diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/mfd/stmpe.c | 1523 |
1 files changed, 1523 insertions, 0 deletions
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c new file mode 100644 index 000000000..aef29221d --- /dev/null +++ b/drivers/mfd/stmpe.c @@ -0,0 +1,1523 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ST Microelectronics MFD: stmpe's driver + * + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/mfd/core.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> +#include "stmpe.h" + +/** + * struct stmpe_platform_data - STMPE platform data + * @id: device id to distinguish between multiple STMPEs on the same board + * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) + * @irq_trigger: IRQ trigger to use for the interrupt to the host + * @autosleep: bool to enable/disable stmpe autosleep + * @autosleep_timeout: inactivity timeout in milliseconds for autosleep + */ +struct stmpe_platform_data { + int id; + unsigned int blocks; + unsigned int irq_trigger; + bool autosleep; + int autosleep_timeout; +}; + +static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) +{ + return stmpe->variant->enable(stmpe, blocks, true); +} + +static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks) +{ + return stmpe->variant->enable(stmpe, blocks, false); +} + +static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg) +{ + int ret; + + ret = stmpe->ci->read_byte(stmpe, reg); + if (ret < 0) + dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret); + + dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret); + + return ret; +} + +static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) +{ + int ret; + + dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val); + + ret = stmpe->ci->write_byte(stmpe, reg, val); + if (ret < 0) + dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret); + + return ret; +} + +static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) +{ + int ret; + + ret = __stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + ret &= ~mask; + ret |= val; + + return __stmpe_reg_write(stmpe, reg, ret); +} + +static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, + u8 *values) +{ + int ret; + + ret = stmpe->ci->read_block(stmpe, reg, length, values); + if (ret < 0) + dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret); + + dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret); + stmpe_dump_bytes("stmpe rd: ", values, length); + + return ret; +} + +static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values) +{ + int ret; + + dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length); + stmpe_dump_bytes("stmpe wr: ", values, length); + + ret = stmpe->ci->write_block(stmpe, reg, length, values); + if (ret < 0) + dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret); + + return ret; +} + +/** + * stmpe_enable - enable blocks on an STMPE device + * @stmpe: Device to work on + * @blocks: Mask of blocks (enum stmpe_block values) to enable + */ +int stmpe_enable(struct stmpe *stmpe, unsigned int blocks) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_enable(stmpe, blocks); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_enable); + +/** + * stmpe_disable - disable blocks on an STMPE device + * @stmpe: Device to work on + * @blocks: Mask of blocks (enum stmpe_block values) to enable + */ +int stmpe_disable(struct stmpe *stmpe, unsigned int blocks) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_disable(stmpe, blocks); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_disable); + +/** + * stmpe_reg_read() - read a single STMPE register + * @stmpe: Device to read from + * @reg: Register to read + */ +int stmpe_reg_read(struct stmpe *stmpe, u8 reg) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_reg_read(stmpe, reg); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_reg_read); + +/** + * stmpe_reg_write() - write a single STMPE register + * @stmpe: Device to write to + * @reg: Register to write + * @val: Value to write + */ +int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_reg_write(stmpe, reg, val); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_reg_write); + +/** + * stmpe_set_bits() - set the value of a bitfield in a STMPE register + * @stmpe: Device to write to + * @reg: Register to write + * @mask: Mask of bits to set + * @val: Value to set + */ +int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_set_bits(stmpe, reg, mask, val); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_set_bits); + +/** + * stmpe_block_read() - read multiple STMPE registers + * @stmpe: Device to read from + * @reg: First register + * @length: Number of registers + * @values: Buffer to write to + */ +int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_block_read(stmpe, reg, length, values); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_block_read); + +/** + * stmpe_block_write() - write multiple STMPE registers + * @stmpe: Device to write to + * @reg: First register + * @length: Number of registers + * @values: Values to write + */ +int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_block_write(stmpe, reg, length, values); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_block_write); + +/** + * stmpe_set_altfunc()- set the alternate function for STMPE pins + * @stmpe: Device to configure + * @pins: Bitmask of pins to affect + * @block: block to enable alternate functions for + * + * @pins is assumed to have a bit set for each of the bits whose alternate + * function is to be changed, numbered according to the GPIOXY numbers. + * + * If the GPIO module is not enabled, this function automatically enables it in + * order to perform the change. + */ +int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block) +{ + struct stmpe_variant_info *variant = stmpe->variant; + u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB]; + int af_bits = variant->af_bits; + int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8); + int mask = (1 << af_bits) - 1; + u8 regs[8]; + int af, afperreg, ret; + + if (!variant->get_altfunc) + return 0; + + afperreg = 8 / af_bits; + mutex_lock(&stmpe->lock); + + ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO); + if (ret < 0) + goto out; + + ret = __stmpe_block_read(stmpe, regaddr, numregs, regs); + if (ret < 0) + goto out; + + af = variant->get_altfunc(stmpe, block); + + while (pins) { + int pin = __ffs(pins); + int regoffset = numregs - (pin / afperreg) - 1; + int pos = (pin % afperreg) * (8 / afperreg); + + regs[regoffset] &= ~(mask << pos); + regs[regoffset] |= af << pos; + + pins &= ~(1 << pin); + } + + ret = __stmpe_block_write(stmpe, regaddr, numregs, regs); + +out: + mutex_unlock(&stmpe->lock); + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_set_altfunc); + +/* + * GPIO (all variants) + */ + +static struct resource stmpe_gpio_resources[] = { + /* Start and end filled dynamically */ + { + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_gpio_cell = { + .name = "stmpe-gpio", + .of_compatible = "st,stmpe-gpio", + .resources = stmpe_gpio_resources, + .num_resources = ARRAY_SIZE(stmpe_gpio_resources), +}; + +static const struct mfd_cell stmpe_gpio_cell_noirq = { + .name = "stmpe-gpio", + .of_compatible = "st,stmpe-gpio", + /* gpio cell resources consist of an irq only so no resources here */ +}; + +/* + * Keypad (1601, 2401, 2403) + */ + +static struct resource stmpe_keypad_resources[] = { + /* Start and end filled dynamically */ + { + .name = "KEYPAD", + .flags = IORESOURCE_IRQ, + }, + { + .name = "KEYPAD_OVER", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_keypad_cell = { + .name = "stmpe-keypad", + .of_compatible = "st,stmpe-keypad", + .resources = stmpe_keypad_resources, + .num_resources = ARRAY_SIZE(stmpe_keypad_resources), +}; + +/* + * PWM (1601, 2401, 2403) + */ +static struct resource stmpe_pwm_resources[] = { + /* Start and end filled dynamically */ + { + .name = "PWM0", + .flags = IORESOURCE_IRQ, + }, + { + .name = "PWM1", + .flags = IORESOURCE_IRQ, + }, + { + .name = "PWM2", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_pwm_cell = { + .name = "stmpe-pwm", + .of_compatible = "st,stmpe-pwm", + .resources = stmpe_pwm_resources, + .num_resources = ARRAY_SIZE(stmpe_pwm_resources), +}; + +/* + * STMPE801 + */ +static const u8 stmpe801_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL, + [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA, + [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN, + [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN, + [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR, + [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN, + [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA, + +}; + +static struct stmpe_variant_block stmpe801_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = 0, + .block = STMPE_BLOCK_GPIO, + }, +}; + +static struct stmpe_variant_block stmpe801_blocks_noirq[] = { + { + .cell = &stmpe_gpio_cell_noirq, + .block = STMPE_BLOCK_GPIO, + }, +}; + +static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + if (blocks & STMPE_BLOCK_GPIO) + return 0; + else + return -EINVAL; +} + +static struct stmpe_variant_info stmpe801 = { + .name = "stmpe801", + .id_val = STMPE801_ID, + .id_mask = 0xffff, + .num_gpios = 8, + .regs = stmpe801_regs, + .blocks = stmpe801_blocks, + .num_blocks = ARRAY_SIZE(stmpe801_blocks), + .num_irqs = STMPE801_NR_INTERNAL_IRQS, + .enable = stmpe801_enable, +}; + +static struct stmpe_variant_info stmpe801_noirq = { + .name = "stmpe801", + .id_val = STMPE801_ID, + .id_mask = 0xffff, + .num_gpios = 8, + .regs = stmpe801_regs, + .blocks = stmpe801_blocks_noirq, + .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq), + .enable = stmpe801_enable, +}; + +/* + * Touchscreen (STMPE811 or STMPE610) + */ + +static struct resource stmpe_ts_resources[] = { + /* Start and end filled dynamically */ + { + .name = "TOUCH_DET", + .flags = IORESOURCE_IRQ, + }, + { + .name = "FIFO_TH", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_ts_cell = { + .name = "stmpe-ts", + .of_compatible = "st,stmpe-ts", + .resources = stmpe_ts_resources, + .num_resources = ARRAY_SIZE(stmpe_ts_resources), +}; + +/* + * ADC (STMPE811) + */ + +static struct resource stmpe_adc_resources[] = { + /* Start and end filled dynamically */ + { + .name = "STMPE_TEMP_SENS", + .flags = IORESOURCE_IRQ, + }, + { + .name = "STMPE_ADC", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_adc_cell = { + .name = "stmpe-adc", + .of_compatible = "st,stmpe-adc", + .resources = stmpe_adc_resources, + .num_resources = ARRAY_SIZE(stmpe_adc_resources), +}; + +/* + * STMPE811 or STMPE610 + */ + +static const u8 stmpe811_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID, + [STMPE_IDX_SYS_CTRL] = STMPE811_REG_SYS_CTRL, + [STMPE_IDX_SYS_CTRL2] = STMPE811_REG_SYS_CTRL2, + [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL, + [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN, + [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA, + [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA, + [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN, + [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN, + [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR, + [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE, + [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE, + [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF, + [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN, + [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA, + [STMPE_IDX_GPEDR_LSB] = STMPE811_REG_GPIO_ED, +}; + +static struct stmpe_variant_block stmpe811_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE811_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_ts_cell, + .irq = STMPE811_IRQ_TOUCH_DET, + .block = STMPE_BLOCK_TOUCHSCREEN, + }, + { + .cell = &stmpe_adc_cell, + .irq = STMPE811_IRQ_TEMP_SENS, + .block = STMPE_BLOCK_ADC, + }, +}; + +static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE811_SYS_CTRL2_GPIO_OFF; + + if (blocks & STMPE_BLOCK_ADC) + mask |= STMPE811_SYS_CTRL2_ADC_OFF; + + if (blocks & STMPE_BLOCK_TOUCHSCREEN) + mask |= STMPE811_SYS_CTRL2_TSC_OFF; + + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask, + enable ? 0 : mask); +} + +int stmpe811_adc_common_init(struct stmpe *stmpe) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask; + + adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) | + STMPE_MOD_12B(stmpe->mod_12b) | + STMPE_REF_SEL(stmpe->ref_sel); + adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) | + STMPE_REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2, + STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq)); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(stmpe811_adc_common_init); + +static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + /* 0 for touchscreen, 1 for GPIO */ + return block != STMPE_BLOCK_TOUCHSCREEN; +} + +static struct stmpe_variant_info stmpe811 = { + .name = "stmpe811", + .id_val = 0x0811, + .id_mask = 0xffff, + .num_gpios = 8, + .af_bits = 1, + .regs = stmpe811_regs, + .blocks = stmpe811_blocks, + .num_blocks = ARRAY_SIZE(stmpe811_blocks), + .num_irqs = STMPE811_NR_INTERNAL_IRQS, + .enable = stmpe811_enable, + .get_altfunc = stmpe811_get_altfunc, +}; + +/* Similar to 811, except number of gpios */ +static struct stmpe_variant_info stmpe610 = { + .name = "stmpe610", + .id_val = 0x0811, + .id_mask = 0xffff, + .num_gpios = 6, + .af_bits = 1, + .regs = stmpe811_regs, + .blocks = stmpe811_blocks, + .num_blocks = ARRAY_SIZE(stmpe811_blocks), + .num_irqs = STMPE811_NR_INTERNAL_IRQS, + .enable = stmpe811_enable, + .get_altfunc = stmpe811_get_altfunc, +}; + +/* + * STMPE1600 + * Compared to all others STMPE variant, LSB and MSB regs are located in this + * order : LSB addr + * MSB addr + 1 + * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers + */ + +static const u8 stmpe1600_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID, + [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL, + [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL, + [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB, + [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB, + [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB, + [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB, + [STMPE_IDX_GPCR_LSB] = STMPE1600_REG_GPSR_LSB, + [STMPE_IDX_GPCR_CSB] = STMPE1600_REG_GPSR_MSB, + [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB, + [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB, + [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB, + [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB, +}; + +static struct stmpe_variant_block stmpe1600_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = 0, + .block = STMPE_BLOCK_GPIO, + }, +}; + +static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + if (blocks & STMPE_BLOCK_GPIO) + return 0; + else + return -EINVAL; +} + +static struct stmpe_variant_info stmpe1600 = { + .name = "stmpe1600", + .id_val = STMPE1600_ID, + .id_mask = 0xffff, + .num_gpios = 16, + .af_bits = 0, + .regs = stmpe1600_regs, + .blocks = stmpe1600_blocks, + .num_blocks = ARRAY_SIZE(stmpe1600_blocks), + .num_irqs = STMPE1600_NR_INTERNAL_IRQS, + .enable = stmpe1600_enable, +}; + +/* + * STMPE1601 + */ + +static const u8 stmpe1601_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID, + [STMPE_IDX_SYS_CTRL] = STMPE1601_REG_SYS_CTRL, + [STMPE_IDX_SYS_CTRL2] = STMPE1601_REG_SYS_CTRL2, + [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB, + [STMPE_IDX_IER_MSB] = STMPE1601_REG_IER_MSB, + [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB, + [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB, + [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB, + [STMPE_IDX_GPMR_CSB] = STMPE1601_REG_GPIO_MP_MSB, + [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB, + [STMPE_IDX_GPSR_CSB] = STMPE1601_REG_GPIO_SET_MSB, + [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB, + [STMPE_IDX_GPCR_CSB] = STMPE1601_REG_GPIO_CLR_MSB, + [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB, + [STMPE_IDX_GPDR_CSB] = STMPE1601_REG_GPIO_SET_DIR_MSB, + [STMPE_IDX_GPEDR_LSB] = STMPE1601_REG_GPIO_ED_LSB, + [STMPE_IDX_GPEDR_CSB] = STMPE1601_REG_GPIO_ED_MSB, + [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB, + [STMPE_IDX_GPRER_CSB] = STMPE1601_REG_GPIO_RE_MSB, + [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB, + [STMPE_IDX_GPFER_CSB] = STMPE1601_REG_GPIO_FE_MSB, + [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB, + [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB, + [STMPE_IDX_IEGPIOR_CSB] = STMPE1601_REG_INT_EN_GPIO_MASK_MSB, + [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB, +}; + +static struct stmpe_variant_block stmpe1601_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE1601_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_keypad_cell, + .irq = STMPE1601_IRQ_KEYPAD, + .block = STMPE_BLOCK_KEYPAD, + }, + { + .cell = &stmpe_pwm_cell, + .irq = STMPE1601_IRQ_PWM0, + .block = STMPE_BLOCK_PWM, + }, +}; + +/* supported autosleep timeout delay (in msecs) */ +static const int stmpe_autosleep_delay[] = { + 4, 16, 32, 64, 128, 256, 512, 1024, +}; + +static int stmpe_round_timeout(int timeout) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) { + if (stmpe_autosleep_delay[i] >= timeout) + return i; + } + + /* + * requests for delays longer than supported should not return the + * longest supported delay + */ + return -EINVAL; +} + +static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout) +{ + int ret; + + if (!stmpe->variant->enable_autosleep) + return -ENOSYS; + + mutex_lock(&stmpe->lock); + ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout); + mutex_unlock(&stmpe->lock); + + return ret; +} + +/* + * Both stmpe 1601/2403 support same layout for autosleep + */ +static int stmpe1601_autosleep(struct stmpe *stmpe, + int autosleep_timeout) +{ + int ret, timeout; + + /* choose the best available timeout */ + timeout = stmpe_round_timeout(autosleep_timeout); + if (timeout < 0) { + dev_err(stmpe->dev, "invalid timeout\n"); + return timeout; + } + + ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], + STMPE1601_AUTOSLEEP_TIMEOUT_MASK, + timeout); + if (ret < 0) + return ret; + + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], + STPME1601_AUTOSLEEP_ENABLE, + STPME1601_AUTOSLEEP_ENABLE); +} + +static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO; + else + mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO; + + if (blocks & STMPE_BLOCK_KEYPAD) + mask |= STMPE1601_SYS_CTRL_ENABLE_KPC; + else + mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC; + + if (blocks & STMPE_BLOCK_PWM) + mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM; + else + mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM; + + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask, + enable ? mask : 0); +} + +static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + switch (block) { + case STMPE_BLOCK_PWM: + return 2; + + case STMPE_BLOCK_KEYPAD: + return 1; + + case STMPE_BLOCK_GPIO: + default: + return 0; + } +} + +static struct stmpe_variant_info stmpe1601 = { + .name = "stmpe1601", + .id_val = 0x0210, + .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */ + .num_gpios = 16, + .af_bits = 2, + .regs = stmpe1601_regs, + .blocks = stmpe1601_blocks, + .num_blocks = ARRAY_SIZE(stmpe1601_blocks), + .num_irqs = STMPE1601_NR_INTERNAL_IRQS, + .enable = stmpe1601_enable, + .get_altfunc = stmpe1601_get_altfunc, + .enable_autosleep = stmpe1601_autosleep, +}; + +/* + * STMPE1801 + */ +static const u8 stmpe1801_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID, + [STMPE_IDX_SYS_CTRL] = STMPE1801_REG_SYS_CTRL, + [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW, + [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW, + [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW, + [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW, + [STMPE_IDX_GPMR_CSB] = STMPE1801_REG_GPIO_MP_MID, + [STMPE_IDX_GPMR_MSB] = STMPE1801_REG_GPIO_MP_HIGH, + [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW, + [STMPE_IDX_GPSR_CSB] = STMPE1801_REG_GPIO_SET_MID, + [STMPE_IDX_GPSR_MSB] = STMPE1801_REG_GPIO_SET_HIGH, + [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW, + [STMPE_IDX_GPCR_CSB] = STMPE1801_REG_GPIO_CLR_MID, + [STMPE_IDX_GPCR_MSB] = STMPE1801_REG_GPIO_CLR_HIGH, + [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW, + [STMPE_IDX_GPDR_CSB] = STMPE1801_REG_GPIO_SET_DIR_MID, + [STMPE_IDX_GPDR_MSB] = STMPE1801_REG_GPIO_SET_DIR_HIGH, + [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW, + [STMPE_IDX_GPRER_CSB] = STMPE1801_REG_GPIO_RE_MID, + [STMPE_IDX_GPRER_MSB] = STMPE1801_REG_GPIO_RE_HIGH, + [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW, + [STMPE_IDX_GPFER_CSB] = STMPE1801_REG_GPIO_FE_MID, + [STMPE_IDX_GPFER_MSB] = STMPE1801_REG_GPIO_FE_HIGH, + [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW, + [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW, + [STMPE_IDX_IEGPIOR_CSB] = STMPE1801_REG_INT_EN_GPIO_MASK_MID, + [STMPE_IDX_IEGPIOR_MSB] = STMPE1801_REG_INT_EN_GPIO_MASK_HIGH, + [STMPE_IDX_ISGPIOR_MSB] = STMPE1801_REG_INT_STA_GPIO_HIGH, +}; + +static struct stmpe_variant_block stmpe1801_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE1801_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_keypad_cell, + .irq = STMPE1801_IRQ_KEYPAD, + .block = STMPE_BLOCK_KEYPAD, + }, +}; + +static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE1801_MSK_INT_EN_GPIO; + + if (blocks & STMPE_BLOCK_KEYPAD) + mask |= STMPE1801_MSK_INT_EN_KPC; + + return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask, + enable ? mask : 0); +} + +static int stmpe_reset(struct stmpe *stmpe) +{ + u16 id_val = stmpe->variant->id_val; + unsigned long timeout; + int ret = 0; + u8 reset_bit; + + if (id_val == STMPE811_ID) + /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */ + reset_bit = STMPE811_SYS_CTRL_RESET; + else + /* all other STMPE variant use bit 7 of SYS_CTRL register */ + reset_bit = STMPE_SYS_CTRL_RESET; + + ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], + reset_bit, reset_bit); + if (ret < 0) + return ret; + + msleep(10); + + timeout = jiffies + msecs_to_jiffies(100); + while (time_before(jiffies, timeout)) { + ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]); + if (ret < 0) + return ret; + if (!(ret & reset_bit)) + return 0; + usleep_range(100, 200); + } + return -EIO; +} + +static struct stmpe_variant_info stmpe1801 = { + .name = "stmpe1801", + .id_val = STMPE1801_ID, + .id_mask = 0xfff0, + .num_gpios = 18, + .af_bits = 0, + .regs = stmpe1801_regs, + .blocks = stmpe1801_blocks, + .num_blocks = ARRAY_SIZE(stmpe1801_blocks), + .num_irqs = STMPE1801_NR_INTERNAL_IRQS, + .enable = stmpe1801_enable, + /* stmpe1801 do not have any gpio alternate function */ + .get_altfunc = NULL, +}; + +/* + * STMPE24XX + */ + +static const u8 stmpe24xx_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID, + [STMPE_IDX_SYS_CTRL] = STMPE24XX_REG_SYS_CTRL, + [STMPE_IDX_SYS_CTRL2] = STMPE24XX_REG_SYS_CTRL2, + [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB, + [STMPE_IDX_IER_MSB] = STMPE24XX_REG_IER_MSB, + [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB, + [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB, + [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB, + [STMPE_IDX_GPMR_CSB] = STMPE24XX_REG_GPMR_CSB, + [STMPE_IDX_GPMR_MSB] = STMPE24XX_REG_GPMR_MSB, + [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB, + [STMPE_IDX_GPSR_CSB] = STMPE24XX_REG_GPSR_CSB, + [STMPE_IDX_GPSR_MSB] = STMPE24XX_REG_GPSR_MSB, + [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB, + [STMPE_IDX_GPCR_CSB] = STMPE24XX_REG_GPCR_CSB, + [STMPE_IDX_GPCR_MSB] = STMPE24XX_REG_GPCR_MSB, + [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB, + [STMPE_IDX_GPDR_CSB] = STMPE24XX_REG_GPDR_CSB, + [STMPE_IDX_GPDR_MSB] = STMPE24XX_REG_GPDR_MSB, + [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB, + [STMPE_IDX_GPRER_CSB] = STMPE24XX_REG_GPRER_CSB, + [STMPE_IDX_GPRER_MSB] = STMPE24XX_REG_GPRER_MSB, + [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB, + [STMPE_IDX_GPFER_CSB] = STMPE24XX_REG_GPFER_CSB, + [STMPE_IDX_GPFER_MSB] = STMPE24XX_REG_GPFER_MSB, + [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB, + [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB, + [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB, + [STMPE_IDX_IEGPIOR_CSB] = STMPE24XX_REG_IEGPIOR_CSB, + [STMPE_IDX_IEGPIOR_MSB] = STMPE24XX_REG_IEGPIOR_MSB, + [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB, + [STMPE_IDX_GPEDR_LSB] = STMPE24XX_REG_GPEDR_LSB, + [STMPE_IDX_GPEDR_CSB] = STMPE24XX_REG_GPEDR_CSB, + [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB, +}; + +static struct stmpe_variant_block stmpe24xx_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE24XX_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_keypad_cell, + .irq = STMPE24XX_IRQ_KEYPAD, + .block = STMPE_BLOCK_KEYPAD, + }, + { + .cell = &stmpe_pwm_cell, + .irq = STMPE24XX_IRQ_PWM0, + .block = STMPE_BLOCK_PWM, + }, +}; + +static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO; + + if (blocks & STMPE_BLOCK_KEYPAD) + mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC; + + return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask, + enable ? mask : 0); +} + +static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + switch (block) { + case STMPE_BLOCK_ROTATOR: + return 2; + + case STMPE_BLOCK_KEYPAD: + case STMPE_BLOCK_PWM: + return 1; + + case STMPE_BLOCK_GPIO: + default: + return 0; + } +} + +static struct stmpe_variant_info stmpe2401 = { + .name = "stmpe2401", + .id_val = 0x0101, + .id_mask = 0xffff, + .num_gpios = 24, + .af_bits = 2, + .regs = stmpe24xx_regs, + .blocks = stmpe24xx_blocks, + .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), + .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, + .enable = stmpe24xx_enable, + .get_altfunc = stmpe24xx_get_altfunc, +}; + +static struct stmpe_variant_info stmpe2403 = { + .name = "stmpe2403", + .id_val = 0x0120, + .id_mask = 0xffff, + .num_gpios = 24, + .af_bits = 2, + .regs = stmpe24xx_regs, + .blocks = stmpe24xx_blocks, + .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), + .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, + .enable = stmpe24xx_enable, + .get_altfunc = stmpe24xx_get_altfunc, + .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ +}; + +static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = { + [STMPE610] = &stmpe610, + [STMPE801] = &stmpe801, + [STMPE811] = &stmpe811, + [STMPE1600] = &stmpe1600, + [STMPE1601] = &stmpe1601, + [STMPE1801] = &stmpe1801, + [STMPE2401] = &stmpe2401, + [STMPE2403] = &stmpe2403, +}; + +/* + * These devices can be connected in a 'no-irq' configuration - the irq pin + * is not used and the device cannot interrupt the CPU. Here we only list + * devices which support this configuration - the driver will fail probing + * for any devices not listed here which are configured in this way. + */ +static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = { + [STMPE801] = &stmpe801_noirq, +}; + +static irqreturn_t stmpe_irq(int irq, void *data) +{ + struct stmpe *stmpe = data; + struct stmpe_variant_info *variant = stmpe->variant; + int num = DIV_ROUND_UP(variant->num_irqs, 8); + u8 israddr; + u8 isr[3]; + int ret; + int i; + + if (variant->id_val == STMPE801_ID || + variant->id_val == STMPE1600_ID) { + int base = irq_find_mapping(stmpe->domain, 0); + + handle_nested_irq(base); + return IRQ_HANDLED; + } + + if (variant->id_val == STMPE1801_ID) + israddr = stmpe->regs[STMPE_IDX_ISR_LSB]; + else + israddr = stmpe->regs[STMPE_IDX_ISR_MSB]; + + ret = stmpe_block_read(stmpe, israddr, num, isr); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < num; i++) { + int bank = num - i - 1; + u8 status = isr[i]; + u8 clear; + + status &= stmpe->ier[bank]; + if (!status) + continue; + + clear = status; + while (status) { + int bit = __ffs(status); + int line = bank * 8 + bit; + int nestedirq = irq_find_mapping(stmpe->domain, line); + + handle_nested_irq(nestedirq); + status &= ~(1 << bit); + } + + stmpe_reg_write(stmpe, israddr + i, clear); + } + + return IRQ_HANDLED; +} + +static void stmpe_irq_lock(struct irq_data *data) +{ + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); + + mutex_lock(&stmpe->irq_lock); +} + +static void stmpe_irq_sync_unlock(struct irq_data *data) +{ + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); + struct stmpe_variant_info *variant = stmpe->variant; + int num = DIV_ROUND_UP(variant->num_irqs, 8); + int i; + + for (i = 0; i < num; i++) { + u8 new = stmpe->ier[i]; + u8 old = stmpe->oldier[i]; + + if (new == old) + continue; + + stmpe->oldier[i] = new; + stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB + i], new); + } + + mutex_unlock(&stmpe->irq_lock); +} + +static void stmpe_irq_mask(struct irq_data *data) +{ + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); + int offset = data->hwirq; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe->ier[regoffset] &= ~mask; +} + +static void stmpe_irq_unmask(struct irq_data *data) +{ + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); + int offset = data->hwirq; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe->ier[regoffset] |= mask; +} + +static struct irq_chip stmpe_irq_chip = { + .name = "stmpe", + .irq_bus_lock = stmpe_irq_lock, + .irq_bus_sync_unlock = stmpe_irq_sync_unlock, + .irq_mask = stmpe_irq_mask, + .irq_unmask = stmpe_irq_unmask, +}; + +static int stmpe_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + struct stmpe *stmpe = d->host_data; + struct irq_chip *chip = NULL; + + if (stmpe->variant->id_val != STMPE801_ID) + chip = &stmpe_irq_chip; + + irq_set_chip_data(virq, stmpe); + irq_set_chip_and_handler(virq, chip, handle_edge_irq); + irq_set_nested_thread(virq, 1); + irq_set_noprobe(virq); + + return 0; +} + +static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq) +{ + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static const struct irq_domain_ops stmpe_irq_ops = { + .map = stmpe_irq_map, + .unmap = stmpe_irq_unmap, + .xlate = irq_domain_xlate_twocell, +}; + +static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np) +{ + int base = 0; + int num_irqs = stmpe->variant->num_irqs; + + stmpe->domain = irq_domain_add_simple(np, num_irqs, base, + &stmpe_irq_ops, stmpe); + if (!stmpe->domain) { + dev_err(stmpe->dev, "Failed to create irqdomain\n"); + return -ENOSYS; + } + + return 0; +} + +static int stmpe_chip_init(struct stmpe *stmpe) +{ + unsigned int irq_trigger = stmpe->pdata->irq_trigger; + int autosleep_timeout = stmpe->pdata->autosleep_timeout; + struct stmpe_variant_info *variant = stmpe->variant; + u8 icr = 0; + unsigned int id; + u8 data[2]; + int ret; + + ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID], + ARRAY_SIZE(data), data); + if (ret < 0) + return ret; + + id = (data[0] << 8) | data[1]; + if ((id & variant->id_mask) != variant->id_val) { + dev_err(stmpe->dev, "unknown chip id: %#x\n", id); + return -EINVAL; + } + + dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id); + + /* Disable all modules -- subdrivers should enable what they need. */ + ret = stmpe_disable(stmpe, ~0); + if (ret) + return ret; + + ret = stmpe_reset(stmpe); + if (ret < 0) + return ret; + + if (stmpe->irq >= 0) { + if (id == STMPE801_ID || id == STMPE1600_ID) + icr = STMPE_SYS_CTRL_INT_EN; + else + icr = STMPE_ICR_LSB_GIM; + + /* STMPE801 and STMPE1600 don't support Edge interrupts */ + if (id != STMPE801_ID && id != STMPE1600_ID) { + if (irq_trigger == IRQF_TRIGGER_FALLING || + irq_trigger == IRQF_TRIGGER_RISING) + icr |= STMPE_ICR_LSB_EDGE; + } + + if (irq_trigger == IRQF_TRIGGER_RISING || + irq_trigger == IRQF_TRIGGER_HIGH) { + if (id == STMPE801_ID || id == STMPE1600_ID) + icr |= STMPE_SYS_CTRL_INT_HI; + else + icr |= STMPE_ICR_LSB_HIGH; + } + } + + if (stmpe->pdata->autosleep) { + ret = stmpe_autosleep(stmpe, autosleep_timeout); + if (ret) + return ret; + } + + return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); +} + +static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell) +{ + return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, + NULL, 0, stmpe->domain); +} + +static int stmpe_devices_init(struct stmpe *stmpe) +{ + struct stmpe_variant_info *variant = stmpe->variant; + unsigned int platform_blocks = stmpe->pdata->blocks; + int ret = -EINVAL; + int i, j; + + for (i = 0; i < variant->num_blocks; i++) { + struct stmpe_variant_block *block = &variant->blocks[i]; + + if (!(platform_blocks & block->block)) + continue; + + for (j = 0; j < block->cell->num_resources; j++) { + struct resource *res = + (struct resource *) &block->cell->resources[j]; + + /* Dynamically fill in a variant's IRQ. */ + if (res->flags & IORESOURCE_IRQ) + res->start = res->end = block->irq + j; + } + + platform_blocks &= ~block->block; + ret = stmpe_add_device(stmpe, block->cell); + if (ret) + return ret; + } + + if (platform_blocks) + dev_warn(stmpe->dev, + "platform wants blocks (%#x) not present on variant", + platform_blocks); + + return ret; +} + +static void stmpe_of_probe(struct stmpe_platform_data *pdata, + struct device_node *np) +{ + struct device_node *child; + + pdata->id = of_alias_get_id(np, "stmpe-i2c"); + if (pdata->id < 0) + pdata->id = -1; + + of_property_read_u32(np, "st,autosleep-timeout", + &pdata->autosleep_timeout); + + pdata->autosleep = (pdata->autosleep_timeout) ? true : false; + + for_each_available_child_of_node(np, child) { + if (of_device_is_compatible(child, stmpe_gpio_cell.of_compatible)) + pdata->blocks |= STMPE_BLOCK_GPIO; + else if (of_device_is_compatible(child, stmpe_keypad_cell.of_compatible)) + pdata->blocks |= STMPE_BLOCK_KEYPAD; + else if (of_device_is_compatible(child, stmpe_ts_cell.of_compatible)) + pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN; + else if (of_device_is_compatible(child, stmpe_adc_cell.of_compatible)) + pdata->blocks |= STMPE_BLOCK_ADC; + else if (of_device_is_compatible(child, stmpe_pwm_cell.of_compatible)) + pdata->blocks |= STMPE_BLOCK_PWM; + } +} + +/* Called from client specific probe routines */ +int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) +{ + struct stmpe_platform_data *pdata; + struct device_node *np = ci->dev->of_node; + struct stmpe *stmpe; + struct gpio_desc *irq_gpio; + int ret; + u32 val; + + pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + stmpe_of_probe(pdata, np); + + if (of_find_property(np, "interrupts", NULL) == NULL) + ci->irq = -1; + + stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL); + if (!stmpe) + return -ENOMEM; + + mutex_init(&stmpe->irq_lock); + mutex_init(&stmpe->lock); + + if (!of_property_read_u32(np, "st,sample-time", &val)) + stmpe->sample_time = val; + if (!of_property_read_u32(np, "st,mod-12b", &val)) + stmpe->mod_12b = val; + if (!of_property_read_u32(np, "st,ref-sel", &val)) + stmpe->ref_sel = val; + if (!of_property_read_u32(np, "st,adc-freq", &val)) + stmpe->adc_freq = val; + + stmpe->dev = ci->dev; + stmpe->client = ci->client; + stmpe->pdata = pdata; + stmpe->ci = ci; + stmpe->partnum = partnum; + stmpe->variant = stmpe_variant_info[partnum]; + stmpe->regs = stmpe->variant->regs; + stmpe->num_gpios = stmpe->variant->num_gpios; + stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc"); + if (!IS_ERR(stmpe->vcc)) { + ret = regulator_enable(stmpe->vcc); + if (ret) + dev_warn(ci->dev, "failed to enable VCC supply\n"); + } + stmpe->vio = devm_regulator_get_optional(ci->dev, "vio"); + if (!IS_ERR(stmpe->vio)) { + ret = regulator_enable(stmpe->vio); + if (ret) + dev_warn(ci->dev, "failed to enable VIO supply\n"); + } + dev_set_drvdata(stmpe->dev, stmpe); + + if (ci->init) + ci->init(stmpe); + + irq_gpio = devm_gpiod_get_optional(ci->dev, "irq", GPIOD_ASIS); + ret = PTR_ERR_OR_ZERO(irq_gpio); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", ret); + return ret; + } + + if (irq_gpio) { + stmpe->irq = gpiod_to_irq(irq_gpio); + pdata->irq_trigger = gpiod_is_active_low(irq_gpio) ? + IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; + } else { + stmpe->irq = ci->irq; + pdata->irq_trigger = IRQF_TRIGGER_NONE; + } + + if (stmpe->irq < 0) { + /* use alternate variant info for no-irq mode, if supported */ + dev_info(stmpe->dev, + "%s configured in no-irq mode by platform data\n", + stmpe->variant->name); + if (!stmpe_noirq_variant_info[stmpe->partnum]) { + dev_err(stmpe->dev, + "%s does not support no-irq mode!\n", + stmpe->variant->name); + return -ENODEV; + } + stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum]; + } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) { + pdata->irq_trigger = irq_get_trigger_type(stmpe->irq); + } + + ret = stmpe_chip_init(stmpe); + if (ret) + return ret; + + if (stmpe->irq >= 0) { + ret = stmpe_irq_init(stmpe, np); + if (ret) + return ret; + + ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL, + stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT, + "stmpe", stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ: %d\n", + ret); + return ret; + } + } + + ret = stmpe_devices_init(stmpe); + if (!ret) + return 0; + + dev_err(stmpe->dev, "failed to add children\n"); + mfd_remove_devices(stmpe->dev); + + return ret; +} + +void stmpe_remove(struct stmpe *stmpe) +{ + if (!IS_ERR(stmpe->vio) && regulator_is_enabled(stmpe->vio)) + regulator_disable(stmpe->vio); + if (!IS_ERR(stmpe->vcc) && regulator_is_enabled(stmpe->vcc)) + regulator_disable(stmpe->vcc); + + __stmpe_disable(stmpe, STMPE_BLOCK_ADC); + + mfd_remove_devices(stmpe->dev); +} + +#ifdef CONFIG_PM +static int stmpe_suspend(struct device *dev) +{ + struct stmpe *stmpe = dev_get_drvdata(dev); + + if (stmpe->irq >= 0 && device_may_wakeup(dev)) + enable_irq_wake(stmpe->irq); + + return 0; +} + +static int stmpe_resume(struct device *dev) +{ + struct stmpe *stmpe = dev_get_drvdata(dev); + + if (stmpe->irq >= 0 && device_may_wakeup(dev)) + disable_irq_wake(stmpe->irq); + + return 0; +} + +const struct dev_pm_ops stmpe_dev_pm_ops = { + .suspend = stmpe_suspend, + .resume = stmpe_resume, +}; +#endif |