summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/sm501.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/sm501.c')
-rw-r--r--drivers/mfd/sm501.c1743
1 files changed, 1743 insertions, 0 deletions
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
new file mode 100644
index 000000000..3ac4508a6
--- /dev/null
+++ b/drivers/mfd/sm501.c
@@ -0,0 +1,1743 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* linux/drivers/mfd/sm501.c
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * SM501 MFD driver
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/platform_data/i2c-gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/slab.h>
+
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/serial_8250.h>
+
+#include <linux/io.h>
+
+struct sm501_device {
+ struct list_head list;
+ struct platform_device pdev;
+};
+
+struct sm501_gpio;
+
+#ifdef CONFIG_MFD_SM501_GPIO
+#include <linux/gpio.h>
+
+struct sm501_gpio_chip {
+ struct gpio_chip gpio;
+ struct sm501_gpio *ourgpio; /* to get back to parent. */
+ void __iomem *regbase;
+ void __iomem *control; /* address of control reg. */
+};
+
+struct sm501_gpio {
+ struct sm501_gpio_chip low;
+ struct sm501_gpio_chip high;
+ spinlock_t lock;
+
+ unsigned int registered : 1;
+ void __iomem *regs;
+ struct resource *regs_res;
+};
+#else
+struct sm501_gpio {
+ /* no gpio support, empty definition for sm501_devdata. */
+};
+#endif
+
+struct sm501_devdata {
+ spinlock_t reg_lock;
+ struct mutex clock_lock;
+ struct list_head devices;
+ struct sm501_gpio gpio;
+
+ struct device *dev;
+ struct resource *io_res;
+ struct resource *mem_res;
+ struct resource *regs_claim;
+ struct sm501_platdata *platdata;
+
+
+ unsigned int in_suspend;
+ unsigned long pm_misc;
+
+ int unit_power[20];
+ unsigned int pdev_id;
+ unsigned int irq;
+ void __iomem *regs;
+ unsigned int rev;
+};
+
+
+#define MHZ (1000 * 1000)
+
+#ifdef DEBUG
+static const unsigned int div_tab[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 4,
+ [3] = 8,
+ [4] = 16,
+ [5] = 32,
+ [6] = 64,
+ [7] = 128,
+ [8] = 3,
+ [9] = 6,
+ [10] = 12,
+ [11] = 24,
+ [12] = 48,
+ [13] = 96,
+ [14] = 192,
+ [15] = 384,
+ [16] = 5,
+ [17] = 10,
+ [18] = 20,
+ [19] = 40,
+ [20] = 80,
+ [21] = 160,
+ [22] = 320,
+ [23] = 604,
+};
+
+static unsigned long decode_div(unsigned long pll2, unsigned long val,
+ unsigned int lshft, unsigned int selbit,
+ unsigned long mask)
+{
+ if (val & selbit)
+ pll2 = 288 * MHZ;
+
+ return pll2 / div_tab[(val >> lshft) & mask];
+}
+
+#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
+
+/* sm501_dump_clk
+ *
+ * Print out the current clock configuration for the device
+*/
+
+static void sm501_dump_clk(struct sm501_devdata *sm)
+{
+ unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING);
+ unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
+ unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
+ unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ unsigned long sdclk0, sdclk1;
+ unsigned long pll2 = 0;
+
+ switch (misct & 0x30) {
+ case 0x00:
+ pll2 = 336 * MHZ;
+ break;
+ case 0x10:
+ pll2 = 288 * MHZ;
+ break;
+ case 0x20:
+ pll2 = 240 * MHZ;
+ break;
+ case 0x30:
+ pll2 = 192 * MHZ;
+ break;
+ }
+
+ sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
+ sdclk0 /= div_tab[((misct >> 8) & 0xf)];
+
+ sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
+ sdclk1 /= div_tab[((misct >> 16) & 0xf)];
+
+ dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
+ misct, pm0, pm1);
+
+ dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
+ fmt_freq(pll2), sdclk0, sdclk1);
+
+ dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
+
+ dev_dbg(sm->dev, "PM0[%c]: "
+ "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
+ "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
+ (pmc & 3 ) == 0 ? '*' : '-',
+ fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
+ fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
+ fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)),
+ fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15)));
+
+ dev_dbg(sm->dev, "PM1[%c]: "
+ "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
+ "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
+ (pmc & 3 ) == 1 ? '*' : '-',
+ fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
+ fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
+ fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)),
+ fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15)));
+}
+
+static void sm501_dump_regs(struct sm501_devdata *sm)
+{
+ void __iomem *regs = sm->regs;
+
+ dev_info(sm->dev, "System Control %08x\n",
+ smc501_readl(regs + SM501_SYSTEM_CONTROL));
+ dev_info(sm->dev, "Misc Control %08x\n",
+ smc501_readl(regs + SM501_MISC_CONTROL));
+ dev_info(sm->dev, "GPIO Control Low %08x\n",
+ smc501_readl(regs + SM501_GPIO31_0_CONTROL));
+ dev_info(sm->dev, "GPIO Control Hi %08x\n",
+ smc501_readl(regs + SM501_GPIO63_32_CONTROL));
+ dev_info(sm->dev, "DRAM Control %08x\n",
+ smc501_readl(regs + SM501_DRAM_CONTROL));
+ dev_info(sm->dev, "Arbitration Ctrl %08x\n",
+ smc501_readl(regs + SM501_ARBTRTN_CONTROL));
+ dev_info(sm->dev, "Misc Timing %08x\n",
+ smc501_readl(regs + SM501_MISC_TIMING));
+}
+
+static void sm501_dump_gate(struct sm501_devdata *sm)
+{
+ dev_info(sm->dev, "CurrentGate %08x\n",
+ smc501_readl(sm->regs + SM501_CURRENT_GATE));
+ dev_info(sm->dev, "CurrentClock %08x\n",
+ smc501_readl(sm->regs + SM501_CURRENT_CLOCK));
+ dev_info(sm->dev, "PowerModeControl %08x\n",
+ smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL));
+}
+
+#else
+static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
+static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
+static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
+#endif
+
+/* sm501_sync_regs
+ *
+ * ensure the
+*/
+
+static void sm501_sync_regs(struct sm501_devdata *sm)
+{
+ smc501_readl(sm->regs);
+}
+
+static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
+{
+ /* during suspend/resume, we are currently not allowed to sleep,
+ * so change to using mdelay() instead of msleep() if we
+ * are in one of these paths */
+
+ if (sm->in_suspend)
+ mdelay(delay);
+ else
+ msleep(delay);
+}
+
+/* sm501_misc_control
+ *
+ * alters the miscellaneous control parameters
+*/
+
+int sm501_misc_control(struct device *dev,
+ unsigned long set, unsigned long clear)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long misc;
+ unsigned long save;
+ unsigned long to;
+
+ spin_lock_irqsave(&sm->reg_lock, save);
+
+ misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
+ to = (misc & ~clear) | set;
+
+ if (to != misc) {
+ smc501_writel(to, sm->regs + SM501_MISC_CONTROL);
+ sm501_sync_regs(sm);
+
+ dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
+ }
+
+ spin_unlock_irqrestore(&sm->reg_lock, save);
+ return to;
+}
+
+EXPORT_SYMBOL_GPL(sm501_misc_control);
+
+/* sm501_modify_reg
+ *
+ * Modify a register in the SM501 which may be shared with other
+ * drivers.
+*/
+
+unsigned long sm501_modify_reg(struct device *dev,
+ unsigned long reg,
+ unsigned long set,
+ unsigned long clear)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long data;
+ unsigned long save;
+
+ spin_lock_irqsave(&sm->reg_lock, save);
+
+ data = smc501_readl(sm->regs + reg);
+ data |= set;
+ data &= ~clear;
+
+ smc501_writel(data, sm->regs + reg);
+ sm501_sync_regs(sm);
+
+ spin_unlock_irqrestore(&sm->reg_lock, save);
+
+ return data;
+}
+
+EXPORT_SYMBOL_GPL(sm501_modify_reg);
+
+/* sm501_unit_power
+ *
+ * alters the power active gate to set specific units on or off
+ */
+
+int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long mode;
+ unsigned long gate;
+ unsigned long clock;
+
+ mutex_lock(&sm->clock_lock);
+
+ mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+ clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+
+ mode &= 3; /* get current power mode */
+
+ if (unit >= ARRAY_SIZE(sm->unit_power)) {
+ dev_err(dev, "%s: bad unit %d\n", __func__, unit);
+ goto already;
+ }
+
+ dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
+ sm->unit_power[unit], to);
+
+ if (to == 0 && sm->unit_power[unit] == 0) {
+ dev_err(sm->dev, "unit %d is already shutdown\n", unit);
+ goto already;
+ }
+
+ sm->unit_power[unit] += to ? 1 : -1;
+ to = sm->unit_power[unit] ? 1 : 0;
+
+ if (to) {
+ if (gate & (1 << unit))
+ goto already;
+ gate |= (1 << unit);
+ } else {
+ if (!(gate & (1 << unit)))
+ goto already;
+ gate &= ~(1 << unit);
+ }
+
+ switch (mode) {
+ case 1:
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+ mode = 0;
+ break;
+ case 2:
+ case 0:
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+ mode = 1;
+ break;
+
+ default:
+ gate = -1;
+ goto already;
+ }
+
+ smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+ sm501_sync_regs(sm);
+
+ dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
+ gate, clock, mode);
+
+ sm501_mdelay(sm, 16);
+
+ already:
+ mutex_unlock(&sm->clock_lock);
+ return gate;
+}
+
+EXPORT_SYMBOL_GPL(sm501_unit_power);
+
+/* clock value structure. */
+struct sm501_clock {
+ unsigned long mclk;
+ int divider;
+ int shift;
+ unsigned int m, n, k;
+};
+
+/* sm501_calc_clock
+ *
+ * Calculates the nearest discrete clock frequency that
+ * can be achieved with the specified input clock.
+ * the maximum divisor is 3 or 5
+ */
+
+static int sm501_calc_clock(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div,
+ unsigned long mclk,
+ long *best_diff)
+{
+ int ret = 0;
+ int divider;
+ int shift;
+ long diff;
+
+ /* try dividers 1 and 3 for CRT and for panel,
+ try divider 5 for panel only.*/
+
+ for (divider = 1; divider <= max_div; divider += 2) {
+ /* try all 8 shift values.*/
+ for (shift = 0; shift < 8; shift++) {
+ /* Calculate difference to requested clock */
+ diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq;
+ if (diff < 0)
+ diff = -diff;
+
+ /* If it is less than the current, use it */
+ if (diff < *best_diff) {
+ *best_diff = diff;
+
+ clock->mclk = mclk;
+ clock->divider = divider;
+ clock->shift = shift;
+ ret = 1;
+ }
+ }
+ }
+
+ return ret;
+}
+
+/* sm501_calc_pll
+ *
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the programmable PLL.
+ * the maximum divisor is 3 or 5
+ */
+
+static unsigned long sm501_calc_pll(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div)
+{
+ unsigned long mclk;
+ unsigned int m, n, k;
+ long best_diff = 999999999;
+
+ /*
+ * The SM502 datasheet doesn't specify the min/max values for M and N.
+ * N = 1 at least doesn't work in practice.
+ */
+ for (m = 2; m <= 255; m++) {
+ for (n = 2; n <= 127; n++) {
+ for (k = 0; k <= 1; k++) {
+ mclk = (24000000UL * m / n) >> k;
+
+ if (sm501_calc_clock(freq, clock, max_div,
+ mclk, &best_diff)) {
+ clock->m = m;
+ clock->n = n;
+ clock->k = k;
+ }
+ }
+ }
+ }
+
+ /* Return best clock. */
+ return clock->mclk / (clock->divider << clock->shift);
+}
+
+/* sm501_select_clock
+ *
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the 288MHz and 336MHz PLLs.
+ * the maximum divisor is 3 or 5
+ */
+
+static unsigned long sm501_select_clock(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div)
+{
+ unsigned long mclk;
+ long best_diff = 999999999;
+
+ /* Try 288MHz and 336MHz clocks. */
+ for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
+ sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
+ }
+
+ /* Return best clock. */
+ return clock->mclk / (clock->divider << clock->shift);
+}
+
+/* sm501_set_clock
+ *
+ * set one of the four clock sources to the closest available frequency to
+ * the one specified
+*/
+
+unsigned long sm501_set_clock(struct device *dev,
+ int clksrc,
+ unsigned long req_freq)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+ unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+ unsigned int pll_reg = 0;
+ unsigned long sm501_freq; /* the actual frequency achieved */
+ u64 reg;
+
+ struct sm501_clock to;
+
+ /* find achivable discrete frequency and setup register value
+ * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
+ * has an extra bit for the divider */
+
+ switch (clksrc) {
+ case SM501_CLOCK_P2XCLK:
+ /* This clock is divided in half so to achieve the
+ * requested frequency the value must be multiplied by
+ * 2. This clock also has an additional pre divisor */
+
+ if (sm->rev >= 0xC0) {
+ /* SM502 -> use the programmable PLL */
+ sm501_freq = (sm501_calc_pll(2 * req_freq,
+ &to, 5) / 2);
+ reg = to.shift & 0x07;/* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ else if (to.divider == 5)
+ reg |= 0x10; /* /5 divider required */
+ reg |= 0x40; /* select the programmable PLL */
+ pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
+ } else {
+ sm501_freq = (sm501_select_clock(2 * req_freq,
+ &to, 5) / 2);
+ reg = to.shift & 0x07;/* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ else if (to.divider == 5)
+ reg |= 0x10; /* /5 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x20; /* which mclk pll is source */
+ }
+ break;
+
+ case SM501_CLOCK_V2XCLK:
+ /* This clock is divided in half so to achieve the
+ * requested frequency the value must be multiplied by 2. */
+
+ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
+ reg=to.shift & 0x07; /* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x10; /* which mclk pll is source */
+ break;
+
+ case SM501_CLOCK_MCLK:
+ case SM501_CLOCK_M1XCLK:
+ /* These clocks are the same and not further divided */
+
+ sm501_freq = sm501_select_clock( req_freq, &to, 3);
+ reg=to.shift & 0x07; /* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x10; /* which mclk pll is source */
+ break;
+
+ default:
+ return 0; /* this is bad */
+ }
+
+ mutex_lock(&sm->clock_lock);
+
+ mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+ clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+
+ clock = clock & ~(0xFF << clksrc);
+ clock |= reg<<clksrc;
+
+ mode &= 3; /* find current mode */
+
+ switch (mode) {
+ case 1:
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+ mode = 0;
+ break;
+ case 2:
+ case 0:
+ smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+ smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+ mode = 1;
+ break;
+
+ default:
+ mutex_unlock(&sm->clock_lock);
+ return -1;
+ }
+
+ smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+
+ if (pll_reg)
+ smc501_writel(pll_reg,
+ sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
+
+ sm501_sync_regs(sm);
+
+ dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
+ gate, clock, mode);
+
+ sm501_mdelay(sm, 16);
+ mutex_unlock(&sm->clock_lock);
+
+ sm501_dump_clk(sm);
+
+ return sm501_freq;
+}
+
+EXPORT_SYMBOL_GPL(sm501_set_clock);
+
+/* sm501_find_clock
+ *
+ * finds the closest available frequency for a given clock
+*/
+
+unsigned long sm501_find_clock(struct device *dev,
+ int clksrc,
+ unsigned long req_freq)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long sm501_freq; /* the frequency achieveable by the 501 */
+ struct sm501_clock to;
+
+ switch (clksrc) {
+ case SM501_CLOCK_P2XCLK:
+ if (sm->rev >= 0xC0) {
+ /* SM502 -> use the programmable PLL */
+ sm501_freq = (sm501_calc_pll(2 * req_freq,
+ &to, 5) / 2);
+ } else {
+ sm501_freq = (sm501_select_clock(2 * req_freq,
+ &to, 5) / 2);
+ }
+ break;
+
+ case SM501_CLOCK_V2XCLK:
+ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
+ break;
+
+ case SM501_CLOCK_MCLK:
+ case SM501_CLOCK_M1XCLK:
+ sm501_freq = sm501_select_clock(req_freq, &to, 3);
+ break;
+
+ default:
+ sm501_freq = 0; /* error */
+ }
+
+ return sm501_freq;
+}
+
+EXPORT_SYMBOL_GPL(sm501_find_clock);
+
+static struct sm501_device *to_sm_device(struct platform_device *pdev)
+{
+ return container_of(pdev, struct sm501_device, pdev);
+}
+
+/* sm501_device_release
+ *
+ * A release function for the platform devices we create to allow us to
+ * free any items we allocated
+*/
+
+static void sm501_device_release(struct device *dev)
+{
+ kfree(to_sm_device(to_platform_device(dev)));
+}
+
+/* sm501_create_subdev
+ *
+ * Create a skeleton platform device with resources for passing to a
+ * sub-driver
+*/
+
+static struct platform_device *
+sm501_create_subdev(struct sm501_devdata *sm, char *name,
+ unsigned int res_count, unsigned int platform_data_size)
+{
+ struct sm501_device *smdev;
+
+ smdev = kzalloc(sizeof(struct sm501_device) +
+ (sizeof(struct resource) * res_count) +
+ platform_data_size, GFP_KERNEL);
+ if (!smdev)
+ return NULL;
+
+ smdev->pdev.dev.release = sm501_device_release;
+
+ smdev->pdev.name = name;
+ smdev->pdev.id = sm->pdev_id;
+ smdev->pdev.dev.parent = sm->dev;
+ smdev->pdev.dev.coherent_dma_mask = 0xffffffff;
+
+ if (res_count) {
+ smdev->pdev.resource = (struct resource *)(smdev+1);
+ smdev->pdev.num_resources = res_count;
+ }
+ if (platform_data_size)
+ smdev->pdev.dev.platform_data = (void *)(smdev+1);
+
+ return &smdev->pdev;
+}
+
+/* sm501_register_device
+ *
+ * Register a platform device created with sm501_create_subdev()
+*/
+
+static int sm501_register_device(struct sm501_devdata *sm,
+ struct platform_device *pdev)
+{
+ struct sm501_device *smdev = to_sm_device(pdev);
+ int ptr;
+ int ret;
+
+ for (ptr = 0; ptr < pdev->num_resources; ptr++) {
+ printk(KERN_DEBUG "%s[%d] %pR\n",
+ pdev->name, ptr, &pdev->resource[ptr]);
+ }
+
+ ret = platform_device_register(pdev);
+
+ if (ret >= 0) {
+ dev_dbg(sm->dev, "registered %s\n", pdev->name);
+ list_add_tail(&smdev->list, &sm->devices);
+ } else
+ dev_err(sm->dev, "error registering %s (%d)\n",
+ pdev->name, ret);
+
+ return ret;
+}
+
+/* sm501_create_subio
+ *
+ * Fill in an IO resource for a sub device
+*/
+
+static void sm501_create_subio(struct sm501_devdata *sm,
+ struct resource *res,
+ resource_size_t offs,
+ resource_size_t size)
+{
+ res->flags = IORESOURCE_MEM;
+ res->parent = sm->io_res;
+ res->start = sm->io_res->start + offs;
+ res->end = res->start + size - 1;
+}
+
+/* sm501_create_mem
+ *
+ * Fill in an MEM resource for a sub device
+*/
+
+static void sm501_create_mem(struct sm501_devdata *sm,
+ struct resource *res,
+ resource_size_t *offs,
+ resource_size_t size)
+{
+ *offs -= size; /* adjust memory size */
+
+ res->flags = IORESOURCE_MEM;
+ res->parent = sm->mem_res;
+ res->start = sm->mem_res->start + *offs;
+ res->end = res->start + size - 1;
+}
+
+/* sm501_create_irq
+ *
+ * Fill in an IRQ resource for a sub device
+*/
+
+static void sm501_create_irq(struct sm501_devdata *sm,
+ struct resource *res)
+{
+ res->flags = IORESOURCE_IRQ;
+ res->parent = NULL;
+ res->start = res->end = sm->irq;
+}
+
+static int sm501_register_usbhost(struct sm501_devdata *sm,
+ resource_size_t *mem_avail)
+{
+ struct platform_device *pdev;
+
+ pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
+ if (!pdev)
+ return -ENOMEM;
+
+ sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
+ sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
+ sm501_create_irq(sm, &pdev->resource[2]);
+
+ return sm501_register_device(sm, pdev);
+}
+
+static void sm501_setup_uart_data(struct sm501_devdata *sm,
+ struct plat_serial8250_port *uart_data,
+ unsigned int offset)
+{
+ uart_data->membase = sm->regs + offset;
+ uart_data->mapbase = sm->io_res->start + offset;
+ uart_data->iotype = UPIO_MEM;
+ uart_data->irq = sm->irq;
+ uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ uart_data->regshift = 2;
+ uart_data->uartclk = (9600 * 16);
+}
+
+static int sm501_register_uart(struct sm501_devdata *sm, int devices)
+{
+ struct platform_device *pdev;
+ struct plat_serial8250_port *uart_data;
+
+ pdev = sm501_create_subdev(sm, "serial8250", 0,
+ sizeof(struct plat_serial8250_port) * 3);
+ if (!pdev)
+ return -ENOMEM;
+
+ uart_data = dev_get_platdata(&pdev->dev);
+
+ if (devices & SM501_USE_UART0) {
+ sm501_setup_uart_data(sm, uart_data++, 0x30000);
+ sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
+ sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
+ sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
+ }
+ if (devices & SM501_USE_UART1) {
+ sm501_setup_uart_data(sm, uart_data++, 0x30020);
+ sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
+ sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
+ sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
+ }
+
+ pdev->id = PLAT8250_DEV_SM501;
+
+ return sm501_register_device(sm, pdev);
+}
+
+static int sm501_register_display(struct sm501_devdata *sm,
+ resource_size_t *mem_avail)
+{
+ struct platform_device *pdev;
+
+ pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
+ if (!pdev)
+ return -ENOMEM;
+
+ sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
+ sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
+ sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
+ sm501_create_irq(sm, &pdev->resource[3]);
+
+ return sm501_register_device(sm, pdev);
+}
+
+#ifdef CONFIG_MFD_SM501_GPIO
+
+static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
+{
+ return container_of(gpio, struct sm501_devdata, gpio);
+}
+
+static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
+
+{
+ struct sm501_gpio_chip *smgpio = gpiochip_get_data(chip);
+ unsigned long result;
+
+ result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
+ result >>= offset;
+
+ return result & 1UL;
+}
+
+static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
+ unsigned long bit)
+{
+ unsigned long ctrl;
+
+ /* check and modify if this pin is not set as gpio. */
+
+ if (smc501_readl(smchip->control) & bit) {
+ dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
+ "changing mode of gpio, bit %08lx\n", bit);
+
+ ctrl = smc501_readl(smchip->control);
+ ctrl &= ~bit;
+ smc501_writel(ctrl, smchip->control);
+
+ sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
+ }
+}
+
+static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+
+{
+ struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
+ struct sm501_gpio *smgpio = smchip->ourgpio;
+ unsigned long bit = 1 << offset;
+ void __iomem *regs = smchip->regbase;
+ unsigned long save;
+ unsigned long val;
+
+ dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+ __func__, chip, offset);
+
+ spin_lock_irqsave(&smgpio->lock, save);
+
+ val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
+ if (value)
+ val |= bit;
+ smc501_writel(val, regs);
+
+ sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+ sm501_gpio_ensure_gpio(smchip, bit);
+
+ spin_unlock_irqrestore(&smgpio->lock, save);
+}
+
+static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
+ struct sm501_gpio *smgpio = smchip->ourgpio;
+ void __iomem *regs = smchip->regbase;
+ unsigned long bit = 1 << offset;
+ unsigned long save;
+ unsigned long ddr;
+
+ dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+ __func__, chip, offset);
+
+ spin_lock_irqsave(&smgpio->lock, save);
+
+ ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
+ smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
+
+ sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+ sm501_gpio_ensure_gpio(smchip, bit);
+
+ spin_unlock_irqrestore(&smgpio->lock, save);
+
+ return 0;
+}
+
+static int sm501_gpio_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
+ struct sm501_gpio *smgpio = smchip->ourgpio;
+ unsigned long bit = 1 << offset;
+ void __iomem *regs = smchip->regbase;
+ unsigned long save;
+ unsigned long val;
+ unsigned long ddr;
+
+ dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
+ __func__, chip, offset, value);
+
+ spin_lock_irqsave(&smgpio->lock, save);
+
+ val = smc501_readl(regs + SM501_GPIO_DATA_LOW);
+ if (value)
+ val |= bit;
+ else
+ val &= ~bit;
+ smc501_writel(val, regs);
+
+ ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
+ smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
+
+ sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+ smc501_writel(val, regs + SM501_GPIO_DATA_LOW);
+
+ sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+ spin_unlock_irqrestore(&smgpio->lock, save);
+
+ return 0;
+}
+
+static const struct gpio_chip gpio_chip_template = {
+ .ngpio = 32,
+ .direction_input = sm501_gpio_input,
+ .direction_output = sm501_gpio_output,
+ .set = sm501_gpio_set,
+ .get = sm501_gpio_get,
+};
+
+static int sm501_gpio_register_chip(struct sm501_devdata *sm,
+ struct sm501_gpio *gpio,
+ struct sm501_gpio_chip *chip)
+{
+ struct sm501_platdata *pdata = sm->platdata;
+ struct gpio_chip *gchip = &chip->gpio;
+ int base = pdata->gpio_base;
+
+ chip->gpio = gpio_chip_template;
+
+ if (chip == &gpio->high) {
+ if (base > 0)
+ base += 32;
+ chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
+ chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
+ gchip->label = "SM501-HIGH";
+ } else {
+ chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
+ chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
+ gchip->label = "SM501-LOW";
+ }
+
+ gchip->base = base;
+ chip->ourgpio = gpio;
+
+ return gpiochip_add_data(gchip, chip);
+}
+
+static int sm501_register_gpio(struct sm501_devdata *sm)
+{
+ struct sm501_gpio *gpio = &sm->gpio;
+ resource_size_t iobase = sm->io_res->start + SM501_GPIO;
+ int ret;
+
+ dev_dbg(sm->dev, "registering gpio block %08llx\n",
+ (unsigned long long)iobase);
+
+ spin_lock_init(&gpio->lock);
+
+ gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
+ if (!gpio->regs_res) {
+ dev_err(sm->dev, "gpio: failed to request region\n");
+ return -ENXIO;
+ }
+
+ gpio->regs = ioremap(iobase, 0x20);
+ if (!gpio->regs) {
+ dev_err(sm->dev, "gpio: failed to remap registers\n");
+ ret = -ENXIO;
+ goto err_claimed;
+ }
+
+ /* Register both our chips. */
+
+ ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
+ if (ret) {
+ dev_err(sm->dev, "failed to add low chip\n");
+ goto err_mapped;
+ }
+
+ ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
+ if (ret) {
+ dev_err(sm->dev, "failed to add high chip\n");
+ goto err_low_chip;
+ }
+
+ gpio->registered = 1;
+
+ return 0;
+
+ err_low_chip:
+ gpiochip_remove(&gpio->low.gpio);
+
+ err_mapped:
+ iounmap(gpio->regs);
+
+ err_claimed:
+ release_mem_region(iobase, 0x20);
+
+ return ret;
+}
+
+static void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+ struct sm501_gpio *gpio = &sm->gpio;
+ resource_size_t iobase = sm->io_res->start + SM501_GPIO;
+
+ if (!sm->gpio.registered)
+ return;
+
+ gpiochip_remove(&gpio->low.gpio);
+ gpiochip_remove(&gpio->high.gpio);
+
+ iounmap(gpio->regs);
+ release_mem_region(iobase, 0x20);
+}
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+ return sm->gpio.registered;
+}
+#else
+static inline int sm501_register_gpio(struct sm501_devdata *sm)
+{
+ return 0;
+}
+
+static inline void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+}
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+ return 0;
+}
+#endif
+
+static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
+ struct sm501_platdata_gpio_i2c *iic)
+{
+ struct i2c_gpio_platform_data *icd;
+ struct platform_device *pdev;
+ struct gpiod_lookup_table *lookup;
+
+ pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
+ sizeof(struct i2c_gpio_platform_data));
+ if (!pdev)
+ return -ENOMEM;
+
+ /* Create a gpiod lookup using gpiochip-local offsets */
+ lookup = devm_kzalloc(&pdev->dev, struct_size(lookup, table, 3),
+ GFP_KERNEL);
+ if (!lookup)
+ return -ENOMEM;
+
+ lookup->dev_id = "i2c-gpio";
+ lookup->table[0] = (struct gpiod_lookup)
+ GPIO_LOOKUP_IDX(iic->pin_sda < 32 ? "SM501-LOW" : "SM501-HIGH",
+ iic->pin_sda % 32, NULL, 0,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN);
+ lookup->table[1] = (struct gpiod_lookup)
+ GPIO_LOOKUP_IDX(iic->pin_scl < 32 ? "SM501-LOW" : "SM501-HIGH",
+ iic->pin_scl % 32, NULL, 1,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN);
+ gpiod_add_lookup_table(lookup);
+
+ icd = dev_get_platdata(&pdev->dev);
+ icd->timeout = iic->timeout;
+ icd->udelay = iic->udelay;
+
+ /* note, we can't use either of the pin numbers, as the i2c-gpio
+ * driver uses the platform.id field to generate the bus number
+ * to register with the i2c core; The i2c core doesn't have enough
+ * entries to deal with anything we currently use.
+ */
+
+ pdev->id = iic->bus_num;
+
+ dev_info(sm->dev, "registering i2c-%d: sda=%d, scl=%d\n",
+ iic->bus_num,
+ iic->pin_sda, iic->pin_scl);
+
+ return sm501_register_device(sm, pdev);
+}
+
+static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
+ struct sm501_platdata *pdata)
+{
+ struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
+ int index;
+ int ret;
+
+ for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
+ ret = sm501_register_gpio_i2c_instance(sm, iic);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* dbg_regs_show
+ *
+ * Debug attribute to attach to parent device to show core registers
+*/
+
+static ssize_t dbg_regs_show(struct device *dev,
+ struct device_attribute *attr, char *buff)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev) ;
+ unsigned int reg;
+ char *ptr = buff;
+ int ret;
+
+ for (reg = 0x00; reg < 0x70; reg += 4) {
+ ret = sprintf(ptr, "%08x = %08x\n",
+ reg, smc501_readl(sm->regs + reg));
+ ptr += ret;
+ }
+
+ return ptr - buff;
+}
+
+
+static DEVICE_ATTR_RO(dbg_regs);
+
+/* sm501_init_reg
+ *
+ * Helper function for the init code to setup a register
+ *
+ * clear the bits which are set in r->mask, and then set
+ * the bits set in r->set.
+*/
+
+static inline void sm501_init_reg(struct sm501_devdata *sm,
+ unsigned long reg,
+ struct sm501_reg_init *r)
+{
+ unsigned long tmp;
+
+ tmp = smc501_readl(sm->regs + reg);
+ tmp &= ~r->mask;
+ tmp |= r->set;
+ smc501_writel(tmp, sm->regs + reg);
+}
+
+/* sm501_init_regs
+ *
+ * Setup core register values
+*/
+
+static void sm501_init_regs(struct sm501_devdata *sm,
+ struct sm501_initdata *init)
+{
+ sm501_misc_control(sm->dev,
+ init->misc_control.set,
+ init->misc_control.mask);
+
+ sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
+ sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
+ sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
+
+ if (init->m1xclk) {
+ dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
+ sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
+ }
+
+ if (init->mclk) {
+ dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
+ sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
+ }
+
+}
+
+/* Check the PLL sources for the M1CLK and M1XCLK
+ *
+ * If the M1CLK and M1XCLKs are not sourced from the same PLL, then
+ * there is a risk (see errata AB-5) that the SM501 will cease proper
+ * function. If this happens, then it is likely the SM501 will
+ * hang the system.
+*/
+
+static int sm501_check_clocks(struct sm501_devdata *sm)
+{
+ unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+ unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
+ unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
+
+ return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
+}
+
+static unsigned int sm501_mem_local[] = {
+ [0] = 4*1024*1024,
+ [1] = 8*1024*1024,
+ [2] = 16*1024*1024,
+ [3] = 32*1024*1024,
+ [4] = 64*1024*1024,
+ [5] = 2*1024*1024,
+};
+
+/* sm501_init_dev
+ *
+ * Common init code for an SM501
+*/
+
+static int sm501_init_dev(struct sm501_devdata *sm)
+{
+ struct sm501_initdata *idata;
+ struct sm501_platdata *pdata;
+ resource_size_t mem_avail;
+ unsigned long dramctrl;
+ unsigned long devid;
+ int ret;
+
+ mutex_init(&sm->clock_lock);
+ spin_lock_init(&sm->reg_lock);
+
+ INIT_LIST_HEAD(&sm->devices);
+
+ devid = smc501_readl(sm->regs + SM501_DEVICEID);
+
+ if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
+ dev_err(sm->dev, "incorrect device id %08lx\n", devid);
+ return -EINVAL;
+ }
+
+ /* disable irqs */
+ smc501_writel(0, sm->regs + SM501_IRQ_MASK);
+
+ dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL);
+ mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
+
+ dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
+ sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
+
+ sm->rev = devid & SM501_DEVICEID_REVMASK;
+
+ sm501_dump_gate(sm);
+
+ ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
+ if (ret)
+ dev_err(sm->dev, "failed to create debug regs file\n");
+
+ sm501_dump_clk(sm);
+
+ /* check to see if we have some device initialisation */
+
+ pdata = sm->platdata;
+ idata = pdata ? pdata->init : NULL;
+
+ if (idata) {
+ sm501_init_regs(sm, idata);
+
+ if (idata->devices & SM501_USE_USB_HOST)
+ sm501_register_usbhost(sm, &mem_avail);
+ if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
+ sm501_register_uart(sm, idata->devices);
+ if (idata->devices & SM501_USE_GPIO)
+ sm501_register_gpio(sm);
+ }
+
+ if (pdata && pdata->gpio_i2c && pdata->gpio_i2c_nr > 0) {
+ if (!sm501_gpio_isregistered(sm))
+ dev_err(sm->dev, "no gpio available for i2c gpio.\n");
+ else
+ sm501_register_gpio_i2c(sm, pdata);
+ }
+
+ ret = sm501_check_clocks(sm);
+ if (ret) {
+ dev_err(sm->dev, "M1X and M clocks sourced from different "
+ "PLLs\n");
+ return -EINVAL;
+ }
+
+ /* always create a framebuffer */
+ sm501_register_display(sm, &mem_avail);
+
+ return 0;
+}
+
+static int sm501_plat_probe(struct platform_device *dev)
+{
+ struct sm501_devdata *sm;
+ int ret;
+
+ sm = kzalloc(sizeof(*sm), GFP_KERNEL);
+ if (!sm) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ sm->dev = &dev->dev;
+ sm->pdev_id = dev->id;
+ sm->platdata = dev_get_platdata(&dev->dev);
+
+ ret = platform_get_irq(dev, 0);
+ if (ret < 0)
+ goto err_res;
+ sm->irq = ret;
+
+ sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!sm->io_res || !sm->mem_res) {
+ dev_err(&dev->dev, "failed to get IO resource\n");
+ ret = -ENOENT;
+ goto err_res;
+ }
+
+ sm->regs_claim = request_mem_region(sm->io_res->start,
+ 0x100, "sm501");
+ if (!sm->regs_claim) {
+ dev_err(&dev->dev, "cannot claim registers\n");
+ ret = -EBUSY;
+ goto err_res;
+ }
+
+ platform_set_drvdata(dev, sm);
+
+ sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
+ if (!sm->regs) {
+ dev_err(&dev->dev, "cannot remap registers\n");
+ ret = -EIO;
+ goto err_claim;
+ }
+
+ ret = sm501_init_dev(sm);
+ if (ret)
+ goto err_unmap;
+
+ return 0;
+
+ err_unmap:
+ iounmap(sm->regs);
+ err_claim:
+ release_mem_region(sm->io_res->start, 0x100);
+ err_res:
+ kfree(sm);
+ err1:
+ return ret;
+
+}
+
+#ifdef CONFIG_PM
+
+/* power management support */
+
+static void sm501_set_power(struct sm501_devdata *sm, int on)
+{
+ struct sm501_platdata *pd = sm->platdata;
+
+ if (!pd)
+ return;
+
+ if (pd->get_power) {
+ if (pd->get_power(sm->dev) == on) {
+ dev_dbg(sm->dev, "is already %d\n", on);
+ return;
+ }
+ }
+
+ if (pd->set_power) {
+ dev_dbg(sm->dev, "setting power to %d\n", on);
+
+ pd->set_power(sm->dev, on);
+ sm501_mdelay(sm, 10);
+ }
+}
+
+static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct sm501_devdata *sm = platform_get_drvdata(pdev);
+
+ sm->in_suspend = 1;
+ sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
+
+ sm501_dump_regs(sm);
+
+ if (sm->platdata) {
+ if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
+ sm501_set_power(sm, 0);
+ }
+
+ return 0;
+}
+
+static int sm501_plat_resume(struct platform_device *pdev)
+{
+ struct sm501_devdata *sm = platform_get_drvdata(pdev);
+
+ sm501_set_power(sm, 1);
+
+ sm501_dump_regs(sm);
+ sm501_dump_gate(sm);
+ sm501_dump_clk(sm);
+
+ /* check to see if we are in the same state as when suspended */
+
+ if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
+ dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
+ smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
+
+ /* our suspend causes the controller state to change,
+ * either by something attempting setup, power loss,
+ * or an external reset event on power change */
+
+ if (sm->platdata && sm->platdata->init) {
+ sm501_init_regs(sm, sm->platdata->init);
+ }
+ }
+
+ /* dump our state from resume */
+
+ sm501_dump_regs(sm);
+ sm501_dump_clk(sm);
+
+ sm->in_suspend = 0;
+
+ return 0;
+}
+#else
+#define sm501_plat_suspend NULL
+#define sm501_plat_resume NULL
+#endif
+
+/* Initialisation data for PCI devices */
+
+static struct sm501_initdata sm501_pci_initdata = {
+ .gpio_high = {
+ .set = 0x3F000000, /* 24bit panel */
+ .mask = 0x0,
+ },
+ .misc_timing = {
+ .set = 0x010100, /* SDRAM timing */
+ .mask = 0x1F1F00,
+ },
+ .misc_control = {
+ .set = SM501_MISC_PNL_24BIT,
+ .mask = 0,
+ },
+
+ .devices = SM501_USE_ALL,
+
+ /* Errata AB-3 says that 72MHz is the fastest available
+ * for 33MHZ PCI with proper bus-mastering operation */
+
+ .mclk = 72 * MHZ,
+ .m1xclk = 144 * MHZ,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
+ .flags = (SM501FB_FLAG_USE_INIT_MODE |
+ SM501FB_FLAG_USE_HWCURSOR |
+ SM501FB_FLAG_USE_HWACCEL |
+ SM501FB_FLAG_DISABLE_AT_EXIT),
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+ .fb_route = SM501_FB_OWN,
+ .fb_crt = &sm501_pdata_fbsub,
+ .fb_pnl = &sm501_pdata_fbsub,
+};
+
+static struct sm501_platdata sm501_pci_platdata = {
+ .init = &sm501_pci_initdata,
+ .fb = &sm501_fb_pdata,
+ .gpio_base = -1,
+};
+
+static int sm501_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct sm501_devdata *sm;
+ int err;
+
+ sm = kzalloc(sizeof(*sm), GFP_KERNEL);
+ if (!sm) {
+ err = -ENOMEM;
+ goto err1;
+ }
+
+ /* set a default set of platform data */
+ dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
+
+ /* set a hopefully unique id for our child platform devices */
+ sm->pdev_id = 32 + dev->devfn;
+
+ pci_set_drvdata(dev, sm);
+
+ err = pci_enable_device(dev);
+ if (err) {
+ dev_err(&dev->dev, "cannot enable device\n");
+ goto err2;
+ }
+
+ sm->dev = &dev->dev;
+ sm->irq = dev->irq;
+
+#ifdef __BIG_ENDIAN
+ /* if the system is big-endian, we most probably have a
+ * translation in the IO layer making the PCI bus little endian
+ * so make the framebuffer swapped pixels */
+
+ sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
+#endif
+
+ /* check our resources */
+
+ if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
+ dev_err(&dev->dev, "region #0 is not memory?\n");
+ err = -EINVAL;
+ goto err3;
+ }
+
+ if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
+ dev_err(&dev->dev, "region #1 is not memory?\n");
+ err = -EINVAL;
+ goto err3;
+ }
+
+ /* make our resources ready for sharing */
+
+ sm->io_res = &dev->resource[1];
+ sm->mem_res = &dev->resource[0];
+
+ sm->regs_claim = request_mem_region(sm->io_res->start,
+ 0x100, "sm501");
+ if (!sm->regs_claim) {
+ dev_err(&dev->dev, "cannot claim registers\n");
+ err= -EBUSY;
+ goto err3;
+ }
+
+ sm->regs = pci_ioremap_bar(dev, 1);
+ if (!sm->regs) {
+ dev_err(&dev->dev, "cannot remap registers\n");
+ err = -EIO;
+ goto err4;
+ }
+
+ sm501_init_dev(sm);
+ return 0;
+
+ err4:
+ release_mem_region(sm->io_res->start, 0x100);
+ err3:
+ pci_disable_device(dev);
+ err2:
+ kfree(sm);
+ err1:
+ return err;
+}
+
+static void sm501_remove_sub(struct sm501_devdata *sm,
+ struct sm501_device *smdev)
+{
+ list_del(&smdev->list);
+ platform_device_unregister(&smdev->pdev);
+}
+
+static void sm501_dev_remove(struct sm501_devdata *sm)
+{
+ struct sm501_device *smdev, *tmp;
+
+ list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
+ sm501_remove_sub(sm, smdev);
+
+ device_remove_file(sm->dev, &dev_attr_dbg_regs);
+
+ sm501_gpio_remove(sm);
+}
+
+static void sm501_pci_remove(struct pci_dev *dev)
+{
+ struct sm501_devdata *sm = pci_get_drvdata(dev);
+
+ sm501_dev_remove(sm);
+ iounmap(sm->regs);
+
+ release_mem_region(sm->io_res->start, 0x100);
+
+ pci_disable_device(dev);
+}
+
+static int sm501_plat_remove(struct platform_device *dev)
+{
+ struct sm501_devdata *sm = platform_get_drvdata(dev);
+
+ sm501_dev_remove(sm);
+ iounmap(sm->regs);
+
+ release_mem_region(sm->io_res->start, 0x100);
+
+ return 0;
+}
+
+static const struct pci_device_id sm501_pci_tbl[] = {
+ { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
+
+static struct pci_driver sm501_pci_driver = {
+ .name = "sm501",
+ .id_table = sm501_pci_tbl,
+ .probe = sm501_pci_probe,
+ .remove = sm501_pci_remove,
+};
+
+MODULE_ALIAS("platform:sm501");
+
+static const struct of_device_id of_sm501_match_tbl[] = {
+ { .compatible = "smi,sm501", },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_sm501_match_tbl);
+
+static struct platform_driver sm501_plat_driver = {
+ .driver = {
+ .name = "sm501",
+ .of_match_table = of_sm501_match_tbl,
+ },
+ .probe = sm501_plat_probe,
+ .remove = sm501_plat_remove,
+ .suspend = sm501_plat_suspend,
+ .resume = sm501_plat_resume,
+};
+
+static int __init sm501_base_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&sm501_plat_driver);
+ if (ret < 0)
+ return ret;
+
+ return pci_register_driver(&sm501_pci_driver);
+}
+
+static void __exit sm501_base_exit(void)
+{
+ platform_driver_unregister(&sm501_plat_driver);
+ pci_unregister_driver(&sm501_pci_driver);
+}
+
+module_init(sm501_base_init);
+module_exit(sm501_base_exit);
+
+MODULE_DESCRIPTION("SM501 Core Driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
+MODULE_LICENSE("GPL v2");