTING] = {0x011, 15, 0}, + [DVBT_RSSI_R] = {0x301, 6, 0}, + [DVBT_ACI_DET_IND] = {0x312, 0, 0}, + [DVBT_REG_MON] = {0x00d, 1, 0}, + [DVBT_REG_MONSEL] = {0x00d, 2, 2}, + [DVBT_REG_GPE] = {0x00d, 7, 7}, + [DVBT_REG_GPO] = {0x010, 0, 0}, + [DVBT_REG_4MSEL] = {0x013, 0, 0}, +}; + +static int rtl2832_rd_demod_reg(struct rtl2832_dev *dev, int reg, u32 *val) +{ + struct i2c_client *client = dev->client; + int ret, i; + u16 reg_start_addr; + u8 msb, lsb, reading[4], len; + u32 reading_tmp, mask; + + reg_start_addr = registers[reg].start_address; + msb = registers[reg].msb; + lsb = registers[reg].lsb; + len = (msb >> 3) + 1; + mask = REG_MASK(msb - lsb); + + ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len); + if (ret) + goto err; + + reading_tmp = 0; + for (i = 0; i < len; i++) + reading_tmp |= reading[i] << ((len - 1 - i) * 8); + + *val = (reading_tmp >> lsb) & mask; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_wr_demod_reg(struct rtl2832_dev *dev, int reg, u32 val) +{ + struct i2c_client *client = dev->client; + int ret, i; + u16 reg_start_addr; + u8 msb, lsb, reading[4], writing[4], len; + u32 reading_tmp, writing_tmp, mask; + + reg_start_addr = registers[reg].start_address; + msb = registers[reg].msb; + lsb = registers[reg].lsb; + len = (msb >> 3) + 1; + mask = REG_MASK(msb - lsb); + + ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len); + if (ret) + goto err; + + reading_tmp = 0; + for (i = 0; i < len; i++) + reading_tmp |= reading[i] << ((len - 1 - i) * 8); + + writing_tmp = reading_tmp & ~(mask << lsb); + writing_tmp |= ((val & mask) << lsb); + + for (i = 0; i < len; i++) + writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff; + + ret = regmap_bulk_write(dev->regmap, reg_start_addr, writing, len); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + int ret; + u64 pset_iffreq; + u8 en_bbin = (if_freq == 0 ? 0x1 : 0x0); + + /* + * PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22) + * / CrystalFreqHz) + */ + pset_iffreq = if_freq % dev->pdata->clk; + pset_iffreq *= 0x400000; + pset_iffreq = div_u64(pset_iffreq, dev->pdata->clk); + pset_iffreq = -pset_iffreq; + pset_iffreq = pset_iffreq & 0x3fffff; + dev_dbg(&client->dev, "if_frequency=%d pset_iffreq=%08x\n", + if_freq, (unsigned)pset_iffreq); + + ret = rtl2832_wr_demod_reg(dev, DVBT_EN_BBIN, en_bbin); + if (ret) + goto err; + + ret = rtl2832_wr_demod_reg(dev, DVBT_PSET_IFFREQ, pset_iffreq); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_init(struct dvb_frontend *fe) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache; + const struct rtl2832_reg_value *init; + int i, ret, len; + /* initialization values for the demodulator registers */ + struct rtl2832_reg_value rtl2832_initial_regs[] = { + {DVBT_AD_EN_REG, 0x1}, + {DVBT_AD_EN_REG1, 0x1}, + {DVBT_RSD_BER_FAIL_VAL, 0x2800}, + {DVBT_MGD_THD0, 0x10}, + {DVBT_MGD_THD1, 0x20}, + {DVBT_MGD_THD2, 0x20}, + {DVBT_MGD_THD3, 0x40}, + {DVBT_MGD_THD4, 0x22}, + {DVBT_MGD_THD5, 0x32}, + {DVBT_MGD_THD6, 0x37}, + {DVBT_MGD_THD7, 0x39}, + {DVBT_EN_BK_TRK, 0x0}, + {DVBT_EN_CACQ_NOTCH, 0x0}, + {DVBT_AD_AV_REF, 0x2a}, + {DVBT_REG_PI, 0x6}, + {DVBT_PIP_ON, 0x0}, + {DVBT_CDIV_PH0, 0x8}, + {DVBT_CDIV_PH1, 0x8}, + {DVBT_SCALE1_B92, 0x4}, + {DVBT_SCALE1_B93, 0xb0}, + {DVBT_SCALE1_BA7, 0x78}, + {DVBT_SCALE1_BA9, 0x28}, + {DVBT_SCALE1_BAA, 0x59}, + {DVBT_SCALE1_BAB, 0x83}, + {DVBT_SCALE1_BAC, 0xd4}, + {DVBT_SCALE1_BB0, 0x65}, + {DVBT_SCALE1_BB1, 0x43}, + {DVBT_KB_P1, 0x1}, + {DVBT_KB_P2, 0x4}, + {DVBT_KB_P3, 0x7}, + {DVBT_K1_CR_STEP12, 0xa}, + {DVBT_REG_GPE, 0x1}, + {DVBT_SERIAL, 0x0}, + {DVBT_CDIV_PH0, 0x9}, + {DVBT_CDIV_PH1, 0x9}, + {DVBT_MPEG_IO_OPT_2_2, 0x0}, + {DVBT_MPEG_IO_OPT_1_0, 0x0}, + {DVBT_TRK_KS_P2, 0x4}, + {DVBT_TRK_KS_I2, 0x7}, + {DVBT_TR_THD_SET2, 0x6}, + {DVBT_TRK_KC_I2, 0x5}, + {DVBT_CR_THD_SET2, 0x1}, + }; + + dev_dbg(&client->dev, "\n"); + + ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0); + if (ret) + goto err; + + for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) { + ret = rtl2832_wr_demod_reg(dev, rtl2832_initial_regs[i].reg, + rtl2832_initial_regs[i].value); + if (ret) + goto err; + } + + /* load tuner specific settings */ + dev_dbg(&client->dev, "load settings for tuner=%02x\n", + dev->pdata->tuner); + switch (dev->pdata->tuner) { + case RTL2832_TUNER_FC2580: + len = ARRAY_SIZE(rtl2832_tuner_init_fc2580); + init = rtl2832_tuner_init_fc2580; + break; + case RTL2832_TUNER_FC0012: + case RTL2832_TUNER_FC0013: + len = ARRAY_SIZE(rtl2832_tuner_init_fc0012); + init = rtl2832_tuner_init_fc0012; + break; + case RTL2832_TUNER_TUA9001: + len = ARRAY_SIZE(rtl2832_tuner_init_tua9001); + init = rtl2832_tuner_init_tua9001; + break; + case RTL2832_TUNER_E4000: + len = ARRAY_SIZE(rtl2832_tuner_init_e4000); + init = rtl2832_tuner_init_e4000; + break; + case RTL2832_TUNER_R820T: + case RTL2832_TUNER_R828D: + len = ARRAY_SIZE(rtl2832_tuner_init_r820t); + init = rtl2832_tuner_init_r820t; + break; + case RTL2832_TUNER_SI2157: + len = ARRAY_SIZE(rtl2832_tuner_init_si2157); + init = rtl2832_tuner_init_si2157; + break; + default: + ret = -EINVAL; + goto err; + } + + for (i = 0; i < len; i++) { + ret = rtl2832_wr_demod_reg(dev, init[i].reg, init[i].value); + if (ret) + goto err; + } + + /* init stats here in order signal app which stats are supported */ + c->strength.len = 1; + c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->cnr.len = 1; + c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_error.len = 1; + c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.len = 1; + c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + dev->sleeping = false; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_sleep(struct dvb_frontend *fe) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + int ret; + + dev_dbg(&client->dev, "\n"); + + dev->sleeping = true; + dev->fe_status = 0; + + ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *s) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + + dev_dbg(&client->dev, "\n"); + s->min_delay_ms = 1000; + s->step_size = fe->ops.info.frequency_stepsize_hz * 2; + s->max_drift = (fe->ops.info.frequency_stepsize_hz * 2) + 1; + return 0; +} + +static int rtl2832_set_frontend(struct dvb_frontend *fe) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret, i, j; + u64 bw_mode, num, num2; + u32 resamp_ratio, cfreq_off_ratio; + static u8 bw_params[3][32] = { + /* 6 MHz bandwidth */ + { + 0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f, + 0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2, + 0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67, + 0x19, 0xe0, + }, + + /* 7 MHz bandwidth */ + { + 0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf, + 0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30, + 0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22, + 0x19, 0x10, + }, + + /* 8 MHz bandwidth */ + { + 0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf, + 0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7, + 0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8, + 0x19, 0xe0, + }, + }; + + dev_dbg(&client->dev, "frequency=%u bandwidth_hz=%u inversion=%u\n", + c->frequency, c->bandwidth_hz, c->inversion); + + /* program tuner */ + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe); + + /* If the frontend has get_if_frequency(), use it */ + if (fe->ops.tuner_ops.get_if_frequency) { + u32 if_freq; + + ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq); + if (ret) + goto err; + + ret = rtl2832_set_if(fe, if_freq); + if (ret) + goto err; + } + + switch (c->bandwidth_hz) { + case 6000000: + i = 0; + bw_mode = 48000000; + break; + case 7000000: + i = 1; + bw_mode = 56000000; + break; + case 8000000: + i = 2; + bw_mode = 64000000; + break; + default: + dev_err(&client->dev, "invalid bandwidth_hz %u\n", + c->bandwidth_hz); + ret = -EINVAL; + goto err; + } + + for (j = 0; j < sizeof(bw_params[0]); j++) { + ret = regmap_bulk_write(dev->regmap, + 0x11c + j, &bw_params[i][j], 1); + if (ret) + goto err; + } + + /* calculate and set resample ratio + * RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22) + * / ConstWithBandwidthMode) + */ + num = dev->pdata->clk * 7ULL; + num *= 0x400000; + num = div_u64(num, bw_mode); + resamp_ratio = num & 0x3ffffff; + ret = rtl2832_wr_demod_reg(dev, DVBT_RSAMP_RATIO, resamp_ratio); + if (ret) + goto err; + + /* calculate and set cfreq off ratio + * CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20) + * / (CrystalFreqHz * 7)) + */ + num = bw_mode << 20; + num2 = dev->pdata->clk * 7ULL; + num = div_u64(num, num2); + num = -num; + cfreq_off_ratio = num & 0xfffff; + ret = rtl2832_wr_demod_reg(dev, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio); + if (ret) + goto err; + + /* soft reset */ + ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1); + if (ret) + goto err; + + ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_get_frontend(struct dvb_frontend *fe, + struct dtv_frontend_properties *c) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + int ret; + u8 buf[3]; + + if (dev->sleeping) + return 0; + + ret = regmap_bulk_read(dev->regmap, 0x33c, buf, 2); + if (ret) + goto err; + + ret = regmap_bulk_read(dev->regmap, 0x351, &buf[2], 1); + if (ret) + goto err; + + dev_dbg(&client->dev, "TPS=%*ph\n", 3, buf); + + switch ((buf[0] >> 2) & 3) { + case 0: + c->modulation = QPSK; + break; + case 1: + c->modulation = QAM_16; + break; + case 2: + c->modulation = QAM_64; + break; + } + + switch ((buf[2] >> 2) & 1) { + case 0: + c->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + c->transmission_mode = TRANSMISSION_MODE_8K; + } + + switch ((buf[2] >> 0) & 3) { + case 0: + c->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + c->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + c->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + c->guard_interval = GUARD_INTERVAL_1_4; + break; + } + + switch ((buf[0] >> 4) & 7) { + case 0: + c->hierarchy = HIERARCHY_NONE; + break; + case 1: + c->hierarchy = HIERARCHY_1; + break; + case 2: + c->hierarchy = HIERARCHY_2; + break; + case 3: + c->hierarchy = HIERARCHY_4; + break; + } + + switch ((buf[1] >> 3) & 7) { + case 0: + c->code_rate_HP = FEC_1_2; + break; + case 1: + c->code_rate_HP = FEC_2_3; + break; + case 2: + c->code_rate_HP = FEC_3_4; + break; + case 3: + c->code_rate_HP = FEC_5_6; + break; + case 4: + c->code_rate_HP = FEC_7_8; + break; + } + + switch ((buf[1] >> 0) & 7) { + case 0: + c->code_rate_LP = FEC_1_2; + break; + case 1: + c->code_rate_LP = FEC_2_3; + break; + case 2: + c->code_rate_LP = FEC_3_4; + break; + case 3: + c->code_rate_LP = FEC_5_6; + break; + case 4: + c->code_rate_LP = FEC_7_8; + break; + } + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_read_status(struct dvb_frontend *fe, enum fe_status *status) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int ret; + u32 tmp; + u8 u8tmp, buf[2]; + u16 u16tmp; + + dev_dbg(&client->dev, "\n"); + + *status = 0; + if (dev->sleeping) + return 0; + + ret = rtl2832_rd_demod_reg(dev, DVBT_FSM_STAGE, &tmp); + if (ret) + goto err; + + if (tmp == 11) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + } else if (tmp == 10) { + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI; + } + + dev->fe_status = *status; + + /* signal strength */ + if (dev->fe_status & FE_HAS_SIGNAL) { + /* read digital AGC */ + ret = regmap_bulk_read(dev->regmap, 0x305, &u8tmp, 1); + if (ret) + goto err; + + dev_dbg(&client->dev, "digital agc=%02x", u8tmp); + + u8tmp = ~u8tmp; + u16tmp = u8tmp << 8 | u8tmp << 0; + + c->strength.stat[0].scale = FE_SCALE_RELATIVE; + c->strength.stat[0].uvalue = u16tmp; + } else { + c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + } + + /* CNR */ + if (dev->fe_status & FE_HAS_VITERBI) { + unsigned hierarchy, constellation; + #define CONSTELLATION_NUM 3 + #define HIERARCHY_NUM 4 + static const u32 constant[CONSTELLATION_NUM][HIERARCHY_NUM] = { + {85387325, 85387325, 85387325, 85387325}, + {86676178, 86676178, 87167949, 87795660}, + {87659938, 87659938, 87885178, 88241743}, + }; + + ret = regmap_bulk_read(dev->regmap, 0x33c, &u8tmp, 1); + if (ret) + goto err; + + constellation = (u8tmp >> 2) & 0x03; /* [3:2] */ + ret = -EINVAL; + if (constellation > CONSTELLATION_NUM - 1) + goto err; + + hierarchy = (u8tmp >> 4) & 0x07; /* [6:4] */ + if (hierarchy > HIERARCHY_NUM - 1) + goto err; + + ret = regmap_bulk_read(dev->regmap, 0x40c, buf, 2); + if (ret) + goto err; + + u16tmp = buf[0] << 8 | buf[1] << 0; + if (u16tmp) + tmp = (constant[constellation][hierarchy] - + intlog10(u16tmp)) / ((1 << 24) / 10000); + else + tmp = 0; + + dev_dbg(&client->dev, "cnr raw=%u\n", u16tmp); + + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + c->cnr.stat[0].svalue = tmp; + } else { + c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + } + + /* BER */ + if (dev->fe_status & FE_HAS_LOCK) { + ret = regmap_bulk_read(dev->regmap, 0x34e, buf, 2); + if (ret) + goto err; + + u16tmp = buf[0] << 8 | buf[1] << 0; + dev->post_bit_error += u16tmp; + dev->post_bit_count += 1000000; + + dev_dbg(&client->dev, "ber errors=%u total=1000000\n", u16tmp); + + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue = dev->post_bit_error; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].uvalue = dev->post_bit_count; + } else { + c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + } + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + /* report SNR in resolution of 0.1 dB */ + if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL) + *snr = div_s64(c->cnr.stat[0].svalue, 100); + else + *snr = 0; + + return 0; +} + +static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + + *ber = (dev->post_bit_error - dev->post_bit_error_prev); + dev->post_bit_error_prev = dev->post_bit_error; + + return 0; +} + +/* + * I2C gate/mux/repeater logic + * There is delay mechanism to avoid unneeded I2C gate open / close. Gate close + * is delayed here a little bit in order to see if there is sequence of I2C + * messages sent to same I2C bus. + */ +static void rtl2832_i2c_gate_work(struct work_struct *work) +{ + struct rtl2832_dev *dev = container_of(work, struct rtl2832_dev, i2c_gate_work.work); + struct i2c_client *client = dev->client; + int ret; + + /* close gate */ + ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x00); + if (ret) + goto err; + + return; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); +} + +static int rtl2832_select(struct i2c_mux_core *muxc, u32 chan_id) +{ + struct rtl2832_dev *dev = i2c_mux_priv(muxc); + struct i2c_client *client = dev->client; + int ret; + + /* terminate possible gate closing */ + cancel_delayed_work(&dev->i2c_gate_work); + + /* open gate */ + ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x08); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_deselect(struct i2c_mux_core *muxc, u32 chan_id) +{ + struct rtl2832_dev *dev = i2c_mux_priv(muxc); + + schedule_delayed_work(&dev->i2c_gate_work, usecs_to_jiffies(100)); + return 0; +} + +static const struct dvb_frontend_ops rtl2832_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Realtek RTL2832 (DVB-T)", + .frequency_min_hz = 174 * MHz, + .frequency_max_hz = 862 * MHz, + .frequency_stepsize_hz = 166667, + .caps = FE_CAN_FEC_1_2 | + FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QPSK | + FE_CAN_QAM_16 | + FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER | + FE_CAN_MUTE_TS + }, + + .init = rtl2832_init, + .sleep = rtl2832_sleep, + + .get_tune_settings = rtl2832_get_tune_settings, + + .set_frontend = rtl2832_set_frontend, + .get_frontend = rtl2832_get_frontend, + + .read_status = rtl2832_read_status, + .read_snr = rtl2832_read_snr, + .read_ber = rtl2832_read_ber, +}; + +static bool rtl2832_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x305: + case 0x33c: + case 0x34e: + case 0x351: + case 0x40c ... 0x40d: + return true; + default: + break; + } + + return false; +} + +static struct dvb_frontend *rtl2832_get_dvb_frontend(struct i2c_client *client) +{ + struct rtl2832_dev *dev = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "\n"); + return &dev->fe; +} + +static struct i2c_adapter *rtl2832_get_i2c_adapter(struct i2c_client *client) +{ + struct rtl2832_dev *dev = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "\n"); + return dev->muxc->adapter[0]; +} + +static int rtl2832_slave_ts_ctrl(struct i2c_client *client, bool enable) +{ + struct rtl2832_dev *dev = i2c_get_clientdata(client); + int ret; + + dev_dbg(&client->dev, "enable=%d\n", enable); + + if (enable) { + ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0); + if (ret) + goto err; + ret = regmap_bulk_write(dev->regmap, 0x10c, "\x5f\xff", 2); + if (ret) + goto err; + ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x1); + if (ret) + goto err; + ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x18", 1); + if (ret) + goto err; + ret = regmap_bulk_write(dev->regmap, 0x192, "\x7f\xf7\xff", 3); + if (ret) + goto err; + } else { + ret = regmap_bulk_write(dev->regmap, 0x192, "\x00\x0f\xff", 3); + if (ret) + goto err; + ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x08", 1); + if (ret) + goto err; + ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x0); + if (ret) + goto err; + ret = regmap_bulk_write(dev->regmap, 0x10c, "\x00\x00", 2); + if (ret) + goto err; + ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1); + if (ret) + goto err; + } + + dev->slave_ts = enable; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_pid_filter_ctrl(struct dvb_frontend *fe, int onoff) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + int ret; + u8 u8tmp; + + dev_dbg(&client->dev, "onoff=%d, slave_ts=%d\n", onoff, dev->slave_ts); + + /* enable / disable PID filter */ + if (onoff) + u8tmp = 0x80; + else + u8tmp = 0x00; + + if (dev->slave_ts) + ret = regmap_update_bits(dev->regmap, 0x021, 0xc0, u8tmp); + else + ret = regmap_update_bits(dev->regmap, 0x061, 0xc0, u8tmp); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid, + int onoff) +{ + struct rtl2832_dev *dev = fe->demodulator_priv; + struct i2c_client *client = dev->client; + int ret; + u8 buf[4]; + + dev_dbg(&client->dev, "index=%d pid=%04x onoff=%d slave_ts=%d\n", + index, pid, onoff, dev->slave_ts); + + /* skip invalid PIDs (0x2000) */ + if (pid > 0x1fff || index > 32) + return 0; + + if (onoff) + set_bit(index, &dev->filters); + else + clear_bit(index, &dev->filters); + + /* enable / disable PIDs */ + buf[0] = (dev->filters >> 0) & 0xff; + buf[1] = (dev->filters >> 8) & 0xff; + buf[2] = (dev->filters >> 16) & 0xff; + buf[3] = (dev->filters >> 24) & 0xff; + + if (dev->slave_ts) + ret = regmap_bulk_write(dev->regmap, 0x022, buf, 4); + else + ret = regmap_bulk_write(dev->regmap, 0x062, buf, 4); + if (ret) + goto err; + + /* add PID */ + buf[0] = (pid >> 8) & 0xff; + buf[1] = (pid >> 0) & 0xff; + + if (dev->slave_ts) + ret = regmap_bulk_write(dev->regmap, 0x026 + 2 * index, buf, 2); + else + ret = regmap_bulk_write(dev->regmap, 0x066 + 2 * index, buf, 2); + if (ret) + goto err; + + return 0; +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static int rtl2832_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct rtl2832_platform_data *pdata = client->dev.platform_data; + struct i2c_adapter *i2c = client->adapter; + struct rtl2832_dev *dev; + int ret; + u8 tmp; + static const struct regmap_range_cfg regmap_range_cfg[] = { + { + .selector_reg = 0x00, + .selector_mask = 0xff, + .selector_shift = 0, + .window_start = 0, + .window_len = 0x100, + .range_min = 0 * 0x100, + .range_max = 5 * 0x100, + }, + }; + + dev_dbg(&client->dev, "\n"); + + /* allocate memory for the internal state */ + dev = kzalloc(sizeof(struct rtl2832_dev), GFP_KERNEL); + if (dev == NULL) { + ret = -ENOMEM; + goto err; + } + + /* setup the state */ + i2c_set_clientdata(client, dev); + dev->client = client; + dev->pdata = client->dev.platform_data; + dev->sleeping = true; + INIT_DELAYED_WORK(&dev->i2c_gate_work, rtl2832_i2c_gate_work); + /* create regmap */ + dev->regmap_config.reg_bits = 8; + dev->regmap_config.val_bits = 8; + dev->regmap_config.volatile_reg = rtl2832_volatile_reg; + dev->regmap_config.max_register = 5 * 0x100; + dev->regmap_config.ranges = regmap_range_cfg; + dev->regmap_config.num_ranges = ARRAY_SIZE(regmap_range_cfg); + dev->regmap_config.cache_type = REGCACHE_NONE; + dev->regmap = regmap_init_i2c(client, &dev->regmap_config); + if (IS_ERR(dev->regmap)) { + ret = PTR_ERR(dev->regmap); + goto err_kfree; + } + + /* check if the demod is there */ + ret = regmap_bulk_read(dev->regmap, 0x000, &tmp, 1); + if (ret) + goto err_regmap_exit; + + /* create muxed i2c adapter for demod tuner bus */ + dev->muxc = i2c_mux_alloc(i2c, &i2c->dev, 1, 0, I2C_MUX_LOCKED, + rtl2832_select, rtl2832_deselect); + if (!dev->muxc) { + ret = -ENOMEM; + goto err_regmap_exit; + } + dev->muxc->priv = dev; + ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0); + if (ret) + goto err_regmap_exit; + + /* create dvb_frontend */ + memcpy(&dev->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops)); + dev->fe.demodulator_priv = dev; + + /* setup callbacks */ + pdata->get_dvb_frontend = rtl2832_get_dvb_frontend; + pdata->get_i2c_adapter = rtl2832_get_i2c_adapter; + pdata->slave_ts_ctrl = rtl2832_slave_ts_ctrl; + pdata->pid_filter = rtl2832_pid_filter; + pdata->pid_filter_ctrl = rtl2832_pid_filter_ctrl; + pdata->regmap = dev->regmap; + + dev_info(&client->dev, "Realtek RTL2832 successfully attached\n"); + return 0; +err_regmap_exit: + regmap_exit(dev->regmap); +err_kfree: + kfree(dev); +err: + dev_dbg(&client->dev, "failed=%d\n", ret); + return ret; +} + +static void rtl2832_remove(struct i2c_client *client) +{ + struct rtl2832_dev *dev = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "\n"); + + cancel_delayed_work_sync(&dev->i2c_gate_work); + + i2c_mux_del_adapters(dev->muxc); + + regmap_exit(dev->regmap); + + kfree(dev); +} + +static const struct i2c_device_id rtl2832_id_table[] = { + {"rtl2832", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, rtl2832_id_table); + +static struct i2c_driver rtl2832_driver = { + .driver = { + .name = "rtl2832", + .suppress_bind_attrs = true, + }, + .probe = rtl2832_probe, + .remove = rtl2832_remove, + .id_table = rtl2832_id_table, +}; + +module_i2c_driver(rtl2832_driver); + +MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver"); +MODULE_LICENSE("GPL"); |